wifi: mac80211_hwsim: fix debugfs attribute ps with rc table support
Subsystems (7)
Sasha Levin
maintainerPATCH 1/8 wifi: mac80211_hwsim: fix debugfs attribute ps with rc table support
From: Jonas Jelonek <[email protected]>
[ Upstream commit 69188df5f6e4cecc6b76b958979ba363cd5240e8 ]
Fixes a warning that occurs when rc table support is enabled (IEEE80211_HW_SUPPORTS_RC_TABLE) in mac80211_hwsim and the PS mode is changed via the exported debugfs attribute.
When the PS mode is changed, a packet is broadcasted via hwsim_send_nullfunc by creating and transmitting a plain skb with only header initialized. The ieee80211 rate array in the control buffer is zero-initialized. When ratetbl support is enabled, ieee80211_get_tx_rates is called for the skb with sta parameter set to NULL and thus no ratetbl can be used. The final rate array then looks like [-1,0; 0,0; 0,0; 0,0] which causes the warning in ieee80211_get_tx_rate.
The issue is fixed by setting the count of the first rate with idx '0' to 1 and hence ieee80211_get_tx_rates won't overwrite it with idx '-1'.
--- drivers/net/wireless/mac80211_hwsim.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/net/wireless/mac80211_hwsim.c +5 -0
@@ -686,6 +686,7 @@ static void hwsim_send_nullfunc(struct mac80211_hwsim_data *data, u8 *mac,struct hwsim_vif_priv *vp = (void *)vif->drv_priv;struct sk_buff *skb;struct ieee80211_hdr *hdr; +struct ieee80211_tx_info *cb;if (!vp->assoc)return ;
@@ -707,6 +708,10 @@ static void hwsim_send_nullfunc(struct mac80211_hwsim_data *data, u8 *mac,memcpy (hdr->addr2, mac,ETH_ALEN );memcpy (hdr->addr3, vp->bssid,ETH_ALEN ); + cb =IEEE80211_SKB_CB (skb); + cb->control.rates[0 ].count =1 ; + cb->control.rates[1 ].idx =-1 ; +rcu_read_lock ();mac80211_hwsim_tx_frame (data->hw, skb,rcu_dereference (vif->chanctx_conf)->def.chan);
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 2/8 audit: fix undefined behavior in bit shift for AUDIT_BIT
From: Gaosheng Cui <[email protected]>
[ Upstream commit 986d93f55bdeab1cac858d1e47b41fac10b2d7f6 ]
Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in kernel/auditfilter.c:179:23 left shift of 1 by 31 places cannot be represented in type 'int' Call Trace: <TASK> dump_stack_lvl+0x7d/0xa5 dump_stack+0x15/0x1b ubsan_epilogue+0xe/0x4e __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c audit_register_class+0x9d/0x137 audit_classes_init+0x4d/0xb8 do_one_initcall+0x76/0x430 kernel_init_freeable+0x3b3/0x422 kernel_init+0x24/0x1e0 ret_from_fork+0x1f/0x30 </TASK>
--- include/uapi/linux/audit.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/uapi/linux/audit.h +1 -1
@@ -177,7 +177,7 @@#define AUDIT_MAX_KEY_LEN 256#define AUDIT_BITMASK_SIZE 64#define AUDIT_WORD (nr) ((__u32)((nr)/32)) -#define AUDIT_BIT (nr) (1 << ((nr) - AUDIT_WORD(nr)*32)) +#define AUDIT_BIT (nr) (1U << ((nr) - AUDIT_WORD(nr)*32))#define AUDIT_SYSCALL_CLASSES 16#define AUDIT_CLASS_DIR_WRITE 0
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 3/8 wifi: mac80211: Fix ack frame idr leak when mesh has no route
In reply to Sasha LevinFrom: Nicolas Cavallari <[email protected]>
[ Upstream commit 39e7b5de9853bd92ddbfa4b14165babacd7da0ba ]
When trying to transmit an data frame with tx_status to a destination that have no route in the mesh, then it is dropped without recrediting the ack_status_frames idr.
Once it is exhausted, wpa_supplicant starts failing to do SAE with NL80211_CMD_FRAME and logs "nl80211: Frame command failed".
Use ieee80211_free_txskb() instead of kfree_skb() to fix it.
--- net/mac80211/mesh_pathtbl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/mac80211/mesh_pathtbl.c +1 -1
@@ -731,7 +731,7 @@ int mesh_path_send_to_gates(struct mesh_path *mpath)void mesh_path_discard_frame (struct ieee80211_sub_if_data *sdata,struct sk_buff *skb) { -kfree_skb (skb); +ieee80211_free_txskb (&sdata->local->hw, skb); sdata->u.mesh.mshstats.dropped_frames_no_route++; }
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 4/8 spi: stm32: fix stm32_spi_prepare_mbr() that halves spi clk for every run
In reply to Sasha LevinFrom: Sean Nyekjaer <[email protected]>
[ Upstream commit 62aa1a344b0904549f6de7af958e8a1136fd5228 ]
When this driver is used with a driver that uses preallocated spi_transfer structs. The speed_hz is halved by every run. This results in:
spi_stm32 44004000.spi: SPI transfer setup failed
ads7846 spi0.0: SPI transfer failed: -22
Example when running with DIV_ROUND_UP():
- First run; speed_hz = 1000000, spi->clk_rate 125000000
div 125 -> mbrdiv = 7, cur_speed = 976562
- Second run; speed_hz = 976562
div 128,00007 (roundup to 129) -> mbrdiv = 8, cur_speed = 488281
- Third run; speed_hz = 488281
div 256,000131072067109 (roundup to 257) and then -EINVAL is returned.
Use DIV_ROUND_CLOSEST to allow to round down and allow us to keep the set speed.
--- drivers/spi/spi-stm32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/spi/spi-stm32.c +1 -1
@@ -255,7 +255,7 @@ static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz)u32 div, mbrdiv;/* Ensure spi->clk_rate is even */ - div =DIV_ROUND_UP (spi->clk_rate & ~0x1 , speed_hz); + div =DIV_ROUND_CLOSEST (spi->clk_rate & ~0x1 , speed_hz);/* * SPI framework set xfer->speed_hz to master->max_speed_hz if
Signature · 7 lines
2.35.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Sasha Levin
maintainerPATCH 5/8 ACPI: video: Add backlight=native DMI quirk for Dell G15 5515
In reply to Sasha LevinFrom: Hans de Goede <[email protected]>
[ Upstream commit f46acc1efd4b5846de9fa05f966e504f328f34a6 ]
The Dell G15 5515 has the WMI interface (and WMI call returns) expected by the nvidia-wmi-ec-backlight interface. But the backlight class device registered by the nvidia-wmi-ec-backlight driver does not actually work.
The amdgpu_bl0 native GPU backlight class device does actually work, add a backlight=native DMI quirk for this.
---
Changes in v2:
- Add a comment that this needs to be revisited when dynamic-mux support gets added (suggested by: Daniel Dadap)
--- drivers/acpi/video_detect.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
drivers/acpi/video_detect.c +14 -0
@@ -511,6 +511,20 @@ static const struct dmi_system_id video_detect_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "GMxRGxx"), }, }, +/* +* Models which have nvidia-ec-wmi support, but should not use it. +* Note this indicates a likely firmware bug on these models and should +* be revisited if/when Linux gets support for dynamic mux mode. +*/ + { + .callback = video_detect_force_native, + /* Dell G15 5515 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5515"), + }, + }, + /* * Desktops which falsely report a backlight and which our heuristics * for this do not catch.
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 6/8 drm: panel-orientation-quirks: Add quirk for Acer Switch V 10 (SW5-017)
In reply to Sasha LevinFrom: Hans de Goede <[email protected]>
[ Upstream commit 653f2d94fcda200b02bd79cea2e0307b26c1b747 ]
Like the Acer Switch One 10 S1003, for which there already is a quirk, the Acer Switch V 10 (SW5-017) has a 800x1280 portrait screen mounted in the tablet part of a landscape oriented 2-in-1. Add a quirk for this.
--- drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/gpu/drm/drm_panel_orientation_quirks.c +6 -0
@@ -95,6 +95,12 @@ static const struct dmi_system_id orientation_data[] = { DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "One S1003"), }, .driver_data = (void *)&lcd800x1280_rightside_up, + }, { /* Acer Switch V 10 (SW5-017) */ + .matches = { +DMI_EXACT_MATCH (DMI_SYS_VENDOR ,"Acer" ), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "SW5-017"), + }, + .driver_data = (void *)&lcd800x1280_rightside_up, }, { /* Anbernic Win600 */ .matches = { DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Anbernic"),
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 7/8 RISC-V: vdso: Do not add missing symbols to version section in linker script
In reply to Sasha LevinFrom: Nathan Chancellor <[email protected]>
[ Upstream commit fcae44fd36d052e956e69a64642fc03820968d78 ]
Recently, ld.lld moved from '--undefined-version' to '--no-undefined-version' as the default, which breaks the compat vDSO build:
ld.lld: error: version script assignment of 'LINUX_4.15' to symbol '__vdso_gettimeofday' failed: symbol not defined ld.lld: error: version script assignment of 'LINUX_4.15' to symbol '__vdso_clock_gettime' failed: symbol not defined ld.lld: error: version script assignment of 'LINUX_4.15' to symbol '__vdso_clock_getres' failed: symbol not defined
These symbols are not present in the compat vDSO or the regular vDSO for 32-bit but they are unconditionally included in the version section of the linker script, which is prohibited with '--no-undefined-version'.
Fix this issue by only including the symbols that are actually exported in the version section of the linker script.
--- arch/riscv/kernel/vdso/Makefile | 3 +++ arch/riscv/kernel/vdso/vdso.lds.S | 2 ++ 2 files changed, 5 insertions(+)
arch/riscv/kernel/vdso/Makefile +3 -0
@@ -17,6 +17,9 @@ obj-vdso := $(addprefix $(obj)/, $(obj-vdso)) obj-y += vdso.o vdso-syms.o CPPFLAGS_vdso.lds += -P -C -U$(ARCH) +ifneq ($(filter vgettimeofday, $(vdso-syms)),) +CPPFLAGS_vdso.lds += -DHAS_VGETTIMEOFDAY +endif # Disable gcov profiling for VDSO code GCOV_PROFILE := n
arch/riscv/kernel/vdso/vdso.lds.S +2 -0
@@ -70,9 +70,11 @@ VERSION LINUX_4.15 { global: __vdso_rt_sigreturn; +#ifdef HAS_VGETTIMEOFDAY __vdso_gettimeofday; __vdso_clock_gettime; __vdso_clock_getres; +#endif __vdso_getcpu; __vdso_flush_icache; local: *;
Signature · 7 lines
2.35.1 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
Sasha Levin
maintainerPATCH 8/8 MIPS: pic32: treat port as signed integer
In reply to Sasha LevinFrom: "Jason A. Donenfeld" <[email protected]>
[ Upstream commit 648060902aa302331b5d6e4f26d8ee0761d239ab ]
get_port_from_cmdline() returns an int, yet is assigned to a char, which is wrong in its own right, but also, with char becoming unsigned, this poses problems, because -1 is used as an error value. Further complicating things, fw_init_early_console() is only ever called with a -1 argument. Fix this up by removing the unused argument from fw_init_early_console() and treating port as a proper signed integer.
--- arch/mips/include/asm/fw/fw.h | 2 +- arch/mips/pic32/pic32mzda/early_console.c | 13 ++++++------- arch/mips/pic32/pic32mzda/init.c | 2 +- 3 files changed, 8 insertions(+), 9 deletions(-)
arch/mips/include/asm/fw/fw.h +1 -1
@@ -26,6 +26,6 @@ extern char *fw_getcmdline(void);extern void fw_meminit (void );extern char *fw_getenv (char *name);extern unsigned long fw_getenvl (char *name); -extern void fw_init_early_console (char port); +extern void fw_init_early_console (void );#endif /* __ASM_FW_H_ */
arch/mips/pic32/pic32mzda/early_console.c +6 -7
@@ -35,7 +35,7 @@#define U_BRG (x) (UART_BASE(x) + 0x40)static void __iomem *uart_base; -static char console_port =-1 ; +static int console_port =-1 ;static int __init configure_uart_pins (int port) {
@@ -55,7 +55,7 @@ static int __init configure_uart_pins(int port)return 0 ; } -static void __init configure_uart (char port,int baud) +static void __init configure_uart (int port,int baud) {u32 pbclk;
@@ -68,7 +68,7 @@ static void __init configure_uart(char port, int baud) uart_base + PIC32_SET(U_STA(port))); } -static void __init setup_early_console (char port,int baud) +static void __init setup_early_console (int port,int baud) {if (configure_uart_pins (port))return ;
@@ -138,16 +138,15 @@ static int __init get_baud_from_cmdline(char *arch_cmdline)return baud; } -void __init fw_init_early_console (char port) +void __init fw_init_early_console (void ) {char *arch_cmdline =pic32_getcmdline (); -int baud =-1 ; +int baud, port; uart_base =ioremap_nocache (PIC32_BASE_UART ,0xc00 ); baud =get_baud_from_cmdline (arch_cmdline); -if (port ==-1 ) - port =get_port_from_cmdline (arch_cmdline); + port =get_port_from_cmdline (arch_cmdline);if (port ==-1 ) port =EARLY_CONSOLE_PORT ;
arch/mips/pic32/pic32mzda/init.c +1 -1
@@ -68,7 +68,7 @@ void __init plat_mem_setup(void)strlcpy (arcs_cmdline, boot_command_line,COMMAND_LINE_SIZE );#ifdef CONFIG_EARLY_PRINTK -fw_init_early_console (-1 ); +fw_init_early_console ();#endif pic32_config_init (); }
Signature · 1 line
2.35.1