Skip to contentSkip to conversation

wifi: mac80211_hwsim: fix debugfs attribute ps with rc table support

PATCH New Sasha Levin 1 participant 4 messages Nov 19, 2022

Subsystems (4)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/4 wifi: mac80211_hwsim: fix debugfs attribute ps with rc table support

From: Jonas Jelonek <[email protected]>

[ Upstream commit 69188df5f6e4cecc6b76b958979ba363cd5240e8 ]

Fixes a warning that occurs when rc table support is enabled (IEEE80211_HW_SUPPORTS_RC_TABLE) in mac80211_hwsim and the PS mode is changed via the exported debugfs attribute.

When the PS mode is changed, a packet is broadcasted via hwsim_send_nullfunc by creating and transmitting a plain skb with only header initialized. The ieee80211 rate array in the control buffer is zero-initialized. When ratetbl support is enabled, ieee80211_get_tx_rates is called for the skb with sta parameter set to NULL and thus no ratetbl can be used. The final rate array then looks like [-1,0; 0,0; 0,0; 0,0] which causes the warning in ieee80211_get_tx_rate.

The issue is fixed by setting the count of the first rate with idx '0' to 1 and hence ieee80211_get_tx_rates won't overwrite it with idx '-1'.

---
 drivers/net/wireless/mac80211_hwsim.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/net/wireless/mac80211_hwsim.c +5 -0
index 70251c703c9e..53e0fec274a4 100644
@@ -671,6 +671,7 @@ static void hwsim_send_nullfunc(struct mac80211_hwsim_data *data, u8 *mac,
 	struct hwsim_vif_priv *vp = (void *)vif->drv_priv;
 	struct sk_buff *skb;
 	struct ieee80211_hdr *hdr;
+	struct ieee80211_tx_info *cb;
 
 	if (!vp->assoc)
 		return;
@@ -691,6 +692,10 @@ static void hwsim_send_nullfunc(struct mac80211_hwsim_data *data, u8 *mac,
 	memcpy(hdr->addr2, mac, ETH_ALEN);
 	memcpy(hdr->addr3, vp->bssid, ETH_ALEN);
 
+	cb = IEEE80211_SKB_CB(skb);
+	cb->control.rates[0].count = 1;
+	cb->control.rates[1].idx = -1;
+
 	rcu_read_lock();
 	mac80211_hwsim_tx_frame(data->hw, skb,
 				rcu_dereference(vif->chanctx_conf)->def.chan);
Signature · 1 line
2.35.1
author maintainer
#1 lore raw

PATCH 2/4 audit: fix undefined behavior in bit shift for AUDIT_BIT

From: Gaosheng Cui <[email protected]>

[ Upstream commit 986d93f55bdeab1cac858d1e47b41fac10b2d7f6 ]

Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below:

UBSAN: shift-out-of-bounds in kernel/auditfilter.c:179:23
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
 <TASK>
 dump_stack_lvl+0x7d/0xa5
 dump_stack+0x15/0x1b
 ubsan_epilogue+0xe/0x4e
 __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
 audit_register_class+0x9d/0x137
 audit_classes_init+0x4d/0xb8
 do_one_initcall+0x76/0x430
 kernel_init_freeable+0x3b3/0x422
 kernel_init+0x24/0x1e0
 ret_from_fork+0x1f/0x30
 </TASK>
[PM: remove bad 'Fixes' tag as issue predates git, added in v2.6.6-rc1]
---
 include/uapi/linux/audit.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/uapi/linux/audit.h +1 -1
index 208df7b44e90..d7ac6b9be18e 100644
@@ -170,7 +170,7 @@
 #define AUDIT_MAX_KEY_LEN  256
 #define AUDIT_BITMASK_SIZE 64
 #define AUDIT_WORD(nr) ((__u32)((nr)/32))
-#define AUDIT_BIT(nr)  (1 << ((nr) - AUDIT_WORD(nr)*32))
+#define AUDIT_BIT(nr)  (1U << ((nr) - AUDIT_WORD(nr)*32))
 
 #define AUDIT_SYSCALL_CLASSES 16
 #define AUDIT_CLASS_DIR_WRITE 0
Signature · 1 line
2.35.1
author maintainer
#2 lore raw

PATCH 3/4 wifi: mac80211: Fix ack frame idr leak when mesh has no route

In reply to Sasha Levin

From: Nicolas Cavallari <[email protected]>

[ Upstream commit 39e7b5de9853bd92ddbfa4b14165babacd7da0ba ]

When trying to transmit an data frame with tx_status to a destination that have no route in the mesh, then it is dropped without recrediting the ack_status_frames idr.

Once it is exhausted, wpa_supplicant starts failing to do SAE with NL80211_CMD_FRAME and logs "nl80211: Frame command failed".

Use ieee80211_free_txskb() instead of kfree_skb() to fix it.

---
 net/mac80211/mesh_pathtbl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/mac80211/mesh_pathtbl.c +1 -1
index 30a95a2ff196..78945dc9dcd7 100644
@@ -794,7 +794,7 @@ int mesh_path_send_to_gates(struct mesh_path *mpath)
 void mesh_path_discard_frame(struct ieee80211_sub_if_data *sdata,
 			     struct sk_buff *skb)
 {
-	kfree_skb(skb);
+	ieee80211_free_txskb(&sdata->local->hw, skb);
 	sdata->u.mesh.mshstats.dropped_frames_no_route++;
 }
 
Signature · 1 line
2.35.1
author maintainer
#3 lore raw

PATCH 4/4 MIPS: pic32: treat port as signed integer

In reply to Sasha Levin

From: "Jason A. Donenfeld" <[email protected]>

[ Upstream commit 648060902aa302331b5d6e4f26d8ee0761d239ab ]

get_port_from_cmdline() returns an int, yet is assigned to a char, which is wrong in its own right, but also, with char becoming unsigned, this poses problems, because -1 is used as an error value. Further complicating things, fw_init_early_console() is only ever called with a -1 argument. Fix this up by removing the unused argument from fw_init_early_console() and treating port as a proper signed integer.

---
 arch/mips/include/asm/fw/fw.h             |  2 +-
 arch/mips/pic32/pic32mzda/early_console.c | 13 ++++++-------
 arch/mips/pic32/pic32mzda/init.c          |  2 +-
 3 files changed, 8 insertions(+), 9 deletions(-)
arch/mips/include/asm/fw/fw.h +1 -1
index d0ef8b4892bb..d0494ce4b337 100644
@@ -26,6 +26,6 @@ extern char *fw_getcmdline(void);
 extern void fw_meminit(void);
 extern char *fw_getenv(char *name);
 extern unsigned long fw_getenvl(char *name);
-extern void fw_init_early_console(char port);
+extern void fw_init_early_console(void);
 
 #endif /* __ASM_FW_H_ */
arch/mips/pic32/pic32mzda/early_console.c +6 -7
index d7b783463fac..4933c5337059 100644
@@ -34,7 +34,7 @@
 #define U_BRG(x)	(UART_BASE(x) + 0x40)
 
 static void __iomem *uart_base;
-static char console_port = -1;
+static int console_port = -1;
 
 static int __init configure_uart_pins(int port)
 {
@@ -54,7 +54,7 @@ static int __init configure_uart_pins(int port)
 	return 0;
 }
 
-static void __init configure_uart(char port, int baud)
+static void __init configure_uart(int port, int baud)
 {
 	u32 pbclk;
 
@@ -67,7 +67,7 @@ static void __init configure_uart(char port, int baud)
 		     uart_base + PIC32_SET(U_STA(port)));
 }
 
-static void __init setup_early_console(char port, int baud)
+static void __init setup_early_console(int port, int baud)
 {
 	if (configure_uart_pins(port))
 		return;
@@ -137,16 +137,15 @@ static int __init get_baud_from_cmdline(char *arch_cmdline)
 	return baud;
 }
 
-void __init fw_init_early_console(char port)
+void __init fw_init_early_console(void)
 {
 	char *arch_cmdline = pic32_getcmdline();
-	int baud = -1;
+	int baud, port;
 
 	uart_base = ioremap_nocache(PIC32_BASE_UART, 0xc00);
 
 	baud = get_baud_from_cmdline(arch_cmdline);
-	if (port == -1)
-		port = get_port_from_cmdline(arch_cmdline);
+	port = get_port_from_cmdline(arch_cmdline);
 
 	if (port == -1)
 		port = EARLY_CONSOLE_PORT;
arch/mips/pic32/pic32mzda/init.c +1 -1
index 406c6c5cec29..cf2625551b45 100644
@@ -68,7 +68,7 @@ void __init plat_mem_setup(void)
 		strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
 
 #ifdef CONFIG_EARLY_PRINTK
-	fw_init_early_console(-1);
+	fw_init_early_console();
 #endif
 	pic32_config_init();
 }
Signature · 1 line
2.35.1