dt-bindings: input: gpio-beeper: Convert to yaml schema
Subsystems (3)
PATCH 1/1 dt-bindings: input: gpio-beeper: Convert to yaml schema
From: Fabio Estevam <[email protected]>
Convert the bindings from plain text to yaml schema.
Signed-off-by Fabio Estevam <[email protected]>
--- .../devicetree/bindings/input/gpio-beeper.txt | 13 -------- .../bindings/input/gpio-beeper.yaml | 33 +++++++++++++++++++ 2 files changed, 33 insertions(+), 13 deletions(-) delete mode 100644 Documentation/devicetree/bindings/input/gpio-beeper.txt create mode 100644 Documentation/devicetree/bindings/input/gpio-beeper.yaml
Documentation/devicetree/bindings/input/gpio-beeper.txt deleted +0 -13
@@ -1,13 +0,0 @@ -* GPIO beeper device tree bindings - -Register a beeper connected to GPIO pin. - -Required properties: -- compatible: Should be "gpio-beeper". -- gpios: From common gpio binding; gpio connection to beeper enable pin. - -Example: - beeper: beeper { - compatible = "gpio-beeper"; - gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; - };
Documentation/devicetree/bindings/input/gpio-beeper.yaml new file +33 -0
@@ -0,0 +1,33 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/gpio-beeper.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO controlled beeper + +maintainers: + - Fabio Estevam <[email protected]> + +properties: + compatible: + const: gpio-beeper + + gpios: + maxItems: 1 + description: + GPIO that drives the beeper. + +required: + - compatible + - gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + beeper { + compatible = "gpio-beeper"; + gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + };
Signature · 1 line
2.25.1
Quoted 5 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
Convert the bindings from plain text to yaml schema.
Signed-off-by Fabio Estevam <[email protected]>
Small nit below, but I don't think it matters, so:
Reviewed-by Mattijs Korpershoek <[email protected]>
Quoted 41 lines
--- .../devicetree/bindings/input/gpio-beeper.txt | 13 -------- .../bindings/input/gpio-beeper.yaml | 33 +++++++++++++++++++ 2 files changed, 33 insertions(+), 13 deletions(-) delete mode 100644 Documentation/devicetree/bindings/input/gpio-beeper.txt create mode 100644 Documentation/devicetree/bindings/input/gpio-beeper.yamlDocumentation/devicetree/bindings/input/gpio-beeper.txt deleted +0
-13@@ -1,13 +0,0 @@ -* GPIO beeper device tree bindings - -Register a beeper connected to GPIO pin. - -Required properties: -- compatible: Should be "gpio-beeper". -- gpios: From common gpio binding; gpio connection to beeper enable pin. - -Example: - beeper: beeper { - compatible = "gpio-beeper"; - gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; - };Documentation/devicetree/bindings/input/gpio-beeper.yaml new file +9
-0@@ -0,0 +1,33 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/gpio-beeper.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO controlled beeper + +maintainers:
Documentation/devicetree/bindings/input/gpio-beeper.yaml line 19
Quoted 10 lines
Documentation/devicetree/bindings/input/gpio-beeper.yaml new file +10
-0+ - Fabio Estevam <[email protected]> + +properties: + compatible: + const: gpio-beeper + + gpios: + maxItems: 1 + description: + GPIO that drives the beeper.
We can join these lines:
description: GPIO that drives the beeper.
Quoted 16 lines
Documentation/devicetree/bindings/input/gpio-beeper.yaml new file +14
-0+ +required: + - compatible + - gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + beeper { + compatible = "gpio-beeper"; + gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + };Signature · 1 line
2.25.1
Quoted 10 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
Convert the bindings from plain text to yaml schema.
Signed-off-by Fabio Estevam <[email protected]>--- .../devicetree/bindings/input/gpio-beeper.txt | 13 -------- .../bindings/input/gpio-beeper.yaml | 33 +++++++++++++++++++ 2 files changed, 33 insertions(+), 13 deletions(-) delete mode 100644 Documentation/devicetree/bindings/input/gpio-beeper.txt
Somehow I missed this. Apologies for late reply.
Reviewed-by Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
Quoted 5 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
Convert the bindings from plain text to yaml schema.
Signed-off-by Fabio Estevam <[email protected]>
Applied, thank you.
Signature · 1 line
Dmitry