Skip to contentSkip to conversation

mips: dts: brcm: bcm7435: add "interrupt-names" for NAND controller

PATCH Applied Rafał Miłecki 3 participants 3 messages Nov 8, 2022 – Nov 21, 2022

Subsystems (3)
Device tree bindings MIPS Broadcom bmips MIPS architecture
lore
Share & tools
lore

Rafał Miłecki

author
#0 lore raw

PATCH 1/1 mips: dts: brcm: bcm7435: add "interrupt-names" for NAND controller

From: Rafał Miłecki <[email protected]>

Second interrupt can be DMA or EDU one. Specify it explicitly using interrupt-names property. This matches documented binding.

Signed-off-by Rafał Miłecki <[email protected]>
---
 arch/mips/boot/dts/brcm/bcm7435.dtsi | 1 +
 1 file changed, 1 insertion(+)
arch/mips/boot/dts/brcm/bcm7435.dtsi +1 -0
index 8c001b944c8b..cfdf9804e126 100644
@@ -422,6 +422,7 @@ nand: nand@41c800 {
 			reg = <0x41c800 0x600>, <0x41d000 0x100>;
 			interrupt-parent = <&hif_l2_intc>;
 			interrupts = <24>, <4>;
+			interrupt-names = "nand_ctlrdy", "flash_dma_done";
 			status = "disabled";
 		};
Signature · 1 line
2.34.1
maintainer Applied
#2 lore raw
In reply to Rafał Miłecki
Quoted 24 lines · Rafał Miłecki

From: Rafał Miłecki <[email protected]>

Second interrupt can be DMA or EDU one. Specify it explicitly using interrupt-names property. This matches documented binding.

Signed-off-by Rafał Miłecki <[email protected]>
---
 arch/mips/boot/dts/brcm/bcm7435.dtsi | 1 +
 1 file changed, 1 insertion(+)
arch/mips/boot/dts/brcm/bcm7435.dtsi +1 -0
index 8c001b944c8b..cfdf9804e126 100644
@@ -422,6 +422,7 @@ nand: nand@41c800 {
 			reg = <0x41c800 0x600>, <0x41d000 0x100>;
 			interrupt-parent = <&hif_l2_intc>;
 			interrupts = <24>, <4>;
+			interrupt-names = "nand_ctlrdy", "flash_dma_done";
 			status = "disabled";
 		};
Signature · 1 line
2.34.1

applied to mips-next.

Thomas.

Signature · 2 lines
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]