Skip to contentSkip to conversation

drivers: watchdog: Enhance watchdog support in SPL for Stratix 10 and Agilex

PATCH In review Jit Loon Lim 2 participants 5 messages Nov 22, 2022 – Jan 18, 2023

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 drivers: watchdog: Enhance watchdog support in SPL for Stratix 10 and Agilex

From: Siew Chin Lim <[email protected]>

Change watchdog default timeout to 10 seconds and enable watchdog before initializing other component (example: DDR). Thus, watchdog need to be fully executed in onchip ram.

---
 arch/arm/mach-socfpga/spl_agilex.c | 17 +++++++++--------
 arch/arm/mach-socfpga/spl_s10.c    | 14 +++++++-------
 drivers/watchdog/Kconfig           |  2 +-
 3 files changed, 17 insertions(+), 16 deletions(-)
arch/arm/mach-socfpga/spl_agilex.c +9 -8
index ee5a9dc1e2..c279f97cea 100644
@@ -20,7 +20,7 @@
 #include <asm/arch/misc.h>
 #include <asm/arch/reset_manager.h>
 #include <asm/arch/system_manager.h>
-#include <watchdog.h>
+#include <wdt.h>
 #include <dm/uclass.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -40,13 +40,6 @@ void board_init_f(ulong dummy)
 	writel(SYSMGR_WDDBG_PAUSE_ALL_CPU,
 	       socfpga_get_sysmgr_addr() + SYSMGR_SOC64_WDDBG);
 
-#ifdef CONFIG_HW_WATCHDOG
-	/* Enable watchdog before initializing the HW */
-	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 1);
-	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 0);
-	hw_watchdog_init();
-#endif
-
 	/* ensure all processors are not released prior Linux boot */
 	writeq(0, CPU_RELEASE_ADDR);
 
@@ -60,6 +53,14 @@ void board_init_f(ulong dummy)
 		hang();
 	}
 
+	/*
+	 * Enable watchdog as early as possible before initializing other
+	 * component. Watchdog need to be enabled after clock driver because
+	 * it will retrieve the clock frequency from clock driver.
+	 */
+	if (CONFIG_IS_ENABLED(WDT))
+		initr_watchdog();
+
 	preloader_console_init();
 	print_reset_info();
 	cm_print_clock_quick_summary();
arch/arm/mach-socfpga/spl_s10.c +7 -7
index c20e87cdbe..4044dc335e 100644
@@ -21,7 +21,7 @@
 #include <asm/arch/misc.h>
 #include <asm/arch/reset_manager.h>
 #include <asm/arch/system_manager.h>
-#include <watchdog.h>
+#include <wdt.h>
 #include <dm/uclass.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -41,12 +41,12 @@ void board_init_f(ulong dummy)
 	writel(SYSMGR_WDDBG_PAUSE_ALL_CPU,
 	       socfpga_get_sysmgr_addr() + SYSMGR_SOC64_WDDBG);
 
-#ifdef CONFIG_HW_WATCHDOG
-	/* Enable watchdog before initializing the HW */
-	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 1);
-	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 0);
-	hw_watchdog_init();
-#endif
+	/*
+	 * Enable watchdog as early as possible before initializing other
+	 * component.
+	 */
+	if (CONFIG_IS_ENABLED(WDT))
+		initr_watchdog();
 
 	/* ensure all processors are not released prior Linux boot */
 	writeq(0, CPU_RELEASE_ADDR);
drivers/watchdog/Kconfig +1 -1
index 50e6a1efba..a6c242ac9d 100644
@@ -27,7 +27,7 @@ config WATCHDOG_TIMEOUT_MSECS
 	int "Watchdog timeout in msec"
 	default 128000 if ARCH_MX31 || ARCH_MX5 || ARCH_MX6
 	default 128000 if ARCH_MX7 || ARCH_VF610
-	default 30000 if ARCH_SOCFPGA
+	default 10000 if ARCH_SOCFPGA
 	default 16000 if ARCH_SUNXI
 	default 60000
 	help
Signature · 1 line
2.26.2
#1 lore raw

PATCH 2/2 drivers: watchdog: Enhance watchdog support in SPL for N5X

From: Siew Chin Lim <[email protected]>

Enable watchdog before initializing other component (example: DDR). Thus, watchdog need to be fully executed in onchip ram.

---
 arch/arm/mach-socfpga/spl_n5x.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)
arch/arm/mach-socfpga/spl_n5x.c +10 -7
index d056871d29..c56b5a1b88 100644
@@ -21,6 +21,8 @@
 #include <init.h>
 #include <spl.h>
 #include <watchdog.h>
+#include <asm/arch/smmu_s10.h>
+#include <wdt.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -39,13 +41,6 @@ void board_init_f(ulong dummy)
 	writel(SYSMGR_WDDBG_PAUSE_ALL_CPU,
 	       socfpga_get_sysmgr_addr() + SYSMGR_SOC64_WDDBG);
 
-#ifdef CONFIG_HW_WATCHDOG
-	/* Enable watchdog before initializing the HW */
-	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 1);
-	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 0);
-	hw_watchdog_init();
-#endif
-
 	/* ensure all processors are not released prior Linux boot */
 	writeq(0, CPU_RELEASE_ADDR);
 
@@ -67,6 +62,14 @@ void board_init_f(ulong dummy)
 		hang();
 	}
 
+	/*
+	 * Enable watchdog as early as possible before initializing other
+	 * component. Watchdog need to be enabled after clock driver because
+	 * it will retrieve the clock frequency from clock driver.
+	 */
+	if (CONFIG_IS_ENABLED(WDT))
+		initr_watchdog();
+
 	print_reset_info();
 	cm_print_clock_quick_summary();
 
Signature · 1 line
2.26.2
#2 lore raw
In reply to Jit Loon Lim
Quoted 5 lines · Jit Loon Lim

From: Siew Chin Lim <[email protected]>

Change watchdog default timeout to 10 seconds and enable watchdog before initializing other component (example: DDR). Thus, watchdog need to be fully executed in onchip ram.

Please find some comments below.

Quoted 22 lines
---
  arch/arm/mach-socfpga/spl_agilex.c | 17 +++++++++--------
  arch/arm/mach-socfpga/spl_s10.c    | 14 +++++++-------
  drivers/watchdog/Kconfig           |  2 +-
  3 files changed, 17 insertions(+), 16 deletions(-)
arch/arm/mach-socfpga/spl_agilex.c +1 -1
index ee5a9dc1e2..c279f97cea 100644
@@ -20,7 +20,7 @@
  #include <asm/arch/misc.h>
  #include <asm/arch/reset_manager.h>
  #include <asm/arch/system_manager.h>
-#include <watchdog.h>
+#include <wdt.h>
  #include <dm/uclass.h>
 
  DECLARE_GLOBAL_DATA_PTR;

arch/arm/mach-socfpga/spl_agilex.c void board_init_f(ulong dummy) · line 49

Quoted 10 lines
arch/arm/mach-socfpga/spl_agilex.c +0 -7
@@ -40,13 +40,6 @@ void board_init_f(ulong dummy)
  	writel(SYSMGR_WDDBG_PAUSE_ALL_CPU,
  	       socfpga_get_sysmgr_addr() + SYSMGR_SOC64_WDDBG);
 
-#ifdef CONFIG_HW_WATCHDOG
-	/* Enable watchdog before initializing the HW */
-	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 1);
-	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 0);
-	hw_watchdog_init();
-#endif
-

The patch also removes the CONFIG_HW_WATCHDOG stuff, which is probably unused right now. Could you please also mention this in the commit message?

Quoted 5 lines
arch/arm/mach-socfpga/spl_agilex.c +0 -0
  	/* ensure all processors are not released prior Linux boot */
  	writeq(0, CPU_RELEASE_ADDR);
 
@@ -60,6 +53,14 @@ void board_init_f(ulong dummy)
  		hang();

arch/arm/mach-socfpga/spl_agilex.c void board_init_f(ulong dummy) · line 63

Quoted 10 lines
arch/arm/mach-socfpga/spl_agilex.c +8 -0
  	}
 
+	/*
+	 * Enable watchdog as early as possible before initializing other
+	 * component. Watchdog need to be enabled after clock driver because
+	 * it will retrieve the clock frequency from clock driver.
+	 */
+	if (CONFIG_IS_ENABLED(WDT))
+		initr_watchdog();
+

initr_watchdog() will get called from spl/common/spl/spl.c:
board_init_r(). Is this too late? How much time passes between these two code path's?

Thanks,
Stefan

Quoted 40 lines
arch/arm/mach-socfpga/spl_agilex.c +0 -0
  	preloader_console_init();
  	print_reset_info();
  	cm_print_clock_quick_summary();
arch/arm/mach-socfpga/spl_s10.c +7 -7
index c20e87cdbe..4044dc335e 100644
@@ -21,7 +21,7 @@
  #include <asm/arch/misc.h>
  #include <asm/arch/reset_manager.h>
  #include <asm/arch/system_manager.h>
-#include <watchdog.h>
+#include <wdt.h>
  #include <dm/uclass.h>
 
  DECLARE_GLOBAL_DATA_PTR;
@@ -41,12 +41,12 @@ void board_init_f(ulong dummy)
  	writel(SYSMGR_WDDBG_PAUSE_ALL_CPU,
  	       socfpga_get_sysmgr_addr() + SYSMGR_SOC64_WDDBG);
 
-#ifdef CONFIG_HW_WATCHDOG
-	/* Enable watchdog before initializing the HW */
-	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 1);
-	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 0);
-	hw_watchdog_init();
-#endif
+	/*
+	 * Enable watchdog as early as possible before initializing other
+	 * component.
+	 */
+	if (CONFIG_IS_ENABLED(WDT))
+		initr_watchdog();
 
  	/* ensure all processors are not released prior Linux boot */
  	writeq(0, CPU_RELEASE_ADDR);
drivers/watchdog/Kconfig +0 -0
index 50e6a1efba..a6c242ac9d 100644

drivers/watchdog/Kconfig config WATCHDOG_TIMEOUT_MSECS · line 33

Quoted 8 lines
drivers/watchdog/Kconfig +1 -1
@@ -27,7 +27,7 @@ config WATCHDOG_TIMEOUT_MSECS
  	int "Watchdog timeout in msec"
  	default 128000 if ARCH_MX31 || ARCH_MX5 || ARCH_MX6
  	default 128000 if ARCH_MX7 || ARCH_VF610
-	default 30000 if ARCH_SOCFPGA
+	default 10000 if ARCH_SOCFPGA
  	default 16000 if ARCH_SUNXI
  	default 60000
  	help

Viele Grüße,
Stefan Roese

Signature · 3 lines
DENX Software Engineering GmbH,      Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: [email protected]
#3 lore raw

-----Original Message-----
From: Stefan Roese <[email protected]>
Sent: Monday, 5 December, 2022 8:28 PM
To: Lim, Jit Loon <[email protected]>; [email protected]
Cc: Jagan Teki <[email protected]>; Vignesh R <[email protected]>; Vasut, Marek <[email protected]>; Simon <[email protected]>; Chee, Tien Fong <[email protected]>; Hea, Kok Kiang <[email protected]>; Lim, Elly Siew Chin <[email protected]>; Kho, Sin Hui <[email protected]>; Lokanathan, Raaj <[email protected]>; Maniyam, Dinesh <[email protected]>; Ng, Boon Khai <[email protected]>; Yuslaimi, Alif Zakuan <[email protected]>; Chong, Teik Heng <[email protected]>; Zamri, Muhammad Hazim Izzat <[email protected]>; Tang, Sieu Mun <[email protected]>
Subject: Re: [PATCH 1/2] drivers: watchdog: Enhance watchdog support in SPL for Stratix 10 and Agilex

Quoted 5 lines · Jit Loon Lim

From: Siew Chin Lim <[email protected]>

Change watchdog default timeout to 10 seconds and enable watchdog before initializing other component (example: DDR). Thus, watchdog need to be fully executed in onchip ram.

Please find some comments below.

Quoted 22 lines
---
  arch/arm/mach-socfpga/spl_agilex.c | 17 +++++++++--------
  arch/arm/mach-socfpga/spl_s10.c    | 14 +++++++-------
  drivers/watchdog/Kconfig           |  2 +-
  3 files changed, 17 insertions(+), 16 deletions(-)
arch/arm/mach-socfpga/spl_agilex.c +1 -0
index ee5a9dc1e2..c279f97cea 100644
@@ -20,7 +20,7 @@
  #include <asm/arch/misc.h>
  #include <asm/arch/reset_manager.h>
  #include <asm/arch/system_manager.h> -#include <watchdog.h>
+#include <wdt.h>
  #include <dm/uclass.h>
 
  DECLARE_GLOBAL_DATA_PTR;

arch/arm/mach-socfpga/spl_agilex.c void board_init_f(ulong dummy) · line 49

Quoted 10 lines
arch/arm/mach-socfpga/spl_agilex.c +0 -7
@@ -40,13 +40,6 @@ void board_init_f(ulong dummy)
  	writel(SYSMGR_WDDBG_PAUSE_ALL_CPU,
  	       socfpga_get_sysmgr_addr() + SYSMGR_SOC64_WDDBG);
 
-#ifdef CONFIG_HW_WATCHDOG
-	/* Enable watchdog before initializing the HW */
-	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 1);
-	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 0);
-	hw_watchdog_init();
-#endif
-

The patch also removes the CONFIG_HW_WATCHDOG stuff, which is probably unused right now. Could you please also mention this in the commit message?

Sure.

Quoted 5 lines
arch/arm/mach-socfpga/spl_agilex.c +0 -0
  	/* ensure all processors are not released prior Linux boot */
  	writeq(0, CPU_RELEASE_ADDR);
 
@@ -60,6 +53,14 @@ void board_init_f(ulong dummy)
  		hang();

arch/arm/mach-socfpga/spl_agilex.c void board_init_f(ulong dummy) · line 63

Quoted 10 lines
arch/arm/mach-socfpga/spl_agilex.c +8 -0
  	}
 
+	/*
+	 * Enable watchdog as early as possible before initializing other
+	 * component. Watchdog need to be enabled after clock driver because
+	 * it will retrieve the clock frequency from clock driver.
+	 */
+	if (CONFIG_IS_ENABLED(WDT))
+		initr_watchdog();
+

initr_watchdog() will get called from spl/common/spl/spl.c:
board_init_r(). Is this too late? How much time passes between these two code path's?

We do not have the actual measurement now and shall update once we get it measured.

Thanks,
Stefan

Quoted 39 lines
arch/arm/mach-socfpga/spl_agilex.c +0 -0
  	preloader_console_init();
  	print_reset_info();
  	cm_print_clock_quick_summary();
(quoted diff) +0 -0

b/arch/arm/mach-socfpga/spl_s10.c index c20e87cdbe..4044dc335e 100644

arch/arm/mach-socfpga/spl_s10.c +7 -6
@@ -21,7 +21,7 @@
  #include <asm/arch/misc.h>
  #include <asm/arch/reset_manager.h>
  #include <asm/arch/system_manager.h> -#include <watchdog.h>
+#include <wdt.h>
  #include <dm/uclass.h>
 
  DECLARE_GLOBAL_DATA_PTR;
@@ -41,12 +41,12 @@ void board_init_f(ulong dummy)
  	writel(SYSMGR_WDDBG_PAUSE_ALL_CPU,
  	       socfpga_get_sysmgr_addr() + SYSMGR_SOC64_WDDBG);
 
-#ifdef CONFIG_HW_WATCHDOG
-	/* Enable watchdog before initializing the HW */
-	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 1);
-	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 0);
-	hw_watchdog_init();
-#endif
+	/*
+	 * Enable watchdog as early as possible before initializing other
+	 * component.
+	 */
+	if (CONFIG_IS_ENABLED(WDT))
+		initr_watchdog();
 
  	/* ensure all processors are not released prior Linux boot */
  	writeq(0, CPU_RELEASE_ADDR);
drivers/watchdog/Kconfig index renamed from drivers/watchdog/Kconfig +0 -0

50e6a1efba..a6c242ac9d 100644

drivers/watchdog/Kconfig config WATCHDOG_TIMEOUT_MSECS · line 33

Quoted 8 lines
drivers/watchdog/Kconfig +1 -1
@@ -27,7 +27,7 @@ config WATCHDOG_TIMEOUT_MSECS
  	int "Watchdog timeout in msec"
  	default 128000 if ARCH_MX31 || ARCH_MX5 || ARCH_MX6
  	default 128000 if ARCH_MX7 || ARCH_VF610
-	default 30000 if ARCH_SOCFPGA
+	default 10000 if ARCH_SOCFPGA
  	default 16000 if ARCH_SUNXI
  	default 60000
  	help

Viele Grüße,
Stefan Roese

Signature · 3 lines
DENX Software Engineering GmbH,      Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: [email protected]
#4 lore raw

Hi Lim, Jit Loon,

Quoted 72 lines · Jit Loon

-----Original Message-----
From: Stefan Roese <[email protected]>
Sent: Monday, 5 December, 2022 8:28 PM
To: Lim, Jit Loon <[email protected]>; [email protected]
Cc: Jagan Teki <[email protected]>; Vignesh R <[email protected]>; Vasut, Marek <[email protected]>; Simon <[email protected]>; Chee, Tien Fong <[email protected]>; Hea, Kok Kiang <[email protected]>; Lim, Elly Siew Chin <[email protected]>; Kho, Sin Hui <[email protected]>; Lokanathan, Raaj <[email protected]>; Maniyam, Dinesh <[email protected]>; Ng, Boon Khai <[email protected]>; Yuslaimi, Alif Zakuan <[email protected]>; Chong, Teik Heng <[email protected]>; Zamri, Muhammad Hazim Izzat <[email protected]>; Tang, Sieu Mun <[email protected]>
Subject: Re: [PATCH 1/2] drivers: watchdog: Enhance watchdog support in SPL for Stratix 10 and Agilex

Quoted 5 lines · Jit Loon Lim

From: Siew Chin Lim <[email protected]>

Change watchdog default timeout to 10 seconds and enable watchdog before initializing other component (example: DDR). Thus, watchdog need to be fully executed in onchip ram.

Please find some comments below.

Quoted 22 lines
---
   arch/arm/mach-socfpga/spl_agilex.c | 17 +++++++++--------
   arch/arm/mach-socfpga/spl_s10.c    | 14 +++++++-------
   drivers/watchdog/Kconfig           |  2 +-
   3 files changed, 17 insertions(+), 16 deletions(-)
arch/arm/mach-socfpga/spl_agilex.c +1 -0
index ee5a9dc1e2..c279f97cea 100644
@@ -20,7 +20,7 @@
   #include <asm/arch/misc.h>
   #include <asm/arch/reset_manager.h>
   #include <asm/arch/system_manager.h> -#include <watchdog.h>
+#include <wdt.h>
   #include <dm/uclass.h>
 
   DECLARE_GLOBAL_DATA_PTR;

arch/arm/mach-socfpga/spl_agilex.c void board_init_f(ulong dummy) · line 49

Quoted 10 lines
arch/arm/mach-socfpga/spl_agilex.c +0 -7
@@ -40,13 +40,6 @@ void board_init_f(ulong dummy)
   	writel(SYSMGR_WDDBG_PAUSE_ALL_CPU,
   	       socfpga_get_sysmgr_addr() + SYSMGR_SOC64_WDDBG);
 
-#ifdef CONFIG_HW_WATCHDOG
-	/* Enable watchdog before initializing the HW */
-	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 1);
-	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 0);
-	hw_watchdog_init();
-#endif
-

The patch also removes the CONFIG_HW_WATCHDOG stuff, which is probably unused right now. Could you please also mention this in the commit message?

Sure.

Quoted 5 lines
arch/arm/mach-socfpga/spl_agilex.c +0 -0
   	/* ensure all processors are not released prior Linux boot */
   	writeq(0, CPU_RELEASE_ADDR);
 
@@ -60,6 +53,14 @@ void board_init_f(ulong dummy)
   		hang();

arch/arm/mach-socfpga/spl_agilex.c void board_init_f(ulong dummy) · line 63

Quoted 10 lines
arch/arm/mach-socfpga/spl_agilex.c +8 -0
   	}
 
+	/*
+	 * Enable watchdog as early as possible before initializing other
+	 * component. Watchdog need to be enabled after clock driver because
+	 * it will retrieve the clock frequency from clock driver.
+	 */
+	if (CONFIG_IS_ENABLED(WDT))
+		initr_watchdog();
+

initr_watchdog() will get called from spl/common/spl/spl.c:
board_init_r(). Is this too late? How much time passes between these two code path's?

Quoted 1 line

We do not have the actual measurement now and shall update once we get it measured.

Do you have some updates on this by now?

Thanks,
Stefan

Quoted 45 lines

Thanks,
Stefan

Quoted 42 lines
arch/arm/mach-socfpga/spl_agilex.c +0 -0
   	preloader_console_init();
   	print_reset_info();
   	cm_print_clock_quick_summary();
(quoted diff) +0 -0

b/arch/arm/mach-socfpga/spl_s10.c index c20e87cdbe..4044dc335e 100644

arch/arm/mach-socfpga/spl_s10.c +7 -6
@@ -21,7 +21,7 @@
   #include <asm/arch/misc.h>
   #include <asm/arch/reset_manager.h>
   #include <asm/arch/system_manager.h> -#include <watchdog.h>
+#include <wdt.h>
   #include <dm/uclass.h>
 
   DECLARE_GLOBAL_DATA_PTR;
@@ -41,12 +41,12 @@ void board_init_f(ulong dummy)
   	writel(SYSMGR_WDDBG_PAUSE_ALL_CPU,
   	       socfpga_get_sysmgr_addr() + SYSMGR_SOC64_WDDBG);
 
-#ifdef CONFIG_HW_WATCHDOG
-	/* Enable watchdog before initializing the HW */
-	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 1);
-	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 0);
-	hw_watchdog_init();
-#endif
+	/*
+	 * Enable watchdog as early as possible before initializing other
+	 * component.
+	 */
+	if (CONFIG_IS_ENABLED(WDT))
+		initr_watchdog();
 
   	/* ensure all processors are not released prior Linux boot */
   	writeq(0, CPU_RELEASE_ADDR);
drivers/watchdog/Kconfig index renamed from drivers/watchdog/Kconfig +0 -0

50e6a1efba..a6c242ac9d 100644

drivers/watchdog/Kconfig +0 -0
@@ -27,7 +27,7 @@ config WATCHDOG_TIMEOUT_MSECS
   	int "Watchdog timeout in msec"
   	default 128000 if ARCH_MX31 || ARCH_MX5 || ARCH_MX6
   	default 128000 if ARCH_MX7 || ARCH_VF610
Quoted 9 lines

drivers/watchdog/Kconfig config WATCHDOG_TIMEOUT_MSECS · line 33

Quoted 5 lines
drivers/watchdog/Kconfig +1 -1
-	default 30000 if ARCH_SOCFPGA
+	default 10000 if ARCH_SOCFPGA
   	default 16000 if ARCH_SUNXI
   	default 60000
   	help

Viele Grüße,
Stefan Roese

Viele Grüße,
Stefan Roese

Signature · 3 lines
DENX Software Engineering GmbH,      Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: [email protected]