Skip to contentSkip to conversation

arm: socfpga: n5x: Replace with soc64 env settings

PATCH New Jit Loon Lim 1 participant 1 message Nov 22, 2022

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm: socfpga: n5x: Replace with soc64 env settings

From: Tien Fong Chee <[email protected]>

Only DDR and clock changes in N5X compare with existing SOC64 devices, so a common SOC64 env setting can be used in N5X.

---
 include/configs/socfpga_n5x_socdk.h | 33 -----------------------------
 1 file changed, 33 deletions(-)
include/configs/socfpga_n5x_socdk.h +0 -33
index c295e91e3d..4929705259 100644
@@ -9,37 +9,4 @@
 
 #include <configs/socfpga_soc64_common.h>
 
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
-	"bootfile=" CONFIG_BOOTFILE "\0" \
-	"fdt_addr=1100000\0" \
-	"fdtimage=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
-	"mmcroot=/dev/mmcblk0p2\0" \
-	"mmcboot=setenv bootargs " CONFIG_BOOTARGS \
-		" root=${mmcroot} rw rootwait;" \
-		"booti ${loadaddr} - ${fdt_addr}\0" \
-	"mmcload=mmc rescan;" \
-		"load mmc 0:1 ${loadaddr} ${bootfile};" \
-		"load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
-	"mmcfitboot=setenv bootargs " CONFIG_BOOTARGS \
-		" root=${mmcroot} rw rootwait;" \
-		"bootm ${loadaddr}\0" \
-	"mmcfitload=mmc rescan;" \
-		"load mmc 0:1 ${loadaddr} ${bootfile}\0" \
-	"ramboot=setenv bootargs " CONFIG_BOOTARGS";" \
-		"booti ${loadaddr} - ${fdt_addr}\0" \
-	"linux_qspi_enable=if sf probe; then " \
-		"echo Enabling QSPI at Linux DTB...;" \
-		"fdt addr ${fdt_addr}; fdt resize;" \
-		"fdt set /soc/spi@ff8d2000 status okay;" \
-		"if fdt set /soc/clocks/qspi-clk clock-frequency" \
-		" ${qspi_clock}; then" \
-		" else fdt set /soc/clkmgr/clocks/qspi_clk clock-frequency" \
-		" ${qspi_clock}; fi; fi\0" \
-	"scriptaddr=0x02100000\0" \
-	"scriptfile=u-boot.scr\0" \
-	"fatscript=if fatload mmc 0:1 ${scriptaddr} ${scriptfile};" \
-		   "then source ${scriptaddr}; fi\0"
-
 #endif	/* __CONFIG_SOCFGPA_N5X_H__ */
Signature · 1 line
2.26.2