phy: ti: phy-j721e-wiz: add j721s2 support
Subsystems (2)
v2 cover phy: ti: phy-j721e-wiz: add j721s2 support
Add support for j721s2 support for phy-j721e-wiz module.
Changes from v1:
* Re-order new compatible within yaml documentation
Matt Ranostay (2):
dt-bindings: phy-j721e-wiz: add j721s2 compatible string
phy: ti: phy-j721e-wiz: add j721s2-wiz-10g module support
.../bindings/phy/ti,phy-j721e-wiz.yaml | 1 + drivers/phy/ti/phy-j721e-wiz.c | 16 ++++++++++++++++ 2 files changed, 17 insertions(+)
Signature · 1 line
2.38.GIT
PATCH v2 1/2 dt-bindings: phy-j721e-wiz: add j721s2 compatible string
Add ti,j721s2-wiz-10g compatible string to binding documentation.
--- Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml +1 -0
@@ -15,6 +15,7 @@ properties: enum: - ti,j721e-wiz-16g - ti,j721e-wiz-10g + - ti,j721s2-wiz-10g - ti,am64-wiz-10g - ti,j7200-wiz-10g - ti,j784s4-wiz-10g
Signature · 1 line
2.38.GIT
Re: [PATCH v2 1/2] dt-bindings: phy-j721e-wiz: add j721s2 compatible string
Quoted 5 lines · Matt Ranostay
Add ti,j721s2-wiz-10g compatible string to binding documentation.
Signed-off-by Matt Ranostay <[email protected]>---
Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yam
Best regards,
Krzysztof
Signature · 3 lines
linux-phy mailing list [email protected] https://lists.infradead.org/mailman/listinfo/linux-phy
PATCH v2 2/2 phy: ti: phy-j721e-wiz: add j721s2-wiz-10g module support
In reply to Matt RanostayAdd support for j721s2-wiz-10g device which is similar to j721e-wiz-10g but uses clock-names interface versus explicitly defining clock nodes within device tree node.
--- drivers/phy/ti/phy-j721e-wiz.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
drivers/phy/ti/phy-j721e-wiz.c +16 -0
@@ -322,6 +322,7 @@ enum wiz_type {AM64_WIZ_10G ,J7200_WIZ_10G ,/* J7200 SR2.0 */ J784S4_WIZ_10G , + J721S2_WIZ_10G, }; struct wiz_data {
@@ -1000,6 +1001,7 @@ static void wiz_clock_cleanup(struct wiz *wiz, struct device_node *node)case AM64_WIZ_10G :case J7200_WIZ_10G :case J784S4_WIZ_10G : +case J721S2_WIZ_10G :of_clk_del_provider (dev->of_node);return ;default :
@@ -1132,6 +1134,7 @@ static int wiz_clock_init(struct wiz *wiz, struct device_node *node)case AM64_WIZ_10G :case J7200_WIZ_10G :case J784S4_WIZ_10G : +case J721S2_WIZ_10G : ret =wiz_clock_register (wiz);if (ret)dev_err (dev,"Failed to register wiz clocks\n" );
@@ -1214,6 +1217,7 @@ static int wiz_phy_fullrt_div(struct wiz *wiz, int lane)break ;case J721E_WIZ_10G :case J7200_WIZ_10G : +case J721S2_WIZ_10G :if (wiz->lane_phy_type[lane] ==PHY_TYPE_SGMII )return regmap_field_write (wiz->p0_fullrt_div[lane],0x2 );break ;
@@ -1318,6 +1322,15 @@ static struct wiz_data j784s4_10g_data = { .clk_div_sel_num = WIZ_DIV_NUM_CLOCKS_10G, }; +static struct wiz_data j721s2_10g_data = { + .type =J721S2_WIZ_10G , + .pll0_refclk_mux_sel = &pll0_refclk_mux_sel, + .pll1_refclk_mux_sel = &pll1_refclk_mux_sel, + .refclk_dig_sel = &refclk_dig_sel_10g, + .clk_mux_sel = clk_mux_sel_10g, + .clk_div_sel_num =WIZ_DIV_NUM_CLOCKS_10G , +}; +static const struct of_device_id wiz_id_table[] = { { .compatible ="ti,j721e-wiz-16g" , .data = &j721e_16g_data,
@@ -1334,6 +1347,9 @@ static const struct of_device_id wiz_id_table[] = { { .compatible = "ti,j784s4-wiz-10g", .data = &j784s4_10g_data, }, + { + .compatible = "ti,j721s2-wiz-10g", .data = &j721s2_10g_data, + }, {} };MODULE_DEVICE_TABLE (of, wiz_id_table);
Signature · 1 line
2.38.GIT
Re: [PATCH v2 2/2] phy: ti: phy-j721e-wiz: add j721s2-wiz-10g module support
Quoted 6 lines · Matt Ranostay
Add support for j721s2-wiz-10g device which is similar to j721e-wiz-10g but uses clock-names interface versus explicitly defining clock nodes within device tree node.
Signed-off-by Matt Ranostay <[email protected]>---
Quoted 56 lines
drivers/phy/ti/phy-j721e-wiz.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)drivers/phy/ti/phy-j721e-wiz.c +13
-0@@ -322,6 +322,7 @@ enum wiz_type {AM64_WIZ_10G ,J7200_WIZ_10G ,/* J7200 SR2.0 */ J784S4_WIZ_10G , + J721S2_WIZ_10G, }; struct wiz_data {@@ -1000,6 +1001,7 @@ static void wiz_clock_cleanup(struct wiz *wiz, struct device_node *node)case AM64_WIZ_10G :case J7200_WIZ_10G :case J784S4_WIZ_10G : +case J721S2_WIZ_10G :of_clk_del_provider (dev->of_node);return ;default :@@ -1132,6 +1134,7 @@ static int wiz_clock_init(struct wiz *wiz, struct device_node *node)case AM64_WIZ_10G :case J7200_WIZ_10G :case J784S4_WIZ_10G : +case J721S2_WIZ_10G : ret =wiz_clock_register (wiz);if (ret)dev_err (dev,"Failed to register wiz clocks\n" );@@ -1214,6 +1217,7 @@ static int wiz_phy_fullrt_div(struct wiz *wiz, int lane)break ;case J721E_WIZ_10G :case J7200_WIZ_10G : +case J721S2_WIZ_10G :if (wiz->lane_phy_type[lane] ==PHY_TYPE_SGMII )return regmap_field_write (wiz->p0_fullrt_div[lane],0x2 );break ;@@ -1318,6 +1322,15 @@ static struct wiz_data j784s4_10g_data = { .clk_div_sel_num = WIZ_DIV_NUM_CLOCKS_10G, }; +static struct wiz_data j721s2_10g_data = { + .type =J721S2_WIZ_10G , + .pll0_refclk_mux_sel = &pll0_refclk_mux_sel, + .pll1_refclk_mux_sel = &pll1_refclk_mux_sel, + .refclk_dig_sel = &refclk_dig_sel_10g, + .clk_mux_sel = clk_mux_sel_10g, + .clk_div_sel_num =WIZ_DIV_NUM_CLOCKS_10G , +}; +static const struct of_device_id wiz_id_table[] = { { .compatible ="ti,j721e-wiz-16g" , .data = &j721e_16g_data,
drivers/phy/ti/phy-j721e-wiz.c static const struct of_device_id wiz_id_table[] = { · line 1355
Quoted 9 lines
drivers/phy/ti/phy-j721e-wiz.c +3
-0@@ -1334,6 +1347,9 @@ static const struct of_device_id wiz_id_table[] = { { .compatible = "ti,j784s4-wiz-10g", .data = &j784s4_10g_data, }, + { + .compatible = "ti,j721s2-wiz-10g", .data = &j721s2_10g_data, + }, {} };MODULE_DEVICE_TABLE (of, wiz_id_table);
--
cheers,
-roger
Quoted 1 line · Matt Ranostay
Add support for j721s2 support for phy-j721e-wiz module.
Applied, thanks
Signature · 1 line
~Vinod