Skip to contentSkip to conversation

ARM: Add Rockchip RV1126 support

PATCH Applied Jagan Teki 4 participants 13 messages Nov 23, 2022 – Feb 13, 2023

Subsystems (4)

v8 of 9 Applied Latest is v9 →

lore
Share & tools
lore

Jagan Teki

author
#0 lore raw

v8 cover ARM: Add Rockchip RV1126 support

This patch series combined the next level dts patches for Rockchip RV1126 support.

Changes for v8:
- fix rv1126 dtsi
- remove uart aliases
- add adc node name
- add uart dma-names
- add timer0 node name
Changes for v7:
- fix dtbs_check
- new dt-bindings patches
- collect Rob Ack

Any inputs?
Jagan.

Jagan Teki (8):
dt-bindings: arm: rockchip: Add pmu compatible for rv1126
dt-bindings: timer: rk-timer: Add rktimer for rv1126
ARM: dts: rockchip: Add Rockchip RV1126 pinctrl
ARM: dts: rockchip: Add Rockchip RV1126 SoC
dt-bindings: vendor-prefixes: Add Edgeble AI Technologies Pvt. Ltd.
dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 2
ARM: dts: rockchip: rv1126: Add Edgeble Neural Compute Module 2(Neu2)
ARM: dts: rockchip: rv1126: Add Edgeble Neural Compute Module 2(Neu2) IO

 .../devicetree/bindings/arm/rockchip.yaml     |   6 +
 .../devicetree/bindings/arm/rockchip/pmu.yaml |   2 +
 .../bindings/timer/rockchip,rk-timer.yaml     |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 MAINTAINERS                                   |   2 +-
 arch/arm/boot/dts/Makefile                    |   1 +
 arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts  |  38 ++
 arch/arm/boot/dts/rv1126-edgeble-neu2.dtsi    | 338 ++++++++++++++
 arch/arm/boot/dts/rv1126-pinctrl.dtsi         | 211 +++++++++
 arch/arm/boot/dts/rv1126.dtsi                 | 438 ++++++++++++++++++
 10 files changed, 1038 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts
 create mode 100644 arch/arm/boot/dts/rv1126-edgeble-neu2.dtsi
 create mode 100644 arch/arm/boot/dts/rv1126-pinctrl.dtsi
 create mode 100644 arch/arm/boot/dts/rv1126.dtsi
Signature · 1 line
2.25.1
author
#1 lore raw

PATCH v8 1/8 dt-bindings: arm: rockchip: Add pmu compatible for rv1126

Add PMU compatible string for rockchip rv1126.

---
Changes for v8:
- add Krzysztof ack
Changes for v7:
- new patch

 Documentation/devicetree/bindings/arm/rockchip/pmu.yaml | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/arm/rockchip/pmu.yaml +2 -0
index 8c73bc7f4009..b79c81cd9f0e 100644
@@ -27,6 +27,7 @@ select:
           - rockchip,rk3399-pmu
           - rockchip,rk3568-pmu
           - rockchip,rk3588-pmu
+          - rockchip,rv1126-pmu
 
   required:
     - compatible
@@ -43,6 +44,7 @@ properties:
           - rockchip,rk3399-pmu
           - rockchip,rk3568-pmu
           - rockchip,rk3588-pmu
+          - rockchip,rv1126-pmu
       - const: syscon
       - const: simple-mfd
 
Signature · 1 line
2.25.1
author
#2 lore raw

PATCH v8 2/8 dt-bindings: timer: rk-timer: Add rktimer for rv1126

In reply to Jagan Teki

Add rockchip timer compatible string for rockchip rv1126.

---
Changes for v8:
- drop cc list

 Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml +1 -0
index dc3bc1e62fe9..a6221222e948 100644
@@ -17,6 +17,7 @@ properties:
       - items:
           - enum:
               - rockchip,rv1108-timer
+              - rockchip,rv1126-timer
               - rockchip,rk3036-timer
               - rockchip,rk3188-timer
               - rockchip,rk3228-timer
Signature · 1 line
2.25.1
author
#4 lore raw

Re: [PATCH v8 2/8] dt-bindings: timer: rk-timer: Add rktimer for rv1126

In reply to Jagan Teki
Quoted 5 lines · Jagan Teki

Add rockchip timer compatible string for rockchip rv1126.

---

Daniel or Can someone please pick this? Heiko is holding this series due to this patch.

Jagan.

#5 lore raw

Re: [PATCH v8 2/8] dt-bindings: timer: rk-timer: Add rktimer for rv1126

Quoted 9 lines · Jagan Teki
Quoted 5 lines · Jagan Teki

Add rockchip timer compatible string for rockchip rv1126.

---

Daniel or Can someone please pick this? Heiko is holding this series due to this patch.

Applied, with a trivial conflict fix

Thanks

Signature · 11 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog


_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip
merge bot Applied
#6 lore raw

[tip: timers/core] dt-bindings: timer: rk-timer: Add rktimer for rv1126

In reply to Jagan Teki
The following commit has been merged into the timers/core branch of tip:

The following commit has been merged into the timers/core branch of tip:

Commit-ID:     b3cbfb7927922e4586f890a70a22f13130247b4e
Gitweb:        https://git.kernel.org/tip/b3cbfb7927922e4586f890a70a22f13130247b4e
Author:        Jagan Teki <[email protected]>
AuthorDate:    Thu, 24 Nov 2022 00:01:18 +05:30
Committer:     Daniel Lezcano <[email protected]>
CommitterDate: Mon, 13 Feb 2023 13:10:16 +01:00

dt-bindings: timer: rk-timer: Add rktimer for rv1126

Add rockchip timer compatible string for rockchip rv1126.

---
 Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml +1 -0
index b61ed1a..65e5983 100644
@@ -17,6 +17,7 @@ properties:
       - items:
           - enum:
               - rockchip,rv1108-timer
+              - rockchip,rv1126-timer
               - rockchip,rk3036-timer
               - rockchip,rk3128-timer
               - rockchip,rk3188-timer
author
#7 lore raw

PATCH v8 3/8 ARM: dts: rockchip: Add Rockchip RV1126 pinctrl

In reply to Jagan Teki

Add pinctrl definitions for Rockchip RV1126.

From RK3568 on-wards pinctrl configurations are maintained in common conf file rockchip-pinconf.dtsi and it is available in arm64 path (arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi).

So, include the same conf file to RV1126 pinctrl from arm64 path.

---
Changes for v8:
- none
Changes for v7:
- remove Edegble in license text
Changes for v6:
- updated commit message
Changes for v5:
- none
Changes for v4:
- update i2c pins
- rebase on -next
Changes for v3:
- none
Changes for v2:
- spilt pinctrl as separate patch

 MAINTAINERS                           |   2 +-
 arch/arm/boot/dts/rv1126-pinctrl.dtsi | 211 ++++++++++++++++++++++++++
 2 files changed, 212 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/rv1126-pinctrl.dtsi
MAINTAINERS +1 -1
index 5f66378dcfb0..4fd0fa773209 100644
@@ -2750,7 +2750,7 @@ F:	Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
 F:	Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
 F:	Documentation/devicetree/bindings/spi/spi-rockchip.yaml
 F:	arch/arm/boot/dts/rk3*
-F:	arch/arm/boot/dts/rv1108*
+F:	arch/arm/boot/dts/rv11*
 F:	arch/arm/mach-rockchip/
 F:	drivers/*/*/*rockchip*
 F:	drivers/*/*rockchip*
arch/arm/boot/dts/rv1126-pinctrl.dtsi new file +211 -0

211 lines not on this page · raw message

Signature · 1 line
2.25.1
author
#8 lore raw

PATCH v8 4/8 ARM: dts: rockchip: Add Rockchip RV1126 SoC

In reply to Jagan Teki

RV1126 is a high-performance vision processor SoC for IPC/CVR, especially for AI related application.

It is based on quad-core ARM Cortex-A7 32-bit core which integrates NEON and FPU. There is a 32KB I-cache and 32KB D-cache for each core and 512KB unified L2 cache. It has build-in NPU supports INT8/INT16 hybrid operation and computing power is up to 2.0TOPs.

This patch add basic core dtsi support.

---
Changes for v8:
- fix rv1126 dtsi
- remove uart aliases
- add adc node name
- add uart dma-names
- add timer0 node name
Changes for v7:
- fix dtbs_check
- rearrange nodes
- remove Edegble in license text
Changes for v6:
- add psci node
Changes for v5:
- none
Changes for v4:
- update i2c0
- rebase on -next
Changes for v3:
- update cru and power file names
Changes for v2:
- split pinctrl in separate patch

 arch/arm/boot/dts/rv1126.dtsi | 438 ++++++++++++++++++++++++++++++++++
 1 file changed, 438 insertions(+)
 create mode 100644 arch/arm/boot/dts/rv1126.dtsi
arch/arm/boot/dts/rv1126.dtsi new file +438 -0
new file mode 100644
index 000000000000..1cb43147e90b
@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/clock/rockchip,rv1126-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rockchip,rv1126-power.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	compatible = "rockchip,rv1126";
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+		};
+
+		cpu1: cpu@f01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+		};
+
+		cpu2: cpu@f02 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf02>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+		};
+
+		cpu3: cpu@f03 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf03>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	grf: syscon@fe000000 {
+		compatible = "rockchip,rv1126-grf", "syscon", "simple-mfd";
+		reg = <0xfe000000 0x20000>;
+	};
+
+	pmugrf: syscon@fe020000 {
+		compatible = "rockchip,rv1126-pmugrf", "syscon", "simple-mfd";
+		reg = <0xfe020000 0x1000>;
+
+		pmu_io_domains: io-domains {
+			compatible = "rockchip,rv1126-pmu-io-voltage-domain";
+			status = "disabled";
+		};
+	};
+
+	qos_emmc: qos@fe860000 {
+		compatible = "rockchip,rv1126-qos", "syscon";
+		reg = <0xfe860000 0x20>;
+	};
+
+	qos_nandc: qos@fe860080 {
+		compatible = "rockchip,rv1126-qos", "syscon";
+		reg = <0xfe860080 0x20>;
+	};
+
+	qos_sfc: qos@fe860200 {
+		compatible = "rockchip,rv1126-qos", "syscon";
+		reg = <0xfe860200 0x20>;
+	};
+
+	qos_sdio: qos@fe86c000 {
+		compatible = "rockchip,rv1126-qos", "syscon";
+		reg = <0xfe86c000 0x20>;
+	};
+
+	gic: interrupt-controller@feff0000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0xfeff1000 0x1000>,
+		      <0xfeff2000 0x2000>,
+		      <0xfeff4000 0x2000>,
+		      <0xfeff6000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	pmu: power-management@ff3e0000 {
+		compatible = "rockchip,rv1126-pmu", "syscon", "simple-mfd";
+		reg = <0xff3e0000 0x1000>;
+
+		power: power-controller {
+			compatible = "rockchip,rv1126-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-domain@RV1126_PD_NVM {
+				reg = <RV1126_PD_NVM>;
+				clocks = <&cru HCLK_EMMC>,
+					 <&cru CLK_EMMC>,
+					 <&cru HCLK_NANDC>,
+					 <&cru CLK_NANDC>,
+					 <&cru HCLK_SFC>,
+					 <&cru HCLK_SFCXIP>,
+					 <&cru SCLK_SFC>;
+				pm_qos = <&qos_emmc>,
+					 <&qos_nandc>,
+					 <&qos_sfc>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RV1126_PD_SDIO {
+				reg = <RV1126_PD_SDIO>;
+				clocks = <&cru HCLK_SDIO>,
+					 <&cru CLK_SDIO>;
+				pm_qos = <&qos_sdio>;
+				#power-domain-cells = <0>;
+			};
+		};
+	};
+
+	i2c0: i2c@ff3f0000 {
+		compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c";
+		reg = <0xff3f0000 0x1000>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		rockchip,grf = <&pmugrf>;
+		clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	uart1: serial@ff410000 {
+		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+		reg = <0xff410000 0x100>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&pmucru SCLK_UART1>, <&pmucru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 7>, <&dmac 6>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1m0_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	pmucru: clock-controller@ff480000 {
+		compatible = "rockchip,rv1126-pmucru";
+		reg = <0xff480000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	cru: clock-controller@ff490000 {
+		compatible = "rockchip,rv1126-cru";
+		reg = <0xff490000 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	dmac: dma-controller@ff4e0000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0xff4e0000 0x4000>;
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		#dma-cells = <1>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC>;
+		clock-names = "apb_pclk";
+	};
+
+	uart0: serial@ff560000 {
+		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+		reg = <0xff560000 0x100>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 5>, <&dmac 4>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart2: serial@ff570000 {
+		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+		reg = <0xff570000 0x100>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 9>, <&dmac 8>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2m1_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart3: serial@ff580000 {
+		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+		reg = <0xff580000 0x100>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 11>, <&dmac 10>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart3m0_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart4: serial@ff590000 {
+		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+		reg = <0xff590000 0x100>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 13>, <&dmac 12>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart4m0_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart5: serial@ff5a0000 {
+		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+		reg = <0xff5a0000 0x100>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 15>, <&dmac 14>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart5m0_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	saradc: adc@ff5e0000 {
+		compatible = "rockchip,rv1126-saradc", "rockchip,rk3399-saradc";
+		reg = <0xff5e0000 0x100>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC_P>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	timer0: timer@ff660000 {
+		compatible = "rockchip,rv1126-timer", "rockchip,rk3288-timer";
+		reg = <0xff660000 0x20>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&cru CLK_TIMER0>;
+		clock-names = "pclk", "timer";
+	};
+
+	emmc: mmc@ffc50000 {
+		compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0xffc50000 0x4000>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_EMMC>, <&cru CLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <200000000>;
+		power-domains = <&power RV1126_PD_NVM>;
+		status = "disabled";
+	};
+
+	sdmmc: mmc@ffc60000 {
+		compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0xffc60000 0x4000>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC>, <&cru CLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <200000000>;
+		status = "disabled";
+	};
+
+	sdio: mmc@ffc70000 {
+		compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0xffc70000 0x4000>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDIO>, <&cru CLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <200000000>;
+		power-domains = <&power RV1126_PD_SDIO>;
+		status = "disabled";
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rv1126-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmugrf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio@ff460000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff460000 0x100>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@ff620000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff620000 0x100>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@ff630000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff630000 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@ff640000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff640000 0x100>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@ff650000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff650000 0x100>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
+
+#include "rv1126-pinctrl.dtsi"
Signature · 1 line
2.25.1
author
#9 lore raw

PATCH v8 5/8 dt-bindings: vendor-prefixes: Add Edgeble AI Technologies Pvt. Ltd.

In reply to Jagan Teki

Edgeble AI is an Artificial Intelligence company with a focus on deploying Neural Acceleration principles at the Edge.

Add vendor prefix for it.

---
Changes for v8, v7, v6:
- none

 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
index c601f5438b02..dfc071548e91 100644
@@ -370,6 +370,8 @@ patternProperties:
     description: EBV Elektronik
   "^eckelmann,.*":
     description: Eckelmann AG
+  "^edgeble,.*":
+    description: Edgeble AI Technologies Pvt. Ltd.
   "^edimax,.*":
     description: EDIMAX Technology Co., Ltd
   "^edt,.*":
Signature · 1 line
2.25.1
author
#10 lore raw

PATCH v8 6/8 dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 2

In reply to Jagan Teki

Neural Compute Module 2(Neu2) is a 96boards SoM-CB compute module based on Rockchip RV1126 from Edgeble AI.

Edgeble Neural Compute Module 2(Neu2) IO board is an industrial form factor evaluation board from Edgeble AI.

Neu2 needs to mount on top of this IO board in order to create complete Edgeble Neural Compute Module 2(Neu2) IO platform.

Add dt-bindings for it.

---
Changes for v8:
- none
Changes for v7:
- collect Rob Ack
Changes for v6:
- updated SOM and Carrier name

 Documentation/devicetree/bindings/arm/rockchip.yaml | 6 ++++++
 1 file changed, 6 insertions(+)
Documentation/devicetree/bindings/arm/rockchip.yaml +6 -0
index 244c42eaae8c..26fdd205a899 100644
@@ -85,6 +85,12 @@ properties:
           - const: chipspark,rayeager-px2
           - const: rockchip,rk3066a
 
+      - description: Edgeble Neural Compute Module 2(Neu2) SoM based boards
+        items:
+          - const: edgeble,neural-compute-module-2-io   # Edgeble Neural Compute Module 2 IO Board
+          - const: edgeble,neural-compute-module-2      # Edgeble Neural Compute Module 2 SoM
+          - const: rockchip,rv1126
+
       - description: Elgin RV1108 R1
         items:
           - const: elgin,rv1108-r1
Signature · 1 line
2.25.1
author
#11 lore raw

PATCH v8 7/8 ARM: dts: rockchip: rv1126: Add Edgeble Neural Compute Module 2(Neu2)

In reply to Jagan Teki

Neural Compute Module 2(Neu2) is a 96boards SoM-CB compute module based on Rockchip RV1126 from Edgeble AI.

General features:
- Rockchip RV1126
- 2/4GB LPDDR4
- 8/16/32GB eMMC
- 2x MIPI CSI2 FPC connector
- Fn-link 8223A-SR WiFi/BT

Industrial grade (-40 °C to +85 °C) version of the same class of module called Neu2k powered with Rockchip RV1126K.

Neu2 needs to mount on top of Edgeble IO boards for creating complete platform solutions.

Add support for it.

---
Changes for v8:
- none
Changes for v7:
- fix dtbs_check
Changes for v6:
- updated the SOM name

 arch/arm/boot/dts/rv1126-edgeble-neu2.dtsi | 338 +++++++++++++++++++++
 1 file changed, 338 insertions(+)
 create mode 100644 arch/arm/boot/dts/rv1126-edgeble-neu2.dtsi
arch/arm/boot/dts/rv1126-edgeble-neu2.dtsi new file +338 -0
new file mode 100644
index 000000000000..7db3f8bb581d
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/ {
+	compatible = "edgeble,neural-compute-module-2", "rockchip,rv1126";
+
+	aliases {
+		mmc0 = &emmc;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vccio_flash: regulator-vccio-flash {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&flash_vol_sel>;
+		regulator-name = "vccio_flash";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	sdio_pwrseq: pwrseq-sdio {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_rstnout>;
+	rockchip,default-sample-phase = <90>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vccio_flash>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5>;
+		vcc6-supply = <&vcc_buck5>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_npu_vepu: DCDC_REG1 {
+				regulator-name = "vdd_npu_vepu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5: DCDC_REG5 {
+				regulator-name = "vcc_buck5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2200000>;
+				};
+			};
+
+			vcc_0v8: LDO_REG1 {
+				regulator-name = "vcc_0v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG2 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd0v8_pmu: LDO_REG3 {
+				regulator-name = "vcc0v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <800000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_dovdd: LDO_REG5 {
+				regulator-name = "vcc_dovdd";
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_dvdd: LDO_REG6 {
+				regulator-name = "vcc_dvdd";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_avdd: LDO_REG7 {
+				regulator-name = "vcc_avdd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG8 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: LDO_REG9 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_5v0: SWITCH_REG1 {
+				regulator-name = "vcc_5v0";
+			};
+
+			vcc_3v3: SWITCH_REG2 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	bt {
+		bt_enable: bt-enable {
+			rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	flash {
+		flash_vol_sel: flash-vol-sel {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio0-supply = <&vcc1v8_pmu>;
+	pmuio1-supply = <&vcc3v3_sys>;
+	vccio1-supply = <&vccio_flash>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_1v8>;
+	vccio4-supply = <&vcc_dovdd>;
+	vccio5-supply = <&vcc_1v8>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_dovdd>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	max-frequency = <100000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>;
+	rockchip,default-sample-phase = <90>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,qca9377-bt";
+		clocks = <&rk809 1>;
+		enable-gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; /* BT_RST */
+		max-speed = <2000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_enable>;
+		vddxo-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
Signature · 1 line
2.25.1
author
#12 lore raw

PATCH v8 8/8 ARM: dts: rockchip: rv1126: Add Edgeble Neural Compute Module 2(Neu2) IO

In reply to Jagan Teki

Neural Compute Module 2(Neu2) IO board is an industrial form factor evaluation board from Edgeble AI.

General features:
- microSD slot
- MIPI DSI connector
- 2x USB Host
- 1x USB OTG
- Ethernet
- mini PCIe
- Onboard PoE
- RS485, RS232, CAN
- Micro Phone array
- Speaker
- RTC battery slot
- 40-pin expansion

Neu2 needs to mount on top of this IO board in order to create complete Edgeble Neural Compute Module 2(Neu2) IO platform.

Add support for it.

---
Changes for v8, v7:
- none
Changes for v6:
- update the carrier name.

 arch/arm/boot/dts/Makefile                   |  1 +
 arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts | 38 ++++++++++++++++++++
 2 files changed, 39 insertions(+)
 create mode 100644 arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts
arch/arm/boot/dts/Makefile +1 -0
index e48cfbc4e8e4..40cc34bd4945 100644
@@ -1122,6 +1122,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rv1108-elgin-r1.dtb \
 	rv1108-evb.dtb \
+	rv1126-edgeble-neu2-io.dtb \
 	rk3036-evb.dtb \
 	rk3036-kylin.dtb \
 	rk3066a-bqcurie2.dtb \
arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts new file +38 -0
new file mode 100644
index 000000000000..ae1cf344239b
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/dts-v1/;
+#include "rv1126.dtsi"
+#include "rv1126-edgeble-neu2.dtsi"
+
+/ {
+	model = "Edgeble Neu2 IO Board";
+	compatible = "edgeble,neural-compute-module-2-io",
+		     "edgeble,neural-compute-module-2", "rockchip,rv1126";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>;
+	rockchip,default-sample-phase = <90>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
Signature · 1 line
2.25.1