arm: dts: rockchip: fix node name for hym8563 rtc
Subsystems (6)
Sasha Levin
maintainerPATCH 1/12 arm: dts: rockchip: fix node name for hym8563 rtc
From: Sebastian Reichel <[email protected]>
[ Upstream commit 17b57beafccb4569accbfc8c11390744cf59c021 ]
Fix the node name for hym8563 in all arm rockchip devicetrees.
--- arch/arm/boot/dts/rk3036-evb.dts | 2 +- arch/arm/boot/dts/rk3288-evb-act8846.dts | 2 +- arch/arm/boot/dts/rk3288-firefly.dtsi | 2 +- arch/arm/boot/dts/rk3288-miqi.dts | 2 +- arch/arm/boot/dts/rk3288-rock2-square.dts | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-)
arch/arm/boot/dts/rk3036-evb.dts +1 -1
@@ -31,7 +31,7 @@ phy0: ethernet-phy@0 { &i2c1 { status = "okay"; - hym8563: hym8563@51 { + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>;
arch/arm/boot/dts/rk3288-evb-act8846.dts +1 -1
@@ -53,7 +53,7 @@ vdd_gpu: syr828@41 { vin-supply = <&vcc_sys>; }; - hym8563@51 { + rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>;
arch/arm/boot/dts/rk3288-firefly.dtsi +1 -1
@@ -233,7 +233,7 @@ vdd_gpu: syr828@41 { vin-supply = <&vcc_sys>; }; - hym8563: hym8563@51 { + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>;
arch/arm/boot/dts/rk3288-miqi.dts +1 -1
@@ -146,7 +146,7 @@ vdd_gpu: syr828@41 { vin-supply = <&vcc_sys>; }; - hym8563: hym8563@51 { + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>;
arch/arm/boot/dts/rk3288-rock2-square.dts +1 -1
@@ -166,7 +166,7 @@ &hdmi { }; &i2c0 { - hym8563: hym8563@51 { + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>;
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 2/12 ARM: dts: rockchip: fix ir-receiver node names
From: Johan Jonker <[email protected]>
[ Upstream commit dd847fe34cdf1e89afed1af24986359f13082bfb ]
Fix ir-receiver node names on Rockchip boards,
so that they match with regex: '^ir(-receiver)?(@[a-f0-9]+)?$'
--- arch/arm/boot/dts/rk3188-radxarock.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/rk3188-radxarock.dts +1 -1
@@ -67,7 +67,7 @@ spdif_out: spdif-out { #sound-dai-cells = <0>; }; - ir_recv: gpio-ir-receiver { + ir_recv: ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; pinctrl-names = "default";
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 3/12 ARM: 9251/1: perf: Fix stacktraces for tracepoint events in THUMB2 kernels
In reply to Sasha LevinFrom: Tomislav Novak <[email protected]>
[ Upstream commit 612695bccfdbd52004551308a55bae410e7cd22f ]
Store the frame address where arm_get_current_stackframe() looks for it (ARM_r7 instead of ARM_fp if CONFIG_THUMB2_KERNEL=y). Otherwise frame->fp gets set to 0, causing unwind_frame() to fail.
# bpftrace -e 't:sched:sched_switch { @[kstack] = count(); exit(); }'
Attaching 1 probe...
@[
__schedule+1059
]: 1A typical first unwind instruction is 0x97 (SP = R7), so after executing it SP ends up being 0 and -URC_FAILURE is returned.
unwind_frame(pc = ac9da7d7 lr = 00000000 sp = c69bdda0 fp = 00000000) unwind_find_idx(ac9da7d7)
unwind_exec_insn: insn = 00000097
unwind_exec_insn: fp = 00000000 sp = 00000000 lr = 00000000 pc = 00000000
With this patch:
# bpftrace -e 't:sched:sched_switch { @[kstack] = count(); exit(); }'
Attaching 1 probe...
@[
__schedule+1059
__schedule+1059
schedule+79
schedule_hrtimeout_range_clock+163
schedule_hrtimeout_range+17
ep_poll+471
SyS_epoll_wait+111
sys_epoll_pwait+231
__ret_fast_syscall+1
]: 1--- arch/arm/include/asm/perf_event.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/include/asm/perf_event.h +1 -1
@@ -21,7 +21,7 @@ extern unsigned long perf_misc_flags(struct pt_regs *regs);#define perf_arch_fetch_caller_regs (regs, __ip) { \ (regs)->ARM_pc = (__ip); \ - (regs)->ARM_fp = (unsigned long) __builtin_frame_address(0); \ + frame_pointer((regs)) = (unsigned long) __builtin_frame_address(0); \ (regs)->ARM_sp = current_stack_pointer; \ (regs)->ARM_cpsr = SVC_MODE; \ }
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 4/12 ARM: 9266/1: mm: fix no-MMU ZERO_PAGE() implementation
In reply to Sasha LevinFrom: Giulio Benetti <[email protected]>
[ Upstream commit 340a982825f76f1cff0daa605970fe47321b5ee7 ]
Actually in no-MMU SoCs(i.e. i.MXRT) ZERO_PAGE(vaddr) expands to
```
virt_to_page(0)
```
that in order expands to:
```
pfn_to_page(virt_to_pfn(0))
```
and then virt_to_pfn(0) to:
```
((((unsigned long)(0) - PAGE_OFFSET) >> PAGE_SHIFT) +
PHYS_PFN_OFFSET)
```where PAGE_OFFSET and PHYS_PFN_OFFSET are the DRAM offset(0x80000000) and PAGE_SHIFT is 12. This way we obtain 16MB(0x01000000) summed to the base of DRAM(0x80000000).
When ZERO_PAGE(0) is then used, for example in bio_add_page(), the page gets an address that is out of DRAM bounds.
So instead of using fake virtual page 0 let's allocate a dedicated zero_page during paging_init() and assign it to a global 'struct page * empty_zero_page' the same way mmu.c does and it's the same approach used in m68k with commit dc068f462179 as discussed here[0]. Then let's move ZERO_PAGE() definition to the top of pgtable.h to be in common between mmu.c and nommu.c.
[0]: https://lore.kernel.org/linux-m68k/[email protected]/T/#m1266ceb63ad140743174d6b3070364d3c9a5179b
--- arch/arm/include/asm/pgtable-nommu.h | 6 ------ arch/arm/include/asm/pgtable.h | 16 +++++++++------- arch/arm/mm/nommu.c | 19 +++++++++++++++++++ 3 files changed, 28 insertions(+), 13 deletions(-)
arch/arm/include/asm/pgtable-nommu.h +0 -6
@@ -54,12 +54,6 @@typedef pte_t *pte_addr_t ; -/* -* ZERO_PAGE is a global shared page that is always zero: used -* for zero-mapped memory areas etc.. -*/ -#define ZERO_PAGE (vaddr) (virt_to_page(0)) -/* * Mark the prot value as uncacheable and unbufferable. */
arch/arm/include/asm/pgtable.h +9 -7
@@ -13,6 +13,15 @@#include <linux/const.h> #include <asm/proc-fns.h> +#ifndef __ASSEMBLY__ +/* +* ZERO_PAGE is a global shared page that is always zero: used +* for zero-mapped memory areas etc.. +*/ +extern struct page *empty_zero_page; +#define ZERO_PAGE (vaddr) (empty_zero_page) +#endif +#ifndef CONFIG_MMU #include <asm-generic/4level-fixup.h>
@@ -166,13 +175,6 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,#define __S111 __PAGE_SHARED_EXEC#ifndef __ASSEMBLY__ -/* -* ZERO_PAGE is a global shared page that is always zero: used -* for zero-mapped memory areas etc.. -*/ -extern struct page *empty_zero_page; -#define ZERO_PAGE (vaddr) (empty_zero_page) -extern pgd_t swapper_pg_dir[PTRS_PER_PGD ];
arch/arm/mm/nommu.c +19 -0
@@ -25,6 +25,13 @@unsigned long vectors_base; +/* +* empty_zero_page is a special page that is used for +* zero-initialized data and COW. +*/ +struct page *empty_zero_page; +EXPORT_SYMBOL (empty_zero_page); +#ifdef CONFIG_ARM_MPU struct mpu_rgn_info mpu_rgn_info;#endif
@@ -147,9 +154,21 @@ void __init adjust_lowmem_bounds(void)*/ void __init paging_init (const struct machine_desc *mdesc) { +void *zero_page; +early_trap_init ((void *)vectors_base);mpu_setup (); + +/* allocate the zero page. */ + zero_page =memblock_alloc (PAGE_SIZE ,PAGE_SIZE ); +if (!zero_page) +panic ("%s: Failed to allocate %lu bytes align=0x%lx\n" , + __func__,PAGE_SIZE ,PAGE_SIZE ); +bootmem_init (); + + empty_zero_page =virt_to_page (zero_page); +flush_dcache_page (empty_zero_page); }/*
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 5/12 ARM: dts: rockchip: disable arm_global_timer on rk3066 and rk3188
In reply to Sasha LevinFrom: Johan Jonker <[email protected]>
[ Upstream commit da74858a475782a3f16470907814c8cc5950ad68 ]
The clock source and the sched_clock provided by the arm_global_timer on Rockchip rk3066a/rk3188 are quite unstable because their rates depend on the CPU frequency.
Recent changes to the arm_global_timer driver makes it impossible to use.
On the other side, the arm_global_timer has a higher rating than the ROCKCHIP_TIMER, it will be selected by default by the time framework while we want to use the stable Rockchip clock source.
Keep the arm_global_timer disabled in order to have the DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default.
--- arch/arm/boot/dts/rk3188.dtsi | 1 - arch/arm/boot/dts/rk3xxx.dtsi | 7 +++++++ 2 files changed, 7 insertions(+), 1 deletion(-)
arch/arm/boot/dts/rk3188.dtsi +0 -1
@@ -509,7 +509,6 @@ &emac { &global_timer { interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; - status = "disabled"; }; &local_timer {
arch/arm/boot/dts/rk3xxx.dtsi +7 -0
@@ -108,6 +108,13 @@ global_timer: global-timer@1013c200 { reg = <0x1013c200 0x20>; interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>; clocks = <&cru CORE_PERI>; + status = "disabled"; + /* The clock source and the sched_clock provided by the arm_global_timer + * on Rockchip rk3066a/rk3188 are quite unstable because their rates + * depend on the CPU frequency. + * Keep the arm_global_timer disabled in order to have the + * DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default. + */ }; local_timer: local-timer@1013c600 {
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 6/12 9p/fd: Use P9_HDRSZ for header size
In reply to Sasha LevinFrom: GUO Zihua <[email protected]>
[ Upstream commit 6854fadbeee10891ed74246bdc05031906b6c8cf ]
Cleanup hardcoded header sizes to use P9_HDRSZ instead of '7'
[Dominique: commit message adjusted to make sense after offset size adjustment got removed]
--- net/9p/trans_fd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
net/9p/trans_fd.c +3 -3
@@ -133,7 +133,7 @@ struct p9_conn {struct list_head unsent_req_list;struct p9_req_t *rreq;struct p9_req_t *wreq; -char tmp_buf[7 ]; +char tmp_buf[P9_HDRSZ ];struct p9_fcall rc;int wpos;int wsize;
@@ -304,7 +304,7 @@ static void p9_read_work(struct work_struct *work)if (!m->rc.sdata) { m->rc.sdata = m->tmp_buf; m->rc.offset =0 ; - m->rc.capacity =7 ;/* start by reading header */ + m->rc.capacity =P9_HDRSZ ;/* start by reading header */ }clear_bit (Rpending, &m->wsched);
@@ -327,7 +327,7 @@ static void p9_read_work(struct work_struct *work)p9_debug (P9_DEBUG_TRANS ,"got new header\n" );/* Header size */ - m->rc.size =7 ; + m->rc.size =P9_HDRSZ ; err =p9_parse_header (&m->rc, &m->rc.size,NULL ,NULL ,0 );if (err) { p9_debug(P9_DEBUG_ERROR,
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 7/12 ALSA: seq: Fix function prototype mismatch in snd_seq_expand_var_event
In reply to Sasha LevinFrom: Kees Cook <[email protected]>
[ Upstream commit 05530ef7cf7c7d700f6753f058999b1b5099a026 ]
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed.
seq_copy_in_user() and seq_copy_in_kernel() did not have prototypes matching snd_seq_dump_func_t. Adjust this and remove the casts. There are not resulting binary output differences.
This was found as a result of Clang's new -Wcast-function-type-strict flag, which is more sensitive than the simpler -Wcast-function-type, which only checks for type width mismatches.
--- sound/core/seq/seq_memory.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
sound/core/seq/seq_memory.c +7 -4
@@ -126,15 +126,19 @@ EXPORT_SYMBOL(snd_seq_dump_var_event);* expand the variable length event to linear buffer space. */ -static int seq_copy_in_kernel (char **bufptr,const void *src,int size) +static int seq_copy_in_kernel (void *ptr,void *src,int size) { +char **bufptr = ptr; +memcpy (*bufptr, src, size); *bufptr += size;return 0 ; } -static int seq_copy_in_user (char __user **bufptr,const void *src,int size) +static int seq_copy_in_user (void *ptr,void *src,int size) { +char __user **bufptr = ptr; +if (copy_to_user (*bufptr, src, size))return -EFAULT ; *bufptr += size;
@@ -163,8 +167,7 @@ int snd_seq_expand_var_event(const struct snd_seq_event *event, int count, charreturn newlen; } err =snd_seq_dump_var_event (event, - in_kernel ? (snd_seq_dump_func_t )seq_copy_in_kernel : - (snd_seq_dump_func_t )seq_copy_in_user, + in_kernel ? seq_copy_in_kernel : seq_copy_in_user, &buf);return err <0 ? err : newlen; }
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 8/12 ASoC: soc-pcm: Add NULL check in BE reparenting
In reply to Sasha LevinFrom: Srinivasa Rao Mandadapu <[email protected]>
[ Upstream commit db8f91d424fe0ea6db337aca8bc05908bbce1498 ]
Add NULL check in dpcm_be_reparent API, to handle kernel NULL pointer dereference error. The issue occurred in fuzzing test.
--- sound/soc/soc-pcm.c | 2 ++ 1 file changed, 2 insertions(+)
sound/soc/soc-pcm.c +2 -0
@@ -1266,6 +1266,8 @@ static void dpcm_be_reparent(struct snd_soc_pcm_runtime *fe,return ; be_substream =snd_soc_dpcm_get_substream (be, stream); +if (!be_substream) +return ;list_for_each_entry (dpcm, &be->dpcm[stream].fe_clients, list_fe) {if (dpcm->fe == fe)
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 9/12 regulator: twl6030: fix get status of twl6032 regulators
In reply to Sasha LevinFrom: Andreas Kemnade <[email protected]>
[ Upstream commit 31a6297b89aabc81b274c093a308a7f5b55081a7 ]
Status is reported as always off in the 6032 case. Status reporting now matches the logic in the setters. Once of the differences to the 6030 is that there are no groups, therefore the state needs to be read out in the lower bits.
--- drivers/regulator/twl6030-regulator.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
drivers/regulator/twl6030-regulator.c +11 -4
@@ -71,6 +71,7 @@ struct twlreg_info {#define TWL6030_CFG_STATE_SLEEP 0x03#define TWL6030_CFG_STATE_GRP_SHIFT 5#define TWL6030_CFG_STATE_APP_SHIFT 2 +#define TWL6030_CFG_STATE_MASK 0x03#define TWL6030_CFG_STATE_APP_MASK (0x03 << TWL6030_CFG_STATE_APP_SHIFT)#define TWL6030_CFG_STATE_APP (v) (((v) & TWL6030_CFG_STATE_APP_MASK) >>\ TWL6030_CFG_STATE_APP_SHIFT)
@@ -131,13 +132,14 @@ static int twl6030reg_is_enabled(struct regulator_dev *rdev)if (grp <0 )return grp; grp &=P1_GRP_6030 ; + val =twlreg_read (info,TWL_MODULE_PM_RECEIVER ,VREG_STATE ); + val =TWL6030_CFG_STATE_APP (val); }else { + val =twlreg_read (info,TWL_MODULE_PM_RECEIVER ,VREG_STATE ); + val &=TWL6030_CFG_STATE_MASK ; grp =1 ; } - val =twlreg_read (info,TWL_MODULE_PM_RECEIVER ,VREG_STATE ); - val =TWL6030_CFG_STATE_APP (val); -return grp && (val ==TWL6030_CFG_STATE_ON ); }
@@ -190,7 +192,12 @@ static int twl6030reg_get_status(struct regulator_dev *rdev) val =twlreg_read (info,TWL_MODULE_PM_RECEIVER ,VREG_STATE ); -switch (TWL6030_CFG_STATE_APP (val)) { +if (info->features &TWL6032_SUBCLASS ) + val &=TWL6030_CFG_STATE_MASK ; +else + val =TWL6030_CFG_STATE_APP (val); + +switch (val) {case TWL6030_CFG_STATE_ON :return REGULATOR_STATUS_NORMAL ;
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 10/12 fbcon: Use kzalloc() in fbcon_prepare_logo()
In reply to Sasha LevinFrom: Tetsuo Handa <[email protected]>
[ Upstream commit a6a00d7e8ffd78d1cdb7a43f1278f081038c638f ]
A kernel built with syzbot's config file reported that
scr_memcpyw(q, save, array3_size(logo_lines, new_cols, 2))
causes uninitialized "save" to be copied.
----------
[drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0 [drm] Initialized vkms 1.0.0 20180514 for vkms on minor 1
Console: switching to colour frame buffer device 128x48
=====================================================
BUG: KMSAN: uninit-value in do_update_region+0x4b8/0xba0 do_update_region+0x4b8/0xba0 update_region+0x40d/0x840 fbcon_switch+0x3364/0x35e0 redraw_screen+0xae3/0x18a0 do_bind_con_driver+0x1cb3/0x1df0 do_take_over_console+0x11cb/0x13f0 fbcon_fb_registered+0xacc/0xfd0 register_framebuffer+0x1179/0x1320 __drm_fb_helper_initial_config_and_unlock+0x23ad/0x2b40 drm_fbdev_client_hotplug+0xbea/0xda0 drm_fbdev_generic_setup+0x65e/0x9d0 vkms_init+0x9f3/0xc76 (...snipped...)
Uninit was stored to memory at:
fbcon_prepare_logo+0x143b/0x1940 fbcon_init+0x2c1b/0x31c0 visual_init+0x3e7/0x820 do_bind_con_driver+0x14a4/0x1df0 do_take_over_console+0x11cb/0x13f0 fbcon_fb_registered+0xacc/0xfd0 register_framebuffer+0x1179/0x1320 __drm_fb_helper_initial_config_and_unlock+0x23ad/0x2b40 drm_fbdev_client_hotplug+0xbea/0xda0 drm_fbdev_generic_setup+0x65e/0x9d0 vkms_init+0x9f3/0xc76 (...snipped...)
Uninit was created at:
__kmem_cache_alloc_node+0xb69/0x1020 __kmalloc+0x379/0x680 fbcon_prepare_logo+0x704/0x1940 fbcon_init+0x2c1b/0x31c0 visual_init+0x3e7/0x820 do_bind_con_driver+0x14a4/0x1df0 do_take_over_console+0x11cb/0x13f0 fbcon_fb_registered+0xacc/0xfd0 register_framebuffer+0x1179/0x1320 __drm_fb_helper_initial_config_and_unlock+0x23ad/0x2b40 drm_fbdev_client_hotplug+0xbea/0xda0 drm_fbdev_generic_setup+0x65e/0x9d0 vkms_init+0x9f3/0xc76 (...snipped...) CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc4-00356-g8f2975c2bb4c #924 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 ----------
--- drivers/video/fbdev/core/fbcon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/video/fbdev/core/fbcon.c +1 -1
@@ -579,7 +579,7 @@ static void fbcon_prepare_logo(struct vc_data *vc, struct fb_info *info,if (scr_readw (r) != vc->vc_video_erase_char)break ;if (r != q && new_rows >= rows + logo_lines) { - save =kmalloc (array3_size (logo_lines, new_cols,2 ), + save =kzalloc (array3_size (logo_lines, new_cols,2 ),GFP_KERNEL );if (save) {int i = cols < new_cols ? cols : new_cols;
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 11/12 9p/xen: check logical size for buffer size
In reply to Sasha LevinFrom: Dominique Martinet <[email protected]>
[ Upstream commit 391c18cf776eb4569ecda1f7794f360fe0a45a26 ]
trans_xen did not check the data fits into the buffer before copying from the xen ring, but we probably should.
Add a check that just skips the request and return an error to userspace if it did not fit
--- net/9p/trans_xen.c | 9 +++++++++ 1 file changed, 9 insertions(+)
net/9p/trans_xen.c +9 -0
@@ -230,6 +230,14 @@ static void p9_xen_response(struct work_struct *work)continue ; } +if (h.size > req->rc.capacity) { +dev_warn (&priv->dev->dev, +"requested packet size too big: %d for tag %d with capacity %zd\n" , + h.size, h.tag, req->rc.capacity); + req->status =REQ_STATUS_ERROR ; + goto recv_error; + } +memcpy (&req->rc, &h,sizeof (h)); req->rc.offset =0 ;
@@ -239,6 +247,7 @@ static void p9_xen_response(struct work_struct *work) masked_prod, &masked_cons, XEN_9PFS_RING_SIZE); +recv_error:virt_mb (); cons += h.size; ring->intf->in_cons = cons;
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 12/12 net: usb: qmi_wwan: add u-blox 0x1342 composition
In reply to Sasha LevinFrom: Davide Tronchin <[email protected]>
[ Upstream commit a487069e11b6527373f7c6f435d8998051d0b5d9 ]
Add RmNet support for LARA-L6.
LARA-L6 module can be configured (by AT interface) in three different USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial interface and 1 CDC-ECM virtual network interface
In RmNet mode LARA-L6 exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parset/alternative functions
If 4: RMNET interface
--- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/usb/qmi_wwan.c +1 -0
@@ -1376,6 +1376,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x0489, 0xe0b4, 0)}, /* Foxconn T77W968 LTE */ {QMI_FIXED_INTF(0x0489, 0xe0b5, 0)}, /* Foxconn T77W968 LTE with eSIM support*/ {QMI_FIXED_INTF(0x2692, 0x9025, 4)}, /* Cellient MPL200 (rebranded Qualcomm 05c6:9025) */ + {QMI_QUIRK_SET_DTR(0x1546, 0x1342, 4)}, /* u-blox LARA-L6 *//* 4. Gobi 1000 devices */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
Signature · 1 line
2.35.1