Implement something
Subsystems (2)
cover Implement something
Hello!
Evgeny Ermakov (2):
hw/char: Add STM32F7 peripheral: USART
hw/input: Add FT5336 touch controller
include/hw/char/stm32f7xx_usart.h | 30 +++ include/hw/input/ft5336.h | 14 ++ hw/char/stm32f7xx_usart.c | 361 ++++++++++++++++++++++++++++++ hw/input/ft5336.c | 357 +++++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/char/Kconfig | 3 + hw/char/meson.build | 1 + hw/char/trace-events | 4 + hw/input/Kconfig | 4 + hw/input/meson.build | 2 + 10 files changed, 777 insertions(+) create mode 100644 include/hw/char/stm32f7xx_usart.h create mode 100644 include/hw/input/ft5336.h create mode 100644 hw/char/stm32f7xx_usart.c create mode 100644 hw/input/ft5336.c
Signature · 1 line
2.38.1
PATCH 1/2 hw/char: Add STM32F7 peripheral: USART
Signed-off-by Evgeny Ermakov <[email protected]>
--- include/hw/char/stm32f7xx_usart.h | 30 +++ hw/char/stm32f7xx_usart.c | 361 ++++++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/char/Kconfig | 3 + hw/char/meson.build | 1 + hw/char/trace-events | 4 + 6 files changed, 400 insertions(+) create mode 100644 include/hw/char/stm32f7xx_usart.h create mode 100644 hw/char/stm32f7xx_usart.c
include/hw/char/stm32f7xx_usart.h new file +30 -0
@@ -0,0 +1,30 @@ +/* +* STM32F7XX Universal synchronous/asynchronous receiver transmitter (USART) +* +* Copyright (c) 2022 Evgeny Ermakov <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0-or-later +*/ + +#ifndef HW_CHAR_STM32F7XX_USART_H +#define HW_CHAR_STM32F7XX_USART_H + +#include "hw/arm/stm32f.h" +#include "chardev/char-fe.h" + +#define TYPE_STM32F7XX_USART "stm32f7xx-usart" +OBJECT_DECLARE_SIMPLE_TYPE(STM32F7XXUSARTState, STM32F7XX_USART) + +#define STM32F7XX_USART_R_MAX 11 + +struct STM32F7XXUSARTState { +/*< private >*/ +STM32FPeripheralState parent_obj; + +uint32_t regs[STM32F7XX_USART_R_MAX ]; + +CharBackend chr; +qemu_irq irq; +}; + +#endif /* HW_CHAR_STM32F7XX_USART_H */
hw/char/stm32f7xx_usart.c new file +361 -0
361 lines not on this page · raw message
hw/arm/Kconfig +1 -0
@@ -376,6 +376,7 @@ config STM32F405_SOC config STM32F7XX_SOC bool select STM32F + select STM32F7XX_USART config XLNX_ZYNQMP_ARM bool
hw/char/Kconfig +3 -0
@@ -41,6 +41,9 @@ config VIRTIO_SERIAL config STM32F2XX_USART bool +config STM32F7XX_USART + bool + config CMSDK_APB_UART bool
hw/char/meson.build +1 -0
@@ -31,6 +31,7 @@ softmmu_ss.add(when: 'CONFIG_RENESAS_SCI', if_true: files('renesas_sci.c')) softmmu_ss.add(when: 'CONFIG_SIFIVE_UART', if_true: files('sifive_uart.c')) softmmu_ss.add(when: 'CONFIG_SH_SCI', if_true: files('sh_serial.c')) softmmu_ss.add(when: 'CONFIG_STM32F2XX_USART', if_true: files('stm32f2xx_usart.c')) +softmmu_ss.add(when: 'CONFIG_STM32F7XX_USART', if_true: files('stm32f7xx_usart.c')) softmmu_ss.add(when: 'CONFIG_MCHP_PFSOC_MMUART', if_true: files('mchp_pfsoc_mmuart.c')) specific_ss.add(when: 'CONFIG_HTIF', if_true: files('riscv_htif.c'))
hw/char/trace-events +4 -0
@@ -105,3 +105,7 @@ cadence_uart_baudrate(unsigned baudrate) "baudrate %u" # sh_serial.c sh_serial_read(char *id, unsigned size, uint64_t offs, uint64_t val) " %s size %d offs 0x%02" PRIx64 " -> 0x%02" PRIx64 sh_serial_write(char *id, unsigned size, uint64_t offs, uint64_t val) "%s size %d offs 0x%02" PRIx64 " <- 0x%02" PRIx64 + +# stm32f7xx_usart.c +stm32f7xx_usart_read(uint64_t addr) " addr: 0x%02" PRIx64 +stm32f7xx_usart_write(uint64_t addr, uint64_t data) "addr: 0x%02" PRIx64 " val: 0x%" PRIx64
Signature · 1 line
2.38.1
PATCH 2/2 hw/input: Add FT5336 touch controller
In reply to Evgeny ErmakovSigned-off-by Evgeny Ermakov <[email protected]>
--- include/hw/input/ft5336.h | 14 ++ hw/input/ft5336.c | 357 ++++++++++++++++++++++++++++++++++++++ hw/input/Kconfig | 4 + hw/input/meson.build | 2 + 4 files changed, 377 insertions(+) create mode 100644 include/hw/input/ft5336.h create mode 100644 hw/input/ft5336.c
include/hw/input/ft5336.h new file +14 -0
@@ -0,0 +1,14 @@ +/* +* FT5336 touch controller +* +* Copyright (c) 2022 Evgeny Ermakov <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0-or-later +*/ + +#ifndef HW_INPUT_FT5336_H +#define HW_INPUT_FT5336_H + +#define TYPE_FT5336 "ft5336" + +#endif
hw/input/ft5336.c new file +357 -0
357 lines not on this page · raw message
hw/input/Kconfig +4 -0
@@ -46,3 +46,7 @@ config TSC210X config LASIPS2 select PS2 + +config FT5336 + bool + depends on I2C
hw/input/meson.build +2 -0
@@ -16,3 +16,5 @@ softmmu_ss.add(when: 'CONFIG_VHOST_USER_INPUT', if_true: files('vhost-user-input softmmu_ss.add(when: 'CONFIG_PXA2XX', if_true: files('pxa2xx_keypad.c')) softmmu_ss.add(when: 'CONFIG_TSC210X', if_true: files('tsc210x.c')) softmmu_ss.add(when: 'CONFIG_LASIPS2', if_true: files('lasips2.c')) + +softmmu_ss.add(when: 'CONFIG_FT5336', if_true: files('ft5336.c'))
Signature · 1 line
2.38.1
Evgeny Ermakov <[email protected]> writes:
Oops, sorry. Ignore this, I sent it by mistake.
Quoted 24 lines
Hello!
Evgeny Ermakov (2):
hw/char: Add STM32F7 peripheral: USART
hw/input: Add FT5336 touch controllerinclude/hw/char/stm32f7xx_usart.h | 30 +++ include/hw/input/ft5336.h | 14 ++ hw/char/stm32f7xx_usart.c | 361 ++++++++++++++++++++++++++++++ hw/input/ft5336.c | 357 +++++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/char/Kconfig | 3 + hw/char/meson.build | 1 + hw/char/trace-events | 4 + hw/input/Kconfig | 4 + hw/input/meson.build | 2 + 10 files changed, 777 insertions(+) create mode 100644 include/hw/char/stm32f7xx_usart.h create mode 100644 include/hw/input/ft5336.h create mode 100644 hw/char/stm32f7xx_usart.c create mode 100644 hw/input/ft5336.cSignature · 1 line
2.38.1