media: dvb-usb: m920x: make read-only arrays static const
Subsystems (2)
PATCH 1/1 media: dvb-usb: m920x: make read-only arrays static const
Don't populate the arrays on the stack, instead make them static const. Also makes the object code smaller.
Signed-off-by Colin Ian King <[email protected]>
--- drivers/media/usb/dvb-usb/m920x.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/media/usb/dvb-usb/m920x.c +8 -8
@@ -485,14 +485,14 @@ static int m920x_identify_state(struct usb_device *udev,static int m920x_mt352_demod_init (struct dvb_frontend *fe) {int ret; -u8 config[] = {CONFIG ,0x3d }; -u8 clock[] = {CLOCK_CTL ,0x30 }; -u8 reset[] = {RESET ,0x80 }; -u8 adc_ctl[] = {ADC_CTL_1 ,0x40 }; -u8 agc[] = {AGC_TARGET ,0x1c ,0x20 }; -u8 sec_agc[] = {0x69 ,0x00 ,0xff ,0xff ,0x40 ,0xff ,0x00 ,0x40 ,0x40 }; -u8 unk1[] = {0x93 ,0x1a }; -u8 unk2[] = {0xb5 ,0x7a }; +static const u8 config[] = {CONFIG ,0x3d }; +static const u8 clock[] = {CLOCK_CTL ,0x30 }; +static const u8 reset[] = {RESET ,0x80 }; +static const u8 adc_ctl[] = {ADC_CTL_1 ,0x40 }; +static const u8 agc[] = {AGC_TARGET ,0x1c ,0x20 }; +static const u8 sec_agc[] = {0x69 ,0x00 ,0xff ,0xff ,0x40 ,0xff ,0x00 ,0x40 ,0x40 }; +static const u8 unk1[] = {0x93 ,0x1a }; +static const u8 unk2[] = {0xb5 ,0x7a };deb ("Demod init!\n" );
Signature · 1 line
2.38.1