ASoC: Intel: Skylake: Topology and shutdown fixes
Subsystems (3)
Cezary Rojewski
maintainercover ASoC: Intel: Skylake: Topology and shutdown fixes
Even though skylake-driver is going to be replaced by the avs-driver, the goal is to keep it functional on all the configurations it supports until its EOL. When comparing chrome trees against upstream skylake-driver, couple fixes pop up that are not part of upstream repository. These fixes are backed up by real bugs (issue trackers), address real problems. There is no reason for them to stay in the internal tree.
Except for the last patch, all changes combined together address issue when the driver updates the presumably static audio format descriptions coming from the topology files through its "fixup" functions. As long as given audio format is used by a single path, nothing collides and any updates are harmless. However, when multiple paths e.g.: DMIC and HDMI1 utilize the same audio format descriptor, any updates caused by the opening of the first path, may cause the second to fail.
The last change from the set fixes driver hang sporadically occurring during shutdown procedure. Once HDAudio links are powered down along with the AudioDSP, the hang stops reproducing.
Cezary Rojewski (5):
ASoC: Intel: Skylake: Update pipe_config_idx before filling BE params
ASoC: Intel: Skylake: Remove skl_tplg_is_multi_fmt()
ASoC: Intel: Skylake: Drop pipe_config_idx
ASoC: Intel: Skylake: Introduce single place for pipe-config selection
ASoC: Intel: Skylake: Fix driver hang during shutdown
sound/soc/intel/skylake/skl-topology.c | 73 +++++++++----------------- sound/soc/intel/skylake/skl-topology.h | 1 - sound/soc/intel/skylake/skl.c | 5 +- 3 files changed, 28 insertions(+), 51 deletions(-)
Signature · 1 line
2.25.1
Cezary Rojewski
maintainerPATCH 1/5 ASoC: Intel: Skylake: Update pipe_config_idx before filling BE params
Without updating the index before BE copier config is filled with hardware parameters, outdated parameters are used instead.
--- sound/soc/intel/skylake/skl-topology.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
sound/soc/intel/skylake/skl-topology.c +14 -1
@@ -1837,16 +1837,24 @@ static int skl_tplg_be_fill_pipe_params(struct snd_soc_dai *dai, {struct nhlt_specific_cfg *cfg;struct skl_pipe *pipe = mconfig->pipe; +struct skl_pipe_params save = *pipe->p_params;struct skl_pipe_fmt *pipe_fmt;struct skl_dev *skl =get_skl_ctx (dai->dev);int link_type =skl_tplg_be_link_type (mconfig->dev_type);u8 dev_type =skl_tplg_be_dev_type (mconfig->dev_type); +int ret;skl_tplg_fill_dma_id (mconfig, params);if (link_type ==NHLT_LINK_HDA )return 0 ; + *pipe->p_params = *params; + ret =skl_tplg_get_pipe_config (skl, mconfig); +if (ret) + goto err; + +dev_dbg (skl->dev,"%s using pipe config: %d\n" , __func__, pipe->pipe_config_idx);if (pipe->direction ==SNDRV_PCM_STREAM_PLAYBACK ) pipe_fmt = &pipe->configs[pipe->pipe_config_idx].out_fmt;else
@@ -1865,10 +1873,15 @@ static int skl_tplg_be_fill_pipe_params(struct snd_soc_dai *dai,dev_err (dai->dev,"Blob NULL for id:%d type:%d dirn:%d ch:%d, freq:%d, fmt:%d\n" , mconfig->vbus_id, link_type, params->stream, params->ch, params->s_freq, params->s_fmt); -return -EINVAL ; + ret = -EINVAL ; + goto err; }return 0 ; + +err: + *pipe->p_params = save; +return ret; } static int skl_tplg_be_set_src_pipe_params(struct snd_soc_dai *dai,
Signature · 1 line
2.25.1
Cezary Rojewski
maintainerPATCH 2/5 ASoC: Intel: Skylake: Remove skl_tplg_is_multi_fmt()
In reply to Cezary RojewskiRather than forcing userspace to select proper format with enumerable kcontrols, select it ourselves based on provided hw_params.
--- sound/soc/intel/skylake/skl-topology.c | 40 -------------------------- 1 file changed, 40 deletions(-)
sound/soc/intel/skylake/skl-topology.c +0 -40
@@ -582,38 +582,6 @@ static int skl_tplg_unload_pipe_modules(struct skl_dev *skl,return ret; } -static bool skl_tplg_is_multi_fmt (struct skl_dev *skl,struct skl_pipe *pipe) -{ -struct skl_pipe_fmt *cur_fmt; -struct skl_pipe_fmt *next_fmt; -int i; - -if (pipe->nr_cfgs <=1 ) -return false; - -if (pipe->conn_type !=SKL_PIPE_CONN_TYPE_FE ) -return true; - -for (i =0 ; i < pipe->nr_cfgs -1 ; i++) { -if (pipe->direction ==SNDRV_PCM_STREAM_PLAYBACK ) { - cur_fmt = &pipe->configs[i].out_fmt; - next_fmt = &pipe->configs[i +1 ].out_fmt; - }else { - cur_fmt = &pipe->configs[i].in_fmt; - next_fmt = &pipe->configs[i +1 ].in_fmt; - } - -if (!CHECK_HW_PARAMS (cur_fmt->channels, cur_fmt->freq, - cur_fmt->bps, - next_fmt->channels, - next_fmt->freq, - next_fmt->bps)) -return true; - } - -return false; -} -/* * Here, we select pipe format based on the pipe type and pipe * direction to determine the current config index for the pipeline.
@@ -636,14 +604,6 @@ skl_tplg_get_pipe_config(struct skl_dev *skl, struct skl_module_cfg *mconfig)return 0 ; } -if (skl_tplg_is_multi_fmt (skl, pipe)) { - pipe->cur_config_idx = pipe->pipe_config_idx; - pipe->memory_pages = pconfig->mem_pages; -dev_dbg (skl->dev,"found pipe config idx:%d\n" , - pipe->cur_config_idx); -return 0 ; - } -if (pipe->conn_type ==SKL_PIPE_CONN_TYPE_NONE || pipe->nr_cfgs ==1 ) {dev_dbg (skl->dev,"No conn_type or just 1 pathcfg, taking 0th for %d\n" , pipe->ppl_id);
Signature · 1 line
2.25.1
Cezary Rojewski
maintainerPATCH 3/5 ASoC: Intel: Skylake: Drop pipe_config_idx
In reply to Cezary RojewskiField ->pipe_config_idx duplicates the job of ->cur_config_idx so remove it.
--- sound/soc/intel/skylake/skl-topology.c | 10 +++++----- sound/soc/intel/skylake/skl-topology.h | 1 - 2 files changed, 5 insertions(+), 6 deletions(-)
sound/soc/intel/skylake/skl-topology.c +5 -5
@@ -1351,9 +1351,9 @@ static int skl_tplg_multi_config_set_get(struct snd_kcontrol *kcontrol,return -EIO ;if (is_set) - pipe->pipe_config_idx = ucontrol->value.enumerated.item[0 ]; + pipe->cur_config_idx = ucontrol->value.enumerated.item[0 ];else - ucontrol->value.enumerated.item[0 ] = pipe->pipe_config_idx; + ucontrol->value.enumerated.item[0 ] = pipe->cur_config_idx;return 0 ; }
@@ -1814,11 +1814,11 @@ static int skl_tplg_be_fill_pipe_params(struct snd_soc_dai *dai,if (ret) goto err; -dev_dbg (skl->dev,"%s using pipe config: %d\n" , __func__, pipe->pipe_config_idx); +dev_dbg (skl->dev,"%s using pipe config: %d\n" , __func__, pipe->cur_config_idx);if (pipe->direction ==SNDRV_PCM_STREAM_PLAYBACK ) - pipe_fmt = &pipe->configs[pipe->pipe_config_idx].out_fmt; + pipe_fmt = &pipe->configs[pipe->cur_config_idx].out_fmt;else - pipe_fmt = &pipe->configs[pipe->pipe_config_idx].in_fmt; + pipe_fmt = &pipe->configs[pipe->cur_config_idx].in_fmt;/* update the blob based on virtual bus_id*/ cfg = intel_nhlt_get_endpoint_blob(dai->dev, skl->nhlt,
sound/soc/intel/skylake/skl-topology.h +0 -1
@@ -324,7 +324,6 @@ struct skl_pipe {struct skl_path_config configs[SKL_MAX_PATH_CONFIGS ];struct list_head w_list;bool passthru; -u32 pipe_config_idx; };enum skl_module_state {
Signature · 1 line
2.25.1
Cezary Rojewski
maintainerPATCH 4/5 ASoC: Intel: Skylake: Introduce single place for pipe-config selection
In reply to Cezary RojewskiProvide a single location for pipe config selection where all fields that have to be updated whenever ->pipe_config_idx changes can be updated accordingly.
--- sound/soc/intel/skylake/skl-topology.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-)
sound/soc/intel/skylake/skl-topology.c +10 -8
@@ -582,6 +582,12 @@ static int skl_tplg_unload_pipe_modules(struct skl_dev *skl,return ret; } +static void skl_tplg_set_pipe_config_idx (struct skl_pipe *pipe,int idx) +{ + pipe->cur_config_idx = idx; + pipe->memory_pages = pipe->configs[idx].mem_pages; +} +/* * Here, we select pipe format based on the pipe type and pipe * direction to determine the current config index for the pipeline.
@@ -600,16 +606,14 @@ skl_tplg_get_pipe_config(struct skl_dev *skl, struct skl_module_cfg *mconfig)int i;if (pipe->nr_cfgs ==0 ) { - pipe->cur_config_idx =0 ; +skl_tplg_set_pipe_config_idx (pipe,0 );return 0 ; }if (pipe->conn_type ==SKL_PIPE_CONN_TYPE_NONE || pipe->nr_cfgs ==1 ) {dev_dbg (skl->dev,"No conn_type or just 1 pathcfg, taking 0th for %d\n" , pipe->ppl_id); - pipe->cur_config_idx =0 ; - pipe->memory_pages = pconfig->mem_pages; - +skl_tplg_set_pipe_config_idx (pipe,0 );return 0 ; }
@@ -628,10 +632,8 @@ skl_tplg_get_pipe_config(struct skl_dev *skl, struct skl_module_cfg *mconfig)if (CHECK_HW_PARAMS (params->ch, params->s_freq, params->s_fmt, fmt->channels, fmt->freq, fmt->bps)) { - pipe->cur_config_idx = i; - pipe->memory_pages = pconfig->mem_pages; +skl_tplg_set_pipe_config_idx (pipe, i);dev_dbg (skl->dev,"Using pipe config: %d\n" , i); -return 0 ; } }
@@ -1351,7 +1353,7 @@ static int skl_tplg_multi_config_set_get(struct snd_kcontrol *kcontrol,return -EIO ;if (is_set) - pipe->cur_config_idx = ucontrol->value.enumerated.item[0 ]; +skl_tplg_set_pipe_config_idx (pipe, ucontrol->value.enumerated.item[0 ]);else ucontrol->value.enumerated.item[0 ] = pipe->cur_config_idx;
Signature · 1 line
2.25.1
Cezary Rojewski
maintainerPATCH 5/5 ASoC: Intel: Skylake: Fix driver hang during shutdown
In reply to Cezary RojewskiAudioDSP cores and HDAudio links need to be turned off on shutdown to ensure no communication or data transfer occurs during the procedure.
--- sound/soc/intel/skylake/skl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
sound/soc/intel/skylake/skl.c +4 -1
@@ -1107,7 +1107,10 @@ static void skl_shutdown(struct pci_dev *pci)if (!skl->init_done)return ; -snd_hdac_stop_streams_and_chip (bus); +snd_hdac_stop_streams (bus); +snd_hdac_ext_bus_link_power_down_all (bus); +skl_dsp_sleep (skl->dsp); +list_for_each_entry (s, &bus->stream_list, list) { stream =stream_to_hdac_ext_stream (s);snd_hdac_ext_stream_decouple (bus, stream, false);
Signature · 1 line
2.25.1