virtio: vdpa: new SolidNET DPU driver.
Subsystems (2)
Alvaro Karsz
reviewerPATCH v3 1/1 virtio: vdpa: new SolidNET DPU driver.
This commit includes:
1) The driver to manage the controlplane over vDPA bus.
2) A HW monitor device to read health values from the DPU.
--
v2:
- Auto detect the BAR used for communication.
- When waiting for the DPU to write a config, wait for 5secs before giving up on the device.
- Return EOPNOTSUPP error code in vDPA set_vq_state callback if the vq state is not the same as the initial one.
- Implement a vDPA reset callback.
- Wait for an ACK when sending a message to the DPU.
- Add endianness comments on 64bit read/write functions.
- Remove the get_iova_range and free vDPA callbacks.
- Usage of managed device functions to ioremap a region.
- Call pci_set_drvdata and pci_set_master before vdpa_register_device.
- Create DMA isolation between the vDPA devices by using the chip SR-IOV feature.
Every vDPA device gets a PCIe VF with its own DMA device.
v3:
- Validate vDPA config length while receiving the DPU's config, not while trying to write the vDPA config to the DPU.
- Request IRQs when vDPA status is set to VIRTIO_CONFIG_S_DRIVER_OK.
- Remove snet_reset_dev() from the PCI remove function for a VF.
--- MAINTAINERS | 4 + drivers/vdpa/Kconfig | 11 + drivers/vdpa/Makefile | 1 + drivers/vdpa/solidrun/Makefile | 3 + drivers/vdpa/solidrun/snet_hwmon.c | 191 +++++ drivers/vdpa/solidrun/snet_main.c | 1115 ++++++++++++++++++++++++++++ drivers/vdpa/solidrun/snet_vdpa.h | 192 +++++ 7 files changed, 1517 insertions(+) create mode 100644 drivers/vdpa/solidrun/Makefile create mode 100644 drivers/vdpa/solidrun/snet_hwmon.c create mode 100644 drivers/vdpa/solidrun/snet_main.c create mode 100644 drivers/vdpa/solidrun/snet_vdpa.h
MAINTAINERS +4 -0
@@ -21725,6 +21725,10 @@ IFCVF VIRTIO DATA PATH ACCELERATOR R: Zhu Lingshan <[email protected]> F: drivers/vdpa/ifcvf/ +SNET DPU VIRTIO DATA PATH ACCELERATOR +R: Alvaro Karsz <[email protected]> +F: drivers/vdpa/solidrun/ + VIRTIO BALLOON M: "Michael S. Tsirkin" <[email protected]> M: David Hildenbrand <[email protected]>
drivers/vdpa/Kconfig +11 -0
@@ -86,4 +86,15 @@ config ALIBABA_ENI_VDPA VDPA driver for Alibaba ENI (Elastic Network Interface) which is built upon virtio 0.9.5 specification. + config SNET_VDPA + tristate "SolidRun's vDPA driver for SolidNET" + select HWMON + depends on PCI_MSI && PCI_IOV + help + vDPA driver for SolidNET DPU. + With this driver, the VirtIO dataplane can be + offloaded to a SolidNET DPU. + This driver includes a HW monitor device that + reads health values from the DPU. + endif # VDPA
drivers/vdpa/Makefile +1 -0
@@ -6,3 +6,4 @@ obj-$(CONFIG_IFCVF) += ifcvf/ obj-$(CONFIG_MLX5_VDPA) += mlx5/ obj-$(CONFIG_VP_VDPA) += virtio_pci/ obj-$(CONFIG_ALIBABA_ENI_VDPA) += alibaba/ +obj-$(CONFIG_SNET_VDPA) += solidrun/
drivers/vdpa/solidrun/Makefile new file +3 -0
@@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_SNET_VDPA) += snet_vdpa.o +snet_vdpa-$(CONFIG_SNET_VDPA) += snet_main.o snet_hwmon.o
drivers/vdpa/solidrun/snet_hwmon.c new file +191 -0
191 lines not on this page · raw message
drivers/vdpa/solidrun/snet_main.c new file +1115 -0
1,115 lines not on this page · raw message
drivers/vdpa/solidrun/snet_vdpa.h new file +192 -0
192 lines not on this page · raw message
Signature · 7 lines
2.32.0 _______________________________________________ Virtualization mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Alvaro Karsz
reviewerHi all,
I need to fix this version.
PCIe FLR capability is advertised, but using it may hang the device.
I will create a new version with quirk_no_flr.
Alvaro
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization