dt-bindings: nvmem: qfprom: add sdm670 compatible
PATCH 1/3 dt-bindings: nvmem: qfprom: add sdm670 compatible
There is some configuration in SDM670's QFPROM. Add the compatible for it.
---
Changes since v1:
- add ack tag
Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml +1 -0
@@ -27,6 +27,7 @@ properties: - qcom,sc7180-qfprom - qcom,sc7280-qfprom - qcom,sdm630-qfprom + - qcom,sdm670-qfprom - qcom,sdm845-qfprom - qcom,sm6115-qfprom - const: qcom,qfprom
Signature · 1 line
2.38.1
PATCH 2/3 arm64: dts: qcom: sdm670: add qfprom node
Some hardware quirks and capabilities can be determined by reading the fuse-programmable read-only memory. Add the QFPROM node so consumers know if they need to do anything extra to support the hardware.
---
Changes since v1:
- offset address by 0x4000 and zero-pad regs
arch/arm64/boot/dts/qcom/sdm670.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)
arch/arm64/boot/dts/qcom/sdm670.dtsi +7 -0
@@ -731,6 +731,13 @@ gcc: clock-controller@100000 { #power-domain-cells = <1>; }; + qfprom: qfprom@784000 { + compatible = "qcom,sdm670-qfprom", "qcom,qfprom"; + reg = <0 0x00784000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + sdhc_1: mmc@7c4000 { compatible = "qcom,sdm670-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x007c4000 0 0x1000>,
Signature · 1 line
2.38.1
Re: [PATCH 2/3] arm64: dts: qcom: sdm670: add qfprom node
Quoted 6 lines · Richard Acayan
Some hardware quirks and capabilities can be determined by reading the fuse-programmable read-only memory. Add the QFPROM node so consumers know if they need to do anything extra to support the hardware.
Signed-off-by Richard Acayan <[email protected]>---
Konrad
Quoted 24 lines
Changes since v1:
- offset address by0x4000and zero-pad regsarch/arm64/boot/dts/qcom/sdm670.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)arch/arm64/boot/dts/qcom/sdm670.dtsi +7
-0@@ -731,6 +731,13 @@ gcc: clock-controller@100000 { #power-domain-cells = <1>; }; + qfprom: qfprom@784000 { + compatible = "qcom,sdm670-qfprom", "qcom,qfprom"; + reg = <0 0x00784000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + sdhc_1: mmc@7c4000 { compatible = "qcom,sdm670-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x007c4000 0 0x1000>,
Re: [PATCH 2/3] arm64: dts: qcom: sdm670: add qfprom node
In reply to Richard AcayanQuoted 5 lines · Richard Acayan
Some hardware quirks and capabilities can be determined by reading the fuse-programmable read-only memory. Add the QFPROM node so consumers know if they need to do anything extra to support the hardware.
Signed-off-by Richard Acayan <[email protected]>
PS. Please include a "vN" in the []-part of subject when resubmitting patches. In this case passing -v 2 to git format-patch would do the trick for you.
I will pick this up after the upcoming merge window.
Thanks,
Bjorn
Quoted 28 lines
---
Changes since v1:
- offset address by0x4000and zero-pad regsarch/arm64/boot/dts/qcom/sdm670.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)arch/arm64/boot/dts/qcom/sdm670.dtsi +7
-0@@ -731,6 +731,13 @@ gcc: clock-controller@100000 { #power-domain-cells = <1>; }; + qfprom: qfprom@784000 { + compatible = "qcom,sdm670-qfprom", "qcom,qfprom"; + reg = <0 0x00784000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + sdhc_1: mmc@7c4000 { compatible = "qcom,sdm670-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x007c4000 0 0x1000>,Signature · 1 line
2.38.1
PATCH 3/3 arm64: dts: qcom: sdm670: add missing usb hstx nvmem cell
In reply to Richard AcayanThis nvmem cell is present on SDM670 as well as SDM845. Add it in SDM670 so there is proper tuning.
---
Changes since v1:
- remove "primary" indicator (SDM670 only has one USB controller)
arch/arm64/boot/dts/qcom/sdm670.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)
arch/arm64/boot/dts/qcom/sdm670.dtsi +7 -0
@@ -736,6 +736,11 @@ qfprom: qfprom@784000 { reg = <0 0x00784000 0 0x1000>; #address-cells = <1>; #size-cells = <1>; + + qusb2_hstx_trim: hstx-trim@1eb { + reg = <0x1eb 0x1>; + bits = <1 4>; + }; }; sdhc_1: mmc@7c4000 {
@@ -1418,6 +1423,8 @@ usb_1_hsphy: phy@88e2000 { resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + status = "disabled"; };
Signature · 1 line
2.38.1
Re: [PATCH 3/3] arm64: dts: qcom: sdm670: add missing usb hstx nvmem cell
Quoted 5 lines · Richard Acayan
This nvmem cell is present on SDM670 as well as SDM845. Add it in SDM670 so there is proper tuning.
Signed-off-by Richard Acayan <[email protected]>---
Konrad
Quoted 31 lines
Changes since v1:
- remove "primary" indicator (SDM670 only has one USB controller)arch/arm64/boot/dts/qcom/sdm670.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)arch/arm64/boot/dts/qcom/sdm670.dtsi +7
-0@@ -736,6 +736,11 @@ qfprom: qfprom@784000 { reg = <0 0x00784000 0 0x1000>; #address-cells = <1>; #size-cells = <1>; + + qusb2_hstx_trim: hstx-trim@1eb { + reg = <0x1eb 0x1>; + bits = <1 4>; + }; }; sdhc_1: mmc@7c4000 {@@ -1418,6 +1423,8 @@ usb_1_hsphy: phy@88e2000 { resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + status = "disabled"; };
Re: (subset) [PATCH 1/3] dt-bindings: nvmem: qfprom: add sdm670 compatible
In reply to Richard AcayanQuoted 4 lines · Richard Acayan
There is some configuration in SDM670's QFPROM. Add the compatible for it.
Applied, thanks!
[2/3] arm64: dts: qcom: sdm670: add qfprom node
commit: 7bff6f4351bf82c0b9279fc711b730d2d28b8b8c
[3/3] arm64: dts: qcom: sdm670: add missing usb hstx nvmem cell
commit: cb98187a6883c498b0702cedc1f59247e7857beaBest regards,
Signature · 1 line
Bjorn Andersson <[email protected]>