hwmon: (pmbus/ltc2978) add support for LTC7132
Subsystems (2)
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH v2 1/1 hwmon: (pmbus/ltc2978) add support for LTC7132
Add support for LTC7132.
The relevant registers in the LTC7132 are identical to the LTC7880. So it's just a matter of adding the chip id.
--- drivers/hwmon/pmbus/ltc2978.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)
drivers/hwmon/pmbus/ltc2978.c +11 -6
@@ -23,7 +23,7 @@ enum chips {/* Managers */ ltc2972, ltc2974, ltc2975, ltc2977, ltc2978, ltc2979, ltc2980,/* Controllers */ - ltc3880, ltc3882, ltc3883, ltc3884, ltc3886, ltc3887, ltc3889, ltc7880, + ltc3880, ltc3882, ltc3883, ltc3884, ltc3886, ltc3887, ltc3889, ltc7132, ltc7880,/* Modules */ ltm2987, ltm4664, ltm4675, ltm4676, ltm4677, ltm4678, ltm4680, ltm4686, ltm4700,
@@ -45,15 +45,14 @@ enum chips {#define LTC2974_MFR_IOUT_PEAK 0xd7#define LTC2974_MFR_IOUT_MIN 0xd8 -/* LTC3880, LTC3882, LTC3883, LTC3887, LTM4675, and LTM4676 */ +/* LTC3880, LTC3882, LTC3883, LTC3887, LTM4675, LTM4676, LTC7132 */ #define LTC3880_MFR_IOUT_PEAK 0xd7#define LTC3880_MFR_CLEAR_PEAKS 0xe3#define LTC3880_MFR_TEMPERATURE2_PEAK 0xf4 -/* LTC3883, LTC3884, LTC3886, LTC3889 and LTC7880 only */ +/* LTC3883, LTC3884, LTC3886, LTC3889, LTC7132, LTC7880 */ #define LTC3883_MFR_IIN_PEAK 0xe1 -/* LTC2975 only */ #define LTC2975_MFR_IIN_PEAK 0xc4#define LTC2975_MFR_IIN_MIN 0xc5
@@ -79,10 +78,11 @@ enum chips {#define LTC3884_ID 0x4C00#define LTC3886_ID 0x4600#define LTC3887_ID 0x4700 -#define LTM2987_ID_A 0x8010/* A/B for two die IDs */ -#define LTM2987_ID_B 0x8020#define LTC3889_ID 0x4900 +#define LTC7132_ID 0x4CE0#define LTC7880_ID 0x49E0 +#define LTM2987_ID_A 0x8010/* A/B for two die IDs */ +#define LTM2987_ID_B 0x8020#define LTM4664_ID 0x4120#define LTM4675_ID 0x47a0#define LTM4676_ID_REV1 0x4400
@@ -547,6 +547,7 @@ static const struct i2c_device_id ltc2978_id[] = { {"ltc3886", ltc3886}, {"ltc3887", ltc3887}, {"ltc3889", ltc3889}, + {"ltc7132", ltc7132}, {"ltc7880", ltc7880}, {"ltm2987", ltm2987}, {"ltm4664", ltm4664},
@@ -651,6 +652,8 @@ static int ltc2978_get_id(struct i2c_client *client)return ltc3887; else if (chip_id == LTC3889_ID) return ltc3889; + else if (chip_id == LTC7132_ID) + return ltc7132; else if (chip_id == LTC7880_ID) return ltc7880; else if (chip_id == LTM2987_ID_A || chip_id == LTM2987_ID_B)
@@ -831,6 +834,7 @@ static int ltc2978_probe(struct i2c_client *client)case ltc3884:case ltc3886:case ltc3889: +case ltc7132:case ltc7880:case ltm4664:case ltm4678:
@@ -902,6 +906,7 @@ static const struct of_device_id ltc2978_of_match[] = { { .compatible = "lltc,ltc3886" }, { .compatible = "lltc,ltc3887" }, { .compatible = "lltc,ltc3889" }, + { .compatible = "lltc,ltc7132" }, { .compatible = "lltc,ltc7880" }, { .compatible = "lltc,ltm2987" }, { .compatible = "lltc,ltm4664" },
Signature · 1 line
2.30.2
Quoted 5 lines · Felix Nieuwenhuizen
Add support for LTC7132.
The relevant registers in the LTC7132 are identical to the LTC7880. So it's just a matter of adding the chip id.Signed-off-by Felix Nieuwenhuizen <[email protected]>
Applied to hwmon-next.
Thanks,
Guenter
Rob Herring
maintainerQuoted 80 lines · Felix Nieuwenhuizen
Add support for LTC7132.
The relevant registers in the LTC7132 are identical to the LTC7880. So it's just a matter of adding the chip id.Signed-off-by Felix Nieuwenhuizen <[email protected]>--- drivers/hwmon/pmbus/ltc2978.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)drivers/hwmon/pmbus/ltc2978.c +10
-6@@ -23,7 +23,7 @@ enum chips {/* Managers */ ltc2972, ltc2974, ltc2975, ltc2977, ltc2978, ltc2979, ltc2980,/* Controllers */ - ltc3880, ltc3882, ltc3883, ltc3884, ltc3886, ltc3887, ltc3889, ltc7880, + ltc3880, ltc3882, ltc3883, ltc3884, ltc3886, ltc3887, ltc3889, ltc7132, ltc7880,/* Modules */ ltm2987, ltm4664, ltm4675, ltm4676, ltm4677, ltm4678, ltm4680, ltm4686, ltm4700,@@ -45,15 +45,14 @@ enum chips {#define LTC2974_MFR_IOUT_PEAK 0xd7#define LTC2974_MFR_IOUT_MIN 0xd8 -/* LTC3880, LTC3882, LTC3883, LTC3887, LTM4675, and LTM4676 */ +/* LTC3880, LTC3882, LTC3883, LTC3887, LTM4675, LTM4676, LTC7132 */ #define LTC3880_MFR_IOUT_PEAK 0xd7#define LTC3880_MFR_CLEAR_PEAKS 0xe3#define LTC3880_MFR_TEMPERATURE2_PEAK 0xf4 -/* LTC3883, LTC3884, LTC3886, LTC3889 and LTC7880 only */ +/* LTC3883, LTC3884, LTC3886, LTC3889, LTC7132, LTC7880 */ #define LTC3883_MFR_IIN_PEAK 0xe1 -/* LTC2975 only */ #define LTC2975_MFR_IIN_PEAK 0xc4#define LTC2975_MFR_IIN_MIN 0xc5@@ -79,10 +78,11 @@ enum chips {#define LTC3884_ID 0x4C00#define LTC3886_ID 0x4600#define LTC3887_ID 0x4700 -#define LTM2987_ID_A 0x8010/* A/B for two die IDs */ -#define LTM2987_ID_B 0x8020#define LTC3889_ID 0x4900 +#define LTC7132_ID 0x4CE0#define LTC7880_ID 0x49E0 +#define LTM2987_ID_A 0x8010/* A/B for two die IDs */ +#define LTM2987_ID_B 0x8020#define LTM4664_ID 0x4120#define LTM4675_ID 0x47a0#define LTM4676_ID_REV1 0x4400@@ -547,6 +547,7 @@ static const struct i2c_device_id ltc2978_id[] = { {"ltc3886", ltc3886}, {"ltc3887", ltc3887}, {"ltc3889", ltc3889}, + {"ltc7132", ltc7132}, {"ltc7880", ltc7880}, {"ltm2987", ltm2987}, {"ltm4664", ltm4664},@@ -651,6 +652,8 @@ static int ltc2978_get_id(struct i2c_client *client)return ltc3887; else if (chip_id == LTC3889_ID) return ltc3889; + else if (chip_id == LTC7132_ID) + return ltc7132; else if (chip_id == LTC7880_ID) return ltc7880; else if (chip_id == LTM2987_ID_A || chip_id == LTM2987_ID_B)@@ -831,6 +834,7 @@ static int ltc2978_probe(struct i2c_client *client)case ltc3884:case ltc3886:case ltc3889: +case ltc7132:case ltc7880:case ltm4664:case ltm4678:
drivers/hwmon/pmbus/ltc2978.c static const struct of_device_id ltc2978_of_match[] = { · line 909
Quoted 4 lines
drivers/hwmon/pmbus/ltc2978.c +1
-0@@ -902,6 +906,7 @@ static const struct of_device_id ltc2978_of_match[] = { { .compatible = "lltc,ltc3886" }, { .compatible = "lltc,ltc3887" }, { .compatible = "lltc,ltc3889" }, + { .compatible = "lltc,ltc7132" },
This compatible string is not documented. Please add it to the bindings.
Rob
PATCH 1/1 hwmon: (pmbus/ltc2978) add support for LTC7132 - docs
Add missing compatible string "lltc,ltc7132" to the bindings documentation.
--- Documentation/devicetree/bindings/hwmon/ltc2978.txt | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/hwmon/ltc2978.txt +1 -0
@@ -16,6 +16,7 @@ Required properties: * "lltc,ltc3886" * "lltc,ltc3887" * "lltc,ltc3889" + * "lltc,ltc7132" * "lltc,ltc7880" * "lltc,ltm2987" * "lltc,ltm4664"
Signature · 1 line
2.30.2
Guenter Roeck
maintainerRe: [PATCH] hwmon: (pmbus/ltc2978) add support for LTC7132 - docs
Quoted 3 lines · Felix Nieuwenhuizen
Add missing compatible string "lltc,ltc7132" to the bindings documentation.
Signed-off-by Felix Nieuwenhuizen <[email protected]>
This needs to be reviewed by a DT maintainer. Please refer to scripts/get_maintainer.pl to determine who needs to be copied.
Guenter
Quoted 16 lines
--- Documentation/devicetree/bindings/hwmon/ltc2978.txt | 1 + 1 file changed, 1 insertion(+)Documentation/devicetree/bindings/hwmon/ltc2978.txt +1
-0@@ -16,6 +16,7 @@ Required properties: * "lltc,ltc3886" * "lltc,ltc3887" * "lltc,ltc3889" + * "lltc,ltc7132" * "lltc,ltc7880" * "lltc,ltm2987" * "lltc,ltm4664"