wiphy: use enum band_freq with rates getter
PATCH v3 1/4 wiphy: use enum band_freq with rates getter
wiphy_get_supported_rates expected an enum defined in the nl80211 header but the argument type was an unsigned int, not exactly intuitive to anyone using the API. Since the nl80211 enum value was only used in a switch statement it could just as well be IWD's internal enum band_freq.
This also allows modules which do not reference nl80211.h to use wiphy_get_supported_rates().
--- src/scan.c | 2 +- src/wiphy.c | 9 +++++---- src/wiphy.h | 4 +++- 3 files changed, 9 insertions(+), 6 deletions(-)
src/scan.c +1 -1
@@ -426,7 +426,7 @@ static struct l_genl_msg *scan_build_cmd(struct scan_context *sc,* rates we don't want to advertise support for 802.11b rates. */ if (L_WARN_ON (!(supported =wiphy_get_supported_rates (sc->wiphy, -NL80211_BAND_2GHZ , +BAND_FREQ_2_4_GHZ , &num_supported)))) goto done;
src/wiphy.c +5 -4
@@ -788,19 +788,20 @@ bool wiphy_supports_iftype(struct wiphy *wiphy, uint32_t iftype)return wiphy->supported_iftypes & (1 << (iftype -1 )); } -const uint8_t *wiphy_get_supported_rates (struct wiphy *wiphy,unsigned int band, +const uint8_t *wiphy_get_supported_rates (struct wiphy *wiphy, +enum band_freq band,unsigned int *out_num) {struct band *bandp;switch (band) { -case NL80211_BAND_2GHZ : +case BAND_FREQ_2_4_GHZ : bandp = wiphy->band_2g;break ; -case NL80211_BAND_5GHZ : +case BAND_FREQ_5_GHZ : bandp = wiphy->band_5g;break ; -case NL80211_BAND_6GHZ : +case BAND_FREQ_6_GHZ : bandp = wiphy->band_6g;break ;default :
src/wiphy.h +3 -1
@@ -29,6 +29,7 @@ struct scan_freq_set;struct wiphy_radio_work_item ;struct ie_rsn_info ;enum security ; +enum band_freq ;typedef bool (*wiphy_radio_work_func_t )(struct wiphy_radio_work_item *item); typedef void (*wiphy_radio_work_destroy_func_t)(
@@ -112,7 +113,8 @@ uint8_t wiphy_get_max_num_ssids_per_scan(struct wiphy *wiphy);uint16_t wiphy_get_max_scan_ie_len (struct wiphy *wiphy);uint32_t wiphy_get_max_roc_duration (struct wiphy *wiphy);bool wiphy_supports_iftype (struct wiphy *wiphy,uint32_t iftype); -const uint8_t *wiphy_get_supported_rates (struct wiphy *wiphy,unsigned int band, +const uint8_t *wiphy_get_supported_rates (struct wiphy *wiphy, +enum band_freq band,unsigned int *out_num);bool wiphy_supports_adhoc_rsn (struct wiphy *wiphy);bool wiphy_can_offchannel_tx (struct wiphy *wiphy);
Signature · 1 line
2.34.3
PATCH v3 2/4 ap: add support for 5GHz frequencies in AP mode
This enables IWD to use 5GHz frequencies in AP mode. Currently 6GHz is not supported so we can assume a [General].Channel value 36 or above indicates the 5GHz band.
It should be noted that the system will probably need a regulatory domain set in order for 5GHz to be allowed in AP mode. This is due to world roaming (00) restricting any/all 5GHz frequencies. This can be accomplished by setting main.conf [General].Country=CC to the country this AP will operate in.
--- src/ap.c | 73 +++++++++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 65 insertions(+), 8 deletions(-)
src/ap.c +65 -8
@@ -70,6 +70,7 @@ struct ap_state {char ssid[33 ];char passphrase[64 ];uint8_t psk[32 ]; +enum band_freq band;uint8_t channel;uint8_t *authorized_macs;unsigned int authorized_macs_num;
@@ -985,7 +986,7 @@ static uint32_t ap_send_mgmt_frame(struct ap_state *ap,frame_xchg_cb_t callback, void *user_data) { - uint32_t ch_freq = band_channel_to_freq(ap->channel, BAND_FREQ_2_4_GHZ); + uint32_t ch_freq = band_channel_to_freq(ap->channel, ap->band);uint64_t wdev_id =netdev_get_wdev_id (ap->netdev);struct iovec iov[2 ];
@@ -2408,7 +2409,7 @@ static struct l_genl_msg *ap_build_cmd_start_ap(struct ap_state *ap)uint32_t nl_akm =CRYPTO_AKM_PSK ;uint32_t wpa_version =NL80211_WPA_VERSION_2 ;uint32_t auth_type =NL80211_AUTHTYPE_OPEN_SYSTEM ; -uint32_t ch_freq =band_channel_to_freq (ap->channel,BAND_FREQ_2_4_GHZ ); +uint32_t ch_freq =band_channel_to_freq (ap->channel, ap->band);uint32_t ch_width =NL80211_CHAN_WIDTH_20 ;unsigned int i;
@@ -3170,6 +3171,42 @@ static char **ap_ciphers_to_strv(uint16_t ciphers)return list; } +static bool ap_validate_band_channel (struct ap_state *ap) +{ +struct wiphy *wiphy =netdev_get_wiphy (ap->netdev); +const struct scan_freq_set *supported; +const struct scan_freq_set *disabled; +uint32_t freq; + +if (!(wiphy_get_supported_bands (wiphy) & ap->band)) { +l_error ("AP hardware does not support band" ); +return -EINVAL ; + } + + freq =band_channel_to_freq (ap->channel, ap->band); +if (!freq) { +l_error ("AP invalid band (%s) and channel (%u) combination" , + (ap->band &BAND_FREQ_5_GHZ ) ?"5Ghz" :"2.4GHz" , + ap->channel); +return false; + } + + supported =wiphy_get_supported_freqs (wiphy); + disabled =wiphy_get_disabled_freqs (wiphy); + +if (!scan_freq_set_contains (supported, freq)) { +l_error ("AP hardware does not support frequency %u" , freq); +return false; + } + +if (scan_freq_set_contains (disabled, freq)) { +l_error ("AP hardware has frequency %u disabled" , freq); +return false; + } + +return true; +} +static int ap_load_config (struct ap_state *ap,const struct l_settings *config,bool *out_cck_rates) {
@@ -3214,17 +3251,31 @@ static int ap_load_config(struct ap_state *ap, const struct l_settings *config,unsigned int uintval;if (!l_settings_get_uint (config,"General" ,"Channel" , - &uintval) || - !band_channel_to_freq (uintval, -BAND_FREQ_2_4_GHZ )) { + &uintval)) {l_error ("AP Channel value unsupported" );return -EINVAL ; } ap->channel = uintval; - }else + +/* +* 6GHz is not supported so we can use only a channel number to +* distinguish between 2.4 and 5GHz. +*/ +if (ap->channel >=36 ) + ap->band =BAND_FREQ_5_GHZ ; +else + ap->band =BAND_FREQ_2_4_GHZ ; + }else {/* TODO: Start a Get Survey to decide the channel */ ap->channel =6 ; + ap->band =BAND_FREQ_2_4_GHZ ; + } + +if (!ap_validate_band_channel (ap)) { +l_error ("AP Band and Channel combination invalid" ); +return -EINVAL ; + } strval =l_settings_get_string (config,"WSC" ,"DeviceName" );if (strval) {
@@ -3290,7 +3341,13 @@ static int ap_load_config(struct ap_state *ap, const struct l_settings *config,l_strfreev (strvval); } - if (l_settings_get_value(config, "General", "NoCCKRates")) { +/* +* Since 5GHz won't ever support only CCK rates we can ignore this +* setting on that band. +*/ +if (ap->band &BAND_FREQ_5_GHZ ) + *out_cck_rates = false; + else if (l_settings_get_value(config, "General", "NoCCKRates")) { bool boolval; if (!l_settings_get_bool(config, "General", "NoCCKRates",
@@ -4080,7 +4137,7 @@ static bool ap_dbus_property_get_freq(struct l_dbus *dbus,if (!ap_if->ap || !ap_if->ap->started)return false; - freq =band_channel_to_freq (ap_if->ap->channel,BAND_FREQ_2_4_GHZ ); + freq =band_channel_to_freq (ap_if->ap->channel, ap_if->ap->band);l_dbus_message_builder_append_basic (builder,'u' , &freq);
Signature · 1 line
2.34.3
PATCH v3 3/4 ap: select rates from hardware capabilities
In reply to James PrestwoodRather than a list of static rates, choose what the hardware advertises. For the case of CCK rates only include rates 11mbps or lower.
--- src/ap.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-)
src/ap.c +12 -14
@@ -3438,6 +3438,9 @@ struct ap_state *ap_start(struct netdev *netdev, struct l_settings *config,uint64_t wdev_id =netdev_get_wdev_id (netdev);int err;bool cck_rates = true; +const uint8_t *rates; +unsigned int num_rates; +unsigned int i;if (L_WARN_ON (!config)) {if (err_out)
@@ -3463,22 +3466,17 @@ struct ap_state *ap_start(struct netdev *netdev, struct l_settings *config,wsc_uuid_from_addr (netdev_get_address (netdev), ap->wsc_uuid_r); + rates =wiphy_get_supported_rates (wiphy, ap->band, &num_rates); +if (!rates) + goto error; + ap->rates =l_uintset_new (200 ); -/* TODO: Pick from actual supported rates */ -if (!cck_rates) { -l_uintset_put (ap->rates,12 );/* 6 Mbps*/ -l_uintset_put (ap->rates,18 );/* 9 Mbps*/ -l_uintset_put (ap->rates,24 );/* 12 Mbps*/ -l_uintset_put (ap->rates,36 );/* 18 Mbps*/ -l_uintset_put (ap->rates,48 );/* 24 Mbps*/ -l_uintset_put (ap->rates,72 );/* 36 Mbps*/ -l_uintset_put (ap->rates,96 );/* 48 Mbps*/ -l_uintset_put (ap->rates,108 );/* 54 Mbps*/ - }else { -l_uintset_put (ap->rates,2 );/* 1 Mbps*/ -l_uintset_put (ap->rates,11 );/* 5.5 Mbps*/ -l_uintset_put (ap->rates,22 );/* 11 Mbps*/ +for (i =0 ; i < num_rates; i++) { +if (cck_rates && !L_IN_SET (rates[i],2 ,4 ,11 ,22 )) +continue ; + +l_uintset_put (ap->rates, rates[i]); } if (!frame_watch_add(wdev_id, 0, 0x0000 |
Signature · 1 line
2.34.3
PATCH v3 4/4 doc: document 5GHz AP support
In reply to James Prestwood--- src/iwd.ap.rst | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
src/iwd.ap.rst +11 -2
@@ -55,8 +55,17 @@ The group ``[General]`` contains general AP configuration. * - Channel - Channel number - Optional channel number for the access point to operate on. Only the - 2.4GHz-band channels are currently allowed. + Optional channel number for the access point to operate on. If omitted + the channel will be chosen automatically. Channels greater than or equal + to 36 will select the 5GHz band for the AP to operate on. + + Note: Due to regulatory requirements the linux kernel does not allow or + strictly limits 5GHz use in AP mode while in world roaming. These + frequencies become available once the country is set, either via IWD's + main.conf option ``[General].Country`` (see ``man iwd.config``) or + externally (e.g. iw reg set <CC>). If you are having trouble using 5GHz + ensure the country is set, and that the desired frequency/channel is + unrestricted. Network Authentication Settings -------------------------------
Signature · 1 line
2.34.3
Hi James,
Quoted 6 lines · James Prestwood
wiphy_get_supported_ratesexpected an enum defined in the nl80211 header but the argument type was an unsigned int, not exactly intuitive to anyone using the API. Since the nl80211 enum value was only used in a switch statement it could just as well be IWD's internal enumband_freq.
Quoted 8 lines
This also allows modules which do not reference
nl80211.hto usewiphy_get_supported_rates().--- src/scan.c | 2 +- src/wiphy.c | 9 +++++---- src/wiphy.h | 4 +++- 3 files changed, 9 insertions(+), 6 deletions(-)
All applied, thanks.
Regards,
-Denis