Skip to contentSkip to conversation

HID: ite: Add support for Acer S1002 keyboard-dock

PATCH New Sasha Levin 1 participant 7 messages Dec 12, 2022

Subsystems (5)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/7 HID: ite: Add support for Acer S1002 keyboard-dock

From: Hans de Goede <[email protected]>

[ Upstream commit c961facb5b19634eee5bcdd91fc5bf3f1c545bc5 ]

Make the hid-ite driver handle the Acer S1002 keyboard-dock, this leads to 2 improvements:

1. The non working wifi-toggle hotkey now works.
2. Toggling the touchpad on of with the hotkey will no show OSD notifications in e.g. GNOME3. The actual toggling is handled inside the keyboard, this adds support for notifying evdev listeners about this.

Stable-dep-of: 9ad6645a9dce ("HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch V 10")

---
 drivers/hid/hid-ids.h |  1 +
 drivers/hid/hid-ite.c | 13 ++++++++++++-
 2 files changed, 13 insertions(+), 1 deletion(-)
drivers/hid/hid-ids.h +1 -0
index d6cd94cad571..c54dcff2e556 100644
@@ -1138,6 +1138,7 @@
 #define USB_DEVICE_ID_SYNAPTICS_DELL_K12A	0x2819
 #define USB_DEVICE_ID_SYNAPTICS_ACER_SWITCH5_012	0x2968
 #define USB_DEVICE_ID_SYNAPTICS_TP_V103	0x5710
+#define USB_DEVICE_ID_SYNAPTICS_ACER_ONE_S1002	0x73f4
 #define USB_DEVICE_ID_SYNAPTICS_ACER_ONE_S1003	0x73f5
 #define USB_DEVICE_ID_SYNAPTICS_ACER_SWITCH5	0x81a7
 
drivers/hid/hid-ite.c +12 -1
index 742c052b0110..22bfbebceaf4 100644
@@ -18,10 +18,16 @@ static __u8 *ite_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int
 	unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
 
 	if (quirks & QUIRK_TOUCHPAD_ON_OFF_REPORT) {
+		/* For Acer Aspire Switch 10 SW5-012 keyboard-dock */
 		if (*rsize == 188 && rdesc[162] == 0x81 && rdesc[163] == 0x02) {
-			hid_info(hdev, "Fixing up ITE keyboard report descriptor\n");
+			hid_info(hdev, "Fixing up Acer Sw5-012 ITE keyboard report descriptor\n");
 			rdesc[163] = HID_MAIN_ITEM_RELATIVE;
 		}
+		/* For Acer One S1002 keyboard-dock */
+		if (*rsize == 188 && rdesc[185] == 0x81 && rdesc[186] == 0x02) {
+			hid_info(hdev, "Fixing up Acer S1002 ITE keyboard report descriptor\n");
+			rdesc[186] = HID_MAIN_ITEM_RELATIVE;
+		}
 	}
 
 	return rdesc;
@@ -101,6 +107,11 @@ static const struct hid_device_id ite_devices[] = {
 		     USB_DEVICE_ID_SYNAPTICS_ACER_SWITCH5_012),
 	  .driver_data = QUIRK_TOUCHPAD_ON_OFF_REPORT },
 	/* ITE8910 USB kbd ctlr, with Synaptics touchpad connected to it. */
+	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
+		     USB_VENDOR_ID_SYNAPTICS,
+		     USB_DEVICE_ID_SYNAPTICS_ACER_ONE_S1002),
+	  .driver_data = QUIRK_TOUCHPAD_ON_OFF_REPORT },
+	/* ITE8910 USB kbd ctlr, with Synaptics touchpad connected to it. */
 	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
 		     USB_VENDOR_ID_SYNAPTICS,
 		     USB_DEVICE_ID_SYNAPTICS_ACER_ONE_S1003) },
Signature · 1 line
2.35.1
author maintainer
#1 lore raw

PATCH 2/7 HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch 10E

From: Hans de Goede <[email protected]>

[ Upstream commit b7c20f3815985570ac71c39b1a3e68c201109578 ]

The Acer Aspire Switch 10E (SW3-016)'s keyboard-dock uses the same USB-ids as the Acer One S1003 keyboard-dock. Yet they are not entirely the same:

1. The S1003 keyboard-dock has the same report descriptors as the S1002 keyboard-dock (which has different USB-ids)

2. The Acer Aspire Switch 10E's keyboard-dock has different report descriptors from the S1002/S1003 keyboard docks and it sends 0x00880078 / 0x00880079 usage events when the touchpad is toggled on/off (which is handled internally).

This means that all Acer kbd-docks handled by the hid-ite.c drivers report their touchpad being toggled on/off through these custom usage-codes with the exception of the S1003 dock, which likely is a bug of that dock.

Add a QUIRK_TOUCHPAD_ON_OFF_REPORT quirk for the Aspire Switch 10E / S1003 usb-id so that the touchpad toggling will get reported to userspace on the Aspire Switch 10E.

Since the Aspire Switch 10E's kbd-dock has different report-descriptors, this also requires adding support for fixing those to ite_report_fixup().

Setting the quirk will also cause ite_report_fixup() to hit the S1002/S1003 descriptors path on the S1003. Since the S1003 kbd-dock never generates any input-reports for the fixed up part of the descriptors this does not matter; and if there are versions out there which do actually send input-reports for the touchpad-toggle then the fixup should actually help to make things work.

This was tested on both an Acer Aspire Switch 10E and on an Acer One S1003.

Stable-dep-of: 9ad6645a9dce ("HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch V 10")

---
 drivers/hid/hid-ite.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
drivers/hid/hid-ite.c +9 -3
index 22bfbebceaf4..14fc068affad 100644
@@ -23,11 +23,16 @@ static __u8 *ite_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int
 			hid_info(hdev, "Fixing up Acer Sw5-012 ITE keyboard report descriptor\n");
 			rdesc[163] = HID_MAIN_ITEM_RELATIVE;
 		}
-		/* For Acer One S1002 keyboard-dock */
+		/* For Acer One S1002/S1003 keyboard-dock */
 		if (*rsize == 188 && rdesc[185] == 0x81 && rdesc[186] == 0x02) {
-			hid_info(hdev, "Fixing up Acer S1002 ITE keyboard report descriptor\n");
+			hid_info(hdev, "Fixing up Acer S1002/S1003 ITE keyboard report descriptor\n");
 			rdesc[186] = HID_MAIN_ITEM_RELATIVE;
 		}
+		/* For Acer Aspire Switch 10E (SW3-016) keyboard-dock */
+		if (*rsize == 210 && rdesc[184] == 0x81 && rdesc[185] == 0x02) {
+			hid_info(hdev, "Fixing up Acer Aspire Switch 10E (SW3-016) ITE keyboard report descriptor\n");
+			rdesc[185] = HID_MAIN_ITEM_RELATIVE;
+		}
 	}
 
 	return rdesc;
@@ -114,7 +119,8 @@ static const struct hid_device_id ite_devices[] = {
 	/* ITE8910 USB kbd ctlr, with Synaptics touchpad connected to it. */
 	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
 		     USB_VENDOR_ID_SYNAPTICS,
-		     USB_DEVICE_ID_SYNAPTICS_ACER_ONE_S1003) },
+		     USB_DEVICE_ID_SYNAPTICS_ACER_ONE_S1003),
+	  .driver_data = QUIRK_TOUCHPAD_ON_OFF_REPORT },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, ite_devices);
Signature · 1 line
2.35.1
author maintainer
#2 lore raw

PATCH 3/7 HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch V 10

In reply to Sasha Levin

From: Hans de Goede <[email protected]>

[ Upstream commit 9ad6645a9dce4d0e42daca6ebf32a154401c59d3 ]

The Acer Aspire Switch V 10 (SW5-017)'s keyboard-dock uses the same ITE controller setup as other Acer Switch 2-in-1's.

This needs special handling for the wifi on/off toggle hotkey as well as to properly report touchpad on/off keypresses.

Add the USB-ids for the SW5-017's keyboard-dock with a quirk setting of QUIRK_TOUCHPAD_ON_OFF_REPORT to fix both issues.

---
 drivers/hid/hid-ids.h | 1 +
 drivers/hid/hid-ite.c | 5 +++++
 2 files changed, 6 insertions(+)
drivers/hid/hid-ids.h +1 -0
index c54dcff2e556..8d11356df98a 100644
@@ -1140,6 +1140,7 @@
 #define USB_DEVICE_ID_SYNAPTICS_TP_V103	0x5710
 #define USB_DEVICE_ID_SYNAPTICS_ACER_ONE_S1002	0x73f4
 #define USB_DEVICE_ID_SYNAPTICS_ACER_ONE_S1003	0x73f5
+#define USB_DEVICE_ID_SYNAPTICS_ACER_SWITCH5_017	0x73f6
 #define USB_DEVICE_ID_SYNAPTICS_ACER_SWITCH5	0x81a7
 
 #define USB_VENDOR_ID_TEXAS_INSTRUMENTS	0x2047
drivers/hid/hid-ite.c +5 -0
index 14fc068affad..b8cce9c196d8 100644
@@ -121,6 +121,11 @@ static const struct hid_device_id ite_devices[] = {
 		     USB_VENDOR_ID_SYNAPTICS,
 		     USB_DEVICE_ID_SYNAPTICS_ACER_ONE_S1003),
 	  .driver_data = QUIRK_TOUCHPAD_ON_OFF_REPORT },
+	/* ITE8910 USB kbd ctlr, with Synaptics touchpad connected to it. */
+	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
+		     USB_VENDOR_ID_SYNAPTICS,
+		     USB_DEVICE_ID_SYNAPTICS_ACER_SWITCH5_017),
+	  .driver_data = QUIRK_TOUCHPAD_ON_OFF_REPORT },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, ite_devices);
Signature · 1 line
2.35.1
author maintainer
#3 lore raw

PATCH 4/7 HID: uclogic: Add HID_QUIRK_HIDINPUT_FORCE quirk

In reply to Sasha Levin

From: José Expósito <[email protected]>

[ Upstream commit 3405a4beaaa852f3ed2a5eb3b5149932d5c3779b ]

Commit f7d8e387d9ae ("HID: uclogic: Switch to Digitizer usage for styluses") changed the usage used in UCLogic from "Pen" to "Digitizer".

However, the IS_INPUT_APPLICATION() macro evaluates to false for HID_DG_DIGITIZER causing issues with the XP-Pen Star G640 tablet.

Add the HID_QUIRK_HIDINPUT_FORCE quirk to bypass the IS_INPUT_APPLICATION() check.

---
 drivers/hid/hid-uclogic-core.c | 1 +
 1 file changed, 1 insertion(+)
drivers/hid/hid-uclogic-core.c +1 -0
index 4edb24195704..e4811d37ca77 100644
@@ -172,6 +172,7 @@ static int uclogic_probe(struct hid_device *hdev,
 	 * than the pen, so use QUIRK_MULTI_INPUT for all tablets.
 	 */
 	hdev->quirks |= HID_QUIRK_MULTI_INPUT;
+	hdev->quirks |= HID_QUIRK_HIDINPUT_FORCE;
 
 	/* Allocate and assign driver data */
 	drvdata = devm_kzalloc(&hdev->dev, sizeof(*drvdata), GFP_KERNEL);
Signature · 1 line
2.35.1
author maintainer
#4 lore raw

PATCH 5/7 HID: usbhid: Add ALWAYS_POLL quirk for some mice

In reply to Sasha Levin

From: Ankit Patel <[email protected]>

[ Upstream commit f6d910a89a2391e5ce1f275d205023880a33d3f8 ]

Some additional USB mouse devices are needing ALWAYS_POLL quirk without which they disconnect and reconnect every 60s.

Add below devices to the known quirk list.
CHERRY VID 0x046a, PID 0x000c
MICROSOFT VID 0x045e, PID 0x0783
PRIMAX VID 0x0461, PID 0x4e2a

---
 drivers/hid/hid-ids.h    | 3 +++
 drivers/hid/hid-quirks.c | 3 +++
 2 files changed, 6 insertions(+)
drivers/hid/hid-ids.h +3 -0
index 8d11356df98a..6d550681869f 100644
@@ -259,6 +259,7 @@
 #define USB_DEVICE_ID_CH_AXIS_295	0x001c
 
 #define USB_VENDOR_ID_CHERRY		0x046a
+#define USB_DEVICE_ID_CHERRY_MOUSE_000C	0x000c
 #define USB_DEVICE_ID_CHERRY_CYMOTION	0x0023
 #define USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR	0x0027
 
@@ -864,6 +865,7 @@
 #define USB_DEVICE_ID_MS_XBOX_ONE_S_CONTROLLER	0x02fd
 #define USB_DEVICE_ID_MS_PIXART_MOUSE    0x00cb
 #define USB_DEVICE_ID_8BITDO_SN30_PRO_PLUS      0x02e0
+#define USB_DEVICE_ID_MS_MOUSE_0783      0x0783
 
 #define USB_VENDOR_ID_MOJO		0x8282
 #define USB_DEVICE_ID_RETRO_ADAPTER	0x3201
@@ -1294,6 +1296,7 @@
 
 #define USB_VENDOR_ID_PRIMAX	0x0461
 #define USB_DEVICE_ID_PRIMAX_MOUSE_4D22	0x4d22
+#define USB_DEVICE_ID_PRIMAX_MOUSE_4E2A	0x4e2a
 #define USB_DEVICE_ID_PRIMAX_KEYBOARD	0x4e05
 #define USB_DEVICE_ID_PRIMAX_REZEL	0x4e72
 #define USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4D0F	0x4d0f
drivers/hid/hid-quirks.c +3 -0
index 89e236b71ddf..baad65fcdff7 100644
@@ -54,6 +54,7 @@ static const struct hid_device_id hid_quirks[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE), HID_QUIRK_NOGET },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_PRO_PEDALS), HID_QUIRK_NOGET },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_PRO_THROTTLE), HID_QUIRK_NOGET },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_MOUSE_000C), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_DEVICE_ID_CORSAIR_K65RGB), HID_QUIRK_NO_INIT_REPORTS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_DEVICE_ID_CORSAIR_K65RGB_RAPIDFIRE), HID_QUIRK_NO_INIT_REPORTS | HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_DEVICE_ID_CORSAIR_K70RGB), HID_QUIRK_NO_INIT_REPORTS },
@@ -122,6 +123,7 @@ static const struct hid_device_id hid_quirks[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOUSE_C05A), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOUSE_C06A), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MCS, USB_DEVICE_ID_MCS_GAMEPADBLOCK), HID_QUIRK_MULTI_INPUT },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_MOUSE_0783), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PIXART_MOUSE), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER), HID_QUIRK_NO_INIT_REPORTS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_SURFACE3_COVER), HID_QUIRK_NO_INIT_REPORTS },
@@ -146,6 +148,7 @@ static const struct hid_device_id hid_quirks[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN), HID_QUIRK_NO_INIT_REPORTS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_USB_OPTICAL_MOUSE), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_MOUSE_4D22), HID_QUIRK_ALWAYS_POLL },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_MOUSE_4E2A), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4D0F), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4D65), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4E22), HID_QUIRK_ALWAYS_POLL },
Signature · 1 line
2.35.1
author maintainer
#5 lore raw

PATCH 6/7 Bluetooth: L2CAP: Fix u8 overflow

In reply to Sasha Levin

From: Sungwoo Kim <[email protected]>

[ Upstream commit bcd70260ef56e0aee8a4fc6cd214a419900b0765 ]

By keep sending L2CAP_CONF_REQ packets, chan->num_conf_rsp increases multiple times and eventually it will wrap around the maximum number (i.e., 255).
This patch prevents this by adding a boundary check with L2CAP_MAX_CONF_RSP

Btmon log:
Bluetooth monitor ver 5.64
= Note: Linux version 6.1.0-rc2 (x86_64) 0.264594
= Note: Bluetooth subsystem version 2.22 0.264636
@ MGMT Open: btmon (privileged) version 1.22 {0x0001} 0.272191
= New Index: 00:00:00:00:00:00 (Primary,Virtual,hci0) [hci0] 13.877604
@ RAW Open: 9496 (privileged) version 2.22 {0x0002} 13.890741
= Open Index: 00:00:00:00:00:00 [hci0] 13.900426
(...)

Quoted 1 line

ACL Data RX: Handle 200 flags 0x00 dlen 1033 #32 [hci0] 14.273106

        invalid packet size (12 != 1033)
        08 00 01 00 02 01 04 00 01 10 ff ff              ............
Quoted 1 line

ACL Data RX: Handle 200 flags 0x00 dlen 1547 #33 [hci0] 14.273561

        invalid packet size (14 != 1547)
        0a 00 01 00 04 01 06 00 40 00 00 00 00 00        ........@.....
Quoted 1 line

ACL Data RX: Handle 200 flags 0x00 dlen 2061 #34 [hci0] 14.274390

        invalid packet size (16 != 2061)
        0c 00 01 00 04 01 08 00 40 00 00 00 00 00 00 04  ........@.......
Quoted 1 line

ACL Data RX: Handle 200 flags 0x00 dlen 2061 #35 [hci0] 14.274932

        invalid packet size (16 != 2061)
        0c 00 01 00 04 01 08 00 40 00 00 00 07 00 03 00  ........@.......

= bluetoothd: Bluetooth daemon 5.43 14.401828

Quoted 1 line

ACL Data RX: Handle 200 flags 0x00 dlen 1033 #36 [hci0] 14.275753

        invalid packet size (12 != 1033)
        08 00 01 00 04 01 04 00 40 00 00 00              ........@...
---
 net/bluetooth/l2cap_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/bluetooth/l2cap_core.c +2 -1
index fb2abd0e979a..0e51ed3412ef 100644
@@ -4210,7 +4210,8 @@ static inline int l2cap_config_req(struct l2cap_conn *conn,
 
 	chan->ident = cmd->ident;
 	l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP, len, rsp);
-	chan->num_conf_rsp++;
+	if (chan->num_conf_rsp < L2CAP_CONF_MAX_CONF_RSP)
+		chan->num_conf_rsp++;
 
 	/* Reset config buffer. */
 	chan->conf_len = 0;
Signature · 1 line
2.35.1
author maintainer
#6 lore raw

PATCH 7/7 net: loopback: use NET_NAME_PREDICTABLE for name_assign_type

In reply to Sasha Levin

From: Rasmus Villemoes <[email protected]>

[ Upstream commit 31d929de5a112ee1b977a89c57de74710894bbbf ]

When the name_assign_type attribute was introduced (commit 685343fc3ba6, "net: add name_assign_type netdev attribute"), the loopback device was explicitly mentioned as one which would make use of NET_NAME_PREDICTABLE:

The name_assign_type attribute gives hints where the interface name of a given net-device comes from. These values are currently defined:
...
NET_NAME_PREDICTABLE:
The ifname has been assigned by the kernel in a predictable way that is guaranteed to avoid reuse and always be the same for a given device. Examples include statically created devices like the loopback device [...]

Switch to that so that reading /sys/class/net/lo/name_assign_type produces something sensible instead of returning -EINVAL.

---
 drivers/net/loopback.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/loopback.c +1 -1
index 14545a8797a8..7788f72c262e 100644
@@ -206,7 +206,7 @@ static __net_init int loopback_net_init(struct net *net)
 	int err;
 
 	err = -ENOMEM;
-	dev = alloc_netdev(0, "lo", NET_NAME_UNKNOWN, loopback_setup);
+	dev = alloc_netdev(0, "lo", NET_NAME_PREDICTABLE, loopback_setup);
 	if (!dev)
 		goto out;
 
Signature · 1 line
2.35.1