arm64: dts: rockchip: rk3399: use correct reset names
Subsystems (2)
PATCH 1/1 arm64: dts: rockchip: rk3399: use correct reset names
The reset names does not follow the binding, use the correct ones.
Fixes 8c701fa6e38c ("arm64: dts: rockchip: rk3399: add crypto node")
Signed-off-by Corentin Labbe <[email protected]>
--- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/rockchip/rk3399.dtsi +2 -2
@@ -589,7 +589,7 @@ crypto0: crypto@ff8b0000 { clocks = <&cru HCLK_M_CRYPTO0>, <&cru HCLK_S_CRYPTO0>, <&cru SCLK_CRYPTO0>; clock-names = "hclk_master", "hclk_slave", "sclk"; resets = <&cru SRST_CRYPTO0>, <&cru SRST_CRYPTO0_S>, <&cru SRST_CRYPTO0_M>; - reset-names = "master", "lave", "crypto"; + reset-names = "master", "slave", "crypto-rst"; }; crypto1: crypto@ff8b8000 {
@@ -599,7 +599,7 @@ crypto1: crypto@ff8b8000 { clocks = <&cru HCLK_M_CRYPTO1>, <&cru HCLK_S_CRYPTO1>, <&cru SCLK_CRYPTO1>; clock-names = "hclk_master", "hclk_slave", "sclk"; resets = <&cru SRST_CRYPTO1>, <&cru SRST_CRYPTO1_S>, <&cru SRST_CRYPTO1_M>; - reset-names = "master", "slave", "crypto"; + reset-names = "master", "slave", "crypto-rst"; }; i2c1: i2c@ff110000 {
Signature · 1 line
2.37.4
Quoted 3 lines · Corentin Labbe
The reset names does not follow the binding, use the correct ones.
Applied as fix for 6.2, thanks!
[1/1] arm64: dts: rockchip: rk3399: use correct reset names
commit: 53e8e1e6e9c1653095211a8edf17912f2374bb03
Best regards,
Signature · 6 lines
Heiko Stuebner <[email protected]> _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip