Skip to contentSkip to conversation

Add support for BSH smm s2 [pro] boards

PATCH Superseded Dario Binacchi 1 participant 3 messages Dec 13, 2022 Arm i.MX and Layerscape

v8 of 9 Superseded Latest is v9 →

lore
Share & tools
lore
#0 lore raw

v8 cover Add support for BSH smm s2 [pro] boards

The series adds support to BSH smm s2 [pro] boards.

Changes in v8:
- Rebase on master and fix conflicts on DEVELOPERS file.
- Set BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y,

Changes in v7:
- Add Giulio Benetti Reviewed-by tag.
- Add Heiko Thiery Reviewed-by tag.

Changes in v6:
- Change offset in imx-boot partition of genimage.cfg from 33k to 32k.

Changes in v5:
- Update the commit description.
- Bump the kernel version to 5.19.7.
- Remove the 0003-Revert-Revert-mtd-rawnand-gpmi-Fix-setting-busy-time.patch patch.
- Regenerate all added patches (Linux kernel and U-boot) so that they contain the [PATCH] header without numbering.
- Add patchwork link to U-boot patch.

Changes in v4:
- Update the commit description.
- Bump the kernel version to 5.18.19.
- Shrink the Linux configuration.
- Add 3 dashes to the kernel patches to avoid having the version history to fall into the final commit log.
- Add lore.kernel.org links to the submitted patches.
- Apply the 0003-Revert-Revert-mtd-rawnand-gpmi-Fix-setting-busy-time.patch to the kernel.

Changes in v3:
- Update the commit description.
- Bump U-Boot to version 2022-07.
- Remove U-Boot patches merged in version 2022-07.
- Update the Linux patches.

Changes in v2:
- Drop the patch that added the 'uuu' package. It has been merged.
- Patch 1/2: "configs/imx8mn_bsh_smm_s2_defconfig: new defconfig":
- Change commit subject and description.
- Update linux patch to version 4. It hasn't been merged yet but has been reviewed. This is the most up-to-date version.
- Replace Co-developed-by:' tag with Co-authored-by'.
- Use the buildroot's output directory if the binaries directory is not passed as a parameter to the `flash.sh' script.
- Replace the linux.config file with an architectural defconfig and a config fragment for the changes.
- Remove useless and deprecated statements in nand-full.lst.
- Remove the buildroot configurations for ext2/ext4 filesystem creation.
- Patch 2/2: "configs/imx8mn_bsh_smm_s2_pro_defconfig: new defconfig":
- Change commit subject line.
- Use the buildroot's output directory if the binaries directory is not passed as a parameter to the `flash.sh' script.
- Replace the linux.config file with an architectural defconfig and a config fragment for the changes.

Dario Binacchi (1):
configs/imx8mn_bsh_smm_s2_defconfig: new defconfig

Michael Trimarchi (1):
configs/imx8mn_bsh_smm_s2_pro_defconfig: new defconfig

 DEVELOPERS                                    |   8 +
 .../common/imx8mn-bsh-smm-s2/linux.fragment   | 895 ++++++++++++++++++
 board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf |   4 +
 board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh      |  23 +
 board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg  |  17 +
 board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh |   7 +
 board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh |   3 +
 board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt    |  73 ++
 board/bsh/imx8mn-bsh-smm-s2/flash.sh          |  26 +
 board/bsh/imx8mn-bsh-smm-s2/nand-full.lst     |  29 +
 ...ine-mxs-use-platform_driver_register.patch |  45 +
 ...2-dmaengine-mxs-fix-section-mismatch.patch |  39 +
 ...Remove-rootwait-1-to-all-the-affecte.patch | 160 ++++
 board/bsh/imx8mn-bsh-smm-s2/post-build.sh     |   4 +
 board/bsh/imx8mn-bsh-smm-s2/readme.txt        |  75 ++
 configs/imx8mn_bsh_smm_s2_defconfig           |  41 +
 configs/imx8mn_bsh_smm_s2_pro_defconfig       |  42 +
 17 files changed, 1491 insertions(+)
 create mode 100644 board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment
 create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf
 create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh
 create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg
 create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh
 create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh
 create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt
 create mode 100755 board/bsh/imx8mn-bsh-smm-s2/flash.sh
 create mode 100644 board/bsh/imx8mn-bsh-smm-s2/nand-full.lst
 create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch
 create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch
 create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch
 create mode 100755 board/bsh/imx8mn-bsh-smm-s2/post-build.sh
 create mode 100644 board/bsh/imx8mn-bsh-smm-s2/readme.txt
 create mode 100644 configs/imx8mn_bsh_smm_s2_defconfig
 create mode 100644 configs/imx8mn_bsh_smm_s2_pro_defconfig
Signature · 6 lines
2.32.0

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#1 lore raw

PATCH v8 1/2 configs/imx8mn_bsh_smm_s2_defconfig: new defconfig

BSH SMM S2 (SystemMaster S2) Board is an add-on board which provide input and output interfaces to a dedicated carrier board. It is designed mainly to provide graphical/video and connectivity interfaces to the appliance.

Board support package includes the following components:
- mainline Linux kernel 5.19.7
- mainline U-Boot 2022-07
- default packages from buildroot

Patches applied to the Linux kernel and U-Boot have been submitted but not merged yet.

https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/
The smm s2 board is basically the same as the pro except it boots from NAND instead of eMMC.

---
Changes in v8:
- Rebase on master and fix conflicts on DEVELOPERS file.
- Set BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y,

Changes in v7:
- Add Giulio Benetti Reviewed-by tag.

(no changes since v5)

Changes in v5:
- Update the commit description.
- Bump the kernel version to 5.19.7.
- Remove the 0003-Revert-Revert-mtd-rawnand-gpmi-Fix-setting-busy-time.patch patch.
- Regenerate all added patches (Linux kernel and U-boot) so that they contain the [PATCH] header without numbering.
- Add patchwork link to U-boot patch.

Changes in v4:
- Update the commit description.
- Bump the kernel version to 5.18.19.
- Shrink the Linux configuration.
- Add 3 dashes to the kernel patches to avoid having the version history to fall into the final commit log.
- Add lore.kernel.org links to the submitted patches.
- Apply the 0003-Revert-Revert-mtd-rawnand-gpmi-Fix-setting-busy-time.patch to the kernel.

Changes in v3:
- Update the commit description.
- Bump U-Boot to version 2022-07.
- Remove U-Boot patches merged in version 2022-07.
- Update the Linux patches.

Changes in v2:
- Change commit subject and description.
- Update linux patch to version 4. It hasn't been merged yet but has been reviewed. This is the most up-to-date version.
- Replace Co-developed-by:' tag with Co-authored-by'.
- Use the buildroot's output directory if the binaries directory is not passed as a parameter to the `flash.sh' script.
- Replace the linux.config file with an architectural defconfig and a config fragment for the changes.
- Remove useless and deprecated statements in nand-full.lst.
- Remove the buildroot configurations for ext2/ext4 filesystem creation.

 DEVELOPERS                                    |   4 +
 board/bsh/imx8mn-bsh-smm-s2/flash.sh          |  26 +
 board/bsh/imx8mn-bsh-smm-s2/linux.fragment    | 895 ++++++++++++++++++
 board/bsh/imx8mn-bsh-smm-s2/nand-full.lst     |  29 +
 ...ine-mxs-use-platform_driver_register.patch |  45 +
 ...2-dmaengine-mxs-fix-section-mismatch.patch |  39 +
 ...Remove-rootwait-1-to-all-the-affecte.patch | 160 ++++
 board/bsh/imx8mn-bsh-smm-s2/post-build.sh     |   4 +
 board/bsh/imx8mn-bsh-smm-s2/readme.txt        |  75 ++
 configs/imx8mn_bsh_smm_s2_defconfig           |  41 +
 10 files changed, 1318 insertions(+)
 create mode 100755 board/bsh/imx8mn-bsh-smm-s2/flash.sh
 create mode 100644 board/bsh/imx8mn-bsh-smm-s2/linux.fragment
 create mode 100644 board/bsh/imx8mn-bsh-smm-s2/nand-full.lst
 create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch
 create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch
 create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch
 create mode 100755 board/bsh/imx8mn-bsh-smm-s2/post-build.sh
 create mode 100644 board/bsh/imx8mn-bsh-smm-s2/readme.txt
 create mode 100644 configs/imx8mn_bsh_smm_s2_defconfig
DEVELOPERS +4 -0
index f0dcc42de78b..c51141b265b7 100644
@@ -689,6 +689,8 @@ F:	package/luaexpat/
 F:	package/xinetd/
 
 N:	Dario Binacchi <[email protected]>
+F:	board/bsh/
+F:	configs/imx8mn_bsh_smm_s2_defconfig
 F:	package/sscep/
 F:	package/uuu/
 
@@ -2108,6 +2110,8 @@ F:	package/python-crc16/
 F:	package/python-pyzmq/
 
 N:	Michael Trimarchi <[email protected]>
+F:	board/bsh/
+F:	configs/imx8mn_bsh_smm_s2_defconfig
 F:	package/python-spidev/
 
 N:	Michael Vetter <[email protected]>
board/bsh/imx8mn-bsh-smm-s2/flash.sh new file +26 -0
new file mode 100755
index 000000000000..1f343d516dcf
@@ -0,0 +1,26 @@
+#!/bin/bash
+
+if [ $# -eq 0 ]; then
+    OUTPUT_DIR=output
+else
+    OUTPUT_DIR=$1
+fi
+
+if ! test -d "${OUTPUT_DIR}" ; then
+    echo "ERROR: no output directory specified."
+    echo "Usage: $0 OUTPUT_DIR"
+    echo ""
+    echo "Arguments:"
+    echo "    OUTPUT_DIR    The Buildroot output directory."
+    exit 1
+fi
+
+IMAGES_DIR=${OUTPUT_DIR}/images
+
+${OUTPUT_DIR}/host/bin/uuu -v -b ${IMAGES_DIR}/nand-full.lst \
+  ${IMAGES_DIR}/flash.bin \
+  ${IMAGES_DIR}/flash.bin \
+  ${IMAGES_DIR}/rootfs.ubifs \
+  ${IMAGES_DIR}/Image \
+  ${IMAGES_DIR}/freescale/imx8mn-bsh-smm-s2.dtb
+
board/bsh/imx8mn-bsh-smm-s2/linux.fragment new file +895 -0

895 lines not on this page · raw message

board/bsh/imx8mn-bsh-smm-s2/nand-full.lst new file +29 -0
new file mode 100644
index 000000000000..c01d2d6c1dac
@@ -0,0 +1,29 @@
+# @_flash.bin            | bootloader
+# @_image   [_flash.bin] | image burn to nand, default is the same as bootloader
+# @_filesystem           | filesystem to burn
+# @_kernel               | kernel image
+# @_dtb                  | dtb image
+
+# This command will be run when ROM support stream mode
+# i.MX8QXP, i.MX8QM
+SDPS: boot -f _flash.bin
+
+FB: ucmd setenv fastboot_buffer ${loadaddr}
+FB: download -f _image
+# Burn image to nandfit partition if needed
+FB: ucmd if env exists nandfit_part; then nand erase.part nandfit; nand write ${fastboot_buffer} nandfit ${filesize}; else true; fi;
+FB: ucmd nandbcb init ${fastboot_buffer} nandboot ${filesize}
+
+FB[-t 10000]: ucmd ubi part nandrootfs
+FB[-t 10000]: ucmd ubi create root -
+FB: download -f _filesystem
+FB[-t 60000]: ucmd ubi write ${loadaddr} root ${filesize}
+
+FB: download -f _kernel
+FB[-t 10000]: ucmd nand write ${loadaddr} nandkernel ${filesize}
+
+FB: download -f _dtb
+FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize}
+
+FB: reboot
+FB: done
board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch new file +45 -0

45 lines not on this page · raw message

board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch new file +39 -0
new file mode 100644
index 000000000000..faf3b7290e68
@@ -0,0 +1,39 @@
+From 1322ec115e91419a8f7b7d6d5e36e68316908b5a Mon Sep 17 00:00:00 2001
+From: Dario Binacchi <[email protected]>
+Date: Tue, 12 Jul 2022 15:15:19 +0200
+Subject: [PATCH] dmaengine: mxs: fix section mismatch
+
+The patch was suggested by the following modpost warning:
+
+WARNING: modpost: vmlinux.o(.data+0xa3900): Section mismatch in reference from the variable mxs_dma_driver to the function .init.text:mxs_dma_probe()
+The variable mxs_dma_driver references
+the function __init mxs_dma_probe()
+If the reference is valid then annotate the
+variable with __init* or __refdata (see linux/init.h) or name the variable:
+*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
+
+Co-developed-by: Michael Trimarchi <[email protected]>
+Signed-off-by: Michael Trimarchi <[email protected]>
+Signed-off-by: Dario Binacchi <[email protected]>
+Cc: [email protected]
+Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/
+---
+ drivers/dma/mxs-dma.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
+index 18f8154b859b..a01953e06048 100644
+--- a/drivers/dma/mxs-dma.c
++++ b/drivers/dma/mxs-dma.c
+@@ -834,7 +834,7 @@ static int __init mxs_dma_probe(struct platform_device *pdev)
+ 	return 0;
+ }
+ 
+-static struct platform_driver mxs_dma_driver = {
++static struct platform_driver mxs_dma_driver __initdata = {
+ 	.driver		= {
+ 		.name	= "mxs-dma",
+ 		.of_match_table = mxs_dma_dt_ids,
+-- 
+2.32.0
+
board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch new file +160 -0

160 lines not on this page · raw message

board/bsh/imx8mn-bsh-smm-s2/post-build.sh new file +4 -0
new file mode 100755
index 000000000000..49df4cd6fb10
@@ -0,0 +1,4 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+
+cp ${BOARD_DIR}/nand-full.lst ${BINARIES_DIR}
board/bsh/imx8mn-bsh-smm-s2/readme.txt new file +75 -0

75 lines not on this page · raw message

configs/imx8mn_bsh_smm_s2_defconfig new file +41 -0

41 lines not on this page · raw message

Signature · 6 lines
2.32.0

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#2 lore raw

PATCH v8 2/2 configs/imx8mn_bsh_smm_s2_pro_defconfig: new defconfig

In reply to Dario Binacchi

From: Michael Trimarchi <[email protected]>

BSH SMM S2 PRO (SystemMaster S2 Pro) Board is an add-on board which provide input and output interfaces to a dedicated carrier board. It is designed mainly to provide graphical/video and connectivity interfaces to the appliance.

Board support package includes the following components:
- mainline Linux kernel 5.19.7
- mainline U-Boot 2022-07
- Default packages from buildroot

https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/

Add Ariel D'Alessandro and Dario Binacchi as co-maintainer, we work together on platform mainline

Build and tested using:
docker pull registry.gitlab.com/buildroot.org/buildroot/base:20220105.2314

---
Changes in v8:
- Rebase on master and fix conflicts on DEVELOPERS file.
- Set BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_19=y,

Changes in v7:
- Add Heiko Thiery Reviewed-by tag.

Changes in v6:
- Change offset in imx-boot partition of genimage.cfg from 33k to 32k.

Changes in v5:
- Update the commit description.
- Bump the kernel version to 5.19.7.

Changes in v4:
- Update the commit description.
- Bump the kernel version to 5.18.19.

Changes in v3:
- Update the commit description.
- Bump U-Boot to version 2022-07.

Changes in v2:
- Change commit subject line.
- Use the buildroot's output directory if the binaries directory is not passed as a parameter to the `flash.sh' script.
- Replace the linux.config file with an architectural defconfig and a config fragment for the changes.

 DEVELOPERS                                    |  4 +
 .../imx8mn-bsh-smm-s2/linux.fragment          |  0
 board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf |  4 +
 board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh      | 23 ++++++
 board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg  | 17 +++++
 board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh |  7 ++
 board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh |  3 +
 board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt    | 73 +++++++++++++++++++
 configs/imx8mn_bsh_smm_s2_defconfig           |  2 +-
 configs/imx8mn_bsh_smm_s2_pro_defconfig       | 42 +++++++++++
 10 files changed, 174 insertions(+), 1 deletion(-)
 rename board/bsh/{ => common}/imx8mn-bsh-smm-s2/linux.fragment (100%)
 create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf
 create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh
 create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg
 create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh
 create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh
 create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt
 create mode 100644 configs/imx8mn_bsh_smm_s2_pro_defconfig
DEVELOPERS +4 -0
index c51141b265b7..9d9faa1a5346 100644
@@ -221,6 +221,8 @@ F:	configs/snps_archs38_haps_defconfig
 F:	configs/snps_archs38_hsdk_defconfig
 
 N:	Ariel D'Alessandro <[email protected]>
+F:	board/bsh/
+F:	configs/imx8mn_bsh_smm_s2_pro_defconfig
 F:	package/axfsutils/
 F:	package/mali-t76x/
 
@@ -691,6 +693,7 @@ F:	package/xinetd/
 N:	Dario Binacchi <[email protected]>
 F:	board/bsh/
 F:	configs/imx8mn_bsh_smm_s2_defconfig
+F:	configs/imx8mn_bsh_smm_s2_pro_defconfig
 F:	package/sscep/
 F:	package/uuu/
 
@@ -2112,6 +2115,7 @@ F:	package/python-pyzmq/
 N:	Michael Trimarchi <[email protected]>
 F:	board/bsh/
 F:	configs/imx8mn_bsh_smm_s2_defconfig
+F:	configs/imx8mn_bsh_smm_s2_pro_defconfig
 F:	package/python-spidev/
 
 N:	Michael Vetter <[email protected]>
board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment renamed from board/bsh/imx8mn-bsh-smm-s2/linux.fragment +0 -0
similarity index 100%
rename from board/bsh/imx8mn-bsh-smm-s2/linux.fragment
rename to board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment
board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf new file +4 -0
new file mode 100644
index 000000000000..911135474253
@@ -0,0 +1,4 @@
+label buildroot
+  kernel /boot/Image
+  devicetree /boot/freescale/imx8mn-bsh-smm-s2pro.dtb
+  append root=PARTUUID=%PARTUUID% rootwait rw
board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh new file +23 -0
new file mode 100755
index 000000000000..17b20f009771
@@ -0,0 +1,23 @@
+#!/bin/bash
+
+if [ $# -eq 0 ]; then
+    OUTPUT_DIR=output
+else
+    OUTPUT_DIR=$1
+fi
+
+if ! test -d "${OUTPUT_DIR}" ; then
+    echo "ERROR: no output directory specified."
+    echo "Usage: $0 OUTPUT_DIR"
+    echo ""
+    echo "Arguments:"
+    echo "    OUTPUT_DIR    The Buildroot output directory."
+    exit 1
+fi
+
+IMAGES_DIR=${OUTPUT_DIR}/images
+
+${OUTPUT_DIR}/host/bin/uuu -v -b emmc_all \
+  ${IMAGES_DIR}/flash.bin \
+  ${IMAGES_DIR}/sdcard.img
+
board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg new file +17 -0
new file mode 100644
index 000000000000..10c52548cdfa
@@ -0,0 +1,17 @@
+image sdcard.img {
+	hdimage {
+		partition-table-type = "gpt"
+	}
+
+	partition imx-boot {
+		in-partition-table = "no"
+		image = "flash.bin"
+		offset = 32K
+	}
+
+	partition rootfs {
+		offset = 8M
+		image = "rootfs.ext4"
+		partition-uuid = %PARTUUID%
+	}
+}
board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh new file +7 -0
new file mode 100755
index 000000000000..bf8861f6a914
@@ -0,0 +1,7 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+PARTUUID="$($HOST_DIR/bin/uuidgen)"
+
+install -d "$TARGET_DIR/boot/extlinux/"
+sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/extlinux.conf" > "$TARGET_DIR/boot/extlinux/extlinux.conf"
+sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/genimage.cfg" > "$BINARIES_DIR/genimage.cfg"
board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh new file +3 -0
new file mode 100755
index 000000000000..3452fd4501f8
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+support/scripts/genimage.sh -c ${BINARIES_DIR}/genimage.cfg
board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt new file +73 -0

73 lines not on this page · raw message

configs/imx8mn_bsh_smm_s2_defconfig +1 -1
index 43bae6de6cad..f5724bd26db7 100644
@@ -7,7 +7,7 @@ BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.19.7"
 BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/imx8mn-bsh-smm-s2/linux.fragment"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2"
 BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y
configs/imx8mn_bsh_smm_s2_pro_defconfig new file +42 -0

42 lines not on this page · raw message

Signature · 6 lines
2.32.0

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot