Skip to contentSkip to conversation

Revert "cmd: pxe_utils: Check fdtcontroladdr in label_boot"

PATCH In review Tom Rini 3 participants 4 messages Dec 13, 2022 Network drivers

lore
Share & tools
lore

Tom Rini

author
#0 lore raw

PATCH 1/1 Revert "cmd: pxe_utils: Check fdtcontroladdr in label_boot"

With the change here, all extlinux.conf files with only "KERNEL /fitImage" don't work anymore. One common example of this would be those files generated by thee Poky/OE WIC bootimg-partition bootloader partition generator.

This reverts commit d5ba6188dfbf6bb68354bec86e483623f1f6dae2.

---
 boot/pxe_utils.c   | 8 +-------
 drivers/net/tsec.c | 2 +-
 2 files changed, 2 insertions(+), 8 deletions(-)
boot/pxe_utils.c +1 -7
index 8133006875f9..96528aa14c03 100644
@@ -616,10 +616,7 @@ static int label_boot(struct pxe_context *ctx, struct pxe_label *label)
 	 * Scenario 2: If there is an fdt_addr specified, pass it along to
 	 * bootm, and adjust argc appropriately.
 	 *
-	 * Scenario 3: If there is an fdtcontroladdr specified, pass it along to
-	 * bootm, and adjust argc appropriately.
-	 *
-	 * Scenario 4: fdt blob is not available.
+	 * Scenario 3: fdt blob is not available.
 	 */
 	bootm_argv[3] = env_get("fdt_addr_r");
 
@@ -724,9 +721,6 @@ static int label_boot(struct pxe_context *ctx, struct pxe_label *label)
 	if (!bootm_argv[3])
 		bootm_argv[3] = env_get("fdt_addr");
 
-	if (!bootm_argv[3])
-		bootm_argv[3] = env_get("fdtcontroladdr");
-
 	if (bootm_argv[3]) {
 		if (!bootm_argv[2])
 			bootm_argv[2] = "-";
drivers/net/tsec.c +1 -1
index d69a9ff47736..519ea14b070e 100644
@@ -156,7 +156,7 @@ static int tsec_mcast_addr(struct udevice *dev, const u8 *mcast_mac, int join)
 	return 0;
 }
 
-static int __maybe_unused tsec_set_promisc(struct udevice *dev, bool enable)
+static int tsec_set_promisc(struct udevice *dev, bool enable)
 {
 	struct tsec_private *priv = dev_get_priv(dev);
 	struct tsec __iomem *regs = priv->regs;
Signature · 1 line
2.25.1
#1 lore raw

Hi Tom,

Quoted 7 lines · Tom Rini

With the change here, all extlinux.conf files with only "KERNEL /fitImage" don't work anymore. One common example of this would be those files generated by thee Poky/OE WIC bootimg-partition bootloader partition generator.

This reverts commit d5ba6188dfbf6bb68354bec86e483623f1f6dae2.

FYI, this patch has been in U-Boot for three releases already, hence why I was reluctant to ask for a revert when I discovered the issue (that Neil already had reported in August, well before me).

Adding people who worked on the reverted patch in Cc so they can give their 2¢ on it.

Cheers,
Quentin

Quoted 47 lines
---
  boot/pxe_utils.c   | 8 +-------
  drivers/net/tsec.c | 2 +-
  2 files changed, 2 insertions(+), 8 deletions(-)
boot/pxe_utils.c +1 -7
index 8133006875f9..96528aa14c03 100644
@@ -616,10 +616,7 @@ static int label_boot(struct pxe_context *ctx, struct pxe_label *label)
  	 * Scenario 2: If there is an fdt_addr specified, pass it along to
  	 * bootm, and adjust argc appropriately.
  	 *
-	 * Scenario 3: If there is an fdtcontroladdr specified, pass it along to
-	 * bootm, and adjust argc appropriately.
-	 *
-	 * Scenario 4: fdt blob is not available.
+	 * Scenario 3: fdt blob is not available.
  	 */
  	bootm_argv[3] = env_get("fdt_addr_r");
 
@@ -724,9 +721,6 @@ static int label_boot(struct pxe_context *ctx, struct pxe_label *label)
  	if (!bootm_argv[3])
  		bootm_argv[3] = env_get("fdt_addr");
 
-	if (!bootm_argv[3])
-		bootm_argv[3] = env_get("fdtcontroladdr");
-
  	if (bootm_argv[3]) {
  		if (!bootm_argv[2])
  			bootm_argv[2] = "-";
drivers/net/tsec.c +1 -1
index d69a9ff47736..519ea14b070e 100644
@@ -156,7 +156,7 @@ static int tsec_mcast_addr(struct udevice *dev, const u8 *mcast_mac, int join)
  	return 0;
  }
 
-static int __maybe_unused tsec_set_promisc(struct udevice *dev, bool enable)
+static int tsec_set_promisc(struct udevice *dev, bool enable)
  {
  	struct tsec_private *priv = dev_get_priv(dev);
  	struct tsec __iomem *regs = priv->regs;
author
#2 lore raw
Quoted 11 lines · Quentin Schulz

Hi Tom,

Quoted 7 lines · Tom Rini

With the change here, all extlinux.conf files with only "KERNEL /fitImage" don't work anymore. One common example of this would be those files generated by thee Poky/OE WIC bootimg-partition bootloader partition generator.

This reverts commit d5ba6188dfbf6bb68354bec86e483623f1f6dae2.

Quoted 6 lines

FYI, this patch has been in U-Boot for three releases already, hence why I was reluctant to ask for a revert when I discovered the issue (that Neil already had reported in August, well before me).

Adding people who worked on the reverted patch in Cc so they can give their 2¢ on it.

Sigh, I misreaad what git describe showed me as 202_3_.01 not 202_2_.01.

Signature · 1 line
Tom
#3 lore raw
In reply to Quentin Schulz
Quoted 8 lines · Quentin Schulz

Hi Tom,

Quoted 5 lines · Tom Rini

With the change here, all extlinux.conf files with only "KERNEL /fitImage" don't work anymore. One common example of this would be those files generated by thee Poky/OE WIC bootimg-partition bootloader partition generator.

Quoted 6 lines
Quoted 2 lines

This reverts commit d5ba6188dfbf6bb68354bec86e483623f1f6dae2.

FYI, this patch has been in U-Boot for three releases already, hence why I was reluctant to ask for a revert when I discovered the issue (that Neil already had reported in August, well before me).

Adding people who worked on the reverted patch in Cc so they can give their 2¢ on it.

Sending a quick reply (as the original author of this patch) as I likely won't have bandwidth to investigate this properly until 2023.

The use case here (PXE with fdtcontroladdr) is still occasionally useful for us as we don't use FIT images but instead bundle U-Boot and the device tree in a prior boot stage, typically Trusted Firmware-A. As PXE is not regularly used in our team though, I think we'd be open to this revert in the short term so long as we can agree on a better design to be implemented in the medium term.

We are also active Poky/OE users here, but I think this more about supporting different options for device tree storage.

Peter

Quoted 51 lines

Cheers,
Quentin

Quoted 47 lines

---
  boot/pxe_utils.c   | 8 +-------
  drivers/net/tsec.c | 2 +-

  2 files changed, 2 insertions(+), 8 deletions(-)
boot/pxe_utils.c +0 -1
index 8133006875f9..96528aa14c03 100644
@@ -616,10 +616,7 @@ static int label_boot(struct pxe_context *ctx, 
 struct pxe_label *label)
        * Scenario 2: If there is an fdt_addr specified, pass it along to
        * bootm, and adjust argc appropriately.
        *
-     * Scenario 3: If there is an fdtcontroladdr specified, pass it 

along to
-     * bootm, and adjust argc appropriately.
-     *
-     * Scenario 4: fdt blob is not available.
+     * Scenario 3: fdt blob is not available.
       */
      bootm_argv[3] = env_get("fdt_addr_r");
  @@ -724,9 +721,6 @@ static int label_boot(struct pxe_context *ctx, struct pxe_label *label) if (!bootm_argv[3])
          bootm_argv[3] = env_get("fdt_addr");
  -    if (!bootm_argv[3])
-        bootm_argv[3] = env_get("fdtcontroladdr");
-
      if (bootm_argv[3]) {
          if (!bootm_argv[2])
              bootm_argv[2] = "-";

drivers/net/tsec.c +1 -0
index d69a9ff47736..519ea14b070e 100644
@@ -156,7 +156,7 @@ static int tsec_mcast_addr(struct udevice *dev, 
 const u8 *mcast_mac, int join)
       return 0;
   }
   -static int __maybe_unused tsec_set_promisc(struct udevice *dev, bool enable)
+static int tsec_set_promisc(struct udevice *dev, bool enable)
   {
       struct tsec_private *priv = dev_get_priv(dev);

      struct tsec __iomem *regs = priv->regs;