perf vendor events intel: Refresh elkhartlake events
Subsystems (2)
Ian Rogers
reviewerPATCH 9/32 perf vendor events intel: Refresh elkhartlake events
Update the elkhartlake events using the new tooling from:
https://github.com/intel/perfmon
The events are unchanged but unused json values are removed. This increases consistency across the json files.
--- .../arch/x86/elkhartlake/cache.json | 252 ------------------ .../arch/x86/elkhartlake/floating-point.json | 11 - .../arch/x86/elkhartlake/frontend.json | 36 --- .../arch/x86/elkhartlake/memory.json | 84 ------ .../arch/x86/elkhartlake/other.json | 143 ---------- .../arch/x86/elkhartlake/pipeline.json | 213 --------------- .../arch/x86/elkhartlake/virtual-memory.json | 117 -------- 7 files changed, 856 deletions(-)
tools/perf/pmu-events/arch/x86/elkhartlake/cache.json +0 -252
@@ -1,1137 +1,885 @@ [ { "BriefDescription": "Counts the number of core requests (demand and L1 prefetchers) rejected by the L2 queue (L2Q) due to a full condition.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x31", "EventName": "CORE_REJECT_L2Q.ANY", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of (demand and L1 prefetchers) core requests rejected by the L2 queue (L2Q) due to a full or nearly full condition, which likely indicates back pressure from L2Q. It also counts requests that would have gone directly to the External Queue (XQ), but are rejected due to a full or nearly full condition, indicating back pressure from the IDI link. The L2Q may also reject transactions from a core to ensure fairness between cores, or to delay a cores dirty eviction when the address conflicts incoming external snoops. (Note that L2 prefetcher requests that are dropped are not counted by this event). Counts on a per core basis.", "SampleAfterValue": "200003" }, { "BriefDescription": "Counts the number of L1D cacheline (dirty) evictions caused by load misses, stores, and prefetches.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x51", "EventName": "DL1.DIRTY_EVICTION", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of L1D cacheline (dirty) evictions caused by load misses, stores, and prefetches. Does not count evictions or dirty writebacks caused by snoops. Does not count a replacement unless a (dirty) line was written back.", "SampleAfterValue": "200003", "UMask": "0x1" }, { "BriefDescription": "Counts the number of demand and prefetch transactions that the External Queue (XQ) rejects due to a full or near full condition.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x30", "EventName": "L2_REJECT_XQ.ANY", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of demand and prefetch transactions that the External Queue (XQ) rejects due to a full or near full condition which likely indicates back pressure from the IDI link. The XQ may reject transactions from the L2Q (non-cacheable requests), BBL (L2 misses) and WOB (L2 write-back victims).", "SampleAfterValue": "200003" }, { "BriefDescription": "Counts the total number of L2 Cache accesses. Counts on a per core basis.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_REQUEST.ALL", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the total number of L2 Cache Accesses, includes hits, misses, rejects front door requests for CRd/DRd/RFO/ItoM/L2 Prefetches only. Counts on a per core basis.", "SampleAfterValue": "200003" }, { "BriefDescription": "Counts the number of L2 Cache accesses that resulted in a hit. Counts on a per core basis.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_REQUEST.HIT", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of L2 Cache accesses that resulted in a hit from a front door request only (does not include rejects or recycles), Counts on a per core basis.", "SampleAfterValue": "200003", "UMask": "0x2" }, { "BriefDescription": "Counts the number of L2 Cache accesses that resulted in a miss. Counts on a per core basis.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_REQUEST.MISS", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of L2 Cache accesses that resulted in a miss from a front door request only (does not include rejects or recycles). Counts on a per core basis.", "SampleAfterValue": "200003", "UMask": "0x1" }, { "BriefDescription": "Counts the number of L2 Cache accesses that miss the L2 and get rejected. Counts on a per core basis.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_REQUEST.REJECTS", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of L2 Cache accesses that miss the L2 and get BBL reject short and long rejects (includes those counted in L2_reject_XQ.any). Counts on a per core basis.", "SampleAfterValue": "200003", "UMask": "0x4" }, { "BriefDescription": "Counts the number of cacheable memory requests that miss in the LLC. Counts on a per core basis.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x2e", "EventName": "LONGEST_LAT_CACHE.MISS", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of cacheable memory requests that miss in the Last Level Cache (LLC). Requests include demand loads, reads for ownership (RFO), instruction fetches and L1 HW prefetches. If the platform has an L3 cache, the LLC is the L3 cache, otherwise it is the L2 cache. Counts on a per core basis.", "SampleAfterValue": "200003", "UMask": "0x41" }, { "BriefDescription": "Counts the number of cacheable memory requests that access the LLC. Counts on a per core basis.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x2e", "EventName": "LONGEST_LAT_CACHE.REFERENCE", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of cacheable memory requests that access the Last Level Cache (LLC). Requests include demand loads, reads for ownership (RFO), instruction fetches and L1 HW prefetches. If the platform has an L3 cache, the LLC is the L3 cache, otherwise it is the L2 cache. Counts on a per core basis.", "SampleAfterValue": "200003", "UMask": "0x4f" }, { "BriefDescription": "Counts the number of cycles the core is stalled due to an instruction cache or TLB miss which hit in the L2, LLC, DRAM or MMIO (Non-DRAM).", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x34", "EventName": "MEM_BOUND_STALLS.IFETCH", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x38" }, { "BriefDescription": "Counts the number of cycles the core is stalled due to an instruction cache or TLB miss which hit in DRAM or MMIO (Non-DRAM).", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x34", "EventName": "MEM_BOUND_STALLS.IFETCH_DRAM_HIT", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of cycles the core is stalled due to an instruction cache or translation lookaside buffer (TLB) miss which hit in DRAM or MMIO (non-DRAM).", "SampleAfterValue": "200003", "UMask": "0x20" }, { "BriefDescription": "Counts the number of cycles the core is stalled due to an instruction cache or TLB miss which hit in the L2 cache.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x34", "EventName": "MEM_BOUND_STALLS.IFETCH_L2_HIT", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of cycles the core is stalled due to an instruction cache or Translation Lookaside Buffer (TLB) miss which hit in the L2 cache.", "SampleAfterValue": "200003", "UMask": "0x8" }, { "BriefDescription": "Counts the number of cycles the core is stalled due to an instruction cache or TLB miss which hit in the LLC or other core with HITE/F/M.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x34", "EventName": "MEM_BOUND_STALLS.IFETCH_LLC_HIT", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of cycles the core is stalled due to an instruction cache or Translation Lookaside Buffer (TLB) miss which hit in the Last Level Cache (LLC) or other core with HITE/F/M.", "SampleAfterValue": "200003", "UMask": "0x10" }, { "BriefDescription": "Counts the number of cycles the core is stalled due to a demand load miss which hit in the L2, LLC, DRAM or MMIO (Non-DRAM).", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x34", "EventName": "MEM_BOUND_STALLS.LOAD", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x7" }, { "BriefDescription": "Counts the number of cycles the core is stalled due to a demand load miss which hit in DRAM or MMIO (Non-DRAM).", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x34", "EventName": "MEM_BOUND_STALLS.LOAD_DRAM_HIT", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x4" }, { "BriefDescription": "Counts the number of cycles the core is stalled due to a demand load which hit in the L2 cache.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x34", "EventName": "MEM_BOUND_STALLS.LOAD_L2_HIT", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x1" }, { "BriefDescription": "Counts the number of cycles the core is stalled due to a demand load which hit in the LLC or other core with HITE/F/M.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x34", "EventName": "MEM_BOUND_STALLS.LOAD_LLC_HIT", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of cycles the core is stalled due to a demand load which hit in the Last Level Cache (LLC) or other core with HITE/F/M.", "SampleAfterValue": "200003", "UMask": "0x2" }, { "BriefDescription": "Counts the number of cycles the core is stalled due to a store buffer being full.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x34", "EventName": "MEM_BOUND_STALLS.STORE_BUFFER_FULL", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x40" }, { "BriefDescription": "Counts the number of load uops retired that hit in DRAM.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_UOPS_RETIRED.DRAM_HIT", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x80" }, { "BriefDescription": "Counts the number of load uops retired that hit in the L3 cache, in which a snoop was required and modified data was forwarded from another core or module.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_UOPS_RETIRED.HITM", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x20" }, { "BriefDescription": "Counts the number of load uops retired that hit in the L1 data cache.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_UOPS_RETIRED.L1_HIT", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x1" }, { "BriefDescription": "Counts the number of load uops retired that miss in the L1 data cache.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_UOPS_RETIRED.L1_MISS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x8" }, { "BriefDescription": "Counts the number of load uops retired that hit in the L2 cache.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_UOPS_RETIRED.L2_HIT", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x2" }, { "BriefDescription": "Counts the number of load uops retired that miss in the L2 cache.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_UOPS_RETIRED.L2_MISS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x10" }, { "BriefDescription": "Counts the number of load uops retired that hit in the L3 cache.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_UOPS_RETIRED.L3_HIT", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x4" }, { "BriefDescription": "Counts the number of memory uops retired.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_UOPS_RETIRED.ALL", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of memory uops retired. A single uop that performs both a load AND a store will be counted as 1, not 2 (e.g. ADD [mem], CONST)", "SampleAfterValue": "200003", "UMask": "0x83" }, { "BriefDescription": "Counts the number of load uops retired.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_UOPS_RETIRED.ALL_LOADS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the total number of load uops retired.", "SampleAfterValue": "200003", "UMask": "0x81" }, { "BriefDescription": "Counts the number of store uops retired.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_UOPS_RETIRED.ALL_STORES", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the total number of store uops retired.", "SampleAfterValue": "200003", "UMask": "0x82" }, { "BriefDescription": "Counts the number of load uops retired that performed one or more locks.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_UOPS_RETIRED.LOCK_LOADS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x21" }, { "BriefDescription": "Counts the number of memory uops retired that were splits.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_UOPS_RETIRED.SPLIT", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x43" }, { "BriefDescription": "Counts the number of retired split load uops.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_UOPS_RETIRED.SPLIT_LOADS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x41" }, { "BriefDescription": "Counts the number of retired split store uops.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_UOPS_RETIRED.SPLIT_STORES", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x42" }, { "BriefDescription": "Counts all code reads that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.ALL_CODE_RD.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1F803C0044", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all code reads that were supplied by the L3 cache where a snoop was sent, the snoop hit, and modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.ALL_CODE_RD.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0044", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all code reads that were supplied by the L3 cache where a snoop was sent, the snoop hit, but no data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.ALL_CODE_RD.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0044", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all code reads that were supplied by the L3 cache where a snoop was sent, the snoop hit, and non-modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.ALL_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0044", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all code reads that were supplied by the L3 cache where a snoop was sent but the snoop missed.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.ALL_CODE_RD.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C0044", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all code reads that were supplied by the L3 cache where no snoop was needed to satisfy the request.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.ALL_CODE_RD.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0044", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts modified writebacks from L1 cache and L2 cache that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.COREWB_M.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3001F803C0000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_CODE_RD.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1F803C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that were supplied by the L3 cache where a snoop was sent, the snoop hit, and modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that were supplied by the L3 cache where a snoop was sent, the snoop hit, but no data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that were supplied by the L3 cache where a snoop was sent, the snoop hit, and non-modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that were supplied by the L3 cache where a snoop was sent but the snoop missed.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that were supplied by the L3 cache where no snoop was needed to satisfy the request.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts cacheable demand data reads, L1 data cache hardware prefetches and software prefetches (except PREFETCHW) that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_DATA_AND_L1PF_RD.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1F803C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts cacheable demand data reads, L1 data cache hardware prefetches and software prefetches (except PREFETCHW) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_DATA_AND_L1PF_RD.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts cacheable demand data reads, L1 data cache hardware prefetches and software prefetches (except PREFETCHW) that were supplied by the L3 cache where a snoop was sent, the snoop hit, but no data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_DATA_AND_L1PF_RD.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts cacheable demand data reads, L1 data cache hardware prefetches and software prefetches (except PREFETCHW) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and non-modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_DATA_AND_L1PF_RD.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts cacheable demand data reads, L1 data cache hardware prefetches and software prefetches (except PREFETCHW) that were supplied by the L3 cache where a snoop was sent but the snoop missed.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_DATA_AND_L1PF_RD.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts cacheable demand data reads, L1 data cache hardware prefetches and software prefetches (except PREFETCHW) that were supplied by the L3 cache where no snoop was needed to satisfy the request.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_DATA_AND_L1PF_RD.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_AND_L1PF_RD.L3_HIT", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_DATA_RD.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1F803C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_AND_L1PF_RD.L3_HIT.SNOOP_HITM", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_AND_L1PF_RD.L3_HIT.SNOOP_HIT_NO_FWD", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_AND_L1PF_RD.L3_HIT.SNOOP_HIT_WITH_FWD", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_AND_L1PF_RD.L3_HIT.SNOOP_MISS", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_AND_L1PF_RD.L3_HIT.SNOOP_NOT_NEEDED", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) and software prefetches for exclusive ownership (PREFETCHW) that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_RFO.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1F803C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) and software prefetches for exclusive ownership (PREFETCHW) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) and software prefetches for exclusive ownership (PREFETCHW) that were supplied by the L3 cache where a snoop was sent, the snoop hit, but no data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) and software prefetches for exclusive ownership (PREFETCHW) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and non-modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) and software prefetches for exclusive ownership (PREFETCHW) that were supplied by the L3 cache where a snoop was sent but the snoop missed.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) and software prefetches for exclusive ownership (PREFETCHW) that were supplied by the L3 cache where no snoop was needed to satisfy the request.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts streaming stores which modify a full 64 byte cacheline that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.FULL_STREAMING_WR.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x801F803C0000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L1 data cache hardware prefetches and software prefetches (except PREFETCHW and PFRFO) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L1D_AND_SWPF.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0400", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch code reads (written to the L2 cache only) that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_CODE_RD.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1F803C0040", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch code reads (written to the L2 cache only) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_CODE_RD.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0040", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch code reads (written to the L2 cache only) that were supplied by the L3 cache where a snoop was sent, the snoop hit, but no data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_CODE_RD.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0040", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch code reads (written to the L2 cache only) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and non-modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0040", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch code reads (written to the L2 cache only) that were supplied by the L3 cache where a snoop was sent but the snoop missed.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_CODE_RD.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C0040", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch code reads (written to the L2 cache only) that were supplied by the L3 cache where no snoop was needed to satisfy the request.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_CODE_RD.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0040", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch data reads (written to the L2 cache only) that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_DATA_RD.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1F803C0010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch data reads (written to the L2 cache only) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_DATA_RD.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch data reads (written to the L2 cache only) that were supplied by the L3 cache where a snoop was sent, the snoop hit, but no data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_DATA_RD.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch data reads (written to the L2 cache only) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and non-modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch data reads (written to the L2 cache only) that were supplied by the L3 cache where a snoop was sent but the snoop missed.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_DATA_RD.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C0010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch data reads (written to the L2 cache only) that were supplied by the L3 cache where no snoop was needed to satisfy the request.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_DATA_RD.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch RFOs (written to the L2 cache only) that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_RFO.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1F803C0020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch RFOs (written to the L2 cache only) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_RFO.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch RFOs (written to the L2 cache only) that were supplied by the L3 cache where a snoop was sent, the snoop hit, but no data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_RFO.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch RFOs (written to the L2 cache only) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and non-modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_RFO.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch RFOs (written to the L2 cache only) that were supplied by the L3 cache where a snoop was sent but the snoop missed.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_RFO.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C0020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch RFOs (written to the L2 cache only) that were supplied by the L3 cache where no snoop was needed to satisfy the request.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_RFO.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts modified writebacks from L1 cache that miss the L2 cache that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.L1WB_M.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1001F803C0000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts modified writeBacks from L2 cache that miss the L3 cache that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.L2WB_M.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2001F803C0000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts streaming stores which modify only part of a 64 byte cacheline that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.PARTIAL_STREAMING_WR.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x401F803C0000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.READS_TO_CORE.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1F803C0477", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.READS_TO_CORE.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0477", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by the L3 cache where a snoop was sent, the snoop hit, but no data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.READS_TO_CORE.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0477", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and non-modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.READS_TO_CORE.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0477", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by the L3 cache where a snoop was sent but the snoop missed.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.READS_TO_CORE.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C0477", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by the L3 cache where no snoop was needed to satisfy the request.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.READS_TO_CORE.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0477", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts streaming stores that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.STREAMING_WR.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1F803C0800", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts uncached memory reads that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.UC_RD.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x101F803C0000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts uncached memory reads that were supplied by the L3 cache where a snoop was sent, the snoop hit, and modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.UC_RD.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1010003C0000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts uncached memory reads that were supplied by the L3 cache where a snoop was sent, the snoop hit, but no data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.UC_RD.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1004003C0000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts uncached memory reads that were supplied by the L3 cache where a snoop was sent, the snoop hit, and non-modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.UC_RD.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1008003C0000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts uncached memory reads that were supplied by the L3 cache where a snoop was sent but the snoop missed.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.UC_RD.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1002003C0000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts uncached memory reads that were supplied by the L3 cache where no snoop was needed to satisfy the request.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.UC_RD.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1001003C0000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts uncached memory writes that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.UC_WR.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x201F803C0000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts the number of issue slots every cycle that were not delivered by the frontend due to instruction cache misses.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x71", "EventName": "TOPDOWN_FE_BOUND.ICACHE", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "1000003", "UMask": "0x20" }
tools/perf/pmu-events/arch/x86/elkhartlake/floating-point.json +0 -11
@@ -1,36 +1,25 @@ [ { "BriefDescription": "Counts the number of cycles the floating point divider is busy.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xcd", "EventName": "CYCLES_DIV_BUSY.FPDIV", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of cycles the floating point divider is busy. Does not imply a stall waiting for the divider.", "SampleAfterValue": "200003", "UMask": "0x2" }, { "BriefDescription": "Counts the number of floating point operations retired that required microcode assist.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xc3", "EventName": "MACHINE_CLEARS.FP_ASSIST", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of floating point operations retired that required microcode assist, which is not a reflection of the number of FP operations, instructions or uops.", "SampleAfterValue": "20003", "UMask": "0x4" }, { "BriefDescription": "Counts the number of floating point divide uops retired (x87 and SSE, including x87 sqrt).", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xc2", "EventName": "UOPS_RETIRED.FPDIV", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "2000003", "UMask": "0x8" }
tools/perf/pmu-events/arch/x86/elkhartlake/frontend.json +0 -36
@@ -1,103 +1,67 @@ [ { "BriefDescription": "Counts the total number of BACLEARS due to all branch types including conditional and unconditional jumps, returns, and indirect branches.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xe6", "EventName": "BACLEARS.ANY", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the total number of BACLEARS, which occur when the Branch Target Buffer (BTB) prediction or lack thereof, was corrected by a later branch predictor in the frontend. Includes BACLEARS due to all branch types including conditional and unconditional jumps, returns, and indirect branches.", "SampleAfterValue": "200003", "UMask": "0x1" }, { "BriefDescription": "Counts the number of BACLEARS due to a conditional jump.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xe6", "EventName": "BACLEARS.COND", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x10" }, { "BriefDescription": "Counts the number of BACLEARS due to an indirect branch.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xe6", "EventName": "BACLEARS.INDIRECT", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x2" }, { "BriefDescription": "Counts the number of BACLEARS due to a return branch.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xe6", "EventName": "BACLEARS.RETURN", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x8" }, { "BriefDescription": "Counts the number of BACLEARS due to a direct, unconditional jump.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xe6", "EventName": "BACLEARS.UNCOND", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x4" }, { "BriefDescription": "Counts the number of times a decode restriction reduces the decode throughput due to wrong instruction length prediction.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xe9", "EventName": "DECODE_RESTRICTION.PREDECODE_WRONG", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x1" }, { "BriefDescription": "Counts the number of requests to the instruction cache for one or more bytes of a cache line.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x80", "EventName": "ICACHE.ACCESSES", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the total number of requests to the instruction cache. The event only counts new cache line accesses, so that multiple back to back fetches to the exact same cache line or byte chunk count as one. Specifically, the event counts when accesses from sequential code crosses the cache line boundary, or when a branch target is moved to a new line or to a non-sequential byte chunk of the same line.", "SampleAfterValue": "200003", "UMask": "0x3" }, { "BriefDescription": "Counts the number of instruction cache hits.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x80", "EventName": "ICACHE.HIT", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of requests that hit in the instruction cache. The event only counts new cache line accesses, so that multiple back to back fetches to the exact same cache line and byte chunk count as one. Specifically, the event counts when accesses from sequential code crosses the cache line boundary, or when a branch target is moved to a new line or to a non-sequential byte chunk of the same line.", "SampleAfterValue": "200003", "UMask": "0x1" }, { "BriefDescription": "Counts the number of instruction cache misses.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x80", "EventName": "ICACHE.MISSES", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of missed requests to the instruction cache. The event only counts new cache line accesses, so that multiple back to back fetches to the exact same cache line and byte chunk count as one. Specifically, the event counts when accesses from sequential code crosses the cache line boundary, or when a branch target is moved to a new line or to a non-sequential byte chunk of the same line.", "SampleAfterValue": "200003", "UMask": "0x2"
tools/perf/pmu-events/arch/x86/elkhartlake/memory.json +0 -84
441 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/elkhartlake/other.json +0 -143
674 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/elkhartlake/pipeline.json +0 -213
609 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/elkhartlake/virtual-memory.json +0 -117
117 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.39.0.314.g84b9a713c41-goog
Part of the diff is not shown here. View the raw message.
Ian Rogers
reviewerPATCH 10/32 perf vendor events intel: Refresh goldmont events
Update the goldmont events using the new tooling from:
https://github.com/intel/perfmon
The events are unchanged but unused json values are removed. This increases consistency across the json files.
--- .../pmu-events/arch/x86/goldmont/cache.json | 288 ------------------ .../arch/x86/goldmont/floating-point.json | 6 - .../arch/x86/goldmont/frontend.json | 16 - .../pmu-events/arch/x86/goldmont/memory.json | 6 - .../pmu-events/arch/x86/goldmont/other.json | 10 - .../arch/x86/goldmont/pipeline.json | 77 ----- .../arch/x86/goldmont/virtual-memory.json | 14 - 7 files changed, 417 deletions(-)
tools/perf/pmu-events/arch/x86/goldmont/cache.json +0 -288
@@ -1,8 +1,6 @@ [ { "BriefDescription": "Requests rejected by the L2Q", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x31", "EventName": "CORE_REJECT_L2Q.ALL", "PublicDescription": "Counts the number of demand and L1 prefetcher requests rejected by the L2Q due to a full or nearly full condition which likely indicates back pressure from L2Q. It also counts requests that would have gone directly to the XQ, but are rejected due to a full or nearly full condition, indicating back pressure from the IDI link. The L2Q may also reject transactions from a core to ensure fairness between cores, or to delay a core's dirty eviction when the address conflicts with incoming external snoops.",
@@ -10,8 +8,6 @@ }, { "BriefDescription": "L1 Cache evictions for dirty data", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x51", "EventName": "DL1.DIRTY_EVICTION", "PublicDescription": "Counts when a modified (dirty) cache line is evicted from the data L1 cache and needs to be written back to memory. No count will occur if the evicted line is clean, and hence does not require a writeback.",
@@ -20,8 +16,6 @@ }, { "BriefDescription": "Cycles code-fetch stalled due to an outstanding ICache miss.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x86", "EventName": "FETCH_STALL.ICACHE_FILL_PENDING_CYCLES", "PublicDescription": "Counts cycles that fetch is stalled due to an outstanding ICache miss. That is, the decoder queue is able to accept bytes, but the fetch unit is unable to provide bytes due to an ICache miss. Note: this event is not the same as the total number of cycles spent retrieving instruction cache lines from the memory hierarchy.",
@@ -30,8 +24,6 @@ }, { "BriefDescription": "Requests rejected by the XQ", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x30", "EventName": "L2_REJECT_XQ.ALL", "PublicDescription": "Counts the number of demand and prefetch transactions that the L2 XQ rejects due to a full or near full condition which likely indicates back pressure from the intra-die interconnect (IDI) fabric. The XQ may reject transactions from the L2Q (non-cacheable requests), L2 misses and L2 write-back victims.",
@@ -39,8 +31,6 @@ }, { "BriefDescription": "L2 cache request misses", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x2E", "EventName": "LONGEST_LAT_CACHE.MISS", "PublicDescription": "Counts memory requests originating from the core that miss in the L2 cache.",
@@ -49,8 +39,6 @@ }, { "BriefDescription": "L2 cache requests", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x2E", "EventName": "LONGEST_LAT_CACHE.REFERENCE", "PublicDescription": "Counts memory requests originating from the core that reference a cache line in the L2 cache.",
@@ -59,8 +47,6 @@ }, { "BriefDescription": "Loads retired that came from DRAM (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.DRAM_HIT",
@@ -71,8 +57,6 @@ }, { "BriefDescription": "Memory uop retired where cross core or cross module HITM occurred (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.HITM",
@@ -83,8 +67,6 @@ }, { "BriefDescription": "Load uops retired that hit L1 data cache (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.L1_HIT",
@@ -95,8 +77,6 @@ }, { "BriefDescription": "Load uops retired that missed L1 data cache (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.L1_MISS",
@@ -107,8 +87,6 @@ }, { "BriefDescription": "Load uops retired that hit L2 (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.L2_HIT",
@@ -119,8 +97,6 @@ }, { "BriefDescription": "Load uops retired that missed L2 (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.L2_MISS",
@@ -131,8 +107,6 @@ }, { "BriefDescription": "Loads retired that hit WCB (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.WCB_HIT",
@@ -143,8 +117,6 @@ }, { "BriefDescription": "Memory uops retired (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.ALL",
@@ -155,8 +127,6 @@ }, { "BriefDescription": "Load uops retired (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.ALL_LOADS",
@@ -167,8 +137,6 @@ }, { "BriefDescription": "Store uops retired (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.ALL_STORES",
@@ -179,8 +147,6 @@ }, { "BriefDescription": "Locked load uops retired (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.LOCK_LOADS",
@@ -191,8 +157,6 @@ }, { "BriefDescription": "Memory uops retired that split a cache-line (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.SPLIT",
@@ -203,8 +167,6 @@ }, { "BriefDescription": "Load uops retired that split a cache-line (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.SPLIT_LOADS",
@@ -215,8 +177,6 @@ }, { "BriefDescription": "Stores uops retired that split a cache-line (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.SPLIT_STORES",
@@ -227,8 +187,6 @@ }, { "BriefDescription": "Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE", "SampleAfterValue": "100007",
@@ -236,1066 +194,820 @@ }, { "BriefDescription": "Counts data reads (demand & prefetch) that hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0000043091", - "Offcore": "1", "PublicDescription": "Counts data reads (demand & prefetch) that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data reads (demand & prefetch) that miss the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3600003091", - "Offcore": "1", "PublicDescription": "Counts data reads (demand & prefetch) that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data reads (demand & prefetch) that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000003091", - "Offcore": "1", "PublicDescription": "Counts data reads (demand & prefetch) that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data reads (demand & prefetch) that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0400003091", - "Offcore": "1", "PublicDescription": "Counts data reads (demand & prefetch) that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data reads (demand & prefetch) that true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0200003091", - "Offcore": "1", "PublicDescription": "Counts data reads (demand & prefetch) that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data reads generated by L1 or L2 prefetchers that hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_PF_DATA_RD.L2_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0000043010", - "Offcore": "1", "PublicDescription": "Counts data reads generated by L1 or L2 prefetchers that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data reads generated by L1 or L2 prefetchers that miss the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_PF_DATA_RD.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3600003010", - "Offcore": "1", "PublicDescription": "Counts data reads generated by L1 or L2 prefetchers that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data reads generated by L1 or L2 prefetchers that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_PF_DATA_RD.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000003010", - "Offcore": "1", "PublicDescription": "Counts data reads generated by L1 or L2 prefetchers that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data reads generated by L1 or L2 prefetchers that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_PF_DATA_RD.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0400003010", - "Offcore": "1", "PublicDescription": "Counts data reads generated by L1 or L2 prefetchers that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data reads generated by L1 or L2 prefetchers that true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_PF_DATA_RD.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0200003010", - "Offcore": "1", "PublicDescription": "Counts data reads generated by L1 or L2 prefetchers that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) that hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x00000432b7", - "Offcore": "1", "PublicDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) that miss the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x36000032b7", - "Offcore": "1", "PublicDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10000032b7", - "Offcore": "1", "PublicDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x04000032b7", - "Offcore": "1", "PublicDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) that true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x02000032b7", - "Offcore": "1", "PublicDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts requests to the uncore subsystem that have any transaction responses from the uncore subsystem.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0000018000", - "Offcore": "1", "PublicDescription": "Counts requests to the uncore subsystem that have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts requests to the uncore subsystem that hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0000048000", - "Offcore": "1", "PublicDescription": "Counts requests to the uncore subsystem that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts requests to the uncore subsystem that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000008000", - "Offcore": "1", "PublicDescription": "Counts requests to the uncore subsystem that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts requests to the uncore subsystem that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0400008000", - "Offcore": "1", "PublicDescription": "Counts requests to the uncore subsystem that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts requests to the uncore subsystem that true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0200008000", - "Offcore": "1", "PublicDescription": "Counts requests to the uncore subsystem that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) that hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0000040022", - "Offcore": "1", "PublicDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) that miss the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3600000022", - "Offcore": "1", "PublicDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000000022", - "Offcore": "1", "PublicDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0400000022", - "Offcore": "1", "PublicDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) that true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0200000022", - "Offcore": "1", "PublicDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts bus lock and split lock requests that have any transaction responses from the uncore subsystem.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0000010400", - "Offcore": "1", "PublicDescription": "Counts bus lock and split lock requests that have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions that hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.COREWB.L2_HIT", "MSRIndex": "0x1a6", "MSRValue": "0x0000040008", - "Offcore": "1", "PublicDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions that miss the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.COREWB.L2_MISS.ANY", "MSRIndex": "0x1a6", "MSRValue": "0x3600000008", - "Offcore": "1", "PublicDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.COREWB.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6", "MSRValue": "0x1000000008", - "Offcore": "1", "PublicDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.COREWB.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6", "MSRValue": "0x0400000008", - "Offcore": "1", "PublicDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions that true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.COREWB.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6", "MSRValue": "0x0200000008", - "Offcore": "1", "PublicDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache that hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0000040004", - "Offcore": "1", "PublicDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache that miss the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3600000004", - "Offcore": "1", "PublicDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0400000004", - "Offcore": "1", "PublicDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache that true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0200000004", - "Offcore": "1", "PublicDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache that are outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.OUTSTANDING", "MSRIndex": "0x1a6", "MSRValue": "0x4000000004", - "Offcore": "1", "PublicDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache that are outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand cacheable data reads of full cache lines that hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0000040001", - "Offcore": "1", "PublicDescription": "Counts demand cacheable data reads of full cache lines that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand cacheable data reads of full cache lines that miss the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3600000001", - "Offcore": "1", "PublicDescription": "Counts demand cacheable data reads of full cache lines that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand cacheable data reads of full cache lines that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000000001", - "Offcore": "1", "PublicDescription": "Counts demand cacheable data reads of full cache lines that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand cacheable data reads of full cache lines that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0400000001", - "Offcore": "1", "PublicDescription": "Counts demand cacheable data reads of full cache lines that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand cacheable data reads of full cache lines that true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0200000001", - "Offcore": "1", "PublicDescription": "Counts demand cacheable data reads of full cache lines that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand cacheable data reads of full cache lines that are outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.OUTSTANDING", "MSRIndex": "0x1a6", "MSRValue": "0x4000000001", - "Offcore": "1", "PublicDescription": "Counts demand cacheable data reads of full cache lines that are outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line that hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0000040002", - "Offcore": "1", "PublicDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line that miss the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3600000002", - "Offcore": "1", "PublicDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000000002", - "Offcore": "1", "PublicDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0400000002", - "Offcore": "1", "PublicDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line that true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0200000002", - "Offcore": "1", "PublicDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line that are outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.OUTSTANDING", "MSRIndex": "0x1a6", "MSRValue": "0x4000000002", - "Offcore": "1", "PublicDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line that are outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes that hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.FULL_STREAMING_STORES.L2_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0000040800", - "Offcore": "1", "PublicDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes that miss the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.FULL_STREAMING_STORES.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3600000800", - "Offcore": "1", "PublicDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.FULL_STREAMING_STORES.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000000800", - "Offcore": "1", "PublicDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.FULL_STREAMING_STORES.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0400000800", - "Offcore": "1", "PublicDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes that true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.FULL_STREAMING_STORES.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0200000800", - "Offcore": "1", "PublicDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand data partial reads, including data in uncacheable (UC) or uncacheable write combining (USWC) memory types that miss the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3600000080", - "Offcore": "1", "PublicDescription": "Counts demand data partial reads, including data in uncacheable (UC) or uncacheable write combining (USWC) memory types that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts partial cache line data writes to uncacheable write combining (USWC) memory region that hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PARTIAL_STREAMING_STORES.L2_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0000044000", - "Offcore": "1", "PublicDescription": "Counts partial cache line data writes to uncacheable write combining (USWC) memory region that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts partial cache line data writes to uncacheable write combining (USWC) memory region that miss the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PARTIAL_STREAMING_STORES.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3600004000", - "Offcore": "1", "PublicDescription": "Counts partial cache line data writes to uncacheable write combining (USWC) memory region that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts partial cache line data writes to uncacheable write combining (USWC) memory region that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PARTIAL_STREAMING_STORES.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000004000", - "Offcore": "1", "PublicDescription": "Counts partial cache line data writes to uncacheable write combining (USWC) memory region that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts partial cache line data writes to uncacheable write combining (USWC) memory region that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PARTIAL_STREAMING_STORES.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0400004000", - "Offcore": "1", "PublicDescription": "Counts partial cache line data writes to uncacheable write combining (USWC) memory region that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts partial cache line data writes to uncacheable write combining (USWC) memory region that true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PARTIAL_STREAMING_STORES.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0200004000", - "Offcore": "1", "PublicDescription": "Counts partial cache line data writes to uncacheable write combining (USWC) memory region that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts the number of demand write requests (RFO) generated by a write to partial data cache line, including the writes to uncacheable (UC) and write through (WT), and write protected (WP) types of memory that miss the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3600000100", - "Offcore": "1", "PublicDescription": "Counts the number of demand write requests (RFO) generated by a write to partial data cache line, including the writes to uncacheable (UC) and write through (WT), and write protected (WP) types of memory that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher that hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0000042000", - "Offcore": "1", "PublicDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher that miss the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3600002000", - "Offcore": "1", "PublicDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000002000", - "Offcore": "1", "PublicDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0400002000", - "Offcore": "1", "PublicDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher that true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0200002000", - "Offcore": "1", "PublicDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher that hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L2_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0000040010", - "Offcore": "1", "PublicDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher that miss the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3600000010", - "Offcore": "1", "PublicDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000000010", - "Offcore": "1", "PublicDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0400000010", - "Offcore": "1", "PublicDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher that true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0200000010", - "Offcore": "1", "PublicDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher that hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0000040020", - "Offcore": "1", "PublicDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher that miss the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3600000020", - "Offcore": "1", "PublicDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000000020", - "Offcore": "1", "PublicDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0400000020", - "Offcore": "1", "PublicDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher that true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0200000020", - "Offcore": "1", "PublicDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any data writes to uncacheable write combining (USWC) memory region that hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.STREAMING_STORES.L2_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0000044800", - "Offcore": "1", "PublicDescription": "Counts any data writes to uncacheable write combining (USWC) memory region that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any data writes to uncacheable write combining (USWC) memory region that miss the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.STREAMING_STORES.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3600004800", - "Offcore": "1", "PublicDescription": "Counts any data writes to uncacheable write combining (USWC) memory region that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cache lines requests by software prefetch instructions that hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.SW_PREFETCH.L2_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0000041000", - "Offcore": "1", "PublicDescription": "Counts data cache lines requests by software prefetch instructions that hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cache lines requests by software prefetch instructions that miss the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.SW_PREFETCH.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3600001000", - "Offcore": "1", "PublicDescription": "Counts data cache lines requests by software prefetch instructions that miss the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cache lines requests by software prefetch instructions that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.SW_PREFETCH.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000001000", - "Offcore": "1", "PublicDescription": "Counts data cache lines requests by software prefetch instructions that miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cache lines requests by software prefetch instructions that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.SW_PREFETCH.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0400001000", - "Offcore": "1", "PublicDescription": "Counts data cache lines requests by software prefetch instructions that miss the L2 cache with a snoop hit in the other processor module, no data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cache lines requests by software prefetch instructions that true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.SW_PREFETCH.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0200001000", - "Offcore": "1", "PublicDescription": "Counts data cache lines requests by software prefetch instructions that true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1"
tools/perf/pmu-events/arch/x86/goldmont/floating-point.json +0 -6
@@ -1,8 +1,6 @@ [ { "BriefDescription": "Cycles the FP divide unit is busy", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xCD", "EventName": "CYCLES_DIV_BUSY.FPDIV", "PublicDescription": "Counts core cycles the floating point divide unit is busy.",
@@ -11,8 +9,6 @@ }, { "BriefDescription": "Machine clears due to FP assists", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xC3", "EventName": "MACHINE_CLEARS.FP_ASSIST", "PublicDescription": "Counts machine clears due to floating point (FP) operations needing assists. For instance, if the result was a floating point denormal, the hardware clears the pipeline and reissues uops to produce the correct IEEE compliant denormal result.",
@@ -21,8 +17,6 @@ }, { "BriefDescription": "Floating point divide uops retired. (Precise Event Capable)", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xC2", "EventName": "UOPS_RETIRED.FPDIV", "PEBS": "2",
tools/perf/pmu-events/arch/x86/goldmont/frontend.json +0 -16
@@ -1,8 +1,6 @@ [ { "BriefDescription": "BACLEARs asserted for any branch type", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xE6", "EventName": "BACLEARS.ALL", "PublicDescription": "Counts the number of times a BACLEAR is signaled for any reason, including, but not limited to indirect branch/call, Jcc (Jump on Conditional Code/Jump if Condition is Met) branch, unconditional branch/call, and returns.",
@@ -11,8 +9,6 @@ }, { "BriefDescription": "BACLEARs asserted for conditional branch", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xE6", "EventName": "BACLEARS.COND", "PublicDescription": "Counts BACLEARS on Jcc (Jump on Conditional Code/Jump if Condition is Met) branches.",
@@ -21,8 +17,6 @@ }, { "BriefDescription": "BACLEARs asserted for return branch", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xE6", "EventName": "BACLEARS.RETURN", "PublicDescription": "Counts BACLEARS on return instructions.",
@@ -31,8 +25,6 @@ }, { "BriefDescription": "Decode restrictions due to predicting wrong instruction length", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xE9", "EventName": "DECODE_RESTRICTION.PREDECODE_WRONG", "PublicDescription": "Counts the number of times the prediction (from the predecode cache) for instruction length is incorrect.",
@@ -41,8 +33,6 @@ }, { "BriefDescription": "References per ICache line. This event counts differently than Intel processors based on Silvermont microarchitecture", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x80", "EventName": "ICACHE.ACCESSES", "PublicDescription": "Counts requests to the Instruction Cache (ICache) for one or more bytes in an ICache Line. The event strives to count on a cache line basis, so that multiple fetches to a single cache line count as one ICACHE.ACCESS. Specifically, the event counts when accesses from straight line code crosses the cache line boundary, or when a branch target is to a new line.\r\nThis event counts differently than Intel processors based on Silvermont microarchitecture.",
@@ -51,8 +41,6 @@ }, { "BriefDescription": "References per ICache line that are available in the ICache (hit). This event counts differently than Intel processors based on Silvermont microarchitecture", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x80", "EventName": "ICACHE.HIT", "PublicDescription": "Counts requests to the Instruction Cache (ICache) for one or more bytes in an ICache Line and that cache line is in the ICache (hit). The event strives to count on a cache line basis, so that multiple accesses which hit in a single cache line count as one ICACHE.HIT. Specifically, the event counts when straight line code crosses the cache line boundary, or when a branch target is to a new line, and that cache line is in the ICache. This event counts differently than Intel processors based on Silvermont microarchitecture.",
@@ -61,8 +49,6 @@ }, { "BriefDescription": "References per ICache line that are not available in the ICache (miss). This event counts differently than Intel processors based on Silvermont microarchitecture", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x80", "EventName": "ICACHE.MISSES", "PublicDescription": "Counts requests to the Instruction Cache (ICache) for one or more bytes in an ICache Line and that cache line is not in the ICache (miss). The event strives to count on a cache line basis, so that multiple accesses which miss in a single cache line count as one ICACHE.MISS. Specifically, the event counts when straight line code crosses the cache line boundary, or when a branch target is to a new line, and that cache line is not in the ICache. This event counts differently than Intel processors based on Silvermont microarchitecture.",
@@ -71,8 +57,6 @@ }, { "BriefDescription": "MS decode starts", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xE7", "EventName": "MS_DECODED.MS_ENTRY", "PublicDescription": "Counts the number of times the Microcode Sequencer (MS) starts a flow of uops from the MSROM. It does not count every time a uop is read from the MSROM. The most common case that this counts is when a micro-coded instruction is encountered by the front end of the machine. Other cases include when an instruction encounters a fault, trap, or microcode assist of any sort that initiates a flow of uops. The event will count MS startups for uops that are speculative, and subsequently cleared by branch mispredict or a machine clear.",
tools/perf/pmu-events/arch/x86/goldmont/memory.json +0 -6
@@ -1,8 +1,6 @@ [ { "BriefDescription": "Machine clears due to memory ordering issue", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xC3", "EventName": "MACHINE_CLEARS.MEMORY_ORDERING", "PublicDescription": "Counts machine clears due to memory ordering issues. This occurs when a snoop request happens and the machine is uncertain if memory ordering will be preserved as another core is in the process of modifying the data.",
@@ -11,8 +9,6 @@ }, { "BriefDescription": "Load uops that split a page (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x13", "EventName": "MISALIGN_MEM_REF.LOAD_PAGE_SPLIT", "PEBS": "2",
@@ -22,8 +18,6 @@ }, { "BriefDescription": "Store uops that split a page (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x13", "EventName": "MISALIGN_MEM_REF.STORE_PAGE_SPLIT", "PEBS": "2",
tools/perf/pmu-events/arch/x86/goldmont/other.json +0 -10
@@ -1,8 +1,6 @@ [ { "BriefDescription": "Cycles code-fetch stalled due to any reason.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x86", "EventName": "FETCH_STALL.ALL", "PublicDescription": "Counts cycles that fetch is stalled due to any reason. That is, the decoder queue is able to accept bytes, but the fetch unit is unable to provide bytes. This will include cycles due to an ITLB miss, ICache miss and other events.",
@@ -10,8 +8,6 @@ }, { "BriefDescription": "Cycles code-fetch stalled due to an outstanding ITLB miss.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x86", "EventName": "FETCH_STALL.ITLB_FILL_PENDING_CYCLES", "PublicDescription": "Counts cycles that fetch is stalled due to an outstanding ITLB miss. That is, the decoder queue is able to accept bytes, but the fetch unit is unable to provide bytes due to an ITLB miss. Note: this event is not the same as page walk cycles to retrieve an instruction translation.",
@@ -20,8 +16,6 @@ }, { "BriefDescription": "Cycles hardware interrupts are masked", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xCB", "EventName": "HW_INTERRUPTS.MASKED", "PublicDescription": "Counts the number of core cycles during which interrupts are masked (disabled). Increments by 1 each core cycle that EFLAGS.IF is 0, regardless of whether interrupts are pending or not.",
@@ -30,8 +24,6 @@ }, { "BriefDescription": "Cycles pending interrupts are masked", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xCB", "EventName": "HW_INTERRUPTS.PENDING_AND_MASKED", "PublicDescription": "Counts core cycles during which there are pending interrupts, but interrupts are masked (EFLAGS.IF = 0).",
@@ -40,8 +32,6 @@ }, { "BriefDescription": "Hardware interrupts received", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xCB", "EventName": "HW_INTERRUPTS.RECEIVED", "PublicDescription": "Counts hardware interrupts received by the processor.",
tools/perf/pmu-events/arch/x86/goldmont/pipeline.json +0 -77
317 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/goldmont/virtual-memory.json +0 -14
@@ -1,8 +1,6 @@ [ { "BriefDescription": "ITLB misses", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x81", "EventName": "ITLB.MISS", "PublicDescription": "Counts the number of times the machine was unable to find a translation in the Instruction Translation Lookaside Buffer (ITLB) for a linear address of an instruction fetch. It counts when new translation are filled into the ITLB. The event is speculative in nature, but will not count translations (page walks) that are begun and not finished, or translations that are finished but not filled into the ITLB.",
@@ -11,8 +9,6 @@ }, { "BriefDescription": "Memory uops retired that missed the DTLB (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.DTLB_MISS",
@@ -23,8 +19,6 @@ }, { "BriefDescription": "Load uops retired that missed the DTLB (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.DTLB_MISS_LOADS",
@@ -35,8 +29,6 @@ }, { "BriefDescription": "Store uops retired that missed the DTLB (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.DTLB_MISS_STORES",
@@ -47,8 +39,6 @@ }, { "BriefDescription": "Duration of page-walks in cycles", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x05", "EventName": "PAGE_WALKS.CYCLES", "PublicDescription": "Counts every core cycle a page-walk is in progress due to either a data memory operation or an instruction fetch.",
@@ -57,8 +47,6 @@ }, { "BriefDescription": "Duration of D-side page-walks in cycles", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x05", "EventName": "PAGE_WALKS.D_SIDE_CYCLES", "PublicDescription": "Counts every core cycle when a Data-side (walks due to a data operation) page walk is in progress.",
@@ -67,8 +55,6 @@ }, { "BriefDescription": "Duration of I-side pagewalks in cycles", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x05", "EventName": "PAGE_WALKS.I_SIDE_CYCLES", "PublicDescription": "Counts every core cycle when a Instruction-side (walks due to an instruction fetch) page walk is in progress.",
Signature · 1 line
2.39.0.314.g84b9a713c41-goog
Ian Rogers
reviewerPATCH 11/32 perf vendor events intel: Refresh goldmontplus events
In reply to Ian RogersUpdate the goldmontplus events using the new tooling from:
https://github.com/intel/perfmon
The events are unchanged but unused json values are removed. This increases consistency across the json files.
--- .../arch/x86/goldmontplus/cache.json | 470 ------------------ .../arch/x86/goldmontplus/floating-point.json | 11 - .../arch/x86/goldmontplus/frontend.json | 32 -- .../arch/x86/goldmontplus/memory.json | 10 - .../arch/x86/goldmontplus/other.json | 20 - .../arch/x86/goldmontplus/pipeline.json | 143 ------ .../arch/x86/goldmontplus/virtual-memory.json | 69 --- 7 files changed, 755 deletions(-)
tools/perf/pmu-events/arch/x86/goldmontplus/cache.json +0 -470
@@ -1,1463 +1,993 @@ [ { "BriefDescription": "Requests rejected by the L2Q", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x31", "EventName": "CORE_REJECT_L2Q.ALL", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of demand and L1 prefetcher requests rejected by the L2Q due to a full or nearly full condition which likely indicates back pressure from L2Q. It also counts requests that would have gone directly to the XQ, but are rejected due to a full or nearly full condition, indicating back pressure from the IDI link. The L2Q may also reject transactions from a core to insure fairness between cores, or to delay a core's dirty eviction when the address conflicts with incoming external snoops.", "SampleAfterValue": "200003" }, { "BriefDescription": "L1 Cache evictions for dirty data", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x51", "EventName": "DL1.REPLACEMENT", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts when a modified (dirty) cache line is evicted from the data L1 cache and needs to be written back to memory. No count will occur if the evicted line is clean, and hence does not require a writeback.", "SampleAfterValue": "200003", "UMask": "0x1" }, { "BriefDescription": "Cycles code-fetch stalled due to an outstanding ICache miss.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x86", "EventName": "FETCH_STALL.ICACHE_FILL_PENDING_CYCLES", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts cycles that fetch is stalled due to an outstanding ICache miss. That is, the decoder queue is able to accept bytes, but the fetch unit is unable to provide bytes due to an ICache miss. Note: this event is not the same as the total number of cycles spent retrieving instruction cache lines from the memory hierarchy.", "SampleAfterValue": "200003", "UMask": "0x2" }, { "BriefDescription": "Requests rejected by the XQ", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x30", "EventName": "L2_REJECT_XQ.ALL", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of demand and prefetch transactions that the L2 XQ rejects due to a full or near full condition which likely indicates back pressure from the intra-die interconnect (IDI) fabric. The XQ may reject transactions from the L2Q (non-cacheable requests), L2 misses and L2 write-back victims.", "SampleAfterValue": "200003" }, { "BriefDescription": "L2 cache request misses", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x2E", "EventName": "LONGEST_LAT_CACHE.MISS", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts memory requests originating from the core that miss in the L2 cache.", "SampleAfterValue": "200003", "UMask": "0x41" }, { "BriefDescription": "L2 cache requests", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x2E", "EventName": "LONGEST_LAT_CACHE.REFERENCE", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts memory requests originating from the core that reference a cache line in the L2 cache.", "SampleAfterValue": "200003", "UMask": "0x4f" }, { "BriefDescription": "Loads retired that came from DRAM (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.DRAM_HIT", "PEBS": "2", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts memory load uops retired where the data is retrieved from DRAM. Event is counted at retirement, so the speculative loads are ignored. A memory load can hit (or miss) the L1 cache, hit (or miss) the L2 cache, hit DRAM, hit in the WCB or receive a HITM response.", "SampleAfterValue": "200003", "UMask": "0x80" }, { "BriefDescription": "Memory uop retired where cross core or cross module HITM occurred (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.HITM", "PEBS": "2", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts load uops retired where the cache line containing the data was in the modified state of another core or modules cache (HITM). More specifically, this means that when the load address was checked by other caching agents (typically another processor) in the system, one of those caching agents indicated that they had a dirty copy of the data. Loads that obtain a HITM response incur greater latency than most is typical for a load. In addition, since HITM indicates that some other processor had this data in its cache, it implies that the data was shared between processors, or potentially was a lock or semaphore value. This event is useful for locating sharing, false sharing, and contended locks.", "SampleAfterValue": "200003", "UMask": "0x20" }, { "BriefDescription": "Load uops retired that hit L1 data cache (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.L1_HIT", "PEBS": "2", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts load uops retired that hit the L1 data cache.", "SampleAfterValue": "200003", "UMask": "0x1" }, { "BriefDescription": "Load uops retired that missed L1 data cache (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.L1_MISS", "PEBS": "2", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts load uops retired that miss the L1 data cache.", "SampleAfterValue": "200003", "UMask": "0x8" }, { "BriefDescription": "Load uops retired that hit L2 (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.L2_HIT", "PEBS": "2", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts load uops retired that hit in the L2 cache.", "SampleAfterValue": "200003", "UMask": "0x2" }, { "BriefDescription": "Load uops retired that missed L2 (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.L2_MISS", "PEBS": "2", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts load uops retired that miss in the L2 cache.", "SampleAfterValue": "200003", "UMask": "0x10" }, { "BriefDescription": "Loads retired that hit WCB (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.WCB_HIT", "PEBS": "2", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts memory load uops retired where the data is retrieved from the WCB (or fill buffer), indicating that the load found its data while that data was in the process of being brought into the L1 cache. Typically a load will receive this indication when some other load or prefetch missed the L1 cache and was in the process of retrieving the cache line containing the data, but that process had not yet finished (and written the data back to the cache). For example, consider load X and Y, both referencing the same cache line that is not in the L1 cache. If load X misses cache first, it obtains and WCB (or fill buffer) and begins the process of requesting the data. When load Y requests the data, it will either hit the WCB, or the L1 cache, depending on exactly what time the request to Y occurs.", "SampleAfterValue": "200003", "UMask": "0x40" }, { "BriefDescription": "Memory uops retired (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.ALL", "PEBS": "2", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of memory uops retired that is either a loads or a store or both.", "SampleAfterValue": "200003", "UMask": "0x83" }, { "BriefDescription": "Load uops retired (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.ALL_LOADS", "PEBS": "2", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of load uops retired.", "SampleAfterValue": "200003", "UMask": "0x81" }, { "BriefDescription": "Store uops retired (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.ALL_STORES", "PEBS": "2", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of store uops retired.", "SampleAfterValue": "200003", "UMask": "0x82" }, { "BriefDescription": "Locked load uops retired (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.LOCK_LOADS", "PEBS": "2", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts locked memory uops retired. This includes regular locks and bus locks. (To specifically count bus locks only, see the Offcore response event.) A locked access is one with a lock prefix, or an exchange to memory. See the SDM for a complete description of which memory load accesses are locks.", "SampleAfterValue": "200003", "UMask": "0x21" }, { "BriefDescription": "Memory uops retired that split a cache-line (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.SPLIT", "PEBS": "2", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts memory uops retired where the data requested spans a 64 byte cache line boundary.", "SampleAfterValue": "200003", "UMask": "0x43" }, { "BriefDescription": "Load uops retired that split a cache-line (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.SPLIT_LOADS", "PEBS": "2", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts load uops retired where the data requested spans a 64 byte cache line boundary.", "SampleAfterValue": "200003", "UMask": "0x41" }, { "BriefDescription": "Stores uops retired that split a cache-line (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.SPLIT_STORES", "PEBS": "2", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts store uops retired where the data requested spans a 64 byte cache line boundary.", "SampleAfterValue": "200003", "UMask": "0x42" }, { "BriefDescription": "Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data reads (demand & prefetch) have any transaction responses from the uncore subsystem.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.ANY_RESPONSE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000013091", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data reads (demand & prefetch) have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data reads (demand & prefetch) hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_HIT", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000043091", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data reads (demand & prefetch) hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data reads (demand & prefetch) miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x1000003091", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data reads (demand & prefetch) miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data reads (demand & prefetch) true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0200003091", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data reads (demand & prefetch) true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data reads (demand & prefetch) outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.OUTSTANDING", "MSRIndex": "0x1a6", "MSRValue": "0x4000003091", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data reads (demand & prefetch) outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data reads generated by L1 or L2 prefetchers have any transaction responses from the uncore subsystem.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_PF_DATA_RD.ANY_RESPONSE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000013010", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data reads generated by L1 or L2 prefetchers have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data reads generated by L1 or L2 prefetchers hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_PF_DATA_RD.L2_HIT", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000043010", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data reads generated by L1 or L2 prefetchers hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data reads generated by L1 or L2 prefetchers miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_PF_DATA_RD.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x1000003010", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data reads generated by L1 or L2 prefetchers miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data reads generated by L1 or L2 prefetchers true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_PF_DATA_RD.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0200003010", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data reads generated by L1 or L2 prefetchers true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data reads generated by L1 or L2 prefetchers outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_PF_DATA_RD.OUTSTANDING", "MSRIndex": "0x1a6", "MSRValue": "0x4000003010", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data reads generated by L1 or L2 prefetchers outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) have any transaction responses from the uncore subsystem.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_READ.ANY_RESPONSE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x00000132b7", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_HIT", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x00000432b7", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x10000032b7", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_READ.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x02000032b7", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_READ.OUTSTANDING", "MSRIndex": "0x1a6", "MSRValue": "0x40000032b7", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data read, code read, and read for ownership (RFO) requests (demand & prefetch) outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts requests to the uncore subsystem have any transaction responses from the uncore subsystem.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.ANY_RESPONSE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000018000", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts requests to the uncore subsystem have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts requests to the uncore subsystem hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_HIT", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000048000", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts requests to the uncore subsystem hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts requests to the uncore subsystem miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x1000008000", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts requests to the uncore subsystem miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts requests to the uncore subsystem true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0200008000", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts requests to the uncore subsystem true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts requests to the uncore subsystem outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.OUTSTANDING", "MSRIndex": "0x1a6", "MSRValue": "0x4000008000", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts requests to the uncore subsystem outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) have any transaction responses from the uncore subsystem.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_RFO.ANY_RESPONSE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000010022", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_HIT", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000040022", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x1000000022", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0200000022", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_RFO.OUTSTANDING", "MSRIndex": "0x1a6", "MSRValue": "0x4000000022", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts reads for ownership (RFO) requests (demand & prefetch) outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts bus lock and split lock requests have any transaction responses from the uncore subsystem.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.ANY_RESPONSE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000010400", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts bus lock and split lock requests have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts bus lock and split lock requests hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.L2_HIT", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000040400", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts bus lock and split lock requests hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts bus lock and split lock requests miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x1000000400", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts bus lock and split lock requests miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts bus lock and split lock requests true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0200000400", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts bus lock and split lock requests true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts bus lock and split lock requests outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.BUS_LOCKS.OUTSTANDING", "MSRIndex": "0x1a6", "MSRValue": "0x4000000400", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts bus lock and split lock requests outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions have any transaction responses from the uncore subsystem.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.COREWB.ANY_RESPONSE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000010008", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.COREWB.L2_HIT", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000040008", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.COREWB.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x1000000008", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.COREWB.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0200000008", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.COREWB.OUTSTANDING", "MSRIndex": "0x1a6", "MSRValue": "0x4000000008", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of writeback transactions caused by L1 or L2 cache evictions outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache have any transaction responses from the uncore subsystem.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.ANY_RESPONSE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000010004", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_HIT", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000040004", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x1000000004", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0200000004", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.OUTSTANDING", "MSRIndex": "0x1a6", "MSRValue": "0x4000000004", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts demand instruction cacheline and I-side prefetch requests that miss the instruction cache outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand cacheable data reads of full cache lines have any transaction responses from the uncore subsystem.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.ANY_RESPONSE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000010001", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts demand cacheable data reads of full cache lines have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand cacheable data reads of full cache lines hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_HIT", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000040001", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts demand cacheable data reads of full cache lines hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand cacheable data reads of full cache lines miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x1000000001", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts demand cacheable data reads of full cache lines miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand cacheable data reads of full cache lines true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0200000001", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts demand cacheable data reads of full cache lines true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand cacheable data reads of full cache lines outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.OUTSTANDING", "MSRIndex": "0x1a6", "MSRValue": "0x4000000001", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts demand cacheable data reads of full cache lines outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line have any transaction responses from the uncore subsystem.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.ANY_RESPONSE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000010002", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_HIT", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000040002", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x1000000002", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0200000002", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.OUTSTANDING", "MSRIndex": "0x1a6", "MSRValue": "0x4000000002", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts demand reads for ownership (RFO) requests generated by a write to full data cache line outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes have any transaction responses from the uncore subsystem.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.FULL_STREAMING_STORES.ANY_RESPONSE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000010800", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.FULL_STREAMING_STORES.L2_HIT", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000040800", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.FULL_STREAMING_STORES.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x1000000800", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.FULL_STREAMING_STORES.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0200000800", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.FULL_STREAMING_STORES.OUTSTANDING", "MSRIndex": "0x1a6", "MSRValue": "0x4000000800", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts full cache line data writes to uncacheable write combining (USWC) memory region and full cache-line non-temporal writes outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher have any transaction responses from the uncore subsystem.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.ANY_RESPONSE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000012000", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_HIT", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000042000", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x1000002000", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0200002000", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.OUTSTANDING", "MSRIndex": "0x1a6", "MSRValue": "0x4000002000", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data cache line reads generated by hardware L1 data cache prefetcher outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher have any transaction responses from the uncore subsystem.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.ANY_RESPONSE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000010010", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L2_HIT", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000040010", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x1000000010", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0200000010", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.OUTSTANDING", "MSRIndex": "0x1a6", "MSRValue": "0x4000000010", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data cacheline reads generated by hardware L2 cache prefetcher outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher have any transaction responses from the uncore subsystem.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.ANY_RESPONSE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000010020", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_HIT", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000040020", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x1000000020", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0200000020", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.OUTSTANDING", "MSRIndex": "0x1a6", "MSRValue": "0x4000000020", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts reads for ownership (RFO) requests generated by L2 prefetcher outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any data writes to uncacheable write combining (USWC) memory region have any transaction responses from the uncore subsystem.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.STREAMING_STORES.ANY_RESPONSE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000014800", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts any data writes to uncacheable write combining (USWC) memory region have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any data writes to uncacheable write combining (USWC) memory region hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.STREAMING_STORES.L2_HIT", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000044800", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts any data writes to uncacheable write combining (USWC) memory region hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any data writes to uncacheable write combining (USWC) memory region miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.STREAMING_STORES.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x1000004800", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts any data writes to uncacheable write combining (USWC) memory region miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any data writes to uncacheable write combining (USWC) memory region true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.STREAMING_STORES.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0200004800", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts any data writes to uncacheable write combining (USWC) memory region true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any data writes to uncacheable write combining (USWC) memory region outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.STREAMING_STORES.OUTSTANDING", "MSRIndex": "0x1a6", "MSRValue": "0x4000004800", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts any data writes to uncacheable write combining (USWC) memory region outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cache lines requests by software prefetch instructions have any transaction responses from the uncore subsystem.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.SW_PREFETCH.ANY_RESPONSE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000011000", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data cache lines requests by software prefetch instructions have any transaction responses from the uncore subsystem. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cache lines requests by software prefetch instructions hit the L2 cache.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.SW_PREFETCH.L2_HIT", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0000041000", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data cache lines requests by software prefetch instructions hit the L2 cache. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cache lines requests by software prefetch instructions miss the L2 cache with a snoop hit in the other processor module, data forwarding is required.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.SW_PREFETCH.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x1000001000", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data cache lines requests by software prefetch instructions miss the L2 cache with a snoop hit in the other processor module, data forwarding is required. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cache lines requests by software prefetch instructions true miss for the L2 cache with a snoop miss in the other processor module.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.SW_PREFETCH.L2_MISS.SNOOP_MISS_OR_NO_SNOOP_NEEDED", "MSRIndex": "0x1a6, 0x1a7", "MSRValue": "0x0200001000", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data cache lines requests by software prefetch instructions true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cache lines requests by software prefetch instructions outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.SW_PREFETCH.OUTSTANDING", "MSRIndex": "0x1a6", "MSRValue": "0x4000001000", - "Offcore": "1", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts data cache lines requests by software prefetch instructions outstanding, per cycle, from the time of the L2 miss to when any response is received. Requires MSR_OFFCORE_RESP[0,1] to specify request type and response. (duplicated for both MSRs)", "SampleAfterValue": "100007", "UMask": "0x1"
tools/perf/pmu-events/arch/x86/goldmontplus/floating-point.json +0 -11
@@ -1,36 +1,25 @@ [ { "BriefDescription": "Cycles the FP divide unit is busy", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xCD", "EventName": "CYCLES_DIV_BUSY.FPDIV", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts core cycles the floating point divide unit is busy.", "SampleAfterValue": "200003", "UMask": "0x2" }, { "BriefDescription": "Machine clears due to FP assists", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xC3", "EventName": "MACHINE_CLEARS.FP_ASSIST", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts machine clears due to floating point (FP) operations needing assists. For instance, if the result was a floating point denormal, the hardware clears the pipeline and reissues uops to produce the correct IEEE compliant denormal result.", "SampleAfterValue": "20003", "UMask": "0x4" }, { "BriefDescription": "Floating point divide uops retired (Precise Event Capable)", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xC2", "EventName": "UOPS_RETIRED.FPDIV", "PEBS": "2", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of floating point divide uops retired.", "SampleAfterValue": "2000003", "UMask": "0x8"
tools/perf/pmu-events/arch/x86/goldmontplus/frontend.json +0 -32
@@ -1,96 +1,64 @@ [ { "BriefDescription": "BACLEARs asserted for any branch type", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xE6", "EventName": "BACLEARS.ALL", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of times a BACLEAR is signaled for any reason, including, but not limited to indirect branch/call, Jcc (Jump on Conditional Code/Jump if Condition is Met) branch, unconditional branch/call, and returns.", "SampleAfterValue": "200003", "UMask": "0x1" }, { "BriefDescription": "BACLEARs asserted for conditional branch", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xE6", "EventName": "BACLEARS.COND", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts BACLEARS on Jcc (Jump on Conditional Code/Jump if Condition is Met) branches.", "SampleAfterValue": "200003", "UMask": "0x10" }, { "BriefDescription": "BACLEARs asserted for return branch", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xE6", "EventName": "BACLEARS.RETURN", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts BACLEARS on return instructions.", "SampleAfterValue": "200003", "UMask": "0x8" }, { "BriefDescription": "Decode restrictions due to predicting wrong instruction length", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xE9", "EventName": "DECODE_RESTRICTION.PREDECODE_WRONG", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of times the prediction (from the predecode cache) for instruction length is incorrect.", "SampleAfterValue": "200003", "UMask": "0x1" }, { "BriefDescription": "References per ICache line. This event counts differently than Intel processors based on Silvermont microarchitecture", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x80", "EventName": "ICACHE.ACCESSES", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts requests to the Instruction Cache (ICache) for one or more bytes in an ICache Line. The event strives to count on a cache line basis, so that multiple fetches to a single cache line count as one ICACHE.ACCESS. Specifically, the event counts when accesses from straight line code crosses the cache line boundary, or when a branch target is to a new line.\r\nThis event counts differently than Intel processors based on Silvermont microarchitecture.", "SampleAfterValue": "200003", "UMask": "0x3" }, { "BriefDescription": "References per ICache line that are available in the ICache (hit). This event counts differently than Intel processors based on Silvermont microarchitecture", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x80", "EventName": "ICACHE.HIT", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts requests to the Instruction Cache (ICache) for one or more bytes in an ICache Line and that cache line is in the ICache (hit). The event strives to count on a cache line basis, so that multiple accesses which hit in a single cache line count as one ICACHE.HIT. Specifically, the event counts when straight line code crosses the cache line boundary, or when a branch target is to a new line, and that cache line is in the ICache. This event counts differently than Intel processors based on Silvermont microarchitecture.", "SampleAfterValue": "200003", "UMask": "0x1" }, { "BriefDescription": "References per ICache line that are not available in the ICache (miss). This event counts differently than Intel processors based on Silvermont microarchitecture", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x80", "EventName": "ICACHE.MISSES", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts requests to the Instruction Cache (ICache) for one or more bytes in an ICache Line and that cache line is not in the ICache (miss). The event strives to count on a cache line basis, so that multiple accesses which miss in a single cache line count as one ICACHE.MISS. Specifically, the event counts when straight line code crosses the cache line boundary, or when a branch target is to a new line, and that cache line is not in the ICache. This event counts differently than Intel processors based on Silvermont microarchitecture.", "SampleAfterValue": "200003", "UMask": "0x2" }, { "BriefDescription": "MS decode starts", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xE7", "EventName": "MS_DECODED.MS_ENTRY", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of times the Microcode Sequencer (MS) starts a flow of uops from the MSROM. It does not count every time a uop is read from the MSROM. The most common case that this counts is when a micro-coded instruction is encountered by the front end of the machine. Other cases include when an instruction encounters a fault, trap, or microcode assist of any sort that initiates a flow of uops. The event will count MS startups for uops that are speculative, and subsequently cleared by branch mispredict or a machine clear.", "SampleAfterValue": "200003", "UMask": "0x1"
tools/perf/pmu-events/arch/x86/goldmontplus/memory.json +0 -10
@@ -1,36 +1,26 @@ [ { "BriefDescription": "Machine clears due to memory ordering issue", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0xC3", "EventName": "MACHINE_CLEARS.MEMORY_ORDERING", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts machine clears due to memory ordering issues. This occurs when a snoop request happens and the machine is uncertain if memory ordering will be preserved - as another core is in the process of modifying the data.", "SampleAfterValue": "20003", "UMask": "0x2" }, { "BriefDescription": "Load uops that split a page (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x13", "EventName": "MISALIGN_MEM_REF.LOAD_PAGE_SPLIT", "PEBS": "2", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts when a memory load of a uop spans a page boundary (a split) is retired.", "SampleAfterValue": "200003", "UMask": "0x2" }, { "BriefDescription": "Store uops that split a page (Precise event capable)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x13", "EventName": "MISALIGN_MEM_REF.STORE_PAGE_SPLIT", "PEBS": "2", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts when a memory store of a uop spans a page boundary (a split) is retired.", "SampleAfterValue": "200003", "UMask": "0x4"
tools/perf/pmu-events/arch/x86/goldmontplus/other.json +0 -20
@@ -1,59 +1,39 @@ [ { "BriefDescription": "Cycles code-fetch stalled due to any reason.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x86", "EventName": "FETCH_STALL.ALL", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts cycles that fetch is stalled due to any reason. That is, the decoder queue is able to accept bytes, but the fetch unit is unable to provide bytes. This will include cycles due to an ITLB miss, ICache miss and other events.", "SampleAfterValue": "200003" }, { "BriefDescription": "Cycles the code-fetch stalls and an ITLB miss is outstanding.", - "CollectPEBSRecord": "1", - "Counter": "0,1,2,3", "EventCode": "0x86", "EventName": "FETCH_STALL.ITLB_FILL_PENDING_CYCLES", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts cycles that fetch is stalled due to an outstanding ITLB miss. That is, the decoder queue is able to accept bytes, but the fetch unit is unable to provide bytes due to an ITLB miss. Note: this event is not the same as page walk cycles to retrieve an instruction translation.", "SampleAfterValue": "200003", "UMask": "0x1" }, { "BriefDescription": "Cycles hardware interrupts are masked", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xCB", "EventName": "HW_INTERRUPTS.MASKED", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of core cycles during which interrupts are masked (disabled). Increments by 1 each core cycle that EFLAGS.IF is 0, regardless of whether interrupts are pending or not.", "SampleAfterValue": "200003", "UMask": "0x2" }, { "BriefDescription": "Cycles pending interrupts are masked", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xCB", "EventName": "HW_INTERRUPTS.PENDING_AND_MASKED", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts core cycles during which there are pending interrupts, but interrupts are masked (EFLAGS.IF = 0).", "SampleAfterValue": "200003", "UMask": "0x4" }, { "BriefDescription": "Hardware interrupts received", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xCB", "EventName": "HW_INTERRUPTS.RECEIVED", - "PDIR_COUNTER": "na", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts hardware interrupts received by the processor.", "SampleAfterValue": "203", "UMask": "0x1"
tools/perf/pmu-events/arch/x86/goldmontplus/pipeline.json +0 -143
490 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/goldmontplus/virtual-memory.json +0 -69
219 lines not on this page · raw message
Signature · 1 line
2.39.0.314.g84b9a713c41-goog
Ian Rogers
reviewerPATCH 12/32 perf vendor events intel: Refresh haswell metrics and events
In reply to Ian RogersUpdate the haswell metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses, use of exponents and removal of redundant operations like "* 1". The events are unchanged but unused json values are removed. The formatting changes increase consistency across the json files.
--- .../pmu-events/arch/x86/haswell/cache.json | 211 -------------- .../arch/x86/haswell/floating-point.json | 20 -- .../pmu-events/arch/x86/haswell/frontend.json | 58 ---- .../arch/x86/haswell/hsw-metrics.json | 117 ++++---- .../pmu-events/arch/x86/haswell/memory.json | 149 ---------- .../pmu-events/arch/x86/haswell/other.json | 8 - .../pmu-events/arch/x86/haswell/pipeline.json | 258 ------------------ .../arch/x86/haswell/uncore-cache.json | 50 ---- .../arch/x86/haswell/uncore-other.json | 21 +- .../arch/x86/haswell/virtual-memory.json | 98 ------- 10 files changed, 73 insertions(+), 917 deletions(-)
tools/perf/pmu-events/arch/x86/haswell/cache.json +0 -211
@@ -1,8 +1,6 @@ [ { "BriefDescription": "L1D data line replacements", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x51", "EventName": "L1D.REPLACEMENT", "PublicDescription": "This event counts when new data lines are brought into the L1 Data cache, which cause other lines to be evicted from the cache.",
@@ -11,8 +9,6 @@ }, { "BriefDescription": "Cycles a demand request was blocked due to Fill Buffers inavailability.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.FB_FULL",
@@ -21,8 +17,6 @@ }, { "BriefDescription": "L1D miss outstanding duration in cycles", - "Counter": "2", - "CounterHTOff": "2", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.PENDING", "PublicDescription": "Increments the number of outstanding L1D misses every cycle. Set Cmask = 1 and Edge =1 to count occurrences.",
@@ -31,8 +25,6 @@ }, { "BriefDescription": "Cycles with L1D load Misses outstanding.", - "Counter": "2", - "CounterHTOff": "2", "CounterMask": "1", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.PENDING_CYCLES",
@@ -42,8 +34,6 @@ { "AnyThread": "1", "BriefDescription": "Cycles with L1D load Misses outstanding from any thread on physical core.", - "Counter": "2", - "CounterHTOff": "2", "CounterMask": "1", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.PENDING_CYCLES_ANY",
@@ -52,8 +42,6 @@ }, { "BriefDescription": "Number of times a request needed a FB entry but there was no entry available for it. That is the FB unavailability was dominant reason for blocking the request. A request includes cacheable/uncacheable demands that is load, store or SW prefetch. HWP are e.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.REQUEST_FB_FULL", "SampleAfterValue": "2000003",
@@ -61,8 +49,6 @@ }, { "BriefDescription": "Not rejected writebacks that hit L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x27", "EventName": "L2_DEMAND_RQSTS.WB_HIT", "PublicDescription": "Not rejected writebacks that hit L2 cache.",
@@ -71,8 +57,6 @@ }, { "BriefDescription": "L2 cache lines filling L2", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF1", "EventName": "L2_LINES_IN.ALL", "PublicDescription": "This event counts the number of L2 cache lines brought into the L2 cache. Lines are filled into the L2 cache when there was an L2 miss.",
@@ -81,8 +65,6 @@ }, { "BriefDescription": "L2 cache lines in E state filling L2", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF1", "EventName": "L2_LINES_IN.E", "PublicDescription": "L2 cache lines in E state filling L2.",
@@ -91,8 +73,6 @@ }, { "BriefDescription": "L2 cache lines in I state filling L2", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF1", "EventName": "L2_LINES_IN.I", "PublicDescription": "L2 cache lines in I state filling L2.",
@@ -101,8 +81,6 @@ }, { "BriefDescription": "L2 cache lines in S state filling L2", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF1", "EventName": "L2_LINES_IN.S", "PublicDescription": "L2 cache lines in S state filling L2.",
@@ -111,8 +89,6 @@ }, { "BriefDescription": "Clean L2 cache lines evicted by demand", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.DEMAND_CLEAN", "PublicDescription": "Clean L2 cache lines evicted by demand.",
@@ -121,8 +97,6 @@ }, { "BriefDescription": "Dirty L2 cache lines evicted by demand", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.DEMAND_DIRTY", "PublicDescription": "Dirty L2 cache lines evicted by demand.",
@@ -131,8 +105,6 @@ }, { "BriefDescription": "L2 code requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_CODE_RD", "PublicDescription": "Counts all L2 code requests.",
@@ -141,8 +113,6 @@ }, { "BriefDescription": "Demand Data Read requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD78, HSM80", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_DEMAND_DATA_RD",
@@ -152,8 +122,6 @@ }, { "BriefDescription": "Demand requests that miss L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD78, HSM80", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_DEMAND_MISS",
@@ -163,8 +131,6 @@ }, { "BriefDescription": "Demand requests to L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD78, HSM80", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_DEMAND_REFERENCES",
@@ -174,8 +140,6 @@ }, { "BriefDescription": "Requests from L2 hardware prefetchers", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_PF", "PublicDescription": "Counts all L2 HW prefetcher requests.",
@@ -184,8 +148,6 @@ }, { "BriefDescription": "RFO requests to L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_RFO", "PublicDescription": "Counts all L2 store RFO requests.",
@@ -194,8 +156,6 @@ }, { "BriefDescription": "L2 cache hits when fetching instructions, code reads.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.CODE_RD_HIT", "PublicDescription": "Number of instruction fetches that hit the L2 cache.",
@@ -204,8 +164,6 @@ }, { "BriefDescription": "L2 cache misses when fetching instructions", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.CODE_RD_MISS", "PublicDescription": "Number of instruction fetches that missed the L2 cache.",
@@ -214,8 +172,6 @@ }, { "BriefDescription": "Demand Data Read requests that hit L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD78, HSM80", "EventCode": "0x24", "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT",
@@ -225,8 +181,6 @@ }, { "BriefDescription": "Demand Data Read miss L2, no rejects", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD78, HSM80", "EventCode": "0x24", "EventName": "L2_RQSTS.DEMAND_DATA_RD_MISS",
@@ -236,8 +190,6 @@ }, { "BriefDescription": "L2 prefetch requests that hit L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.L2_PF_HIT", "PublicDescription": "Counts all L2 HW prefetcher requests that hit L2.",
@@ -246,8 +198,6 @@ }, { "BriefDescription": "L2 prefetch requests that miss L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.L2_PF_MISS", "PublicDescription": "Counts all L2 HW prefetcher requests that missed L2.",
@@ -256,8 +206,6 @@ }, { "BriefDescription": "All requests that miss L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD78, HSM80", "EventCode": "0x24", "EventName": "L2_RQSTS.MISS",
@@ -267,8 +215,6 @@ }, { "BriefDescription": "All L2 requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD78, HSM80", "EventCode": "0x24", "EventName": "L2_RQSTS.REFERENCES",
@@ -278,8 +224,6 @@ }, { "BriefDescription": "RFO requests that hit L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.RFO_HIT", "PublicDescription": "Counts the number of store RFO requests that hit the L2 cache.",
@@ -288,8 +232,6 @@ }, { "BriefDescription": "RFO requests that miss L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.RFO_MISS", "PublicDescription": "Counts the number of store RFO requests that miss the L2 cache.",
@@ -298,8 +240,6 @@ }, { "BriefDescription": "L2 or L3 HW prefetches that access L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xf0", "EventName": "L2_TRANS.ALL_PF", "PublicDescription": "Any MLC or L3 HW prefetch accessing L2, including rejects.",
@@ -308,8 +248,6 @@ }, { "BriefDescription": "Transactions accessing L2 pipe", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xf0", "EventName": "L2_TRANS.ALL_REQUESTS", "PublicDescription": "Transactions accessing L2 pipe.",
@@ -318,8 +256,6 @@ }, { "BriefDescription": "L2 cache accesses when fetching instructions", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xf0", "EventName": "L2_TRANS.CODE_RD", "PublicDescription": "L2 cache accesses when fetching instructions.",
@@ -328,8 +264,6 @@ }, { "BriefDescription": "Demand Data Read requests that access L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xf0", "EventName": "L2_TRANS.DEMAND_DATA_RD", "PublicDescription": "Demand data read requests that access L2 cache.",
@@ -338,8 +272,6 @@ }, { "BriefDescription": "L1D writebacks that access L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xf0", "EventName": "L2_TRANS.L1D_WB", "PublicDescription": "L1D writebacks that access L2 cache.",
@@ -348,8 +280,6 @@ }, { "BriefDescription": "L2 fill requests that access L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xf0", "EventName": "L2_TRANS.L2_FILL", "PublicDescription": "L2 fill requests that access L2 cache.",
@@ -358,8 +288,6 @@ }, { "BriefDescription": "L2 writebacks that access L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xf0", "EventName": "L2_TRANS.L2_WB", "PublicDescription": "L2 writebacks that access L2 cache.",
@@ -368,8 +296,6 @@ }, { "BriefDescription": "RFO requests that access L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xf0", "EventName": "L2_TRANS.RFO", "PublicDescription": "RFO requests that access L2 cache.",
@@ -378,8 +304,6 @@ }, { "BriefDescription": "Cycles when L1D is locked", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x63", "EventName": "LOCK_CYCLES.CACHE_LOCK_DURATION", "PublicDescription": "Cycles in which the L1D is locked.",
@@ -388,8 +312,6 @@ }, { "BriefDescription": "Core-originated cacheable demand requests missed L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x2E", "EventName": "LONGEST_LAT_CACHE.MISS", "PublicDescription": "This event counts each cache miss condition for references to the last level cache.",
@@ -398,8 +320,6 @@ }, { "BriefDescription": "Core-originated cacheable demand requests that refer to L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x2E", "EventName": "LONGEST_LAT_CACHE.REFERENCE", "PublicDescription": "This event counts requests originating from the core that reference a cache line in the last level cache.",
@@ -408,8 +328,6 @@ }, { "BriefDescription": "Retired load uops which data sources were L3 and cross-core snoop hits in on-pkg core cache.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD29, HSD25, HSM26, HSM30", "EventCode": "0xD2",
@@ -420,8 +338,6 @@ }, { "BriefDescription": "Retired load uops which data sources were HitM responses from shared L3.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD29, HSD25, HSM26, HSM30", "EventCode": "0xD2",
@@ -432,8 +348,6 @@ }, { "BriefDescription": "Retired load uops which data sources were L3 hit and cross-core snoop missed in on-pkg core cache.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD29, HSD25, HSM26, HSM30", "EventCode": "0xD2",
@@ -444,8 +358,6 @@ }, { "BriefDescription": "Retired load uops which data sources were hits in L3 without snoops required.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD74, HSD29, HSD25, HSM26, HSM30", "EventCode": "0xD2",
@@ -456,8 +368,6 @@ }, { "BriefDescription": "Data from local DRAM either Snoop not needed or Snoop Miss (RspI)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD74, HSD29, HSD25, HSM30", "EventCode": "0xD3",
@@ -469,8 +379,6 @@ }, { "BriefDescription": "Retired load uops which data sources were load uops missed L1 but hit FB due to preceding miss to the same cache line with data not ready.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSM30", "EventCode": "0xD1",
@@ -481,8 +389,6 @@ }, { "BriefDescription": "Retired load uops with L1 cache hits as data sources.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD29, HSM30", "EventCode": "0xD1",
@@ -493,8 +399,6 @@ }, { "BriefDescription": "Retired load uops misses in L1 cache as data sources.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSM30", "EventCode": "0xD1",
@@ -506,8 +410,6 @@ }, { "BriefDescription": "Retired load uops with L2 cache hits as data sources.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD76, HSD29, HSM30", "EventCode": "0xD1",
@@ -518,8 +420,6 @@ }, { "BriefDescription": "Miss in mid-level (L2) cache. Excludes Unknown data-source.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD29, HSM30", "EventCode": "0xD1",
@@ -531,8 +431,6 @@ }, { "BriefDescription": "Retired load uops which data sources were data hits in L3 without snoops required.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD74, HSD29, HSD25, HSM26, HSM30", "EventCode": "0xD1",
@@ -544,8 +442,6 @@ }, { "BriefDescription": "Miss in last-level (L3) cache. Excludes Unknown data-source.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD74, HSD29, HSD25, HSM26, HSM30", "EventCode": "0xD1",
@@ -557,8 +453,6 @@ }, { "BriefDescription": "Retired load uops.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD29, HSM30", "EventCode": "0xD0",
@@ -570,13 +464,10 @@ }, { "BriefDescription": "Retired store uops.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD29, HSM30", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.ALL_STORES", - "L1_Hit_Indication": "1", "PEBS": "1", "PublicDescription": "Counts all retired store uops.", "SampleAfterValue": "2000003",
@@ -584,8 +475,6 @@ }, { "BriefDescription": "Retired load uops with locked access.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD76, HSD29, HSM30", "EventCode": "0xD0",
@@ -596,8 +485,6 @@ }, { "BriefDescription": "Retired load uops that split across a cacheline boundary.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD29, HSM30", "EventCode": "0xD0",
@@ -608,21 +495,16 @@ }, { "BriefDescription": "Retired store uops that split across a cacheline boundary.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD29, HSM30", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.SPLIT_STORES", - "L1_Hit_Indication": "1", "PEBS": "1", "SampleAfterValue": "100003", "UMask": "0x42" }, { "BriefDescription": "Retired load uops that miss the STLB.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD29, HSM30", "EventCode": "0xD0",
@@ -633,21 +515,16 @@ }, { "BriefDescription": "Retired store uops that miss the STLB.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD29, HSM30", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.STLB_MISS_STORES", - "L1_Hit_Indication": "1", "PEBS": "1", "SampleAfterValue": "100003", "UMask": "0x12" }, { "BriefDescription": "Demand and prefetch data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.ALL_DATA_RD", "PublicDescription": "Data read requests sent to uncore (demand and prefetch).",
@@ -656,8 +533,6 @@ }, { "BriefDescription": "Cacheable and noncacheable code read requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.DEMAND_CODE_RD", "PublicDescription": "Demand code read requests sent to uncore.",
@@ -666,8 +541,6 @@ }, { "BriefDescription": "Demand Data Read requests sent to uncore", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD78, HSM80", "EventCode": "0xb0", "EventName": "OFFCORE_REQUESTS.DEMAND_DATA_RD",
@@ -677,8 +550,6 @@ }, { "BriefDescription": "Demand RFO requests including regular RFOs, locks, ItoM", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.DEMAND_RFO", "PublicDescription": "Demand RFO read requests sent to uncore, including regular RFOs, locks, ItoM.",
@@ -687,8 +558,6 @@ }, { "BriefDescription": "Offcore requests buffer cannot take more entries for this thread core.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xb2", "EventName": "OFFCORE_REQUESTS_BUFFER.SQ_FULL", "SampleAfterValue": "2000003",
@@ -696,8 +565,6 @@ }, { "BriefDescription": "Offcore outstanding cacheable Core Data Read transactions in SuperQueue (SQ), queue to uncore", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD62, HSD61, HSM63", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD",
@@ -707,8 +574,6 @@ }, { "BriefDescription": "Cycles when offcore outstanding cacheable Core Data Read transactions are present in SuperQueue (SQ), queue to uncore.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "Errata": "HSD62, HSD61, HSM63", "EventCode": "0x60",
@@ -718,8 +583,6 @@ }, { "BriefDescription": "Cycles when offcore outstanding Demand Data Read transactions are present in SuperQueue (SQ), queue to uncore.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "Errata": "HSD78, HSD62, HSD61, HSM63, HSM80", "EventCode": "0x60",
@@ -729,8 +592,6 @@ }, { "BriefDescription": "Offcore outstanding demand rfo reads transactions in SuperQueue (SQ), queue to uncore, every cycle.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "Errata": "HSD62, HSD61, HSM63", "EventCode": "0x60",
@@ -740,8 +601,6 @@ }, { "BriefDescription": "Offcore outstanding code reads transactions in SuperQueue (SQ), queue to uncore, every cycle", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD62, HSD61, HSM63", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_CODE_RD",
@@ -751,8 +610,6 @@ }, { "BriefDescription": "Offcore outstanding Demand Data Read transactions in uncore queue.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD78, HSD62, HSD61, HSM63, HSM80", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD",
@@ -762,8 +619,6 @@ }, { "BriefDescription": "Cycles with at least 6 offcore outstanding Demand Data Read transactions in uncore queue.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "6", "Errata": "HSD78, HSD62, HSD61, HSM63, HSM80", "EventCode": "0x60",
@@ -773,8 +628,6 @@ }, { "BriefDescription": "Offcore outstanding RFO store transactions in SuperQueue (SQ), queue to uncore", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD62, HSD61, HSM63", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_RFO",
@@ -784,8 +637,6 @@ }, { "BriefDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE", "SampleAfterValue": "100003",
@@ -793,248 +644,186 @@ }, { "BriefDescription": "Counts all demand & prefetch code readshit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0244", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch data readshit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0091", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch data readshit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0091", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C07F7", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C07F7", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all requestshit in the L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_REQUESTS.L3_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C8FFF", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch RFOshit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0122", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch RFOshit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0122", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code readshit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code readshit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data readshit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data readshit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to LLC only) code readshit in the L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L3_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0040", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to L2) data readshit in the L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to L2) RFOshit in the L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to LLC only) code readshit in the L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L3_CODE_RD.L3_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0200", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to LLC only) data readshit in the L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0080", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOshit in the L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0100", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Split locks in SQ", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xf4", "EventName": "SQ_MISC.SPLIT_LOCK", "SampleAfterValue": "100003",
tools/perf/pmu-events/arch/x86/haswell/floating-point.json +0 -20
@@ -1,8 +1,6 @@ [ { "BriefDescription": "Approximate counts of AVX & AVX2 256-bit instructions, including non-arithmetic instructions, loads, and stores. May count non-AVX instructions that employ 256-bit operations, including (but not necessarily limited to) rep string instructions that use 256-bit loads and stores for optimized performance, XSAVE* and XRSTOR*, and operations that transition the x87 FPU data registers between x87 and MMX.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xC6", "EventName": "AVX_INSTS.ALL", "PublicDescription": "Note that a whole rep string only counts AVX_INST.ALL once.",
@@ -11,8 +9,6 @@ }, { "BriefDescription": "Cycles with any input/output SSE or FP assist", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "CounterMask": "1", "EventCode": "0xCA", "EventName": "FP_ASSIST.ANY",
@@ -22,8 +18,6 @@ }, { "BriefDescription": "Number of SIMD FP assists due to input values", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xCA", "EventName": "FP_ASSIST.SIMD_INPUT", "PublicDescription": "Number of SIMD FP assists due to input values.",
@@ -32,8 +26,6 @@ }, { "BriefDescription": "Number of SIMD FP assists due to Output values", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xCA", "EventName": "FP_ASSIST.SIMD_OUTPUT", "PublicDescription": "Number of SIMD FP assists due to output values.",
@@ -42,8 +34,6 @@ }, { "BriefDescription": "Number of X87 assists due to input value.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xCA", "EventName": "FP_ASSIST.X87_INPUT", "PublicDescription": "Number of X87 FP assists due to input values.",
@@ -52,8 +42,6 @@ }, { "BriefDescription": "Number of X87 assists due to output value.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xCA", "EventName": "FP_ASSIST.X87_OUTPUT", "PublicDescription": "Number of X87 FP assists due to output values.",
@@ -62,8 +50,6 @@ }, { "BriefDescription": "Number of SIMD Move Elimination candidate uops that were eliminated.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x58", "EventName": "MOVE_ELIMINATION.SIMD_ELIMINATED", "PublicDescription": "Number of SIMD move elimination candidate uops that were eliminated.",
@@ -72,8 +58,6 @@ }, { "BriefDescription": "Number of SIMD Move Elimination candidate uops that were not eliminated.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x58", "EventName": "MOVE_ELIMINATION.SIMD_NOT_ELIMINATED", "PublicDescription": "Number of SIMD move elimination candidate uops that were not eliminated.",
@@ -82,8 +66,6 @@ }, { "BriefDescription": "Number of transitions from AVX-256 to legacy SSE when penalty applicable.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD56, HSM57", "EventCode": "0xC1", "EventName": "OTHER_ASSISTS.AVX_TO_SSE",
@@ -92,8 +74,6 @@ }, { "BriefDescription": "Number of transitions from SSE to AVX-256 when penalty applicable.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD56, HSM57", "EventCode": "0xC1", "EventName": "OTHER_ASSISTS.SSE_TO_AVX",
tools/perf/pmu-events/arch/x86/haswell/frontend.json +0 -58
232 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/haswell/hsw-metrics.json +68 -49
354 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/haswell/memory.json +0 -149
604 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/haswell/other.json +0 -8
@@ -1,8 +1,6 @@ [ { "BriefDescription": "Unhalted core cycles when the thread is in ring 0", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x5C", "EventName": "CPL_CYCLES.RING0", "PublicDescription": "Unhalted core cycles when the thread is in ring 0.",
@@ -11,8 +9,6 @@ }, { "BriefDescription": "Number of intervals between processor halts while thread is in ring 0.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EdgeDetect": "1", "EventCode": "0x5C",
@@ -22,8 +18,6 @@ }, { "BriefDescription": "Unhalted core cycles when thread is in rings 1, 2, or 3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x5C", "EventName": "CPL_CYCLES.RING123", "PublicDescription": "Unhalted core cycles when the thread is not in ring 0.",
@@ -32,8 +26,6 @@ }, { "BriefDescription": "Cycles when L1 and L2 are locked due to UC or split lock", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x63", "EventName": "LOCK_CYCLES.SPLIT_LOCK_UC_LOCK_DURATION", "PublicDescription": "Cycles in which the L1D and L2 are locked, due to a UC lock or split lock.",
tools/perf/pmu-events/arch/x86/haswell/pipeline.json +0 -258
851 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/haswell/uncore-cache.json +0 -50
50 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/haswell/uncore-other.json +5 -16
Lines of this file are not shown. View the raw message.
tools/perf/pmu-events/arch/x86/haswell/virtual-memory.json +0 -98
98 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.39.0.314.g84b9a713c41-goog
Part of the diff is not shown here. View the raw message.
Ian Rogers
reviewerPATCH 13/32 perf vendor events intel: Refresh haswellx metrics and events
In reply to Ian RogersUpdate the haswellx metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses, use of exponents and removal of redundant operations like "* 1". The order of metrics varies as TMA metrics are first converted and then removed if perfmon versions are found. The events are updated with fixes to uncore events and improved descriptions. The formatting changes increase consistency across the json files.
--- .../pmu-events/arch/x86/haswellx/cache.json | 217 -- .../arch/x86/haswellx/floating-point.json | 20 - .../arch/x86/haswellx/frontend.json | 58 - .../arch/x86/haswellx/hsx-metrics.json | 1467 +++++----- .../pmu-events/arch/x86/haswellx/memory.json | 170 -- .../pmu-events/arch/x86/haswellx/other.json | 8 - .../arch/x86/haswellx/pipeline.json | 258 -- .../arch/x86/haswellx/uncore-cache.json | 2448 ++++++++--------- .../x86/haswellx/uncore-interconnect.json | 722 ++--- .../arch/x86/haswellx/uncore-memory.json | 2037 +++++++------- .../arch/x86/haswellx/uncore-other.json | 1834 ++++++------ .../arch/x86/haswellx/uncore-power.json | 150 +- .../arch/x86/haswellx/virtual-memory.json | 98 - 13 files changed, 4206 insertions(+), 5281 deletions(-)
tools/perf/pmu-events/arch/x86/haswellx/cache.json +0 -217
@@ -1,8 +1,6 @@ [ { "BriefDescription": "L1D data line replacements", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x51", "EventName": "L1D.REPLACEMENT", "PublicDescription": "This event counts when new data lines are brought into the L1 Data cache, which cause other lines to be evicted from the cache.",
@@ -11,8 +9,6 @@ }, { "BriefDescription": "Cycles a demand request was blocked due to Fill Buffers inavailability.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.FB_FULL",
@@ -21,8 +17,6 @@ }, { "BriefDescription": "L1D miss outstanding duration in cycles", - "Counter": "2", - "CounterHTOff": "2", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.PENDING", "PublicDescription": "Increments the number of outstanding L1D misses every cycle. Set Cmask = 1 and Edge =1 to count occurrences.",
@@ -31,8 +25,6 @@ }, { "BriefDescription": "Cycles with L1D load Misses outstanding.", - "Counter": "2", - "CounterHTOff": "2", "CounterMask": "1", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.PENDING_CYCLES",
@@ -42,8 +34,6 @@ { "AnyThread": "1", "BriefDescription": "Cycles with L1D load Misses outstanding from any thread on physical core.", - "Counter": "2", - "CounterHTOff": "2", "CounterMask": "1", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.PENDING_CYCLES_ANY",
@@ -52,8 +42,6 @@ }, { "BriefDescription": "Number of times a request needed a FB entry but there was no entry available for it. That is the FB unavailability was dominant reason for blocking the request. A request includes cacheable/uncacheable demands that is load, store or SW prefetch. HWP are e.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.REQUEST_FB_FULL", "SampleAfterValue": "2000003",
@@ -61,8 +49,6 @@ }, { "BriefDescription": "Not rejected writebacks that hit L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x27", "EventName": "L2_DEMAND_RQSTS.WB_HIT", "PublicDescription": "Not rejected writebacks that hit L2 cache.",
@@ -71,8 +57,6 @@ }, { "BriefDescription": "L2 cache lines filling L2", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF1", "EventName": "L2_LINES_IN.ALL", "PublicDescription": "This event counts the number of L2 cache lines brought into the L2 cache. Lines are filled into the L2 cache when there was an L2 miss.",
@@ -81,8 +65,6 @@ }, { "BriefDescription": "L2 cache lines in E state filling L2", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF1", "EventName": "L2_LINES_IN.E", "PublicDescription": "L2 cache lines in E state filling L2.",
@@ -91,8 +73,6 @@ }, { "BriefDescription": "L2 cache lines in I state filling L2", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF1", "EventName": "L2_LINES_IN.I", "PublicDescription": "L2 cache lines in I state filling L2.",
@@ -101,8 +81,6 @@ }, { "BriefDescription": "L2 cache lines in S state filling L2", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF1", "EventName": "L2_LINES_IN.S", "PublicDescription": "L2 cache lines in S state filling L2.",
@@ -111,8 +89,6 @@ }, { "BriefDescription": "Clean L2 cache lines evicted by demand", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.DEMAND_CLEAN", "PublicDescription": "Clean L2 cache lines evicted by demand.",
@@ -121,8 +97,6 @@ }, { "BriefDescription": "Dirty L2 cache lines evicted by demand", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.DEMAND_DIRTY", "PublicDescription": "Dirty L2 cache lines evicted by demand.",
@@ -131,8 +105,6 @@ }, { "BriefDescription": "L2 code requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_CODE_RD", "PublicDescription": "Counts all L2 code requests.",
@@ -141,8 +113,6 @@ }, { "BriefDescription": "Demand Data Read requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD78, HSM80", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_DEMAND_DATA_RD",
@@ -152,8 +122,6 @@ }, { "BriefDescription": "Demand requests that miss L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD78, HSM80", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_DEMAND_MISS",
@@ -163,8 +131,6 @@ }, { "BriefDescription": "Demand requests to L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD78, HSM80", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_DEMAND_REFERENCES",
@@ -174,8 +140,6 @@ }, { "BriefDescription": "Requests from L2 hardware prefetchers", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_PF", "PublicDescription": "Counts all L2 HW prefetcher requests.",
@@ -184,8 +148,6 @@ }, { "BriefDescription": "RFO requests to L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_RFO", "PublicDescription": "Counts all L2 store RFO requests.",
@@ -194,8 +156,6 @@ }, { "BriefDescription": "L2 cache hits when fetching instructions, code reads.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.CODE_RD_HIT", "PublicDescription": "Number of instruction fetches that hit the L2 cache.",
@@ -204,8 +164,6 @@ }, { "BriefDescription": "L2 cache misses when fetching instructions", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.CODE_RD_MISS", "PublicDescription": "Number of instruction fetches that missed the L2 cache.",
@@ -214,8 +172,6 @@ }, { "BriefDescription": "Demand Data Read requests that hit L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD78, HSM80", "EventCode": "0x24", "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT",
@@ -225,8 +181,6 @@ }, { "BriefDescription": "Demand Data Read miss L2, no rejects", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD78, HSM80", "EventCode": "0x24", "EventName": "L2_RQSTS.DEMAND_DATA_RD_MISS",
@@ -236,8 +190,6 @@ }, { "BriefDescription": "L2 prefetch requests that hit L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.L2_PF_HIT", "PublicDescription": "Counts all L2 HW prefetcher requests that hit L2.",
@@ -246,8 +198,6 @@ }, { "BriefDescription": "L2 prefetch requests that miss L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.L2_PF_MISS", "PublicDescription": "Counts all L2 HW prefetcher requests that missed L2.",
@@ -256,8 +206,6 @@ }, { "BriefDescription": "All requests that miss L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD78, HSM80", "EventCode": "0x24", "EventName": "L2_RQSTS.MISS",
@@ -267,8 +215,6 @@ }, { "BriefDescription": "All L2 requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD78, HSM80", "EventCode": "0x24", "EventName": "L2_RQSTS.REFERENCES",
@@ -278,8 +224,6 @@ }, { "BriefDescription": "RFO requests that hit L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.RFO_HIT", "PublicDescription": "Counts the number of store RFO requests that hit the L2 cache.",
@@ -288,8 +232,6 @@ }, { "BriefDescription": "RFO requests that miss L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.RFO_MISS", "PublicDescription": "Counts the number of store RFO requests that miss the L2 cache.",
@@ -298,8 +240,6 @@ }, { "BriefDescription": "L2 or L3 HW prefetches that access L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xf0", "EventName": "L2_TRANS.ALL_PF", "PublicDescription": "Any MLC or L3 HW prefetch accessing L2, including rejects.",
@@ -308,8 +248,6 @@ }, { "BriefDescription": "Transactions accessing L2 pipe", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xf0", "EventName": "L2_TRANS.ALL_REQUESTS", "PublicDescription": "Transactions accessing L2 pipe.",
@@ -318,8 +256,6 @@ }, { "BriefDescription": "L2 cache accesses when fetching instructions", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xf0", "EventName": "L2_TRANS.CODE_RD", "PublicDescription": "L2 cache accesses when fetching instructions.",
@@ -328,8 +264,6 @@ }, { "BriefDescription": "Demand Data Read requests that access L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xf0", "EventName": "L2_TRANS.DEMAND_DATA_RD", "PublicDescription": "Demand data read requests that access L2 cache.",
@@ -338,8 +272,6 @@ }, { "BriefDescription": "L1D writebacks that access L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xf0", "EventName": "L2_TRANS.L1D_WB", "PublicDescription": "L1D writebacks that access L2 cache.",
@@ -348,8 +280,6 @@ }, { "BriefDescription": "L2 fill requests that access L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xf0", "EventName": "L2_TRANS.L2_FILL", "PublicDescription": "L2 fill requests that access L2 cache.",
@@ -358,8 +288,6 @@ }, { "BriefDescription": "L2 writebacks that access L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xf0", "EventName": "L2_TRANS.L2_WB", "PublicDescription": "L2 writebacks that access L2 cache.",
@@ -368,8 +296,6 @@ }, { "BriefDescription": "RFO requests that access L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xf0", "EventName": "L2_TRANS.RFO", "PublicDescription": "RFO requests that access L2 cache.",
@@ -378,8 +304,6 @@ }, { "BriefDescription": "Cycles when L1D is locked", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x63", "EventName": "LOCK_CYCLES.CACHE_LOCK_DURATION", "PublicDescription": "Cycles in which the L1D is locked.",
@@ -388,8 +312,6 @@ }, { "BriefDescription": "Core-originated cacheable demand requests missed L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x2E", "EventName": "LONGEST_LAT_CACHE.MISS", "PublicDescription": "This event counts each cache miss condition for references to the last level cache.",
@@ -398,8 +320,6 @@ }, { "BriefDescription": "Core-originated cacheable demand requests that refer to L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x2E", "EventName": "LONGEST_LAT_CACHE.REFERENCE", "PublicDescription": "This event counts requests originating from the core that reference a cache line in the last level cache.",
@@ -408,8 +328,6 @@ }, { "BriefDescription": "Retired load uops which data sources were L3 and cross-core snoop hits in on-pkg core cache.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD29, HSD25, HSM26, HSM30", "EventCode": "0xD2",
@@ -420,8 +338,6 @@ }, { "BriefDescription": "Retired load uops which data sources were HitM responses from shared L3.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD29, HSD25, HSM26, HSM30", "EventCode": "0xD2",
@@ -432,8 +348,6 @@ }, { "BriefDescription": "Retired load uops which data sources were L3 hit and cross-core snoop missed in on-pkg core cache.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD29, HSD25, HSM26, HSM30", "EventCode": "0xD2",
@@ -444,8 +358,6 @@ }, { "BriefDescription": "Retired load uops which data sources were hits in L3 without snoops required.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD74, HSD29, HSD25, HSM26, HSM30", "EventCode": "0xD2",
@@ -456,8 +368,6 @@ }, { "BriefDescription": "Data from local DRAM either Snoop not needed or Snoop Miss (RspI)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD74, HSD29, HSD25, HSM30", "EventCode": "0xD3",
@@ -469,8 +379,6 @@ }, { "BriefDescription": "Retired load uop whose Data Source was: remote DRAM either Snoop not needed or Snoop Miss (RspI)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD29, HSM30", "EventCode": "0xD3",
@@ -481,8 +389,6 @@ }, { "BriefDescription": "Retired load uop whose Data Source was: forwarded from remote cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSM30", "EventCode": "0xD3",
@@ -493,8 +399,6 @@ }, { "BriefDescription": "Retired load uop whose Data Source was: Remote cache HITM", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSM30", "EventCode": "0xD3",
@@ -505,8 +409,6 @@ }, { "BriefDescription": "Retired load uops which data sources were load uops missed L1 but hit FB due to preceding miss to the same cache line with data not ready.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSM30", "EventCode": "0xD1",
@@ -517,8 +419,6 @@ }, { "BriefDescription": "Retired load uops with L1 cache hits as data sources.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD29, HSM30", "EventCode": "0xD1",
@@ -529,8 +429,6 @@ }, { "BriefDescription": "Retired load uops misses in L1 cache as data sources.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSM30", "EventCode": "0xD1",
@@ -542,8 +440,6 @@ }, { "BriefDescription": "Retired load uops with L2 cache hits as data sources.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD76, HSD29, HSM30", "EventCode": "0xD1",
@@ -554,8 +450,6 @@ }, { "BriefDescription": "Miss in mid-level (L2) cache. Excludes Unknown data-source.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD29, HSM30", "EventCode": "0xD1",
@@ -567,8 +461,6 @@ }, { "BriefDescription": "Retired load uops which data sources were data hits in L3 without snoops required.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD74, HSD29, HSD25, HSM26, HSM30", "EventCode": "0xD1",
@@ -580,8 +472,6 @@ }, { "BriefDescription": "Miss in last-level (L3) cache. Excludes Unknown data-source.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD74, HSD29, HSD25, HSM26, HSM30", "EventCode": "0xD1",
@@ -593,8 +483,6 @@ }, { "BriefDescription": "Retired load uops.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD29, HSM30", "EventCode": "0xD0",
@@ -606,13 +494,10 @@ }, { "BriefDescription": "Retired store uops.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD29, HSM30", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.ALL_STORES", - "L1_Hit_Indication": "1", "PEBS": "1", "PublicDescription": "Counts all retired store uops.", "SampleAfterValue": "2000003",
@@ -620,8 +505,6 @@ }, { "BriefDescription": "Retired load uops with locked access.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD76, HSD29, HSM30", "EventCode": "0xD0",
@@ -632,8 +515,6 @@ }, { "BriefDescription": "Retired load uops that split across a cacheline boundary.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD29, HSM30", "EventCode": "0xD0",
@@ -644,21 +525,16 @@ }, { "BriefDescription": "Retired store uops that split across a cacheline boundary.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD29, HSM30", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.SPLIT_STORES", - "L1_Hit_Indication": "1", "PEBS": "1", "SampleAfterValue": "100003", "UMask": "0x42" }, { "BriefDescription": "Retired load uops that miss the STLB.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD29, HSM30", "EventCode": "0xD0",
@@ -669,21 +545,16 @@ }, { "BriefDescription": "Retired store uops that miss the STLB.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "Errata": "HSD29, HSM30", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.STLB_MISS_STORES", - "L1_Hit_Indication": "1", "PEBS": "1", "SampleAfterValue": "100003", "UMask": "0x12" }, { "BriefDescription": "Demand and prefetch data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.ALL_DATA_RD", "PublicDescription": "Data read requests sent to uncore (demand and prefetch).",
@@ -692,8 +563,6 @@ }, { "BriefDescription": "Cacheable and noncacheable code read requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.DEMAND_CODE_RD", "PublicDescription": "Demand code read requests sent to uncore.",
@@ -702,8 +571,6 @@ }, { "BriefDescription": "Demand Data Read requests sent to uncore", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD78, HSM80", "EventCode": "0xb0", "EventName": "OFFCORE_REQUESTS.DEMAND_DATA_RD",
@@ -713,8 +580,6 @@ }, { "BriefDescription": "Demand RFO requests including regular RFOs, locks, ItoM", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.DEMAND_RFO", "PublicDescription": "Demand RFO read requests sent to uncore, including regular RFOs, locks, ItoM.",
@@ -723,8 +588,6 @@ }, { "BriefDescription": "Offcore requests buffer cannot take more entries for this thread core.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xb2", "EventName": "OFFCORE_REQUESTS_BUFFER.SQ_FULL", "SampleAfterValue": "2000003",
@@ -732,8 +595,6 @@ }, { "BriefDescription": "Offcore outstanding cacheable Core Data Read transactions in SuperQueue (SQ), queue to uncore", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD62, HSD61, HSM63", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD",
@@ -743,8 +604,6 @@ }, { "BriefDescription": "Cycles when offcore outstanding cacheable Core Data Read transactions are present in SuperQueue (SQ), queue to uncore.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "Errata": "HSD62, HSD61, HSM63", "EventCode": "0x60",
@@ -754,8 +613,6 @@ }, { "BriefDescription": "Cycles when offcore outstanding Demand Data Read transactions are present in SuperQueue (SQ), queue to uncore.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "Errata": "HSD78, HSD62, HSD61, HSM63, HSM80", "EventCode": "0x60",
@@ -765,8 +622,6 @@ }, { "BriefDescription": "Offcore outstanding demand rfo reads transactions in SuperQueue (SQ), queue to uncore, every cycle.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "Errata": "HSD62, HSD61, HSM63", "EventCode": "0x60",
@@ -776,8 +631,6 @@ }, { "BriefDescription": "Offcore outstanding code reads transactions in SuperQueue (SQ), queue to uncore, every cycle", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD62, HSD61, HSM63", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_CODE_RD",
@@ -787,8 +640,6 @@ }, { "BriefDescription": "Offcore outstanding Demand Data Read transactions in uncore queue.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD78, HSD62, HSD61, HSM63, HSM80", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD",
@@ -798,8 +649,6 @@ }, { "BriefDescription": "Cycles with at least 6 offcore outstanding Demand Data Read transactions in uncore queue.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "6", "Errata": "HSD78, HSD62, HSD61, HSM63, HSM80", "EventCode": "0x60",
@@ -809,8 +658,6 @@ }, { "BriefDescription": "Offcore outstanding RFO store transactions in SuperQueue (SQ), queue to uncore", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD62, HSD61, HSM63", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_RFO",
@@ -820,8 +667,6 @@ }, { "BriefDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE", "SampleAfterValue": "100003",
@@ -829,248 +674,186 @@ }, { "BriefDescription": "Counts all demand & prefetch code reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_CODE_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0244", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0091", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch data reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0091", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C07F7", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C07F7", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all requests hit in the L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_REQUESTS.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C8FFF", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0122", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch RFOs hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0122", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs) hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs) hit in the L3 and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads hit in the L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0040", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to L2) data reads hit in the L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs hit in the L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads hit in the L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_LLC_CODE_RD.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0200", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads hit in the L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_LLC_DATA_RD.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0080", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs hit in the L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_LLC_RFO.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0100", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Split locks in SQ", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xf4", "EventName": "SQ_MISC.SPLIT_LOCK", "SampleAfterValue": "100003",
tools/perf/pmu-events/arch/x86/haswellx/floating-point.json +0 -20
@@ -1,8 +1,6 @@ [ { "BriefDescription": "Approximate counts of AVX & AVX2 256-bit instructions, including non-arithmetic instructions, loads, and stores. May count non-AVX instructions that employ 256-bit operations, including (but not necessarily limited to) rep string instructions that use 256-bit loads and stores for optimized performance, XSAVE* and XRSTOR*, and operations that transition the x87 FPU data registers between x87 and MMX.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xC6", "EventName": "AVX_INSTS.ALL", "PublicDescription": "Note that a whole rep string only counts AVX_INST.ALL once.",
@@ -11,8 +9,6 @@ }, { "BriefDescription": "Cycles with any input/output SSE or FP assist", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "CounterMask": "1", "EventCode": "0xCA", "EventName": "FP_ASSIST.ANY",
@@ -22,8 +18,6 @@ }, { "BriefDescription": "Number of SIMD FP assists due to input values", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xCA", "EventName": "FP_ASSIST.SIMD_INPUT", "PublicDescription": "Number of SIMD FP assists due to input values.",
@@ -32,8 +26,6 @@ }, { "BriefDescription": "Number of SIMD FP assists due to Output values", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xCA", "EventName": "FP_ASSIST.SIMD_OUTPUT", "PublicDescription": "Number of SIMD FP assists due to output values.",
@@ -42,8 +34,6 @@ }, { "BriefDescription": "Number of X87 assists due to input value.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xCA", "EventName": "FP_ASSIST.X87_INPUT", "PublicDescription": "Number of X87 FP assists due to input values.",
@@ -52,8 +42,6 @@ }, { "BriefDescription": "Number of X87 assists due to output value.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xCA", "EventName": "FP_ASSIST.X87_OUTPUT", "PublicDescription": "Number of X87 FP assists due to output values.",
@@ -62,8 +50,6 @@ }, { "BriefDescription": "Number of SIMD Move Elimination candidate uops that were eliminated.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x58", "EventName": "MOVE_ELIMINATION.SIMD_ELIMINATED", "PublicDescription": "Number of SIMD move elimination candidate uops that were eliminated.",
@@ -72,8 +58,6 @@ }, { "BriefDescription": "Number of SIMD Move Elimination candidate uops that were not eliminated.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x58", "EventName": "MOVE_ELIMINATION.SIMD_NOT_ELIMINATED", "PublicDescription": "Number of SIMD move elimination candidate uops that were not eliminated.",
@@ -82,8 +66,6 @@ }, { "BriefDescription": "Number of transitions from AVX-256 to legacy SSE when penalty applicable.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD56, HSM57", "EventCode": "0xC1", "EventName": "OTHER_ASSISTS.AVX_TO_SSE",
@@ -92,8 +74,6 @@ }, { "BriefDescription": "Number of transitions from SSE to AVX-256 when penalty applicable.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "HSD56, HSM57", "EventCode": "0xC1", "EventName": "OTHER_ASSISTS.SSE_TO_AVX",
tools/perf/pmu-events/arch/x86/haswellx/frontend.json +0 -58
232 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/haswellx/hsx-metrics.json +725 -742
1,765 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/haswellx/memory.json +0 -170
52 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/haswellx/other.json +0 -8
Lines of this file are not shown. View the raw message.
tools/perf/pmu-events/arch/x86/haswellx/pipeline.json +0 -258
258 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/haswellx/uncore-cache.json +1184 -1264
2,448 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/haswellx/uncore-interconnect.json +301 -421
722 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/haswellx/uncore-memory.json +1009 -1028
2,037 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/haswellx/uncore-other.json +912 -922
1,834 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/haswellx/uncore-power.json +75 -75
150 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/haswellx/virtual-memory.json +0 -98
98 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.39.0.314.g84b9a713c41-goog
Part of the diff is not shown here. View the raw message.
Ian Rogers
reviewerPATCH 14/32 perf vendor events intel: Refresh icelake metrics and events
In reply to Ian RogersUpdate the icelake metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses, use of exponents and removal of redundant operations like "* 1". The events are unchanged but unused json values are removed. The formatting changes increase consistency across the json files.
--- .../pmu-events/arch/x86/icelake/cache.json | 412 ------------------ .../arch/x86/icelake/floating-point.json | 28 -- .../pmu-events/arch/x86/icelake/frontend.json | 144 ------ .../arch/x86/icelake/icl-metrics.json | 151 ++++--- .../pmu-events/arch/x86/icelake/memory.json | 171 -------- .../pmu-events/arch/x86/icelake/other.json | 132 ------ .../pmu-events/arch/x86/icelake/pipeline.json | 349 +-------------- .../arch/x86/icelake/uncore-other.json | 10 +- .../arch/x86/icelake/virtual-memory.json | 80 ---- 9 files changed, 89 insertions(+), 1388 deletions(-)
tools/perf/pmu-events/arch/x86/icelake/cache.json +0 -412
@@ -1,1272 +1,860 @@ [ { "BriefDescription": "Counts the number of cache lines replaced in L1 data cache.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x51", "EventName": "L1D.REPLACEMENT", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts L1D data line replacements including opportunistic replacements, and replacements that require stall-for-replace or block-for-replace.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Number of cycles a demand request has waited due to L1D Fill Buffer (FB) unavailability.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.FB_FULL", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts number of cycles a demand request has waited due to L1D Fill Buffer (FB) unavailability. Demand requests include cacheable/uncacheable demand load, store, lock or SW prefetch accesses.", "SampleAfterValue": "1000003", - "Speculative": "1", "UMask": "0x2" }, { "BriefDescription": "Number of phases a demand request has waited due to L1D Fill Buffer (FB) unavailability.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "CounterMask": "1", "EdgeDetect": "1", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.FB_FULL_PERIODS", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts number of phases a demand request has waited due to L1D Fill Buffer (FB) unavailability. Demand requests include cacheable/uncacheable demand load, store, lock or SW prefetch accesses.", "SampleAfterValue": "1000003", - "Speculative": "1", "UMask": "0x2" }, { "BriefDescription": "Number of cycles a demand request has waited due to L1D due to lack of L2 resources.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.L2_STALL", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts number of cycles a demand request has waited due to L1D due to lack of L2 resources. Demand requests include cacheable/uncacheable demand load, store, lock or SW prefetch accesses.", "SampleAfterValue": "1000003", - "Speculative": "1", "UMask": "0x4" }, { "BriefDescription": "Number of L1D misses that are outstanding", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.PENDING", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts number of L1D misses that are outstanding in each cycle, that is each cycle the number of Fill Buffers (FB) outstanding required by Demand Reads. FB either is held by demand loads, or it is held by non-demand loads and gets hit at least once by demand. The valid outstanding interval is defined until the FB deallocation by one of the following ways: from FB allocation, if FB is allocated by demand from the demand Hit FB, if it is allocated by hardware or software prefetch. Note: In the L1D, a Demand Read contains cacheable or noncacheable demand loads, including ones causing cache-line splits and reads due to page walks resulted from any request type.", "SampleAfterValue": "1000003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Cycles with L1D load Misses outstanding.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "CounterMask": "1", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.PENDING_CYCLES", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts duration of L1D miss outstanding in cycles.", "SampleAfterValue": "1000003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "L2 cache lines filling L2", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xF1", "EventName": "L2_LINES_IN.ALL", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of L2 cache lines filling the L2. Counting does not cover rejects.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1f" }, { "BriefDescription": "Modified cache lines that are evicted by L2 cache when triggered by an L2 cache fill.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.NON_SILENT", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of lines that are evicted by L2 cache when triggered by an L2 cache fill. Those lines are in Modified state. Modified lines are written back to L3", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0x2" }, { "BriefDescription": "Non-modified cache lines that are silently dropped by L2 cache when triggered by an L2 cache fill.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.SILENT", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of lines that are silently dropped by L2 cache when triggered by an L2 cache fill. These lines are typically in Shared or Exclusive state. A non-threaded event.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Cache lines that have been L2 hardware prefetched but not used by demand accesses", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xf2", "EventName": "L2_LINES_OUT.USELESS_HWPF", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of cache lines that have been prefetched by the L2 hardware prefetcher but not used by demand access when evicted from the L2 cache", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0x4" }, { "BriefDescription": "L2 code requests", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_CODE_RD", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the total number of L2 code requests.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0xe4" }, { "BriefDescription": "Demand Data Read requests", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_DEMAND_DATA_RD", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of demand Data Read requests (including requests from L1D hardware prefetchers). These loads may hit or miss L2 cache. Only non rejected loads are counted.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0xe1" }, { "BriefDescription": "Demand requests that miss L2 cache", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_DEMAND_MISS", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts demand requests that miss L2 cache.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0x27" }, { "BriefDescription": "Demand requests to L2 cache", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_DEMAND_REFERENCES", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts demand requests to L2 cache.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0xe7" }, { "BriefDescription": "RFO requests to L2 cache", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_RFO", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the total number of RFO (read for ownership) requests to L2 cache. L2 RFO requests include both L1D demand RFO misses as well as L1D RFO prefetches.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0xe2" }, { "BriefDescription": "L2 cache hits when fetching instructions, code reads.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.CODE_RD_HIT", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts L2 cache hits when fetching instructions, code reads.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0xc4" }, { "BriefDescription": "L2 cache misses when fetching instructions", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.CODE_RD_MISS", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts L2 cache misses when fetching instructions.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0x24" }, { "BriefDescription": "Demand Data Read requests that hit L2 cache", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of demand Data Read requests initiated by load instructions that hit L2 cache.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0xc1" }, { "BriefDescription": "Demand Data Read miss L2, no rejects", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.DEMAND_DATA_RD_MISS", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of demand Data Read requests that miss L2 cache. Only not rejected loads are counted.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0x21" }, { "BriefDescription": "RFO requests that hit L2 cache", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.RFO_HIT", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the RFO (Read-for-Ownership) requests that hit L2 cache.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0xc2" }, { "BriefDescription": "RFO requests that miss L2 cache", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.RFO_MISS", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the RFO (Read-for-Ownership) requests that miss L2 cache.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0x22" }, { "BriefDescription": "SW prefetch requests that hit L2 cache.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.SWPF_HIT", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts Software prefetch requests that hit the L2 cache. Accounts for PREFETCHNTA and PREFETCHT0/1/2 instructions when FB is not full.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0xc8" }, { "BriefDescription": "SW prefetch requests that miss L2 cache.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.SWPF_MISS", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts Software prefetch requests that miss the L2 cache. Accounts for PREFETCHNTA and PREFETCHT0/1/2 instructions when FB is not full.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0x28" }, { "BriefDescription": "L2 writebacks that access L2 cache", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xF0", "EventName": "L2_TRANS.L2_WB", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts L2 writebacks that access L2 cache.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0x40" }, { "BriefDescription": "Core-originated cacheable requests that missed L3 (Except hardware prefetches to the L3)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0x2e", "EventName": "LONGEST_LAT_CACHE.MISS", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Counts core-originated cacheable requests that miss the L3 cache (Longest Latency cache). Requests include data and code reads, Reads-for-Ownership (RFOs), speculative accesses and hardware prefetches to the L1 and L2. It does not include hardware prefetches to the L3, and may not count other types of requests to the L3.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x41" }, { "BriefDescription": "Retired load instructions.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_INST_RETIRED.ALL_LOADS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts all retired load instructions. This event accounts for SW prefetch instructions of PREFETCHNTA or PREFETCHT0/1/2 or PREFETCHW.", "SampleAfterValue": "1000003", "UMask": "0x81" }, { "BriefDescription": "Retired store instructions.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_INST_RETIRED.ALL_STORES", - "L1_Hit_Indication": "1", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts all retired store instructions.", "SampleAfterValue": "1000003", "UMask": "0x82" }, { "BriefDescription": "All retired memory instructions.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_INST_RETIRED.ANY", - "L1_Hit_Indication": "1", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts all retired memory instructions - loads and stores.", "SampleAfterValue": "1000003", "UMask": "0x83" }, { "BriefDescription": "Retired load instructions with locked access.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_INST_RETIRED.LOCK_LOADS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired load instructions with locked access.", "SampleAfterValue": "100007", "UMask": "0x21" }, { "BriefDescription": "Retired load instructions that split across a cacheline boundary.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_INST_RETIRED.SPLIT_LOADS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired load instructions that split across a cacheline boundary.", "SampleAfterValue": "100003", "UMask": "0x41" }, { "BriefDescription": "Retired store instructions that split across a cacheline boundary.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_INST_RETIRED.SPLIT_STORES", - "L1_Hit_Indication": "1", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired store instructions that split across a cacheline boundary.", "SampleAfterValue": "100003", "UMask": "0x42" }, { "BriefDescription": "Retired load instructions that miss the STLB.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_INST_RETIRED.STLB_MISS_LOADS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Number of retired load instructions that (start a) miss in the 2nd-level TLB (STLB).", "SampleAfterValue": "100003", "UMask": "0x11" }, { "BriefDescription": "Retired store instructions that miss the STLB.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_INST_RETIRED.STLB_MISS_STORES", - "L1_Hit_Indication": "1", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Number of retired store instructions that (start a) miss in the 2nd-level TLB (STLB).", "SampleAfterValue": "100003", "UMask": "0x12" }, { "BriefDescription": "Retired load instructions whose data sources were L3 and cross-core snoop hits in on-pkg core cache", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd2", "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_HIT", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired load instructions whose data sources were L3 and cross-core snoop hits in on-pkg core cache.", "SampleAfterValue": "20011", "UMask": "0x2" }, { "BriefDescription": "Retired load instructions whose data sources were HitM responses from shared L3", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd2", "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_HITM", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired load instructions whose data sources were HitM responses from shared L3.", "SampleAfterValue": "20011", "UMask": "0x4" }, { "BriefDescription": "Retired load instructions whose data sources were L3 hit and cross-core snoop missed in on-pkg core cache.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd2", "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_MISS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the retired load instructions whose data sources were L3 hit and cross-core snoop missed in on-pkg core cache.", "SampleAfterValue": "20011", "UMask": "0x1" }, { "BriefDescription": "Retired load instructions whose data sources were hits in L3 without snoops required", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd2", "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_NONE", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired load instructions whose data sources were hits in L3 without snoops required.", "SampleAfterValue": "100003", "UMask": "0x8" }, { "BriefDescription": "Number of completed demand load requests that missed the L1, but hit the FB(fill buffer), because a preceding miss to the same cacheline initiated the line to be brought into L1, but data is not yet ready in L1.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_RETIRED.FB_HIT", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired load instructions with at least one uop was load missed in L1 but hit FB (Fill Buffers) due to preceding miss to the same cache line with data not ready.", "SampleAfterValue": "100007", "UMask": "0x40" }, { "BriefDescription": "Retired load instructions with L1 cache hits as data sources", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_RETIRED.L1_HIT", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L1 data cache. This event includes all SW prefetches and lock instructions regardless of the data source.", "SampleAfterValue": "1000003", "UMask": "0x1" }, { "BriefDescription": "Retired load instructions missed L1 cache as data sources", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_RETIRED.L1_MISS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired load instructions with at least one uop that missed in the L1 cache.", "SampleAfterValue": "200003", "UMask": "0x8" }, { "BriefDescription": "Retired load instructions with L2 cache hits as data sources", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_RETIRED.L2_HIT", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired load instructions with L2 cache hits as data sources.", "SampleAfterValue": "200003", "UMask": "0x2" }, { "BriefDescription": "Retired load instructions missed L2 cache as data sources", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_RETIRED.L2_MISS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired load instructions missed L2 cache as data sources.", "SampleAfterValue": "100021", "UMask": "0x10" }, { "BriefDescription": "Retired load instructions with L3 cache hits as data sources", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_RETIRED.L3_HIT", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L3 cache.", "SampleAfterValue": "100021", "UMask": "0x4" }, { "BriefDescription": "Retired load instructions missed L3 cache as data sources", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_RETIRED.L3_MISS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired load instructions with at least one uop that missed in the L3 cache.", "SampleAfterValue": "50021", "UMask": "0x20" }, { "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that hit a cacheline in the L3 where a snoop was sent or not.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC03C0004", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that hit a cacheline in the L3 where a snoop hit in another cores caches, data forwarding is required as the data is modified.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0004", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that hit a cacheline in the L3 where a snoop hit in another core, data forwarding is not required.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0004", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that hit a cacheline in the L3 where a snoop was sent but no other cores had the data.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C0004", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that hit a cacheline in the L3 where a snoop was not needed to satisfy the request.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0004", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that hit a cacheline in the L3 where a snoop was sent.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_SENT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1E003C0004", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that hit a cacheline in the L3 where a snoop was sent or not.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC03C0001", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that hit a cacheline in the L3 where a snoop hit in another cores caches, data forwarding is required as the data is modified.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0001", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that hit a cacheline in the L3 where a snoop hit in another core, data forwarding is not required.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0001", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that hit a cacheline in the L3 where a snoop was sent but no other cores had the data.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C0001", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that hit a cacheline in the L3 where a snoop was not needed to satisfy the request.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0001", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that hit a cacheline in the L3 where a snoop was sent.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_SENT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1E003C0001", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) requests and software prefetches for exclusive ownership (PREFETCHW) that hit a cacheline in the L3 where a snoop was sent or not.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_RFO.L3_HIT.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC03C0002", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) requests and software prefetches for exclusive ownership (PREFETCHW) that hit a cacheline in the L3 where a snoop hit in another cores caches, data forwarding is required as the data is modified.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0002", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) requests and software prefetches for exclusive ownership (PREFETCHW) that hit a cacheline in the L3 where a snoop hit in another core, data forwarding is not required.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0002", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) requests and software prefetches for exclusive ownership (PREFETCHW) that hit a cacheline in the L3 where a snoop was sent but no other cores had the data.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C0002", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) requests and software prefetches for exclusive ownership (PREFETCHW) that hit a cacheline in the L3 where a snoop was not needed to satisfy the request.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0002", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) requests and software prefetches for exclusive ownership (PREFETCHW) that hit a cacheline in the L3 where a snoop was sent.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_SENT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1E003C0002", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts L1 data cache prefetch requests and software prefetches (except PREFETCHW) that hit a cacheline in the L3 where a snoop was sent or not.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.HWPF_L1D_AND_SWPF.L3_HIT.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC03C0400", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts L1 data cache prefetch requests and software prefetches (except PREFETCHW) that hit a cacheline in the L3 where a snoop was sent but no other cores had the data.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.HWPF_L1D_AND_SWPF.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C0400", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts L1 data cache prefetch requests and software prefetches (except PREFETCHW) that hit a cacheline in the L3 where a snoop was not needed to satisfy the request.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.HWPF_L1D_AND_SWPF.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0400", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts hardware prefetch data reads (which bring data to L2) that hit a cacheline in the L3 where a snoop was sent or not.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.HWPF_L2_DATA_RD.L3_HIT.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC03C0010", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts hardware prefetch data reads (which bring data to L2) that hit a cacheline in the L3 where a snoop hit in another cores caches, data forwarding is required as the data is modified.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.HWPF_L2_DATA_RD.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0010", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts hardware prefetch data reads (which bring data to L2) that hit a cacheline in the L3 where a snoop hit in another core, data forwarding is not required.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.HWPF_L2_DATA_RD.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0010", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts hardware prefetch data reads (which bring data to L2) that hit a cacheline in the L3 where a snoop was sent but no other cores had the data.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.HWPF_L2_DATA_RD.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C0010", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts hardware prefetch data reads (which bring data to L2) that hit a cacheline in the L3 where a snoop was not needed to satisfy the request.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.HWPF_L2_DATA_RD.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0010", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts hardware prefetch data reads (which bring data to L2) that hit a cacheline in the L3 where a snoop was sent.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.HWPF_L2_DATA_RD.L3_HIT.SNOOP_SENT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1E003C0010", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts hardware prefetch RFOs (which bring data to L2) that hit a cacheline in the L3 where a snoop was sent or not.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.HWPF_L2_RFO.L3_HIT.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC03C0020", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts hardware prefetch RFOs (which bring data to L2) that hit a cacheline in the L3 where a snoop hit in another cores caches, data forwarding is required as the data is modified.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.HWPF_L2_RFO.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0020", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts hardware prefetch RFOs (which bring data to L2) that hit a cacheline in the L3 where a snoop hit in another core, data forwarding is not required.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.HWPF_L2_RFO.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0020", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts hardware prefetch RFOs (which bring data to L2) that hit a cacheline in the L3 where a snoop was sent but no other cores had the data.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.HWPF_L2_RFO.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C0020", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts hardware prefetch RFOs (which bring data to L2) that hit a cacheline in the L3 where a snoop was not needed to satisfy the request.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.HWPF_L2_RFO.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0020", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts hardware prefetch RFOs (which bring data to L2) that hit a cacheline in the L3 where a snoop was sent.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.HWPF_L2_RFO.L3_HIT.SNOOP_SENT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1E003C0020", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts hardware prefetches to the L3 only that hit a cacheline in the L3 where a snoop was sent or not.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.HWPF_L3.L3_HIT.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC03C2380", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts miscellaneous requests, such as I/O and un-cacheable accesses that hit a cacheline in the L3 where a snoop hit in another core, data forwarding is not required.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.OTHER.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C8000", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts miscellaneous requests, such as I/O and un-cacheable accesses that hit a cacheline in the L3 where a snoop was sent but no other cores had the data.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.OTHER.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C8000", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts miscellaneous requests, such as I/O and un-cacheable accesses that hit a cacheline in the L3 where a snoop was not needed to satisfy the request.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.OTHER.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C8000", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts miscellaneous requests, such as I/O and un-cacheable accesses that hit a cacheline in the L3 where a snoop was sent.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.OTHER.L3_HIT.SNOOP_SENT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1E003C8000", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Counts streaming stores that hit a cacheline in the L3 where a snoop was sent or not.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.STREAMING_WR.L3_HIT.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC03C0800", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Demand and prefetch data reads", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.ALL_DATA_RD", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the demand and prefetch data reads. All Core Data Reads include cacheable 'Demands' and L2 prefetchers (not L3 prefetchers). Counting also covers reads due to page walks resulted from any request type.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x8" }, { "BriefDescription": "Counts memory transactions sent to the uncore.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.ALL_REQUESTS", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts memory transactions sent to the uncore including requests initiated by the core, all L3 prefetches, reads resulting from page walks, and snoop responses.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x80" }, { "BriefDescription": "Demand Data Read requests sent to uncore", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xb0", "EventName": "OFFCORE_REQUESTS.DEMAND_DATA_RD", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the Demand Data Read requests sent to uncore. Use it in conjunction with OFFCORE_REQUESTS_OUTSTANDING to determine average latency in the uncore.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Demand RFO requests including regular RFOs, locks, ItoM", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xb0", "EventName": "OFFCORE_REQUESTS.DEMAND_RFO", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the demand RFO (read for ownership) requests including regular RFOs, locks, ItoM.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x4" }, { "BriefDescription": "For every cycle, increments by the number of outstanding data read requests pending.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD", - "PEBScounters": "0,1,2,3", "PublicDescription": "For every cycle, increments by the number of outstanding data read requests pending. Data read requests include cacheable demand reads and L2 prefetches, but do not include RFOs, code reads or prefetches to the L3. Reads due to page walks resulting from any request type will also be counted. Requests are considered outstanding from the time they miss the core's L2 cache until the transaction completion message is sent to the requestor.", "SampleAfterValue": "1000003", - "Speculative": "1", "UMask": "0x8" }, { "BriefDescription": "Cycles where at least 1 outstanding data read request is pending.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "CounterMask": "1", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DATA_RD", - "PEBScounters": "0,1,2,3", "PublicDescription": "Cycles where at least 1 outstanding data read request is pending. Data read requests include cacheable demand reads and L2 prefetches, but do not include RFOs, code reads or prefetches to the L3. Reads due to page walks resulting from any request type will also be counted. Requests are considered outstanding from the time they miss the core's L2 cache until the transaction completion message is sent to the requestor.", "SampleAfterValue": "1000003", - "Speculative": "1", "UMask": "0x8" }, { "BriefDescription": "Cycles where at least 1 outstanding Demand RFO request is pending.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "CounterMask": "1", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_RFO", - "PEBScounters": "0,1,2,3", "PublicDescription": "Cycles where at least 1 outstanding Demand RFO request is pending. RFOs are initiated by a core as part of a data store operation. Demand RFO requests include RFOs, locks, and ItoM transactions. Requests are considered outstanding from the time they miss the core's L2 cache until the transaction completion message is sent to the requestor.", "SampleAfterValue": "1000003", - "Speculative": "1", "UMask": "0x4" }, { "BriefDescription": "For every cycle, increments by the number of outstanding demand data read requests pending.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD", - "PEBScounters": "0,1,2,3", "PublicDescription": "For every cycle, increments by the number of outstanding demand data read requests pending. Requests are considered outstanding from the time they miss the core's L2 cache until the transaction completion message is sent to the requestor.", "SampleAfterValue": "1000003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Store Read transactions pending for off-core. Highly correlated.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_RFO", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of off-core outstanding read-for-ownership (RFO) store transactions every cycle. An RFO transaction is considered to be in the Off-core outstanding state between L2 cache miss and transaction completion.", "SampleAfterValue": "1000003", - "Speculative": "1", "UMask": "0x4" }, { "BriefDescription": "Cycles the queue waiting for offcore responses is full.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xf4", "EventName": "SQ_MISC.SQ_FULL", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the cycles for which the thread is active and the queue waiting for responses from the uncore cannot take any more entries.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x4" }, { "BriefDescription": "Number of PREFETCHNTA instructions executed.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x32", "EventName": "SW_PREFETCH_ACCESS.NTA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of PREFETCHNTA instructions executed.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Number of PREFETCHW instructions executed.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x32", "EventName": "SW_PREFETCH_ACCESS.PREFETCHW", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of PREFETCHW instructions executed.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x8" }, { "BriefDescription": "Number of PREFETCHT0 instructions executed.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x32", "EventName": "SW_PREFETCH_ACCESS.T0", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of PREFETCHT0 instructions executed.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x2" }, { "BriefDescription": "Number of PREFETCHT1 or PREFETCHT2 instructions executed.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x32", "EventName": "SW_PREFETCH_ACCESS.T1_T2", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of PREFETCHT1 or PREFETCHT2 instructions executed.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x4" } ]
tools/perf/pmu-events/arch/x86/icelake/floating-point.json +0 -28
@@ -1,100 +1,72 @@ [ { "BriefDescription": "Counts all microcode FP assists.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc1", "EventName": "ASSISTS.FP", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Counts all microcode Floating Point assists.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x2" }, { "BriefDescription": "Counts number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 2 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc7", "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 2 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", "SampleAfterValue": "100003", "UMask": "0x4" }, { "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc7", "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", "SampleAfterValue": "100003", "UMask": "0x8" }, { "BriefDescription": "Counts number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc7", "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", "SampleAfterValue": "100003", "UMask": "0x10" }, { "BriefDescription": "Counts number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc7", "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", "SampleAfterValue": "100003", "UMask": "0x20" }, { "BriefDescription": "Counts number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc7", "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", "SampleAfterValue": "100003", "UMask": "0x40" }, { "BriefDescription": "Counts number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 16 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc7", "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 16 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", "SampleAfterValue": "100003", "UMask": "0x80" }, { "BriefDescription": "Counts number of SSE/AVX computational scalar double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc7", "EventName": "FP_ARITH_INST_RETIRED.SCALAR_DOUBLE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Number of SSE/AVX computational scalar double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts number of SSE/AVX computational scalar single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc7", "EventName": "FP_ARITH_INST_RETIRED.SCALAR_SINGLE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Number of SSE/AVX computational scalar single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", "SampleAfterValue": "100003", "UMask": "0x2"
tools/perf/pmu-events/arch/x86/icelake/frontend.json +0 -144
497 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/icelake/icl-metrics.json +86 -65
458 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/icelake/memory.json +0 -171
565 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/icelake/other.json +0 -132
108 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/icelake/pipeline.json +1 -348
349 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/icelake/uncore-other.json +2 -8
Lines of this file are not shown. View the raw message.
tools/perf/pmu-events/arch/x86/icelake/virtual-memory.json +0 -80
80 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.39.0.314.g84b9a713c41-goog
Part of the diff is not shown here. View the raw message.
Ian Rogers
reviewerPATCH 15/32 perf vendor events intel: Refresh icelakex metrics and events
In reply to Ian RogersUpdate the icelakex metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses, use of exponents and removal of redundant operations like "* 1". The order of metrics varies as TMA metrics are first converted and then removed if perfmon versions are found. The events are updated to 1.17, in particular uncore, with fixes to uncore events and improved descriptions. The formatting changes increase consistency across the json files.
--- .../pmu-events/arch/x86/icelakex/cache.json | 316 +- .../arch/x86/icelakex/floating-point.json | 28 - .../arch/x86/icelakex/frontend.json | 140 - .../arch/x86/icelakex/icx-metrics.json | 2192 +- .../pmu-events/arch/x86/icelakex/memory.json | 139 +- .../pmu-events/arch/x86/icelakex/other.json | 117 - .../arch/x86/icelakex/pipeline.json | 344 +- .../arch/x86/icelakex/uncore-memory.json | 1878 +- .../arch/x86/icelakex/uncore-other.json | 45144 +++++++--------- .../arch/x86/icelakex/uncore-power.json | 115 +- .../arch/x86/icelakex/virtual-memory.json | 88 - tools/perf/pmu-events/arch/x86/mapfile.csv | 2 +- 12 files changed, 22074 insertions(+), 28429 deletions(-)
tools/perf/pmu-events/arch/x86/icelakex/cache.json +6 -310
@@ -1,1172 +1,868 @@ [ { "BriefDescription": "Counts the number of cache lines replaced in L1 data cache.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x51", "EventName": "L1D.REPLACEMENT", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts L1D data line replacements including opportunistic replacements, and replacements that require stall-for-replace or block-for-replace.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Number of cycles a demand request has waited due to L1D Fill Buffer (FB) unavailability.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.FB_FULL", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts number of cycles a demand request has waited due to L1D Fill Buffer (FB) unavailability. Demand requests include cacheable/uncacheable demand load, store, lock or SW prefetch accesses.", "SampleAfterValue": "1000003", - "Speculative": "1", "UMask": "0x2" }, { "BriefDescription": "Number of phases a demand request has waited due to L1D Fill Buffer (FB) unavailability.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "CounterMask": "1", "EdgeDetect": "1", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.FB_FULL_PERIODS", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts number of phases a demand request has waited due to L1D Fill Buffer (FB) unavailability. Demand requests include cacheable/uncacheable demand load, store, lock or SW prefetch accesses.", "SampleAfterValue": "1000003", - "Speculative": "1", "UMask": "0x2" }, { "BriefDescription": "Number of cycles a demand request has waited due to L1D due to lack of L2 resources.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.L2_STALL", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts number of cycles a demand request has waited due to L1D due to lack of L2 resources. Demand requests include cacheable/uncacheable demand load, store, lock or SW prefetch accesses.", "SampleAfterValue": "1000003", - "Speculative": "1", "UMask": "0x4" }, { "BriefDescription": "Number of L1D misses that are outstanding", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.PENDING", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts number of L1D misses that are outstanding in each cycle, that is each cycle the number of Fill Buffers (FB) outstanding required by Demand Reads. FB either is held by demand loads, or it is held by non-demand loads and gets hit at least once by demand. The valid outstanding interval is defined until the FB deallocation by one of the following ways: from FB allocation, if FB is allocated by demand from the demand Hit FB, if it is allocated by hardware or software prefetch. Note: In the L1D, a Demand Read contains cacheable or noncacheable demand loads, including ones causing cache-line splits and reads due to page walks resulted from any request type.", "SampleAfterValue": "1000003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Cycles with L1D load Misses outstanding.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "CounterMask": "1", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.PENDING_CYCLES", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts duration of L1D miss outstanding in cycles.", "SampleAfterValue": "1000003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "L2 cache lines filling L2", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xF1", "EventName": "L2_LINES_IN.ALL", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of L2 cache lines filling the L2. Counting does not cover rejects.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1f" }, { "BriefDescription": "Cache lines that are evicted by L2 cache when triggered by an L2 cache fill.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.NON_SILENT", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of lines that are evicted by the L2 cache due to L2 cache fills. Evicted lines are delivered to the L3, which may or may not cache them, according to system load and priorities.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0x2" }, { "BriefDescription": "Non-modified cache lines that are silently dropped by L2 cache when triggered by an L2 cache fill.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.SILENT", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of lines that are silently dropped by L2 cache when triggered by an L2 cache fill. These lines are typically in Shared or Exclusive state. A non-threaded event.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "L2 code requests", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_CODE_RD", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the total number of L2 code requests.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0xe4" }, { "BriefDescription": "Demand Data Read requests", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_DEMAND_DATA_RD", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of demand Data Read requests (including requests from L1D hardware prefetchers). These loads may hit or miss L2 cache. Only non rejected loads are counted.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0xe1" }, { "BriefDescription": "Demand requests that miss L2 cache", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_DEMAND_MISS", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts demand requests that miss L2 cache.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0x27" }, { "BriefDescription": "RFO requests to L2 cache", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_RFO", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the total number of RFO (read for ownership) requests to L2 cache. L2 RFO requests include both L1D demand RFO misses as well as L1D RFO prefetches.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0xe2" }, { "BriefDescription": "L2 cache hits when fetching instructions, code reads.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.CODE_RD_HIT", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts L2 cache hits when fetching instructions, code reads.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0xc4" }, { "BriefDescription": "L2 cache misses when fetching instructions", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.CODE_RD_MISS", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts L2 cache misses when fetching instructions.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0x24" }, { "BriefDescription": "Demand Data Read requests that hit L2 cache", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of demand Data Read requests initiated by load instructions that hit L2 cache.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0xc1" }, { "BriefDescription": "Demand Data Read miss L2, no rejects", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.DEMAND_DATA_RD_MISS", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of demand Data Read requests that miss L2 cache. Only not rejected loads are counted.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0x21" }, { "BriefDescription": "RFO requests that hit L2 cache", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.RFO_HIT", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the RFO (Read-for-Ownership) requests that hit L2 cache.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0xc2" }, { "BriefDescription": "RFO requests that miss L2 cache", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.RFO_MISS", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the RFO (Read-for-Ownership) requests that miss L2 cache.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0x22" }, { "BriefDescription": "SW prefetch requests that hit L2 cache.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.SWPF_HIT", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts Software prefetch requests that hit the L2 cache. Accounts for PREFETCHNTA and PREFETCHT0/1/2 instructions when FB is not full.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0xc8" }, { "BriefDescription": "SW prefetch requests that miss L2 cache.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_RQSTS.SWPF_MISS", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts Software prefetch requests that miss the L2 cache. Accounts for PREFETCHNTA and PREFETCHT0/1/2 instructions when FB is not full.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0x28" }, { "BriefDescription": "L2 writebacks that access L2 cache", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xF0", "EventName": "L2_TRANS.L2_WB", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts L2 writebacks that access L2 cache.", "SampleAfterValue": "200003", - "Speculative": "1", "UMask": "0x40" }, { "BriefDescription": "Core-originated cacheable requests that missed L3 (Except hardware prefetches to the L3)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0x2e", "EventName": "LONGEST_LAT_CACHE.MISS", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Counts core-originated cacheable requests that miss the L3 cache (Longest Latency cache). Requests include data and code reads, Reads-for-Ownership (RFOs), speculative accesses and hardware prefetches to the L1 and L2. It does not include hardware prefetches to the L3, and may not count other types of requests to the L3.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x41" }, { "BriefDescription": "Core-originated cacheable requests that refer to L3 (Except hardware prefetches to the L3)", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0x2e", "EventName": "LONGEST_LAT_CACHE.REFERENCE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Counts core-originated cacheable requests to the L3 cache (Longest Latency cache). Requests include data and code reads, Reads-for-Ownership (RFOs), speculative accesses and hardware prefetches to the L1 and L2. It does not include hardware prefetches to the L3, and may not count other types of requests to the L3.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x4f" }, { "BriefDescription": "Retired load instructions.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_INST_RETIRED.ALL_LOADS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts all retired load instructions. This event accounts for SW prefetch instructions of PREFETCHNTA or PREFETCHT0/1/2 or PREFETCHW.", "SampleAfterValue": "1000003", "UMask": "0x81" }, { "BriefDescription": "Retired store instructions.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_INST_RETIRED.ALL_STORES", - "L1_Hit_Indication": "1", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts all retired store instructions.", "SampleAfterValue": "1000003", "UMask": "0x82" }, { "BriefDescription": "All retired memory instructions.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_INST_RETIRED.ANY", - "L1_Hit_Indication": "1", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts all retired memory instructions - loads and stores.", "SampleAfterValue": "1000003", "UMask": "0x83" }, { "BriefDescription": "Retired load instructions with locked access.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_INST_RETIRED.LOCK_LOADS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired load instructions with locked access.", "SampleAfterValue": "100007", "UMask": "0x21" }, { "BriefDescription": "Retired load instructions that split across a cacheline boundary.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_INST_RETIRED.SPLIT_LOADS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired load instructions that split across a cacheline boundary.", "SampleAfterValue": "100003", "UMask": "0x41" }, { "BriefDescription": "Retired store instructions that split across a cacheline boundary.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_INST_RETIRED.SPLIT_STORES", - "L1_Hit_Indication": "1", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired store instructions that split across a cacheline boundary.", "SampleAfterValue": "100003", "UMask": "0x42" }, { "BriefDescription": "Retired load instructions that miss the STLB.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_INST_RETIRED.STLB_MISS_LOADS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Number of retired load instructions that (start a) miss in the 2nd-level TLB (STLB).", "SampleAfterValue": "100003", "UMask": "0x11" }, { "BriefDescription": "Retired store instructions that miss the STLB.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_INST_RETIRED.STLB_MISS_STORES", - "L1_Hit_Indication": "1", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Number of retired store instructions that (start a) miss in the 2nd-level TLB (STLB).", "SampleAfterValue": "100003", "UMask": "0x12" }, { "BriefDescription": "Retired load instructions whose data sources were HitM responses from shared L3", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd2", "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_FWD", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired load instructions whose data sources were HitM responses from shared L3.", "SampleAfterValue": "20011", "UMask": "0x4" }, { "BriefDescription": "This event is deprecated. Refer to new event MEM_LOAD_L3_HIT_RETIRED.XSNP_NO_FWD", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", + "Deprecated": "1", "EventCode": "0xd2", "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_HIT", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "20011", "UMask": "0x2" }, { "BriefDescription": "This event is deprecated. Refer to new event MEM_LOAD_L3_HIT_RETIRED.XSNP_FWD", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", + "Deprecated": "1", "EventCode": "0xd2", "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_HITM", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "20011", "UMask": "0x4" }, { "BriefDescription": "Retired load instructions whose data sources were L3 hit and cross-core snoop missed in on-pkg core cache.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd2", "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_MISS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the retired load instructions whose data sources were L3 hit and cross-core snoop missed in on-pkg core cache.", "SampleAfterValue": "20011", "UMask": "0x1" }, { "BriefDescription": "Retired load instructions whose data sources were hits in L3 without snoops required", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd2", "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_NONE", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired load instructions whose data sources were hits in L3 without snoops required.", "SampleAfterValue": "100003", "UMask": "0x8" }, { "BriefDescription": "Retired load instructions whose data sources were L3 and cross-core snoop hits in on-pkg core cache", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd2", "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_NO_FWD", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired load instructions whose data sources were L3 and cross-core snoop hits in on-pkg core cache.", "SampleAfterValue": "20011", "UMask": "0x2" }, { "BriefDescription": "Retired load instructions which data sources missed L3 but serviced from local dram", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd3", "EventName": "MEM_LOAD_L3_MISS_RETIRED.LOCAL_DRAM", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Retired load instructions which data sources missed L3 but serviced from local DRAM.", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Retired load instructions which data sources missed L3 but serviced from remote dram", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd3", "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_DRAM", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100007", "UMask": "0x2" }, { "BriefDescription": "Retired load instructions whose data sources was forwarded from a remote cache", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd3", "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_FWD", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Retired load instructions whose data sources was forwarded from a remote cache.", "SampleAfterValue": "100007", "UMask": "0x8" }, { "BriefDescription": "Retired load instructions whose data sources was remote HITM", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd3", "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_HITM", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Retired load instructions whose data sources was remote HITM.", "SampleAfterValue": "100007", "UMask": "0x4" }, { - "BriefDescription": "Retired load instructions with remote Intel Optane DC persistent memory as the data source where the data request missed all caches.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", + "BriefDescription": "Retired load instructions with remote Intel(R) Optane(TM) DC persistent memory as the data source where the data request missed all caches.", "Data_LA": "1", "EventCode": "0xd3", "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_PMM", "PEBS": "1", - "PEBScounters": "0,1,2,3", - "PublicDescription": "Counts retired load instructions with remote Intel Optane DC persistent memory as the data source and the data request missed L3 (AppDirect or Memory Mode) and DRAM cache(Memory Mode).", + "PublicDescription": "Counts retired load instructions with remote Intel(R) Optane(TM) DC persistent memory as the data source and the data request missed L3 (AppDirect or Memory Mode) and DRAM cache(Memory Mode).", "SampleAfterValue": "100007", "UMask": "0x10" }, { "BriefDescription": "Retired instructions with at least 1 uncacheable load or Bus Lock.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd4", "EventName": "MEM_LOAD_MISC_RETIRED.UC", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Retired instructions with at least one load to uncacheable memory-type, or at least one cache-line split locked access (Bus Lock).", "SampleAfterValue": "100007", "UMask": "0x4" }, { "BriefDescription": "Number of completed demand load requests that missed the L1, but hit the FB(fill buffer), because a preceding miss to the same cacheline initiated the line to be brought into L1, but data is not yet ready in L1.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_RETIRED.FB_HIT", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired load instructions with at least one uop was load missed in L1 but hit FB (Fill Buffers) due to preceding miss to the same cache line with data not ready.", "SampleAfterValue": "100007", "UMask": "0x40" }, { "BriefDescription": "Retired load instructions with L1 cache hits as data sources", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_RETIRED.L1_HIT", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L1 data cache. This event includes all SW prefetches and lock instructions regardless of the data source.", "SampleAfterValue": "1000003", "UMask": "0x1" }, { "BriefDescription": "Retired load instructions missed L1 cache as data sources", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_RETIRED.L1_MISS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired load instructions with at least one uop that missed in the L1 cache.", "SampleAfterValue": "200003", "UMask": "0x8" }, { "BriefDescription": "Retired load instructions with L2 cache hits as data sources", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_RETIRED.L2_HIT", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired load instructions with L2 cache hits as data sources.", "SampleAfterValue": "200003", "UMask": "0x2" }, { "BriefDescription": "Retired load instructions missed L2 cache as data sources", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_RETIRED.L2_MISS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired load instructions missed L2 cache as data sources.", "SampleAfterValue": "100021", "UMask": "0x10" }, { "BriefDescription": "Retired load instructions with L3 cache hits as data sources", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_RETIRED.L3_HIT", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L3 cache.", "SampleAfterValue": "100021", "UMask": "0x4" }, { "BriefDescription": "Retired load instructions missed L3 cache as data sources", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_RETIRED.L3_MISS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts retired load instructions with at least one uop that missed in the L3 cache.", "SampleAfterValue": "50021", "UMask": "0x20" }, { - "BriefDescription": "Retired load instructions with local Intel Optane DC persistent memory as the data source where the data request missed all caches.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", + "BriefDescription": "Retired load instructions with local Intel(R) Optane(TM) DC persistent memory as the data source where the data request missed all caches.", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_RETIRED.LOCAL_PMM", "PEBS": "1", - "PEBScounters": "0,1,2,3", - "PublicDescription": "Counts retired load instructions with local Intel Optane DC persistent memory as the data source and the data request missed L3 (AppDirect or Memory Mode) and DRAM cache(Memory Mode).", + "PublicDescription": "Counts retired load instructions with local Intel(R) Optane(TM) DC persistent memory as the data source and the data request missed L3 (AppDirect or Memory Mode) and DRAM cache(Memory Mode).", "SampleAfterValue": "100003", "UMask": "0x80" }, { "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that hit in the L3 or were snooped from another core's caches on the same socket.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_CODE_RD.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that resulted in a snoop hit a modified line in another core's caches which forwarded the data.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that hit a modified line in a distant L3 Cache or were snooped from a distant core's L1/L2 caches on this socket when the system is in SNC (sub-NUMA cluster) mode.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_CODE_RD.SNC_CACHE.HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1008000004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that either hit a non-modified line in a distant L3 Cache or were snooped from a distant core's L1/L2 caches on this socket when the system is in SNC (sub-NUMA cluster) mode.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_CODE_RD.SNC_CACHE.HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x808000004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that hit in the L3 or were snooped from another core's caches on the same socket.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_DATA_RD.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that resulted in a snoop hit a modified line in another core's caches which forwarded the data.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that resulted in a snoop that hit in another core, which did not forward the data.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that resulted in a snoop hit in another core's caches which forwarded the unmodified data to the requesting core.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that were supplied by a cache on a remote socket where a snoop hit a modified line in another core's caches which forwarded the data.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_DATA_RD.REMOTE_CACHE.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1030000001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that were supplied by a cache on a remote socket where a snoop hit in another core's caches which forwarded the unmodified data to the requesting core.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_DATA_RD.REMOTE_CACHE.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x830000001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that hit a modified line in a distant L3 Cache or were snooped from a distant core's L1/L2 caches on this socket when the system is in SNC (sub-NUMA cluster) mode.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_DATA_RD.SNC_CACHE.HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1008000001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that either hit a non-modified line in a distant L3 Cache or were snooped from a distant core's L1/L2 caches on this socket when the system is in SNC (sub-NUMA cluster) mode.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_DATA_RD.SNC_CACHE.HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x808000001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) requests and software prefetches for exclusive ownership (PREFETCHW) that hit in the L3 or were snooped from another core's caches on the same socket.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_RFO.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) requests and software prefetches for exclusive ownership (PREFETCHW) that resulted in a snoop hit a modified line in another core's caches which forwarded the data.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) requests and software prefetches for exclusive ownership (PREFETCHW) that hit a modified line in a distant L3 Cache or were snooped from a distant core's L1/L2 caches on this socket when the system is in SNC (sub-NUMA cluster) mode.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_RFO.SNC_CACHE.HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1008000002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) requests and software prefetches for exclusive ownership (PREFETCHW) that either hit a non-modified line in a distant L3 Cache or were snooped from a distant core's L1/L2 caches on this socket when the system is in SNC (sub-NUMA cluster) mode.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.DEMAND_RFO.SNC_CACHE.HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x808000002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L1 data cache prefetch requests and software prefetches (except PREFETCHW) that hit in the L3 or were snooped from another core's caches on the same socket.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.HWPF_L1D_AND_SWPF.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0400", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts hardware prefetches to the L3 only that hit in the L3 or were snooped from another core's caches on the same socket.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.HWPF_L3.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80082380", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts hardware and software prefetches to all cache levels that hit in the L3 or were snooped from another core's caches on the same socket.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.PREFETCHES.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C27F0", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all (cacheable) data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that hit in the L3 or were snooped from another core's caches on the same socket.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.READS_TO_CORE.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F003C0477", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all (cacheable) data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that resulted in a snoop hit a modified line in another core's caches which forwarded the data.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.READS_TO_CORE.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0477", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all (cacheable) data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that resulted in a snoop that hit in another core, which did not forward the data.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.READS_TO_CORE.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0477", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all (cacheable) data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that resulted in a snoop hit in another core's caches which forwarded the unmodified data to the requesting core.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.READS_TO_CORE.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0477", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all (cacheable) data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by a cache on a remote socket where a snoop was sent and data was returned (Modified or Not Modified).", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.READS_TO_CORE.REMOTE_CACHE.SNOOP_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1830000477", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all (cacheable) data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by a cache on a remote socket where a snoop hit a modified line in another core's caches which forwarded the data.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.READS_TO_CORE.REMOTE_CACHE.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1030000477", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all (cacheable) data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by a cache on a remote socket where a snoop hit in another core's caches which forwarded the unmodified data to the requesting core.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.READS_TO_CORE.REMOTE_CACHE.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x830000477", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all (cacheable) data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that hit a modified line in a distant L3 Cache or were snooped from a distant core's L1/L2 caches on this socket when the system is in SNC (sub-NUMA cluster) mode.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.READS_TO_CORE.SNC_CACHE.HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1008000477", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all (cacheable) data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that either hit a non-modified line in a distant L3 Cache or were snooped from a distant core's L1/L2 caches on this socket when the system is in SNC (sub-NUMA cluster) mode.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.READS_TO_CORE.SNC_CACHE.HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x808000477", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts streaming stores that hit in the L3 or were snooped from another core's caches on the same socket.", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.STREAMING_WR.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80080800", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Demand and prefetch data reads", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.ALL_DATA_RD", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the demand and prefetch data reads. All Core Data Reads include cacheable 'Demands' and L2 prefetchers (not L3 prefetchers). Counting also covers reads due to page walks resulted from any request type.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x8" }, { "BriefDescription": "Counts memory transactions sent to the uncore.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.ALL_REQUESTS", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts memory transactions sent to the uncore including requests initiated by the core, all L3 prefetches, reads resulting from page walks, and snoop responses.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x80" }, { "BriefDescription": "Counts cacheable and non-cacheable code reads to the core.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xb0", "EventName": "OFFCORE_REQUESTS.DEMAND_CODE_RD", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts both cacheable and non-cacheable code reads to the core.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x2" }, { "BriefDescription": "Demand Data Read requests sent to uncore", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xb0", "EventName": "OFFCORE_REQUESTS.DEMAND_DATA_RD", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the Demand Data Read requests sent to uncore. Use it in conjunction with OFFCORE_REQUESTS_OUTSTANDING to determine average latency in the uncore.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Demand RFO requests including regular RFOs, locks, ItoM", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xb0", "EventName": "OFFCORE_REQUESTS.DEMAND_RFO", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the demand RFO (read for ownership) requests including regular RFOs, locks, ItoM.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x4" }, { "BriefDescription": "For every cycle, increments by the number of outstanding data read requests pending.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD", - "PEBScounters": "0,1,2,3", "PublicDescription": "For every cycle, increments by the number of outstanding data read requests pending. Data read requests include cacheable demand reads and L2 prefetches, but do not include RFOs, code reads or prefetches to the L3. Reads due to page walks resulting from any request type will also be counted. Requests are considered outstanding from the time they miss the core's L2 cache until the transaction completion message is sent to the requestor.", "SampleAfterValue": "1000003", - "Speculative": "1", "UMask": "0x8" }, { "BriefDescription": "Cycles where at least 1 outstanding data read request is pending.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "CounterMask": "1", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DATA_RD", - "PEBScounters": "0,1,2,3", "PublicDescription": "Cycles where at least 1 outstanding data read request is pending. Data read requests include cacheable demand reads and L2 prefetches, but do not include RFOs, code reads or prefetches to the L3. Reads due to page walks resulting from any request type will also be counted. Requests are considered outstanding from the time they miss the core's L2 cache until the transaction completion message is sent to the requestor.", "SampleAfterValue": "1000003", - "Speculative": "1", "UMask": "0x8" }, { "BriefDescription": "Cycles with outstanding code read requests pending.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "CounterMask": "1", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_CODE_RD", - "PEBScounters": "0,1,2,3", "PublicDescription": "Cycles with outstanding code read requests pending. Code Read requests include both cacheable and non-cacheable Code Reads. Requests are considered outstanding from the time they miss the core's L2 cache until the transaction completion message is sent to the requestor.", "SampleAfterValue": "1000003", - "Speculative": "1", "UMask": "0x2" }, { "BriefDescription": "Cycles where at least 1 outstanding Demand RFO request is pending.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "CounterMask": "1", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_RFO", - "PEBScounters": "0,1,2,3", "PublicDescription": "Cycles where at least 1 outstanding Demand RFO request is pending. RFOs are initiated by a core as part of a data store operation. Demand RFO requests include RFOs, locks, and ItoM transactions. Requests are considered outstanding from the time they miss the core's L2 cache until the transaction completion message is sent to the requestor.", "SampleAfterValue": "1000003", - "Speculative": "1", "UMask": "0x4" }, { "BriefDescription": "For every cycle, increments by the number of outstanding code read requests pending.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_CODE_RD", - "PEBScounters": "0,1,2,3", "PublicDescription": "For every cycle, increments by the number of outstanding code read requests pending. Code Read requests include both cacheable and non-cacheable Code Reads. Requests are considered outstanding from the time they miss the core's L2 cache until the transaction completion message is sent to the requestor.", "SampleAfterValue": "1000003", - "Speculative": "1", "UMask": "0x2" }, { "BriefDescription": "For every cycle, increments by the number of outstanding demand data read requests pending.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD", - "PEBScounters": "0,1,2,3", "PublicDescription": "For every cycle, increments by the number of outstanding demand data read requests pending. Requests are considered outstanding from the time they miss the core's L2 cache until the transaction completion message is sent to the requestor.", "SampleAfterValue": "1000003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Cycles the queue waiting for offcore responses is full.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xf4", "EventName": "SQ_MISC.SQ_FULL", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the cycles for which the thread is active and the queue waiting for responses from the uncore cannot take any more entries.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x4" }, { "BriefDescription": "Number of PREFETCHNTA instructions executed.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x32", "EventName": "SW_PREFETCH_ACCESS.NTA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of PREFETCHNTA instructions executed.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x1" }, { "BriefDescription": "Number of PREFETCHW instructions executed.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x32", "EventName": "SW_PREFETCH_ACCESS.PREFETCHW", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of PREFETCHW instructions executed.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x8" }, { "BriefDescription": "Number of PREFETCHT0 instructions executed.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x32", "EventName": "SW_PREFETCH_ACCESS.T0", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of PREFETCHT0 instructions executed.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x2" }, { "BriefDescription": "Number of PREFETCHT1 or PREFETCHT2 instructions executed.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x32", "EventName": "SW_PREFETCH_ACCESS.T1_T2", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of PREFETCHT1 or PREFETCHT2 instructions executed.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x4" } ]
tools/perf/pmu-events/arch/x86/icelakex/floating-point.json +0 -28
@@ -1,100 +1,72 @@ [ { "BriefDescription": "Counts all microcode FP assists.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc1", "EventName": "ASSISTS.FP", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Counts all microcode Floating Point assists.", "SampleAfterValue": "100003", - "Speculative": "1", "UMask": "0x2" }, { "BriefDescription": "Counts number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 2 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc7", "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 2 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", "SampleAfterValue": "100003", "UMask": "0x4" }, { "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc7", "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", "SampleAfterValue": "100003", "UMask": "0x8" }, { "BriefDescription": "Counts number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc7", "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", "SampleAfterValue": "100003", "UMask": "0x10" }, { "BriefDescription": "Counts number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc7", "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", "SampleAfterValue": "100003", "UMask": "0x20" }, { "BriefDescription": "Counts number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc7", "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", "SampleAfterValue": "100003", "UMask": "0x40" }, { "BriefDescription": "Counts number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 16 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc7", "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 16 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", "SampleAfterValue": "100003", "UMask": "0x80" }, { "BriefDescription": "Counts number of SSE/AVX computational scalar double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc7", "EventName": "FP_ARITH_INST_RETIRED.SCALAR_DOUBLE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Number of SSE/AVX computational scalar double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts number of SSE/AVX computational scalar single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc7", "EventName": "FP_ARITH_INST_RETIRED.SCALAR_SINGLE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Number of SSE/AVX computational scalar single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", "SampleAfterValue": "100003", "UMask": "0x2"
tools/perf/pmu-events/arch/x86/icelakex/frontend.json +0 -140
484 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/icelakex/icx-metrics.json +1079 -1113
1,238 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/icelakex/memory.json +2 -137
139 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/icelakex/other.json +0 -117
117 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/icelakex/pipeline.json +3 -341
344 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/icelakex/uncore-memory.json +784 -1094
1,878 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/icelakex/uncore-other.json +20157 -24987
45,144 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/icelakex/uncore-power.json +42 -73
115 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/icelakex/virtual-memory.json +0 -88
88 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/mapfile.csv +1 -1
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.39.0.314.g84b9a713c41-goog
Part of the diff is not shown here. View the raw message.
Ian Rogers
reviewerPATCH 16/32 perf vendor events intel: Refresh ivybridge metrics and events
In reply to Ian RogersUpdate the ivybridge metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses, use of exponents and removal of redundant operations like "* 1". The events are unchanged but the version number is 23 to match the perfmon version. In the events unused json values are removed. The formatting changes increase consistency across the json files.
--- .../pmu-events/arch/x86/ivybridge/cache.json | 235 ---------------- .../arch/x86/ivybridge/floating-point.json | 34 --- .../arch/x86/ivybridge/frontend.json | 60 ----- .../arch/x86/ivybridge/ivb-metrics.json | 119 +++++---- .../pmu-events/arch/x86/ivybridge/memory.json | 54 ---- .../pmu-events/arch/x86/ivybridge/other.json | 8 - .../arch/x86/ivybridge/pipeline.json | 250 ------------------ .../arch/x86/ivybridge/uncore-cache.json | 50 ---- .../arch/x86/ivybridge/uncore-other.json | 28 +- .../arch/x86/ivybridge/virtual-memory.json | 36 --- tools/perf/pmu-events/arch/x86/mapfile.csv | 2 +- 11 files changed, 76 insertions(+), 800 deletions(-)
tools/perf/pmu-events/arch/x86/ivybridge/cache.json +0 -235
@@ -1,8 +1,6 @@ [ { "BriefDescription": "L1D data line replacements", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x51", "EventName": "L1D.REPLACEMENT", "PublicDescription": "Counts the number of lines brought into the L1 data cache.",
@@ -11,8 +9,6 @@ }, { "BriefDescription": "Cycles a demand request was blocked due to Fill Buffers inavailability", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.FB_FULL",
@@ -22,8 +18,6 @@ }, { "BriefDescription": "L1D miss oustandings duration in cycles", - "Counter": "2", - "CounterHTOff": "2", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.PENDING", "PublicDescription": "Increments the number of outstanding L1D misses every cycle. Set Cmask = 1 and Edge =1 to count occurrences.",
@@ -32,8 +26,6 @@ }, { "BriefDescription": "Cycles with L1D load Misses outstanding.", - "Counter": "2", - "CounterHTOff": "2", "CounterMask": "1", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.PENDING_CYCLES",
@@ -43,8 +35,6 @@ { "AnyThread": "1", "BriefDescription": "Cycles with L1D load Misses outstanding from any thread on physical core", - "Counter": "2", - "CounterHTOff": "2", "CounterMask": "1", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.PENDING_CYCLES_ANY",
@@ -54,8 +44,6 @@ }, { "BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in any state.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x28", "EventName": "L2_L1D_WB_RQSTS.ALL", "SampleAfterValue": "200003",
@@ -63,8 +51,6 @@ }, { "BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in E state", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x28", "EventName": "L2_L1D_WB_RQSTS.HIT_E", "PublicDescription": "Not rejected writebacks from L1D to L2 cache lines in E state.",
@@ -73,8 +59,6 @@ }, { "BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in M state", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x28", "EventName": "L2_L1D_WB_RQSTS.HIT_M", "PublicDescription": "Not rejected writebacks from L1D to L2 cache lines in M state.",
@@ -83,8 +67,6 @@ }, { "BriefDescription": "Count the number of modified Lines evicted from L1 and missed L2. (Non-rejected WBs from the DCU.)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x28", "EventName": "L2_L1D_WB_RQSTS.MISS", "PublicDescription": "Not rejected writebacks that missed LLC.",
@@ -93,8 +75,6 @@ }, { "BriefDescription": "L2 cache lines filling L2", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF1", "EventName": "L2_LINES_IN.ALL", "PublicDescription": "L2 cache lines filling L2.",
@@ -103,8 +83,6 @@ }, { "BriefDescription": "L2 cache lines in E state filling L2", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF1", "EventName": "L2_LINES_IN.E", "PublicDescription": "L2 cache lines in E state filling L2.",
@@ -113,8 +91,6 @@ }, { "BriefDescription": "L2 cache lines in I state filling L2", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF1", "EventName": "L2_LINES_IN.I", "PublicDescription": "L2 cache lines in I state filling L2.",
@@ -123,8 +99,6 @@ }, { "BriefDescription": "L2 cache lines in S state filling L2", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF1", "EventName": "L2_LINES_IN.S", "PublicDescription": "L2 cache lines in S state filling L2.",
@@ -133,8 +107,6 @@ }, { "BriefDescription": "Clean L2 cache lines evicted by demand", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.DEMAND_CLEAN", "PublicDescription": "Clean L2 cache lines evicted by demand.",
@@ -143,8 +115,6 @@ }, { "BriefDescription": "Dirty L2 cache lines evicted by demand", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.DEMAND_DIRTY", "PublicDescription": "Dirty L2 cache lines evicted by demand.",
@@ -153,8 +123,6 @@ }, { "BriefDescription": "Dirty L2 cache lines filling the L2", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.DIRTY_ALL", "PublicDescription": "Dirty L2 cache lines filling the L2.",
@@ -163,8 +131,6 @@ }, { "BriefDescription": "Clean L2 cache lines evicted by L2 prefetch", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.PF_CLEAN", "PublicDescription": "Clean L2 cache lines evicted by the MLC prefetcher.",
@@ -173,8 +139,6 @@ }, { "BriefDescription": "Dirty L2 cache lines evicted by L2 prefetch", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.PF_DIRTY", "PublicDescription": "Dirty L2 cache lines evicted by the MLC prefetcher.",
@@ -183,8 +147,6 @@ }, { "BriefDescription": "L2 code requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_CODE_RD", "PublicDescription": "Counts all L2 code requests.",
@@ -193,8 +155,6 @@ }, { "BriefDescription": "Demand Data Read requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_DEMAND_DATA_RD", "PublicDescription": "Counts any demand and L1 HW prefetch data load requests to L2.",
@@ -203,8 +163,6 @@ }, { "BriefDescription": "Requests from L2 hardware prefetchers", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_PF", "PublicDescription": "Counts all L2 HW prefetcher requests.",
@@ -213,8 +171,6 @@ }, { "BriefDescription": "RFO requests to L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_RFO", "PublicDescription": "Counts all L2 store RFO requests.",
@@ -223,8 +179,6 @@ }, { "BriefDescription": "L2 cache hits when fetching instructions, code reads.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.CODE_RD_HIT", "PublicDescription": "Number of instruction fetches that hit the L2 cache.",
@@ -233,8 +187,6 @@ }, { "BriefDescription": "L2 cache misses when fetching instructions", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.CODE_RD_MISS", "PublicDescription": "Number of instruction fetches that missed the L2 cache.",
@@ -243,8 +195,6 @@ }, { "BriefDescription": "Demand Data Read requests that hit L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT", "PublicDescription": "Demand Data Read requests that hit L2 cache.",
@@ -253,8 +203,6 @@ }, { "BriefDescription": "Requests from the L2 hardware prefetchers that hit L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.PF_HIT", "PublicDescription": "Counts all L2 HW prefetcher requests that hit L2.",
@@ -263,8 +211,6 @@ }, { "BriefDescription": "Requests from the L2 hardware prefetchers that miss L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.PF_MISS", "PublicDescription": "Counts all L2 HW prefetcher requests that missed L2.",
@@ -273,8 +219,6 @@ }, { "BriefDescription": "RFO requests that hit L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.RFO_HIT", "PublicDescription": "RFO requests that hit L2 cache.",
@@ -283,8 +227,6 @@ }, { "BriefDescription": "RFO requests that miss L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.RFO_MISS", "PublicDescription": "Counts the number of store RFO requests that miss the L2 cache.",
@@ -293,8 +235,6 @@ }, { "BriefDescription": "RFOs that access cache lines in any state", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x27", "EventName": "L2_STORE_LOCK_RQSTS.ALL", "PublicDescription": "RFOs that access cache lines in any state.",
@@ -303,8 +243,6 @@ }, { "BriefDescription": "RFOs that hit cache lines in M state", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x27", "EventName": "L2_STORE_LOCK_RQSTS.HIT_M", "PublicDescription": "RFOs that hit cache lines in M state.",
@@ -313,8 +251,6 @@ }, { "BriefDescription": "RFOs that miss cache lines", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x27", "EventName": "L2_STORE_LOCK_RQSTS.MISS", "PublicDescription": "RFOs that miss cache lines.",
@@ -323,8 +259,6 @@ }, { "BriefDescription": "L2 or LLC HW prefetches that access L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF0", "EventName": "L2_TRANS.ALL_PF", "PublicDescription": "Any MLC or LLC HW prefetch accessing L2, including rejects.",
@@ -333,8 +267,6 @@ }, { "BriefDescription": "Transactions accessing L2 pipe", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF0", "EventName": "L2_TRANS.ALL_REQUESTS", "PublicDescription": "Transactions accessing L2 pipe.",
@@ -343,8 +275,6 @@ }, { "BriefDescription": "L2 cache accesses when fetching instructions", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF0", "EventName": "L2_TRANS.CODE_RD", "PublicDescription": "L2 cache accesses when fetching instructions.",
@@ -353,8 +283,6 @@ }, { "BriefDescription": "Demand Data Read requests that access L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF0", "EventName": "L2_TRANS.DEMAND_DATA_RD", "PublicDescription": "Demand Data Read requests that access L2 cache.",
@@ -363,8 +291,6 @@ }, { "BriefDescription": "L1D writebacks that access L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF0", "EventName": "L2_TRANS.L1D_WB", "PublicDescription": "L1D writebacks that access L2 cache.",
@@ -373,8 +299,6 @@ }, { "BriefDescription": "L2 fill requests that access L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF0", "EventName": "L2_TRANS.L2_FILL", "PublicDescription": "L2 fill requests that access L2 cache.",
@@ -383,8 +307,6 @@ }, { "BriefDescription": "L2 writebacks that access L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF0", "EventName": "L2_TRANS.L2_WB", "PublicDescription": "L2 writebacks that access L2 cache.",
@@ -393,8 +315,6 @@ }, { "BriefDescription": "RFO requests that access L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF0", "EventName": "L2_TRANS.RFO", "PublicDescription": "RFO requests that access L2 cache.",
@@ -403,8 +323,6 @@ }, { "BriefDescription": "Cycles when L1D is locked", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x63", "EventName": "LOCK_CYCLES.CACHE_LOCK_DURATION", "PublicDescription": "Cycles in which the L1D is locked.",
@@ -413,8 +331,6 @@ }, { "BriefDescription": "Core-originated cacheable demand requests missed LLC", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x2E", "EventName": "LONGEST_LAT_CACHE.MISS", "PublicDescription": "This event counts each cache miss condition for references to the last level cache.",
@@ -423,8 +339,6 @@ }, { "BriefDescription": "Core-originated cacheable demand requests that refer to LLC", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x2E", "EventName": "LONGEST_LAT_CACHE.REFERENCE", "PublicDescription": "This event counts requests originating from the core that reference a cache line in the last level cache.",
@@ -433,8 +347,6 @@ }, { "BriefDescription": "Retired load uops which data sources were LLC and cross-core snoop hits in on-pkg core cache.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD2", "EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT", "PEBS": "1",
@@ -443,8 +355,6 @@ }, { "BriefDescription": "Retired load uops which data sources were HitM responses from shared LLC.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD2", "EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM", "PEBS": "1",
@@ -453,8 +363,6 @@ }, { "BriefDescription": "Retired load uops which data sources were LLC hit and cross-core snoop missed in on-pkg core cache.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD2", "EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS", "PEBS": "1",
@@ -463,8 +371,6 @@ }, { "BriefDescription": "Retired load uops which data sources were hits in LLC without snoops required.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD2", "EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_NONE", "PEBS": "1",
@@ -473,8 +379,6 @@ }, { "BriefDescription": "Retired load uops which data sources missed LLC but serviced from local dram.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD3", "EventName": "MEM_LOAD_UOPS_LLC_MISS_RETIRED.LOCAL_DRAM", "PublicDescription": "Retired load uops whose data source was local memory (cross-socket snoop not needed or missed).",
@@ -483,8 +387,6 @@ }, { "BriefDescription": "Retired load uops which data sources were load uops missed L1 but hit FB due to preceding miss to the same cache line with data not ready.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.HIT_LFB", "PEBS": "1",
@@ -493,8 +395,6 @@ }, { "BriefDescription": "Retired load uops with L1 cache hits as data sources.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.L1_HIT", "PEBS": "1",
@@ -503,8 +403,6 @@ }, { "BriefDescription": "Retired load uops which data sources following L1 data-cache miss.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.L1_MISS", "PEBS": "1",
@@ -513,8 +411,6 @@ }, { "BriefDescription": "Retired load uops with L2 cache hits as data sources.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.L2_HIT", "PEBS": "1",
@@ -523,8 +419,6 @@ }, { "BriefDescription": "Retired load uops with L2 cache misses as data sources.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.L2_MISS", "PEBS": "1",
@@ -533,8 +427,6 @@ }, { "BriefDescription": "Retired load uops which data sources were data hits in LLC without snoops required.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.LLC_HIT", "PEBS": "1",
@@ -543,8 +435,6 @@ }, { "BriefDescription": "Miss in last-level (L3) cache. Excludes Unknown data-source.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.LLC_MISS", "PEBS": "1",
@@ -553,8 +443,6 @@ }, { "BriefDescription": "All retired load uops. (Precise Event)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.ALL_LOADS", "PEBS": "1",
@@ -563,8 +451,6 @@ }, { "BriefDescription": "All retired store uops. (Precise Event)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.ALL_STORES", "PEBS": "1",
@@ -573,8 +459,6 @@ }, { "BriefDescription": "Retired load uops with locked access. (Precise Event)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.LOCK_LOADS", "PEBS": "1",
@@ -583,8 +467,6 @@ }, { "BriefDescription": "Retired load uops that split across a cacheline boundary. (Precise Event)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.SPLIT_LOADS", "PEBS": "1",
@@ -593,8 +475,6 @@ }, { "BriefDescription": "Retired store uops that split across a cacheline boundary. (Precise Event)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.SPLIT_STORES", "PEBS": "1",
@@ -603,8 +483,6 @@ }, { "BriefDescription": "Retired load uops that miss the STLB. (Precise Event)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.STLB_MISS_LOADS", "PEBS": "1",
@@ -613,8 +491,6 @@ }, { "BriefDescription": "Retired store uops that miss the STLB. (Precise Event)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.STLB_MISS_STORES", "PEBS": "1",
@@ -623,8 +499,6 @@ }, { "BriefDescription": "Demand and prefetch data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.ALL_DATA_RD", "PublicDescription": "Data read requests sent to uncore (demand and prefetch).",
@@ -633,8 +507,6 @@ }, { "BriefDescription": "Cacheable and noncachaeble code read requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.DEMAND_CODE_RD", "PublicDescription": "Demand code read requests sent to uncore.",
@@ -643,8 +515,6 @@ }, { "BriefDescription": "Demand Data Read requests sent to uncore", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.DEMAND_DATA_RD", "PublicDescription": "Demand data read requests sent to uncore.",
@@ -653,8 +523,6 @@ }, { "BriefDescription": "Demand RFO requests including regular RFOs, locks, ItoM", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.DEMAND_RFO", "PublicDescription": "Demand RFO read requests sent to uncore, including regular RFOs, locks, ItoM.",
@@ -663,8 +531,6 @@ }, { "BriefDescription": "Cases when offcore requests buffer cannot take more entries for core", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB2", "EventName": "OFFCORE_REQUESTS_BUFFER.SQ_FULL", "PublicDescription": "Cases when offcore requests buffer cannot take more entries for core.",
@@ -673,8 +539,6 @@ }, { "BriefDescription": "Offcore outstanding cacheable Core Data Read transactions in SuperQueue (SQ), queue to uncore", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD", "PublicDescription": "Offcore outstanding cacheable data read transactions in SQ to uncore. Set Cmask=1 to count cycles.",
@@ -683,8 +547,6 @@ }, { "BriefDescription": "Cycles when offcore outstanding cacheable Core Data Read transactions are present in SuperQueue (SQ), queue to uncore", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DATA_RD",
@@ -694,8 +556,6 @@ }, { "BriefDescription": "Offcore outstanding code reads transactions in SuperQueue (SQ), queue to uncore, every cycle", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_CODE_RD",
@@ -705,8 +565,6 @@ }, { "BriefDescription": "Cycles when offcore outstanding Demand Data Read transactions are present in SuperQueue (SQ), queue to uncore", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_DATA_RD",
@@ -716,8 +574,6 @@ }, { "BriefDescription": "Offcore outstanding demand rfo reads transactions in SuperQueue (SQ), queue to uncore, every cycle", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_RFO",
@@ -727,8 +583,6 @@ }, { "BriefDescription": "Offcore outstanding code reads transactions in SuperQueue (SQ), queue to uncore, every cycle", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_CODE_RD", "PublicDescription": "Offcore outstanding Demand Code Read transactions in SQ to uncore. Set Cmask=1 to count cycles.",
@@ -737,8 +591,6 @@ }, { "BriefDescription": "Offcore outstanding Demand Data Read transactions in uncore queue.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD", "PublicDescription": "Offcore outstanding Demand Data Read transactions in SQ to uncore. Set Cmask=1 to count cycles.",
@@ -747,8 +599,6 @@ }, { "BriefDescription": "Cycles with at least 6 offcore outstanding Demand Data Read transactions in uncore queue", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "6", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD_GE_6",
@@ -758,8 +608,6 @@ }, { "BriefDescription": "Offcore outstanding RFO store transactions in SuperQueue (SQ), queue to uncore", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_RFO", "PublicDescription": "Offcore outstanding RFO store transactions in SQ to uncore. Set Cmask=1 to count cycles.",
@@ -768,332 +616,249 @@ }, { "BriefDescription": "Counts all demand & prefetch code reads that hit in the LLC", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_CODE_RD.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3f803c0244", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand & prefetch code reads that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_CODE_RD.LLC_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003c0244", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x000105B3", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch data reads that hit in the LLC", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3f803c0091", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand & prefetch data reads that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003c0091", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand & prefetch data reads that hit in the LLC and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003c0091", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand & prefetch data reads that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003c0091", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all data/code/rfo references (demand & prefetch)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_READS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x000107F7", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch prefetch RFOs", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_RFO.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x00010122", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch RFOs that hit in the LLC", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3f803c0122", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand & prefetch RFOs that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003c0122", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all writebacks from the core to the LLC", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.COREWB.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10008", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x00010004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads that hit in the LLC", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3f803c0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand code reads that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.LLC_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003c0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x00010001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data reads that hit in the LLC", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3f803c0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003c0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that hit in the LLC and the snoops to sibling cores hit in either E/S state and the line is not forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003c0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003c0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand rfo's", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x00010002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs) that hit in the LLC", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3f803c0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data writes (RFOs) that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003c0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data writes (RFOs) that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003c0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts miscellaneous accesses that include port i/o, MMIO and uncacheable memory accesses. It also includes L2 hints sent to LLC to keep a line from being evicted out of the core caches", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x18000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts requests where the address of an atomic lock instruction spans a cache line boundary or the lock instruction is executed on uncacheable address", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.SPLIT_LOCK_UC_LOCK.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10400", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts non-temporal stores", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.STREAMING_STORES.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10800", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Split locks in SQ", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF4", "EventName": "SQ_MISC.SPLIT_LOCK", "SampleAfterValue": "100003",
tools/perf/pmu-events/arch/x86/ivybridge/floating-point.json +0 -34
@@ -1,8 +1,6 @@ [ { "BriefDescription": "Cycles with any input/output SSE or FP assist", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "CounterMask": "1", "EventCode": "0xCA", "EventName": "FP_ASSIST.ANY",
@@ -12,8 +10,6 @@ }, { "BriefDescription": "Number of SIMD FP assists due to input values", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xCA", "EventName": "FP_ASSIST.SIMD_INPUT", "PublicDescription": "Number of SIMD FP assists due to input values.",
@@ -22,8 +18,6 @@ }, { "BriefDescription": "Number of SIMD FP assists due to Output values", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xCA", "EventName": "FP_ASSIST.SIMD_OUTPUT", "PublicDescription": "Number of SIMD FP assists due to output values.",
@@ -32,8 +26,6 @@ }, { "BriefDescription": "Number of X87 assists due to input value.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xCA", "EventName": "FP_ASSIST.X87_INPUT", "PublicDescription": "Number of X87 FP assists due to input values.",
@@ -42,8 +34,6 @@ }, { "BriefDescription": "Number of X87 assists due to output value.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xCA", "EventName": "FP_ASSIST.X87_OUTPUT", "PublicDescription": "Number of X87 FP assists due to output values.",
@@ -52,8 +42,6 @@ }, { "BriefDescription": "Number of SSE* or AVX-128 FP Computational packed double-precision uops issued this cycle", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x10", "EventName": "FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE", "PublicDescription": "Number of SSE* or AVX-128 FP Computational packed double-precision uops issued this cycle.",
@@ -62,8 +50,6 @@ }, { "BriefDescription": "Number of SSE* or AVX-128 FP Computational packed single-precision uops issued this cycle", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x10", "EventName": "FP_COMP_OPS_EXE.SSE_PACKED_SINGLE", "PublicDescription": "Number of SSE* or AVX-128 FP Computational packed single-precision uops issued this cycle.",
@@ -72,8 +58,6 @@ }, { "BriefDescription": "Number of SSE* or AVX-128 FP Computational scalar double-precision uops issued this cycle", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x10", "EventName": "FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE", "PublicDescription": "Counts number of SSE* or AVX-128 double precision FP scalar uops executed.",
@@ -82,8 +66,6 @@ }, { "BriefDescription": "Number of SSE* or AVX-128 FP Computational scalar single-precision uops issued this cycle", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x10", "EventName": "FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE", "PublicDescription": "Number of SSE* or AVX-128 FP Computational scalar single-precision uops issued this cycle.",
@@ -92,8 +74,6 @@ }, { "BriefDescription": "Number of FP Computational Uops Executed this cycle. The number of FADD, FSUB, FCOM, FMULs, integer MULsand IMULs, FDIVs, FPREMs, FSQRTS, integer DIVs, and IDIVs. This event does not distinguish an FADD used in the middle of a transcendental flow from a s", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x10", "EventName": "FP_COMP_OPS_EXE.X87", "PublicDescription": "Counts number of X87 uops executed.",
@@ -102,8 +82,6 @@ }, { "BriefDescription": "Number of SIMD Move Elimination candidate uops that were eliminated.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x58", "EventName": "MOVE_ELIMINATION.SIMD_ELIMINATED", "SampleAfterValue": "1000003",
@@ -111,8 +89,6 @@ }, { "BriefDescription": "Number of SIMD Move Elimination candidate uops that were not eliminated.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x58", "EventName": "MOVE_ELIMINATION.SIMD_NOT_ELIMINATED", "SampleAfterValue": "1000003",
@@ -120,8 +96,6 @@ }, { "BriefDescription": "Number of GSSE memory assist for stores. GSSE microcode assist is being invoked whenever the hardware is unable to properly handle GSSE-256b operations.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xC1", "EventName": "OTHER_ASSISTS.AVX_STORE", "PublicDescription": "Number of assists associated with 256-bit AVX store operations.",
@@ -130,8 +104,6 @@ }, { "BriefDescription": "Number of transitions from AVX-256 to legacy SSE when penalty applicable.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xC1", "EventName": "OTHER_ASSISTS.AVX_TO_SSE", "SampleAfterValue": "100003",
@@ -139,8 +111,6 @@ }, { "BriefDescription": "Number of transitions from SSE to AVX-256 when penalty applicable.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xC1", "EventName": "OTHER_ASSISTS.SSE_TO_AVX", "SampleAfterValue": "100003",
@@ -148,8 +118,6 @@ }, { "BriefDescription": "number of AVX-256 Computational FP double precision uops issued this cycle", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x11", "EventName": "SIMD_FP_256.PACKED_DOUBLE", "PublicDescription": "Counts 256-bit packed double-precision floating-point instructions.",
@@ -158,8 +126,6 @@ }, { "BriefDescription": "number of GSSE-256 Computational FP single precision uops issued this cycle", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x11", "EventName": "SIMD_FP_256.PACKED_SINGLE", "PublicDescription": "Counts 256-bit packed single-precision floating-point instructions.",
tools/perf/pmu-events/arch/x86/ivybridge/frontend.json +0 -60
240 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/ivybridge/ivb-metrics.json +69 -50
360 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/ivybridge/memory.json +0 -54
220 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/ivybridge/other.json +0 -8
@@ -1,8 +1,6 @@ [ { "BriefDescription": "Unhalted core cycles when the thread is in ring 0", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x5C", "EventName": "CPL_CYCLES.RING0", "PublicDescription": "Unhalted core cycles when the thread is in ring 0.",
@@ -11,8 +9,6 @@ }, { "BriefDescription": "Number of intervals between processor halts while thread is in ring 0", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EdgeDetect": "1", "EventCode": "0x5C",
@@ -23,8 +19,6 @@ }, { "BriefDescription": "Unhalted core cycles when thread is in rings 1, 2, or 3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x5C", "EventName": "CPL_CYCLES.RING123", "PublicDescription": "Unhalted core cycles when the thread is not in ring 0.",
@@ -33,8 +27,6 @@ }, { "BriefDescription": "Cycles when L1 and L2 are locked due to UC or split lock", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x63", "EventName": "LOCK_CYCLES.SPLIT_LOCK_UC_LOCK_DURATION", "PublicDescription": "Cycles in which the L1D and L2 are locked, due to a UC lock or split lock.",
tools/perf/pmu-events/arch/x86/ivybridge/pipeline.json +0 -250
1,000 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/ivybridge/uncore-cache.json +0 -50
72 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/ivybridge/uncore-other.json +6 -22
Lines of this file are not shown. View the raw message.
tools/perf/pmu-events/arch/x86/ivybridge/virtual-memory.json +0 -36
Lines of this file are not shown. View the raw message.
tools/perf/pmu-events/arch/x86/mapfile.csv +1 -1
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.39.0.314.g84b9a713c41-goog
Part of the diff is not shown here. View the raw message.