perf vendor events intel: Refresh elkhartlake events
Subsystems (2)
Ian Rogers
reviewerPATCH 23/32 perf vendor events intel: Refresh sandybridge metrics and events
In reply to Ian RogersUpdate the sandybridge metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses, use of exponents and removal of redundant operations like "* 1". The events are unchanged but unused json values are removed. The formatting changes increase consistency across the json files.
--- .../arch/x86/sandybridge/cache.json | 441 ------------------ .../arch/x86/sandybridge/floating-point.json | 30 -- .../arch/x86/sandybridge/frontend.json | 64 --- .../arch/x86/sandybridge/memory.json | 108 ----- .../arch/x86/sandybridge/other.json | 12 - .../arch/x86/sandybridge/pipeline.json | 257 ---------- .../arch/x86/sandybridge/snb-metrics.json | 83 ++-- .../arch/x86/sandybridge/uncore-cache.json | 50 -- .../arch/x86/sandybridge/uncore-other.json | 28 +- .../arch/x86/sandybridge/virtual-memory.json | 32 -- 10 files changed, 57 insertions(+), 1048 deletions(-)
tools/perf/pmu-events/arch/x86/sandybridge/cache.json +0 -441
@@ -1,8 +1,6 @@ [ { "BriefDescription": "Allocated L1D data cache lines in M state.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x51", "EventName": "L1D.ALLOCATED_IN_M", "SampleAfterValue": "2000003",
@@ -10,8 +8,6 @@ }, { "BriefDescription": "Cache lines in M state evicted out of L1D due to Snoop HitM or dirty line replacement.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x51", "EventName": "L1D.ALL_M_REPLACEMENT", "SampleAfterValue": "2000003",
@@ -19,8 +15,6 @@ }, { "BriefDescription": "L1D data cache lines in M state evicted due to replacement.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x51", "EventName": "L1D.EVICTION", "SampleAfterValue": "2000003",
@@ -28,8 +22,6 @@ }, { "BriefDescription": "L1D data line replacements.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x51", "EventName": "L1D.REPLACEMENT", "PublicDescription": "This event counts L1D data line replacements. Replacements occur when a new line is brought into the cache, causing eviction of a line loaded earlier.",
@@ -38,8 +30,6 @@ }, { "BriefDescription": "Cycles when dispatched loads are cancelled due to L1D bank conflicts with other load ports.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0xBF", "EventName": "L1D_BLOCKS.BANK_CONFLICT_CYCLES",
@@ -48,8 +38,6 @@ }, { "BriefDescription": "Cycles a demand request was blocked due to Fill Buffers inavailability.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.FB_FULL",
@@ -58,8 +46,6 @@ }, { "BriefDescription": "L1D miss oustandings duration in cycles.", - "Counter": "2", - "CounterHTOff": "2", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.PENDING", "SampleAfterValue": "2000003",
@@ -67,8 +53,6 @@ }, { "BriefDescription": "Cycles with L1D load Misses outstanding.", - "Counter": "2", - "CounterHTOff": "2", "CounterMask": "1", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.PENDING_CYCLES",
@@ -78,8 +62,6 @@ { "AnyThread": "1", "BriefDescription": "Cycles with L1D load Misses outstanding from any thread on physical core.", - "Counter": "2", - "CounterHTOff": "2", "CounterMask": "1", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.PENDING_CYCLES_ANY",
@@ -88,8 +70,6 @@ }, { "BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in any state.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x28", "EventName": "L2_L1D_WB_RQSTS.ALL", "SampleAfterValue": "200003",
@@ -97,8 +77,6 @@ }, { "BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in E state.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x28", "EventName": "L2_L1D_WB_RQSTS.HIT_E", "SampleAfterValue": "200003",
@@ -106,8 +84,6 @@ }, { "BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in M state.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x28", "EventName": "L2_L1D_WB_RQSTS.HIT_M", "SampleAfterValue": "200003",
@@ -115,8 +91,6 @@ }, { "BriefDescription": "Not rejected writebacks from L1D to L2 cache lines in S state.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x28", "EventName": "L2_L1D_WB_RQSTS.HIT_S", "SampleAfterValue": "200003",
@@ -124,8 +98,6 @@ }, { "BriefDescription": "Count the number of modified Lines evicted from L1 and missed L2. (Non-rejected WBs from the DCU.).", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x28", "EventName": "L2_L1D_WB_RQSTS.MISS", "SampleAfterValue": "200003",
@@ -133,8 +105,6 @@ }, { "BriefDescription": "L2 cache lines filling L2.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF1", "EventName": "L2_LINES_IN.ALL", "PublicDescription": "This event counts the number of L2 cache lines brought into the L2 cache. Lines are filled into the L2 cache when there was an L2 miss.",
@@ -143,8 +113,6 @@ }, { "BriefDescription": "L2 cache lines in E state filling L2.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF1", "EventName": "L2_LINES_IN.E", "SampleAfterValue": "100003",
@@ -152,8 +120,6 @@ }, { "BriefDescription": "L2 cache lines in I state filling L2.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF1", "EventName": "L2_LINES_IN.I", "SampleAfterValue": "100003",
@@ -161,8 +127,6 @@ }, { "BriefDescription": "L2 cache lines in S state filling L2.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF1", "EventName": "L2_LINES_IN.S", "SampleAfterValue": "100003",
@@ -170,8 +134,6 @@ }, { "BriefDescription": "Clean L2 cache lines evicted by demand.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.DEMAND_CLEAN", "SampleAfterValue": "100003",
@@ -179,8 +141,6 @@ }, { "BriefDescription": "Dirty L2 cache lines evicted by demand.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.DEMAND_DIRTY", "SampleAfterValue": "100003",
@@ -188,8 +148,6 @@ }, { "BriefDescription": "Dirty L2 cache lines filling the L2.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.DIRTY_ALL", "SampleAfterValue": "100003",
@@ -197,8 +155,6 @@ }, { "BriefDescription": "Clean L2 cache lines evicted by L2 prefetch.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.PF_CLEAN", "SampleAfterValue": "100003",
@@ -206,8 +162,6 @@ }, { "BriefDescription": "Dirty L2 cache lines evicted by L2 prefetch.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.PF_DIRTY", "SampleAfterValue": "100003",
@@ -215,8 +169,6 @@ }, { "BriefDescription": "L2 code requests.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_CODE_RD", "SampleAfterValue": "200003",
@@ -224,8 +176,6 @@ }, { "BriefDescription": "Demand Data Read requests.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_DEMAND_DATA_RD", "SampleAfterValue": "200003",
@@ -233,8 +183,6 @@ }, { "BriefDescription": "Requests from L2 hardware prefetchers.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_PF", "SampleAfterValue": "200003",
@@ -242,8 +190,6 @@ }, { "BriefDescription": "RFO requests to L2 cache.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_RFO", "SampleAfterValue": "200003",
@@ -251,8 +197,6 @@ }, { "BriefDescription": "L2 cache hits when fetching instructions, code reads.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.CODE_RD_HIT", "SampleAfterValue": "200003",
@@ -260,8 +204,6 @@ }, { "BriefDescription": "L2 cache misses when fetching instructions.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.CODE_RD_MISS", "SampleAfterValue": "200003",
@@ -269,8 +211,6 @@ }, { "BriefDescription": "Demand Data Read requests that hit L2 cache.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT", "SampleAfterValue": "200003",
@@ -278,8 +218,6 @@ }, { "BriefDescription": "Requests from the L2 hardware prefetchers that hit L2 cache.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.PF_HIT", "SampleAfterValue": "200003",
@@ -287,8 +225,6 @@ }, { "BriefDescription": "Requests from the L2 hardware prefetchers that miss L2 cache.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.PF_MISS", "SampleAfterValue": "200003",
@@ -296,8 +232,6 @@ }, { "BriefDescription": "RFO requests that hit L2 cache.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.RFO_HIT", "SampleAfterValue": "200003",
@@ -305,8 +239,6 @@ }, { "BriefDescription": "RFO requests that miss L2 cache.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.RFO_MISS", "SampleAfterValue": "200003",
@@ -314,8 +246,6 @@ }, { "BriefDescription": "RFOs that access cache lines in any state.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x27", "EventName": "L2_STORE_LOCK_RQSTS.ALL", "SampleAfterValue": "200003",
@@ -323,8 +253,6 @@ }, { "BriefDescription": "RFOs that hit cache lines in E state.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x27", "EventName": "L2_STORE_LOCK_RQSTS.HIT_E", "SampleAfterValue": "200003",
@@ -332,8 +260,6 @@ }, { "BriefDescription": "RFOs that hit cache lines in M state.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x27", "EventName": "L2_STORE_LOCK_RQSTS.HIT_M", "SampleAfterValue": "200003",
@@ -341,8 +267,6 @@ }, { "BriefDescription": "RFOs that miss cache lines.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x27", "EventName": "L2_STORE_LOCK_RQSTS.MISS", "SampleAfterValue": "200003",
@@ -350,8 +274,6 @@ }, { "BriefDescription": "L2 or LLC HW prefetches that access L2 cache.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF0", "EventName": "L2_TRANS.ALL_PF", "SampleAfterValue": "200003",
@@ -359,8 +281,6 @@ }, { "BriefDescription": "Transactions accessing L2 pipe.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF0", "EventName": "L2_TRANS.ALL_REQUESTS", "SampleAfterValue": "200003",
@@ -368,8 +288,6 @@ }, { "BriefDescription": "L2 cache accesses when fetching instructions.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF0", "EventName": "L2_TRANS.CODE_RD", "SampleAfterValue": "200003",
@@ -377,8 +295,6 @@ }, { "BriefDescription": "Demand Data Read requests that access L2 cache.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF0", "EventName": "L2_TRANS.DEMAND_DATA_RD", "SampleAfterValue": "200003",
@@ -386,8 +302,6 @@ }, { "BriefDescription": "L1D writebacks that access L2 cache.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF0", "EventName": "L2_TRANS.L1D_WB", "SampleAfterValue": "200003",
@@ -395,8 +309,6 @@ }, { "BriefDescription": "L2 fill requests that access L2 cache.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF0", "EventName": "L2_TRANS.L2_FILL", "SampleAfterValue": "200003",
@@ -404,8 +316,6 @@ }, { "BriefDescription": "L2 writebacks that access L2 cache.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF0", "EventName": "L2_TRANS.L2_WB", "SampleAfterValue": "200003",
@@ -413,8 +323,6 @@ }, { "BriefDescription": "RFO requests that access L2 cache.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF0", "EventName": "L2_TRANS.RFO", "SampleAfterValue": "200003",
@@ -422,8 +330,6 @@ }, { "BriefDescription": "Cycles when L1D is locked.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x63", "EventName": "LOCK_CYCLES.CACHE_LOCK_DURATION", "SampleAfterValue": "2000003",
@@ -431,8 +337,6 @@ }, { "BriefDescription": "Core-originated cacheable demand requests missed LLC.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x2E", "EventName": "LONGEST_LAT_CACHE.MISS", "SampleAfterValue": "100003",
@@ -440,8 +344,6 @@ }, { "BriefDescription": "Core-originated cacheable demand requests that refer to LLC.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x2E", "EventName": "LONGEST_LAT_CACHE.REFERENCE", "SampleAfterValue": "100003",
@@ -449,8 +351,6 @@ }, { "BriefDescription": "Retired load uops which data sources were LLC and cross-core snoop hits in on-pkg core cache. (Precise Event - PEBS).", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD2", "EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HIT", "PEBS": "1",
@@ -460,8 +360,6 @@ }, { "BriefDescription": "Retired load uops which data sources were HitM responses from shared LLC. (Precise Event - PEBS).", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD2", "EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_HITM", "PEBS": "1",
@@ -471,8 +369,6 @@ }, { "BriefDescription": "Retired load uops which data sources were LLC hit and cross-core snoop missed in on-pkg core cache. (Precise Event - PEBS).", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD2", "EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_MISS", "PEBS": "1",
@@ -481,8 +377,6 @@ }, { "BriefDescription": "Retired load uops which data sources were hits in LLC without snoops required. (Precise Event - PEBS).", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD2", "EventName": "MEM_LOAD_UOPS_LLC_HIT_RETIRED.XSNP_NONE", "PEBS": "1",
@@ -491,8 +385,6 @@ }, { "BriefDescription": "Retired load uops with unknown information as data source in cache serviced the load. (Precise Event - PEBS).", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD4", "EventName": "MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS", "PEBS": "1",
@@ -502,8 +394,6 @@ }, { "BriefDescription": "Retired load uops which data sources were load uops missed L1 but hit FB due to preceding miss to the same cache line with data not ready. (Precise Event - PEBS).", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.HIT_LFB", "PEBS": "1",
@@ -512,8 +402,6 @@ }, { "BriefDescription": "Retired load uops with L1 cache hits as data sources. (Precise Event - PEBS).", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.L1_HIT", "PEBS": "1",
@@ -522,8 +410,6 @@ }, { "BriefDescription": "Retired load uops with L2 cache hits as data sources. (Precise Event - PEBS).", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.L2_HIT", "PEBS": "1",
@@ -532,8 +418,6 @@ }, { "BriefDescription": "Retired load uops which data sources were data hits in LLC without snoops required. (Precise Event - PEBS).", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD1", "EventName": "MEM_LOAD_UOPS_RETIRED.LLC_HIT", "PEBS": "1",
@@ -543,8 +427,6 @@ }, { "BriefDescription": "All retired load uops. (Precise Event - PEBS).", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.ALL_LOADS", "PEBS": "1",
@@ -554,8 +436,6 @@ }, { "BriefDescription": "All retired store uops. (Precise Event - PEBS).", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.ALL_STORES", "PEBS": "1",
@@ -565,8 +445,6 @@ }, { "BriefDescription": "Retired load uops with locked access. (Precise Event - PEBS).", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.LOCK_LOADS", "PEBS": "1",
@@ -575,8 +453,6 @@ }, { "BriefDescription": "Retired load uops that split across a cacheline boundary. (Precise Event - PEBS).", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.SPLIT_LOADS", "PEBS": "1",
@@ -586,8 +462,6 @@ }, { "BriefDescription": "Retired store uops that split across a cacheline boundary. (Precise Event - PEBS).", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.SPLIT_STORES", "PEBS": "1",
@@ -597,8 +471,6 @@ }, { "BriefDescription": "Retired load uops that miss the STLB. (Precise Event - PEBS).", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.STLB_MISS_LOADS", "PEBS": "1",
@@ -607,8 +479,6 @@ }, { "BriefDescription": "Retired store uops that miss the STLB. (Precise Event - PEBS).", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xD0", "EventName": "MEM_UOPS_RETIRED.STLB_MISS_STORES", "PEBS": "1",
@@ -617,8 +487,6 @@ }, { "BriefDescription": "Demand and prefetch data reads.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.ALL_DATA_RD", "SampleAfterValue": "100003",
@@ -626,8 +494,6 @@ }, { "BriefDescription": "Cacheable and noncachaeble code read requests.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.DEMAND_CODE_RD", "SampleAfterValue": "100003",
@@ -635,8 +501,6 @@ }, { "BriefDescription": "Demand Data Read requests sent to uncore.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.DEMAND_DATA_RD", "SampleAfterValue": "100003",
@@ -644,8 +508,6 @@ }, { "BriefDescription": "Demand RFO requests including regular RFOs, locks, ItoM.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.DEMAND_RFO", "SampleAfterValue": "100003",
@@ -653,8 +515,6 @@ }, { "BriefDescription": "Cases when offcore requests buffer cannot take more entries for core.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB2", "EventName": "OFFCORE_REQUESTS_BUFFER.SQ_FULL", "SampleAfterValue": "2000003",
@@ -662,8 +522,6 @@ }, { "BriefDescription": "Offcore outstanding cacheable Core Data Read transactions in SuperQueue (SQ), queue to uncore.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD", "SampleAfterValue": "2000003",
@@ -671,8 +529,6 @@ }, { "BriefDescription": "Cycles when offcore outstanding cacheable Core Data Read transactions are present in SuperQueue (SQ), queue to uncore.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DATA_RD",
@@ -681,8 +537,6 @@ }, { "BriefDescription": "Cycles when offcore outstanding Demand Data Read transactions are present in SuperQueue (SQ), queue to uncore.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_DATA_RD",
@@ -691,8 +545,6 @@ }, { "BriefDescription": "Offcore outstanding demand rfo reads transactions in SuperQueue (SQ), queue to uncore, every cycle.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_RFO",
@@ -701,8 +553,6 @@ }, { "BriefDescription": "Offcore outstanding Demand Data Read transactions in uncore queue.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD", "SampleAfterValue": "2000003",
@@ -710,8 +560,6 @@ }, { "BriefDescription": "Cycles with at least 6 offcore outstanding Demand Data Read transactions in uncore queue.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "6", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD_C6",
@@ -720,8 +568,6 @@ }, { "BriefDescription": "Offcore outstanding RFO store transactions in SuperQueue (SQ), queue to uncore.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_RFO", "SampleAfterValue": "2000003",
@@ -729,1148 +575,861 @@ }, { "BriefDescription": "Counts demand & prefetch code reads that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_CODE_RD.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003c0244", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand & prefetch code reads that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_CODE_RD.LLC_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003c0244", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand & prefetch code reads that hit in the LLC and the snoops sent to sibling cores return clean response.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_CODE_RD.LLC_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003c0244", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch data reads.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x000105B3", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch data reads that hit in the LLC.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3f803c0091", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand & prefetch data reads that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003c0091", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand & prefetch data reads that hit in the LLC and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003c0091", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand & prefetch data reads that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003c0091", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand & prefetch data reads that hit in the LLC and the snoops sent to sibling cores return clean response.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.LLC_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003c0091", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch code reads that hit in the LLC.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3f803c0240", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch code reads that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003c0240", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch code reads that hit in the LLC and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003c0240", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch code reads that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.LLC_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003c0240", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch code reads that hit in the LLC and the snoops sent to sibling cores return clean response.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_CODE_RD.LLC_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003c0240", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch data reads that hit in the LLC.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3f803c0090", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch data reads that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003c0090", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch data reads that hit in the LLC and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003c0090", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch data reads that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.LLC_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003c0090", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch data reads that hit in the LLC and the snoops sent to sibling cores return clean response.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.LLC_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003c0090", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch RFOs that hit in the LLC.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3f803c0120", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch RFOs that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003c0120", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch RFOs that hit in the LLC and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003c0120", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch RFOs that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.LLC_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003c0120", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch RFOs that hit in the LLC and the snoops sent to sibling cores return clean response.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.LLC_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003c0120", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all data/code/rfo references (demand & prefetch) .", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_READS.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x000107F7", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all data/code/rfo reads (demand & prefetch) that hit in the LLC.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3f803c03f7", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts data/code/rfo reads (demand & prefetch) that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003c03f7", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts data/code/rfo reads (demand & prefetch) that hit in the LLC and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003c03f7", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts data/code/rfo reads (demand & prefetch) that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003c03f7", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts data/code/rfo reads (demand & prefetch) that hit in the LLC and the snoops sent to sibling cores return clean response.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_READS.LLC_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003c03f7", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch prefetch RFOs .", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_RFO.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x00010122", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch RFOs that hit in the LLC.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3f803c0122", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand & prefetch RFOs that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003c0122", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand & prefetch RFOs that hit in the LLC and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003c0122", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand & prefetch RFOs that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003c0122", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand & prefetch RFOs that hit in the LLC and the snoops sent to sibling cores return clean response.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_RFO.LLC_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003c0122", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "COREWB & ANY_RESPONSE", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.COREWB.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10008", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "REQUEST = DATA_INTO_CORE and RESPONSE = ANY_RESPONSE", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DATA_IN.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10433", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x00010004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads that hit in the LLC.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3f803c0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand code reads that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003c0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand code reads that hit in the LLC and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003c0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand code reads that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.LLC_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003c0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand code reads that hit in the LLC and the snoops sent to sibling cores return clean response.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.LLC_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003c0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data reads .", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x00010001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data reads that hit in the LLC.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3f803c0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003c0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that hit in the LLC and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003c0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003c0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that hit in the LLC and the snoops sent to sibling cores return clean response.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.LLC_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003c0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand rfo's .", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x00010002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs) that hit in the LLC.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3f803c0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data writes (RFOs) that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003c0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data writes (RFOs) that hit in the LLC and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003c0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data writes (RFOs) that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003c0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data writes (RFOs) that hit in the LLC and the snoops sent to sibling cores return clean response.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003c0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "REQUEST = DEMAND_RFO and RESPONSE = LLC_HIT_M and SNOOP = HITM", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.LLC_HIT_M.HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000040002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts miscellaneous accesses that include port i/o, MMIO and uncacheable memory accesses. It also includes L2 hints sent to LLC to keep a line from being evicted out of the core caches.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x18000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 hints sent to LLC to keep a line from being evicted out of the core caches.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.LRU_HINTS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x803c8000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts miscellaneous accesses that include port i/o, MMIO and uncacheable memory accesses.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.PORTIO_MMIO_UC", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2380408000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "REQUEST = PF_RFO and RESPONSE = ANY_RESPONSE", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_IFETCH.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10040", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to L2) code reads that hit in the LLC.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3f803c0040", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to L2) code reads that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003c0040", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to L2) code reads that hit in the LLC and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003c0040", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to L2) code reads that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.LLC_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003c0040", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to L2) code reads that hit in the LLC and the snoops sent to sibling cores return clean response.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.LLC_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003c0040", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to L2) data reads that hit in the LLC.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3f803c0010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003c0010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the LLC and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003c0010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.LLC_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003c0010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the LLC and the snoops sent to sibling cores return clean response.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.LLC_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003c0010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the LLC.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3f803c0020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to L2) RFOs that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003c0020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to L2) RFOs that hit in the LLC and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003c0020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to L2) RFOs that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.LLC_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003c0020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to L2) RFOs that hit in the LLC and the snoops sent to sibling cores return clean response.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.LLC_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003c0020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to LLC only) code reads that hit in the LLC.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_LLC_CODE_RD.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3f803c0200", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_LLC_CODE_RD.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003c0200", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the LLC and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_LLC_CODE_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003c0200", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_LLC_CODE_RD.LLC_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003c0200", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to LLC only) code reads that hit in the LLC and the snoops sent to sibling cores return clean response.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_LLC_CODE_RD.LLC_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003c0200", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the LLC.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_LLC_DATA_RD.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3f803c0080", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to LLC only) data reads that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_LLC_DATA_RD.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003c0080", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to LLC only) data reads that hit in the LLC and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_LLC_DATA_RD.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003c0080", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to LLC only) data reads that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_LLC_DATA_RD.LLC_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003c0080", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to LLC only) data reads that hit in the LLC and the snoops sent to sibling cores return clean response.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_LLC_DATA_RD.LLC_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003c0080", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the LLC.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_LLC_RFO.LLC_HIT.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3f803c0100", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to LLC only) RFOs that hit in the LLC and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_LLC_RFO.LLC_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003c0100", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to LLC only) RFOs that hit in the LLC and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_LLC_RFO.LLC_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003c0100", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to LLC only) RFOs that hit in the LLC and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_LLC_RFO.LLC_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003c0100", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to LLC only) RFOs that hit in the LLC and the snoops sent to sibling cores return clean response.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_LLC_RFO.LLC_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003c0100", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "REQUEST = PF_LLC_DATA_RD and RESPONSE = ANY_RESPONSE", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L_DATA_RD.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10080", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "REQUEST = PF_LLC_IFETCH and RESPONSE = ANY_RESPONSE", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L_IFETCH.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10200", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts requests where the address of an atomic lock instruction spans a cache line boundary or the lock instruction is executed on uncacheable address.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.SPLIT_LOCK_UC_LOCK.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10400", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts non-temporal stores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.STREAMING_STORES.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10800", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Split locks in SQ.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF4", "EventName": "SQ_MISC.SPLIT_LOCK", "SampleAfterValue": "100003",
tools/perf/pmu-events/arch/x86/sandybridge/floating-point.json +0 -30
@@ -1,8 +1,6 @@ [ { "BriefDescription": "Cycles with any input/output SSE or FP assist.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "CounterMask": "1", "EventCode": "0xCA", "EventName": "FP_ASSIST.ANY",
@@ -11,8 +9,6 @@ }, { "BriefDescription": "Number of SIMD FP assists due to input values.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xCA", "EventName": "FP_ASSIST.SIMD_INPUT", "SampleAfterValue": "100003",
@@ -20,8 +16,6 @@ }, { "BriefDescription": "Number of SIMD FP assists due to Output values.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xCA", "EventName": "FP_ASSIST.SIMD_OUTPUT", "SampleAfterValue": "100003",
@@ -29,8 +23,6 @@ }, { "BriefDescription": "Number of X87 assists due to input value.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xCA", "EventName": "FP_ASSIST.X87_INPUT", "SampleAfterValue": "100003",
@@ -38,8 +30,6 @@ }, { "BriefDescription": "Number of X87 assists due to output value.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xCA", "EventName": "FP_ASSIST.X87_OUTPUT", "SampleAfterValue": "100003",
@@ -47,8 +37,6 @@ }, { "BriefDescription": "Number of SSE* or AVX-128 FP Computational packed double-precision uops issued this cycle.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x10", "EventName": "FP_COMP_OPS_EXE.SSE_PACKED_DOUBLE", "SampleAfterValue": "2000003",
@@ -56,8 +44,6 @@ }, { "BriefDescription": "Number of SSE* or AVX-128 FP Computational packed single-precision uops issued this cycle.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x10", "EventName": "FP_COMP_OPS_EXE.SSE_PACKED_SINGLE", "SampleAfterValue": "2000003",
@@ -65,8 +51,6 @@ }, { "BriefDescription": "Number of SSE* or AVX-128 FP Computational scalar double-precision uops issued this cycle.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x10", "EventName": "FP_COMP_OPS_EXE.SSE_SCALAR_DOUBLE", "SampleAfterValue": "2000003",
@@ -74,8 +58,6 @@ }, { "BriefDescription": "Number of SSE* or AVX-128 FP Computational scalar single-precision uops issued this cycle.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x10", "EventName": "FP_COMP_OPS_EXE.SSE_SCALAR_SINGLE", "SampleAfterValue": "2000003",
@@ -83,8 +65,6 @@ }, { "BriefDescription": "Number of FP Computational Uops Executed this cycle. The number of FADD, FSUB, FCOM, FMULs, integer MULsand IMULs, FDIVs, FPREMs, FSQRTS, integer DIVs, and IDIVs. This event does not distinguish an FADD used in the middle of a transcendental flow from a s.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x10", "EventName": "FP_COMP_OPS_EXE.X87", "SampleAfterValue": "2000003",
@@ -92,8 +72,6 @@ }, { "BriefDescription": "Number of GSSE memory assist for stores. GSSE microcode assist is being invoked whenever the hardware is unable to properly handle GSSE-256b operations.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xC1", "EventName": "OTHER_ASSISTS.AVX_STORE", "SampleAfterValue": "100003",
@@ -101,8 +79,6 @@ }, { "BriefDescription": "Number of transitions from AVX-256 to legacy SSE when penalty applicable.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xC1", "EventName": "OTHER_ASSISTS.AVX_TO_SSE", "SampleAfterValue": "100003",
@@ -110,8 +86,6 @@ }, { "BriefDescription": "Number of transitions from SSE to AVX-256 when penalty applicable.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xC1", "EventName": "OTHER_ASSISTS.SSE_TO_AVX", "SampleAfterValue": "100003",
@@ -119,8 +93,6 @@ }, { "BriefDescription": "Number of AVX-256 Computational FP double precision uops issued this cycle.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x11", "EventName": "SIMD_FP_256.PACKED_DOUBLE", "SampleAfterValue": "2000003",
@@ -128,8 +100,6 @@ }, { "BriefDescription": "Number of GSSE-256 Computational FP single precision uops issued this cycle.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x11", "EventName": "SIMD_FP_256.PACKED_SINGLE", "SampleAfterValue": "2000003",
tools/perf/pmu-events/arch/x86/sandybridge/frontend.json +0 -64
256 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/sandybridge/memory.json +0 -108
438 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/sandybridge/other.json +0 -12
@@ -1,8 +1,6 @@ [ { "BriefDescription": "Unhalted core cycles when the thread is in ring 0.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x5C", "EventName": "CPL_CYCLES.RING0", "SampleAfterValue": "2000003",
@@ -10,8 +8,6 @@ }, { "BriefDescription": "Number of intervals between processor halts while thread is in ring 0.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EdgeDetect": "1", "EventCode": "0x5C",
@@ -21,8 +17,6 @@ }, { "BriefDescription": "Unhalted core cycles when thread is in rings 1, 2, or 3.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x5C", "EventName": "CPL_CYCLES.RING123", "SampleAfterValue": "2000003",
@@ -30,8 +24,6 @@ }, { "BriefDescription": "Hardware Prefetch requests that miss the L1D cache. This accounts for both L1 streamer and IP-based (IPP) HW prefetchers. A request is being counted each time it access the cache & miss it, including if a block is applicable or if hit the Fill Buffer for .", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x4E", "EventName": "HW_PRE_REQ.DL1_MISS", "SampleAfterValue": "2000003",
@@ -39,8 +31,6 @@ }, { "BriefDescription": "Valid instructions written to IQ per cycle.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x17", "EventName": "INSTS_WRITTEN_TO_IQ.INSTS", "SampleAfterValue": "2000003",
@@ -48,8 +38,6 @@ }, { "BriefDescription": "Cycles when L1 and L2 are locked due to UC or split lock.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x63", "EventName": "LOCK_CYCLES.SPLIT_LOCK_UC_LOCK_DURATION", "SampleAfterValue": "2000003",
tools/perf/pmu-events/arch/x86/sandybridge/pipeline.json +0 -257
374 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/sandybridge/snb-metrics.json +51 -32
83 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/sandybridge/uncore-cache.json +0 -50
50 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/sandybridge/uncore-other.json +6 -22
Lines of this file are not shown. View the raw message.
tools/perf/pmu-events/arch/x86/sandybridge/virtual-memory.json +0 -32
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.39.0.314.g84b9a713c41-goog
Part of the diff is not shown here. View the raw message.
Ian Rogers
reviewerPATCH 24/32 perf vendor events intel: Refresh sapphirerapids metrics and events
In reply to Ian RogersUpdate the sapphirerapids metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses, use of exponents and removal of redundant operations like "* 1". The order of metrics varies as TMA metrics are first converted and then removed if perfmon versions are found. The events are updated to 1.09, in particular uncore, with fixes to uncore events and improved descriptions. The formatting changes increase consistency across the json files.
--- tools/perf/pmu-events/arch/x86/mapfile.csv | 2 +- .../arch/x86/sapphirerapids/cache.json | 350 +- .../x86/sapphirerapids/floating-point.json | 63 - .../arch/x86/sapphirerapids/frontend.json | 144 - .../arch/x86/sapphirerapids/memory.json | 125 +- .../arch/x86/sapphirerapids/other.json | 91 +- .../arch/x86/sapphirerapids/pipeline.json | 424 +- .../arch/x86/sapphirerapids/spr-metrics.json | 2309 +++--- .../x86/sapphirerapids/uncore-memory.json | 526 +- .../arch/x86/sapphirerapids/uncore-other.json | 6606 ++++++++--------- .../arch/x86/sapphirerapids/uncore-power.json | 84 +- .../x86/sapphirerapids/virtual-memory.json | 80 - 12 files changed, 4483 insertions(+), 6321 deletions(-)
tools/perf/pmu-events/arch/x86/mapfile.csv +1 -1
@@ -21,7 +21,7 @@ GenuineIntel-6-A[AC],v1.00,meteorlake,core GenuineIntel-6-1[AEF],v3,nehalemep,core GenuineIntel-6-2E,v3,nehalemex,core GenuineIntel-6-2A,v17,sandybridge,core -GenuineIntel-6-8F,v1.06,sapphirerapids,core +GenuineIntel-6-8F,v1.09,sapphirerapids,core GenuineIntel-6-(37|4A|4C|4D|5A),v14,silvermont,core GenuineIntel-6-(4E|5E|8E|9E|A5|A6),v53,skylake,core GenuineIntel-6-55-[01234],v1.28,skylakex,core
tools/perf/pmu-events/arch/x86/sapphirerapids/cache.json +28 -322
1,220 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/sapphirerapids/floating-point.json +0 -63
222 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/sapphirerapids/frontend.json +0 -144
498 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/sapphirerapids/memory.json +15 -110
447 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/sapphirerapids/other.json +2 -89
430 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/sapphirerapids/pipeline.json +6 -418
175 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/sapphirerapids/spr-metrics.json +1141 -1168
2,309 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/sapphirerapids/uncore-memory.json +244 -282
526 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/sapphirerapids/uncore-other.json +2965 -3641
6,606 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/sapphirerapids/uncore-power.json +81 -3
84 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/sapphirerapids/virtual-memory.json +0 -80
80 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.39.0.314.g84b9a713c41-goog
Part of the diff is not shown here. View the raw message.
Ian Rogers
reviewerPATCH 25/32 perf vendor events intel: Refresh silvermont events
In reply to Ian RogersUpdate the silvermont events using the new tooling from:
https://github.com/intel/perfmon
The events are unchanged but unused json values are removed. This increases consistency across the json files.
--- .../pmu-events/arch/x86/silvermont/cache.json | 133 ------------------ .../arch/x86/silvermont/floating-point.json | 1 - .../arch/x86/silvermont/frontend.json | 8 -- .../arch/x86/silvermont/memory.json | 1 - .../pmu-events/arch/x86/silvermont/other.json | 2 - .../arch/x86/silvermont/pipeline.json | 35 ----- .../arch/x86/silvermont/virtual-memory.json | 7 - 7 files changed, 187 deletions(-)
tools/perf/pmu-events/arch/x86/silvermont/cache.json +0 -133
@@ -1,7 +1,6 @@ [ { "BriefDescription": "Counts the number of request that were not accepted into the L2Q because the L2Q is FULL.", - "Counter": "0,1", "EventCode": "0x31", "EventName": "CORE_REJECT_L2Q.ALL", "PublicDescription": "Counts the number of (demand and L1 prefetchers) core requests rejected by the L2Q due to a full or nearly full w condition which likely indicates back pressure from L2Q. It also counts requests that would have gone directly to the XQ, but are rejected due to a full or nearly full condition, indicating back pressure from the IDI link. The L2Q may also reject transactions from a core to insure fairness between cores, or to delay a core?s dirty eviction when the address conflicts incoming external snoops. (Note that L2 prefetcher requests that are dropped are not counted by this event.)",
@@ -9,7 +8,6 @@ }, { "BriefDescription": "Cycles code-fetch stalled due to an outstanding ICache miss.", - "Counter": "0,1", "EventCode": "0x86", "EventName": "FETCH_STALL.ICACHE_FILL_PENDING_CYCLES", "PublicDescription": "Counts cycles that fetch is stalled due to an outstanding ICache miss. That is, the decoder queue is able to accept bytes, but the fetch unit is unable to provide bytes due to an ICache miss. Note: this event is not the same as the total number of cycles spent retrieving instruction cache lines from the memory hierarchy.\r\nCounts cycles that fetch is stalled due to any reason. That is, the decoder queue is able to accept bytes, but the fetch unit is unable to provide bytes. This will include cycles due to an ITLB miss, ICache miss and other events.",
@@ -18,7 +16,6 @@ }, { "BriefDescription": "Counts the number of request from the L2 that were not accepted into the XQ", - "Counter": "0,1", "EventCode": "0x30", "EventName": "L2_REJECT_XQ.ALL", "PublicDescription": "This event counts the number of demand and prefetch transactions that the L2 XQ rejects due to a full or near full condition which likely indicates back pressure from the IDI link. The XQ may reject transactions from the L2Q (non-cacheable requests), BBS (L2 misses) and WOB (L2 write-back victims).",
@@ -26,7 +23,6 @@ }, { "BriefDescription": "L2 cache request misses", - "Counter": "0,1", "EventCode": "0x2E", "EventName": "LONGEST_LAT_CACHE.MISS", "PublicDescription": "This event counts the total number of L2 cache references and the number of L2 cache misses respectively.",
@@ -35,7 +31,6 @@ }, { "BriefDescription": "L2 cache requests from this core", - "Counter": "0,1", "EventCode": "0x2E", "EventName": "LONGEST_LAT_CACHE.REFERENCE", "PublicDescription": "This event counts requests originating from the core that references a cache line in the L2 cache.",
@@ -44,7 +39,6 @@ }, { "BriefDescription": "All Loads", - "Counter": "0,1", "EventCode": "0x04", "EventName": "MEM_UOPS_RETIRED.ALL_LOADS", "PublicDescription": "This event counts the number of load ops retired.",
@@ -53,7 +47,6 @@ }, { "BriefDescription": "All Stores", - "Counter": "0,1", "EventCode": "0x04", "EventName": "MEM_UOPS_RETIRED.ALL_STORES", "PublicDescription": "This event counts the number of store ops retired.",
@@ -62,7 +55,6 @@ }, { "BriefDescription": "Cross core or cross module hitm", - "Counter": "0,1", "EventCode": "0x04", "EventName": "MEM_UOPS_RETIRED.HITM", "PEBS": "1",
@@ -72,7 +64,6 @@ }, { "BriefDescription": "Loads missed L1", - "Counter": "0,1", "EventCode": "0x04", "EventName": "MEM_UOPS_RETIRED.L1_MISS_LOADS", "PublicDescription": "This event counts the number of load ops retired that miss in L1 Data cache. Note that prefetch misses will not be counted.",
@@ -81,7 +72,6 @@ }, { "BriefDescription": "Loads hit L2", - "Counter": "0,1", "EventCode": "0x04", "EventName": "MEM_UOPS_RETIRED.L2_HIT_LOADS", "PEBS": "1",
@@ -91,7 +81,6 @@ }, { "BriefDescription": "Loads missed L2", - "Counter": "0,1", "EventCode": "0x04", "EventName": "MEM_UOPS_RETIRED.L2_MISS_LOADS", "PEBS": "1",
@@ -101,7 +90,6 @@ }, { "BriefDescription": "Loads missed UTLB", - "Counter": "0,1", "EventCode": "0x04", "EventName": "MEM_UOPS_RETIRED.UTLB_MISS", "PublicDescription": "This event counts the number of load ops retired that had UTLB miss.",
@@ -110,7 +98,6 @@ }, { "BriefDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE", "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
@@ -119,623 +106,510 @@ }, { "BriefDescription": "Counts any code reads (demand & prefetch) that have any response type.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0000010044", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any code reads (demand & prefetch) that miss L2.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1680000044", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any code reads (demand & prefetch) that hit in the other module where modified copies were found in other core's L1 cache.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000000044", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any code reads (demand & prefetch) that miss L2 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0400000044", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any code reads (demand & prefetch) that miss L2 with a snoop miss response.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_CODE_RD.L2_MISS.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0200000044", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any data read (demand & prefetch) that have any response type.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0000013091", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any data read (demand & prefetch) that miss L2.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1680003091", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any data read (demand & prefetch) that hit in the other module where modified copies were found in other core's L1 cache.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000003091", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any data read (demand & prefetch) that miss L2 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0400003091", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any data read (demand & prefetch) that miss L2 with a snoop miss response.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_DATA_RD.L2_MISS.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0200003091", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any request that have any response type.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0000018008", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any request that hit in the other module where modified copies were found in other core's L1 cache.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000008008", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any request that miss L2 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0400008008", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any request that miss L2 with a snoop miss response.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_REQUEST.L2_MISS.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0200008008", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any rfo reads (demand & prefetch) that have any response type.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_RFO.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0000010022", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any rfo reads (demand & prefetch) that miss L2.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1680000022", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any rfo reads (demand & prefetch) that hit in the other module where modified copies were found in other core's L1 cache.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000000022", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any rfo reads (demand & prefetch) that miss L2 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0400000022", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts any rfo reads (demand & prefetch) that miss L2 with a snoop miss response.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.ANY_RFO.L2_MISS.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0200000022", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts writeback (modified to exclusive) that miss L2.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.COREWB.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1680000008", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts writeback (modified to exclusive) that miss L2 with no details on snoop-related information.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.COREWB.L2_MISS.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0080000008", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand and DCU prefetch instruction cacheline that have any response type.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0000010004", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand and DCU prefetch instruction cacheline that miss L2.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1680000004", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand and DCU prefetch instruction cacheline that miss L2 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0400000004", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand and DCU prefetch instruction cacheline that miss L2 with a snoop miss response.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L2_MISS.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0200000004", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand and DCU prefetch instruction cacheline that are are outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.OUTSTANDING", "MSRIndex": "0x1a6", "MSRValue": "0x4000000004", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand and DCU prefetch data read that have any response type.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0000010001", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand and DCU prefetch data read that miss L2.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1680000001", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand and DCU prefetch data read that hit in the other module where modified copies were found in other core's L1 cache.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000000001", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand and DCU prefetch data read that miss L2 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0400000001", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand and DCU prefetch data read that miss L2 with a snoop miss response.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L2_MISS.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0200000001", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand and DCU prefetch data read that are are outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.OUTSTANDING", "MSRIndex": "0x1a6", "MSRValue": "0x4000000001", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand and DCU prefetch RFOs that miss L2.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1680000002", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand and DCU prefetch RFOs that hit in the other module where modified copies were found in other core's L1 cache.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000000002", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand and DCU prefetch RFOs that miss L2 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0400000002", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand and DCU prefetch RFOs that miss L2 with a snoop miss response.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L2_MISS.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0200000002", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand and DCU prefetch RFOs that are are outstanding, per cycle, from the time of the L2 miss to when any response is received.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.OUTSTANDING", "MSRIndex": "0x1a6", "MSRValue": "0x4000000002", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads of partial cache lines (including UC and WC) that miss L2.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PARTIAL_READS.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1680000080", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Countsof demand RFO requests to write to partial cache lines that miss L2.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PARTIAL_WRITES.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1680000100", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts DCU hardware prefetcher data read that have any response type.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0000012000", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts DCU hardware prefetcher data read that miss L2.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1680002000", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts DCU hardware prefetcher data read that hit in the other module where modified copies were found in other core's L1 cache.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000002000", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts DCU hardware prefetcher data read that miss L2 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0400002000", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts DCU hardware prefetcher data read that miss L2 with a snoop miss response.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L1_DATA_RD.L2_MISS.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0200002000", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts code reads generated by L2 prefetchers that miss L2.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1680000040", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts code reads generated by L2 prefetchers that miss L2 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0400000040", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts code reads generated by L2 prefetchers that miss L2 with a snoop miss response.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_CODE_RD.L2_MISS.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0200000040", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cacheline reads generated by L2 prefetchers that miss L2.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1680000010", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cacheline reads generated by L2 prefetchers that hit in the other module where modified copies were found in other core's L1 cache.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000000010", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cacheline reads generated by L2 prefetchers that miss L2 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0400000010", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts data cacheline reads generated by L2 prefetchers that miss L2 with a snoop miss response.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L2_MISS.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0200000010", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts RFO requests generated by L2 prefetchers that miss L2.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1680000020", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts RFO requests generated by L2 prefetchers that hit in the other module where modified copies were found in other core's L1 cache.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_MISS.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000000020", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts RFO requests generated by L2 prefetchers that miss L2 and the snoops to sibling cores hit in either E/S state and the line is not forwarded.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_MISS.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0400000020", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts RFO requests generated by L2 prefetchers that miss L2 with a snoop miss response.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L2_MISS.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x0200000020", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Counts streaming store that miss L2.", - "Counter": "0,1", "EventCode": "0xB7", "EventName": "OFFCORE_RESPONSE.STREAMING_STORES.L2_MISS.ANY", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1680004800", - "Offcore": "1", "SampleAfterValue": "100007", "UMask": "0x1" }, { "BriefDescription": "Any reissued load uops", - "Counter": "0,1", "EventCode": "0x03", "EventName": "REHABQ.ANY_LD", "PublicDescription": "This event counts the number of load uops reissued from Rehabq.",
@@ -744,7 +618,6 @@ }, { "BriefDescription": "Any reissued store uops", - "Counter": "0,1", "EventCode": "0x03", "EventName": "REHABQ.ANY_ST", "PublicDescription": "This event counts the number of store uops reissued from Rehabq.",
@@ -753,7 +626,6 @@ }, { "BriefDescription": "Loads blocked due to store data not ready", - "Counter": "0,1", "EventCode": "0x03", "EventName": "REHABQ.LD_BLOCK_STD_NOTREADY", "PublicDescription": "This event counts the cases where a forward was technically possible, but did not occur because the store data was not available at the right time.",
@@ -762,7 +634,6 @@ }, { "BriefDescription": "Loads blocked due to store forward restriction", - "Counter": "0,1", "EventCode": "0x03", "EventName": "REHABQ.LD_BLOCK_ST_FORWARD", "PEBS": "1",
@@ -772,7 +643,6 @@ }, { "BriefDescription": "Load uops that split cache line boundary", - "Counter": "0,1", "EventCode": "0x03", "EventName": "REHABQ.LD_SPLITS", "PEBS": "1",
@@ -782,7 +652,6 @@ }, { "BriefDescription": "Uops with lock semantics", - "Counter": "0,1", "EventCode": "0x03", "EventName": "REHABQ.LOCK", "PublicDescription": "This event counts the number of retired memory operations with lock semantics. These are either implicit locked instructions such as the XCHG instruction or instructions with an explicit LOCK prefix (0xF0).",
@@ -791,7 +660,6 @@ }, { "BriefDescription": "Store address buffer full", - "Counter": "0,1", "EventCode": "0x03", "EventName": "REHABQ.STA_FULL", "PublicDescription": "This event counts the number of retired stores that are delayed because there is not a store address buffer available.",
@@ -800,7 +668,6 @@ }, { "BriefDescription": "Store uops that split cache line boundary", - "Counter": "0,1", "EventCode": "0x03", "EventName": "REHABQ.ST_SPLITS", "PublicDescription": "This event counts the number of retire stores that experienced cache line boundary splits.",
tools/perf/pmu-events/arch/x86/silvermont/floating-point.json +0 -1
@@ -1,7 +1,6 @@ [ { "BriefDescription": "Stalls due to FP assists", - "Counter": "0,1", "EventCode": "0xC3", "EventName": "MACHINE_CLEARS.FP_ASSIST", "PublicDescription": "This event counts the number of times that pipeline stalled due to FP operations needing assists.",
tools/perf/pmu-events/arch/x86/silvermont/frontend.json +0 -8
@@ -1,7 +1,6 @@ [ { "BriefDescription": "Counts the number of baclears", - "Counter": "0,1", "EventCode": "0xE6", "EventName": "BACLEARS.ALL", "PublicDescription": "The BACLEARS event counts the number of times the front end is resteered, mainly when the Branch Prediction Unit cannot provide a correct prediction and this is corrected by the Branch Address Calculator at the front end. The BACLEARS.ANY event counts the number of baclears for any type of branch.",
@@ -10,7 +9,6 @@ }, { "BriefDescription": "Counts the number of JCC baclears", - "Counter": "0,1", "EventCode": "0xE6", "EventName": "BACLEARS.COND", "PublicDescription": "The BACLEARS event counts the number of times the front end is resteered, mainly when the Branch Prediction Unit cannot provide a correct prediction and this is corrected by the Branch Address Calculator at the front end. The BACLEARS.COND event counts the number of JCC (Jump on Condtional Code) baclears.",
@@ -19,7 +17,6 @@ }, { "BriefDescription": "Counts the number of RETURN baclears", - "Counter": "0,1", "EventCode": "0xE6", "EventName": "BACLEARS.RETURN", "PublicDescription": "The BACLEARS event counts the number of times the front end is resteered, mainly when the Branch Prediction Unit cannot provide a correct prediction and this is corrected by the Branch Address Calculator at the front end. The BACLEARS.RETURN event counts the number of RETURN baclears.",
@@ -28,7 +25,6 @@ }, { "BriefDescription": "Counts the number of times a decode restriction reduced the decode throughput due to wrong instruction length prediction", - "Counter": "0,1", "EventCode": "0xE9", "EventName": "DECODE_RESTRICTION.PREDECODE_WRONG", "PublicDescription": "Counts the number of times a decode restriction reduced the decode throughput due to wrong instruction length prediction.",
@@ -37,7 +33,6 @@ }, { "BriefDescription": "Instruction fetches", - "Counter": "0,1", "EventCode": "0x80", "EventName": "ICACHE.ACCESSES", "PublicDescription": "This event counts all instruction fetches, not including most uncacheable\r\nfetches.",
@@ -46,7 +41,6 @@ }, { "BriefDescription": "Instruction fetches from Icache", - "Counter": "0,1", "EventCode": "0x80", "EventName": "ICACHE.HIT", "PublicDescription": "This event counts all instruction fetches from the instruction cache.",
@@ -55,7 +49,6 @@ }, { "BriefDescription": "Icache miss", - "Counter": "0,1", "EventCode": "0x80", "EventName": "ICACHE.MISSES", "PublicDescription": "This event counts all instruction fetches that miss the Instruction cache or produce memory requests. This includes uncacheable fetches. An instruction fetch miss is counted only once and not once for every cycle it is outstanding.",
@@ -64,7 +57,6 @@ }, { "BriefDescription": "Counts the number of times entered into a ucode flow in the FEC. Includes inserted flows due to front-end detected faults or assists. Speculative count.", - "Counter": "0,1", "EventCode": "0xE7", "EventName": "MS_DECODED.MS_ENTRY", "PublicDescription": "Counts the number of times the MSROM starts a flow of UOPS. It does not count every time a UOP is read from the microcode ROM. The most common case that this counts is when a micro-coded instruction is encountered by the front end of the machine. Other cases include when an instruction encounters a fault, trap, or microcode assist of any sort. The event will count MSROM startups for UOPS that are speculative, and subsequently cleared by branch mispredict or machine clear. Background: UOPS are produced by two mechanisms. Either they are generated by hardware that decodes instructions into UOPS, or they are delivered by a ROM (called the MSROM) that holds UOPS associated with a specific instruction. MSROM UOPS might also be delivered in response to some condition such as a fault or other exceptional condition. This event is an excellent mechanism for detecting instructions that require the use of MSROM instructions.",
tools/perf/pmu-events/arch/x86/silvermont/memory.json +0 -1
@@ -1,7 +1,6 @@ [ { "BriefDescription": "Stalls due to Memory ordering", - "Counter": "0,1", "EventCode": "0xC3", "EventName": "MACHINE_CLEARS.MEMORY_ORDERING", "PublicDescription": "This event counts the number of times that pipeline was cleared due to memory ordering issues.",
tools/perf/pmu-events/arch/x86/silvermont/other.json +0 -2
@@ -1,7 +1,6 @@ [ { "BriefDescription": "Cycles code-fetch stalled due to any reason.", - "Counter": "0,1", "EventCode": "0x86", "EventName": "FETCH_STALL.ALL", "PublicDescription": "Counts cycles that fetch is stalled due to any reason. That is, the decoder queue is able to accept bytes, but the fetch unit is unable to provide bytes. This will include cycles due to an ITLB miss, ICache miss and other events.",
@@ -10,7 +9,6 @@ }, { "BriefDescription": "Cycles code-fetch stalled due to an outstanding ITLB miss.", - "Counter": "0,1", "EventCode": "0x86", "EventName": "FETCH_STALL.ITLB_FILL_PENDING_CYCLES", "PublicDescription": "Counts cycles that fetch is stalled due to an outstanding ITLB miss. That is, the decoder queue is able to accept bytes, but the fetch unit is unable to provide bytes due to an ITLB miss. Note: this event is not the same as page walk cycles to retrieve an instruction translation.",
tools/perf/pmu-events/arch/x86/silvermont/pipeline.json +0 -35
@@ -1,7 +1,6 @@ [ { "BriefDescription": "Counts the number of branch instructions retired...", - "Counter": "0,1", "EventCode": "0xC4", "EventName": "BR_INST_RETIRED.ALL_BRANCHES", "PEBS": "1",
@@ -10,18 +9,15 @@ }, { "BriefDescription": "Counts the number of taken branch instructions retired", - "Counter": "0,1", "EventCode": "0xC4", "EventName": "BR_INST_RETIRED.ALL_TAKEN_BRANCHES", "PEBS": "2", - "PEBScounters": "0,1", "PublicDescription": "ALL_TAKEN_BRANCHES counts the number of all taken branch instructions retired. Branch prediction predicts the branch target and enables the processor to begin executing instructions long before the branch true execution path is known. All branches utilize the branch prediction unit (BPU) for prediction. This unit predicts the target address not only based on the EIP of the branch but also based on the execution path through which execution reached this EIP. The BPU can efficiently predict the following branch types: conditional branches, direct calls and jumps, indirect calls and jumps, returns.", "SampleAfterValue": "200003", "UMask": "0x80" }, { "BriefDescription": "Counts the number of near CALL branch instructions retired", - "Counter": "0,1", "EventCode": "0xC4", "EventName": "BR_INST_RETIRED.CALL", "PEBS": "1",
@@ -31,7 +27,6 @@ }, { "BriefDescription": "Counts the number of far branch instructions retired", - "Counter": "0,1", "EventCode": "0xC4", "EventName": "BR_INST_RETIRED.FAR_BRANCH", "PEBS": "1",
@@ -41,7 +36,6 @@ }, { "BriefDescription": "Counts the number of near indirect CALL branch instructions retired", - "Counter": "0,1", "EventCode": "0xC4", "EventName": "BR_INST_RETIRED.IND_CALL", "PEBS": "1",
@@ -51,7 +45,6 @@ }, { "BriefDescription": "Counts the number of JCC branch instructions retired", - "Counter": "0,1", "EventCode": "0xC4", "EventName": "BR_INST_RETIRED.JCC", "PEBS": "1",
@@ -61,7 +54,6 @@ }, { "BriefDescription": "Counts the number of near indirect JMP and near indirect CALL branch instructions retired", - "Counter": "0,1", "EventCode": "0xC4", "EventName": "BR_INST_RETIRED.NON_RETURN_IND", "PEBS": "1",
@@ -71,7 +63,6 @@ }, { "BriefDescription": "Counts the number of near relative CALL branch instructions retired", - "Counter": "0,1", "EventCode": "0xC4", "EventName": "BR_INST_RETIRED.REL_CALL", "PEBS": "1",
@@ -81,7 +72,6 @@ }, { "BriefDescription": "Counts the number of near RET branch instructions retired", - "Counter": "0,1", "EventCode": "0xC4", "EventName": "BR_INST_RETIRED.RETURN", "PEBS": "1",
@@ -91,7 +81,6 @@ }, { "BriefDescription": "Counts the number of taken JCC branch instructions retired", - "Counter": "0,1", "EventCode": "0xC4", "EventName": "BR_INST_RETIRED.TAKEN_JCC", "PEBS": "1",
@@ -101,7 +90,6 @@ }, { "BriefDescription": "Counts the number of mispredicted branch instructions retired", - "Counter": "0,1", "EventCode": "0xC5", "EventName": "BR_MISP_RETIRED.ALL_BRANCHES", "PEBS": "1",
@@ -110,7 +98,6 @@ }, { "BriefDescription": "Counts the number of mispredicted near indirect CALL branch instructions retired", - "Counter": "0,1", "EventCode": "0xC5", "EventName": "BR_MISP_RETIRED.IND_CALL", "PEBS": "1",
@@ -120,7 +107,6 @@ }, { "BriefDescription": "Counts the number of mispredicted JCC branch instructions retired", - "Counter": "0,1", "EventCode": "0xC5", "EventName": "BR_MISP_RETIRED.JCC", "PEBS": "1",
@@ -130,7 +116,6 @@ }, { "BriefDescription": "Counts the number of mispredicted near indirect JMP and near indirect CALL branch instructions retired", - "Counter": "0,1", "EventCode": "0xC5", "EventName": "BR_MISP_RETIRED.NON_RETURN_IND", "PEBS": "1",
@@ -140,7 +125,6 @@ }, { "BriefDescription": "Counts the number of mispredicted near RET branch instructions retired", - "Counter": "0,1", "EventCode": "0xC5", "EventName": "BR_MISP_RETIRED.RETURN", "PEBS": "1",
@@ -150,7 +134,6 @@ }, { "BriefDescription": "Counts the number of mispredicted taken JCC branch instructions retired", - "Counter": "0,1", "EventCode": "0xC5", "EventName": "BR_MISP_RETIRED.TAKEN_JCC", "PEBS": "1",
@@ -160,7 +143,6 @@ }, { "BriefDescription": "Fixed Counter: Counts the number of unhalted core clock cycles", - "Counter": "Fixed counter 2", "EventName": "CPU_CLK_UNHALTED.CORE", "PublicDescription": "Counts the number of core cycles while the core is not in a halt state. The core enters the halt state when it is running the HLT instruction. This event is a component in many key event ratios. The core frequency may change from time to time. For this reason this event may have a changing ratio with regards to time. In systems with a constant core frequency, this event can give you a measurement of the elapsed time while the core was not in halt state by dividing the event count by the core frequency. This event is architecturally defined and is a designated fixed counter. CPU_CLK_UNHALTED.CORE and CPU_CLK_UNHALTED.CORE_P use the core frequency which may change from time to time. CPU_CLK_UNHALTE.REF_TSC and CPU_CLK_UNHALTED.REF are not affected by core frequency changes but counts as if the core is running at the maximum frequency all the time. The fixed events are CPU_CLK_UNHALTED.CORE and CPU_CLK_UNHALTED.REF_TSC and the programmable events are CPU_CLK_UNHALTED.CORE_P and CPU_CLK_UNHALTED.REF.", "SampleAfterValue": "2000003",
@@ -168,7 +150,6 @@ }, { "BriefDescription": "Core cycles when core is not halted", - "Counter": "0,1", "EventCode": "0x3C", "EventName": "CPU_CLK_UNHALTED.CORE_P", "PublicDescription": "This event counts the number of core cycles while the core is not in a halt state. The core enters the halt state when it is running the HLT instruction. In mobile systems the core frequency may change from time to time. For this reason this event may have a changing ratio with regards to time.",
@@ -176,7 +157,6 @@ }, { "BriefDescription": "Reference cycles when core is not halted", - "Counter": "0,1", "EventCode": "0x3C", "EventName": "CPU_CLK_UNHALTED.REF", "PublicDescription": "This event counts the number of reference cycles that the core is not in a halt state. The core enters the halt state when it is running the HLT instruction. In mobile systems the core frequency may change from time. This event is not affected by core frequency changes but counts as if the core is running at the maximum frequency all the time.",
@@ -185,7 +165,6 @@ }, { "BriefDescription": "Fixed Counter: Counts the number of unhalted reference clock cycles", - "Counter": "Fixed counter 3", "EventName": "CPU_CLK_UNHALTED.REF_TSC", "PublicDescription": "Counts the number of reference cycles while the core is not in a halt state. The core enters the halt state when it is running the HLT instruction. This event is a component in many key event ratios. The core frequency may change from time. This event is not affected by core frequency changes but counts as if the core is running at the maximum frequency all the time. Divide this event count by core frequency to determine the elapsed time while the core was not in halt state. Divide this event count by core frequency to determine the elapsed time while the core was not in halt state. This event is architecturally defined and is a designated fixed counter. CPU_CLK_UNHALTED.CORE and CPU_CLK_UNHALTED.CORE_P use the core frequency which may change from time to time. CPU_CLK_UNHALTE.REF_TSC and CPU_CLK_UNHALTED.REF are not affected by core frequency changes but counts as if the core is running at the maximum frequency all the time. The fixed events are CPU_CLK_UNHALTED.CORE and CPU_CLK_UNHALTED.REF_TSC and the programmable events are CPU_CLK_UNHALTED.CORE_P and CPU_CLK_UNHALTED.REF.", "SampleAfterValue": "2000003",
@@ -193,7 +172,6 @@ }, { "BriefDescription": "Cycles the divider is busy. Does not imply a stall waiting for the divider.", - "Counter": "0,1", "EventCode": "0xCD", "EventName": "CYCLES_DIV_BUSY.ALL", "PublicDescription": "Cycles the divider is busy.This event counts the cycles when the divide unit is unable to accept a new divide UOP because it is busy processing a previously dispatched UOP. The cycles will be counted irrespective of whether or not another divide UOP is waiting to enter the divide unit (from the RS). This event might count cycles while a divide is in progress even if the RS is empty. The divide instruction is one of the longest latency instructions in the machine. Hence, it has a special event associated with it to help determine if divides are delaying the retirement of instructions.",
@@ -202,7 +180,6 @@ }, { "BriefDescription": "Fixed Counter: Counts the number of instructions retired", - "Counter": "Fixed counter 1", "EventName": "INST_RETIRED.ANY", "PublicDescription": "This event counts the number of instructions that retire. For instructions that consist of multiple micro-ops, this event counts exactly once, as the last micro-op of the instruction retires. The event continues counting while instructions retire, including during interrupt service routines caused by hardware interrupts, faults or traps. Background: Modern microprocessors employ extensive pipelining and speculative techniques. Since sometimes an instruction is started but never completed, the notion of \"retirement\" is introduced. A retired instruction is one that commits its states. Or stated differently, an instruction might be abandoned at some point. No instruction is truly finished until it retires. This counter measures the number of completed instructions. The fixed event is INST_RETIRED.ANY and the programmable event is INST_RETIRED.ANY_P.", "SampleAfterValue": "2000003",
@@ -210,7 +187,6 @@ }, { "BriefDescription": "Instructions retired", - "Counter": "0,1", "EventCode": "0xC0", "EventName": "INST_RETIRED.ANY_P", "PublicDescription": "This event counts the number of instructions that retire execution. For instructions that consist of multiple micro-ops, this event counts the retirement of the last micro-op of the instruction. The counter continues counting during hardware interrupts, traps, and inside interrupt handlers.",
@@ -218,7 +194,6 @@ }, { "BriefDescription": "Counts all machine clears", - "Counter": "0,1", "EventCode": "0xC3", "EventName": "MACHINE_CLEARS.ALL", "PublicDescription": "Machine clears happen when something happens in the machine that causes the hardware to need to take special care to get the right answer. When such a condition is signaled on an instruction, the front end of the machine is notified that it must restart, so no more instructions will be decoded from the current path. All instructions \"older\" than this one will be allowed to finish. This instruction and all \"younger\" instructions must be cleared, since they must not be allowed to complete. Essentially, the hardware waits until the problematic instruction is the oldest instruction in the machine. This means all older instructions are retired, and all pending stores (from older instructions) are completed. Then the new path of instructions from the front end are allowed to start into the machine. There are many conditions that might cause a machine clear (including the receipt of an interrupt, or a trap or a fault). All those conditions (including but not limited to MACHINE_CLEARS.MEMORY_ORDERING, MACHINE_CLEARS.SMC, and MACHINE_CLEARS.FP_ASSIST) are captured in the ANY event. In addition, some conditions can be specifically counted (i.e. SMC, MEMORY_ORDERING, FP_ASSIST). However, the sum of SMC, MEMORY_ORDERING, and FP_ASSIST machine clears will not necessarily equal the number of ANY.",
@@ -227,7 +202,6 @@ }, { "BriefDescription": "Self-Modifying Code detected", - "Counter": "0,1", "EventCode": "0xC3", "EventName": "MACHINE_CLEARS.SMC", "PublicDescription": "This event counts the number of times that a program writes to a code section. Self-modifying code causes a severe penalty in all Intel? architecture processors.",
@@ -236,7 +210,6 @@ }, { "BriefDescription": "Counts the number of cycles when no uops are allocated for any reason.", - "Counter": "0,1", "EventCode": "0xCA", "EventName": "NO_ALLOC_CYCLES.ALL", "PublicDescription": "The NO_ALLOC_CYCLES.ALL event counts the number of cycles when the front-end does not provide any instructions to be allocated for any reason. This event indicates the cycles where an allocation stalls occurs, and no UOPS are allocated in that cycle.",
@@ -245,7 +218,6 @@ }, { "BriefDescription": "Counts the number of cycles when no uops are allocated and the alloc pipe is stalled waiting for a mispredicted jump to retire. After the misprediction is detected, the front end will start immediately but the allocate pipe stalls until the mispredicted", - "Counter": "0,1", "EventCode": "0xCA", "EventName": "NO_ALLOC_CYCLES.MISPREDICTS", "PublicDescription": "Counts the number of cycles when no uops are allocated and the alloc pipe is stalled waiting for a mispredicted jump to retire. After the misprediction is detected, the front end will start immediately but the allocate pipe stalls until the mispredicted.",
@@ -254,7 +226,6 @@ }, { "BriefDescription": "Counts the number of cycles when no uops are allocated, the IQ is empty, and no other condition is blocking allocation.", - "Counter": "0,1", "EventCode": "0xCA", "EventName": "NO_ALLOC_CYCLES.NOT_DELIVERED", "PublicDescription": "The NO_ALLOC_CYCLES.NOT_DELIVERED event is used to measure front-end inefficiencies, i.e. when front-end of the machine is not delivering micro-ops to the back-end and the back-end is not stalled. This event can be used to identify if the machine is truly front-end bound. When this event occurs, it is an indication that the front-end of the machine is operating at less than its theoretical peak performance. Background: We can think of the processor pipeline as being divided into 2 broader parts: Front-end and Back-end. Front-end is responsible for fetching the instruction, decoding into micro-ops (uops) in machine understandable format and putting them into a micro-op queue to be consumed by back end. The back-end then takes these micro-ops, allocates the required resources. When all resources are ready, micro-ops are executed. If the back-end is not ready to accept micro-ops from the front-end, then we do not want to count these as front-end bottlenecks. However, whenever we have bottlenecks in the back-end, we will have allocation unit stalls and eventually forcing the front-end to wait until the back-end is ready to receive more UOPS. This event counts the cycles only when back-end is requesting more uops and front-end is not able to provide them. Some examples of conditions that cause front-end efficiencies are: Icache misses, ITLB misses, and decoder restrictions that limit the the front-end bandwidth.",
@@ -263,7 +234,6 @@ }, { "BriefDescription": "Counts the number of cycles when no uops are allocated and a RATstall is asserted.", - "Counter": "0,1", "EventCode": "0xCA", "EventName": "NO_ALLOC_CYCLES.RAT_STALL", "SampleAfterValue": "200003",
@@ -271,7 +241,6 @@ }, { "BriefDescription": "Counts the number of cycles when no uops are allocated and the ROB is full (less than 2 entries available)", - "Counter": "0,1", "EventCode": "0xCA", "EventName": "NO_ALLOC_CYCLES.ROB_FULL", "PublicDescription": "Counts the number of cycles when no uops are allocated and the ROB is full (less than 2 entries available).",
@@ -280,7 +249,6 @@ }, { "BriefDescription": "Counts the number of cycles the Alloc pipeline is stalled when any one of the RSs (IEC, FPC and MEC) is full. This event is a superset of all the individual RS stall event counts.", - "Counter": "0,1", "EventCode": "0xCB", "EventName": "RS_FULL_STALL.ALL", "SampleAfterValue": "200003",
@@ -288,7 +256,6 @@ }, { "BriefDescription": "Counts the number of cycles and allocation pipeline is stalled and is waiting for a free MEC reservation station entry. The cycles should be appropriately counted in case of the cracked ops e.g. In case of a cracked load-op, the load portion is sent to M", - "Counter": "0,1", "EventCode": "0xCB", "EventName": "RS_FULL_STALL.MEC", "PublicDescription": "Counts the number of cycles and allocation pipeline is stalled and is waiting for a free MEC reservation station entry. The cycles should be appropriately counted in case of the cracked ops e.g. In case of a cracked load-op, the load portion is sent to M.",
@@ -297,7 +264,6 @@ }, { "BriefDescription": "Micro-ops retired", - "Counter": "0,1", "EventCode": "0xC2", "EventName": "UOPS_RETIRED.ALL", "PublicDescription": "This event counts the number of micro-ops retired. The processor decodes complex macro instructions into a sequence of simpler micro-ops. Most instructions are composed of one or two micro-ops. Some instructions are decoded into longer sequences such as repeat instructions, floating point transcendental instructions, and assists. In some cases micro-op sequences are fused or whole instructions are fused into one micro-op. See other UOPS_RETIRED events for differentiating retired fused and non-fused micro-ops.",
@@ -306,7 +272,6 @@ }, { "BriefDescription": "MSROM micro-ops retired", - "Counter": "0,1", "EventCode": "0xC2", "EventName": "UOPS_RETIRED.MS", "PublicDescription": "This event counts the number of micro-ops retired that were supplied from MSROM.",
tools/perf/pmu-events/arch/x86/silvermont/virtual-memory.json +0 -7
@@ -1,7 +1,6 @@ [ { "BriefDescription": "Loads missed DTLB", - "Counter": "0,1", "EventCode": "0x04", "EventName": "MEM_UOPS_RETIRED.DTLB_MISS_LOADS", "PEBS": "1",
@@ -11,7 +10,6 @@ }, { "BriefDescription": "Total cycles for all the page walks. (I-side and D-side)", - "Counter": "0,1", "EventCode": "0x05", "EventName": "PAGE_WALKS.CYCLES", "PublicDescription": "This event counts every cycle when a data (D) page walk or instruction (I) page walk is in progress. Since a pagewalk implies a TLB miss, the approximate cost of a TLB miss can be determined from this event.",
@@ -20,7 +18,6 @@ }, { "BriefDescription": "Duration of D-side page-walks in core cycles", - "Counter": "0,1", "EventCode": "0x05", "EventName": "PAGE_WALKS.D_SIDE_CYCLES", "PublicDescription": "This event counts every cycle when a D-side (walks due to a load) page walk is in progress. Page walk duration divided by number of page walks is the average duration of page-walks.",
@@ -29,7 +26,6 @@ }, { "BriefDescription": "D-side page-walks", - "Counter": "0,1", "EdgeDetect": "1", "EventCode": "0x05", "EventName": "PAGE_WALKS.D_SIDE_WALKS",
@@ -39,7 +35,6 @@ }, { "BriefDescription": "Duration of I-side page-walks in core cycles", - "Counter": "0,1", "EventCode": "0x05", "EventName": "PAGE_WALKS.I_SIDE_CYCLES", "PublicDescription": "This event counts every cycle when a I-side (walks due to an instruction fetch) page walk is in progress. Page walk duration divided by number of page walks is the average duration of page-walks.",
@@ -48,7 +43,6 @@ }, { "BriefDescription": "I-side page-walks", - "Counter": "0,1", "EdgeDetect": "1", "EventCode": "0x05", "EventName": "PAGE_WALKS.I_SIDE_WALKS",
@@ -58,7 +52,6 @@ }, { "BriefDescription": "Total page walks that are completed (I-side and D-side)", - "Counter": "0,1", "EdgeDetect": "1", "EventCode": "0x05", "EventName": "PAGE_WALKS.WALKS",
Signature · 1 line
2.39.0.314.g84b9a713c41-goog
Ian Rogers
reviewerPATCH 26/32 perf vendor events intel: Refresh skylake metrics and events
In reply to Ian RogersUpdate the skylake metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses, use of exponents and removal of redundant operations like "* 1". The events are unchanged but unused json values are removed. The formatting changes increase consistency across the json files.
--- .../pmu-events/arch/x86/skylake/cache.json | 660 ------------------ .../arch/x86/skylake/floating-point.json | 14 - .../pmu-events/arch/x86/skylake/frontend.json | 109 --- .../pmu-events/arch/x86/skylake/memory.json | 358 ---------- .../pmu-events/arch/x86/skylake/other.json | 4 - .../pmu-events/arch/x86/skylake/pipeline.json | 192 ----- .../arch/x86/skylake/skl-metrics.json | 155 ++-- .../arch/x86/skylake/uncore-cache.json | 18 - .../arch/x86/skylake/uncore-other.json | 31 +- .../arch/x86/skylake/virtual-memory.json | 56 -- 10 files changed, 103 insertions(+), 1494 deletions(-)
tools/perf/pmu-events/arch/x86/skylake/cache.json +0 -660
@@ -1,8 +1,6 @@ [ { "BriefDescription": "L1D data line replacements", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x51", "EventName": "L1D.REPLACEMENT", "PublicDescription": "Counts L1D data line replacements including opportunistic replacements, and replacements that require stall-for-replace or block-for-replace.",
@@ -11,8 +9,6 @@ }, { "BriefDescription": "Number of times a request needed a FB entry but there was no entry available for it. That is the FB unavailability was dominant reason for blocking the request. A request includes cacheable/uncacheable demands that is load, store or SW prefetch.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.FB_FULL", "PublicDescription": "Number of times a request needed a FB (Fill Buffer) entry but there was no entry available for it. A request includes cacheable/uncacheable demands that are load, store or SW prefetch instructions.",
@@ -21,8 +17,6 @@ }, { "BriefDescription": "L1D miss outstandings duration in cycles", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.PENDING", "PublicDescription": "Counts duration of L1D miss outstanding, that is each cycle number of Fill Buffers (FB) outstanding required by Demand Reads. FB either is held by demand loads, or it is held by non-demand loads and gets hit at least once by demand. The valid outstanding interval is defined until the FB deallocation by one of the following ways: from FB allocation, if FB is allocated by demand from the demand Hit FB, if it is allocated by hardware or software prefetch.Note: In the L1D, a Demand Read contains cacheable or noncacheable demand loads, including ones causing cache-line splits and reads due to page walks resulted from any request type.",
@@ -31,8 +25,6 @@ }, { "BriefDescription": "Cycles with L1D load Misses outstanding.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.PENDING_CYCLES",
@@ -43,8 +35,6 @@ { "AnyThread": "1", "BriefDescription": "Cycles with L1D load Misses outstanding from any thread on physical core.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.PENDING_CYCLES_ANY",
@@ -53,8 +43,6 @@ }, { "BriefDescription": "L2 cache lines filling L2", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF1", "EventName": "L2_LINES_IN.ALL", "PublicDescription": "Counts the number of L2 cache lines filling the L2. Counting does not cover rejects.",
@@ -63,8 +51,6 @@ }, { "BriefDescription": "Counts the number of lines that are evicted by L2 cache when triggered by an L2 cache fill. Those lines are in Modified state. Modified lines are written back to L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.NON_SILENT", "SampleAfterValue": "200003",
@@ -72,8 +58,6 @@ }, { "BriefDescription": "Counts the number of lines that are silently dropped by L2 cache when triggered by an L2 cache fill. These lines are typically in Shared or Exclusive state. A non-threaded event.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.SILENT", "SampleAfterValue": "200003",
@@ -81,8 +65,6 @@ }, { "BriefDescription": "Counts the number of lines that have been hardware prefetched but not used and now evicted by L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.USELESS_HWPF", "SampleAfterValue": "200003",
@@ -90,8 +72,6 @@ }, { "BriefDescription": "This event is deprecated. Refer to new event L2_LINES_OUT.USELESS_HWPF", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.USELESS_PREF", "SampleAfterValue": "200003",
@@ -99,8 +79,6 @@ }, { "BriefDescription": "L2 code requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_CODE_RD", "PublicDescription": "Counts the total number of L2 code requests.",
@@ -109,8 +87,6 @@ }, { "BriefDescription": "Demand Data Read requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_DEMAND_DATA_RD", "PublicDescription": "Counts the number of demand Data Read requests (including requests from L1D hardware prefetchers). These loads may hit or miss L2 cache. Only non rejected loads are counted.",
@@ -119,8 +95,6 @@ }, { "BriefDescription": "Demand requests that miss L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_DEMAND_MISS", "PublicDescription": "Demand requests that miss L2 cache.",
@@ -129,8 +103,6 @@ }, { "BriefDescription": "Demand requests to L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_DEMAND_REFERENCES", "PublicDescription": "Demand requests to L2 cache.",
@@ -139,8 +111,6 @@ }, { "BriefDescription": "Requests from the L1/L2/L3 hardware prefetchers or Load software prefetches", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_PF", "PublicDescription": "Counts the total number of requests from the L2 hardware prefetchers.",
@@ -149,8 +119,6 @@ }, { "BriefDescription": "RFO requests to L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_RFO", "PublicDescription": "Counts the total number of RFO (read for ownership) requests to L2 cache. L2 RFO requests include both L1D demand RFO misses as well as L1D RFO prefetches.",
@@ -159,8 +127,6 @@ }, { "BriefDescription": "L2 cache hits when fetching instructions, code reads.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.CODE_RD_HIT", "PublicDescription": "Counts L2 cache hits when fetching instructions, code reads.",
@@ -169,8 +135,6 @@ }, { "BriefDescription": "L2 cache misses when fetching instructions", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.CODE_RD_MISS", "PublicDescription": "Counts L2 cache misses when fetching instructions.",
@@ -179,8 +143,6 @@ }, { "BriefDescription": "Demand Data Read requests that hit L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT", "PublicDescription": "Counts the number of demand Data Read requests, initiated by load instructions, that hit L2 cache",
@@ -189,8 +151,6 @@ }, { "BriefDescription": "Demand Data Read miss L2, no rejects", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.DEMAND_DATA_RD_MISS", "PublicDescription": "Counts the number of demand Data Read requests that miss L2 cache. Only not rejected loads are counted.",
@@ -199,8 +159,6 @@ }, { "BriefDescription": "All requests that miss L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.MISS", "PublicDescription": "All requests that miss L2 cache.",
@@ -209,8 +167,6 @@ }, { "BriefDescription": "Requests from the L1/L2/L3 hardware prefetchers or Load software prefetches that hit L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.PF_HIT", "PublicDescription": "Counts requests from the L1/L2/L3 hardware prefetchers or Load software prefetches that hit L2 cache.",
@@ -219,8 +175,6 @@ }, { "BriefDescription": "Requests from the L1/L2/L3 hardware prefetchers or Load software prefetches that miss L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.PF_MISS", "PublicDescription": "Counts requests from the L1/L2/L3 hardware prefetchers or Load software prefetches that miss L2 cache.",
@@ -229,8 +183,6 @@ }, { "BriefDescription": "All L2 requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.REFERENCES", "PublicDescription": "All L2 requests.",
@@ -239,8 +191,6 @@ }, { "BriefDescription": "RFO requests that hit L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.RFO_HIT", "PublicDescription": "Counts the RFO (Read-for-Ownership) requests that hit L2 cache.",
@@ -249,8 +199,6 @@ }, { "BriefDescription": "RFO requests that miss L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.RFO_MISS", "PublicDescription": "Counts the RFO (Read-for-Ownership) requests that miss L2 cache.",
@@ -259,8 +207,6 @@ }, { "BriefDescription": "L2 writebacks that access L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF0", "EventName": "L2_TRANS.L2_WB", "PublicDescription": "Counts L2 writebacks that access L2 cache.",
@@ -269,8 +215,6 @@ }, { "BriefDescription": "Core-originated cacheable demand requests missed L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "SKL057", "EventCode": "0x2E", "EventName": "LONGEST_LAT_CACHE.MISS",
@@ -280,8 +224,6 @@ }, { "BriefDescription": "Core-originated cacheable demand requests that refer to L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "SKL057", "EventCode": "0x2E", "EventName": "LONGEST_LAT_CACHE.REFERENCE",
@@ -291,8 +233,6 @@ }, { "BriefDescription": "All retired load instructions.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_INST_RETIRED.ALL_LOADS",
@@ -302,24 +242,18 @@ }, { "BriefDescription": "All retired store instructions.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_INST_RETIRED.ALL_STORES", - "L1_Hit_Indication": "1", "PEBS": "1", "SampleAfterValue": "2000003", "UMask": "0x82" }, { "BriefDescription": "All retired memory instructions.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_INST_RETIRED.ANY", - "L1_Hit_Indication": "1", "PEBS": "1", "PublicDescription": "Counts all retired memory instructions - loads and stores.", "SampleAfterValue": "2000003",
@@ -327,8 +261,6 @@ }, { "BriefDescription": "Retired load instructions with locked access.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_INST_RETIRED.LOCK_LOADS",
@@ -338,8 +270,6 @@ }, { "BriefDescription": "Retired load instructions that split across a cacheline boundary.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_INST_RETIRED.SPLIT_LOADS",
@@ -350,12 +280,9 @@ }, { "BriefDescription": "Retired store instructions that split across a cacheline boundary.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_INST_RETIRED.SPLIT_STORES", - "L1_Hit_Indication": "1", "PEBS": "1", "PublicDescription": "Counts retired store instructions that split across a cacheline boundary.", "SampleAfterValue": "100003",
@@ -363,8 +290,6 @@ }, { "BriefDescription": "Retired load instructions that miss the STLB.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_INST_RETIRED.STLB_MISS_LOADS",
@@ -375,12 +300,9 @@ }, { "BriefDescription": "Retired store instructions that miss the STLB.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_INST_RETIRED.STLB_MISS_STORES", - "L1_Hit_Indication": "1", "PEBS": "1", "PublicDescription": "Number of retired store instructions that (start a) miss in the 2nd-level TLB (STLB).", "SampleAfterValue": "100003",
@@ -388,8 +310,6 @@ }, { "BriefDescription": "Retired load instructions which data sources were L3 and cross-core snoop hits in on-pkg core cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD2", "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_HIT",
@@ -400,8 +320,6 @@ }, { "BriefDescription": "Retired load instructions which data sources were HitM responses from shared L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD2", "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_HITM",
@@ -412,8 +330,6 @@ }, { "BriefDescription": "Retired load instructions which data sources were L3 hit and cross-core snoop missed in on-pkg core cache.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD2", "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_MISS",
@@ -423,8 +339,6 @@ }, { "BriefDescription": "Retired load instructions which data sources were hits in L3 without snoops required", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD2", "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_NONE",
@@ -435,8 +349,6 @@ }, { "BriefDescription": "Retired instructions with at least 1 uncacheable load or lock.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD4", "EventName": "MEM_LOAD_MISC_RETIRED.UC",
@@ -446,8 +358,6 @@ }, { "BriefDescription": "Retired load instructions which data sources were load missed L1 but hit FB due to preceding miss to the same cache line with data not ready", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_RETIRED.FB_HIT",
@@ -458,8 +368,6 @@ }, { "BriefDescription": "Retired load instructions with L1 cache hits as data sources", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_RETIRED.L1_HIT",
@@ -470,8 +378,6 @@ }, { "BriefDescription": "Retired load instructions missed L1 cache as data sources", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_RETIRED.L1_MISS",
@@ -482,8 +388,6 @@ }, { "BriefDescription": "Retired load instructions with L2 cache hits as data sources", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_RETIRED.L2_HIT",
@@ -494,8 +398,6 @@ }, { "BriefDescription": "Retired load instructions missed L2 cache as data sources", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_RETIRED.L2_MISS",
@@ -506,8 +408,6 @@ }, { "BriefDescription": "Retired load instructions with L3 cache hits as data sources", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_RETIRED.L3_HIT",
@@ -518,8 +418,6 @@ }, { "BriefDescription": "Retired load instructions missed L3 cache as data sources", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_RETIRED.L3_MISS",
@@ -530,8 +428,6 @@ }, { "BriefDescription": "Demand and prefetch data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.ALL_DATA_RD", "PublicDescription": "Counts the demand and prefetch data reads. All Core Data Reads include cacheable 'Demands' and L2 prefetchers (not L3 prefetchers). Counting also covers reads due to page walks resulted from any request type.",
@@ -540,8 +436,6 @@ }, { "BriefDescription": "Any memory transaction that reached the SQ.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.ALL_REQUESTS", "PublicDescription": "Counts memory transactions reached the super queue including requests initiated by the core, all L3 prefetches, page walks, etc..",
@@ -550,8 +444,6 @@ }, { "BriefDescription": "Cacheable and noncachaeble code read requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.DEMAND_CODE_RD", "PublicDescription": "Counts both cacheable and non-cacheable code read requests.",
@@ -560,8 +452,6 @@ }, { "BriefDescription": "Demand Data Read requests sent to uncore", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.DEMAND_DATA_RD", "PublicDescription": "Counts the Demand Data Read requests sent to uncore. Use it in conjunction with OFFCORE_REQUESTS_OUTSTANDING to determine average latency in the uncore.",
@@ -570,8 +460,6 @@ }, { "BriefDescription": "Demand RFO requests including regular RFOs, locks, ItoM", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.DEMAND_RFO", "PublicDescription": "Counts the demand RFO (read for ownership) requests including regular RFOs, locks, ItoM.",
@@ -580,8 +468,6 @@ }, { "BriefDescription": "Offcore requests buffer cannot take more entries for this thread core.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB2", "EventName": "OFFCORE_REQUESTS_BUFFER.SQ_FULL", "PublicDescription": "Counts the number of cases when the offcore requests buffer cannot take more entries for the core. This can happen when the superqueue does not contain eligible entries, or when L1D writeback pending FIFO requests is full.Note: Writeback pending FIFO has six entries.",
@@ -590,8 +476,6 @@ }, { "BriefDescription": "Offcore outstanding cacheable Core Data Read transactions in SuperQueue (SQ), queue to uncore", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD", "PublicDescription": "Counts the number of offcore outstanding cacheable Core Data Read transactions in the super queue every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.",
@@ -600,8 +484,6 @@ }, { "BriefDescription": "Cycles when offcore outstanding cacheable Core Data Read transactions are present in SuperQueue (SQ), queue to uncore.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DATA_RD",
@@ -611,8 +493,6 @@ }, { "BriefDescription": "Cycles with offcore outstanding Code Reads transactions in the SuperQueue (SQ), queue to uncore.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_CODE_RD",
@@ -622,8 +502,6 @@ }, { "BriefDescription": "Cycles when offcore outstanding Demand Data Read transactions are present in SuperQueue (SQ), queue to uncore", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_DATA_RD",
@@ -633,8 +511,6 @@ }, { "BriefDescription": "Cycles with offcore outstanding demand rfo reads transactions in SuperQueue (SQ), queue to uncore.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_RFO",
@@ -644,8 +520,6 @@ }, { "BriefDescription": "Offcore outstanding Code Reads transactions in the SuperQueue (SQ), queue to uncore, every cycle.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_CODE_RD", "PublicDescription": "Counts the number of offcore outstanding Code Reads transactions in the super queue every cycle. The 'Offcore outstanding' state of the transaction lasts from the L2 miss until the sending transaction completion to requestor (SQ deallocation). See the corresponding Umask under OFFCORE_REQUESTS.",
@@ -654,8 +528,6 @@ }, { "BriefDescription": "Offcore outstanding Demand Data Read transactions in uncore queue.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD", "PublicDescription": "Counts the number of offcore outstanding Demand Data Read transactions in the super queue (SQ) every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor. See the corresponding Umask under OFFCORE_REQUESTS.Note: A prefetch promoted to Demand is counted from the promotion point.",
@@ -664,8 +536,6 @@ }, { "BriefDescription": "Cycles with at least 6 offcore outstanding Demand Data Read transactions in uncore queue.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "6", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD_GE_6",
@@ -674,8 +544,6 @@ }, { "BriefDescription": "Offcore outstanding demand rfo reads transactions in SuperQueue (SQ), queue to uncore, every cycle", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_RFO", "PublicDescription": "Counts the number of offcore outstanding RFO (store) transactions in the super queue (SQ) every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.",
@@ -684,8 +552,6 @@ }, { "BriefDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE", "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
@@ -694,2072 +560,1554 @@ }, { "BriefDescription": "Counts all demand code readshave any response type.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC01C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10001C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4001C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2001C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_NONE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x801C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1001C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SPL_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x401C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0080004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000080004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400080004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200080004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.SNOOP_NONE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80080004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100080004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.SPL_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40080004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0040004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000040004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400040004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200040004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.SNOOP_NONE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80040004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100040004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.SPL_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40040004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0100004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000100004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400100004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200100004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.SNOOP_NONE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80100004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100100004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.SPL_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40100004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L4_HIT_LOCAL_L4.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0400004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L4_HIT_LOCAL_L4.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000400004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L4_HIT_LOCAL_L4.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400400004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L4_HIT_LOCAL_L4.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200400004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L4_HIT_LOCAL_L4.SNOOP_NONE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80400004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L4_HIT_LOCAL_L4.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100400004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L4_HIT_LOCAL_L4.SPL_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40400004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0020004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000020004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400020004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200020004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_NONE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80020004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100020004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SPL_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40020004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data readshave any response type.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC01C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10001C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4001C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2001C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_NONE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x801C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1001C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SPL_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x401C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0080001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000080001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400080001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200080001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.SNOOP_NONE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80080001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100080001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.SPL_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40080001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0040001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000040001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400040001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200040001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.SNOOP_NONE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80040001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100040001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.SPL_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40040001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0100001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000100001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400100001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200100001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.SNOOP_NONE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80100001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100100001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.SPL_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40100001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0400001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000400001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400400001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200400001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.SNOOP_NONE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80400001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100400001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L4_HIT_LOCAL_L4.SPL_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40400001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0020001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000020001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400020001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200020001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_NONE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80020001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100020001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SPL_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40020001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)have any response type.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC01C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10001C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4001C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2001C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_NONE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x801C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1001C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SPL_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x401C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0080002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000080002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400080002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200080002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.SNOOP_NONE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80080002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100080002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.SPL_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40080002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0040002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000040002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400040002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200040002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.SNOOP_NONE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80040002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100040002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.SPL_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40040002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0100002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000100002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400100002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200100002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.SNOOP_NONE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80100002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100100002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.SPL_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40100002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L4_HIT_LOCAL_L4.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0400002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L4_HIT_LOCAL_L4.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000400002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L4_HIT_LOCAL_L4.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400400002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L4_HIT_LOCAL_L4.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200400002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L4_HIT_LOCAL_L4.SNOOP_NONE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80400002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L4_HIT_LOCAL_L4.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100400002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L4_HIT_LOCAL_L4.SPL_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40400002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0020002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000020002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400020002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200020002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.SNOOP_NONE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80020002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100020002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs)", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.SPL_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40020002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requestshave any response type.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x18000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC01C8000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10001C8000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4001C8000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2001C8000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_NONE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x801C8000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1001C8000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SPL_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x401C8000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0088000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000088000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400088000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200088000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.SNOOP_NONE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80088000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100088000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.SPL_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40088000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0048000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000048000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400048000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200048000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.SNOOP_NONE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80048000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100048000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.SPL_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40048000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0108000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000108000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400108000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200108000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.SNOOP_NONE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80108000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100108000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.SPL_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40108000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L4_HIT_LOCAL_L4.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0408000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L4_HIT_LOCAL_L4.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000408000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L4_HIT_LOCAL_L4.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400408000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L4_HIT_LOCAL_L4.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200408000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L4_HIT_LOCAL_L4.SNOOP_NONE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80408000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L4_HIT_LOCAL_L4.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100408000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.L4_HIT_LOCAL_L4.SPL_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40408000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3FC0028000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1000028000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x400028000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x200028000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_NONE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x80028000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x100028000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts any other requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SPL_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x40028000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Number of cache line split locks sent to uncore.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF4", "EventName": "SQ_MISC.SPLIT_LOCK", "PublicDescription": "Counts the number of cache line split locks sent to the uncore.",
@@ -2768,8 +2116,6 @@ }, { "BriefDescription": "Number of PREFETCHNTA instructions executed.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x32", "EventName": "SW_PREFETCH_ACCESS.NTA", "SampleAfterValue": "2000003",
@@ -2777,8 +2123,6 @@ }, { "BriefDescription": "Number of PREFETCHW instructions executed.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x32", "EventName": "SW_PREFETCH_ACCESS.PREFETCHW", "SampleAfterValue": "2000003",
@@ -2786,8 +2130,6 @@ }, { "BriefDescription": "Number of PREFETCHT0 instructions executed.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x32", "EventName": "SW_PREFETCH_ACCESS.T0", "SampleAfterValue": "2000003",
@@ -2795,8 +2137,6 @@ }, { "BriefDescription": "Number of PREFETCHT1 or PREFETCHT2 instructions executed.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x32", "EventName": "SW_PREFETCH_ACCESS.T1_T2", "SampleAfterValue": "2000003",
tools/perf/pmu-events/arch/x86/skylake/floating-point.json +0 -14
@@ -1,8 +1,6 @@ [ { "BriefDescription": "Counts once for most SIMD 128-bit packed computational double precision floating-point instructions retired. Counts twice for DPP and FM(N)ADD/SUB instructions retired.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xC7", "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE", "PublicDescription": "Counts once for most SIMD 128-bit packed computational double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 2 computation operations, one for each element. Applies to packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
@@ -11,8 +9,6 @@ }, { "BriefDescription": "Counts once for most SIMD 128-bit packed computational single precision floating-point instruction retired. Counts twice for DPP and FM(N)ADD/SUB instructions retired.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xC7", "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE", "PublicDescription": "Counts once for most SIMD 128-bit packed computational single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
@@ -21,8 +17,6 @@ }, { "BriefDescription": "Counts once for most SIMD 256-bit packed double computational precision floating-point instructions retired. Counts twice for DPP and FM(N)ADD/SUB instructions retired.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xC7", "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE", "PublicDescription": "Counts once for most SIMD 256-bit packed double computational precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
@@ -31,8 +25,6 @@ }, { "BriefDescription": "Counts once for most SIMD 256-bit packed single computational precision floating-point instructions retired. Counts twice for DPP and FM(N)ADD/SUB instructions retired.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xC7", "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE", "PublicDescription": "Counts once for most SIMD 256-bit packed single computational precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
@@ -41,8 +33,6 @@ }, { "BriefDescription": "Counts once for most SIMD scalar computational double precision floating-point instructions retired. Counts twice for DPP and FM(N)ADD/SUB instructions retired.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xC7", "EventName": "FP_ARITH_INST_RETIRED.SCALAR_DOUBLE", "PublicDescription": "Counts once for most SIMD scalar computational double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SIMD scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
@@ -51,8 +41,6 @@ }, { "BriefDescription": "Counts once for most SIMD scalar computational single precision floating-point instructions retired. Counts twice for DPP and FM(N)ADD/SUB instructions retired.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xC7", "EventName": "FP_ARITH_INST_RETIRED.SCALAR_SINGLE", "PublicDescription": "Counts once for most SIMD scalar computational single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SIMD scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
@@ -61,8 +49,6 @@ }, { "BriefDescription": "Cycles with any input/output SSE or FP assist", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0xCA", "EventName": "FP_ASSIST.ANY",
tools/perf/pmu-events/arch/x86/skylake/frontend.json +0 -109
304 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/skylake/memory.json +0 -358
358 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/skylake/other.json +0 -4
Lines of this file are not shown. View the raw message.
tools/perf/pmu-events/arch/x86/skylake/pipeline.json +0 -192
192 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/skylake/skl-metrics.json +90 -65
155 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/skylake/uncore-cache.json +0 -18
Lines of this file are not shown. View the raw message.
tools/perf/pmu-events/arch/x86/skylake/uncore-other.json +13 -18
Lines of this file are not shown. View the raw message.
tools/perf/pmu-events/arch/x86/skylake/virtual-memory.json +0 -56
56 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.39.0.314.g84b9a713c41-goog
Part of the diff is not shown here. View the raw message.
Ian Rogers
reviewerPATCH 27/32 perf vendor events intel: Refresh skylakex metrics and events
In reply to Ian RogersUpdate the skylakex metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses, use of exponents and removal of redundant operations like "* 1". The order of metrics varies as TMA metrics are first converted and then removed if perfmon versions are found. The events are updated with fixes to uncore events and improved descriptions. uncore-other.json changes due to events now being sorted. The formatting changes increase consistency across the json files.
--- .../pmu-events/arch/x86/skylakex/cache.json | 368 - .../arch/x86/skylakex/floating-point.json | 18 - .../arch/x86/skylakex/frontend.json | 109 - .../pmu-events/arch/x86/skylakex/memory.json | 310 - .../pmu-events/arch/x86/skylakex/other.json | 30 - .../arch/x86/skylakex/pipeline.json | 194 - .../arch/x86/skylakex/skx-metrics.json | 2134 +- .../arch/x86/skylakex/uncore-memory.json | 2303 +- .../arch/x86/skylakex/uncore-other.json | 29356 +++++++++------- .../arch/x86/skylakex/uncore-power.json | 45 +- .../arch/x86/skylakex/virtual-memory.json | 56 - 11 files changed, 18426 insertions(+), 16497 deletions(-)
tools/perf/pmu-events/arch/x86/skylakex/cache.json +0 -368
@@ -1,8 +1,6 @@ [ { "BriefDescription": "L1D data line replacements", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x51", "EventName": "L1D.REPLACEMENT", "PublicDescription": "Counts L1D data line replacements including opportunistic replacements, and replacements that require stall-for-replace or block-for-replace.",
@@ -11,8 +9,6 @@ }, { "BriefDescription": "Number of times a request needed a FB entry but there was no entry available for it. That is the FB unavailability was dominant reason for blocking the request. A request includes cacheable/uncacheable demands that is load, store or SW prefetch.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.FB_FULL", "PublicDescription": "Number of times a request needed a FB (Fill Buffer) entry but there was no entry available for it. A request includes cacheable/uncacheable demands that are load, store or SW prefetch instructions.",
@@ -21,8 +17,6 @@ }, { "BriefDescription": "L1D miss outstandings duration in cycles", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.PENDING", "PublicDescription": "Counts duration of L1D miss outstanding, that is each cycle number of Fill Buffers (FB) outstanding required by Demand Reads. FB either is held by demand loads, or it is held by non-demand loads and gets hit at least once by demand. The valid outstanding interval is defined until the FB deallocation by one of the following ways: from FB allocation, if FB is allocated by demand from the demand Hit FB, if it is allocated by hardware or software prefetch.Note: In the L1D, a Demand Read contains cacheable or noncacheable demand loads, including ones causing cache-line splits and reads due to page walks resulted from any request type.",
@@ -31,8 +25,6 @@ }, { "BriefDescription": "Cycles with L1D load Misses outstanding.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.PENDING_CYCLES",
@@ -43,8 +35,6 @@ { "AnyThread": "1", "BriefDescription": "Cycles with L1D load Misses outstanding from any thread on physical core.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x48", "EventName": "L1D_PEND_MISS.PENDING_CYCLES_ANY",
@@ -53,8 +43,6 @@ }, { "BriefDescription": "L2 cache lines filling L2", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF1", "EventName": "L2_LINES_IN.ALL", "PublicDescription": "Counts the number of L2 cache lines filling the L2. Counting does not cover rejects.",
@@ -63,8 +51,6 @@ }, { "BriefDescription": "Counts the number of lines that are evicted by L2 cache when triggered by an L2 cache fill. Those lines can be either in modified state or clean state. Modified lines may either be written back to L3 or directly written to memory and not allocated in L3. Clean lines may either be allocated in L3 or dropped", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.NON_SILENT", "PublicDescription": "Counts the number of lines that are evicted by L2 cache when triggered by an L2 cache fill. Those lines can be either in modified state or clean state. Modified lines may either be written back to L3 or directly written to memory and not allocated in L3. Clean lines may either be allocated in L3 or dropped.",
@@ -73,8 +59,6 @@ }, { "BriefDescription": "Counts the number of lines that are silently dropped by L2 cache when triggered by an L2 cache fill. These lines are typically in Shared state. A non-threaded event.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.SILENT", "SampleAfterValue": "200003",
@@ -82,8 +66,6 @@ }, { "BriefDescription": "Counts the number of lines that have been hardware prefetched but not used and now evicted by L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.USELESS_HWPF", "SampleAfterValue": "200003",
@@ -91,8 +73,6 @@ }, { "BriefDescription": "This event is deprecated. Refer to new event L2_LINES_OUT.USELESS_HWPF", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Deprecated": "1", "EventCode": "0xF2", "EventName": "L2_LINES_OUT.USELESS_PREF",
@@ -101,8 +81,6 @@ }, { "BriefDescription": "L2 code requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_CODE_RD", "PublicDescription": "Counts the total number of L2 code requests.",
@@ -111,8 +89,6 @@ }, { "BriefDescription": "Demand Data Read requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_DEMAND_DATA_RD", "PublicDescription": "Counts the number of demand Data Read requests (including requests from L1D hardware prefetchers). These loads may hit or miss L2 cache. Only non rejected loads are counted.",
@@ -121,8 +97,6 @@ }, { "BriefDescription": "Demand requests that miss L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_DEMAND_MISS", "PublicDescription": "Demand requests that miss L2 cache.",
@@ -131,8 +105,6 @@ }, { "BriefDescription": "Demand requests to L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_DEMAND_REFERENCES", "PublicDescription": "Demand requests to L2 cache.",
@@ -141,8 +113,6 @@ }, { "BriefDescription": "Requests from the L1/L2/L3 hardware prefetchers or Load software prefetches", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_PF", "PublicDescription": "Counts the total number of requests from the L2 hardware prefetchers.",
@@ -151,8 +121,6 @@ }, { "BriefDescription": "RFO requests to L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.ALL_RFO", "PublicDescription": "Counts the total number of RFO (read for ownership) requests to L2 cache. L2 RFO requests include both L1D demand RFO misses as well as L1D RFO prefetches.",
@@ -161,8 +129,6 @@ }, { "BriefDescription": "L2 cache hits when fetching instructions, code reads.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.CODE_RD_HIT", "PublicDescription": "Counts L2 cache hits when fetching instructions, code reads.",
@@ -171,8 +137,6 @@ }, { "BriefDescription": "L2 cache misses when fetching instructions", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.CODE_RD_MISS", "PublicDescription": "Counts L2 cache misses when fetching instructions.",
@@ -181,8 +145,6 @@ }, { "BriefDescription": "Demand Data Read requests that hit L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT", "PublicDescription": "Counts the number of demand Data Read requests, initiated by load instructions, that hit L2 cache",
@@ -191,8 +153,6 @@ }, { "BriefDescription": "Demand Data Read miss L2, no rejects", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.DEMAND_DATA_RD_MISS", "PublicDescription": "Counts the number of demand Data Read requests that miss L2 cache. Only not rejected loads are counted.",
@@ -201,8 +161,6 @@ }, { "BriefDescription": "All requests that miss L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.MISS", "PublicDescription": "All requests that miss L2 cache.",
@@ -211,8 +169,6 @@ }, { "BriefDescription": "Requests from the L1/L2/L3 hardware prefetchers or Load software prefetches that hit L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.PF_HIT", "PublicDescription": "Counts requests from the L1/L2/L3 hardware prefetchers or Load software prefetches that hit L2 cache.",
@@ -221,8 +177,6 @@ }, { "BriefDescription": "Requests from the L1/L2/L3 hardware prefetchers or Load software prefetches that miss L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.PF_MISS", "PublicDescription": "Counts requests from the L1/L2/L3 hardware prefetchers or Load software prefetches that miss L2 cache.",
@@ -231,8 +185,6 @@ }, { "BriefDescription": "All L2 requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.REFERENCES", "PublicDescription": "All L2 requests.",
@@ -241,8 +193,6 @@ }, { "BriefDescription": "RFO requests that hit L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.RFO_HIT", "PublicDescription": "Counts the RFO (Read-for-Ownership) requests that hit L2 cache.",
@@ -251,8 +201,6 @@ }, { "BriefDescription": "RFO requests that miss L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x24", "EventName": "L2_RQSTS.RFO_MISS", "PublicDescription": "Counts the RFO (Read-for-Ownership) requests that miss L2 cache.",
@@ -261,8 +209,6 @@ }, { "BriefDescription": "L2 writebacks that access L2 cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF0", "EventName": "L2_TRANS.L2_WB", "PublicDescription": "Counts L2 writebacks that access L2 cache.",
@@ -271,8 +217,6 @@ }, { "BriefDescription": "Core-originated cacheable demand requests missed L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "SKL057", "EventCode": "0x2E", "EventName": "LONGEST_LAT_CACHE.MISS",
@@ -282,8 +226,6 @@ }, { "BriefDescription": "Core-originated cacheable demand requests that refer to L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "Errata": "SKL057", "EventCode": "0x2E", "EventName": "LONGEST_LAT_CACHE.REFERENCE",
@@ -293,8 +235,6 @@ }, { "BriefDescription": "All retired load instructions.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_INST_RETIRED.ALL_LOADS",
@@ -304,24 +244,18 @@ }, { "BriefDescription": "All retired store instructions.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_INST_RETIRED.ALL_STORES", - "L1_Hit_Indication": "1", "PEBS": "1", "SampleAfterValue": "2000003", "UMask": "0x82" }, { "BriefDescription": "All retired memory instructions.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_INST_RETIRED.ANY", - "L1_Hit_Indication": "1", "PEBS": "1", "PublicDescription": "Counts all retired memory instructions - loads and stores.", "SampleAfterValue": "2000003",
@@ -329,8 +263,6 @@ }, { "BriefDescription": "Retired load instructions with locked access.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_INST_RETIRED.LOCK_LOADS",
@@ -340,8 +272,6 @@ }, { "BriefDescription": "Retired load instructions that split across a cacheline boundary.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_INST_RETIRED.SPLIT_LOADS",
@@ -352,12 +282,9 @@ }, { "BriefDescription": "Retired store instructions that split across a cacheline boundary.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_INST_RETIRED.SPLIT_STORES", - "L1_Hit_Indication": "1", "PEBS": "1", "PublicDescription": "Counts retired store instructions that split across a cacheline boundary.", "SampleAfterValue": "100003",
@@ -365,8 +292,6 @@ }, { "BriefDescription": "Retired load instructions that miss the STLB.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_INST_RETIRED.STLB_MISS_LOADS",
@@ -377,12 +302,9 @@ }, { "BriefDescription": "Retired store instructions that miss the STLB.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD0", "EventName": "MEM_INST_RETIRED.STLB_MISS_STORES", - "L1_Hit_Indication": "1", "PEBS": "1", "PublicDescription": "Number of retired store instructions that (start a) miss in the 2nd-level TLB (STLB).", "SampleAfterValue": "100003",
@@ -390,8 +312,6 @@ }, { "BriefDescription": "Retired load instructions which data sources were L3 and cross-core snoop hits in on-pkg core cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD2", "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_HIT",
@@ -402,8 +322,6 @@ }, { "BriefDescription": "Retired load instructions which data sources were HitM responses from shared L3", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD2", "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_HITM",
@@ -414,8 +332,6 @@ }, { "BriefDescription": "Retired load instructions which data sources were L3 hit and cross-core snoop missed in on-pkg core cache.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD2", "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_MISS",
@@ -425,8 +341,6 @@ }, { "BriefDescription": "Retired load instructions which data sources were hits in L3 without snoops required", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD2", "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_NONE",
@@ -437,8 +351,6 @@ }, { "BriefDescription": "Retired load instructions which data sources missed L3 but serviced from local dram", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD3", "EventName": "MEM_LOAD_L3_MISS_RETIRED.LOCAL_DRAM",
@@ -449,8 +361,6 @@ }, { "BriefDescription": "Retired load instructions which data sources missed L3 but serviced from remote dram", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD3", "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_DRAM",
@@ -460,8 +370,6 @@ }, { "BriefDescription": "Retired load instructions whose data sources was forwarded from a remote cache", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD3", "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_FWD",
@@ -472,8 +380,6 @@ }, { "BriefDescription": "Retired load instructions whose data sources was remote HITM", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD3", "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_HITM",
@@ -484,8 +390,6 @@ }, { "BriefDescription": "Retired instructions with at least 1 uncacheable load or lock.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD4", "EventName": "MEM_LOAD_MISC_RETIRED.UC",
@@ -495,8 +399,6 @@ }, { "BriefDescription": "Retired load instructions which data sources were load missed L1 but hit FB due to preceding miss to the same cache line with data not ready", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_RETIRED.FB_HIT",
@@ -507,8 +409,6 @@ }, { "BriefDescription": "Retired load instructions with L1 cache hits as data sources", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_RETIRED.L1_HIT",
@@ -519,8 +419,6 @@ }, { "BriefDescription": "Retired load instructions missed L1 cache as data sources", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_RETIRED.L1_MISS",
@@ -531,8 +429,6 @@ }, { "BriefDescription": "Retired load instructions with L2 cache hits as data sources", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_RETIRED.L2_HIT",
@@ -543,8 +439,6 @@ }, { "BriefDescription": "Retired load instructions missed L2 cache as data sources", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_RETIRED.L2_MISS",
@@ -555,8 +449,6 @@ }, { "BriefDescription": "Retired load instructions with L3 cache hits as data sources", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_RETIRED.L3_HIT",
@@ -567,8 +459,6 @@ }, { "BriefDescription": "Retired load instructions missed L3 cache as data sources", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "Data_LA": "1", "EventCode": "0xD1", "EventName": "MEM_LOAD_RETIRED.L3_MISS",
@@ -579,8 +469,6 @@ }, { "BriefDescription": "Demand and prefetch data reads", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.ALL_DATA_RD", "PublicDescription": "Counts the demand and prefetch data reads. All Core Data Reads include cacheable 'Demands' and L2 prefetchers (not L3 prefetchers). Counting also covers reads due to page walks resulted from any request type.",
@@ -589,8 +477,6 @@ }, { "BriefDescription": "Any memory transaction that reached the SQ.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.ALL_REQUESTS", "PublicDescription": "Counts memory transactions reached the super queue including requests initiated by the core, all L3 prefetches, page walks, etc..",
@@ -599,8 +485,6 @@ }, { "BriefDescription": "Cacheable and noncachaeble code read requests", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.DEMAND_CODE_RD", "PublicDescription": "Counts both cacheable and non-cacheable code read requests.",
@@ -609,8 +493,6 @@ }, { "BriefDescription": "Demand Data Read requests sent to uncore", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.DEMAND_DATA_RD", "PublicDescription": "Counts the Demand Data Read requests sent to uncore. Use it in conjunction with OFFCORE_REQUESTS_OUTSTANDING to determine average latency in the uncore.",
@@ -619,8 +501,6 @@ }, { "BriefDescription": "Demand RFO requests including regular RFOs, locks, ItoM", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB0", "EventName": "OFFCORE_REQUESTS.DEMAND_RFO", "PublicDescription": "Counts the demand RFO (read for ownership) requests including regular RFOs, locks, ItoM.",
@@ -629,8 +509,6 @@ }, { "BriefDescription": "Offcore requests buffer cannot take more entries for this thread core.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xB2", "EventName": "OFFCORE_REQUESTS_BUFFER.SQ_FULL", "PublicDescription": "Counts the number of cases when the offcore requests buffer cannot take more entries for the core. This can happen when the superqueue does not contain eligible entries, or when L1D writeback pending FIFO requests is full.Note: Writeback pending FIFO has six entries.",
@@ -639,8 +517,6 @@ }, { "BriefDescription": "Offcore outstanding cacheable Core Data Read transactions in SuperQueue (SQ), queue to uncore", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD", "PublicDescription": "Counts the number of offcore outstanding cacheable Core Data Read transactions in the super queue every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.",
@@ -649,8 +525,6 @@ }, { "BriefDescription": "Cycles when offcore outstanding cacheable Core Data Read transactions are present in SuperQueue (SQ), queue to uncore.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DATA_RD",
@@ -660,8 +534,6 @@ }, { "BriefDescription": "Cycles with offcore outstanding Code Reads transactions in the SuperQueue (SQ), queue to uncore.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_CODE_RD",
@@ -671,8 +543,6 @@ }, { "BriefDescription": "Cycles when offcore outstanding Demand Data Read transactions are present in SuperQueue (SQ), queue to uncore", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_DATA_RD",
@@ -682,8 +552,6 @@ }, { "BriefDescription": "Cycles with offcore outstanding demand rfo reads transactions in SuperQueue (SQ), queue to uncore.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_RFO",
@@ -693,8 +561,6 @@ }, { "BriefDescription": "Offcore outstanding Code Reads transactions in the SuperQueue (SQ), queue to uncore, every cycle.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_CODE_RD", "PublicDescription": "Counts the number of offcore outstanding Code Reads transactions in the super queue every cycle. The 'Offcore outstanding' state of the transaction lasts from the L2 miss until the sending transaction completion to requestor (SQ deallocation). See the corresponding Umask under OFFCORE_REQUESTS.",
@@ -703,8 +569,6 @@ }, { "BriefDescription": "Offcore outstanding Demand Data Read transactions in uncore queue.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD", "PublicDescription": "Counts the number of offcore outstanding Demand Data Read transactions in the super queue (SQ) every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor. See the corresponding Umask under OFFCORE_REQUESTS.Note: A prefetch promoted to Demand is counted from the promotion point.",
@@ -713,8 +577,6 @@ }, { "BriefDescription": "Cycles with at least 6 offcore outstanding Demand Data Read transactions in uncore queue.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "6", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD_GE_6",
@@ -723,8 +585,6 @@ }, { "BriefDescription": "Offcore outstanding demand rfo reads transactions in SuperQueue (SQ), queue to uncore, every cycle", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x60", "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_RFO", "PublicDescription": "Counts the number of offcore outstanding RFO (store) transactions in the super queue (SQ) every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.",
@@ -733,8 +593,6 @@ }, { "BriefDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE", "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
@@ -743,872 +601,654 @@ }, { "BriefDescription": "Counts all demand & prefetch data reads that have any response type.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10491", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0491", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0491", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0491", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0491", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0491", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch data reads that have any response type.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10490", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch data reads that hit in the L3.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0490", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0490", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0490", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0490", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0490", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch RFOs that have any response type.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10120", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch RFOs that hit in the L3.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0120", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0120", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0120", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0120", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_HIT_WITH_FWD", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0120", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch RFOs that have any response type.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_RFO.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10122", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0122", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0122", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0122", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0122", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_HIT_WITH_FWD", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0122", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads that have any response type.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads that hit in the L3.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that have any response type.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that hit in the L3.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs) that have any response type.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HIT_WITH_FWD", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that have any response type.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10400", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0400", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0400", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0400", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0400", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.SNOOP_HIT_WITH_FWD", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0400", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to L2) data reads that have any response type.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that have any response type.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_HIT_WITH_FWD", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that have any response type.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10080", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0080", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0080", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0080", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0080", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0080", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that have any response type.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10100", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.ANY_SNOOP", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3F803C0100", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.HITM_OTHER_CORE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0100", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0100", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.NO_SNOOP_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0100", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_HIT_WITH_FWD", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0100", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Number of cache line split locks sent to uncore.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xF4", "EventName": "SQ_MISC.SPLIT_LOCK", "PublicDescription": "Counts the number of cache line split locks sent to the uncore.",
@@ -1617,8 +1257,6 @@ }, { "BriefDescription": "Number of PREFETCHNTA instructions executed.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x32", "EventName": "SW_PREFETCH_ACCESS.NTA", "SampleAfterValue": "2000003",
@@ -1626,8 +1264,6 @@ }, { "BriefDescription": "Number of PREFETCHW instructions executed.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x32", "EventName": "SW_PREFETCH_ACCESS.PREFETCHW", "SampleAfterValue": "2000003",
@@ -1635,8 +1271,6 @@ }, { "BriefDescription": "Number of PREFETCHT0 instructions executed.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x32", "EventName": "SW_PREFETCH_ACCESS.T0", "SampleAfterValue": "2000003",
@@ -1644,8 +1278,6 @@ }, { "BriefDescription": "Number of PREFETCHT1 or PREFETCHT2 instructions executed.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0x32", "EventName": "SW_PREFETCH_ACCESS.T1_T2", "SampleAfterValue": "2000003",
tools/perf/pmu-events/arch/x86/skylakex/floating-point.json +0 -18
@@ -1,8 +1,6 @@ [ { "BriefDescription": "Counts once for most SIMD 128-bit packed computational double precision floating-point instructions retired. Counts twice for DPP and FM(N)ADD/SUB instructions retired.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xC7", "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE", "PublicDescription": "Counts once for most SIMD 128-bit packed computational double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 2 computation operations, one for each element. Applies to packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
@@ -11,8 +9,6 @@ }, { "BriefDescription": "Counts once for most SIMD 128-bit packed computational single precision floating-point instruction retired. Counts twice for DPP and FM(N)ADD/SUB instructions retired.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xC7", "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE", "PublicDescription": "Counts once for most SIMD 128-bit packed computational single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
@@ -21,8 +17,6 @@ }, { "BriefDescription": "Counts once for most SIMD 256-bit packed double computational precision floating-point instructions retired. Counts twice for DPP and FM(N)ADD/SUB instructions retired.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xC7", "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE", "PublicDescription": "Counts once for most SIMD 256-bit packed double computational precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
@@ -31,8 +25,6 @@ }, { "BriefDescription": "Counts once for most SIMD 256-bit packed single computational precision floating-point instructions retired. Counts twice for DPP and FM(N)ADD/SUB instructions retired.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xC7", "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE", "PublicDescription": "Counts once for most SIMD 256-bit packed single computational precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
@@ -41,8 +33,6 @@ }, { "BriefDescription": "Counts number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xC7", "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE", "PublicDescription": "Number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
@@ -51,8 +41,6 @@ }, { "BriefDescription": "Counts number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 16 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xC7", "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE", "PublicDescription": "Number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 16 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
@@ -61,8 +49,6 @@ }, { "BriefDescription": "Counts once for most SIMD scalar computational double precision floating-point instructions retired. Counts twice for DPP and FM(N)ADD/SUB instructions retired.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xC7", "EventName": "FP_ARITH_INST_RETIRED.SCALAR_DOUBLE", "PublicDescription": "Counts once for most SIMD scalar computational double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SIMD scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
@@ -71,8 +57,6 @@ }, { "BriefDescription": "Counts once for most SIMD scalar computational single precision floating-point instructions retired. Counts twice for DPP and FM(N)ADD/SUB instructions retired.", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "EventCode": "0xC7", "EventName": "FP_ARITH_INST_RETIRED.SCALAR_SINGLE", "PublicDescription": "Counts once for most SIMD scalar computational single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SIMD scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
@@ -81,8 +65,6 @@ }, { "BriefDescription": "Cycles with any input/output SSE or FP assist", - "Counter": "0,1,2,3", - "CounterHTOff": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0xCA", "EventName": "FP_ASSIST.ANY",
tools/perf/pmu-events/arch/x86/skylakex/frontend.json +0 -109
455 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/skylakex/memory.json +0 -310
1,001 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/skylakex/other.json +0 -30
Lines of this file are not shown. View the raw message.
tools/perf/pmu-events/arch/x86/skylakex/pipeline.json +0 -194
194 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/skylakex/skx-metrics.json +1059 -1075
2,134 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/skylakex/uncore-memory.json +975 -1328
2,303 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/skylakex/uncore-other.json +16372 -12984
29,356 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/skylakex/uncore-power.json +20 -25
45 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/skylakex/virtual-memory.json +0 -56
56 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.39.0.314.g84b9a713c41-goog
Part of the diff is not shown here. View the raw message.
Ian Rogers
reviewerPATCH 28/32 perf vendor events intel: Refresh snowridgex events
In reply to Ian RogersUpdate the snowridgex events using the new tooling from:
https://github.com/intel/perfmon
The events are unchanged but unused json values are removed and descriptions improved. This increases consistency across the json files.
--- .../pmu-events/arch/x86/snowridgex/cache.json | 252 - .../arch/x86/snowridgex/floating-point.json | 11 - .../arch/x86/snowridgex/frontend.json | 36 - .../arch/x86/snowridgex/memory.json | 84 - .../pmu-events/arch/x86/snowridgex/other.json | 143 - .../arch/x86/snowridgex/pipeline.json | 213 - .../arch/x86/snowridgex/uncore-memory.json | 624 +- .../arch/x86/snowridgex/uncore-other.json | 26334 +++++++--------- .../arch/x86/snowridgex/uncore-power.json | 114 +- .../arch/x86/snowridgex/virtual-memory.json | 117 - 10 files changed, 11934 insertions(+), 15994 deletions(-)
tools/perf/pmu-events/arch/x86/snowridgex/cache.json +0 -252
@@ -1,1137 +1,885 @@ [ { "BriefDescription": "Counts the number of core requests (demand and L1 prefetchers) rejected by the L2 queue (L2Q) due to a full condition.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x31", "EventName": "CORE_REJECT_L2Q.ANY", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of (demand and L1 prefetchers) core requests rejected by the L2 queue (L2Q) due to a full or nearly full condition, which likely indicates back pressure from L2Q. It also counts requests that would have gone directly to the External Queue (XQ), but are rejected due to a full or nearly full condition, indicating back pressure from the IDI link. The L2Q may also reject transactions from a core to ensure fairness between cores, or to delay a cores dirty eviction when the address conflicts incoming external snoops. (Note that L2 prefetcher requests that are dropped are not counted by this event). Counts on a per core basis.", "SampleAfterValue": "200003" }, { "BriefDescription": "Counts the number of L1D cacheline (dirty) evictions caused by load misses, stores, and prefetches.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x51", "EventName": "DL1.DIRTY_EVICTION", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of L1D cacheline (dirty) evictions caused by load misses, stores, and prefetches. Does not count evictions or dirty writebacks caused by snoops. Does not count a replacement unless a (dirty) line was written back.", "SampleAfterValue": "200003", "UMask": "0x1" }, { "BriefDescription": "Counts the number of demand and prefetch transactions that the External Queue (XQ) rejects due to a full or near full condition.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x30", "EventName": "L2_REJECT_XQ.ANY", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of demand and prefetch transactions that the External Queue (XQ) rejects due to a full or near full condition which likely indicates back pressure from the IDI link. The XQ may reject transactions from the L2Q (non-cacheable requests), BBL (L2 misses) and WOB (L2 write-back victims).", "SampleAfterValue": "200003" }, { "BriefDescription": "Counts the total number of L2 Cache accesses. Counts on a per core basis.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_REQUEST.ALL", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the total number of L2 Cache Accesses, includes hits, misses, rejects front door requests for CRd/DRd/RFO/ItoM/L2 Prefetches only. Counts on a per core basis.", "SampleAfterValue": "200003" }, { "BriefDescription": "Counts the number of L2 Cache accesses that resulted in a hit. Counts on a per core basis.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_REQUEST.HIT", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of L2 Cache accesses that resulted in a hit from a front door request only (does not include rejects or recycles), Counts on a per core basis.", "SampleAfterValue": "200003", "UMask": "0x2" }, { "BriefDescription": "Counts the number of L2 Cache accesses that resulted in a miss. Counts on a per core basis.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_REQUEST.MISS", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of L2 Cache accesses that resulted in a miss from a front door request only (does not include rejects or recycles). Counts on a per core basis.", "SampleAfterValue": "200003", "UMask": "0x1" }, { "BriefDescription": "Counts the number of L2 Cache accesses that miss the L2 and get rejected. Counts on a per core basis.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x24", "EventName": "L2_REQUEST.REJECTS", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of L2 Cache accesses that miss the L2 and get BBL reject short and long rejects (includes those counted in L2_reject_XQ.any). Counts on a per core basis.", "SampleAfterValue": "200003", "UMask": "0x4" }, { "BriefDescription": "Counts the number of cacheable memory requests that miss in the LLC. Counts on a per core basis.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x2e", "EventName": "LONGEST_LAT_CACHE.MISS", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of cacheable memory requests that miss in the Last Level Cache (LLC). Requests include demand loads, reads for ownership (RFO), instruction fetches and L1 HW prefetches. If the platform has an L3 cache, the LLC is the L3 cache, otherwise it is the L2 cache. Counts on a per core basis.", "SampleAfterValue": "200003", "UMask": "0x41" }, { "BriefDescription": "Counts the number of cacheable memory requests that access the LLC. Counts on a per core basis.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x2e", "EventName": "LONGEST_LAT_CACHE.REFERENCE", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of cacheable memory requests that access the Last Level Cache (LLC). Requests include demand loads, reads for ownership (RFO), instruction fetches and L1 HW prefetches. If the platform has an L3 cache, the LLC is the L3 cache, otherwise it is the L2 cache. Counts on a per core basis.", "SampleAfterValue": "200003", "UMask": "0x4f" }, { "BriefDescription": "Counts the number of cycles the core is stalled due to an instruction cache or TLB miss which hit in the L2, LLC, DRAM or MMIO (Non-DRAM).", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x34", "EventName": "MEM_BOUND_STALLS.IFETCH", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x38" }, { "BriefDescription": "Counts the number of cycles the core is stalled due to an instruction cache or TLB miss which hit in DRAM or MMIO (Non-DRAM).", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x34", "EventName": "MEM_BOUND_STALLS.IFETCH_DRAM_HIT", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of cycles the core is stalled due to an instruction cache or translation lookaside buffer (TLB) miss which hit in DRAM or MMIO (non-DRAM).", "SampleAfterValue": "200003", "UMask": "0x20" }, { "BriefDescription": "Counts the number of cycles the core is stalled due to an instruction cache or TLB miss which hit in the L2 cache.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x34", "EventName": "MEM_BOUND_STALLS.IFETCH_L2_HIT", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of cycles the core is stalled due to an instruction cache or Translation Lookaside Buffer (TLB) miss which hit in the L2 cache.", "SampleAfterValue": "200003", "UMask": "0x8" }, { "BriefDescription": "Counts the number of cycles the core is stalled due to an instruction cache or TLB miss which hit in the LLC or other core with HITE/F/M.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x34", "EventName": "MEM_BOUND_STALLS.IFETCH_LLC_HIT", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of cycles the core is stalled due to an instruction cache or Translation Lookaside Buffer (TLB) miss which hit in the Last Level Cache (LLC) or other core with HITE/F/M.", "SampleAfterValue": "200003", "UMask": "0x10" }, { "BriefDescription": "Counts the number of cycles the core is stalled due to a demand load miss which hit in the L2, LLC, DRAM or MMIO (Non-DRAM).", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x34", "EventName": "MEM_BOUND_STALLS.LOAD", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x7" }, { "BriefDescription": "Counts the number of cycles the core is stalled due to a demand load miss which hit in DRAM or MMIO (Non-DRAM).", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x34", "EventName": "MEM_BOUND_STALLS.LOAD_DRAM_HIT", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x4" }, { "BriefDescription": "Counts the number of cycles the core is stalled due to a demand load which hit in the L2 cache.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x34", "EventName": "MEM_BOUND_STALLS.LOAD_L2_HIT", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x1" }, { "BriefDescription": "Counts the number of cycles the core is stalled due to a demand load which hit in the LLC or other core with HITE/F/M.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x34", "EventName": "MEM_BOUND_STALLS.LOAD_LLC_HIT", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of cycles the core is stalled due to a demand load which hit in the Last Level Cache (LLC) or other core with HITE/F/M.", "SampleAfterValue": "200003", "UMask": "0x2" }, { "BriefDescription": "Counts the number of cycles the core is stalled due to a store buffer being full.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x34", "EventName": "MEM_BOUND_STALLS.STORE_BUFFER_FULL", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x40" }, { "BriefDescription": "Counts the number of load uops retired that hit in DRAM.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_UOPS_RETIRED.DRAM_HIT", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x80" }, { "BriefDescription": "Counts the number of load uops retired that hit in the L3 cache, in which a snoop was required and modified data was forwarded from another core or module.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_UOPS_RETIRED.HITM", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x20" }, { "BriefDescription": "Counts the number of load uops retired that hit in the L1 data cache.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_UOPS_RETIRED.L1_HIT", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x1" }, { "BriefDescription": "Counts the number of load uops retired that miss in the L1 data cache.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_UOPS_RETIRED.L1_MISS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x8" }, { "BriefDescription": "Counts the number of load uops retired that hit in the L2 cache.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_UOPS_RETIRED.L2_HIT", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x2" }, { "BriefDescription": "Counts the number of load uops retired that miss in the L2 cache.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_UOPS_RETIRED.L2_MISS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x10" }, { "BriefDescription": "Counts the number of load uops retired that hit in the L3 cache.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd1", "EventName": "MEM_LOAD_UOPS_RETIRED.L3_HIT", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x4" }, { "BriefDescription": "Counts the number of memory uops retired.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_UOPS_RETIRED.ALL", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of memory uops retired. A single uop that performs both a load AND a store will be counted as 1, not 2 (e.g. ADD [mem], CONST)", "SampleAfterValue": "200003", "UMask": "0x83" }, { "BriefDescription": "Counts the number of load uops retired.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_UOPS_RETIRED.ALL_LOADS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the total number of load uops retired.", "SampleAfterValue": "200003", "UMask": "0x81" }, { "BriefDescription": "Counts the number of store uops retired.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_UOPS_RETIRED.ALL_STORES", "PEBS": "1", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the total number of store uops retired.", "SampleAfterValue": "200003", "UMask": "0x82" }, { "BriefDescription": "Counts the number of load uops retired that performed one or more locks.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_UOPS_RETIRED.LOCK_LOADS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x21" }, { "BriefDescription": "Counts the number of memory uops retired that were splits.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_UOPS_RETIRED.SPLIT", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x43" }, { "BriefDescription": "Counts the number of retired split load uops.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_UOPS_RETIRED.SPLIT_LOADS", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x41" }, { "BriefDescription": "Counts the number of retired split store uops.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "Data_LA": "1", "EventCode": "0xd0", "EventName": "MEM_UOPS_RETIRED.SPLIT_STORES", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x42" }, { "BriefDescription": "Counts all code reads that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.ALL_CODE_RD.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1F803C0044", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all code reads that were supplied by the L3 cache where a snoop was sent, the snoop hit, and modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.ALL_CODE_RD.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0044", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all code reads that were supplied by the L3 cache where a snoop was sent, the snoop hit, but no data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.ALL_CODE_RD.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0044", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all code reads that were supplied by the L3 cache where a snoop was sent, the snoop hit, and non-modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.ALL_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0044", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all code reads that were supplied by the L3 cache where a snoop was sent but the snoop missed.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.ALL_CODE_RD.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C0044", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all code reads that were supplied by the L3 cache where no snoop was needed to satisfy the request.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.ALL_CODE_RD.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0044", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts modified writebacks from L1 cache and L2 cache that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.COREWB_M.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x3001F803C0000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_CODE_RD.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1F803C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that were supplied by the L3 cache where a snoop was sent, the snoop hit, and modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that were supplied by the L3 cache where a snoop was sent, the snoop hit, but no data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that were supplied by the L3 cache where a snoop was sent, the snoop hit, and non-modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that were supplied by the L3 cache where a snoop was sent but the snoop missed.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand instruction fetches and L1 instruction cache prefetches that were supplied by the L3 cache where no snoop was needed to satisfy the request.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0004", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts cacheable demand data reads, L1 data cache hardware prefetches and software prefetches (except PREFETCHW) that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_DATA_AND_L1PF_RD.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1F803C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts cacheable demand data reads, L1 data cache hardware prefetches and software prefetches (except PREFETCHW) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_DATA_AND_L1PF_RD.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts cacheable demand data reads, L1 data cache hardware prefetches and software prefetches (except PREFETCHW) that were supplied by the L3 cache where a snoop was sent, the snoop hit, but no data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_DATA_AND_L1PF_RD.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts cacheable demand data reads, L1 data cache hardware prefetches and software prefetches (except PREFETCHW) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and non-modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_DATA_AND_L1PF_RD.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts cacheable demand data reads, L1 data cache hardware prefetches and software prefetches (except PREFETCHW) that were supplied by the L3 cache where a snoop was sent but the snoop missed.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_DATA_AND_L1PF_RD.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts cacheable demand data reads, L1 data cache hardware prefetches and software prefetches (except PREFETCHW) that were supplied by the L3 cache where no snoop was needed to satisfy the request.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_DATA_AND_L1PF_RD.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_AND_L1PF_RD.L3_HIT", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_DATA_RD.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1F803C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_AND_L1PF_RD.L3_HIT.SNOOP_HITM", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_AND_L1PF_RD.L3_HIT.SNOOP_HIT_NO_FWD", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_AND_L1PF_RD.L3_HIT.SNOOP_HIT_WITH_FWD", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_AND_L1PF_RD.L3_HIT.SNOOP_MISS", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_AND_L1PF_RD.L3_HIT.SNOOP_NOT_NEEDED", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0001", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) and software prefetches for exclusive ownership (PREFETCHW) that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_RFO.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1F803C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) and software prefetches for exclusive ownership (PREFETCHW) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) and software prefetches for exclusive ownership (PREFETCHW) that were supplied by the L3 cache where a snoop was sent, the snoop hit, but no data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) and software prefetches for exclusive ownership (PREFETCHW) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and non-modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) and software prefetches for exclusive ownership (PREFETCHW) that were supplied by the L3 cache where a snoop was sent but the snoop missed.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts demand reads for ownership (RFO) and software prefetches for exclusive ownership (PREFETCHW) that were supplied by the L3 cache where no snoop was needed to satisfy the request.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0002", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts streaming stores which modify a full 64 byte cacheline that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.FULL_STREAMING_WR.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x801F803C0000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L1 data cache hardware prefetches and software prefetches (except PREFETCHW and PFRFO) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L1D_AND_SWPF.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0400", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch code reads (written to the L2 cache only) that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_CODE_RD.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1F803C0040", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch code reads (written to the L2 cache only) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_CODE_RD.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0040", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch code reads (written to the L2 cache only) that were supplied by the L3 cache where a snoop was sent, the snoop hit, but no data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_CODE_RD.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0040", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch code reads (written to the L2 cache only) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and non-modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0040", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch code reads (written to the L2 cache only) that were supplied by the L3 cache where a snoop was sent but the snoop missed.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_CODE_RD.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C0040", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch code reads (written to the L2 cache only) that were supplied by the L3 cache where no snoop was needed to satisfy the request.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_CODE_RD.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0040", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch data reads (written to the L2 cache only) that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_DATA_RD.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1F803C0010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch data reads (written to the L2 cache only) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_DATA_RD.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch data reads (written to the L2 cache only) that were supplied by the L3 cache where a snoop was sent, the snoop hit, but no data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_DATA_RD.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch data reads (written to the L2 cache only) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and non-modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch data reads (written to the L2 cache only) that were supplied by the L3 cache where a snoop was sent but the snoop missed.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_DATA_RD.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C0010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch data reads (written to the L2 cache only) that were supplied by the L3 cache where no snoop was needed to satisfy the request.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_DATA_RD.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0010", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch RFOs (written to the L2 cache only) that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_RFO.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1F803C0020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch RFOs (written to the L2 cache only) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_RFO.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch RFOs (written to the L2 cache only) that were supplied by the L3 cache where a snoop was sent, the snoop hit, but no data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_RFO.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch RFOs (written to the L2 cache only) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and non-modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_RFO.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch RFOs (written to the L2 cache only) that were supplied by the L3 cache where a snoop was sent but the snoop missed.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_RFO.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C0020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts L2 cache hardware prefetch RFOs (written to the L2 cache only) that were supplied by the L3 cache where no snoop was needed to satisfy the request.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.HWPF_L2_RFO.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0020", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts modified writebacks from L1 cache that miss the L2 cache that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.L1WB_M.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1001F803C0000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts modified writeBacks from L2 cache that miss the L3 cache that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.L2WB_M.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2001F803C0000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts streaming stores which modify only part of a 64 byte cacheline that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.PARTIAL_STREAMING_WR.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x401F803C0000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.READS_TO_CORE.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1F803C0477", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.READS_TO_CORE.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10003C0477", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by the L3 cache where a snoop was sent, the snoop hit, but no data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.READS_TO_CORE.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x4003C0477", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by the L3 cache where a snoop was sent, the snoop hit, and non-modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.READS_TO_CORE.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x8003C0477", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by the L3 cache where a snoop was sent but the snoop missed.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.READS_TO_CORE.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x2003C0477", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts all data read, code read and RFO requests including demands and prefetches to the core caches (L1 or L2) that were supplied by the L3 cache where no snoop was needed to satisfy the request.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.READS_TO_CORE.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1003C0477", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts streaming stores that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.STREAMING_WR.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1F803C0800", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts uncached memory reads that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.UC_RD.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x101F803C0000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts uncached memory reads that were supplied by the L3 cache where a snoop was sent, the snoop hit, and modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.UC_RD.L3_HIT.SNOOP_HITM", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1010003C0000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts uncached memory reads that were supplied by the L3 cache where a snoop was sent, the snoop hit, but no data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.UC_RD.L3_HIT.SNOOP_HIT_NO_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1004003C0000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts uncached memory reads that were supplied by the L3 cache where a snoop was sent, the snoop hit, and non-modified data was forwarded.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.UC_RD.L3_HIT.SNOOP_HIT_WITH_FWD", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1008003C0000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts uncached memory reads that were supplied by the L3 cache where a snoop was sent but the snoop missed.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.UC_RD.L3_HIT.SNOOP_MISS", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1002003C0000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts uncached memory reads that were supplied by the L3 cache where no snoop was needed to satisfy the request.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.UC_RD.L3_HIT.SNOOP_NOT_NEEDED", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x1001003C0000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts uncached memory writes that were supplied by the L3 cache.", - "Counter": "0,1,2,3", "EventCode": "0XB7", "EventName": "OCR.UC_WR.L3_HIT", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x201F803C0000", - "Offcore": "1", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts the number of issue slots every cycle that were not delivered by the frontend due to instruction cache misses.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x71", "EventName": "TOPDOWN_FE_BOUND.ICACHE", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "1000003", "UMask": "0x20" }
tools/perf/pmu-events/arch/x86/snowridgex/floating-point.json +0 -11
@@ -1,36 +1,25 @@ [ { "BriefDescription": "Counts the number of cycles the floating point divider is busy.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xcd", "EventName": "CYCLES_DIV_BUSY.FPDIV", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of cycles the floating point divider is busy. Does not imply a stall waiting for the divider.", "SampleAfterValue": "200003", "UMask": "0x2" }, { "BriefDescription": "Counts the number of floating point operations retired that required microcode assist.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xc3", "EventName": "MACHINE_CLEARS.FP_ASSIST", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of floating point operations retired that required microcode assist, which is not a reflection of the number of FP operations, instructions or uops.", "SampleAfterValue": "20003", "UMask": "0x4" }, { "BriefDescription": "Counts the number of floating point divide uops retired (x87 and SSE, including x87 sqrt).", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xc2", "EventName": "UOPS_RETIRED.FPDIV", "PEBS": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "2000003", "UMask": "0x8" }
tools/perf/pmu-events/arch/x86/snowridgex/frontend.json +0 -36
@@ -1,103 +1,67 @@ [ { "BriefDescription": "Counts the total number of BACLEARS due to all branch types including conditional and unconditional jumps, returns, and indirect branches.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xe6", "EventName": "BACLEARS.ANY", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the total number of BACLEARS, which occur when the Branch Target Buffer (BTB) prediction or lack thereof, was corrected by a later branch predictor in the frontend. Includes BACLEARS due to all branch types including conditional and unconditional jumps, returns, and indirect branches.", "SampleAfterValue": "200003", "UMask": "0x1" }, { "BriefDescription": "Counts the number of BACLEARS due to a conditional jump.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xe6", "EventName": "BACLEARS.COND", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x10" }, { "BriefDescription": "Counts the number of BACLEARS due to an indirect branch.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xe6", "EventName": "BACLEARS.INDIRECT", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x2" }, { "BriefDescription": "Counts the number of BACLEARS due to a return branch.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xe6", "EventName": "BACLEARS.RETURN", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x8" }, { "BriefDescription": "Counts the number of BACLEARS due to a direct, unconditional jump.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xe6", "EventName": "BACLEARS.UNCOND", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x4" }, { "BriefDescription": "Counts the number of times a decode restriction reduces the decode throughput due to wrong instruction length prediction.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xe9", "EventName": "DECODE_RESTRICTION.PREDECODE_WRONG", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "200003", "UMask": "0x1" }, { "BriefDescription": "Counts the number of requests to the instruction cache for one or more bytes of a cache line.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x80", "EventName": "ICACHE.ACCESSES", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the total number of requests to the instruction cache. The event only counts new cache line accesses, so that multiple back to back fetches to the exact same cache line or byte chunk count as one. Specifically, the event counts when accesses from sequential code crosses the cache line boundary, or when a branch target is moved to a new line or to a non-sequential byte chunk of the same line.", "SampleAfterValue": "200003", "UMask": "0x3" }, { "BriefDescription": "Counts the number of instruction cache hits.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x80", "EventName": "ICACHE.HIT", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of requests that hit in the instruction cache. The event only counts new cache line accesses, so that multiple back to back fetches to the exact same cache line and byte chunk count as one. Specifically, the event counts when accesses from sequential code crosses the cache line boundary, or when a branch target is moved to a new line or to a non-sequential byte chunk of the same line.", "SampleAfterValue": "200003", "UMask": "0x1" }, { "BriefDescription": "Counts the number of instruction cache misses.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x80", "EventName": "ICACHE.MISSES", - "PDIR_COUNTER": "NA", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts the number of missed requests to the instruction cache. The event only counts new cache line accesses, so that multiple back to back fetches to the exact same cache line and byte chunk count as one. Specifically, the event counts when accesses from sequential code crosses the cache line boundary, or when a branch target is moved to a new line or to a non-sequential byte chunk of the same line.", "SampleAfterValue": "200003", "UMask": "0x2"
tools/perf/pmu-events/arch/x86/snowridgex/memory.json +0 -84
441 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/snowridgex/other.json +0 -143
674 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/snowridgex/pipeline.json +0 -213
609 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/snowridgex/uncore-memory.json +275 -349
624 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/snowridgex/uncore-other.json +11618 -14716
26,334 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/snowridgex/uncore-power.json +41 -73
114 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/snowridgex/virtual-memory.json +0 -117
117 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.39.0.314.g84b9a713c41-goog
Part of the diff is not shown here. View the raw message.
Ian Rogers
reviewerPATCH 29/32 perf vendor events intel: Refresh tigerlake metrics and events
In reply to Ian RogersUpdate the tigerlake metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses, use of exponents and removal of redundant operations like "* 1". The events are updated to version 1.08 and unused json values are removed. The formatting changes increase consistency across the json files.
--- tools/perf/pmu-events/arch/x86/mapfile.csv | 2 +- .../pmu-events/arch/x86/tigerlake/cache.json | 210 +------------ .../arch/x86/tigerlake/floating-point.json | 27 -- .../arch/x86/tigerlake/frontend.json | 125 -------- .../pmu-events/arch/x86/tigerlake/memory.json | 77 ----- .../pmu-events/arch/x86/tigerlake/other.json | 13 - .../arch/x86/tigerlake/pipeline.json | 287 +----------------- .../arch/x86/tigerlake/tgl-metrics.json | 141 +++++---- .../arch/x86/tigerlake/uncore-other.json | 96 ++++-- .../arch/x86/tigerlake/virtual-memory.json | 60 ---- 10 files changed, 157 insertions(+), 881 deletions(-)
tools/perf/pmu-events/arch/x86/mapfile.csv +1 -1
@@ -26,7 +26,7 @@ GenuineIntel-6-(37|4A|4C|4D|5A),v14,silvermont,core GenuineIntel-6-(4E|5E|8E|9E|A5|A6),v53,skylake,core GenuineIntel-6-55-[01234],v1.28,skylakex,core GenuineIntel-6-86,v1.20,snowridgex,core -GenuineIntel-6-8[CD],v1.07,tigerlake,core +GenuineIntel-6-8[CD],v1.08,tigerlake,core GenuineIntel-6-2C,v2,westmereep-dp,core GenuineIntel-6-25,v3,westmereep-sp,core GenuineIntel-6-2F,v3,westmereex,core
tools/perf/pmu-events/arch/x86/tigerlake/cache.json +7 -203
754 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/tigerlake/floating-point.json +0 -27
@@ -1,99 +1,72 @@ [ { "BriefDescription": "Counts all microcode FP assists.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc1", "EventName": "ASSISTS.FP", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Counts all microcode Floating Point assists.", "SampleAfterValue": "100003", "UMask": "0x2" }, { "BriefDescription": "Counts number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 2 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc7", "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 2 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", "SampleAfterValue": "100003", "UMask": "0x4" }, { "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc7", "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", "SampleAfterValue": "100003", "UMask": "0x8" }, { "BriefDescription": "Counts number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc7", "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", "SampleAfterValue": "100003", "UMask": "0x10" }, { "BriefDescription": "Counts number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc7", "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", "SampleAfterValue": "100003", "UMask": "0x20" }, { "BriefDescription": "Counts number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc7", "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", "SampleAfterValue": "100003", "UMask": "0x40" }, { "BriefDescription": "Counts number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 16 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc7", "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 16 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", "SampleAfterValue": "100003", "UMask": "0x80" }, { "BriefDescription": "Counts number of SSE/AVX computational scalar double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc7", "EventName": "FP_ARITH_INST_RETIRED.SCALAR_DOUBLE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Number of SSE/AVX computational scalar double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", "SampleAfterValue": "100003", "UMask": "0x1" }, { "BriefDescription": "Counts number of SSE/AVX computational scalar single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc7", "EventName": "FP_ARITH_INST_RETIRED.SCALAR_SINGLE", - "PEBScounters": "0,1,2,3,4,5,6,7", "PublicDescription": "Number of SSE/AVX computational scalar single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.", "SampleAfterValue": "100003", "UMask": "0x2"
tools/perf/pmu-events/arch/x86/tigerlake/frontend.json +0 -125
476 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/tigerlake/memory.json +0 -77
293 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/tigerlake/other.json +0 -13
@@ -1,47 +1,34 @@ [ { "BriefDescription": "Core cycles where the core was running in a manner where Turbo may be clipped to the Non-AVX turbo schedule.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x28", "EventName": "CORE_POWER.LVL0_TURBO_LICENSE", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts Core cycles where the core was running with power-delivery for baseline license level 0. This includes non-AVX codes, SSE, AVX 128-bit, and low-current AVX 256-bit codes.", "SampleAfterValue": "200003", "UMask": "0x7" }, { "BriefDescription": "Core cycles where the core was running in a manner where Turbo may be clipped to the AVX2 turbo schedule.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x28", "EventName": "CORE_POWER.LVL1_TURBO_LICENSE", - "PEBScounters": "0,1,2,3", "PublicDescription": "Counts Core cycles where the core was running with power-delivery for license level 1. This includes high current AVX 256-bit instructions as well as low current AVX 512-bit instructions.", "SampleAfterValue": "200003", "UMask": "0x18" }, { "BriefDescription": "Core cycles where the core was running in a manner where Turbo may be clipped to the AVX512 turbo schedule.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0x28", "EventName": "CORE_POWER.LVL2_TURBO_LICENSE", - "PEBScounters": "0,1,2,3", "PublicDescription": "Core cycles where the core was running with power-delivery for license level 2 (introduced in Skylake Server microarchtecture). This includes high current AVX 512-bit instructions.", "SampleAfterValue": "200003", "UMask": "0x20" }, { "BriefDescription": "Counts streaming stores that have any type of response.", - "CollectPEBSRecord": "2", - "Counter": "0,1,2,3", "EventCode": "0xB7, 0xBB", "EventName": "OCR.STREAMING_WR.ANY_RESPONSE", "MSRIndex": "0x1a6,0x1a7", "MSRValue": "0x10800", - "Offcore": "1", - "PEBScounters": "0,1,2,3", "SampleAfterValue": "100003", "UMask": "0x1" }
tools/perf/pmu-events/arch/x86/tigerlake/pipeline.json +4 -283
1,070 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/tigerlake/tgl-metrics.json +75 -66
253 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/tigerlake/uncore-other.json +70 -26
96 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/tigerlake/virtual-memory.json +0 -60
60 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.39.0.314.g84b9a713c41-goog
Part of the diff is not shown here. View the raw message.
Ian Rogers
reviewerPATCH 30/32 perf vendor events intel: Refresh westmereep-dp events
In reply to Ian RogersUpdate the westmereep-dp events using the new tooling from:
https://github.com/intel/perfmon
The events are unchanged, unused json values are removed and the version number bumped to v3 to match the perfmon mapfile.csv. This increases consistency across the json files.
--- tools/perf/pmu-events/arch/x86/mapfile.csv | 2 +- .../arch/x86/westmereep-dp/cache.json | 445 ------------------ .../x86/westmereep-dp/floating-point.json | 28 -- .../arch/x86/westmereep-dp/frontend.json | 3 - .../arch/x86/westmereep-dp/memory.json | 137 ------ .../arch/x86/westmereep-dp/other.json | 22 - .../arch/x86/westmereep-dp/pipeline.json | 129 +---- .../x86/westmereep-dp/virtual-memory.json | 21 - 8 files changed, 6 insertions(+), 781 deletions(-)
tools/perf/pmu-events/arch/x86/mapfile.csv +1 -1
@@ -27,7 +27,7 @@ GenuineIntel-6-(4E|5E|8E|9E|A5|A6),v53,skylake,core GenuineIntel-6-55-[01234],v1.28,skylakex,core GenuineIntel-6-86,v1.20,snowridgex,core GenuineIntel-6-8[CD],v1.08,tigerlake,core -GenuineIntel-6-2C,v2,westmereep-dp,core +GenuineIntel-6-2C,v3,westmereep-dp,core GenuineIntel-6-25,v3,westmereep-sp,core GenuineIntel-6-2F,v3,westmereex,core AuthenticAMD-23-([12][0-9A-F]|[0-9A-F]),v2,amdzen1,core
tools/perf/pmu-events/arch/x86/westmereep-dp/cache.json +0 -445
2,602 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/westmereep-dp/floating-point.json +0 -28
@@ -1,7 +1,6 @@ [ { "BriefDescription": "X87 Floating point assists (Precise Event)", - "Counter": "0,1,2,3", "EventCode": "0xF7", "EventName": "FP_ASSIST.ALL", "PEBS": "1",
@@ -10,7 +9,6 @@ }, { "BriefDescription": "X87 Floating poiint assists for invalid input value (Precise Event)", - "Counter": "0,1,2,3", "EventCode": "0xF7", "EventName": "FP_ASSIST.INPUT", "PEBS": "1",
@@ -19,7 +17,6 @@ }, { "BriefDescription": "X87 Floating point assists for invalid output value (Precise Event)", - "Counter": "0,1,2,3", "EventCode": "0xF7", "EventName": "FP_ASSIST.OUTPUT", "PEBS": "1",
@@ -28,7 +25,6 @@ }, { "BriefDescription": "MMX Uops", - "Counter": "0,1,2,3", "EventCode": "0x10", "EventName": "FP_COMP_OPS_EXE.MMX", "SampleAfterValue": "2000000",
@@ -36,7 +32,6 @@ }, { "BriefDescription": "SSE2 integer Uops", - "Counter": "0,1,2,3", "EventCode": "0x10", "EventName": "FP_COMP_OPS_EXE.SSE2_INTEGER", "SampleAfterValue": "2000000",
@@ -44,7 +39,6 @@ }, { "BriefDescription": "SSE* FP double precision Uops", - "Counter": "0,1,2,3", "EventCode": "0x10", "EventName": "FP_COMP_OPS_EXE.SSE_DOUBLE_PRECISION", "SampleAfterValue": "2000000",
@@ -52,7 +46,6 @@ }, { "BriefDescription": "SSE and SSE2 FP Uops", - "Counter": "0,1,2,3", "EventCode": "0x10", "EventName": "FP_COMP_OPS_EXE.SSE_FP", "SampleAfterValue": "2000000",
@@ -60,7 +53,6 @@ }, { "BriefDescription": "SSE FP packed Uops", - "Counter": "0,1,2,3", "EventCode": "0x10", "EventName": "FP_COMP_OPS_EXE.SSE_FP_PACKED", "SampleAfterValue": "2000000",
@@ -68,7 +60,6 @@ }, { "BriefDescription": "SSE FP scalar Uops", - "Counter": "0,1,2,3", "EventCode": "0x10", "EventName": "FP_COMP_OPS_EXE.SSE_FP_SCALAR", "SampleAfterValue": "2000000",
@@ -76,7 +67,6 @@ }, { "BriefDescription": "SSE* FP single precision Uops", - "Counter": "0,1,2,3", "EventCode": "0x10", "EventName": "FP_COMP_OPS_EXE.SSE_SINGLE_PRECISION", "SampleAfterValue": "2000000",
@@ -84,7 +74,6 @@ }, { "BriefDescription": "Computational floating-point operations executed", - "Counter": "0,1,2,3", "EventCode": "0x10", "EventName": "FP_COMP_OPS_EXE.X87", "SampleAfterValue": "2000000",
@@ -92,7 +81,6 @@ }, { "BriefDescription": "All Floating Point to and from MMX transitions", - "Counter": "0,1,2,3", "EventCode": "0xCC", "EventName": "FP_MMX_TRANS.ANY", "SampleAfterValue": "2000000",
@@ -100,7 +88,6 @@ }, { "BriefDescription": "Transitions from MMX to Floating Point instructions", - "Counter": "0,1,2,3", "EventCode": "0xCC", "EventName": "FP_MMX_TRANS.TO_FP", "SampleAfterValue": "2000000",
@@ -108,7 +95,6 @@ }, { "BriefDescription": "Transitions from Floating Point to MMX instructions", - "Counter": "0,1,2,3", "EventCode": "0xCC", "EventName": "FP_MMX_TRANS.TO_MMX", "SampleAfterValue": "2000000",
@@ -116,7 +102,6 @@ }, { "BriefDescription": "128 bit SIMD integer pack operations", - "Counter": "0,1,2,3", "EventCode": "0x12", "EventName": "SIMD_INT_128.PACK", "SampleAfterValue": "200000",
@@ -124,7 +109,6 @@ }, { "BriefDescription": "128 bit SIMD integer arithmetic operations", - "Counter": "0,1,2,3", "EventCode": "0x12", "EventName": "SIMD_INT_128.PACKED_ARITH", "SampleAfterValue": "200000",
@@ -132,7 +116,6 @@ }, { "BriefDescription": "128 bit SIMD integer logical operations", - "Counter": "0,1,2,3", "EventCode": "0x12", "EventName": "SIMD_INT_128.PACKED_LOGICAL", "SampleAfterValue": "200000",
@@ -140,7 +123,6 @@ }, { "BriefDescription": "128 bit SIMD integer multiply operations", - "Counter": "0,1,2,3", "EventCode": "0x12", "EventName": "SIMD_INT_128.PACKED_MPY", "SampleAfterValue": "200000",
@@ -148,7 +130,6 @@ }, { "BriefDescription": "128 bit SIMD integer shift operations", - "Counter": "0,1,2,3", "EventCode": "0x12", "EventName": "SIMD_INT_128.PACKED_SHIFT", "SampleAfterValue": "200000",
@@ -156,7 +137,6 @@ }, { "BriefDescription": "128 bit SIMD integer shuffle/move operations", - "Counter": "0,1,2,3", "EventCode": "0x12", "EventName": "SIMD_INT_128.SHUFFLE_MOVE", "SampleAfterValue": "200000",
@@ -164,7 +144,6 @@ }, { "BriefDescription": "128 bit SIMD integer unpack operations", - "Counter": "0,1,2,3", "EventCode": "0x12", "EventName": "SIMD_INT_128.UNPACK", "SampleAfterValue": "200000",
@@ -172,7 +151,6 @@ }, { "BriefDescription": "SIMD integer 64 bit pack operations", - "Counter": "0,1,2,3", "EventCode": "0xFD", "EventName": "SIMD_INT_64.PACK", "SampleAfterValue": "200000",
@@ -180,7 +158,6 @@ }, { "BriefDescription": "SIMD integer 64 bit arithmetic operations", - "Counter": "0,1,2,3", "EventCode": "0xFD", "EventName": "SIMD_INT_64.PACKED_ARITH", "SampleAfterValue": "200000",
@@ -188,7 +165,6 @@ }, { "BriefDescription": "SIMD integer 64 bit logical operations", - "Counter": "0,1,2,3", "EventCode": "0xFD", "EventName": "SIMD_INT_64.PACKED_LOGICAL", "SampleAfterValue": "200000",
@@ -196,7 +172,6 @@ }, { "BriefDescription": "SIMD integer 64 bit packed multiply operations", - "Counter": "0,1,2,3", "EventCode": "0xFD", "EventName": "SIMD_INT_64.PACKED_MPY", "SampleAfterValue": "200000",
@@ -204,7 +179,6 @@ }, { "BriefDescription": "SIMD integer 64 bit shift operations", - "Counter": "0,1,2,3", "EventCode": "0xFD", "EventName": "SIMD_INT_64.PACKED_SHIFT", "SampleAfterValue": "200000",
@@ -212,7 +186,6 @@ }, { "BriefDescription": "SIMD integer 64 bit shuffle/move operations", - "Counter": "0,1,2,3", "EventCode": "0xFD", "EventName": "SIMD_INT_64.SHUFFLE_MOVE", "SampleAfterValue": "200000",
@@ -220,7 +193,6 @@ }, { "BriefDescription": "SIMD integer 64 bit unpack operations", - "Counter": "0,1,2,3", "EventCode": "0xFD", "EventName": "SIMD_INT_64.UNPACK", "SampleAfterValue": "200000",
tools/perf/pmu-events/arch/x86/westmereep-dp/frontend.json +0 -3
@@ -1,7 +1,6 @@ [ { "BriefDescription": "Instructions decoded", - "Counter": "0,1,2,3", "EventCode": "0xD0", "EventName": "MACRO_INSTS.DECODED", "SampleAfterValue": "2000000",
@@ -9,7 +8,6 @@ }, { "BriefDescription": "Macro-fused instructions decoded", - "Counter": "0,1,2,3", "EventCode": "0xA6", "EventName": "MACRO_INSTS.FUSIONS_DECODED", "SampleAfterValue": "2000000",
@@ -17,7 +15,6 @@ }, { "BriefDescription": "Two Uop instructions decoded", - "Counter": "0,1,2,3", "EventCode": "0x19", "EventName": "TWO_UOP_INSTS_DECODED", "SampleAfterValue": "2000000",
tools/perf/pmu-events/arch/x86/westmereep-dp/memory.json +0 -137
173 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/westmereep-dp/other.json +0 -22
Lines of this file are not shown. View the raw message.
tools/perf/pmu-events/arch/x86/westmereep-dp/pipeline.json +5 -124
129 lines not on this page · raw message
tools/perf/pmu-events/arch/x86/westmereep-dp/virtual-memory.json +0 -21
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.39.0.314.g84b9a713c41-goog
Part of the diff is not shown here. View the raw message.