Skip to contentSkip to conversation

wifi: mt76: mt7915: add chip id condition in mt7915_check_eeprom()

PATCH New Shayne Chen 1 participant 1 message Dec 16, 2022

Subsystems (2)
lore
Share & tools
lore

Shayne Chen

author reviewer
#0 lore raw

PATCH v2 1/1 wifi: mt76: mt7915: add chip id condition in mt7915_check_eeprom()

When flash mode is enabled, and the eeprom data in the flash is not for the current chipset, it'll still be checked valid, and the default eeprom bin won't be loaded.
(e.g., mt7915 NIC inserted with mt7916 eeprom data in the flash.)

Fix this kind of case by adding chip id into consideration in mt7915_check_eeprom().

---
v2:
- use switch case and add a macro to convert return value

---
 drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c +4 -1
index 24efa280dd86..a79628933948 100644
@@ -33,11 +33,14 @@ static int mt7915_check_eeprom(struct mt7915_dev *dev)
 	u8 *eeprom = dev->mt76.eeprom.data;
 	u16 val = get_unaligned_le16(eeprom);
 
+#define CHECK_EEPROM_ERR(match)	(match ? 0 : -EINVAL)
 	switch (val) {
 	case 0x7915:
+		return CHECK_EEPROM_ERR(is_mt7915(&dev->mt76));
 	case 0x7916:
+		return CHECK_EEPROM_ERR(is_mt7916(&dev->mt76));
 	case 0x7986:
-		return 0;
+		return CHECK_EEPROM_ERR(is_mt7986(&dev->mt76));
 	default:
 		return -EINVAL;
 	}
Signature · 1 line
2.25.1