arm64: dts: imx8mp: Add Hantro G1, G2 DT nodes
Subsystems (2)
PATCH v3 1/1 arm64: dts: imx8mp: Add Hantro G1, G2 DT nodes
Add DT nodes for the Hantro VPU found in i.MX8MP SoC.
---
Cc: Abel Vesa <[email protected]>
Cc: Adam Ford <[email protected]>
Cc: Alexander Stein <[email protected]>
Cc: Ezequiel Garcia <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Jacky Bai <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Lucas Stach <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Markus Niebel <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: Peng Fan <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Richard Cochran <[email protected]>
Cc: Richard Zhu <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Shawn Guo <[email protected]>
To: [email protected]
---
V2: Drop the VC8000E
V3: - Drop assigned-clock-rates from G1 and G2 subnodes
- Add RB from Laurent
--- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
arch/arm64/boot/dts/freescale/imx8mp.dtsi +23 -0
@@ -1639,6 +1639,26 @@ gpu2d: gpu@38008000 { power-domains = <&pgc_gpu2d>; }; + vpu_g1: video-codec@38300000 { + compatible = "nxp,imx8mm-vpu-g1"; + reg = <0x38300000 0x10000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>; + assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>; + assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>; + power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G1>; + }; + + vpu_g2: video-codec@38310000 { + compatible = "nxp,imx8mq-vpu-g2"; + reg = <0x38310000 0x10000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>; + assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>; + assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>; + power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G2>; + }; + vpumix_blk_ctrl: blk-ctrl@38330000 { compatible = "fsl,imx8mp-vpu-blk-ctrl", "syscon"; reg = <0x38330000 0x100>;
@@ -1650,6 +1670,9 @@ vpumix_blk_ctrl: blk-ctrl@38330000 { <&clk IMX8MP_CLK_VPU_G2_ROOT>, <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>; clock-names = "g1", "g2", "vc8000e"; + assigned-clocks = <&clk IMX8MP_CLK_VPU_BUS>; + assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>; + assigned-clock-rates = <700000000>; interconnects = <&noc IMX8MP_ICM_VPU_G1 &noc IMX8MP_ICN_VIDEO>, <&noc IMX8MP_ICM_VPU_G2 &noc IMX8MP_ICN_VIDEO>, <&noc IMX8MP_ICM_VPU_H1 &noc IMX8MP_ICN_VIDEO>;
Signature · 7 lines
2.35.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Am Sonntag, dem 18.12.2022 um 19:36 +0100 schrieb Marek Vasut:
Quoted 21 lines
Add DT nodes for the Hantro VPU found in i.MX8MP SoC.
Reviewed-by Laurent Pinchart <[email protected]>Signed-off-by Marek Vasut <[email protected]>---
Cc: Abel Vesa <[email protected]>
Cc: Adam Ford <[email protected]>
Cc: Alexander Stein <[email protected]>
Cc: Ezequiel Garcia <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Jacky Bai <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Lucas Stach <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Markus Niebel <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: Peng Fan <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Richard Cochran <[email protected]>
Cc: Richard Zhu <[email protected]>
Quoted 8 lines
Cc: Rob Herring <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Shawn Guo <[email protected]>
To: [email protected]
---
V2: Drop the VC8000E
V3: - Drop assigned-clock-rates from G1 and G2 subnodes
- Add RB from Laurent
Most clocks are defaulting to the 24MHz OSC clock, so not doing any setup is not going to give you usable VPU performance. Please assign proper parents and rates for nominal mode.
Regards,
Lucas
Quoted 36 lines
--- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)arch/arm64/boot/dts/freescale/imx8mp.dtsi +20
-0@@ -1639,6 +1639,26 @@ gpu2d: gpu@38008000 { power-domains = <&pgc_gpu2d>; }; + vpu_g1: video-codec@38300000 { + compatible = "nxp,imx8mm-vpu-g1"; + reg = <0x38300000 0x10000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>; + assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>; + assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>; + power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G1>; + }; + + vpu_g2: video-codec@38310000 { + compatible = "nxp,imx8mq-vpu-g2"; + reg = <0x38310000 0x10000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>; + assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>; + assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>; + power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G2>; + }; + vpumix_blk_ctrl: blk-ctrl@38330000 { compatible = "fsl,imx8mp-vpu-blk-ctrl", "syscon"; reg = <0x38330000 0x100>;
arch/arm64/boot/dts/freescale/imx8mp.dtsi vpumix_blk_ctrl: blk-ctrl@38330000 { · line 1678
Quoted 9 lines
arch/arm64/boot/dts/freescale/imx8mp.dtsi +3
-0@@ -1650,6 +1670,9 @@ vpumix_blk_ctrl: blk-ctrl@38330000 { <&clk IMX8MP_CLK_VPU_G2_ROOT>, <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>; clock-names = "g1", "g2", "vc8000e"; + assigned-clocks = <&clk IMX8MP_CLK_VPU_BUS>; + assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>; + assigned-clock-rates = <700000000>; interconnects = <&noc IMX8MP_ICM_VPU_G1 &noc IMX8MP_ICN_VIDEO>, <&noc IMX8MP_ICM_VPU_G2 &noc IMX8MP_ICN_VIDEO>, <&noc IMX8MP_ICM_VPU_H1 &noc IMX8MP_ICN_VIDEO>;
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel