xen/arm: Allow to set grant table related limits for dom0less domUs
PATCH v2 1/1 xen/arm: Allow to set grant table related limits for dom0less domUs
At the moment, for dom0less domUs, we do not have a way to specify per domain grant table related limits (unlike when using xl), namely max version, max number of grant frames, max number of maptrack frames. This means that such domains always use the values specified by the Xen command line parameters or their default values if unspecified.
In order to have more control over dom0less domUs, introduce the following device-tree properties that can be set under domUs nodes:
- max_grant_version to set the maximum grant table version the domain is allowed to use,
- max_grant_frames to set the maximum number of grant frames the domain is allowed to have,
- max_maptrack_frames to set the maximum number of grant maptrack frames the domain is allowed to have.
Update documentation accordingly.
Note that the values obtained from device tree are of type uint32_t, whereas the d_cfg.max_{grant_frames,maptrack_frames} are of type int32_t. Call panic in case of overflow. Other sanity checks are already there in grant_table_init() resulting in panic in case of errors, therefore no need to repeat them in create_domUs().
---
Changes in v2:
- call panic in case of int32_t overflow
--- docs/misc/arm/device-tree/booting.txt | 21 +++++++++++++++++++++ xen/arch/arm/domain_build.c | 18 ++++++++++++++++++ 2 files changed, 39 insertions(+)
docs/misc/arm/device-tree/booting.txt +21 -0
@@ -223,6 +223,27 @@ with the following properties: the default size of domain P2M pool, i.e. 1MB per guest vCPU plus 4KB per MB of guest RAM plus 512KB for guest extended regions. +- max_grant_version + + Optional. A 32-bit integer specifying the maximum grant table version + the domain is allowed to use (valid values are 1 or 2). If this property + is missing, the value specified by Xen command line parameter gnttab=max-ver + (or its default value if unspecified, i.e. 1) is used. + +- max_grant_frames + + Optional. A 32-bit integer specifying the maximum number of grant frames + the domain is allowed to have. If this property is missing, the value + specified by Xen command line parameter gnttab_max_frames (or its default + value if unspecified, i.e. 64) is used. + +- max_maptrack_frames + + Optional. A 32-bit integer specifying the maximum number of grant maptrack + frames the domain is allowed to have. If this property is missing, the + value specified by Xen command line parameter gnttab_max_maptrack_frames + (or its default value if unspecified, i.e. 1024) is used. + Under the "xen,domain" compatible node, one or more sub-nodes are present for the DomU kernel and ramdisk.
xen/arch/arm/domain_build.c +18 -0
@@ -3872,6 +3872,7 @@ void __init create_domUs(void) .grant_opts = XEN_DOMCTL_GRANT_version(opt_gnttab_max_version), };unsigned int flags =0U ; +uint32_t val;if ( !dt_device_is_compatible (node,"xen,domain" ) )continue ;
@@ -3940,6 +3941,23 @@ void __init create_domUs(void) d_cfg.cpupool_id = pool_id; } +if (dt_property_read_u32 (node,"max_grant_version" , &val) ) + d_cfg.grant_opts =XEN_DOMCTL_GRANT_version (val); + +if (dt_property_read_u32 (node,"max_grant_frames" , &val) ) + { +if ( val >INT32_MAX ) +panic ("max_grant_frames (%" PRIu32") overflow\n" , val); + d_cfg.max_grant_frames = val; + } + +if (dt_property_read_u32 (node,"max_maptrack_frames" , &val) ) + { +if ( val >INT32_MAX ) +panic ("max_maptrack_frames (%" PRIu32") overflow\n" , val); + d_cfg.max_maptrack_frames = val; + } +/* * The variable max_init_domid is initialized with zero, so here it's * very important to use the pre-increment operator to call
Signature · 1 line
2.25.1
Quoted 17 lines · Michal Orzel
At the moment, for dom0less domUs, we do not have a way to specify per domain grant table related limits (unlike when using xl), namely max version, max number of grant frames, max number of maptrack frames. This means that such domains always use the values specified by the Xen command line parameters or their default values if unspecified.
In order to have more control over dom0less domUs, introduce the following device-tree properties that can be set under domUs nodes:
-max_grant_versionto set the maximum grant table version the domain is allowed to use,
-max_grant_framesto set the maximum number of grant frames the domain is allowed to have,
-max_maptrack_framesto set the maximum number of grant maptrack frames the domain is allowed to have.Update documentation accordingly.
Quoted 7 lines
Note that the values obtained from device tree are of type
uint32_t, whereas the d_cfg.max_{grant_frames,maptrack_frames} are of typeint32_t. Call panic in case of overflow. Other sanity checks are already there ingrant_table_init()resulting in panic in case of errors, therefore no need to repeat them increate_domUs().Signed-off-by Michal Orzel <[email protected]>
Quoted 79 lines
---
Changes in v2:
- call panic in case ofint32_toverflow--- docs/misc/arm/device-tree/booting.txt | 21 +++++++++++++++++++++ xen/arch/arm/domain_build.c | 18 ++++++++++++++++++ 2 files changed, 39 insertions(+)docs/misc/arm/device-tree/booting.txt +21
-0@@ -223,6 +223,27 @@ with the following properties: the default size of domain P2M pool, i.e. 1MB per guest vCPU plus 4KB per MB of guest RAM plus 512KB for guest extended regions. +- max_grant_version + + Optional. A 32-bit integer specifying the maximum grant table version + the domain is allowed to use (valid values are 1 or 2). If this property + is missing, the value specified by Xen command line parameter gnttab=max-ver + (or its default value if unspecified, i.e. 1) is used. + +- max_grant_frames + + Optional. A 32-bit integer specifying the maximum number of grant frames + the domain is allowed to have. If this property is missing, the value + specified by Xen command line parameter gnttab_max_frames (or its default + value if unspecified, i.e. 64) is used. + +- max_maptrack_frames + + Optional. A 32-bit integer specifying the maximum number of grant maptrack + frames the domain is allowed to have. If this property is missing, the + value specified by Xen command line parameter gnttab_max_maptrack_frames + (or its default value if unspecified, i.e. 1024) is used. + Under the "xen,domain" compatible node, one or more sub-nodes are present for the DomU kernel and ramdisk.xen/arch/arm/domain_build.c +18
-0@@ -3872,6 +3872,7 @@ void __init create_domUs(void) .grant_opts = XEN_DOMCTL_GRANT_version(opt_gnttab_max_version), };unsigned int flags =0U ; +uint32_t val;if ( !dt_device_is_compatible (node,"xen,domain" ) )continue ;@@ -3940,6 +3941,23 @@ void __init create_domUs(void) d_cfg.cpupool_id = pool_id; } +if (dt_property_read_u32 (node,"max_grant_version" , &val) ) + d_cfg.grant_opts =XEN_DOMCTL_GRANT_version (val); + +if (dt_property_read_u32 (node,"max_grant_frames" , &val) ) + { +if ( val >INT32_MAX ) +panic ("max_grant_frames (%" PRIu32") overflow\n" , val); + d_cfg.max_grant_frames = val; + } + +if (dt_property_read_u32 (node,"max_maptrack_frames" , &val) ) + { +if ( val >INT32_MAX ) +panic ("max_maptrack_frames (%" PRIu32") overflow\n" , val); + d_cfg.max_maptrack_frames = val; + } +/* * The variable max_init_domid is initialized with zero, so here it's * very important to use the pre-increment operator to call Signature · 1 line
2.25.1