nvme-pci: place chain addresses in iod
PATCH 1/1 nvme-pci: place chain addresses in iod
From: Keith Busch <[email protected]>
The iod space is appended at the end of the preallocate 'struct request', and padded to the cache line size. This leaves some free memory (in most kernel configs) up for grabs.
Instead of appending the prp list chaining addresses after the scatterlist, inline these in the struct nvme_iod. This leaves room for one more scatterlist element in the mempool for a nice even number: 128.
And without increasing the size of the preallocated requests, we can hold up to 5 chaining elements, allowing the driver to increase its max transfer size to 8MB.
--- drivers/nvme/host/pci.c | 44 ++++++++++++----------------------------- 1 file changed, 13 insertions(+), 31 deletions(-)
drivers/nvme/host/pci.c +13 -31
@@ -42,8 +42,9 @@* These can be higher, but we need to ensure that any command doesn't * require an sg allocation that needs more than a page of data. */ -#define NVME_MAX_KB_SZ 4096 -#define NVME_MAX_SEGS 127 +#define NVME_MAX_KB_SZ 8192 +#define NVME_MAX_SEGS 128 +#define NVME_MAX_CHAINS 5static int use_threaded_interrupts;module_param (use_threaded_interrupts, int,0444 );
@@ -232,6 +233,7 @@ struct nvme_iod {dma_addr_t first_dma;dma_addr_t meta_dma;struct sg_table sgt; +void *list[NVME_MAX_CHAINS ]; };static inline unsigned int nvme_dbbuf_size (struct nvme_dev *dev)
@@ -385,16 +387,6 @@ static int nvme_pci_npages_prp(void)return DIV_ROUND_UP (8 * nprps,NVME_CTRL_PAGE_SIZE -8 ); } -/* -* Calculates the number of pages needed for the SGL segments. For example a 4k -* page can accommodate 256 SGL descriptors. -*/ -static int nvme_pci_npages_sgl (void ) -{ -return DIV_ROUND_UP (NVME_MAX_SEGS *sizeof (struct nvme_sgl_desc ), -NVME_CTRL_PAGE_SIZE ); -} -static int nvme_admin_init_hctx (struct blk_mq_hw_ctx *hctx,void *data,unsigned int hctx_idx) {
@@ -508,12 +500,6 @@ static void nvme_commit_rqs(struct blk_mq_hw_ctx *hctx)spin_unlock (&nvmeq->sq_lock); } -static void **nvme_pci_iod_list (struct request *req) -{ -struct nvme_iod *iod =blk_mq_rq_to_pdu (req); -return (void **)(iod->sgt.sgl +blk_rq_nr_phys_segments (req)); -} -static inline bool nvme_pci_use_sgls (struct nvme_dev *dev,struct request *req,int nseg) {
@@ -539,7 +525,7 @@ static void nvme_free_prps(struct nvme_dev *dev, struct request *req)int i;for (i =0 ; i < iod->nr_allocations; i++) { -__le64 *prp_list =nvme_pci_iod_list (req)[i]; +__le64 *prp_list = iod->list[i];dma_addr_t next_dma_addr =le64_to_cpu (prp_list[last_prp]);dma_pool_free (dev->prp_page_pool, prp_list, dma_addr);
@@ -562,10 +548,10 @@ static void nvme_unmap_data(struct nvme_dev *dev, struct request *req)dma_unmap_sgtable (dev->dev, &iod->sgt,rq_dma_dir (req),0 );if (iod->nr_allocations ==0 ) -dma_pool_free (dev->prp_small_pool,nvme_pci_iod_list (req)[0 ], +dma_pool_free (dev->prp_small_pool, iod->list[0 ], iod->first_dma);else if (iod->use_sgl) -dma_pool_free (dev->prp_page_pool,nvme_pci_iod_list (req)[0 ], +dma_pool_free (dev->prp_page_pool, iod->list[0 ], iod->first_dma);else nvme_free_prps (dev, req);
@@ -597,7 +583,6 @@ static blk_status_t nvme_pci_setup_prps(struct nvme_dev *dev,u64 dma_addr =sg_dma_address (sg);int offset = dma_addr & (NVME_CTRL_PAGE_SIZE -1 );__le64 *prp_list; -void **list =nvme_pci_iod_list (req);dma_addr_t prp_dma;int nprps, i;
@@ -635,7 +620,7 @@ static blk_status_t nvme_pci_setup_prps(struct nvme_dev *dev, iod->nr_allocations =-1 ;return BLK_STS_RESOURCE ; } - list[0 ] = prp_list; + iod->list[0 ] = prp_list; iod->first_dma = prp_dma; i =0 ;for (;;) {
@@ -644,7 +629,7 @@ static blk_status_t nvme_pci_setup_prps(struct nvme_dev *dev, prp_list =dma_pool_alloc (pool,GFP_ATOMIC , &prp_dma);if (!prp_list) goto free_prps; - list[iod->nr_allocations++] = prp_list; + iod->list[iod->nr_allocations++] = prp_list; prp_list[0 ] = old_prp_list[i -1 ]; old_prp_list[i -1 ] =cpu_to_le64 (prp_dma); i =1 ;
@@ -726,7 +711,7 @@ static blk_status_t nvme_pci_setup_sgls(struct nvme_dev *dev,return BLK_STS_RESOURCE ; } -nvme_pci_iod_list (req)[0 ] = sg_list; + iod->list[0 ] = sg_list; iod->first_dma = sgl_dma;nvme_pci_sgl_set_seg (&cmd->dptr.sgl, sgl_dma, entries);
@@ -2659,11 +2644,8 @@ static void nvme_release_prp_pools(struct nvme_dev *dev)static int nvme_pci_alloc_iod_mempool (struct nvme_dev *dev) { -size_t npages =max (nvme_pci_npages_prp (),nvme_pci_npages_sgl ()); -size_t alloc_size =sizeof (__le64 *) * npages + -sizeof (struct scatterlist ) *NVME_MAX_SEGS ; +size_t alloc_size =sizeof (struct scatterlist ) *NVME_MAX_SEGS ; -WARN_ON_ONCE (alloc_size >PAGE_SIZE ); dev->iod_mempool = mempool_create_node(1, mempool_kmalloc, mempool_kfree, (void *)alloc_size, GFP_KERNEL,
@@ -3483,9 +3465,9 @@ static int __init nvme_init(void)BUILD_BUG_ON (sizeof (struct nvme_create_sq ) !=64 );BUILD_BUG_ON (sizeof (struct nvme_delete_queue ) !=64 );BUILD_BUG_ON (IRQ_AFFINITY_MAX_SETS <2 ); -BUILD_BUG_ON (DIV_ROUND_UP (nvme_pci_npages_prp (),NVME_CTRL_PAGE_SIZE ) > -S8_MAX );BUILD_BUG_ON (NVME_MAX_SEGS >SGES_PER_PAGE ); +BUILD_BUG_ON (sizeof (struct scatterlist ) *NVME_MAX_SEGS >PAGE_SIZE ); +BUILD_BUG_ON (nvme_pci_npages_prp () >NVME_MAX_CHAINS );return pci_register_driver (&nvme_driver); }
Signature · 1 line
2.30.2
Christoph Hellwig
maintainerdrivers/nvme/host/pci.c line 47
Quoted 5 lines · Keith Busch
drivers/nvme/host/pci.c +3
-2-#define NVME_MAX_KB_SZ 4096 -#define NVME_MAX_SEGS 127 +#define NVME_MAX_KB_SZ 8192 +#define NVME_MAX_SEGS 128 +#define NVME_MAX_CHAINS 5
NVME_MAX_CHAINS sounds a bit odd. Maybe MAX_ALLOCATIONS to match the nr_allocations field?
drivers/nvme/host/pci.c struct nvme_iod { · line 236
Quoted 8 lines
static int
use_threaded_interrupts;module_param(use_threaded_interrupts, int, 0444);drivers/nvme/host/pci.c +1
-0@@ -232,6 +233,7 @@ struct nvme_iod {dma_addr_t first_dma;dma_addr_t meta_dma;struct sg_table sgt; +void *list[NVME_MAX_CHAINS ];
I think this should a union nvme_data_ptr * so that we have some typing information.
Sagi Grimberg
maintainerQuoted 10 lines · Keith Busch
drivers/nvme/host/pci.c line 47
Quoted 5 lines
drivers/nvme/host/pci.c +3
-2-#define NVME_MAX_KB_SZ 4096 -#define NVME_MAX_SEGS 127 +#define NVME_MAX_KB_SZ 8192 +#define NVME_MAX_SEGS 128 +#define NVME_MAX_CHAINS 5
NVME_MAX_CHAINSsounds a bit odd. MaybeMAX_ALLOCATIONSto match thenr_allocationsfield?
Makes sense.
Quoted 12 lines
drivers/nvme/host/pci.c struct nvme_iod { · line 236
Quoted 9 lines
static int use_threaded_interrupts; module_param(use_threaded_interrupts, int, 0444);drivers/nvme/host/pci.c +1
-0@@ -232,6 +233,7 @@ struct nvme_iod {dma_addr_t first_dma;dma_addr_t meta_dma;struct sg_table sgt; +void *list[NVME_MAX_CHAINS ];I think this should a union
nvme_data_ptr* so that we have some typing information.
nvme_data_ptr is a wire struct, Maybe it would be better if nvme-pci had its own union for this.
Also, "list" is not a great name, primarily because it is not a list... maybe data_ptrs ?