Skip to contentSkip to conversation

xfstests: update verity tests for non-4K block and page size

PATCH Superseded Eric Biggers 3 participants 16 messages Dec 23, 2022 – Dec 29, 2022 fscrypt: file system level encryption support

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Eric Biggers

author maintainer
#0 lore raw

v2 cover xfstests: update verity tests for non-4K block and page size

This series updates the verity xfstests to eliminate implicit assumptions that 'merkle_tree_block_size == fs_block_size == page_size == 4096', and to provide some test coverage for cases where merkle_tree_block_size differs from fs_block_size and/or page_size. It doesn't add any new test scripts, but it does update some of the existing test scripts to test multiple block sizes.

This goes along with my kernel patch series
"fsverity: support for non-4K pages"
(https://lore.kernel.org/linux-fsdevel/[email protected]/T/#u).
However, it's not necessary to wait for that kernel patch series to be applied before applying this xfstests patch series.

Changed since v1:
- Adjusted the output of generic/574, generic/575, and generic/624 slightly to avoid confusion.

Eric Biggers (10):
common/verity: add and use _fsv_can_enable() common/verity: set FSV_BLOCK_SIZE to an appropriate value common/verity: use FSV_BLOCK_SIZE by default common/verity: add _filter_fsverity_digest() generic/572: support non-4K Merkle tree block size generic/573: support non-4K Merkle tree block size generic/577: support non-4K Merkle tree block size generic/574: test multiple Merkle tree block sizes generic/624: test multiple Merkle tree block sizes generic/575: test 1K Merkle tree block size

 common/verity         |  84 +++++++++++++++-----
 tests/generic/572     |  21 ++---
 tests/generic/572.out |  10 +--
 tests/generic/573     |   8 +-
 tests/generic/574     | 177 ++++++++++++++++++++++++++----------------
 tests/generic/574.out |  83 ++------------------
 tests/generic/575     |  57 ++++++++++----
 tests/generic/575.out |   8 +-
 tests/generic/577     |  24 +++---
 tests/generic/577.out |  10 +--
 tests/generic/624     | 119 ++++++++++++++++++++--------
 tests/generic/624.out |  15 ++--
 12 files changed, 348 insertions(+), 268 deletions(-)

base-commit: e263104046712af5fb5dcc7d289ac3fa5f14b764

Signature · 1 line
2.39.0
author maintainer
#1 lore raw

PATCH v2 1/10 common/verity: add and use _fsv_can_enable()

From: Eric Biggers <[email protected]>

Replace _fsv_have_hash_algorithm() with a more general function _fsv_can_enable() which checks whether 'fsverity enable' with the given parameters works. For now it is just used with --hash-alg or with no parameters, but soon it will be used with --block-size too.

---
 common/verity     | 17 ++++++-----------
 tests/generic/575 |  2 +-
 tests/generic/577 |  2 +-
 3 files changed, 8 insertions(+), 13 deletions(-)
common/verity +6 -11
index f98dcb07..1a53a7ea 100644
@@ -42,13 +42,7 @@ _require_scratch_verity()
 	# The filesystem may have fs-verity enabled but not actually usable by
 	# default.  E.g., ext4 only supports verity on extent-based files, so it
 	# doesn't work on ext3-style filesystems.  So, try actually using it.
-	echo foo > $SCRATCH_MNT/tmpfile
-	_disable_fsverity_signatures
-	_fsv_enable $SCRATCH_MNT/tmpfile
-	local status=$?
-	_restore_prev_fsverity_signatures
-	rm -f $SCRATCH_MNT/tmpfile
-	if (( $status != 0 )); then
+	if ! _fsv_can_enable $SCRATCH_MNT/tmpfile; then
 		_notrun "$FSTYP verity isn't usable by default with these mkfs options"
 	fi
 
@@ -256,15 +250,16 @@ _fsv_create_enable_file()
 	_fsv_enable "$file" "$@"
 }
 
-_fsv_have_hash_algorithm()
+_fsv_can_enable()
 {
-	local hash_alg=$1
-	local test_file=$2
+	local test_file=$1
+	shift
+	local params=("$@")
 
 	_disable_fsverity_signatures
 	rm -f $test_file
 	head -c 4096 /dev/zero > $test_file
-	_fsv_enable --hash-alg=$hash_alg $test_file &>> $seqres.full
+	_fsv_enable $test_file "${params[@]}" &>> $seqres.full
 	local status=$?
 	_restore_prev_fsverity_signatures
 	rm -f $test_file
tests/generic/575 +1 -1
index ffa6b61d..0ece8826 100755
@@ -71,7 +71,7 @@ test_alg()
 
 	_fsv_scratch_begin_subtest "Check for expected measurement values ($alg)"
 
-	if ! _fsv_have_hash_algorithm $alg $fsv_file; then
+	if ! _fsv_can_enable $fsv_file --hash-alg=$alg; then
 		if [ "$alg" = sha256 ]; then
 			_fail "Something is wrong - sha256 hash should always be available"
 		fi
tests/generic/577 +1 -1
index 5f7e0573..85d680df 100755
@@ -112,7 +112,7 @@ _fsv_enable $fsv_file --signature=$sigfile.salted --salt=abcd
 cmp $fsv_file $fsv_orig_file
 
 echo -e "\n# Testing non-default hash algorithm"
-if _fsv_have_hash_algorithm sha512 $fsv_file; then
+if _fsv_can_enable $fsv_file --hash-alg=sha512; then
 	reset_fsv_file
 	_fsv_sign $fsv_orig_file $sigfile.sha512 --key=$keyfile \
 		--cert=$certfile --hash-alg=sha512 > /dev/null
Signature · 1 line
2.39.0
author maintainer
#2 lore raw

PATCH v2 2/10 common/verity: set FSV_BLOCK_SIZE to an appropriate value

In reply to Eric Biggers

From: Eric Biggers <[email protected]>

In order to maximize the chance that the verity tests can actually be run, FSV_BLOCK_SIZE (the default Merkle tree size for the verity tests) needs to be min(fs_block_size, page_size), not simply page_size. The only reason that page_size was okay before was because the kernel only supported merkle_tree_block_size == fs_block_size == page_size anyway. But that is changing.

---
 common/verity | 32 +++++++++++++++++++++++++++-----
 1 file changed, 27 insertions(+), 5 deletions(-)
common/verity +27 -5
index 1a53a7ea..a94ebf8e 100644
@@ -13,6 +13,11 @@ if [ "$FSTYP" == "btrfs" ]; then
         fi
 fi
 
+# Require fs-verity support on the scratch filesystem.
+#
+# FSV_BLOCK_SIZE will be set to a Merkle tree block size that is supported by
+# the filesystem.  Other sizes may be supported too, but FSV_BLOCK_SIZE is the
+# only size that is guaranteed to work without any additional checks.
 _require_scratch_verity()
 {
 	_require_scratch
@@ -27,7 +32,7 @@ _require_scratch_verity()
 
 	# Try to mount the filesystem.  If this fails then either the kernel
 	# isn't aware of fs-verity, or the mkfs options were not compatible with
-	# verity (e.g. ext4 with block size != PAGE_SIZE).
+	# verity (e.g. ext4 with block size != PAGE_SIZE on old kernels).
 	if ! _try_scratch_mount &>>$seqres.full; then
 		_notrun "kernel is unaware of $FSTYP verity feature," \
 			"or mkfs options are not compatible with verity"
@@ -39,6 +44,27 @@ _require_scratch_verity()
 		_notrun "kernel $FSTYP isn't configured with verity support"
 	fi
 
+	# Select a default Merkle tree block size for when tests don't
+	# explicitly specify one.
+	#
+	# For consistency reasons, all 'fsverity' subcommands, including
+	# 'fsverity enable', default to 4K Merkle tree blocks.  That's generally
+	# not ideal for tests, since it's possible that the filesystem doesn't
+	# support 4K blocks but does support another size.  Specifically, the
+	# kernel originally supported only merkle_tree_block_size ==
+	# fs_block_size == page_size, and later it was updated to support
+	# merkle_tree_block_size <= min(fs_block_size, page_size).
+	#
+	# Therefore, we default to merkle_tree_block_size == min(fs_block_size,
+	# page_size).  That maximizes the chance of verity actually working.
+	local fs_block_size=$(_get_block_size $SCRATCH_MNT)
+	local page_size=$(get_page_size)
+	if (( fs_block_size <= page_size )); then
+		FSV_BLOCK_SIZE=$fs_block_size
+	else
+		FSV_BLOCK_SIZE=$page_size
+	fi
+
 	# The filesystem may have fs-verity enabled but not actually usable by
 	# default.  E.g., ext4 only supports verity on extent-based files, so it
 	# doesn't work on ext3-style filesystems.  So, try actually using it.
@@ -47,10 +73,6 @@ _require_scratch_verity()
 	fi
 
 	_scratch_unmount
-
-	# Merkle tree block size.  Currently all filesystems only support
-	# PAGE_SIZE for this.  This is also the default for 'fsverity enable'.
-	FSV_BLOCK_SIZE=$(get_page_size)
 }
 
 # Check for CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y, as well as the userspace
Signature · 1 line
2.39.0
author maintainer
#3 lore raw

PATCH v2 3/10 common/verity: use FSV_BLOCK_SIZE by default

In reply to Eric Biggers

From: Eric Biggers <[email protected]>

Make _fsv_enable() and _fsv_sign() default to FSV_BLOCK_SIZE if no block size is explicitly specified, so that the individual tests don't have to do this themselves. This overrides the fsverity-utils default of 4096 bytes, or the page size in older versions of fsverity-utils, both of which may differ from FSV_BLOCK_SIZE.

---
 common/verity | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)
common/verity +14 -2
index a94ebf8e..1c706b80 100644
@@ -249,7 +249,13 @@ _fsv_dump_signature()
 
 _fsv_enable()
 {
-	$FSVERITY_PROG enable "$@"
+	local args=("$@")
+	# If the caller didn't explicitly specify a Merkle tree block size, then
+	# use FSV_BLOCK_SIZE.
+	if ! [[ " $*" =~ " --block-size" ]]; then
+		args+=("--block-size=$FSV_BLOCK_SIZE")
+	fi
+	$FSVERITY_PROG enable "${args[@]}"
 }
 
 _fsv_measure()
@@ -259,7 +265,13 @@ _fsv_measure()
 
 _fsv_sign()
 {
-	$FSVERITY_PROG sign "$@"
+	local args=("$@")
+	# If the caller didn't explicitly specify a Merkle tree block size, then
+	# use FSV_BLOCK_SIZE.
+	if ! [[ " $*" =~ " --block-size" ]]; then
+		args+=("--block-size=$FSV_BLOCK_SIZE")
+	fi
+	$FSVERITY_PROG sign "${args[@]}"
 }
 
 # Generate a file, then enable verity on it.
Signature · 1 line
2.39.0
author maintainer
#4 lore raw

PATCH v2 4/10 common/verity: add _filter_fsverity_digest()

In reply to Eric Biggers

From: Eric Biggers <[email protected]>

Add a filter that replaces fs-verity digests with a fixed string. This is needed because the fs-verity digests that some tests print are going to start depending on the default Merkle tree block size.

---
 common/verity | 8 ++++++++
 1 file changed, 8 insertions(+)
common/verity +8 -0
index 1c706b80..b88e839b 100644
@@ -406,3 +406,11 @@ _require_fsverity_max_file_size_limit()
 		;;
 	esac
 }
+
+# Replace fs-verity digests, as formatted by the 'fsverity' tool, with <digest>.
+# This function can be used by tests where fs-verity digests depend on the
+# default Merkle tree block size (FSV_BLOCK_SIZE).
+_filter_fsverity_digest()
+{
+	sed -E 's/\b(sha(256|512)):[a-f0-9]{64,}\b/\1:<digest>/'
+}
Signature · 1 line
2.39.0
author maintainer
#5 lore raw

PATCH v2 5/10 generic/572: support non-4K Merkle tree block size

In reply to Eric Biggers

From: Eric Biggers <[email protected]>

Update generic/572 to not implicitly assume that the Merkle tree block size being used is 4096 bytes. Also remove an unused function.

---
 tests/generic/572     | 21 ++++++---------------
 tests/generic/572.out | 10 +++-------
 2 files changed, 9 insertions(+), 22 deletions(-)
tests/generic/572 +6 -15
index cded9ac6..d8071a34 100755
@@ -9,7 +9,7 @@
 # - conditions for enabling verity
 # - verity files have correct contents and size
 # - can't change contents of verity files, but can change metadata
-# - can retrieve a verity file's measurement via FS_IOC_MEASURE_VERITY
+# - can retrieve a verity file's digest via FS_IOC_MEASURE_VERITY
 #
 . ./common/preamble
 _begin_fstest auto quick verity
@@ -48,15 +48,6 @@ verify_data_readable()
 	md5sum $file > /dev/null
 }
 
-verify_data_unreadable()
-{
-	local file=$1
-
-	# try both reading just the first data block, and reading until EOF
-	head -c $FSV_BLOCK_SIZE $file 2>&1 >/dev/null | filter_output
-	md5sum $file |& filter_output
-}
-
 _fsv_scratch_begin_subtest "Enabling verity on file with verity already enabled fails with EEXIST"
 _fsv_create_enable_file $fsv_file
 echo "(trying again)"
@@ -94,7 +85,7 @@ verify_data_readable $fsv_file
 _fsv_scratch_begin_subtest "Enabling verity can be interrupted"
 dd if=/dev/zero of=$fsv_file bs=1 count=0 seek=$((1 << 34)) status=none
 start_time=$(date +%s)
-$FSVERITY_PROG enable $fsv_file &
+$FSVERITY_PROG enable --block-size=$FSV_BLOCK_SIZE $fsv_file &
 sleep 0.5
 kill %1
 wait
@@ -106,7 +97,7 @@ fi
 _fsv_scratch_begin_subtest "Enabling verity on file with verity already being enabled fails with EBUSY"
 dd if=/dev/zero of=$fsv_file bs=1 count=0 seek=$((1 << 34)) status=none
 start_time=$(date +%s)
-$FSVERITY_PROG enable $fsv_file &
+$FSVERITY_PROG enable --block-size=$FSV_BLOCK_SIZE $fsv_file &
 sleep 0.5
 _fsv_enable $fsv_file |& filter_output
 kill %1
@@ -129,7 +120,7 @@ verify_data_readable $fsv_file
 
 _fsv_scratch_begin_subtest "verity file can be measured"
 _fsv_create_enable_file $fsv_file >> $seqres.full
-_fsv_measure $fsv_file
+_fsv_measure $fsv_file | _filter_fsverity_digest
 
 _fsv_scratch_begin_subtest "verity file can be renamed"
 _fsv_create_enable_file $fsv_file
@@ -170,8 +161,8 @@ verify_data_readable $fsv_file
 
 # Test files <= 1 block in size.  These are a bit of a special case since there
 # are no hash blocks; the root hash is calculated directly over the data block.
+_fsv_scratch_begin_subtest "verity on small files"
 for size in 1 $((FSV_BLOCK_SIZE - 1)) $FSV_BLOCK_SIZE; do
-	_fsv_scratch_begin_subtest "verity on $size-byte file"
 	head -c $size /dev/urandom > $fsv_orig_file
 	cp $fsv_orig_file $fsv_file
 	_fsv_enable $fsv_file
@@ -179,7 +170,7 @@ for size in 1 $((FSV_BLOCK_SIZE - 1)) $FSV_BLOCK_SIZE; do
 	rm -f $fsv_file
 done
 
-_fsv_scratch_begin_subtest "verity on 100M file (multiple levels in hash tree)"
+_fsv_scratch_begin_subtest "verity on 100MB file (multiple levels in hash tree)"
 head -c 100000000 /dev/urandom > $fsv_orig_file
 cp $fsv_orig_file $fsv_file
 _fsv_enable $fsv_file
tests/generic/572.out +3 -7
index ad381629..d703835b 100644
@@ -39,7 +39,7 @@ bash: SCRATCH_MNT/file.fsv: Operation not permitted
 # verity file can be read
 
 # verity file can be measured
-sha256:be54121da3877f8852c65136d731784f134c4dd9d95071502e80d7be9f99b263
+sha256:<digest>
 
 # verity file can be renamed
 
@@ -58,16 +58,12 @@ sha256:be54121da3877f8852c65136d731784f134c4dd9d95071502e80d7be9f99b263
 # Trying to measure non-verity file fails with ENODATA
 ERROR: FS_IOC_MEASURE_VERITY failed on 'SCRATCH_MNT/file.fsv': No data available
 
-# verity on 1-byte file
+# verity on small files
 Files matched
-
-# verity on 4095-byte file
 Files matched
-
-# verity on 4096-byte file
 Files matched
 
-# verity on 100M file (multiple levels in hash tree)
+# verity on 100MB file (multiple levels in hash tree)
 Files matched
 
 # verity on sparse file
Signature · 1 line
2.39.0
author maintainer
#6 lore raw

PATCH v2 6/10 generic/573: support non-4K Merkle tree block size

In reply to Eric Biggers

From: Eric Biggers <[email protected]>

Update generic/573 to not implicitly assume that the Merkle tree block size being used is 4096 bytes.

---
 tests/generic/573 | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
tests/generic/573 +4 -4
index 63c0aef5..ca0f27f9 100755
@@ -36,23 +36,23 @@ fsv_file=$SCRATCH_MNT/file.fsv
 _fsv_scratch_begin_subtest "FS_IOC_ENABLE_VERITY doesn't require root"
 echo foo > $fsv_file
 chmod 666 $fsv_file
-_user_do "$FSVERITY_PROG enable $fsv_file"
+_user_do "$FSVERITY_PROG enable --block-size=$FSV_BLOCK_SIZE $fsv_file"
 
 _fsv_scratch_begin_subtest "FS_IOC_ENABLE_VERITY requires write access"
 echo foo > $fsv_file >> $seqres.full
 chmod 444 $fsv_file
-_user_do "$FSVERITY_PROG enable $fsv_file" |& _filter_scratch
+_user_do "$FSVERITY_PROG enable --block-size=$FSV_BLOCK_SIZE $fsv_file" |& _filter_scratch
 
 _fsv_scratch_begin_subtest "FS_IOC_ENABLE_VERITY requires !append-only"
 echo foo > $fsv_file >> $seqres.full
 $CHATTR_PROG +a $fsv_file
-$FSVERITY_PROG enable $fsv_file |& _filter_scratch
+_fsv_enable $fsv_file |& _filter_scratch
 $CHATTR_PROG -a $fsv_file
 
 _fsv_scratch_begin_subtest "FS_IOC_ENABLE_VERITY requires !immutable"
 echo foo > $fsv_file >> $seqres.full
 $CHATTR_PROG +i $fsv_file
-$FSVERITY_PROG enable $fsv_file |& _filter_scratch
+_fsv_enable $fsv_file |& _filter_scratch
 $CHATTR_PROG -i $fsv_file
 
 _fsv_scratch_begin_subtest "FS_IOC_MEASURE_VERITY doesn't require root"
Signature · 1 line
2.39.0
author maintainer
#7 lore raw

PATCH v2 7/10 generic/577: support non-4K Merkle tree block size

In reply to Eric Biggers

From: Eric Biggers <[email protected]>

Update generic/577 to not implicitly assume that the Merkle tree block size being used is 4096 bytes.

---
 tests/generic/577     | 22 ++++++++++++----------
 tests/generic/577.out | 10 +++++-----
 2 files changed, 17 insertions(+), 15 deletions(-)
tests/generic/577 +12 -10
index 85d680df..bbbfdb0a 100755
@@ -38,6 +38,11 @@ sigfile=$tmp.sig
 otherfile=$SCRATCH_MNT/otherfile
 othersigfile=$tmp.othersig
 
+sign()
+{
+	_fsv_sign "$@" | _filter_scratch | _filter_fsverity_digest
+}
+
 # Setup
 
 echo -e "\n# Generating certificates and private keys"
@@ -57,14 +62,13 @@ _enable_fsverity_signatures
 echo -e "\n# Generating file and signing it for fs-verity"
 head -c 100000 /dev/zero > $fsv_orig_file
 for suffix in '' '.2'; do
-	_fsv_sign $fsv_orig_file $sigfile$suffix --key=$keyfile$suffix \
-		--cert=$certfile$suffix | _filter_scratch
+	sign $fsv_orig_file $sigfile$suffix --key=$keyfile$suffix \
+		--cert=$certfile$suffix
 done
 
 echo -e "\n# Signing a different file for fs-verity"
 head -c 100000 /dev/zero | tr '\0' 'X' > $otherfile
-_fsv_sign $otherfile $othersigfile --key=$keyfile --cert=$certfile \
-	| _filter_scratch
+sign $otherfile $othersigfile --key=$keyfile --cert=$certfile
 
 # Actual tests
 
@@ -106,16 +110,15 @@ _fsv_enable $fsv_file --signature=$tmp.malformed_sig |& _filter_scratch
 
 echo -e "\n# Testing salt"
 reset_fsv_file
-_fsv_sign $fsv_orig_file $sigfile.salted --key=$keyfile --cert=$certfile \
-	--salt=abcd | _filter_scratch
+sign $fsv_orig_file $sigfile.salted --key=$keyfile --cert=$certfile --salt=abcd
 _fsv_enable $fsv_file --signature=$sigfile.salted --salt=abcd
 cmp $fsv_file $fsv_orig_file
 
 echo -e "\n# Testing non-default hash algorithm"
 if _fsv_can_enable $fsv_file --hash-alg=sha512; then
 	reset_fsv_file
-	_fsv_sign $fsv_orig_file $sigfile.sha512 --key=$keyfile \
-		--cert=$certfile --hash-alg=sha512 > /dev/null
+	sign $fsv_orig_file $sigfile.sha512 --key=$keyfile --cert=$certfile \
+		--hash-alg=sha512 > /dev/null
 	_fsv_enable $fsv_file --signature=$sigfile.sha512 --hash-alg=sha512
 	cmp $fsv_file $fsv_orig_file
 fi
@@ -123,8 +126,7 @@ fi
 echo -e "\n# Testing empty file"
 rm -f $fsv_file
 echo -n > $fsv_file
-_fsv_sign $fsv_file $sigfile.emptyfile --key=$keyfile --cert=$certfile | \
-		_filter_scratch
+sign $fsv_file $sigfile.emptyfile --key=$keyfile --cert=$certfile
 _fsv_enable $fsv_file --signature=$sigfile.emptyfile
 
 # success, all done
tests/generic/577.out +5 -5
index 0ca417c4..4f360d57 100644
@@ -9,11 +9,11 @@ QA output created by 577
 # Enabling fs.verity.require_signatures
 
 # Generating file and signing it for fs-verity
-Signed file 'SCRATCH_MNT/file' (sha256:ecabbfca4efd69a721be824965da10d27900b109549f96687b35a4d91d810dac)
-Signed file 'SCRATCH_MNT/file' (sha256:ecabbfca4efd69a721be824965da10d27900b109549f96687b35a4d91d810dac)
+Signed file 'SCRATCH_MNT/file' (sha256:<digest>)
+Signed file 'SCRATCH_MNT/file' (sha256:<digest>)
 
 # Signing a different file for fs-verity
-Signed file 'SCRATCH_MNT/otherfile' (sha256:b2a419c5a8c767a78c6275d6729794bf51e52ddf8713e31d12a93d61d961f49f)
+Signed file 'SCRATCH_MNT/otherfile' (sha256:<digest>)
 
 # Enabling verity with valid signature (should succeed)
 
@@ -33,9 +33,9 @@ ERROR: FS_IOC_ENABLE_VERITY failed on 'SCRATCH_MNT/file.fsv': Key was rejected b
 ERROR: FS_IOC_ENABLE_VERITY failed on 'SCRATCH_MNT/file.fsv': Bad message
 
 # Testing salt
-Signed file 'SCRATCH_MNT/file' (sha256:1cb173bcd199133eb80e9ea4f0f741001b9e73227aa8812685156f2bc8ff45f5)
+Signed file 'SCRATCH_MNT/file' (sha256:<digest>)
 
 # Testing non-default hash algorithm
 
 # Testing empty file
-Signed file 'SCRATCH_MNT/file.fsv' (sha256:3d248ca542a24fc62d1c43b916eae5016878e2533c88238480b26128a1f1af95)
+Signed file 'SCRATCH_MNT/file.fsv' (sha256:<digest>)
Signature · 1 line
2.39.0
author maintainer
#8 lore raw

PATCH v2 8/10 generic/574: test multiple Merkle tree block sizes

In reply to Eric Biggers

From: Eric Biggers <[email protected]>

Instead of only testing 4K Merkle tree blocks, test FSV_BLOCK_SIZE, and also other sizes if they happen to be supported. This allows this test to run in cases where it couldn't before and improves test coverage in cases where it did run before.

Given that the list of Merkle tree block sizes that will actually work is not fixed, this required reworking the test to not rely on the .out file so heavily.

---
 tests/generic/574     | 177 ++++++++++++++++++++++++++----------------
 tests/generic/574.out |  83 ++------------------
 2 files changed, 114 insertions(+), 146 deletions(-)
tests/generic/574 +109 -68
index fd4488c9..8f7923ba 100755
@@ -37,18 +37,19 @@ fsv_file=$SCRATCH_MNT/file.fsv
 
 setup_zeroed_file()
 {
-	local len=$1
-	local sparse=$2
+	local block_size=$1
+	local file_len=$2
+	local sparse=$3
 
 	if $sparse; then
-		dd if=/dev/zero of=$fsv_orig_file bs=1 count=0 seek=$len \
+		dd if=/dev/zero of=$fsv_orig_file bs=1 count=0 seek=$file_len \
 			status=none
 	else
-		head -c $len /dev/zero > $fsv_orig_file
+		head -c $file_len /dev/zero > $fsv_orig_file
 	fi
 	cp $fsv_orig_file $fsv_file
-	_fsv_enable $fsv_file
-	md5sum $fsv_file |& _filter_scratch
+	_fsv_enable $fsv_file --block-size=$block_size
+	cmp $fsv_orig_file $fsv_file
 }
 
 filter_sigbus()
@@ -66,63 +67,84 @@ round_up_to_page_boundary()
 
 corruption_test()
 {
-	local file_len=$1
-	local zap_offset=$2
-	local zap_len=$3
-	local is_merkle_tree=${4:-false} # if true, zap tree instead of data
-	local use_sparse_file=${5:-false}
+	local block_size=$1
+	local file_len=$2
+	local zap_offset=$3
+	local zap_len=$4
+	local is_merkle_tree=${5:-false} # if true, zap tree instead of data
+	local use_sparse_file=${6:-false}
 	local page_aligned_eof=$(round_up_to_page_boundary $file_len)
-	local measurement
+
+	local paramstr="block_size=$block_size"
+	paramstr+=", file_len=$file_len"
+	paramstr+=", zap_offset=$zap_offset"
+	paramstr+=", zap_len=$zap_len"
+	paramstr+=", is_merkle_tree=$is_merkle_tree"
+	paramstr+=", use_sparse_file=$use_sparse_file"
 
 	if $is_merkle_tree; then
 		local corrupt_func=_fsv_scratch_corrupt_merkle_tree
 	else
 		local corrupt_func=_fsv_scratch_corrupt_bytes
 	fi
+	local fs_block_size=$(_get_block_size $SCRATCH_MNT)
 
-	local msg="Corruption test:"
-	msg+=" file_len=$file_len"
-	if $use_sparse_file; then
-		msg+=" (sparse)"
-	fi
-	msg+=" zap_offset=$zap_offset"
-	if $is_merkle_tree; then
-		msg+=" (in Merkle tree)"
-	fi
-	msg+=" zap_len=$zap_len"
+	rm -rf "${SCRATCH_MNT:?}"/*
+	setup_zeroed_file $block_size $file_len $use_sparse_file
 
-	_fsv_scratch_begin_subtest "$msg"
-	setup_zeroed_file $file_len $use_sparse_file
-	cmp $fsv_file $fsv_orig_file
-	echo "Corrupting bytes..."
+	# Corrupt part of the file (data or Merkle tree).
 	head -c $zap_len /dev/zero | tr '\0' X \
 		| $corrupt_func $fsv_file $zap_offset
 
-	echo "Validating corruption (reading full file)..."
+	# Reading the full file with buffered I/O should fail.
 	_scratch_cycle_mount
-	md5sum $fsv_file |& _filter_scratch
+	if cat $fsv_file >/dev/null 2>$tmp.out; then
+		echo "Unexpectedly was able to read full file ($paramstr)"
+	elif ! grep -q 'Input/output error' $tmp.out; then
+		echo "Wrong error reading full file ($paramstr):"
+		cat $tmp.out
+	fi
 
-	echo "Validating corruption (direct I/O)..."
+	# Reading the full file with direct I/O should fail.
 	_scratch_cycle_mount
-	dd if=$fsv_file bs=$FSV_BLOCK_SIZE iflag=direct status=none \
-		of=/dev/null |& _filter_scratch
+	if dd if=$fsv_file bs=$fs_block_size iflag=direct status=none \
+		of=/dev/null 2>$tmp.out
+	then
+		echo "Unexpectedly was able to read full file with DIO ($paramstr)"
+	elif ! grep -q 'Input/output error' $tmp.out; then
+		echo "Wrong error reading full file with DIO ($paramstr):"
+		cat $tmp.out
+	fi
 
-	if (( zap_offset < file_len )) && ! $is_merkle_tree; then
-		echo "Validating corruption (reading just corrupted part)..."
-		dd if=$fsv_file bs=1 skip=$zap_offset count=$zap_len \
-			of=/dev/null status=none |& _filter_scratch
+	# Reading just the corrupted part of the file should fail.
+	if ! $is_merkle_tree; then
+		if dd if=$fsv_file bs=1 skip=$zap_offset count=$zap_len \
+			of=/dev/null status=none 2>$tmp.out; then
+			echo "Unexpectedly was able to read corrupted part ($paramstr)"
+		elif ! grep -q 'Input/output error' $tmp.out; then
+			echo "Wrong error reading corrupted part ($paramstr):"
+			cat $tmp.out
+		fi
 	fi
 
-	echo "Validating corruption (reading full file via mmap)..."
+	# Reading the full file via mmap should fail.
 	bash -c "trap '' SIGBUS; $XFS_IO_PROG -r $fsv_file \
 		-c 'mmap -r 0 $page_aligned_eof' \
-		-c 'mread 0 $file_len'" |& filter_sigbus
+		-c 'mread 0 $file_len'" >/dev/null 2>$tmp.out
+	if ! grep -q 'Bus error' $tmp.out; then
+		echo "Didn't see SIGBUS when reading file via mmap"
+		cat $tmp.out
+	fi
 
+	# Reading just the corrupted part via mmap should fail.
 	if ! $is_merkle_tree; then
-		echo "Validating corruption (reading just corrupted part via mmap)..."
 		bash -c "trap '' SIGBUS; $XFS_IO_PROG -r $fsv_file \
 			-c 'mmap -r 0 $page_aligned_eof' \
-			-c 'mread $zap_offset $zap_len'" |& filter_sigbus
+			-c 'mread $zap_offset $zap_len'" >/dev/null 2>$tmp.out
+		if ! grep -q 'Bus error' $tmp.out; then
+			echo "Didn't see SIGBUS when reading corrupted part via mmap"
+			cat $tmp.out
+		fi
 	fi
 }
 
@@ -131,18 +153,18 @@ corruption_test()
 # return zeros in the last block past EOF, regardless of the contents on
 # disk. In the former, corruption should be detected and result in SIGBUS,
 # while in the latter we would expect zeros past EOF, but no error.
-corrupt_eof_block_test() {
-	local file_len=$1
-	local zap_len=$2
+corrupt_eof_block_test()
+{
+	local block_size=$1
+	local file_len=$2
+	local zap_len=$3
 	local page_aligned_eof=$(round_up_to_page_boundary $file_len)
-	_fsv_scratch_begin_subtest "Corruption test: EOF block"
-	setup_zeroed_file $file_len false
-	cmp $fsv_file $fsv_orig_file
-	echo "Corrupting bytes..."
+
+	rm -rf "${SCRATCH_MNT:?}"/*
+	setup_zeroed_file $block_size $file_len false
 	head -c $zap_len /dev/zero | tr '\0' X \
 		| _fsv_scratch_corrupt_bytes $fsv_file $file_len
 
-	echo "Reading eof block via mmap into a temporary file..."
 	bash -c "trap '' SIGBUS; $XFS_IO_PROG -r $fsv_file \
 		-c 'mmap -r 0 $page_aligned_eof' \
 		-c 'mread -v $file_len $zap_len'" \
@@ -153,30 +175,49 @@ corrupt_eof_block_test() {
 		-c "mmap -r 0 $page_aligned_eof" \
 		-c "mread -v $file_len $zap_len" >$tmp.eof_zero_read
 
-	echo "Checking for SIGBUS or zeros..."
-	grep -q -e '^Bus error$' $tmp.eof_block_read \
-		|| diff $tmp.eof_block_read $tmp.eof_zero_read \
-		&& echo "OK"
+	grep -q -e '^Bus error$' $tmp.eof_block_read || \
+		diff $tmp.eof_block_read $tmp.eof_zero_read
 }
 
-# Note: these tests just overwrite some bytes without checking their original
-# values.  Therefore, make sure to overwrite at least 5 or so bytes, to make it
-# nearly guaranteed that there will be a change -- even when the test file is
-# encrypted due to the test_dummy_encryption mount option being specified.
-
-corruption_test 131072 0 5
-corruption_test 131072 4091 5
-corruption_test 131072 65536 65536
-corruption_test 131072 131067 5
-
-corrupt_eof_block_test 130999 72
-
-# Merkle tree corruption.
-corruption_test 200000 100 10 true
+test_block_size()
+{
+	local block_size=$1
+
+	# Note: these tests just overwrite some bytes without checking their
+	# original values.  Therefore, make sure to overwrite at least 5 or so
+	# bytes, to make it nearly guaranteed that there will be a change --
+	# even when the test file is encrypted due to the test_dummy_encryption
+	# mount option being specified.
+	corruption_test $block_size 131072 0 5
+	corruption_test $block_size 131072 4091 5
+	corruption_test $block_size 131072 65536 65536
+	corruption_test $block_size 131072 131067 5
+
+	corrupt_eof_block_test $block_size 130999 72
+
+	# Merkle tree corruption.
+	corruption_test $block_size 200000 100 10 true
+
+	# Sparse file.  Corrupting the Merkle tree should still cause reads to
+	# fail, i.e. the filesystem must verify holes.
+	corruption_test $block_size 200000 100 10 true true
+}
 
-# Sparse file.  Corrupting the Merkle tree should still cause reads to fail,
-# i.e. the filesystem must verify holes.
-corruption_test 200000 100 10 true true
+# Always test FSV_BLOCK_SIZE.  Also test some other block sizes if they happen
+# to be supported.
+_fsv_scratch_begin_subtest "Testing block_size=FSV_BLOCK_SIZE"
+test_block_size $FSV_BLOCK_SIZE
+for block_size in 1024 4096 16384 65536; do
+	_fsv_scratch_begin_subtest "Testing block_size=$block_size if supported"
+	if (( block_size == FSV_BLOCK_SIZE )); then
+		continue # Skip redundant test case.
+	fi
+	if ! _fsv_can_enable $fsv_file --block-size=$block_size; then
+		echo "block_size=$block_size is unsupported" >> $seqres.full
+		continue
+	fi
+	test_block_size $block_size
+done
 
 # success, all done
 status=0
tests/generic/574.out +5 -78

89 lines not on this page · raw message

Signature · 1 line
2.39.0
#9 lore raw

Re: [PATCH v2 08/10] generic/574: test multiple Merkle tree block sizes

Quoted 138 lines · Eric Biggers

From: Eric Biggers <[email protected]>

Instead of only testing 4K Merkle tree blocks, test FSV_BLOCK_SIZE, and also other sizes if they happen to be supported. This allows this test to run in cases where it couldn't before and improves test coverage in cases where it did run before.

Given that the list of Merkle tree block sizes that will actually work is not fixed, this required reworking the test to not rely on the .out file so heavily.

---
 tests/generic/574     | 177 ++++++++++++++++++++++++++----------------
 tests/generic/574.out |  83 ++------------------
 2 files changed, 114 insertions(+), 146 deletions(-)
tests/generic/574 +49 -35
index fd4488c9..8f7923ba 100755
@@ -37,18 +37,19 @@ fsv_file=$SCRATCH_MNT/file.fsv
 
 setup_zeroed_file()
 {
-	local len=$1
-	local sparse=$2
+	local block_size=$1
+	local file_len=$2
+	local sparse=$3
 
 	if $sparse; then
-		dd if=/dev/zero of=$fsv_orig_file bs=1 count=0 seek=$len \
+		dd if=/dev/zero of=$fsv_orig_file bs=1 count=0 seek=$file_len \
 			status=none
 	else
-		head -c $len /dev/zero > $fsv_orig_file
+		head -c $file_len /dev/zero > $fsv_orig_file
 	fi
 	cp $fsv_orig_file $fsv_file
-	_fsv_enable $fsv_file
-	md5sum $fsv_file |& _filter_scratch
+	_fsv_enable $fsv_file --block-size=$block_size
+	cmp $fsv_orig_file $fsv_file
 }
 
 filter_sigbus()
@@ -66,63 +67,84 @@ round_up_to_page_boundary()
 
 corruption_test()
 {
-	local file_len=$1
-	local zap_offset=$2
-	local zap_len=$3
-	local is_merkle_tree=${4:-false} # if true, zap tree instead of data
-	local use_sparse_file=${5:-false}
+	local block_size=$1
+	local file_len=$2
+	local zap_offset=$3
+	local zap_len=$4
+	local is_merkle_tree=${5:-false} # if true, zap tree instead of data
+	local use_sparse_file=${6:-false}
 	local page_aligned_eof=$(round_up_to_page_boundary $file_len)
-	local measurement
+
+	local paramstr="block_size=$block_size"
+	paramstr+=", file_len=$file_len"
+	paramstr+=", zap_offset=$zap_offset"
+	paramstr+=", zap_len=$zap_len"
+	paramstr+=", is_merkle_tree=$is_merkle_tree"
+	paramstr+=", use_sparse_file=$use_sparse_file"
 
 	if $is_merkle_tree; then
 		local corrupt_func=_fsv_scratch_corrupt_merkle_tree
 	else
 		local corrupt_func=_fsv_scratch_corrupt_bytes
 	fi
+	local fs_block_size=$(_get_block_size $SCRATCH_MNT)
 
-	local msg="Corruption test:"
-	msg+=" file_len=$file_len"
-	if $use_sparse_file; then
-		msg+=" (sparse)"
-	fi
-	msg+=" zap_offset=$zap_offset"
-	if $is_merkle_tree; then
-		msg+=" (in Merkle tree)"
-	fi
-	msg+=" zap_len=$zap_len"
+	rm -rf "${SCRATCH_MNT:?}"/*
+	setup_zeroed_file $block_size $file_len $use_sparse_file
 
-	_fsv_scratch_begin_subtest "$msg"
-	setup_zeroed_file $file_len $use_sparse_file
-	cmp $fsv_file $fsv_orig_file
-	echo "Corrupting bytes..."
+	# Corrupt part of the file (data or Merkle tree).
 	head -c $zap_len /dev/zero | tr '\0' X \
 		| $corrupt_func $fsv_file $zap_offset
 
-	echo "Validating corruption (reading full file)..."
+	# Reading the full file with buffered I/O should fail.
 	_scratch_cycle_mount
-	md5sum $fsv_file |& _filter_scratch
+	if cat $fsv_file >/dev/null 2>$tmp.out; then
+		echo "Unexpectedly was able to read full file ($paramstr)"
+	elif ! grep -q 'Input/output error' $tmp.out; then
+		echo "Wrong error reading full file ($paramstr):"
+		cat $tmp.out
+	fi
 
-	echo "Validating corruption (direct I/O)..."
+	# Reading the full file with direct I/O should fail.
 	_scratch_cycle_mount
-	dd if=$fsv_file bs=$FSV_BLOCK_SIZE iflag=direct status=none \
-		of=/dev/null |& _filter_scratch
+	if dd if=$fsv_file bs=$fs_block_size iflag=direct status=none \
+		of=/dev/null 2>$tmp.out
+	then
+		echo "Unexpectedly was able to read full file with DIO ($paramstr)"
+	elif ! grep -q 'Input/output error' $tmp.out; then
+		echo "Wrong error reading full file with DIO ($paramstr):"
+		cat $tmp.out
+	fi
 
-	if (( zap_offset < file_len )) && ! $is_merkle_tree; then
-		echo "Validating corruption (reading just corrupted part)..."
-		dd if=$fsv_file bs=1 skip=$zap_offset count=$zap_len \
-			of=/dev/null status=none |& _filter_scratch
+	# Reading just the corrupted part of the file should fail.
+	if ! $is_merkle_tree; then
+		if dd if=$fsv_file bs=1 skip=$zap_offset count=$zap_len \
+			of=/dev/null status=none 2>$tmp.out; then
+			echo "Unexpectedly was able to read corrupted part ($paramstr)"
+		elif ! grep -q 'Input/output error' $tmp.out; then
+			echo "Wrong error reading corrupted part ($paramstr):"
+			cat $tmp.out
+		fi

tests/generic/574 round_up_to_page_boundary() · line 135

Quoted 10 lines
tests/generic/574 +4 -2
 	fi
 
-	echo "Validating corruption (reading full file via mmap)..."
+	# Reading the full file via mmap should fail.
 	bash -c "trap '' SIGBUS; $XFS_IO_PROG -r $fsv_file \
 		-c 'mmap -r 0 $page_aligned_eof' \
-		-c 'mread 0 $file_len'" |& filter_sigbus
+		-c 'mread 0 $file_len'" >/dev/null 2>$tmp.out
+	if ! grep -q 'Bus error' $tmp.out; then
+		echo "Didn't see SIGBUS when reading file via mmap"

Hmm... will sigbus error really be output to stderr? From a testing, the generic/574 fails as:

# ./check -s simpledev generic/574
SECTION       -- simpledev
FSTYP         -- ext4
PLATFORM      -- Linux/x86_64 xx-xxxxxx-xxx 6.1.0-rc3 #5 SMP PREEMPT_DYNAMIC Tue Nov  1 01:08:52 CST 2022
MKFS_OPTIONS  -- -F /dev/sdb
MOUNT_OPTIONS -- -o acl,user_xattr -o context=system_u:object_r:root_t:s0 /dev/sdb /mnt/scratch

generic/574 - output mismatch (see /root/git/xfstests/results//simpledev/generic/574.out.bad)
--- tests/generic/574.out 2022-12-25 20:02:41.609104749 +0800
+++ /root/git/xfstests/results//simpledev/generic/574.out.bad 2022-12-25 20:21:57.430719504 +0800
@@ -1,6 +1,32 @@
QA output created by 574

# Testing block_size=FSV_BLOCK_SIZE
+/root/git/xfstests/tests/generic/574: line 69: 1949533 Bus error (core dumped) bash -c "trap '' SIGBUS; $XFS_IO_PROG -r $fsv_file -c 'mmap -r 0 $page_aligned_eof' -c 'mread 0 $file_len'" > /dev/null 2> $tmp.out
+Didn't see SIGBUS when reading file via mmap
+/root/git/xfstests/tests/generic/574: line 69: 1949544 Bus error (core dumped) bash -c "trap '' SIGBUS; $XFS_IO_PROG -r $fsv_file -c 'mmap -r 0 $page_aligned_eof' -c 'mread $zap_offset $zap_len'" > /dev/null 2> $tmp.out
+Didn't see SIGBUS when reading corrupted part via mmap
...
(Run 'diff -u /root/git/xfstests/tests/generic/574.out /root/git/xfstests/results//simpledev/generic/574.out.bad' to see the entire diff)
Ran: generic/574
Failures: generic/574
Failed 1 of 1 tests

Thanks,
Zorro

Quoted 212 lines
tests/generic/574 +56 -31
+		cat $tmp.out
+	fi
 
+	# Reading just the corrupted part via mmap should fail.
 	if ! $is_merkle_tree; then
-		echo "Validating corruption (reading just corrupted part via mmap)..."
 		bash -c "trap '' SIGBUS; $XFS_IO_PROG -r $fsv_file \
 			-c 'mmap -r 0 $page_aligned_eof' \
-			-c 'mread $zap_offset $zap_len'" |& filter_sigbus
+			-c 'mread $zap_offset $zap_len'" >/dev/null 2>$tmp.out
+		if ! grep -q 'Bus error' $tmp.out; then
+			echo "Didn't see SIGBUS when reading corrupted part via mmap"
+			cat $tmp.out
+		fi
 	fi
 }
 
@@ -131,18 +153,18 @@ corruption_test()
 # return zeros in the last block past EOF, regardless of the contents on
 # disk. In the former, corruption should be detected and result in SIGBUS,
 # while in the latter we would expect zeros past EOF, but no error.
-corrupt_eof_block_test() {
-	local file_len=$1
-	local zap_len=$2
+corrupt_eof_block_test()
+{
+	local block_size=$1
+	local file_len=$2
+	local zap_len=$3
 	local page_aligned_eof=$(round_up_to_page_boundary $file_len)
-	_fsv_scratch_begin_subtest "Corruption test: EOF block"
-	setup_zeroed_file $file_len false
-	cmp $fsv_file $fsv_orig_file
-	echo "Corrupting bytes..."
+
+	rm -rf "${SCRATCH_MNT:?}"/*
+	setup_zeroed_file $block_size $file_len false
 	head -c $zap_len /dev/zero | tr '\0' X \
 		| _fsv_scratch_corrupt_bytes $fsv_file $file_len
 
-	echo "Reading eof block via mmap into a temporary file..."
 	bash -c "trap '' SIGBUS; $XFS_IO_PROG -r $fsv_file \
 		-c 'mmap -r 0 $page_aligned_eof' \
 		-c 'mread -v $file_len $zap_len'" \
@@ -153,30 +175,49 @@ corrupt_eof_block_test() {
 		-c "mmap -r 0 $page_aligned_eof" \
 		-c "mread -v $file_len $zap_len" >$tmp.eof_zero_read
 
-	echo "Checking for SIGBUS or zeros..."
-	grep -q -e '^Bus error$' $tmp.eof_block_read \
-		|| diff $tmp.eof_block_read $tmp.eof_zero_read \
-		&& echo "OK"
+	grep -q -e '^Bus error$' $tmp.eof_block_read || \
+		diff $tmp.eof_block_read $tmp.eof_zero_read
 }
 
-# Note: these tests just overwrite some bytes without checking their original
-# values.  Therefore, make sure to overwrite at least 5 or so bytes, to make it
-# nearly guaranteed that there will be a change -- even when the test file is
-# encrypted due to the test_dummy_encryption mount option being specified.
-
-corruption_test 131072 0 5
-corruption_test 131072 4091 5
-corruption_test 131072 65536 65536
-corruption_test 131072 131067 5
-
-corrupt_eof_block_test 130999 72
-
-# Merkle tree corruption.
-corruption_test 200000 100 10 true
+test_block_size()
+{
+	local block_size=$1
+
+	# Note: these tests just overwrite some bytes without checking their
+	# original values.  Therefore, make sure to overwrite at least 5 or so
+	# bytes, to make it nearly guaranteed that there will be a change --
+	# even when the test file is encrypted due to the test_dummy_encryption
+	# mount option being specified.
+	corruption_test $block_size 131072 0 5
+	corruption_test $block_size 131072 4091 5
+	corruption_test $block_size 131072 65536 65536
+	corruption_test $block_size 131072 131067 5
+
+	corrupt_eof_block_test $block_size 130999 72
+
+	# Merkle tree corruption.
+	corruption_test $block_size 200000 100 10 true
+
+	# Sparse file.  Corrupting the Merkle tree should still cause reads to
+	# fail, i.e. the filesystem must verify holes.
+	corruption_test $block_size 200000 100 10 true true
+}
 
-# Sparse file.  Corrupting the Merkle tree should still cause reads to fail,
-# i.e. the filesystem must verify holes.
-corruption_test 200000 100 10 true true
+# Always test FSV_BLOCK_SIZE.  Also test some other block sizes if they happen
+# to be supported.
+_fsv_scratch_begin_subtest "Testing block_size=FSV_BLOCK_SIZE"
+test_block_size $FSV_BLOCK_SIZE
+for block_size in 1024 4096 16384 65536; do
+	_fsv_scratch_begin_subtest "Testing block_size=$block_size if supported"
+	if (( block_size == FSV_BLOCK_SIZE )); then
+		continue # Skip redundant test case.
+	fi
+	if ! _fsv_can_enable $fsv_file --block-size=$block_size; then
+		echo "block_size=$block_size is unsupported" >> $seqres.full
+		continue
+	fi
+	test_block_size $block_size
+done
 
 # success, all done
 status=0
tests/generic/574.out +5 -78
index d40d1263..3ed57f1c 100644
@@ -1,84 +1,11 @@
 QA output created by 574
 
-# Corruption test: file_len=131072 zap_offset=0 zap_len=5
-0dfbe8aa4c20b52e1b8bf3cb6cbdf193  SCRATCH_MNT/file.fsv
-Corrupting bytes...
-Validating corruption (reading full file)...
-md5sum: SCRATCH_MNT/file.fsv: Input/output error
-Validating corruption (direct I/O)...
-dd: error reading 'SCRATCH_MNT/file.fsv': Input/output error
-Validating corruption (reading just corrupted part)...
-dd: error reading 'SCRATCH_MNT/file.fsv': Input/output error
-Validating corruption (reading full file via mmap)...
-Bus error
-Validating corruption (reading just corrupted part via mmap)...
-Bus error
+# Testing block_size=FSV_BLOCK_SIZE
 
-# Corruption test: file_len=131072 zap_offset=4091 zap_len=5
-0dfbe8aa4c20b52e1b8bf3cb6cbdf193  SCRATCH_MNT/file.fsv
-Corrupting bytes...
-Validating corruption (reading full file)...
-md5sum: SCRATCH_MNT/file.fsv: Input/output error
-Validating corruption (direct I/O)...
-dd: error reading 'SCRATCH_MNT/file.fsv': Input/output error
-Validating corruption (reading just corrupted part)...
-dd: error reading 'SCRATCH_MNT/file.fsv': Input/output error
-Validating corruption (reading full file via mmap)...
-Bus error
-Validating corruption (reading just corrupted part via mmap)...
-Bus error
+# Testing block_size=1024 if supported
 
-# Corruption test: file_len=131072 zap_offset=65536 zap_len=65536
-0dfbe8aa4c20b52e1b8bf3cb6cbdf193  SCRATCH_MNT/file.fsv
-Corrupting bytes...
-Validating corruption (reading full file)...
-md5sum: SCRATCH_MNT/file.fsv: Input/output error
-Validating corruption (direct I/O)...
-dd: error reading 'SCRATCH_MNT/file.fsv': Input/output error
-Validating corruption (reading just corrupted part)...
-dd: error reading 'SCRATCH_MNT/file.fsv': Input/output error
-Validating corruption (reading full file via mmap)...
-Bus error
-Validating corruption (reading just corrupted part via mmap)...
-Bus error
+# Testing block_size=4096 if supported
 
-# Corruption test: file_len=131072 zap_offset=131067 zap_len=5
-0dfbe8aa4c20b52e1b8bf3cb6cbdf193  SCRATCH_MNT/file.fsv
-Corrupting bytes...
-Validating corruption (reading full file)...
-md5sum: SCRATCH_MNT/file.fsv: Input/output error
-Validating corruption (direct I/O)...
-dd: error reading 'SCRATCH_MNT/file.fsv': Input/output error
-Validating corruption (reading just corrupted part)...
-dd: error reading 'SCRATCH_MNT/file.fsv': Input/output error
-Validating corruption (reading full file via mmap)...
-Bus error
-Validating corruption (reading just corrupted part via mmap)...
-Bus error
+# Testing block_size=16384 if supported
 
-# Corruption test: EOF block
-f5cca0d7fbb8b02bc6118a9954d5d306  SCRATCH_MNT/file.fsv
-Corrupting bytes...
-Reading eof block via mmap into a temporary file...
-Checking for SIGBUS or zeros...
-OK
-
-# Corruption test: file_len=200000 zap_offset=100 (in Merkle tree) zap_len=10
-4a1e4325031b13f933ac4f1db9ecb63f  SCRATCH_MNT/file.fsv
-Corrupting bytes...
-Validating corruption (reading full file)...
-md5sum: SCRATCH_MNT/file.fsv: Input/output error
-Validating corruption (direct I/O)...
-dd: error reading 'SCRATCH_MNT/file.fsv': Input/output error
-Validating corruption (reading full file via mmap)...
-Bus error
-
-# Corruption test: file_len=200000 (sparse) zap_offset=100 (in Merkle tree) zap_len=10
-4a1e4325031b13f933ac4f1db9ecb63f  SCRATCH_MNT/file.fsv
-Corrupting bytes...
-Validating corruption (reading full file)...
-md5sum: SCRATCH_MNT/file.fsv: Input/output error
-Validating corruption (direct I/O)...
-dd: error reading 'SCRATCH_MNT/file.fsv': Input/output error
-Validating corruption (reading full file via mmap)...
-Bus error
+# Testing block_size=65536 if supported
Signature · 1 line
2.39.0
author maintainer
#10 lore raw

Re: [PATCH v2 08/10] generic/574: test multiple Merkle tree block sizes

Quoted 24 lines · Zorro Lang

tests/generic/574 round_up_to_page_boundary() · line 135

Quoted 7 lines
tests/generic/574 +4 -1
+	# Reading the full file via mmap should fail.
 	bash -c "trap '' SIGBUS; $XFS_IO_PROG -r $fsv_file \
 		-c 'mmap -r 0 $page_aligned_eof' \
-		-c 'mread 0 $file_len'" |& filter_sigbus
+		-c 'mread 0 $file_len'" >/dev/null 2>$tmp.out
+	if ! grep -q 'Bus error' $tmp.out; then
+		echo "Didn't see SIGBUS when reading file via mmap"

Hmm... will sigbus error really be output to stderr? From a testing, the generic/574 fails as:

# ./check -s simpledev generic/574
SECTION       -- simpledev
FSTYP         -- ext4
PLATFORM      -- Linux/x86_64 xx-xxxxxx-xxx 6.1.0-rc3 #5 SMP PREEMPT_DYNAMIC Tue Nov  1 01:08:52 CST 2022
MKFS_OPTIONS  -- -F /dev/sdb
MOUNT_OPTIONS -- -o acl,user_xattr -o context=system_u:object_r:root_t:s0 /dev/sdb /mnt/scratch

generic/574 - output mismatch (see /root/git/xfstests/results//simpledev/generic/574.out.bad)
--- tests/generic/574.out 2022-12-25 20:02:41.609104749 +0800
+++ /root/git/xfstests/results//simpledev/generic/574.out.bad 2022-12-25 20:21:57.430719504 +0800
@@ -1,6 +1,32 @@
QA output created by 574

Quoted 3 lines

# Testing block_size=FSV_BLOCK_SIZE
+/root/git/xfstests/tests/generic/574: line 69: 1949533 Bus error (core dumped) bash -c "trap '' SIGBUS; $XFS_IO_PROG -r $fsv_file -c 'mmap -r 0 $page_aligned_eof' -c 'mread 0 $file_len'" > /dev/null 2> $tmp.out
+Didn't see SIGBUS when reading file via mmap

This test passes for me both before and after this patch series.

Both before and after, the way this is supposed to work is that in:

bash -c "trap '' SIGBUS; command_that_exits_with_sigbus"

... bash should print "Bus error" to stderr due to 'command_that_exits_with_sigbus'. That "Bus error" is then redirected. Before it was redirected to a pipeline; after it is redirected to a file.

I think what's happening is that the version of bash your system has is not forking before exec'ing 'command_that_exits_with_sigbus'. As a result, "Bus error" is printed by the *parent* bash process instead, skipping any redirection in the shell script.

Apparently skipping fork is a real thing in bash, and different versions of bash have had subtly different conditions for enabling it. So this seems plausible.

Adding an extra command after 'command_that_exits_with_sigbus' should fix this:

bash -c "trap '' SIGBUS; command_that_exits_with_sigbus; true"

The joy of working with a shell scripting system where everyone has different versions of everything installed...

- Eric

maintainer
#11 lore raw

Re: [PATCH v2 08/10] generic/574: test multiple Merkle tree block sizes

Quoted 2 lines · Eric Biggers

The joy of working with a shell scripting system where everyone has different versions of everything installed...

And this is why some large companies are still stuck on Bash v3 because the SRE's are afraid that untold number of shell scripts will break in subtle and entertaining ways, leading to customer outages...

- Ted

#12 lore raw

Re: [PATCH v2 08/10] generic/574: test multiple Merkle tree block sizes

In reply to Eric Biggers
Quoted 44 lines · Eric Biggers
Quoted 24 lines · Zorro Lang

tests/generic/574 round_up_to_page_boundary() · line 135

Quoted 7 lines
tests/generic/574 +4 -1
+	# Reading the full file via mmap should fail.
 	bash -c "trap '' SIGBUS; $XFS_IO_PROG -r $fsv_file \
 		-c 'mmap -r 0 $page_aligned_eof' \
-		-c 'mread 0 $file_len'" |& filter_sigbus
+		-c 'mread 0 $file_len'" >/dev/null 2>$tmp.out
+	if ! grep -q 'Bus error' $tmp.out; then
+		echo "Didn't see SIGBUS when reading file via mmap"

Hmm... will sigbus error really be output to stderr? From a testing, the generic/574 fails as:

# ./check -s simpledev generic/574
SECTION       -- simpledev
FSTYP         -- ext4
PLATFORM      -- Linux/x86_64 xx-xxxxxx-xxx 6.1.0-rc3 #5 SMP PREEMPT_DYNAMIC Tue Nov  1 01:08:52 CST 2022
MKFS_OPTIONS  -- -F /dev/sdb
MOUNT_OPTIONS -- -o acl,user_xattr -o context=system_u:object_r:root_t:s0 /dev/sdb /mnt/scratch

generic/574 - output mismatch (see /root/git/xfstests/results//simpledev/generic/574.out.bad)
--- tests/generic/574.out 2022-12-25 20:02:41.609104749 +0800
+++ /root/git/xfstests/results//simpledev/generic/574.out.bad 2022-12-25 20:21:57.430719504 +0800
@@ -1,6 +1,32 @@
QA output created by 574

Quoted 3 lines

# Testing block_size=FSV_BLOCK_SIZE
+/root/git/xfstests/tests/generic/574: line 69: 1949533 Bus error (core dumped) bash -c "trap '' SIGBUS; $XFS_IO_PROG -r $fsv_file -c 'mmap -r 0 $page_aligned_eof' -c 'mread 0 $file_len'" > /dev/null 2> $tmp.out
+Didn't see SIGBUS when reading file via mmap

This test passes for me both before and after this patch series.

Both before and after, the way this is supposed to work is that in:

bash -c "trap '' SIGBUS; command_that_exits_with_sigbus"

... bash should print "Bus error" to stderr due to 'command_that_exits_with_sigbus'. That "Bus error" is then redirected. Before it was redirected to a pipeline; after it is redirected to a file.

I think what's happening is that the version of bash your system has is not forking before exec'ing 'command_that_exits_with_sigbus'. As a result, "Bus error" is printed by the *parent* bash process instead, skipping any redirection in the shell script.

Quoted 6 lines

Apparently skipping fork is a real thing in bash, and different versions of bash have had subtly different conditions for enabling it. So this seems plausible.

Adding an extra command after 'command_that_exits_with_sigbus' should fix this:

bash -c "trap '' SIGBUS; command_that_exits_with_sigbus; true"

Thanks for this explanation, I think you're right!

I'm not sure if it's a bug of bash. If it's not a bug, I think we can do this change (add a true) to avoid that failure. If it's a bug, hmmm..., I think we'd better to avoid that failure too, due to we don't test for bash :-/

How about your resend this single patch (by version 2.1), to fix this problem. Other patches looks good to me, I'd like to merge this patchset this weekend.

Thanks,
Zorro

Quoted 6 lines

The joy of working with a shell scripting system where everyone has different versions of everything installed...

- Eric

author maintainer
#13 lore raw

Re: [PATCH v2 08/10] generic/574: test multiple Merkle tree block sizes

Quoted 29 lines · Zorro Lang
Quoted 16 lines

This test passes for me both before and after this patch series.

Both before and after, the way this is supposed to work is that in:

bash -c "trap '' SIGBUS; command_that_exits_with_sigbus"

... bash should print "Bus error" to stderr due to 'command_that_exits_with_sigbus'. That "Bus error" is then redirected. Before it was redirected to a pipeline; after it is redirected to a file.

I think what's happening is that the version of bash your system has is not forking before exec'ing 'command_that_exits_with_sigbus'. As a result, "Bus error" is printed by the *parent* bash process instead, skipping any redirection in the shell script.

Quoted 6 lines

Apparently skipping fork is a real thing in bash, and different versions of bash have had subtly different conditions for enabling it. So this seems plausible.

Adding an extra command after 'command_that_exits_with_sigbus' should fix this:

bash -c "trap '' SIGBUS; command_that_exits_with_sigbus; true"

Thanks for this explanation, I think you're right!

I'm not sure if it's a bug of bash. If it's not a bug, I think we can do this change (add a true) to avoid that failure. If it's a bug, hmmm..., I think we'd better to avoid that failure too, due to we don't test for bash :-/

Quoted 5 lines

How about your resend this single patch (by version 2.1), to fix this problem. Other patches looks good to me, I'd like to merge this patchset this weekend.

Thanks,
Zorro

I expect that the bash developers wouldn't consider this to be a bug, since it could only be fixed by removing the "skip fork" optimization entirely.

Anyway, the workaround I suggested is simple enough.

I just resent the whole series, since it's confusing to have new versions of patches within existing series versions. But only this one patch changed.

Thanks!

- Eric

author maintainer
#14 lore raw

PATCH v2 9/10 generic/624: test multiple Merkle tree block sizes

In reply to Eric Biggers

From: Eric Biggers <[email protected]>

Instead of only testing 4K Merkle tree blocks, test FSV_BLOCK_SIZE, and also other sizes if they happen to be supported. This allows this test to run in cases where it couldn't before and improves test coverage in cases where it did run before.

This required reworking the test to compute the expected digests using the 'fsverity digest' command, instead of relying on .out file comparisons. (There isn't much downside to this, since comparison to known-good file digests already happens in generic/575. So if both the kernel and fsverity-utils were to be broken in the same way, generic/575 would detect it. generic/624 serves a different purpose.)

---
 common/verity         |  11 ++++
 tests/generic/624     | 119 ++++++++++++++++++++++++++++++------------
 tests/generic/624.out |  15 ++----
 3 files changed, 101 insertions(+), 44 deletions(-)
common/verity +11 -0
index b88e839b..77c257d3 100644
@@ -263,6 +263,17 @@ _fsv_measure()
         $FSVERITY_PROG measure "$@" | awk '{print $1}'
 }
 
+_fsv_digest()
+{
+	local args=("$@")
+	# If the caller didn't explicitly specify a Merkle tree block size, then
+	# use FSV_BLOCK_SIZE.
+	if ! [[ " $*" =~ " --block-size" ]]; then
+		args+=("--block-size=$FSV_BLOCK_SIZE")
+	fi
+	$FSVERITY_PROG digest "${args[@]}" | awk '{print $1}'
+}
+
 _fsv_sign()
 {
 	local args=("$@")
tests/generic/624 +85 -34

133 lines not on this page · raw message

tests/generic/624.out +5 -10
index 912826d3..0ea19ee5 100644
@@ -1,16 +1,11 @@
 QA output created by 624
 
-# Creating a verity file
-sha256:11e4f886bf2d70a6ef3a8b6ce8e8c62c9e5d3263208b9f120ae46791f124be73
+# Testing block_size=FSV_BLOCK_SIZE
 
-# Dumping Merkle tree
-db88cdad554734cd648a1bfbb5be7f86646c54397847aab0b3f42a28829fed17  -
+# Testing block_size=1024 if supported
 
-# Dumping Merkle tree (in chunks)
-db88cdad554734cd648a1bfbb5be7f86646c54397847aab0b3f42a28829fed17  -
+# Testing block_size=4096 if supported
 
-# Dumping descriptor
-11e4f886bf2d70a6ef3a8b6ce8e8c62c9e5d3263208b9f120ae46791f124be73  -
+# Testing block_size=16384 if supported
 
-# Dumping descriptor (in chunks)
-11e4f886bf2d70a6ef3a8b6ce8e8c62c9e5d3263208b9f120ae46791f124be73  -
+# Testing block_size=65536 if supported
Signature · 1 line
2.39.0
author maintainer
#15 lore raw

PATCH v2 10/10 generic/575: test 1K Merkle tree block size

In reply to Eric Biggers

From: Eric Biggers <[email protected]>

In addition to 4K, test 1K Merkle tree blocks. Also always run this test, regardless of FSV_BLOCK_SIZE, but allow skipping tests of parameters that are unsupported, unless they are the default.

---
 tests/generic/575     | 57 +++++++++++++++++++++++++++++++------------
 tests/generic/575.out |  8 ++++--
 2 files changed, 47 insertions(+), 18 deletions(-)
tests/generic/575 +41 -16
index 0ece8826..344fd2b9 100755
@@ -4,7 +4,7 @@
 #
 # FS QA Test generic/575
 #
-# Test that fs-verity is using the correct measurement values.  This test
+# Test that fs-verity is using the correct file digest values.  This test
 # verifies that fs-verity is doing its Merkle tree-based hashing correctly,
 # i.e. that it hasn't been broken by a change.
 #
@@ -26,9 +26,6 @@ _cleanup()
 # real QA test starts here
 _supported_fs generic
 _require_scratch_verity
-if [ $FSV_BLOCK_SIZE != 4096 ]; then
-	_notrun "4096-byte verity block size not supported on this platform"
-fi
 _disable_fsverity_signatures
 
 _scratch_mkfs_verity &>> $seqres.full
@@ -36,24 +33,42 @@ _scratch_mount
 fsv_orig_file=$SCRATCH_MNT/file
 fsv_file=$SCRATCH_MNT/file.fsv
 
+# Try multiple hash algorithms.
 algs=(sha256 sha512)
 
+# Try multiple Merkle tree block sizes.
+block_sizes=(1024 4096)
+
 # Try files with 0, 1, and multiple Merkle tree levels.
 file_sizes=(0 4096 65536 65536 100000000)
 
 # Try both unsalted and salted, and check that empty salt is the same as no salt
 salts=('' '' '' '--salt=' '--salt=f3c93fa6fb828c0e1587e5714ecf6f56')
 
-# The expected file measurements are here rather than in the expected output
-# file because not all hash algorithms may be available.
-sha256_vals=(
+# The expected file digests are here rather than in the expected output file
+# because the kernel might not support all hash algorithms and block sizes.
+sha256_vals_bsize1024=(
+sha256:f2cca36b9b1b7f07814e4284b10121809133e7cb9c4528c8f6846e85fc624ffa
+sha256:ea08590a4fe9c3d6c9dafe0eedacd9dffff8f24e24f1865ee3af132a495ab087
+sha256:527496288d703686e31092f5cca7e1306b2467f00b247ad01056ee5ec35a4bb9
+sha256:527496288d703686e31092f5cca7e1306b2467f00b247ad01056ee5ec35a4bb9
+sha256:087818b23312acb15dff9ff6e2b4f601406d08bb36013542444cc15248f47016
+)
+sha256_vals_bsize4096=(
 sha256:3d248ca542a24fc62d1c43b916eae5016878e2533c88238480b26128a1f1af95
 sha256:babc284ee4ffe7f449377fbf6692715b43aec7bc39c094a95878904d34bac97e
 sha256:011e3f2b1dc89b75d78cddcc2a1b85cd8a64b2883e5f20f277ae4c0617e0404f
 sha256:011e3f2b1dc89b75d78cddcc2a1b85cd8a64b2883e5f20f277ae4c0617e0404f
 sha256:9d33cab743468fcbe4edab91a275b30dd543c12dd5e6ce6f2f737f66a1558f06
 )
-sha512_vals=(
+sha512_vals_bsize1024=(
+sha512:8451664f25b2ad3f24391280e0c5681cb843389c180baa719f8fdfb063f5ddfa2d1c4433e55e2b6fbb3ba6aa2df8a4f41bf56cb7e0a3b617b6919a42c80f034c
+sha512:ab3c6444ab377bbe54c604c26cad241b146d85dc29727703a0d8134f70a8172fb3fa67d171355106b69cc0a9e7e9debb335f9461b3aba44093914867f7c73233
+sha512:e6a11353c24dd7b4603cb8ffa50a7041dbea7382d4698474ccbc2d8b34f3a83d8bf16df25c64ed31ee27213a8a3cbd001fb1ccde46384c23b81305c2393c1046
+sha512:e6a11353c24dd7b4603cb8ffa50a7041dbea7382d4698474ccbc2d8b34f3a83d8bf16df25c64ed31ee27213a8a3cbd001fb1ccde46384c23b81305c2393c1046
+sha512:517d573bd50d5f3787f5766c2ac60c7af854b0901b69757b4ef8dd70aa6b30fcc10d81629ce923bdd062a01c20fad0f063a081a2f3b0814ac06547b26bedc0d9
+)
+sha512_vals_bsize4096=(
 sha512:ccf9e5aea1c2a64efa2f2354a6024b90dffde6bbc017825045dce374474e13d10adb9dadcc6ca8e17a3c075fbd31336e8f266ae6fa93a6c3bed66f9e784e5abf
 sha512:928922686c4caf32175f5236a7f964e9925d10a74dc6d8344a8bd08b23c228ff5792573987d7895f628f39c4f4ebe39a7367d7aeb16aaa0cd324ac1d53664e61
 sha512:eab7224ce374a0a4babcb2db25e24836247f38b87806ad9be9e5ba4daac2f5b814fc0cbdfd9f1f8499b3c9a6c1b38fe08974cce49883ab4ccd04462fd2f9507f
@@ -61,20 +76,27 @@ sha512:eab7224ce374a0a4babcb2db25e24836247f38b87806ad9be9e5ba4daac2f5b814fc0cbdf
 sha512:f7083a38644880d25539488313e9e5b41a4d431a0e383945129ad2c36e3c1d0f28928a424641bb1363c12b6e770578102566acea73baf1ce8ee15336f5ba2446
 )
 
-test_alg()
+test_alg_with_block_size()
 {
 	local alg=$1
-	local -n vals=${alg}_vals
+	local block_size=$2
+	local -n vals=${alg}_vals_bsize${block_size}
 	local i
 	local file_size
 	local expected actual salt_arg
 
-	_fsv_scratch_begin_subtest "Check for expected measurement values ($alg)"
+	_fsv_scratch_begin_subtest "Testing alg=$alg, block_size=$block_size if supported"
 
-	if ! _fsv_can_enable $fsv_file --hash-alg=$alg; then
-		if [ "$alg" = sha256 ]; then
-			_fail "Something is wrong - sha256 hash should always be available"
+	if ! _fsv_can_enable $fsv_file --hash-alg=$alg --block-size=$block_size
+	then
+		# Since this is after _require_scratch_verity, sha256 with
+		# FSV_BLOCK_SIZE must be supported.
+		if [ "$alg" = "sha256" -a "$block_size" = "$FSV_BLOCK_SIZE" ]
+		then
+			_fail "Failed to enable verity with default params"
 		fi
+		# This combination of parameters is unsupported; skip it.
+		echo "alg=$alg, block_size=$block_size is unsupported" >> $seqres.full
 		return 0
 	fi
 
@@ -85,7 +107,8 @@ test_alg()
 
 		head -c $file_size /dev/zero > $fsv_orig_file
 		cp $fsv_orig_file $fsv_file
-		_fsv_enable --hash-alg=$alg $salt_arg $fsv_file
+		_fsv_enable $fsv_file --hash-alg=$alg --block-size=$block_size \
+			$salt_arg
 		actual=$(_fsv_measure $fsv_file)
 		if [ "$actual" != "$expected" ]; then
 			echo "Mismatch: expected $expected, kernel calculated $actual (file_size=$file_size)"
@@ -96,7 +119,9 @@ test_alg()
 }
 
 for alg in ${algs[@]}; do
-	test_alg $alg
+	for block_size in ${block_sizes[@]}; do
+		test_alg_with_block_size $alg $block_size
+	done
 done
 
 # success, all done
tests/generic/575.out +6 -2
index 77bec43e..5ad70773 100644
@@ -1,5 +1,9 @@
 QA output created by 575
 
-# Check for expected measurement values (sha256)
+# Testing alg=sha256, block_size=1024 if supported
 
-# Check for expected measurement values (sha512)
+# Testing alg=sha256, block_size=4096 if supported
+
+# Testing alg=sha512, block_size=1024 if supported
+
+# Testing alg=sha512, block_size=4096 if supported
Signature · 1 line
2.39.0