Skip to contentSkip to conversation

ASoC: rt711-sdca: add jack detection mode for JD2 100K

PATCH In review [email protected] 2 participants 2 messages Dec 23, 2022 – Dec 27, 2022

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ASoC: rt711-sdca: add jack detection mode for JD2 100K

From: Shuming Fan <[email protected]>

This patch adds another jack detection mode for JD2 with an external resistor of 100k.

---
 sound/soc/codecs/rt711-sdca.c | 15 +++++++++++++++
 sound/soc/codecs/rt711-sdca.h |  8 +++++++-
 2 files changed, 22 insertions(+), 1 deletion(-)
sound/soc/codecs/rt711-sdca.c +15 -0
index b78dd5994edb..7cdf184d380b 100644
@@ -463,6 +463,21 @@ static void rt711_sdca_jack_init(struct rt711_sdca_priv *rt711)
 				RT711_HP_JD_FINAL_RESULT_CTL_JD12,
 				RT711_HP_JD_FINAL_RESULT_CTL_JD12);
 			break;
+		case RT711_JD2_100K:
+			rt711_sdca_index_write(rt711, RT711_VENDOR_REG,
+				RT711_COMBO_JACK_AUTO_CTL3, 0xa47e);
+			rt711_sdca_index_update_bits(rt711, RT711_VENDOR_REG,
+				RT711_JD_CTL1, RT711_JD2_DIGITAL_MODE_SEL,
+				RT711_JD2_DIGITAL_MODE_SEL);
+			rt711_sdca_index_update_bits(rt711, RT711_VENDOR_REG,
+				RT711_JD_CTL2, RT711_JD2_2PORT_200K_DECODE_HP |
+				RT711_JD2_2PORT_100K_DECODE_MASK | RT711_HP_JD_SEL_JD2,
+				RT711_JD2_2PORT_100K_DECODE_HP | RT711_HP_JD_SEL_JD2);
+			rt711_sdca_index_update_bits(rt711, RT711_VENDOR_REG,
+				RT711_CC_DET1,
+				RT711_HP_JD_FINAL_RESULT_CTL_JD12 | RT711_POW_CC1_AGPI,
+				RT711_HP_JD_FINAL_RESULT_CTL_JD12 | RT711_POW_CC1_AGPI_OFF);
+			break;
 		default:
 			dev_warn(rt711->component->dev, "Wrong JD source\n");
 			break;
sound/soc/codecs/rt711-sdca.h +7 -1
index 498ca687c47b..10e3c801b813 100644
@@ -127,12 +127,17 @@ struct sdw_stream_data {
 
 /* jack detect control 2 (0x09)(NID:20h) */
 #define RT711_JD2_2PORT_200K_DECODE_HP (0x1 << 13)
+#define RT711_JD2_2PORT_100K_DECODE_MASK (0x1 << 12)
+#define RT711_JD2_2PORT_100K_DECODE_HP (0x0 << 12)
 #define RT711_HP_JD_SEL_JD1 (0x0 << 1)
 #define RT711_HP_JD_SEL_JD2 (0x1 << 1)
 
 /* CC DET1 (0x11)(NID:20h) */
 #define RT711_HP_JD_FINAL_RESULT_CTL_JD12 (0x1 << 10)
 #define RT711_HP_JD_FINAL_RESULT_CTL_CCDET (0x0 << 10)
+#define RT711_POW_CC1_AGPI (0x1 << 5)
+#define RT711_POW_CC1_AGPI_ON (0x1 << 5)
+#define RT711_POW_CC1_AGPI_OFF (0x0 << 5)
 
 /* Parameter & Verb control (0x1a)(NID:20h) */
 #define RT711_HIDDEN_REG_SW_RESET (0x1 << 14)
@@ -226,7 +231,8 @@ enum {
 enum rt711_sdca_jd_src {
 	RT711_JD_NULL,
 	RT711_JD1,
-	RT711_JD2
+	RT711_JD2,
+	RT711_JD2_100K
 };
 
 enum rt711_sdca_ver {
Signature · 1 line
2.38.1
maintainer
#1 lore raw
Quoted 3 lines · On Fri, 23 Dec 2022 13:58:46 +0800, [email protected] wrote:

This patch adds another jack detection mode for JD2 with an external resistor of 100k.

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: rt711-sdca: add jack detection mode for JD2 100K

      commit: 51ea51b18904cd1a0fb244ce41dfd903c2ada628

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark