Support the required clocks to enable USB on SAM9X60
Subsystems (2)
cover Support the required clocks to enable USB on SAM9X60
This patch series originates from a bigger patch series:
https://lists.denx.de/pipermail/u-boot/2022-December/502865.html
A driver for clock operations on SAM9X60's USB clock has been added as well as its registration on CCF. In order for USB to work properly, the UPLL and USBCK need an initial frequency before probing the OHCI/EHCI driver. Furthermore enable this driver in the defconfigs.
Claudiu Beznea (1):
clk: at91: pmc: export clock setup to pmc
Sergiu Moga (4):
clk: at91: Add support for sam9x60 USB clock
clk: at91: sam9x60: Register the required clocks for USB
clk: at91: sam9x60: Add initial setup of UPLL and USBCK rates
configs: at91: sam9x60: Add required configs for the USB clock
configs/sam9x60_curiosity_mmc_defconfig | 1 + configs/sam9x60ek_mmc_defconfig | 1 + configs/sam9x60ek_nandflash_defconfig | 1 + configs/sam9x60ek_qspiflash_defconfig | 1 + drivers/clk/at91/Kconfig | 7 ++ drivers/clk/at91/Makefile | 1 + drivers/clk/at91/clk-sam9x60-usb.c | 157 ++++++++++++++++++++++++ drivers/clk/at91/pmc.c | 42 +++++++ drivers/clk/at91/pmc.h | 27 ++++ drivers/clk/at91/sam9x60.c | 63 ++++++++++ drivers/clk/at91/sama7g5.c | 48 +------- 11 files changed, 307 insertions(+), 42 deletions(-) create mode 100644 drivers/clk/at91/clk-sam9x60-usb.c
Signature · 1 line
2.34.1
PATCH 1/5 clk: at91: Add support for sam9x60 USB clock
Implement sam9x60 USB clock driver. This clock has three parents: PLLA, UPLL and MAINXTAL. The driver is aware of the three possible parents with the help of the two mux tables provied to the driver during the registration of the clock.
--- drivers/clk/at91/Kconfig | 7 ++ drivers/clk/at91/Makefile | 1 + drivers/clk/at91/clk-sam9x60-usb.c | 157 +++++++++++++++++++++++++++++ drivers/clk/at91/pmc.h | 11 ++ 4 files changed, 176 insertions(+) create mode 100644 drivers/clk/at91/clk-sam9x60-usb.c
drivers/clk/at91/Kconfig +7 -0
@@ -61,3 +61,10 @@ config AT91_SAM9X60_PLL help This option is used to enable the AT91 SAM9X60's PLL clock driver. + +config AT91_SAM9X60_USB + bool "USB Clock support for SAM9X60 SoCs" + depends on CLK_AT91 + help + This option is used to enable the AT91 SAM9X60's USB clock + driver.
drivers/clk/at91/Makefile +1 -0
@@ -9,6 +9,7 @@ obj-y += clk-peripheral.o obj-$(CONFIG_AT91_GENERIC_CLK) += clk-generic.o obj-$(CONFIG_AT91_UTMI) += clk-utmi.o obj-$(CONFIG_AT91_SAM9X60_PLL) += clk-sam9x60-pll.o +obj-$(CONFIG_AT91_SAM9X60_USB) += clk-sam9x60-usb.o obj-$(CONFIG_SAMA7G5) += sama7g5.o obj-$(CONFIG_SAM9X60) += sam9x60.o else
drivers/clk/at91/clk-sam9x60-usb.c new file +157 -0
157 lines not on this page · raw message
drivers/clk/at91/pmc.h +11 -0
@@ -71,6 +71,12 @@ struct clk_pcr_layout {u32 pid_mask; }; +struct clk_usbck_layout { +u32 offset; +u32 usbs_mask; +u32 usbdiv_mask; +}; +extern const struct clk_programmable_layout at91rm9200_programmable_layout;extern const struct clk_programmable_layout at91sam9g45_programmable_layout;extern const struct clk_programmable_layout at91sam9x5_programmable_layout;
@@ -87,6 +93,11 @@ struct clk *at91_clk_sam9x5_main(void __iomem *reg, const char *name, const char * const *parent_names, int num_parents, const u32 *mux_table, int type);struct clk * +sam9x60_clk_register_usb (void __iomem *base,const char *name, +const char *const *parent_names,u8 num_parents, +const struct clk_usbck_layout *usbck_layout, +const u32 *clk_mux_table,const u32 *mux_table,u8 id); +struct clk * sam9x60_clk_register_div_pll(void __iomem *base, const char *name, const char *parent_name, u8 id, const struct clk_pll_characteristics *characteristics,
Signature · 1 line
2.34.1
Re: [PATCH 1/5] clk: at91: Add support for sam9x60 USB clock
Quoted 7 lines · Sergiu Moga
Implement sam9x60 USB clock driver. This clock has three parents: PLLA, UPLL and MAINXTAL. The driver is aware of the three possible parents with the help of the two mux tables provied to the driver during the registration of the clock.
Signed-off-by Sergiu Moga <[email protected]>
Quoted 227 lines
--- drivers/clk/at91/Kconfig | 7 ++ drivers/clk/at91/Makefile | 1 + drivers/clk/at91/clk-sam9x60-usb.c | 157 +++++++++++++++++++++++++++++ drivers/clk/at91/pmc.h | 11 ++ 4 files changed, 176 insertions(+) create mode 100644 drivers/clk/at91/clk-sam9x60-usb.cdrivers/clk/at91/Kconfig +7
-0@@ -61,3 +61,10 @@ config AT91_SAM9X60_PLL help This option is used to enable the AT91 SAM9X60's PLL clock driver. + +config AT91_SAM9X60_USB + bool "USB Clock support for SAM9X60 SoCs" + depends on CLK_AT91 + help + This option is used to enable the AT91 SAM9X60's USB clock + driver.drivers/clk/at91/Makefile +1
-0@@ -9,6 +9,7 @@ obj-y += clk-peripheral.o obj-$(CONFIG_AT91_GENERIC_CLK) += clk-generic.o obj-$(CONFIG_AT91_UTMI) += clk-utmi.o obj-$(CONFIG_AT91_SAM9X60_PLL) += clk-sam9x60-pll.o +obj-$(CONFIG_AT91_SAM9X60_USB) += clk-sam9x60-usb.o obj-$(CONFIG_SAMA7G5) += sama7g5.o obj-$(CONFIG_SAM9X60) += sam9x60.o elsedrivers/clk/at91/clk-sam9x60-usb.c new file +157
-0@@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* SAM9X60's USB Clock support. +* +* Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries +* +* Author: Sergiu Moga <[email protected]> +*/ + +#include <clk-uclass.h> +#include <dm.h> +#include <linux/clk-provider.h> + +#include "pmc.h" + +#define UBOOT_DM_CLK_AT91_SAM9X60_USB "at91-sam9x60-usb-clk" + +struct sam9x60_usb { +const struct clk_usbck_layout *layout; +void __iomem *base; +struct clk clk; +const u32 *clk_mux_table; +const u32 *mux_table; +const char *const *parent_names; +u32 num_parents; +u8 id; +}; + +#define to_sam9x60_usb (_clk) container_of(_clk, struct sam9x60_usb, clk) +#define USB_MAX_DIV 15 + +static int sam9x60_usb_clk_set_parent (struct clk *clk,struct clk *parent) +{ +struct sam9x60_usb *usb =to_sam9x60_usb (clk); +int index; +u32 val; + + index =at91_clk_mux_val_to_index (usb->clk_mux_table, usb->num_parents, + parent->id); +if (index <0 ) +return index; + + index =at91_clk_mux_index_to_val (usb->mux_table, usb->num_parents, + index); +if (index <0 ) +return index; + +pmc_read (usb->base, usb->layout->offset, &val); + val &= ~usb->layout->usbs_mask; + val |= index << (ffs (usb->layout->usbs_mask -1 )); +pmc_write (usb->base, usb->layout->offset, val); + +return 0 ; +} + +static ulong sam9x60_usb_clk_get_rate (struct clk *clk) +{ +struct sam9x60_usb *usb =to_sam9x60_usb (clk); +ulong parent_rate =clk_get_parent_rate (clk); +u32 val, usbdiv; + +if (!parent_rate) +return 0 ; + +pmc_read (usb->base, usb->layout->offset, &val); + usbdiv = (val & usb->layout->usbdiv_mask) >> + (ffs (usb->layout->usbdiv_mask) -1 ); +return parent_rate / (usbdiv +1 ); +} + +static ulong sam9x60_usb_clk_set_rate (struct clk *clk,ulong rate) +{ +struct sam9x60_usb *usb =to_sam9x60_usb (clk); +ulong parent_rate =clk_get_parent_rate (clk); +u32 usbdiv, val; + +if (!parent_rate) +return 0 ; + + usbdiv =DIV_ROUND_CLOSEST (parent_rate, rate); +if (usbdiv >USB_MAX_DIV +1 || !usbdiv) +return 0 ; + +pmc_read (usb->base, usb->layout->offset, &val); + val &= usb->layout->usbdiv_mask; + val |= (usbdiv -1 ) << (ffs (usb->layout->usbdiv_mask) -1 ); +pmc_write (usb->base, usb->layout->offset, val); + +return parent_rate / usbdiv; +} + +static const struct clk_ops sam9x60_usb_ops = { + .set_parent = sam9x60_usb_clk_set_parent, + .set_rate = sam9x60_usb_clk_set_rate, + .get_rate = sam9x60_usb_clk_get_rate, +}; + +struct clk * +sam9x60_clk_register_usb (void __iomem *base,const char *name, +const char *const *parent_names,u8 num_parents, +const struct clk_usbck_layout *usbck_layout, +const u32 *clk_mux_table,const u32 *mux_table,u8 id) +{ +struct sam9x60_usb *usb; +struct clk *clk; +int ret, index; +u32 val; + +if (!base || !name || !parent_names || !num_parents || + !clk_mux_table || !mux_table) +return ERR_PTR (-EINVAL ); + + usb =kzalloc (sizeof (*usb),GFP_KERNEL ); +if (!usb) +return ERR_PTR (-ENOMEM ); + + usb->id = id; + usb->base = base; + usb->layout = usbck_layout; + usb->parent_names = parent_names; + usb->num_parents = num_parents; + usb->clk_mux_table = clk_mux_table; + usb->mux_table = mux_table; + + clk = &usb->clk; + clk->flags =CLK_SET_RATE_GATE |CLK_SET_PARENT_GATE | +CLK_SET_RATE_PARENT ; + +pmc_read (usb->base, usb->layout->offset, &val); + + val = (val & usb->layout->usbs_mask) >> + (ffs (usb->layout->usbs_mask) -1 ); + + index =at91_clk_mux_val_to_index (usb->mux_table, usb->num_parents, + val); + +if (index <0 ) { +kfree (usb); +return ERR_PTR (index); + } + + ret =clk_register (clk,UBOOT_DM_CLK_AT91_SAM9X60_USB , name, + parent_names[index]); +if (ret) { +kfree (usb); + clk =ERR_PTR (ret); + } + +return clk; +} + +U_BOOT_DRIVER (at91_sam9x60_usb_clk) = { + .name =UBOOT_DM_CLK_AT91_SAM9X60_USB , + .id =UCLASS_CLK , + .ops = &sam9x60_usb_ops, + .flags =DM_FLAG_PRE_RELOC , +};drivers/clk/at91/pmc.h +11
-0@@ -71,6 +71,12 @@ struct clk_pcr_layout {u32 pid_mask; }; +struct clk_usbck_layout { +u32 offset; +u32 usbs_mask; +u32 usbdiv_mask; +}; +extern const struct clk_programmable_layout at91rm9200_programmable_layout;extern const struct clk_programmable_layout at91sam9g45_programmable_layout;extern const struct clk_programmable_layout at91sam9x5_programmable_layout;@@ -87,6 +93,11 @@ struct clk *at91_clk_sam9x5_main(void __iomem *reg, const char *name, const char * const *parent_names, int num_parents, const u32 *mux_table, int type);struct clk * +sam9x60_clk_register_usb (void __iomem *base,const char *name, +const char *const *parent_names,u8 num_parents, +const struct clk_usbck_layout *usbck_layout, +const u32 *clk_mux_table,const u32 *mux_table,u8 id); +struct clk * sam9x60_clk_register_div_pll(void __iomem *base, const char *name, const char *parent_name, u8 id, const struct clk_pll_characteristics *characteristics,
PATCH 2/5 clk: at91: sam9x60: Register the required clocks for USB
In reply to Sergiu MogaRegister into DM the clocks required to properly enable USB functionality within the bootloader.
--- drivers/clk/at91/sam9x60.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)
drivers/clk/at91/sam9x60.c +33 -0
@@ -76,6 +76,8 @@ enum pmc_clk_ids {ID_QSPI =18 ,ID_MCK_PRES =19 , +ID_USBCK =20 , +ID_UHPCK =21 , ID_MAX, };
@@ -99,6 +101,7 @@ static const char *clk_names[] = { [ID_PLL_A_DIV] = "plla_divpmcck", [ID_MCK_PRES] = "mck_pres", [ID_MCK_DIV] = "mck_div", + [ID_USBCK] = "usbck", };/* Fractional PLL output range. */
@@ -171,6 +174,13 @@ static const struct clk_pcr_layout pcr_layout = { .pid_mask = GENMASK(6, 0), }; +/* USB clock layout */ +static const struct clk_usbck_layout usbck_layout = { + .offset =0x38 , + .usbs_mask =GENMASK (1 ,0 ), + .usbdiv_mask =GENMASK (11 ,8 ), +}; +/** * PLL clocks description * @n: clock name
@@ -266,6 +276,7 @@ static const struct {u8 cid; } sam9x60_systemck[] = { { .n = "ddrck", .p = "mck_div", .id = 2, .cid = ID_DDR, }, + { .n = "uhpck", .p = "usbck", .id = 6, .cid = ID_UHPCK }, { .n = "pck0", .p = "prog0", .id = 8, .cid = ID_PCK0, }, { .n = "pck1", .p = "prog1", .id = 9, .cid = ID_PCK1, }, { .n = "qspick", .p = "mck_div", .id = 19, .cid = ID_QSPI, },
@@ -543,6 +554,28 @@ static int sam9x60_clk_probe(struct udevice *dev) }clk_dm (AT91_TO_CLK_ID (PMC_TYPE_CORE ,ID_MCK_DIV ), c); +/* Register usbck. */ + p[0 ] = clk_names[ID_PLL_A_DIV ]; + p[1 ] = clk_names[ID_PLL_U_DIV ]; + p[2 ] = clk_names[ID_MAIN_XTAL ]; + m[0 ] =0 ; + m[1 ] =1 ; + m[2 ] =2 ; + cm[0 ] =AT91_TO_CLK_ID (PMC_TYPE_CORE ,ID_PLL_A_DIV ); + cm[1 ] =AT91_TO_CLK_ID (PMC_TYPE_CORE ,ID_PLL_U_DIV ); + cm[2 ] =AT91_TO_CLK_ID (PMC_TYPE_CORE ,ID_MAIN_XTAL ); +prepare_mux_table (clkmuxallocs, clkmuxallocindex, tmpclkmux, cm, +3 , fail); +prepare_mux_table (muxallocs, muxallocindex, tmpmux, m,3 , fail); + c =sam9x60_clk_register_usb (base, clk_names[ID_USBCK ], p,3 , + &usbck_layout, tmpclkmux, tmpmux, +ID_USBCK ); +if (IS_ERR (c)) { + ret =PTR_ERR (c); + goto fail; + } +clk_dm (AT91_TO_CLK_ID (PMC_TYPE_CORE ,ID_USBCK ), c); +/* Register programmable clocks. */ p[0 ] = clk_names[ID_MD_SLCK ]; p[1 ] = clk_names[ID_TD_SLCK ];
Signature · 1 line
2.34.1
Re: [PATCH 2/5] clk: at91: sam9x60: Register the required clocks for USB
Quoted 4 lines · Sergiu Moga
Register into DM the clocks required to properly enable USB functionality within the bootloader.
Signed-off-by Sergiu Moga <[email protected]>
Quoted 76 lines
--- drivers/clk/at91/sam9x60.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)drivers/clk/at91/sam9x60.c +33
-0@@ -76,6 +76,8 @@ enum pmc_clk_ids {ID_QSPI =18 ,ID_MCK_PRES =19 , +ID_USBCK =20 , +ID_UHPCK =21 , ID_MAX, };@@ -99,6 +101,7 @@ static const char *clk_names[] = { [ID_PLL_A_DIV] = "plla_divpmcck", [ID_MCK_PRES] = "mck_pres", [ID_MCK_DIV] = "mck_div", + [ID_USBCK] = "usbck", };/* Fractional PLL output range. */ @@ -171,6 +174,13 @@ static const struct clk_pcr_layout pcr_layout = { .pid_mask = GENMASK(6, 0), }; +/* USB clock layout */ +static const struct clk_usbck_layout usbck_layout = { + .offset =0x38 , + .usbs_mask =GENMASK (1 ,0 ), + .usbdiv_mask =GENMASK (11 ,8 ), +}; +/** * PLL clocks description * @n: clock name @@ -266,6 +276,7 @@ static const struct {u8 cid; } sam9x60_systemck[] = { { .n = "ddrck", .p = "mck_div", .id = 2, .cid = ID_DDR, }, + { .n = "uhpck", .p = "usbck", .id = 6, .cid = ID_UHPCK }, { .n = "pck0", .p = "prog0", .id = 8, .cid = ID_PCK0, }, { .n = "pck1", .p = "prog1", .id = 9, .cid = ID_PCK1, }, { .n = "qspick", .p = "mck_div", .id = 19, .cid = ID_QSPI, },@@ -543,6 +554,28 @@ static int sam9x60_clk_probe(struct udevice *dev) }clk_dm (AT91_TO_CLK_ID (PMC_TYPE_CORE ,ID_MCK_DIV ), c); +/* Register usbck. */ + p[0 ] = clk_names[ID_PLL_A_DIV ]; + p[1 ] = clk_names[ID_PLL_U_DIV ]; + p[2 ] = clk_names[ID_MAIN_XTAL ]; + m[0 ] =0 ; + m[1 ] =1 ; + m[2 ] =2 ; + cm[0 ] =AT91_TO_CLK_ID (PMC_TYPE_CORE ,ID_PLL_A_DIV ); + cm[1 ] =AT91_TO_CLK_ID (PMC_TYPE_CORE ,ID_PLL_U_DIV ); + cm[2 ] =AT91_TO_CLK_ID (PMC_TYPE_CORE ,ID_MAIN_XTAL ); +prepare_mux_table (clkmuxallocs, clkmuxallocindex, tmpclkmux, cm, +3 , fail); +prepare_mux_table (muxallocs, muxallocindex, tmpmux, m,3 , fail); + c =sam9x60_clk_register_usb (base, clk_names[ID_USBCK ], p,3 , + &usbck_layout, tmpclkmux, tmpmux, +ID_USBCK ); +if (IS_ERR (c)) { + ret =PTR_ERR (c); + goto fail; + } +clk_dm (AT91_TO_CLK_ID (PMC_TYPE_CORE ,ID_USBCK ), c); +/* Register programmable clocks. */ p[0 ] = clk_names[ID_MD_SLCK ]; p[1 ] = clk_names[ID_TD_SLCK ];
PATCH 3/5 clk: at91: pmc: export clock setup to pmc
In reply to Sergiu MogaFrom: Claudiu Beznea <[email protected]>
Clock setup was intended for setting clocks at boot time on SAMA7G5, e.g. for root clocks like PLLs, that were used to feed IPs needed alive in u-boot (e.g. Ethernet clock feed by a PLL). Export this functionality to all at91 clocks as it may be necessary on other SoCs.
--- drivers/clk/at91/pmc.c | 42 +++++++++++++++++++++++++++++++++ drivers/clk/at91/pmc.h | 16 +++++++++++++ drivers/clk/at91/sama7g5.c | 48 +++++--------------------------------- 3 files changed, 64 insertions(+), 42 deletions(-)
drivers/clk/at91/pmc.c +42 -0
@@ -120,3 +120,45 @@ int at91_clk_mux_index_to_val(const u32 *table, u32 num_parents, u32 index)return table[index]; } + +int at91_clk_setup (const struct pmc_clk_setup *setup,int size) +{ +struct clk *c, *parent; +int i, ret; + +if (!size) +return 0 ; + +if (!setup) +return -EINVAL ; + +for (i =0 ; i < size; i++) { + ret =clk_get_by_id (setup[i].cid, &c); +if (ret) +return ret; + +if (setup[i].pid) { + ret =clk_get_by_id (setup[i].pid, &parent); +if (ret) +return ret; + + ret =clk_set_parent (c, parent); +if (ret) +return ret; + +if (setup[i].prate) { + ret =clk_set_rate (parent, setup[i].prate); +if (ret <0 ) +return ret; + } + } + +if (setup[i].rate) { + ret =clk_set_rate (c, setup[i].rate); +if (ret <0 ) +return ret; + } + } + +return 0 ; +}
drivers/clk/at91/pmc.h +16 -0
@@ -77,6 +77,20 @@ struct clk_usbck_layout {u32 usbdiv_mask; }; +/** +* Clock setup description +* @cid: clock id corresponding to clock subsystem +* @pid: parent clock id corresponding to clock subsystem +* @rate: clock rate +* @prate: parent rate +*/ +struct pmc_clk_setup { +unsigned int cid; +unsigned int pid; +unsigned long rate; +unsigned long prate; +}; +extern const struct clk_programmable_layout at91rm9200_programmable_layout;extern const struct clk_programmable_layout at91sam9g45_programmable_layout;extern const struct clk_programmable_layout at91sam9x5_programmable_layout;
@@ -160,4 +174,6 @@ void pmc_write(void __iomem *base, unsigned int off, unsigned int val);void pmc_update_bits (void __iomem *base,unsigned int off,unsigned int mask,unsigned int bits); +int at91_clk_setup (const struct pmc_clk_setup *setup,int size); +#endif
drivers/clk/at91/sama7g5.c +6 -42
66 lines not on this page · raw message
Signature · 1 line
2.34.1
PATCH 4/5 clk: at91: sam9x60: Add initial setup of UPLL and USBCK rates
In reply to Sergiu MogaIn order for some of the functionalities, such as the USB clocks, to work properly we need some clocks to be properly initialised at the very beginning of booting.
--- drivers/clk/at91/sam9x60.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+)
drivers/clk/at91/sam9x60.c +30 -0
@@ -378,6 +378,31 @@ static const struct { { .n = "dbgu_gclk", .id = 47, }, }; +/** +* Clock setup description +* @cid: clock id corresponding to clock subsystem +* @pid: parent clock id corresponding to clock subsystem +* @rate: clock rate +* @prate: parent rate +*/ +static const struct pmc_clk_setup sam9x60_clk_setup[] = { + { + .cid =AT91_TO_CLK_ID (PMC_TYPE_CORE ,ID_PLL_U_FRAC ), + .rate =960000000 , + }, + + { + .cid =AT91_TO_CLK_ID (PMC_TYPE_CORE ,ID_PLL_U_DIV ), + .rate =480000000 , + }, + + { + .cid =AT91_TO_CLK_ID (PMC_TYPE_CORE ,ID_USBCK ), + .pid =AT91_TO_CLK_ID (PMC_TYPE_CORE ,ID_PLL_U_DIV ), + .rate =48000000 , + }, +}; +#define prepare_mux_table (_allocs, _index, _dst, _src, _num, _label) \ do { \ int _i; \
@@ -668,6 +693,11 @@ static int sam9x60_clk_probe(struct udevice *dev)clk_dm (AT91_TO_CLK_ID (PMC_TYPE_GCK , sam9x60_gck[i].id), c); } +/* Setup clocks. */ + ret =at91_clk_setup (sam9x60_clk_setup,ARRAY_SIZE (sam9x60_clk_setup)); +if (ret) + goto fail; +return 0 ; fail:
Signature · 1 line
2.34.1
Re: [PATCH 4/5] clk: at91: sam9x60: Add initial setup of UPLL and USBCK rates
Quoted 5 lines · Sergiu Moga
In order for some of the functionalities, such as the USB clocks, to work properly we need some clocks to be properly initialised at the very beginning of booting.
Signed-off-by Sergiu Moga <[email protected]>
Quoted 52 lines
--- drivers/clk/at91/sam9x60.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+)drivers/clk/at91/sam9x60.c +30
-0@@ -378,6 +378,31 @@ static const struct { { .n = "dbgu_gclk", .id = 47, }, }; +/** +* Clock setup description +* @cid: clock id corresponding to clock subsystem +* @pid: parent clock id corresponding to clock subsystem +* @rate: clock rate +* @prate: parent rate +*/ +static const struct pmc_clk_setup sam9x60_clk_setup[] = { + { + .cid =AT91_TO_CLK_ID (PMC_TYPE_CORE ,ID_PLL_U_FRAC ), + .rate =960000000 , + }, + + { + .cid =AT91_TO_CLK_ID (PMC_TYPE_CORE ,ID_PLL_U_DIV ), + .rate =480000000 , + }, + + { + .cid =AT91_TO_CLK_ID (PMC_TYPE_CORE ,ID_USBCK ), + .pid =AT91_TO_CLK_ID (PMC_TYPE_CORE ,ID_PLL_U_DIV ), + .rate =48000000 , + }, +}; +#define prepare_mux_table (_allocs, _index, _dst, _src, _num, _label) \ do { \ int _i; \@@ -668,6 +693,11 @@ static int sam9x60_clk_probe(struct udevice *dev)clk_dm (AT91_TO_CLK_ID (PMC_TYPE_GCK , sam9x60_gck[i].id), c); } +/* Setup clocks. */ + ret =at91_clk_setup (sam9x60_clk_setup,ARRAY_SIZE (sam9x60_clk_setup)); +if (ret) + goto fail; +return 0 ; fail:
PATCH 5/5 configs: at91: sam9x60: Add required configs for the USB clock
In reply to Sergiu MogaAdd the configs required to use the SAM9X60's USB clock.
--- configs/sam9x60_curiosity_mmc_defconfig | 1 + configs/sam9x60ek_mmc_defconfig | 1 + configs/sam9x60ek_nandflash_defconfig | 1 + configs/sam9x60ek_qspiflash_defconfig | 1 + 4 files changed, 4 insertions(+)
configs/sam9x60_curiosity_mmc_defconfig +1 -0
@@ -54,6 +54,7 @@ CONFIG_CLK_CCF=y CONFIG_CLK_AT91=y CONFIG_AT91_GENERIC_CLK=y CONFIG_AT91_SAM9X60_PLL=y +CONFIG_AT91_SAM9X60_USB=y CONFIG_CPU=y CONFIG_AT91_GPIO=y CONFIG_DM_I2C=y
configs/sam9x60ek_mmc_defconfig +1 -0
@@ -59,6 +59,7 @@ CONFIG_CLK_CCF=y CONFIG_CLK_AT91=y CONFIG_AT91_GENERIC_CLK=y CONFIG_AT91_SAM9X60_PLL=y +CONFIG_AT91_SAM9X60_USB=y CONFIG_CPU=y CONFIG_AT91_GPIO=y CONFIG_DM_I2C=y
configs/sam9x60ek_nandflash_defconfig +1 -0
@@ -61,6 +61,7 @@ CONFIG_CLK_CCF=y CONFIG_CLK_AT91=y CONFIG_AT91_GENERIC_CLK=y CONFIG_AT91_SAM9X60_PLL=y +CONFIG_AT91_SAM9X60_USB=y CONFIG_CPU=y CONFIG_AT91_GPIO=y CONFIG_DM_I2C=y
configs/sam9x60ek_qspiflash_defconfig +1 -0
@@ -61,6 +61,7 @@ CONFIG_CLK_CCF=y CONFIG_CLK_AT91=y CONFIG_AT91_GENERIC_CLK=y CONFIG_AT91_SAM9X60_PLL=y +CONFIG_AT91_SAM9X60_USB=y CONFIG_CPU=y CONFIG_AT91_GPIO=y CONFIG_DM_I2C=y
Signature · 1 line
2.34.1
Re: [PATCH 5/5] configs: at91: sam9x60: Add required configs for the USB clock
Quoted 3 lines · Sergiu Moga
Add the configs required to use the SAM9X60's USB clock.
Signed-off-by Sergiu Moga <[email protected]>
Quoted 55 lines
--- configs/sam9x60_curiosity_mmc_defconfig | 1 + configs/sam9x60ek_mmc_defconfig | 1 + configs/sam9x60ek_nandflash_defconfig | 1 + configs/sam9x60ek_qspiflash_defconfig | 1 + 4 files changed, 4 insertions(+)configs/sam9x60_curiosity_mmc_defconfig +1
-0@@ -54,6 +54,7 @@ CONFIG_CLK_CCF=y CONFIG_CLK_AT91=y CONFIG_AT91_GENERIC_CLK=y CONFIG_AT91_SAM9X60_PLL=y +CONFIG_AT91_SAM9X60_USB=y CONFIG_CPU=y CONFIG_AT91_GPIO=y CONFIG_DM_I2C=yconfigs/sam9x60ek_mmc_defconfig +1
-0@@ -59,6 +59,7 @@ CONFIG_CLK_CCF=y CONFIG_CLK_AT91=y CONFIG_AT91_GENERIC_CLK=y CONFIG_AT91_SAM9X60_PLL=y +CONFIG_AT91_SAM9X60_USB=y CONFIG_CPU=y CONFIG_AT91_GPIO=y CONFIG_DM_I2C=yconfigs/sam9x60ek_nandflash_defconfig +1
-0@@ -61,6 +61,7 @@ CONFIG_CLK_CCF=y CONFIG_CLK_AT91=y CONFIG_AT91_GENERIC_CLK=y CONFIG_AT91_SAM9X60_PLL=y +CONFIG_AT91_SAM9X60_USB=y CONFIG_CPU=y CONFIG_AT91_GPIO=y CONFIG_DM_I2C=yconfigs/sam9x60ek_qspiflash_defconfig +1
-0@@ -61,6 +61,7 @@ CONFIG_CLK_CCF=y CONFIG_CLK_AT91=y CONFIG_AT91_GENERIC_CLK=y CONFIG_AT91_SAM9X60_PLL=y +CONFIG_AT91_SAM9X60_USB=y CONFIG_CPU=y CONFIG_AT91_GPIO=y CONFIG_DM_I2C=y
Sean Anderson
AppliedQuoted 9 lines · Sergiu Moga
This patch series originates from a bigger patch series:
https://lists.denx.de/pipermail/u-boot/2022-December/502865.htmlA driver for clock operations on SAM9X60's USB clock has been added as well as its registration on CCF. In order for USB to work properly, the UPLL and USBCK need an initial frequency before probing the OHCI/EHCI driver. Furthermore enable this driver in the defconfigs.
[...]
Applied, thanks!
[1/5] clk: at91: Add support for sam9x60 USB clock
commit: e9a2c657e6ac573386564aacd4836e2a65f4cfd0
[2/5] clk: at91: sam9x60: Register the required clocks for USB
commit: 8b95d78f7727f6da6d518ea92a78f717f5293ac5
[3/5] clk: at91: pmc: export clock setup to pmc
commit: 521548fb920a95ca167722986da0d76609a4a968
[4/5] clk: at91: sam9x60: Add initial setup of UPLL and USBCK rates
commit: 548e4fd59f3ee6e06b1263b446ba11e15a980c7c
[5/5] configs: at91: sam9x60: Add required configs for the USB clock
commit: 96d3bc43d8ec5effbc3f8c1ced83c8e3e6dcbfb8Best regards,
Signature · 1 line
Sean Anderson <[email protected]>
Quoted 29 lines · Sergiu Moga
This patch series originates from a bigger patch series:
https://lists.denx.de/pipermail/u-boot/2022-December/502865.htmlA driver for clock operations on SAM9X60's USB clock has been added as well as its registration on CCF. In order for USB to work properly, the UPLL and USBCK need an initial frequency before probing the OHCI/EHCI driver. Furthermore enable this driver in the defconfigs.
Claudiu Beznea (1):
clk: at91: pmc: export clock setup to pmcSergiu Moga (4):
clk: at91: Add support for sam9x60 USB clock
clk: at91: sam9x60: Register the required clocks for USB
clk: at91: sam9x60: Add initial setup of UPLL and USBCK rates
configs: at91: sam9x60: Add required configs for the USB clockconfigs/sam9x60_curiosity_mmc_defconfig | 1 + configs/sam9x60ek_mmc_defconfig | 1 + configs/sam9x60ek_nandflash_defconfig | 1 + configs/sam9x60ek_qspiflash_defconfig | 1 + drivers/clk/at91/Kconfig | 7 ++ drivers/clk/at91/Makefile | 1 + drivers/clk/at91/clk-sam9x60-usb.c | 157 ++++++++++++++++++++++++ drivers/clk/at91/pmc.c | 42 +++++++ drivers/clk/at91/pmc.h | 27 ++++ drivers/clk/at91/sam9x60.c | 63 ++++++++++ drivers/clk/at91/sama7g5.c | 48 +------- 11 files changed, 307 insertions(+), 42 deletions(-)
Quoted 2 lines
create mode 100644
drivers/clk/at91/clk-sam9x60-usb.c
Failing CI pipeline: https://source.denx.de/u-boot/custodians/u-boot-clk/-/jobs/559107
arm-linux-gnueabi-ld.bfd: drivers/clk/at91/sam9x60.o: in function `sam9x60_clk_probe':drivers/clk/at91/sam9x60.c:595: undefined reference to `sam9x60_clk_register_usb'
--Sean