ARM: dts: imx8mm-venice-gw7901: fix USB2 controller OC polarity
Subsystems (2)
PATCH 1/1 ARM: dts: imx8mm-venice-gw7901: fix USB2 controller OC polarity
The GW7901 has USB2 routed to a USB VBUS supply with over-current protection via an active-low pin. Define the OC pin polarity properly.
Fixes 2b1649a83afc ("arm64: dts: imx: Add i.mx8mm Gateworks gw7901 dts support")
Signed-off-by Tim Harvey <[email protected]>
--- arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts | 1 + 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +1 -0
@@ -759,6 +759,7 @@ &usbotg1 { &usbotg2 { dr_mode = "host"; vbus-supply = <®_usb2_vbus>; + over-current-active-low; status = "okay"; };
Signature · 7 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Shawn Guo
AppliedQuoted 5 lines · Tim Harvey
The GW7901 has USB2 routed to a USB VBUS supply with over-current protection via an active-low pin. Define the OC pin polarity properly.
Fixes 2b1649a83afc ("arm64: dts: imx: Add i.mx8mm Gateworks gw7901 dts support")Signed-off-by Tim Harvey <[email protected]>
Applied, thanks!