Skip to contentSkip to conversation

hwmon: (oxp-sensors) Add AYANEO AIR and AIR Pro

PATCH New Derek J. Clark 1 participant 1 message Dec 29, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v4 1/1 hwmon: (oxp-sensors) Add AYANEO AIR and AIR Pro

Add support for the AYANEO AIR and AYANEO AIR Pro models of handheld devices. These devices use the same EC registers and logic as the One X Player mini AMD. Previous AYANEO models are not supported as they use a different EC and do not have the necessary fan speed write enable and setting registers. The driver is tested on AYANEO AIR while AIR Pro model EC functionality and DMI data were verified using command line tools by another user.

Add:
- AYANEO AIR (AMD 5560U)
- AYANEO AIR Pro (AMD 5560U)
- AYANEO AIR Pro (AMD 5825U)

Fix spelling error (appart -> apart)
---
v4:
Revert delete of ':' from Description: in Documentation Add fix spelling error to commit description. v3:
Bundled all cases that lead to break.
Spelling and grammar fixes.
More verbose description of supported devices. v2:
Fix grammar in commit description
Delete ':' from Description: in Documentation
---

---
 Documentation/hwmon/oxp-sensors.rst | 17 ++++++----
 MAINTAINERS                         |  1 +
 drivers/hwmon/oxp-sensors.c         | 52 ++++++++++++++++++++++++-----
 3 files changed, 55 insertions(+), 15 deletions(-)
Documentation/hwmon/oxp-sensors.rst +11 -6
index 39c588ec5c50..566a8d5bde08 100644
@@ -3,18 +3,21 @@
 Kernel driver oxp-sensors
 =========================
 
-Author:
+Authors:
+    - Derek John Clark <[email protected]>
     - Joaquín Ignacio Aramendía <[email protected]>
 
 Description:
 ------------
 
-One X Player devices from One Netbook provide fan readings and fan control
-through its Embedded Controller.
+Handheld devices from One Netbook and Aya Neo provide fan readings and fan
+control through their embedded controllers.
 
-Currently only supports AMD boards from the One X Player and AOK ZOE lineup.
-Intel boards could be supported if we could figure out the EC registers and
-values to write to since the EC layout and model is different.
+Currently only supports AMD boards from One X Player, AOK ZOE, and some Aya
+Neo devices. One X Player Intel boards could be supported if we could figure
+out the EC registers and values to write to since the EC layout and model is
+different. Aya Neo devices preceding the AIR may not be supportable as the EC
+model is different and do not appear to have manual control capabilities.
 
 Supported devices
 -----------------
@@ -22,6 +25,8 @@ Supported devices
 Currently the driver supports the following handhelds:
 
  - AOK ZOE A1
+ - Aya Neo AIR
+ - Aya Neo AIR Pro
  - OneXPlayer AMD
  - OneXPlayer mini AMD
  - OneXPlayer mini AMD PRO
MAINTAINERS +1 -0
index 90220659206c..8bce95170f12 100644
@@ -15346,6 +15346,7 @@ F:	drivers/mtd/nand/onenand/
 F:	include/linux/mtd/onenand*.h
 
 ONEXPLAYER FAN DRIVER
+M:	Derek John Clark <[email protected]>
 M:	Joaquín Ignacio Aramendía <[email protected]>
 L:	[email protected]
 S:	Maintained
drivers/hwmon/oxp-sensors.c +43 -9

90 lines not on this page · raw message

Signature · 1 line
2.39.0