PowerPC: Update dependencies on *SYS_MPC85XX_NO_RESETVEC
PATCH 1/1 PowerPC: Update dependencies on *SYS_MPC85XX_NO_RESETVEC
In 96699f097a02 ("powerpc: mpc85xx: Use binman to embed dtb inside U-Boot") we introduce CONFIG_MPC85XX_HAVE_RESET_VECTOR and do so via Kconfig. However, much later in de47ff536363 ("Convert CONFIG_SYS_MPC85XX_NO_RESETVEC to Kconfig") I converted the symbol that is the inverse of this to Kconfig. This should have included a dependency on the first symbol as they are logically opposite.
The dependency being missing lead to some platforms being broken at runtime due to discarding the require reset vector.
--- arch/powerpc/cpu/mpc85xx/Kconfig | 6 +++--- configs/P1010RDB-PA_36BIT_NOR_defconfig | 1 - configs/P1010RDB-PA_NOR_defconfig | 1 - configs/P1010RDB-PB_36BIT_NOR_defconfig | 1 - configs/P1010RDB-PB_NOR_defconfig | 1 - configs/P1020RDB-PC_36BIT_defconfig | 1 - configs/P1020RDB-PC_defconfig | 1 - configs/P1020RDB-PD_defconfig | 1 - configs/P2020RDB-PC_36BIT_defconfig | 1 - configs/P2020RDB-PC_defconfig | 1 - 10 files changed, 3 insertions(+), 12 deletions(-)
arch/powerpc/cpu/mpc85xx/Kconfig +3 -3
@@ -1459,14 +1459,14 @@ config SYS_FSL_USB_DUAL_PHY_ENABLE config SYS_MPC85XX_NO_RESETVEC bool "Discard resetvec section and move bootpg section up" - depends on MPC85xx + depends on MPC85xx && !MPC85XX_HAVE_RESET_VECTOR help If this variable is specified, the section .resetvec is not kept and the section .bootpg is placed in the previous 4k of the .text section. config SPL_SYS_MPC85XX_NO_RESETVEC bool "Discard resetvec section and move bootpg section up, in SPL" - depends on MPC85xx && SPL + depends on MPC85xx && SPL && !MPC85XX_HAVE_RESET_VECTOR help If this variable is specified, the section .resetvec is not kept and the section .bootpg is placed in the previous 4k of the .text section,
@@ -1474,7 +1474,7 @@ config SPL_SYS_MPC85XX_NO_RESETVEC config TPL_SYS_MPC85XX_NO_RESETVEC bool "Discard resetvec section and move bootpg section up, in TPL" - depends on MPC85xx && TPL + depends on MPC85xx && TPL && !MPC85XX_HAVE_RESET_VECTOR help If this variable is specified, the section .resetvec is not kept and the section .bootpg is placed in the previous 4k of the .text section,
configs/P1010RDB-PA_36BIT_NOR_defconfig +0 -1
@@ -10,7 +10,6 @@ CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1010RDB_PA=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PHYS_64BIT=y
configs/P1010RDB-PA_NOR_defconfig +0 -1
@@ -10,7 +10,6 @@ CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1010RDB_PA=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432
configs/P1010RDB-PB_36BIT_NOR_defconfig +0 -1
@@ -10,7 +10,6 @@ CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1010RDB_PB=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PHYS_64BIT=y
configs/P1010RDB-PB_NOR_defconfig +0 -1
@@ -10,7 +10,6 @@ CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1010RDB_PB=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432
configs/P1020RDB-PC_36BIT_defconfig +0 -1
@@ -11,7 +11,6 @@ CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1020RDB_PC=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PHYS_64BIT=y
configs/P1020RDB-PC_defconfig +0 -1
@@ -11,7 +11,6 @@ CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1020RDB_PC=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432
configs/P1020RDB-PD_defconfig +0 -1
@@ -11,7 +11,6 @@ CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1020RDB_PD=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432
configs/P2020RDB-PC_36BIT_defconfig +0 -1
@@ -11,7 +11,6 @@ CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P2020RDB=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PHYS_64BIT=y
configs/P2020RDB-PC_defconfig +0 -1
@@ -11,7 +11,6 @@ CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P2020RDB=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432
Signature · 1 line
2.25.1
Quoted 7 lines · On Thursday 29 December 2022 09:50:03 Tom Rini wrote:
In
96699f097a02("powerpc: mpc85xx: Use binman to embed dtb inside U-Boot") we introduceCONFIG_MPC85XX_HAVE_RESET_VECTORand do so viaKconfig. However, much later inde47ff536363("ConvertCONFIG_SYS_MPC85XX_NO_RESETVECtoKconfig") I converted the symbol that is the inverse of this toKconfig. This should have included a dependency on the first symbol as they are logically opposite.
Quoted 6 lines
The dependency being missing lead to some platforms being broken at runtime due to discarding the require reset vector.
Fixes de47ff536363 ("Convert CONFIG_SYS_MPC85XX_NO_RESETVEC to Kconfig")Reported-by Pali Rohár <[email protected]>Signed-off-by Tom Rini <[email protected]>
Together with "PowerPC: Rework PBL location choice" patch, U-Boot can be booted on P2020 based board from FLASH NOR (P2020RDB-PC_defconfig) and also from SD card (P2020RDB-PC_SDCARD_defconfig).
Thanks for this patch!!
Quoted 154 lines
--- arch/powerpc/cpu/mpc85xx/Kconfig | 6 +++--- configs/P1010RDB-PA_36BIT_NOR_defconfig | 1 - configs/P1010RDB-PA_NOR_defconfig | 1 - configs/P1010RDB-PB_36BIT_NOR_defconfig | 1 - configs/P1010RDB-PB_NOR_defconfig | 1 - configs/P1020RDB-PC_36BIT_defconfig | 1 - configs/P1020RDB-PC_defconfig | 1 - configs/P1020RDB-PD_defconfig | 1 - configs/P2020RDB-PC_36BIT_defconfig | 1 - configs/P2020RDB-PC_defconfig | 1 - 10 files changed, 3 insertions(+), 12 deletions(-)arch/powerpc/cpu/mpc85xx/Kconfig +3
-3@@ -1459,14 +1459,14 @@ config SYS_FSL_USB_DUAL_PHY_ENABLE config SYS_MPC85XX_NO_RESETVEC bool "Discard resetvec section and move bootpg section up" - depends on MPC85xx + depends on MPC85xx && !MPC85XX_HAVE_RESET_VECTOR help If this variable is specified, the section .resetvec is not kept and the section .bootpg is placed in the previous 4k of the .text section. config SPL_SYS_MPC85XX_NO_RESETVEC bool "Discard resetvec section and move bootpg section up, in SPL" - depends on MPC85xx && SPL + depends on MPC85xx && SPL && !MPC85XX_HAVE_RESET_VECTOR help If this variable is specified, the section .resetvec is not kept and the section .bootpg is placed in the previous 4k of the .text section,@@ -1474,7 +1474,7 @@ config SPL_SYS_MPC85XX_NO_RESETVEC config TPL_SYS_MPC85XX_NO_RESETVEC bool "Discard resetvec section and move bootpg section up, in TPL" - depends on MPC85xx && TPL + depends on MPC85xx && TPL && !MPC85XX_HAVE_RESET_VECTOR help If this variable is specified, the section .resetvec is not kept and the section .bootpg is placed in the previous 4k of the .text section,configs/P1010RDB-PA_36BIT_NOR_defconfig +0
-1@@ -10,7 +10,6 @@ CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1010RDB_PA=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PHYS_64BIT=yconfigs/P1010RDB-PA_NOR_defconfig +0
-1@@ -10,7 +10,6 @@ CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1010RDB_PA=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432configs/P1010RDB-PB_36BIT_NOR_defconfig +0
-1@@ -10,7 +10,6 @@ CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1010RDB_PB=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PHYS_64BIT=yconfigs/P1010RDB-PB_NOR_defconfig +0
-1@@ -10,7 +10,6 @@ CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1010RDB_PB=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432configs/P1020RDB-PC_36BIT_defconfig +0
-1@@ -11,7 +11,6 @@ CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1020RDB_PC=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PHYS_64BIT=yconfigs/P1020RDB-PC_defconfig +0
-1@@ -11,7 +11,6 @@ CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1020RDB_PC=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432configs/P1020RDB-PD_defconfig +0
-1@@ -11,7 +11,6 @@ CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1020RDB_PD=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432configs/P2020RDB-PC_36BIT_defconfig +0
-1@@ -11,7 +11,6 @@ CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P2020RDB=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PHYS_64BIT=yconfigs/P2020RDB-PC_defconfig +0
-1@@ -11,7 +11,6 @@ CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P2020RDB=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432Signature · 1 line
2.25.1
Quoted 7 lines · Tom Rini
In
96699f097a02("powerpc: mpc85xx: Use binman to embed dtb inside U-Boot") we introduceCONFIG_MPC85XX_HAVE_RESET_VECTORand do so viaKconfig. However, much later inde47ff536363("ConvertCONFIG_SYS_MPC85XX_NO_RESETVECtoKconfig") I converted the symbol that is the inverse of this toKconfig. This should have included a dependency on the first symbol as they are logically opposite.
Quoted 7 lines
The dependency being missing lead to some platforms being broken at runtime due to discarding the require reset vector.
Fixes de47ff536363 ("Convert CONFIG_SYS_MPC85XX_NO_RESETVEC to Kconfig")Reported-by Pali Rohár <[email protected]>Signed-off-by Tom Rini <[email protected]>Tested-by Pali Rohár <[email protected]>
Applied to u-boot/master, thanks!
Signature · 1 line
Tom