imx7d-pico: Fix the name of the u-boot.dtsi file
Subsystems (2)
PATCH 1/1 imx7d-pico: Fix the name of the u-boot.dtsi file
Since commit 2f96d4dd95f8 ("imx7s/d: synchronise device trees with linux") the imx7d-pico board no longer boots.
The reason is that prior to the above commit there was an explicit inclusion of arch/arm/dts/imx7d-pico-u-boot.dtsi inside imx7d-pico.dtsi.
After the syncing with the Linux upstream dtsi, this u-boot.dtsi inclusion is gone and the board fails to boot.
U-Boot uses the imx7d-pico-pi.dtb file, so rename the u-boot.dtsi to imx7d-pico-pi-u-boot.dtsi which gets included automatically by U-Boot standard make logic and makes the board boot again.
---
Hi Tom and Stefano,
Please apply this one for U-Boot 2023.01 to fix a boot regression.
Thanks
.../arm/dts/{imx7d-pico-u-boot.dtsi => imx7d-pico-pi-u-boot.dtsi} | 0
1 file changed, 0 insertions(+), 0 deletions(-)
rename arch/arm/dts/{imx7d-pico-u-boot.dtsi => imx7d-pico-pi-u-boot.dtsi} (100%)arch/arm/dts/imx7d-pico-pi-u-boot.dtsi renamed from arch/arm/dts/imx7d-pico-u-boot.dtsi +0 -0
Signature · 1 line
2.25.1
Quoted 13 lines · Fabio Estevam
Since commit
2f96d4dd95f8("imx7s/d: synchronise device trees with linux") the imx7d-pico board no longer boots.The reason is that prior to the above commit there was an explicit inclusion of
arch/arm/dts/imx7d-pico-u-boot.dtsiinsideimx7d-pico.dtsi.After the syncing with the Linux upstream dtsi, this
u-boot.dtsiinclusion is gone and the board fails to boot.U-Boot uses the imx7d-pico-pi.dtb file, so rename the
u-boot.dtsitoimx7d-pico-pi-u-boot.dtsiwhich gets included automatically by U-Boot standard make logic and makes the board boot again.
Quoted 5 lines
Signed-off-by Fabio Estevam <[email protected]>---
Hi Tom and Stefano,Please apply this one for U-Boot 2023.01 to fix a boot regression.
In my bundle to get before the release.
Signature · 1 line
Tom
Quoted 6 lines · Fabio Estevam
Since commit
2f96d4dd95f8("imx7s/d: synchronise device trees with linux") the imx7d-pico board no longer boots.The reason is that prior to the above commit there was an explicit inclusion of
arch/arm/dts/imx7d-pico-u-boot.dtsiinsideimx7d-pico.dtsi.
Quoted 8 lines
After the syncing with the Linux upstream dtsi, this
u-boot.dtsiinclusion is gone and the board fails to boot.U-Boot uses the imx7d-pico-pi.dtb file, so rename the
u-boot.dtsitoimx7d-pico-pi-u-boot.dtsiwhich gets included automatically by U-Boot standard make logic and makes the board boot again.Signed-off-by Fabio Estevam <[email protected]>
Applied to u-boot/master, thanks!
Signature · 1 line
Tom