arm64: dts: qcom: sm6350: enable IPA
v2 cover arm64: dts: qcom: sm6350: enable IPA
Enable IPA for the SM6350 SoC, which implements IPA v4.7. Enable it on the Fairphone 4, which incorporates IPA definitions used for the SM6350.
Version 2 of this series uses the new "qcom,gsi-loader" property to specify that the AP should load firmware on this platform.
-Alex
Luca Weiss (2):
arm64: dts: qcom: sm6350: add IPA node
arm64: dts: qcom: sm7225-fairphone-fp4: enable IPA
arch/arm64/boot/dts/qcom/sm6350.dtsi | 47 +++++++++++++++++++ .../boot/dts/qcom/sm7225-fairphone-fp4.dts | 7 +++ 2 files changed, 54 insertions(+)
Signature · 1 line
2.34.1
PATCH v2 1/2 arm64: dts: qcom: sm6350: add IPA node
From: Luca Weiss <[email protected]>
IPA is used for mobile data. Add a node describing it.
--- arch/arm64/boot/dts/qcom/sm6350.dtsi | 47 ++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+)
arch/arm64/boot/dts/qcom/sm6350.dtsi +47 -0
@@ -432,7 +432,17 @@ modem_smp2p_out: master-kernel { modem_smp2p_in: slave-kernel { qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; interrupt-controller; #interrupt-cells = <2>; };
@@ -847,6 +857,43 @@ ufs_mem_phy_lanes: phy@1d87400 { }; }; + ipa: ipa@1e40000 { + compatible = "qcom,sm6350-ipa"; + + iommus = <&apps_smmu 0x440 0x0>, + <&apps_smmu 0x442 0x0>; + reg = <0 0x01e40000 0 0x8000>, + <0 0x01e50000 0 0x3000>, + <0 0x01e04000 0 0x23000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&aggre2_noc MASTER_IPA 0 &clk_virt SLAVE_EBI_CH0 0>, + <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_OCIMEM 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_IPA_CFG 0>; + interconnect-names = "memory", "imem", "config"; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>;
Signature · 1 line
2.34.1
PATCH v2 2/2 arm64: dts: qcom: sm7225-fairphone-fp4: enable IPA
In reply to Alex ElderFrom: Luca Weiss <[email protected]>
IPA is used for mobile data. Enable it.
--- arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 7 +++++++ 1 file changed, 7 insertions(+)
arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +7 -0
@@ -362,6 +362,13 @@ haptics@5a { }; }; +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&pil_ipa_fw_mem>; + firmware-name = "qcom/sm7225/fairphone4/ipa_fws.mdt"; + status = "okay"; +}; + &mpss { status = "okay"; firmware-name = "qcom/sm7225/fairphone4/modem.mdt";
Signature · 1 line
2.34.1
Quoted 8 lines · Alex Elder
Enable IPA for the SM6350 SoC, which implements IPA v4.7. Enable it on the Fairphone 4, which incorporates IPA definitions used for the SM6350.
Version 2 of this series uses the new "qcom,gsi-loader" property to specify that the AP should load firmware on this platform.
[...]
Applied, thanks!
[1/2] arm64: dts: qcom: sm6350: add IPA node
commit: aed7154a30239f0275b13d622e1edd9d4d356308
[2/2] arm64: dts: qcom: sm7225-fairphone-fp4: enable IPA
commit: 60bf8740870e0377f29b44593c0bfbab379b4909Best regards,
Signature · 1 line
Bjorn Andersson <[email protected]>