Skip to contentSkip to conversation

tests/qtest: netdev: test stream and dgram backends

PATCH Superseded Laurent Vivier 3 participants 9 messages Jan 5, 2023 – Jan 17, 2023 Arm/Amlogic Meson SoC support

v5 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

PATCH v5 1/1 tests/qtest: netdev: test stream and dgram backends

---

Notes:
v5:
- disable test_stream_fd and test_dgram_fd on windows as socketpair() is not defined.
- enable test_stream_unix_abstract only on linux as "abstract" unix socket parameter is only defined on linux.

v4:
- rework EXPECT_STATE()
- use g_dir_make_tmp()

v3:
- Add "-M none" to avoid error:
"No machine specified, and there is no default"

v2:
- Fix ipv6 free port allocation
- Check for IPv4, IPv6, AF_UNIX
- Use g_mkdtemp() rather than g_file_open_tmp()
- Use socketpair() in test_stream_fd()

v1: compared to v14 of "qapi: net: add unix socket type support to netdev backend":
- use IP addresses 127.0.0.1 and ::1 rather than localhost

 tests/qtest/meson.build     |   2 +
 tests/qtest/netdev-socket.c | 444 ++++++++++++++++++++++++++++++++++++
 2 files changed, 446 insertions(+)
 create mode 100644 tests/qtest/netdev-socket.c
tests/qtest/meson.build +2 -0
index f0ebb5fac603..d752304711e2 100644
@@ -21,6 +21,7 @@ qtests_generic = [
   'test-hmp',
   'qos-test',
   'readconfig-test',
+  'netdev-socket',
 ]
 if config_host.has_key('CONFIG_MODULES')
   qtests_generic += [ 'modules-test' ]
@@ -298,6 +299,7 @@ qtests = {
   'tpm-tis-device-swtpm-test': [io, tpmemu_files, 'tpm-tis-util.c'],
   'tpm-tis-device-test': [io, tpmemu_files, 'tpm-tis-util.c'],
   'vmgenid-test': files('boot-sector.c', 'acpi-utils.c'),
+  'netdev-socket': files('netdev-socket.c', '../unit/socket-helpers.c'),
 }
 
 gvnc = dependency('gvnc-1.0', required: false)
tests/qtest/netdev-socket.c new file +444 -0

444 lines not on this page · raw message

Signature · 1 line
2.39.0
#1 lore raw

ping

Quoted 503 lines · Laurent Vivier

---

Notes:
v5:
- disable test_stream_fd and test_dgram_fd on windows as socketpair() is not defined.
- enable test_stream_unix_abstract only on linux as "abstract" unix socket parameter is only defined on linux.

v4:
- rework EXPECT_STATE()
- use g_dir_make_tmp()

v3:
- Add "-M none" to avoid error:
"No machine specified, and there is no default"

v2:
- Fix ipv6 free port allocation
- Check for IPv4, IPv6, AF_UNIX
- Use g_mkdtemp() rather than g_file_open_tmp()
- Use socketpair() in test_stream_fd()

v1: compared to v14 of "qapi: net: add unix socket type support to netdev backend":
- use IP addresses 127.0.0.1 and ::1 rather than localhost

  tests/qtest/meson.build     |   2 +
  tests/qtest/netdev-socket.c | 444 ++++++++++++++++++++++++++++++++++++
  2 files changed, 446 insertions(+)

create mode 100644 tests/qtest/netdev-socket.c

tests/qtest/meson.build +2 -0
index f0ebb5fac603..d752304711e2 100644
@@ -21,6 +21,7 @@ qtests_generic = [
    'test-hmp',
    'qos-test',
    'readconfig-test',
+  'netdev-socket',
  ]
  if config_host.has_key('CONFIG_MODULES')
    qtests_generic += [ 'modules-test' ]
@@ -298,6 +299,7 @@ qtests = {
    'tpm-tis-device-swtpm-test': [io, tpmemu_files, 'tpm-tis-util.c'],
    'tpm-tis-device-test': [io, tpmemu_files, 'tpm-tis-util.c'],
    'vmgenid-test': files('boot-sector.c', 'acpi-utils.c'),
+  'netdev-socket': files('netdev-socket.c', '../unit/socket-helpers.c'),
  }
 
  gvnc = dependency('gvnc-1.0', required: false)
tests/qtest/netdev-socket.c new file +444 -0
new file mode 100644
index 000000000000..a9db9fa06e79
@@ -0,0 +1,444 @@
+/*
+ * QTest testcase for netdev stream and dgram
+ *
+ * Copyright (c) 2022 Red Hat, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include <glib/gstdio.h>
+#include "../unit/socket-helpers.h"
+#include "libqtest.h"
+
+#define CONNECTION_TIMEOUT    5
+
+#define EXPECT_STATE(q, e, t)                             \
+do {                                                      \
+    char *resp = NULL;                                    \
+    g_test_timer_start();                                 \
+    do {                                                  \
+        g_free(resp);                                     \
+        resp = qtest_hmp(q, "info network");              \
+        if (t) {                                          \
+            strrchr(resp, t)[0] = 0;                      \
+        }                                                 \
+        if (g_str_equal(resp, e)) {                       \
+            break;                                        \
+        }                                                 \
+    } while (g_test_timer_elapsed() < CONNECTION_TIMEOUT); \
+    g_assert_cmpstr(resp, ==, e);                         \
+    g_free(resp);                                         \
+} while (0)
+
+static gchar *tmpdir;
+
+static int inet_get_free_port_socket_ipv4(int sock)
+{
+    struct sockaddr_in addr;
+    socklen_t len;
+
+    memset(&addr, 0, sizeof(addr));
+    addr.sin_family = AF_INET;
+    addr.sin_addr.s_addr = INADDR_ANY;
+    addr.sin_port = 0;
+    if (bind(sock, (struct sockaddr *)&addr, sizeof(addr)) < 0) {
+        return -1;
+    }
+
+    len = sizeof(addr);
+    if (getsockname(sock,  (struct sockaddr *)&addr, &len) < 0) {
+        return -1;
+    }
+
+    return ntohs(addr.sin_port);
+}
+
+static int inet_get_free_port_socket_ipv6(int sock)
+{
+    struct sockaddr_in6 addr;
+    socklen_t len;
+
+    memset(&addr, 0, sizeof(addr));
+    addr.sin6_family = AF_INET6;
+    addr.sin6_addr = in6addr_any;
+    addr.sin6_port = 0;
+    if (bind(sock, (struct sockaddr *)&addr, sizeof(addr)) < 0) {
+        return -1;
+    }
+
+    len = sizeof(addr);
+    if (getsockname(sock,  (struct sockaddr *)&addr, &len) < 0) {
+        return -1;
+    }
+
+    return ntohs(addr.sin6_port);
+}
+
+static int inet_get_free_port_multiple(int nb, int *port, bool ipv6)
+{
+    int sock[nb];
+    int i;
+
+    for (i = 0; i < nb; i++) {
+        sock[i] = socket(ipv6 ? AF_INET6 : AF_INET, SOCK_STREAM, 0);
+        if (sock[i] < 0) {
+            break;
+        }
+        port[i] = ipv6 ? inet_get_free_port_socket_ipv6(sock[i]) :
+                         inet_get_free_port_socket_ipv4(sock[i]);
+        if (port[i] == -1) {
+            break;
+        }
+    }
+
+    nb = i;
+    for (i = 0; i < nb; i++) {
+        closesocket(sock[i]);
+    }
+
+    return nb;
+}
+
+static int inet_get_free_port(bool ipv6)
+{
+    int nb, port;
+
+    nb = inet_get_free_port_multiple(1, &port, ipv6);
+    g_assert_cmpint(nb, ==, 1);
+
+    return port;
+}
+
+static void test_stream_inet_ipv4(void)
+{
+    QTestState *qts0, *qts1;
+    char *expect;
+    int port;
+
+    port = inet_get_free_port(false);
+    qts0 = qtest_initf("-nodefaults -M none "
+                       "-netdev stream,id=st0,server=true,addr.type=inet,"
+                       "addr.ipv4=on,addr.ipv6=off,"
+                       "addr.host=127.0.0.1,addr.port=%d", port);
+
+    EXPECT_STATE(qts0, "st0: index=0,type=stream,\r\n", 0);
+
+    qts1 = qtest_initf("-nodefaults -M none "
+                       "-netdev stream,server=false,id=st0,addr.type=inet,"
+                       "addr.ipv4=on,addr.ipv6=off,"
+                       "addr.host=127.0.0.1,addr.port=%d", port);
+
+    expect = g_strdup_printf("st0: index=0,type=stream,tcp:127.0.0.1:%d\r\n",
+                             port);
+    EXPECT_STATE(qts1, expect, 0);
+    g_free(expect);
+
+    /* the port is unknown, check only the address */
+    EXPECT_STATE(qts0, "st0: index=0,type=stream,tcp:127.0.0.1", ':');
+
+    qtest_quit(qts1);
+    qtest_quit(qts0);
+}
+
+static void test_stream_inet_ipv6(void)
+{
+    QTestState *qts0, *qts1;
+    char *expect;
+    int port;
+
+    port = inet_get_free_port(true);
+    qts0 = qtest_initf("-nodefaults -M none "
+                       "-netdev stream,id=st0,server=true,addr.type=inet,"
+                       "addr.ipv4=off,addr.ipv6=on,"
+                       "addr.host=::1,addr.port=%d", port);
+
+    EXPECT_STATE(qts0, "st0: index=0,type=stream,\r\n", 0);
+
+    qts1 = qtest_initf("-nodefaults -M none "
+                       "-netdev stream,server=false,id=st0,addr.type=inet,"
+                       "addr.ipv4=off,addr.ipv6=on,"
+                       "addr.host=::1,addr.port=%d", port);
+
+    expect = g_strdup_printf("st0: index=0,type=stream,tcp:::1:%d\r\n",
+                             port);
+    EXPECT_STATE(qts1, expect, 0);
+    g_free(expect);
+
+    /* the port is unknown, check only the address */
+    EXPECT_STATE(qts0, "st0: index=0,type=stream,tcp:::1", ':');
+
+    qtest_quit(qts1);
+    qtest_quit(qts0);
+}
+
+static void test_stream_unix(void)
+{
+    QTestState *qts0, *qts1;
+    char *expect;
+    gchar *path;
+
+    path = g_strconcat(tmpdir, "/stream_unix", NULL);
+
+    qts0 = qtest_initf("-nodefaults -M none "
+                       "-netdev stream,id=st0,server=true,"
+                       "addr.type=unix,addr.path=%s,",
+                       path);
+
+    EXPECT_STATE(qts0, "st0: index=0,type=stream,\r\n", 0);
+
+    qts1 = qtest_initf("-nodefaults -M none "
+                       "-netdev stream,id=st0,server=false,"
+                       "addr.type=unix,addr.path=%s",
+                       path);
+
+    expect = g_strdup_printf("st0: index=0,type=stream,unix:%s\r\n", path);
+    EXPECT_STATE(qts1, expect, 0);
+    EXPECT_STATE(qts0, expect, 0);
+    g_free(expect);
+    g_free(path);
+
+    qtest_quit(qts1);
+    qtest_quit(qts0);
+}
+
+#ifdef CONFIG_LINUX
+static void test_stream_unix_abstract(void)
+{
+    QTestState *qts0, *qts1;
+    char *expect;
+    gchar *path;
+
+    path = g_strconcat(tmpdir, "/stream_unix_abstract", NULL);
+
+    qts0 = qtest_initf("-nodefaults -M none "
+                       "-netdev stream,id=st0,server=true,"
+                       "addr.type=unix,addr.path=%s,"
+                       "addr.abstract=on",
+                       path);
+
+    EXPECT_STATE(qts0, "st0: index=0,type=stream,\r\n", 0);
+
+    qts1 = qtest_initf("-nodefaults -M none "
+                       "-netdev stream,id=st0,server=false,"
+                       "addr.type=unix,addr.path=%s,addr.abstract=on",
+                       path);
+
+    expect = g_strdup_printf("st0: index=0,type=stream,unix:%s\r\n", path);
+    EXPECT_STATE(qts1, expect, 0);
+    EXPECT_STATE(qts0, expect, 0);
+    g_free(expect);
+    g_free(path);
+
+    qtest_quit(qts1);
+    qtest_quit(qts0);
+}
+#endif
+
+#ifndef _WIN32
+static void test_stream_fd(void)
+{
+    QTestState *qts0, *qts1;
+    int sock[2];
+    int ret;
+
+    ret = socketpair(AF_LOCAL, SOCK_STREAM, 0, sock);
+    g_assert_true(ret == 0);
+
+    qts0 = qtest_initf("-nodefaults -M none "
+                       "-netdev stream,id=st0,addr.type=fd,addr.str=%d",
+                       sock[0]);
+
+    EXPECT_STATE(qts0, "st0: index=0,type=stream,unix:\r\n", 0);
+
+    qts1 = qtest_initf("-nodefaults -M none "
+                       "-netdev stream,id=st0,addr.type=fd,addr.str=%d",
+                       sock[1]);
+
+    EXPECT_STATE(qts1, "st0: index=0,type=stream,unix:\r\n", 0);
+    EXPECT_STATE(qts0, "st0: index=0,type=stream,unix:\r\n", 0);
+
+    qtest_quit(qts1);
+    qtest_quit(qts0);
+
+    closesocket(sock[0]);
+    closesocket(sock[1]);
+}
+#endif
+
+static void test_dgram_inet(void)
+{
+    QTestState *qts0, *qts1;
+    char *expect;
+    int port[2];
+    int nb;
+
+    nb = inet_get_free_port_multiple(2, port, false);
+    g_assert_cmpint(nb, ==, 2);
+
+    qts0 = qtest_initf("-nodefaults -M none "
+                       "-netdev dgram,id=st0,"
+                       "local.type=inet,local.host=127.0.0.1,local.port=%d,"
+                       "remote.type=inet,remote.host=127.0.0.1,remote.port=%d",
+                        port[0], port[1]);
+
+    expect = g_strdup_printf("st0: index=0,type=dgram,"
+                             "udp=127.0.0.1:%d/127.0.0.1:%d\r\n",
+                             port[0], port[1]);
+    EXPECT_STATE(qts0, expect, 0);
+    g_free(expect);
+
+    qts1 = qtest_initf("-nodefaults -M none "
+                       "-netdev dgram,id=st0,"
+                       "local.type=inet,local.host=127.0.0.1,local.port=%d,"
+                       "remote.type=inet,remote.host=127.0.0.1,remote.port=%d",
+                        port[1], port[0]);
+
+    expect = g_strdup_printf("st0: index=0,type=dgram,"
+                             "udp=127.0.0.1:%d/127.0.0.1:%d\r\n",
+                             port[1], port[0]);
+    EXPECT_STATE(qts1, expect, 0);
+    g_free(expect);
+
+    qtest_quit(qts1);
+    qtest_quit(qts0);
+}
+
+static void test_dgram_mcast(void)
+{
+    QTestState *qts;
+
+    qts = qtest_initf("-nodefaults -M none "
+                      "-netdev dgram,id=st0,"
+                      "remote.type=inet,remote.host=230.0.0.1,remote.port=1234");
+
+    EXPECT_STATE(qts, "st0: index=0,type=dgram,mcast=230.0.0.1:1234\r\n", 0);
+
+    qtest_quit(qts);
+}
+
+static void test_dgram_unix(void)
+{
+    QTestState *qts0, *qts1;
+    char *expect;
+    gchar *path0, *path1;
+
+    path0 = g_strconcat(tmpdir, "/dgram_unix0", NULL);
+    path1 = g_strconcat(tmpdir, "/dgram_unix1", NULL);
+
+    qts0 = qtest_initf("-nodefaults -M none "
+                       "-netdev dgram,id=st0,local.type=unix,local.path=%s,"
+                       "remote.type=unix,remote.path=%s",
+                       path0, path1);
+
+    expect = g_strdup_printf("st0: index=0,type=dgram,udp=%s:%s\r\n",
+                             path0, path1);
+    EXPECT_STATE(qts0, expect, 0);
+    g_free(expect);
+
+    qts1 = qtest_initf("-nodefaults -M none "
+                       "-netdev dgram,id=st0,local.type=unix,local.path=%s,"
+                       "remote.type=unix,remote.path=%s",
+                       path1, path0);
+
+
+    expect = g_strdup_printf("st0: index=0,type=dgram,udp=%s:%s\r\n",
+                             path1, path0);
+    EXPECT_STATE(qts1, expect, 0);
+    g_free(expect);
+
+    unlink(path0);
+    g_free(path0);
+    unlink(path1);
+    g_free(path1);
+
+    qtest_quit(qts1);
+    qtest_quit(qts0);
+}
+
+#ifndef _WIN32
+static void test_dgram_fd(void)
+{
+    QTestState *qts0, *qts1;
+    char *expect;
+    int ret;
+    int sv[2];
+
+    ret = socketpair(PF_UNIX, SOCK_DGRAM, 0, sv);
+    g_assert_cmpint(ret, !=, -1);
+
+    qts0 = qtest_initf("-nodefaults -M none "
+                       "-netdev dgram,id=st0,local.type=fd,local.str=%d",
+                       sv[0]);
+
+    expect = g_strdup_printf("st0: index=0,type=dgram,fd=%d unix\r\n", sv[0]);
+    EXPECT_STATE(qts0, expect, 0);
+    g_free(expect);
+
+    qts1 = qtest_initf("-nodefaults -M none "
+                       "-netdev dgram,id=st0,local.type=fd,local.str=%d",
+                       sv[1]);
+
+
+    expect = g_strdup_printf("st0: index=0,type=dgram,fd=%d unix\r\n", sv[1]);
+    EXPECT_STATE(qts1, expect, 0);
+    g_free(expect);
+
+    qtest_quit(qts1);
+    qtest_quit(qts0);
+
+    closesocket(sv[0]);
+    closesocket(sv[1]);
+}
+#endif
+
+int main(int argc, char **argv)
+{
+    int ret;
+    bool has_ipv4, has_ipv6, has_afunix;
+    g_autoptr(GError) err = NULL;
+
+    g_test_init(&argc, &argv, NULL);
+
+    if (socket_check_protocol_support(&has_ipv4, &has_ipv6) < 0) {
+        g_printerr("socket_check_protocol_support() failed\n");
+        goto end;
+    }
+
+    tmpdir = g_dir_make_tmp("netdev-socket.XXXXXX", &err);
+    if (tmpdir == NULL) {
+        g_error("Can't create temporary directory in %s: %s",
+                g_get_tmp_dir(), err->message);
+    }
+
+    if (has_ipv4) {
+        qtest_add_func("/netdev/stream/inet/ipv4", test_stream_inet_ipv4);
+        qtest_add_func("/netdev/dgram/inet", test_dgram_inet);
+        qtest_add_func("/netdev/dgram/mcast", test_dgram_mcast);
+    }
+    if (has_ipv6) {
+        qtest_add_func("/netdev/stream/inet/ipv6", test_stream_inet_ipv6);
+    }
+
+    socket_check_afunix_support(&has_afunix);
+    if (has_afunix) {
+        qtest_add_func("/netdev/dgram/unix", test_dgram_unix);
+        qtest_add_func("/netdev/stream/unix", test_stream_unix);
+#ifdef CONFIG_LINUX
+        qtest_add_func("/netdev/stream/unix/abstract",
+                       test_stream_unix_abstract);
+#endif
+#ifndef _WIN32
+        qtest_add_func("/netdev/stream/fd", test_stream_fd);
+        qtest_add_func("/netdev/dgram/fd", test_dgram_fd);
+#endif
+    }
+
+end:
+    ret = g_test_run();
+
+    g_rmdir(tmpdir);
+    g_free(tmpdir);
+
+    return ret;
+}
Acked-by
#2 lore raw
Quoted 31 lines · Laurent Vivier

ping

Quoted 28 lines · Laurent Vivier

---

Notes:
     v5:
       - disable test_stream_fd and  test_dgram_fd on windows as socketpair() is not defined.
       - enable test_stream_unix_abstract only on linux as "abstract"
         unix socket parameter is only defined on linux.
     v4:
       - rework EXPECT_STATE()
       - use g_dir_make_tmp()
     v3:
     - Add "-M none" to avoid error:
       "No machine specified, and there is no default"
     v2:
     - Fix ipv6 free port allocation
     - Check for IPv4, IPv6, AF_UNIX
     - Use g_mkdtemp() rather than g_file_open_tmp()
     - Use socketpair() in test_stream_fd()
     v1: compared to v14 of "qapi: net: add unix socket type support to netdev backend":
     - use IP addresses 127.0.0.1 and ::1 rather than localhost

  tests/qtest/meson.build     |   2 + tests/qtest/netdev-socket.c | 444 ++++++++++++++++++++++++++++++++++++

  2 files changed, 446 insertions(+)

  create mode 100644 tests/qtest/netdev-socket.c

I'll queue it for my next pull request (unless someone else wants to take this first)

#3 lore raw
Quoted 28 lines · Thomas Huth
Quoted 27 lines · Laurent Vivier

ping

Quoted 24 lines · Laurent Vivier

---

Notes:
     v5:
       - disable test_stream_fd and  test_dgram_fd on windows as socketpair() is not defined.
       - enable test_stream_unix_abstract only on linux as "abstract"
         unix socket parameter is only defined on linux.
     v4:
       - rework EXPECT_STATE()
       - use g_dir_make_tmp()
     v3:
     - Add "-M none" to avoid error:
       "No machine specified, and there is no default"
     v2:
     - Fix ipv6 free port allocation
     - Check for IPv4, IPv6, AF_UNIX
     - Use g_mkdtemp() rather than g_file_open_tmp()
     - Use socketpair() in test_stream_fd()
     v1: compared to v14 of "qapi: net: add unix socket type support to netdev backend":
     - use IP addresses 127.0.0.1 and ::1 rather than localhost

Quoted 8 lines
Quoted 4 lines
Quoted 4 lines

  tests/qtest/meson.build     |   2 + tests/qtest/netdev-socket.c | 444 ++++++++++++++++++++++++++++++++++++

  2 files changed, 446 insertions(+)

  create mode 100644 tests/qtest/netdev-socket.c

I'll queue it for my next pull request (unless someone else wants to take this first)

Sorry, but I have to unqueue it again. I'm still seeing failures in the Windows Cirrus-CI:

https://cirrus-ci.com/task/5867407370092544

For example:

218/556 qemu:qtest+qtest-aarch64 / qtest-aarch64/netdev-socket ERROR 0.02s exit status 3
------------------------------------- 8< ------------------------------------- stderr:
socket_check_protocol_support() failed

(C:/Users/ContainerAdministrator/AppData/Local/Temp/cirrus-ci-build/build/tests/qtest/netdev-socket.exe:3300): GLib-CRITICAL **: 09:08:00.984: g_utf8_to_utf16: assertion 'str != NULL' failed

(test program exited with status code 3)

No clue where this comes from, though, I don't see a call to g_utf8_to_utf16() in your code?

Thomas

#4 lore raw
Quoted 34 lines · Thomas Huth
Quoted 33 lines · Thomas Huth
Quoted 31 lines · Laurent Vivier

ping

Quoted 28 lines · Laurent Vivier

---

Notes:
     v5:
       - disable test_stream_fd and  test_dgram_fd on windows as socketpair() is not defined.
       - enable test_stream_unix_abstract only on linux as "abstract"
         unix socket parameter is only defined on linux.
     v4:
       - rework EXPECT_STATE()
       - use g_dir_make_tmp()
     v3:
     - Add "-M none" to avoid error:
       "No machine specified, and there is no default"
     v2:
     - Fix ipv6 free port allocation
     - Check for IPv4, IPv6, AF_UNIX
     - Use g_mkdtemp() rather than g_file_open_tmp()
     - Use socketpair() in test_stream_fd()
     v1: compared to v14 of "qapi: net: add unix socket type support to netdev backend":
     - use IP addresses 127.0.0.1 and ::1 rather than localhost

  tests/qtest/meson.build     |   2 + tests/qtest/netdev-socket.c | 444 ++++++++++++++++++++++++++++++++++++

  2 files changed, 446 insertions(+)

  create mode 100644 tests/qtest/netdev-socket.c

Quoted 6 lines
Quoted 3 lines

I'll queue it for my next pull request (unless someone else wants to take this first)

Sorry, but I have to unqueue it again. I'm still seeing failures in the Windows Cirrus-CI:

I'm sorry too :(

Quoted 10 lines

 https://cirrus-ci.com/task/5867407370092544

For example:

218/556 qemu:qtest+qtest-aarch64 / qtest-aarch64/netdev-socket ERROR           0.02s   exit status 3
------------------------------------- 8< ------------------------------------- stderr:
socket_check_protocol_support() failed

Quoted 6 lines

(C:/Users/ContainerAdministrator/AppData/Local/Temp/cirrus-ci-build/build/tests/qtest/netdev-socket.exe:3300): GLib-CRITICAL **: 09:08:00.984: g_utf8_to_utf16: assertion 'str != NULL' failed

(test program exited with status code 3)

No clue where this comes from, though, I don't see a call to g_utf8_to_utf16() in your code?

Could you give the command line to reproduce the problem?

Thanks,
Laurent

Quoted 2 lines

 Thomas

#5 lore raw
Quoted 55 lines · Laurent Vivier
Quoted 34 lines · Thomas Huth
Quoted 33 lines · Thomas Huth
Quoted 31 lines · Laurent Vivier

ping

Quoted 28 lines · Laurent Vivier

---

Notes:
     v5:
       - disable test_stream_fd and  test_dgram_fd on windows as socketpair() is not defined.
       - enable test_stream_unix_abstract only on linux as "abstract"
         unix socket parameter is only defined on linux.
     v4:
       - rework EXPECT_STATE()
       - use g_dir_make_tmp()
     v3:
     - Add "-M none" to avoid error:
       "No machine specified, and there is no default"
     v2:
     - Fix ipv6 free port allocation
     - Check for IPv4, IPv6, AF_UNIX
     - Use g_mkdtemp() rather than g_file_open_tmp()
     - Use socketpair() in test_stream_fd()
     v1: compared to v14 of "qapi: net: add unix socket type support to netdev backend":
     - use IP addresses 127.0.0.1 and ::1 rather than localhost

  tests/qtest/meson.build     |   2 + tests/qtest/netdev-socket.c | 444 ++++++++++++++++++++++++++++++++++++

  2 files changed, 446 insertions(+)

  create mode 100644 tests/qtest/netdev-socket.c

Quoted 6 lines
Quoted 3 lines

I'll queue it for my next pull request (unless someone else wants to take this first)

Sorry, but I have to unqueue it again. I'm still seeing failures in the Windows Cirrus-CI:

I'm sorry too :(

Quoted 11 lines

  https://cirrus-ci.com/task/5867407370092544

For example:

218/556 qemu:qtest+qtest-aarch64 / qtest-aarch64/netdev-socket ERROR           0.02s   exit status 3 ------------------------------------- 8<
-------------------------------------
stderr:
socket_check_protocol_support() failed

Quoted 8 lines
Quoted 6 lines

(C:/Users/ContainerAdministrator/AppData/Local/Temp/cirrus-ci-build/build/tests/qtest/netdev-socket.exe:3300): GLib-CRITICAL **: 09:08:00.984: g_utf8_to_utf16: assertion 'str != NULL' failed

(test program exited with status code 3)

No clue where this comes from, though, I don't see a call to g_utf8_to_utf16() in your code?

Could you give the command line to reproduce the problem?

This was running in the Cirrus-CI via the .cirrus.yml file. You need a git repo on github for this and enable the Cirrus-CI for it, then it should trigger automatically when you push a new branch to the repository.

Thomas

#6 lore raw
In reply to Thomas Huth
Quoted 50 lines · Thomas Huth
Quoted 28 lines · Thomas Huth
Quoted 27 lines · Laurent Vivier

ping

Quoted 24 lines · Laurent Vivier

---

Notes:
     v5:
       - disable test_stream_fd and  test_dgram_fd on windows as socketpair() is not defined.
       - enable test_stream_unix_abstract only on linux as "abstract"
         unix socket parameter is only defined on linux.
     v4:
       - rework EXPECT_STATE()
       - use g_dir_make_tmp()
     v3:
     - Add "-M none" to avoid error:
       "No machine specified, and there is no default"
     v2:
     - Fix ipv6 free port allocation
     - Check for IPv4, IPv6, AF_UNIX
     - Use g_mkdtemp() rather than g_file_open_tmp()
     - Use socketpair() in test_stream_fd()
     v1: compared to v14 of "qapi: net: add unix socket type support to netdev backend":
     - use IP addresses 127.0.0.1 and ::1 rather than localhost

Quoted 8 lines
Quoted 4 lines
Quoted 4 lines

  tests/qtest/meson.build     |   2 + tests/qtest/netdev-socket.c | 444 ++++++++++++++++++++++++++++++++++++

  2 files changed, 446 insertions(+)

  create mode 100644 tests/qtest/netdev-socket.c

I'll queue it for my next pull request (unless someone else wants to take this first)

Sorry, but I have to unqueue it again. I'm still seeing failures in the Windows Cirrus-CI:

 https://cirrus-ci.com/task/5867407370092544

For example:

218/556 qemu:qtest+qtest-aarch64 / qtest-aarch64/netdev-socket ERROR           0.02s   exit status 3
------------------------------------- 8< ------------------------------------- stderr:
socket_check_protocol_support() failed

Quoted 6 lines

(C:/Users/ContainerAdministrator/AppData/Local/Temp/cirrus-ci-build/build/tests/qtest/netdev-socket.exe:3300): GLib-CRITICAL **: 09:08:00.984: g_utf8_to_utf16: assertion 'str != NULL' failed

(test program exited with status code 3)

No clue where this comes from, though, I don't see a call to g_utf8_to_utf16() in your code?

OK, there is an error in the log:

socket_check_protocol_support() failed

So tmpdir is NULL and we try an g_rmdir(tmpdir)

I think this is the problem.

But why socket_check_protocol_support() fails?

test-char, test-io-channel-socket, test-util-sockets and test-yank also use it.

It seems we need to call socket_init() before...

I update my test.

Thanks,
Laurent

#7 lore raw
Quoted 30 lines · Laurent Vivier
Quoted 29 lines · Thomas Huth
Quoted 10 lines · Thomas Huth
Quoted 5 lines · Laurent Vivier

ping

Quoted 2 lines · Laurent Vivier

I'll queue it for my next pull request (unless someone else wants to take this first)

Sorry, but I have to unqueue it again. I'm still seeing failures in the Windows Cirrus-CI:

  https://cirrus-ci.com/task/5867407370092544

For example:

218/556 qemu:qtest+qtest-aarch64 / qtest-aarch64/netdev-socket ERROR           0.02s   exit status 3 ------------------------------------- 8<
-------------------------------------
stderr:
socket_check_protocol_support() failed

(C:/Users/ContainerAdministrator/AppData/Local/Temp/cirrus-ci-build/build/tests/qtest/netdev-socket.exe:3300): GLib-CRITICAL **: 09:08:00.984: g_utf8_to_utf16: assertion 'str != NULL' failed

(test program exited with status code 3)

Quoted 8 lines
Quoted 2 lines

No clue where this comes from, though, I don't see a call to g_utf8_to_utf16() in your code?

OK, there is an error in the log:

socket_check_protocol_support() failed

So tmpdir is NULL and we try an g_rmdir(tmpdir)

"In case of errors, NULL is returned and error will be set."

I don't see the ""Can't create temporary directory" string in Thomas' failing job.

In such case, are the g_strconcat(tmpdir) calls returning "\0"?

#8 lore raw
Quoted 37 lines · Philippe Mathieu-Daudé
Quoted 36 lines · Laurent Vivier
Quoted 24 lines · Thomas Huth
Quoted 10 lines · Thomas Huth
Quoted 5 lines · Laurent Vivier

ping

Quoted 2 lines · Laurent Vivier

I'll queue it for my next pull request (unless someone else wants to take this first)

Sorry, but I have to unqueue it again. I'm still seeing failures in the Windows Cirrus-CI:

  https://cirrus-ci.com/task/5867407370092544

For example:

218/556 qemu:qtest+qtest-aarch64 / qtest-aarch64/netdev-socket ERROR           0.02s exit status 3
------------------------------------- 8< ------------------------------------- stderr:
socket_check_protocol_support() failed

Quoted 6 lines

(C:/Users/ContainerAdministrator/AppData/Local/Temp/cirrus-ci-build/build/tests/qtest/netdev-socket.exe:3300): GLib-CRITICAL **: 09:08:00.984: g_utf8_to_utf16: assertion 'str != NULL' failed

(test program exited with status code 3)

No clue where this comes from, though, I don't see a call to g_utf8_to_utf16() in your code?

OK, there is an error in the log:

socket_check_protocol_support() failed

Quoted 10 lines
Quoted 1 line

So tmpdir is NULL and we try an g_rmdir(tmpdir)

"In case of errors, NULL is returned and error will be set."

I don't see the ""Can't create temporary directory" string in Thomas' failing job.

In such case, are the g_strconcat(tmpdir) calls returning "\0"?

I'm going to use g_error() on socket_check_protocol_support() failure to exit. Without the problem with g_utf8_to_utf16() I would not know the socket_init() function was needed.

Thanks,
Laurent