thermal: intel: pch: Add support for Wellsburg PCH
PATCH 1/1 thermal: intel: pch: Add support for Wellsburg PCH
This adds the PCI ID for the Wellsburg C610 series chipset PCH. The driver can read the temperature from the Wellsburg PCH with only the PCI ID added and no other modifications.
--- drivers/thermal/intel/intel_pch_thermal.c | 8 ++++++++ 1 file changed, 8 insertions(+)
drivers/thermal/intel/intel_pch_thermal.c +8 -0
@@ -29,6 +29,7 @@#define PCH_THERMAL_DID_CNL_LP 0x02F9/* CNL-LP PCH */ #define PCH_THERMAL_DID_CML_H 0X06F9/* CML-H PCH */ #define PCH_THERMAL_DID_LWB 0xA1B1/* Lewisburg PCH */ +#define PCH_THERMAL_DID_WBG 0x8D24/* Wellsburg PCH */ /* Wildcat Point-LP PCH Thermal registers */ #define WPT_TEMP 0x0000/* Temperature */
@@ -350,6 +351,7 @@ enum board_ids { board_cnl, board_cml, board_lwb, + board_wbg, }; static const struct board_info {
@@ -380,6 +382,10 @@ static const struct board_info { .name = "pch_lewisburg", .ops = &pch_dev_ops_wpt, }, + [board_wbg] = { + .name = "pch_wellsburg", + .ops = &pch_dev_ops_wpt, + }, }; static int intel_pch_thermal_probe(struct pci_dev *pdev,
@@ -495,6 +501,8 @@ static const struct pci_device_id intel_pch_thermal_id[] = { .driver_data = board_cml, }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_LWB), .driver_data = board_lwb, }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_WBG), + .driver_data = board_wbg, }, { 0, }, };MODULE_DEVICE_TABLE (pci, intel_pch_thermal_id);
Signature · 1 line
2.39.0
Rafael J. Wysocki
maintainerQuoted 6 lines · Tim Zimmermann
This adds the PCI ID for the Wellsburg C610 series chipset PCH. The driver can read the temperature from the Wellsburg PCH with only the PCI ID added and no other modifications.
Signed-off-by Tim Zimmermann <[email protected]>
Rui, Srinivas, any objections to this one?
Quoted 47 lines
--- drivers/thermal/intel/intel_pch_thermal.c | 8 ++++++++ 1 file changed, 8 insertions(+)drivers/thermal/intel/intel_pch_thermal.c +8
-1@@ -29,6 +29,7 @@#define PCH_THERMAL_DID_CNL_LP 0x02F9/* CNL-LP PCH */ #define PCH_THERMAL_DID_CML_H 0X06F9/* CML-H PCH */ #define PCH_THERMAL_DID_LWB 0xA1B1/* Lewisburg PCH */ +#define PCH_THERMAL_DID_WBG 0x8D24/* Wellsburg PCH */ /* Wildcat Point-LP PCH Thermal registers */ #define WPT_TEMP 0x0000/* Temperature */ @@ -350,6 +351,7 @@ enum board_ids { board_cnl, board_cml, board_lwb, + board_wbg, }; static const struct board_info {@@ -380,6 +382,10 @@ static const struct board_info { .name = "pch_lewisburg", .ops = &pch_dev_ops_wpt, }, + [board_wbg] = { + .name = "pch_wellsburg", + .ops = &pch_dev_ops_wpt, + }, }; static int intel_pch_thermal_probe(struct pci_dev *pdev,@@ -495,6 +501,8 @@ static const struct pci_device_id intel_pch_thermal_id[] = { .driver_data = board_cml, }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_LWB), .driver_data = board_lwb, }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_WBG), + .driver_data = board_wbg, }, { 0, }, };MODULE_DEVICE_TABLE (pci, intel_pch_thermal_id); --2.39.0
Quoted 10 lines · Rafael J. Wysocki
Quoted 7 lines · Tim Zimmermann
This adds the PCI ID for the Wellsburg C610 series chipset PCH. The driver can read the temperature from the Wellsburg PCH with only the PCI
ID added and no other modifications.Signed-off-by Tim Zimmermann <[email protected]>Rui, Srinivas, any objections to this one?
No objection.
Thanks,
Srinivas
Quoted 50 lines
Quoted 50 lines
---
drivers/thermal/intel/intel_pch_thermal.c | 8 ++++++++1 file changed, 8 insertions(+)drivers/thermal/intel/intel_pch_thermal.c +8
-0@@ -29,6 +29,7 @@ #define PCH_THERMAL_DID_CNL_LP 0x02F9 /* CNL-LP PCH */ #define PCH_THERMAL_DID_CML_H 0X06F9 /* CML-H PCH */ #define PCH_THERMAL_DID_LWB 0xA1B1 /* Lewisburg PCH */ +#define PCH_THERMAL_DID_WBG 0x8D24/* Wellsburg PCH */ /* Wildcat Point-LP PCH Thermal registers */ #define WPT_TEMP 0x0000 /* Temperature */@@ -350,6 +351,7 @@ enum board_ids { board_cnl, board_cml, board_lwb, + board_wbg, }; static const struct board_info {@@ -380,6 +382,10 @@ static const struct board_info { .name = "pch_lewisburg", .ops = &pch_dev_ops_wpt, }, + [board_wbg] = { + .name = "pch_wellsburg", + .ops = &pch_dev_ops_wpt, + }, }; static int intel_pch_thermal_probe(struct pci_dev *pdev,@@ -495,6 +501,8 @@ static const struct pci_device_id intel_pch_thermal_id[] = { .driver_data = board_cml, }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_LWB), .driver_data = board_lwb, }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_WBG), + .driver_data = board_wbg, }, { 0, }, };MODULE_DEVICE_TABLE(pci,
intel_pch_thermal_id);
--
2.39.0
Zhang, Rui
reviewerQuoted 9 lines · srinivas pandruvada
Quoted 8 lines · Rafael J. Wysocki
Quoted 6 lines · Tim Zimmermann
This adds the PCI ID for the Wellsburg C610 series chipset PCH. The
driver can read the temperature from the Wellsburg PCH with only the PCI
ID added and no other modifications.
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
Signed-off-by Tim Zimmermann <[email protected]>Rui, Srinivas, any objections to this one?
No objection.
And no objections from me.
thanks,
rui
Quoted 52 lines
Thanks,
SrinivasQuoted 49 lines
Quoted 49 lines
--- drivers/thermal/intel/intel_pch_thermal.c | 8 ++++++++ 1 file changed, 8 insertions(+)drivers/thermal/intel/intel_pch_thermal.c +8
-0@@ -29,6 +29,7 @@#define PCH_THERMAL_DID_CNL_LP 0x02F9/* CNL-LP PCH */ #define PCH_THERMAL_DID_CML_H 0X06F9/* CML-H PCH */ #define PCH_THERMAL_DID_LWB 0xA1B1/* Lewisburg PCH */ +#define PCH_THERMAL_DID_WBG 0x8D24/* Wellsburg PCH */ /* Wildcat Point-LP PCH Thermal registers */ #define WPT_TEMP 0x0000/* Temperature */ @@ -350,6 +351,7 @@ enum board_ids { board_cnl, board_cml, board_lwb, + board_wbg, }; static const struct board_info {@@ -380,6 +382,10 @@ static const struct board_info { .name = "pch_lewisburg", .ops = &pch_dev_ops_wpt, }, + [board_wbg] = { + .name = "pch_wellsburg", + .ops = &pch_dev_ops_wpt, + }, }; static int intel_pch_thermal_probe(struct pci_dev *pdev,@@ -495,6 +501,8 @@ static const struct pci_device_id intel_pch_thermal_id[] = { .driver_data = board_cml, }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_LWB), .driver_data = board_lwb, }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_WBG), + .driver_data = board_wbg, }, { 0, }, };
MODULE_DEVICE_TABLE(pci, intel_pch_thermal_id);
--
2.39.0
Quoted 11 lines · Rui
Quoted 9 lines · srinivas pandruvada
Quoted 8 lines · Rafael J. Wysocki
Quoted 6 lines · Tim Zimmermann
This adds the PCI ID for the Wellsburg C610 series chipset PCH. The
driver can read the temperature from the Wellsburg PCH with only the PCI
ID added and no other modifications.
Quoted 6 lines
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
Signed-off-by Tim Zimmermann <[email protected]>Rui, Srinivas, any objections to this one?
No objection.
And no objections from me.
OK
Applied as 6.3 material, thanks!