kbuild: do not export LDFLAGS_vmlinux to decompressor Makefiles
PATCH v2 1/1 kbuild: do not export LDFLAGS_vmlinux to decompressor Makefiles
Nathan Chancellor reports an error message from $(NM) if GNU Make 4.4 is used to build the ARM decompressor.
$ make-4.4 ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- O=build defconfig zImage
[snip]
LD vmlinux
NM System.map
SORTTAB vmlinux
OBJCOPY arch/arm/boot/Image
Kernel: arch/arm/boot/Image is ready
arm-linux-gnueabi-nm: 'arch/arm/boot/compressed/../../../../vmlinux': No such file
/bin/sh: 1: arithmetic expression: expecting primary: " "
LDS arch/arm/boot/compressed/vmlinux.lds
AS arch/arm/boot/compressed/head.o
GZIP arch/arm/boot/compressed/piggy_data
AS arch/arm/boot/compressed/piggy.o
CC arch/arm/boot/compressed/misc.oThis occurs since GNU Make commit 98da874c4303 ("[SV 10593] Export variables to $(shell ...) commands"), and the O= option is needed to reproduce it. The generated zImage is correct despite the error message.
As the commit description of 98da874c4303 [1] says, exported variables are passed down to $(shell ) functions, which means exported recursive variables might be expanded earlier than before, in the parse stage.
The following test code demonstrates the change for GNU Make 4.4.
[Test Makefile]
$(shell echo hello > foo)
export foo = $(shell cat bar/../foo)
$(shell mkdir bar)
all:
@echo $(foo)[GNU Make 4.3]
$ rm -rf bar; make-4.3 hello
[GNU Make 4.4]
$ rm -rf bar; make-4.4 cat: bar/../foo: No such file or directory hello
The 'foo' is a resursively expanded (i.e. lazily expanded) variable.
GNU Make 4.3 expands 'foo' just before running the recipe '@echo $(foo)', at this point, the directory 'bar' exists.
GNU Make 4.4 expands 'foo' to evaluate $(shell mkdir bar) because it is exported. At this point, the directory 'bar' does not exit yet. The cat command cannot resolve the bar/../foo path, hence the error message.
Let's get back to the kernel Makefile.
In arch/arm/boot/compressed/Makefile, KBSS_SZ is referenced by LDFLAGS_vmlinux, which is recursive and also exported by the top Makefile.
GNU Make 4.3 expands KBSS_SZ just before running the recipes, so it works fine.
GNU Make 4.4 expands KBSS_SZ in the parse stage, where the directory arm/arm/boot/compressed does not exit yet. When compiled O= option, the output directory is created by $(shell mkdir -p $(obj-dirs)) in scripts/Makefile.build.
There are two ways to fix this particular issue:
- change "$(obj)/../../../../vmlinux" in KBSS_SZ to "vmlinux"
- unexport LDFLAGS_vmlinux
This commit takes the latter course because it is what I originally intended.
Commit 3ec8a5b33dea ("kbuild: do not export LDFLAGS_vmlinux") unexported LDFLAGS_vmlinux.
Commit 5d4aeffbf709 ("kbuild: rebuild .vmlinux.export.o when its prerequisite is updated") accidentally exported it again.
We can clean up arch/arm/boot/compressed/Makefile later.
[1]: https://git.savannah.gnu.org/cgit/make.git/commit/?id=98da874c43035a490cdca81331724f233a3d0c9a
---
Changes in v2:
- Postpone the change for arch/arm/boot/compressed/Makefile
- Update the commit description
Makefile | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
Makefile +6 -1
@@ -549,7 +549,7 @@ LDFLAGS_MODULE = CFLAGS_KERNEL = RUSTFLAGS_KERNEL = AFLAGS_KERNEL = -export LDFLAGS_vmlinux = +LDFLAGS_vmlinux = # Use USERINCLUDE when you must reference the UAPI directories only. USERINCLUDE := \
@@ -1248,6 +1248,11 @@ vmlinux.o modules.builtin.modinfo modules.builtin: vmlinux_o @: PHONY += vmlinux +# LDFLAGS_vmlinux flags from the top Makefile and arch/*/Makefile should be +# exported for building the top vmlinux, but not for building decompressors. +# They happen to have the same base name (arch/*/boot/compressed/vmlinux). +# The decompressor Makefiles should not inherit LDFLAGS_vmlinux. +vmlinux: export LDFLAGS_vmlinux := $(LDFLAGS_vmlinux) vmlinux: vmlinux.o $(KBUILD_LDS) modpost $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vmlinux
Signature · 1 line
2.34.1
Quoted 104 lines · On Sun, Jan 08, 2023 at 06:53:42PM +0900 Masahiro Yamada wrote:
Date: Sun, 8 Jan 2023 18:53:42 +0900
From: Masahiro Yamada <[email protected]>
To: [email protected]
Cc: [email protected], Nathan Chancellor <[email protected]>,
Masahiro Yamada <[email protected]>, Nick Desaulniers <[email protected]>, Nicolas Schier <[email protected]>
Subject: [PATCH v2] kbuild: do not exportLDFLAGS_vmlinuxto decompressor
Makefiles
Message-Id: <[email protected]>
X-Mailer: git-send-email 2.34.1Nathan Chancellor reports an error message from $(NM) if GNU Make 4.4 is used to build the ARM decompressor.
$ make-4.4 ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- O=build defconfig zImage [snip] LD vmlinux NM System.map SORTTAB vmlinux OBJCOPY arch/arm/boot/Image Kernel: arch/arm/boot/Image is ready arm-linux-gnueabi-nm: 'arch/arm/boot/compressed/../../../../vmlinux': No such file /bin/sh: 1: arithmetic expression: expecting primary: " " LDS arch/arm/boot/compressed/vmlinux.lds AS arch/arm/boot/compressed/head.o GZIP arch/arm/boot/compressed/piggy_data AS arch/arm/boot/compressed/piggy.o CC arch/arm/boot/compressed/misc.oThis occurs since GNU Make commit
98da874c4303("[SV 10593] Export variables to $(shell ...) commands"), and the O= option is needed to reproduce it. The generated zImage is correct despite the error message.As the commit description of
98da874c4303[1] says, exported variables are passed down to $(shell ) functions, which means exported recursive variables might be expanded earlier than before, in the parse stage.The following test code demonstrates the change for GNU Make 4.4.
[Test
Makefile]$(shell echo hello > foo) export foo = $(shell cat bar/../foo) $(shell mkdir bar) all: @echo $(foo)[GNU Make 4.3]
$ rm -rf bar; make-4.3 hello[GNU Make 4.4]
$ rm -rf bar; make-4.4 cat: bar/../foo: No such file or directory helloThe 'foo' is a resursively expanded (i.e. lazily expanded) variable.
GNU Make 4.3 expands 'foo' just before running the recipe '@echo $(foo)', at this point, the directory 'bar' exists.
GNU Make 4.4 expands 'foo' to evaluate $(shell mkdir bar) because it is exported. At this point, the directory 'bar' does not exit yet. The cat command cannot resolve the bar/../foo path, hence the error message.
Let's get back to the kernel
Makefile.In
arch/arm/boot/compressed/Makefile,KBSS_SZis referenced byLDFLAGS_vmlinux, which is recursive and also exported by the topMakefile.GNU Make 4.3 expands
KBSS_SZjust before running the recipes, so it works fine.GNU Make 4.4 expands
KBSS_SZin the parse stage, where the directory arm/arm/boot/compressed does not exit yet. When compiled O= option, the output directory is created by $(shell mkdir -p $(obj-dirs)) inscripts/Makefile.build.There are two ways to fix this particular issue:
- change "$(obj)/../../../../vmlinux" in
KBSS_SZto "vmlinux"
- unexportLDFLAGS_vmlinuxThis commit takes the latter course because it is what I originally intended.
Commit
3ec8a5b33dea("kbuild: do not exportLDFLAGS_vmlinux") unexportedLDFLAGS_vmlinux.Commit
5d4aeffbf709("kbuild: rebuild .vmlinux.export.o when its prerequisite is updated") accidentally exported it again.We can clean up
arch/arm/boot/compressed/Makefilelater.[1]: https://git.savannah.gnu.org/cgit/make.git/commit/?id=98da874c43035a490cdca81331724f233a3d0c9a
Fixes 5d4aeffbf709 ("kbuild: rebuild .vmlinux.export.o when its prerequisite is updated")Reported-by Nathan Chancellor <[email protected]>Signed-off-by Masahiro Yamada <[email protected]>
Quoted 8 lines
---
Changes in v2:
- Postpone the change forarch/arm/boot/compressed/Makefile
- Update the commit descriptionMakefile | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
Once again thanks for the interesting details!