Add minimal boot support for IPQ9574
Subsystems (10)
cover Add minimal boot support for IPQ9574
The IPQ9574 is Qualcomm's 802.11ax SoC for Routers, Gateways and Access Points.
This series adds minimal board boot support for ipq9574-al02-c7 board
POOVENDHAN SELVARAJ (1):
arm64: dts: Add ipq9574 SoC and AL02 board support
devi priya (6):
dt-bindings: arm64: ipq9574: Add binding descriptions for clock and
reset
clk: qcom: Add Global Clock Controller driver for IPQ9574
dt-bindings: pinctrl: qcom: Add ipq9574 pinctrl bindings
pinctrl: qcom: Add IPQ9574 pinctrl driver
dt-bindings: qcom: Add ipq9574 bindings
arm64: defconfig: Enable IPQ9574 SoC base configs
.../devicetree/bindings/arm/qcom.yaml | 7 + .../bindings/clock/qcom,gcc-other.yaml | 4 + .../devicetree/bindings/clock/qcom,gcc.yaml | 9 +- .../bindings/pinctrl/qcom,ipq9574-tlmm.yaml | 129 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts | 69 + arch/arm64/boot/dts/qcom/ipq9574.dtsi | 318 ++ arch/arm64/configs/defconfig | 2 + drivers/clk/qcom/Kconfig | 8 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/gcc-ipq9574.c | 4706 +++++++++++++++++ drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-ipq9574.c | 1003 ++++ include/dt-bindings/clock/qcom,gcc-ipq9574.h | 226 + include/dt-bindings/reset/qcom,gcc-ipq9574.h | 164 + 16 files changed, 6657 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi create mode 100644 drivers/clk/qcom/gcc-ipq9574.c create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq9574.c create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq9574.h create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq9574.h
base-commit: 1fe4fd6f5cad346e598593af36caeadc4f5d4fa9
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 1/7 dt-bindings: arm64: ipq9574: Add binding descriptions for clock and reset
Adding support for the global clock controller found on IPQ9574 based devices
--- .../bindings/clock/qcom,gcc-other.yaml | 4 + .../devicetree/bindings/clock/qcom,gcc.yaml | 9 +- include/dt-bindings/clock/qcom,gcc-ipq9574.h | 226 ++++++++++++++++++ include/dt-bindings/reset/qcom,gcc-ipq9574.h | 164 +++++++++++++ 4 files changed, 402 insertions(+), 1 deletion(-) create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq9574.h create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq9574.h
Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml +4 -0
@@ -18,6 +18,8 @@ description: | include/dt-bindings/clock/qcom,gcc-ipq4019.h include/dt-bindings/clock/qcom,gcc-ipq6018.h include/dt-bindings/reset/qcom,gcc-ipq6018.h + include/dt-bindings/clock/qcom,gcc-ipq9574.h + include/dt-bindings/reset/qcom,gcc-ipq9574.h include/dt-bindings/clock/qcom,gcc-msm8953.h include/dt-bindings/clock/qcom,gcc-mdm9607.h include/dt-bindings/clock/qcom,gcc-mdm9615.h
@@ -34,6 +36,8 @@ properties: - qcom,gcc-mdm9607 - qcom,gcc-msm8953 - qcom,gcc-mdm9615 + - qcom,gcc-ipq9574 + required: - compatible
Documentation/devicetree/bindings/clock/qcom,gcc.yaml +8 -1
@@ -24,6 +24,14 @@ properties: '#power-domain-cells': const: 1 + clocks: + minItems: 1 + maxItems: 8 + + clock-names: + minItems: 1 + maxItems: 8 + reg: maxItems: 1
@@ -35,7 +43,6 @@ required: - reg - '#clock-cells' - '#reset-cells' - - '#power-domain-cells' additionalProperties: true
include/dt-bindings/clock/qcom,gcc-ipq9574.h new file +226 -0
226 lines not on this page · raw message
include/dt-bindings/reset/qcom,gcc-ipq9574.h new file +164 -0
164 lines not on this page · raw message
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Rob Herring
maintainerRe: [PATCH 1/7] dt-bindings: arm64: ipq9574: Add binding descriptions for clock and reset
Quoted 6 lines · devi priya
Adding support for the global clock controller found on IPQ9574 based devices
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Signed-off-by devi priya <[email protected]>
Quoted 9 lines
--- .../bindings/clock/qcom,gcc-other.yaml | 4 + .../devicetree/bindings/clock/qcom,gcc.yaml | 9 +- include/dt-bindings/clock/qcom,gcc-ipq9574.h | 226 ++++++++++++++++++ include/dt-bindings/reset/qcom,gcc-ipq9574.h | 164 +++++++++++++ 4 files changed, 402 insertions(+), 1 deletion(-) create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq9574.h create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq9574.h
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.example.dtb: clock-controller@100000: clocks: [[4294967295, 0], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295, 0], [4294967295, 1], [4294967295, 2], [4294967295]] is too long
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.example.dtb: clock-controller@100000: Unevaluated properties are not allowed ('#clock-cells', '#power-domain-cells', '#reset-cells', 'reg' were unexpected)
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.example.dtb: clock-controller@100000: clocks: [[4294967295, 0], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295]] is too long
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.example.dtb: clock-controller@100000: Unevaluated properties are not allowed ('#clock-cells', '#power-domain-cells', '#reset-cells', 'reg' were unexpected)
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.example.dtb: clock-controller@100000: clocks: [[4294967295, 0], [4294967295, 1], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295]] is too long
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.example.dtb: clock-controller@100000: clock-names: ['bi_tcxo', 'bi_tcxo_ao', 'sleep_clk', 'pcie_0_pipe_clk', 'pcie_1_pipe_clk', 'ufs_phy_rx_symbol_0_clk', 'ufs_phy_rx_symbol_1_clk', 'ufs_phy_tx_symbol_0_clk', 'usb3_phy_wrapper_gcc_usb30_pipe_clk'] is too long
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.example.dtb: clock-controller@100000: Unevaluated properties are not allowed ('#clock-cells', '#power-domain-cells', '#reset-cells', 'reg' were unexpected)
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
Re: [PATCH 1/7] dt-bindings: arm64: ipq9574: Add binding descriptions for clock and reset
Quoted 50 lines · Rob Herring
Quoted 6 lines · devi priya
Adding support for the global clock controller found on IPQ9574 based devices
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Signed-off-by devi priya <[email protected]>Quoted 9 lines
--- .../bindings/clock/qcom,gcc-other.yaml | 4 + .../devicetree/bindings/clock/qcom,gcc.yaml | 9 +- include/dt-bindings/clock/qcom,gcc-ipq9574.h | 226 ++++++++++++++++++ include/dt-bindings/reset/qcom,gcc-ipq9574.h | 164 +++++++++++++ 4 files changed, 402 insertions(+), 1 deletion(-)create mode 100644
include/dt-bindings/clock/qcom,gcc-ipq9574.hcreate mode 100644include/dt-bindings/reset/qcom,gcc-ipq9574.hMy bot found errors running 'make DT_CHECKER_FLAGS=-m
dt_binding_check' on your patch (DT_CHECKER_FLAGSis new in v5.13):yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.example.dtb: clock-controller@100000: clocks: [[4294967295, 0], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295, 0], [4294967295, 1], [4294967295, 2], [4294967295]] is too long
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.example.dtb: clock-controller@100000: Unevaluated properties are not allowed ('#clock-cells', '#power-domain-cells', '#reset-cells', 'reg' were unexpected)
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.example.dtb: clock-controller@100000: clocks: [[4294967295, 0], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295]] is too longFrom schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.example.dtb: clock-controller@100000: Unevaluated properties are not allowed ('#clock-cells', '#power-domain-cells', '#reset-cells', 'reg' were unexpected) From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.example.dtb: clock-controller@100000: clocks: [[4294967295, 0], [4294967295, 1], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295], [4294967295]] is too long
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.example.dtb: clock-controller@100000: clock-names: ['bi_tcxo', 'bi_tcxo_ao', 'sleep_clk', 'pcie_0_pipe_clk', 'pcie_1_pipe_clk', 'ufs_phy_rx_symbol_0_clk', 'ufs_phy_rx_symbol_1_clk', 'ufs_phy_tx_symbol_0_clk', 'usb3_phy_wrapper_gcc_usb30_pipe_clk'] is too long
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.example.dtb: clock-controller@100000: Unevaluated properties are not allowed ('#clock-cells', '#power-domain-cells', '#reset-cells', 'reg' were unexpected)
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yamldoc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch.
If you already ran 'make
dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:
Quoted 6 lines
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note that
DT_SCHEMA_FILEScan be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
Sure, will check
Best Regards,
Devi Priya
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 1/7] dt-bindings: arm64: ipq9574: Add binding descriptions for clock and reset
In reply to devi priyaQuoted 2 lines · devi priya
Adding support for the global clock controller found on IPQ9574 based devices
Subject: drop second/last, redundant "bindings descriptions for". The "dt-bindings" prefix is already stating that these are bindings.
Quoted 27 lines
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Signed-off-by devi priya <[email protected]>--- .../bindings/clock/qcom,gcc-other.yaml | 4 + .../devicetree/bindings/clock/qcom,gcc.yaml | 9 +- include/dt-bindings/clock/qcom,gcc-ipq9574.h | 226 ++++++++++++++++++ include/dt-bindings/reset/qcom,gcc-ipq9574.h | 164 +++++++++++++ 4 files changed, 402 insertions(+), 1 deletion(-) create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq9574.h create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq9574.hDocumentation/devicetree/bindings/clock/qcom,gcc-other.yaml +2
-0@@ -18,6 +18,8 @@ description: | include/dt-bindings/clock/qcom,gcc-ipq4019.h include/dt-bindings/clock/qcom,gcc-ipq6018.h include/dt-bindings/reset/qcom,gcc-ipq6018.h + include/dt-bindings/clock/qcom,gcc-ipq9574.h + include/dt-bindings/reset/qcom,gcc-ipq9574.h include/dt-bindings/clock/qcom,gcc-msm8953.h include/dt-bindings/clock/qcom,gcc-mdm9607.h include/dt-bindings/clock/qcom,gcc-mdm9615.h
Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml properties: · line 39
Quoted 4 lines
Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml +1
-0@@ -34,6 +36,8 @@ properties: - qcom,gcc-mdm9607 - qcom,gcc-msm8953 - qcom,gcc-mdm9615 + - qcom,gcc-ipq9574
Incorrect order but anyway let's switch to new naming style just like SM8550 and SA8775p.
Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml properties: · line 40
Quoted 1 line
Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml +1
-0+
Not related change.
Quoted 8 lines
Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml +0
-0required: - compatibleDocumentation/devicetree/bindings/clock/qcom,gcc.yaml +0
-0
Documentation/devicetree/bindings/clock/qcom,gcc.yaml properties: · line 33
Quoted 10 lines
Documentation/devicetree/bindings/clock/qcom,gcc.yaml +7
-0@@ -24,6 +24,14 @@ properties: '#power-domain-cells': const: 1 + clocks: + minItems: 1 + maxItems: 8 + + clock-names: + minItems: 1 + maxItems: 8
This does not look correct, neither related.
Documentation/devicetree/bindings/clock/qcom,gcc.yaml required: · line 38
Quoted 9 lines
Documentation/devicetree/bindings/clock/qcom,gcc.yaml +1
-1+ reg: maxItems: 1@@ -35,7 +43,6 @@ required: - reg - '#clock-cells' - '#reset-cells' - - '#power-domain-cells'
Eee? Why? What's this?
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 1/7] dt-bindings: arm64: ipq9574: Add binding descriptions for clock and reset
Quoted 6 lines · Krzysztof Kozlowski
Quoted 2 lines · devi priya
Adding support for the global clock controller found on IPQ9574 based devices
Subject: drop second/last, redundant "bindings descriptions for". The "dt-bindings" prefix is already stating that these are bindings.
Sure, will do
Quoted 27 lines
Quoted 27 lines
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Signed-off-by devi priya <[email protected]>--- .../bindings/clock/qcom,gcc-other.yaml | 4 + .../devicetree/bindings/clock/qcom,gcc.yaml | 9 +- include/dt-bindings/clock/qcom,gcc-ipq9574.h | 226 ++++++++++++++++++ include/dt-bindings/reset/qcom,gcc-ipq9574.h | 164 +++++++++++++ 4 files changed, 402 insertions(+), 1 deletion(-)create mode 100644
include/dt-bindings/clock/qcom,gcc-ipq9574.hcreate mode 100644include/dt-bindings/reset/qcom,gcc-ipq9574.hDocumentation/devicetree/bindings/clock/qcom,gcc-other.yaml +2
-0@@ -18,6 +18,8 @@ description: | include/dt-bindings/clock/qcom,gcc-ipq4019.h include/dt-bindings/clock/qcom,gcc-ipq6018.h include/dt-bindings/reset/qcom,gcc-ipq6018.h + include/dt-bindings/clock/qcom,gcc-ipq9574.h + include/dt-bindings/reset/qcom,gcc-ipq9574.h include/dt-bindings/clock/qcom,gcc-msm8953.h include/dt-bindings/clock/qcom,gcc-mdm9607.h include/dt-bindings/clock/qcom,gcc-mdm9615.h
Quoted 8 lines
Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml properties: · line 39
Quoted 5 lines
Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml +1
-0@@ -34,6 +36,8 @@ properties: - qcom,gcc-mdm9607 - qcom,gcc-msm8953 - qcom,gcc-mdm9615 + - qcom,gcc-ipq9574Incorrect order but anyway let's switch to new naming style just like SM8550 and SA8775p.
okay
Quoted 5 lines
Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml properties: · line 40
Quoted 2 lines
Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml +1
-0+Not related change.
Understood, will remove
Quoted 11 lines
Quoted 11 lines
Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml +0
-0required: - compatibleDocumentation/devicetree/bindings/clock/qcom,gcc.yaml +0
-0@@ -24,6 +24,14 @@ properties: '#power-domain-cells': const: 1
Quoted 9 lines
Documentation/devicetree/bindings/clock/qcom,gcc.yaml properties: · line 33
Quoted 7 lines
Documentation/devicetree/bindings/clock/qcom,gcc.yaml +7
-0+ clocks: + minItems: 1 + maxItems: 8 + + clock-names: + minItems: 1 + maxItems: 8This does not look correct, neither related.
Okay
Quoted 11 lines
Documentation/devicetree/bindings/clock/qcom,gcc.yaml required: · line 38
Quoted 9 lines
Documentation/devicetree/bindings/clock/qcom,gcc.yaml +1
-1+ reg: maxItems: 1@@ -35,7 +43,6 @@ required: - reg - '#clock-cells' - '#reset-cells' - - '#power-domain-cells'Eee? Why? What's this?
Sure, will address it accordingly
Quoted 7 lines
Best regards,
Krzysztof
Best regards,
Devi Priya
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 1/7] dt-bindings: arm64: ipq9574: Add binding descriptions for clock and reset
In reply to devi priyaQuoted 7 lines · devi priya
Adding support for the global clock controller found on IPQ9574 based devices
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Signed-off-by devi priya <[email protected]>---
Use subject prefixes matching the subsystem (which you can get for example with git log --oneline -- DIRECTORY_OR_FILE on the directory your patch is touching).
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 1/7] dt-bindings: arm64: ipq9574: Add binding descriptions for clock and reset
Quoted 9 lines · Krzysztof Kozlowski
Quoted 7 lines · devi priya
Adding support for the global clock controller found on IPQ9574 based devices
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Signed-off-by devi priya <[email protected]>---
Quoted 7 lines
Use subject prefixes matching the subsystem (which you can get for example with
git log --oneline -- DIRECTORY_OR_FILEon the directory your patch is touching).Best regards,
Krzysztof
Sure, will do
Best Regards,
Devi Priya
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 2/7 clk: qcom: Add Global Clock Controller driver for IPQ9574
In reply to devi priyaAdd Global Clock Controller (GCC) driver for ipq9574 based devices
--- drivers/clk/qcom/Kconfig | 8 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/gcc-ipq9574.c | 4706 ++++++++++++++++++++++++++++++++ 3 files changed, 4715 insertions(+) create mode 100644 drivers/clk/qcom/gcc-ipq9574.c
drivers/clk/qcom/Kconfig +8 -0
@@ -173,6 +173,14 @@ config IPQ_GCC_8074 i2c, USB, SD/eMMC, etc. Select this for the root clock of ipq8074. +config IPQ_GCC_9574 + tristate "IPQ9574 Global Clock Controller" + help + Support for global clock controller on ipq9574 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. Select this for the root clock + of ipq9574. + config MSM_GCC_8660 tristate "MSM8660 Global Clock Controller" help
drivers/clk/qcom/Makefile +1 -0
@@ -27,6 +27,7 @@ obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o obj-$(CONFIG_IPQ_GCC_8074) += gcc-ipq8074.o +obj-$(CONFIG_IPQ_GCC_9574) += gcc-ipq9574.o obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o obj-$(CONFIG_MDM_GCC_9607) += gcc-mdm9607.o obj-$(CONFIG_MDM_GCC_9615) += gcc-mdm9615.o
drivers/clk/qcom/gcc-ipq9574.c new file +4706 -0
2,979 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.17.1
Part of the diff is not shown here. View the raw message.
Re: [PATCH 2/7] clk: qcom: Add Global Clock Controller driver for IPQ9574
Quoted 49 lines · devi priya
Add Global Clock Controller (GCC) driver for ipq9574 based devices
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Signed-off-by devi priya <[email protected]>--- drivers/clk/qcom/Kconfig | 8 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/gcc-ipq9574.c | 4706 ++++++++++++++++++++++++++++++++ 3 files changed, 4715 insertions(+) create mode 100644 drivers/clk/qcom/gcc-ipq9574.cdrivers/clk/qcom/Kconfig +8
-0@@ -173,6 +173,14 @@ config IPQ_GCC_8074 i2c, USB, SD/eMMC, etc. Select this for the root clock of ipq8074. +config IPQ_GCC_9574 + tristate "IPQ9574 Global Clock Controller" + help + Support for global clock controller on ipq9574 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. Select this for the root clock + of ipq9574. + config MSM_GCC_8660 tristate "MSM8660 Global Clock Controller" helpdrivers/clk/qcom/Makefile +1
-0@@ -27,6 +27,7 @@ obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o obj-$(CONFIG_IPQ_GCC_8074) += gcc-ipq8074.o +obj-$(CONFIG_IPQ_GCC_9574) += gcc-ipq9574.o obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o obj-$(CONFIG_MDM_GCC_9607) += gcc-mdm9607.o obj-$(CONFIG_MDM_GCC_9615) += gcc-mdm9615.odrivers/clk/qcom/gcc-ipq9574.c new file +0
-0
drivers/clk/qcom/gcc-ipq9574.c line 1
Quoted 1 line
drivers/clk/qcom/gcc-ipq9574.c new file +1
-0@@ -0,0 +1,4706 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
Hm, interesting choice for a C driver..
Quoted 16 lines
drivers/clk/qcom/gcc-ipq9574.c new file +16
-0+/* +* Copyright (c) 2022 The Linux Foundation. All rights reserved. +*/ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/clk-provider.h> +#include <linux/regmap.h> + +#include <linux/reset-controller.h> +#include <dt-bindings/clock/qcom,gcc-ipq9574.h> +#include <dt-bindings/reset/qcom,gcc-ipq9574.h>
drivers/clk/qcom/gcc-ipq9574.c line 27
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ +#include "common.h" +#include "clk-regmap.h" +#include "clk-pll.h" +#include "clk-rcg.h" +#include "clk-branch.h" +#include "clk-alpha-pll.h" +#include "clk-regmap-divider.h" +#include "clk-regmap-mux.h" +#include "reset.h"
Many of these includes seem unnecessary..
drivers/clk/qcom/gcc-ipq9574.c line 29
Quoted 2 lines
drivers/clk/qcom/gcc-ipq9574.c new file +2
-0+ +#define F (f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) }
Drop.
Quoted 43 lines
drivers/clk/qcom/gcc-ipq9574.c new file +43
-0+ +/* Need to match the order of clocks in DT binding */ +enum { +DT_XO , +DT_SLEEP_CLK , +DT_BIAS_PLL_UBI_NC_CLK , +DT_PCIE30_PHY0_PIPE_CLK , +DT_PCIE30_PHY1_PIPE_CLK , +DT_PCIE30_PHY2_PIPE_CLK , +DT_PCIE30_PHY3_PIPE_CLK , +DT_USB3PHY_0_CC_PIPE_CLK , +}; + +enum { +P_XO , +P_PCIE30_PHY0_PIPE , +P_PCIE30_PHY1_PIPE , +P_PCIE30_PHY2_PIPE , +P_PCIE30_PHY3_PIPE , +P_USB3PHY_0_PIPE , +P_GPLL0 , +P_GPLL0_DIV2 , +P_GPLL0_OUT_AUX , +P_GPLL2 , +P_GPLL4 , +P_PI_SLEEP , +P_BIAS_PLL_UBI_NC_CLK , +}; + +static const struct parent_map gcc_xo_map[] = { + {P_XO ,0 }, +}; + +static const struct clk_parent_data gcc_xo_data[] = { + { .index =DT_XO }, +}; + +static const struct clk_parent_data gcc_sleep_clk_data[] = { + { .index =DT_SLEEP_CLK }, +}; + +static struct clk_alpha_pll gpll0_main = { + .offset =0x20000 ,
drivers/clk/qcom/gcc-ipq9574.c line 82
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT], + .clkr = { + .enable_reg = 0x0b000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data) { + .name = "gpll0_main", + .parent_data = gcc_xo_data, + .num_parents = ARRAY_SIZE(gcc_xo_data), + .ops = &clk_alpha_pll_ops, + .flags = CLK_IS_CRITICAL,
Is it? Does it act as a CPU PLL source that's not managed by the firmware?
Quoted 33 lines
drivers/clk/qcom/gcc-ipq9574.c new file +33
-0+ }, + }, +}; + +static struct clk_fixed_factor gpll0_out_main_div2 = { + .mult =1 , + .div =2 , + .hw.init = &(struct clk_init_data ) { + .name ="gpll0_out_main_div2" , + .parent_hws = (const struct clk_hw *[]) { + &gpll0_main.clkr.hw }, + .num_parents =1 , + .ops = &clk_fixed_factor_ops, + .flags =CLK_SET_RATE_PARENT , + }, +}; + +static struct clk_alpha_pll_postdiv gpll0 = { + .offset =0x20000 , + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT ], + .width =4 , + .clkr.hw.init = &(struct clk_init_data ) { + .name ="gpll0" , + .parent_hws = (const struct clk_hw *[]) { + &gpll0_main.clkr.hw }, + .num_parents =1 , + .ops = &clk_alpha_pll_postdiv_ro_ops, + .flags =CLK_SET_RATE_PARENT , + }, +}; + +static struct clk_alpha_pll gpll4_main = { + .offset =0x22000 ,
drivers/clk/qcom/gcc-ipq9574.c line 125
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT], + .clkr = { + .enable_reg = 0x0b000, + .enable_mask = BIT(2), + .hw.init = &(struct clk_init_data) { + .name = "gpll4_main", + .parent_data = gcc_xo_data, + .num_parents = ARRAY_SIZE(gcc_xo_data), + .ops = &clk_alpha_pll_ops, + .flags = CLK_IS_CRITICAL,
Again, is it?
drivers/clk/qcom/gcc-ipq9574.c line 137
Quoted 12 lines
drivers/clk/qcom/gcc-ipq9574.c new file +12
-0+ }, + }, +}; + +static struct clk_alpha_pll_postdiv gpll4 = { + .offset =0x22000 , + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT ], + .width =4 , + .clkr.hw.init = &(struct clk_init_data ) { + .name ="gpll4" , + .parent_hws = (const struct clk_hw *[]) { + &gpll4_main.clkr.hw },
Please put the }, in a new line.
Quoted 44 lines
drivers/clk/qcom/gcc-ipq9574.c new file +44
-0+ .num_parents = 1, + .ops = &clk_alpha_pll_postdiv_ro_ops, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_alpha_pll gpll2_main = { + .offset =0x21000 , + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT ], + .clkr = { + .enable_reg =0x0b000 , + .enable_mask =BIT (1 ), + .hw.init = &(struct clk_init_data ) { + .name ="gpll2_main" , + .parent_data = gcc_xo_data, + .num_parents =ARRAY_SIZE (gcc_xo_data), + .ops = &clk_alpha_pll_ops, + .flags =CLK_IS_CRITICAL , + }, + }, +}; + +static struct clk_alpha_pll_postdiv gpll2 = { + .offset =0x21000 , + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT ], + .width =4 , + .clkr.hw.init = &(struct clk_init_data ) { + .name ="gpll2" , + .parent_hws = (const struct clk_hw *[]) { + &gpll2_main.clkr.hw }, + .num_parents =1 , + .ops = &clk_alpha_pll_postdiv_ro_ops, + .flags =CLK_SET_RATE_PARENT , + }, +}; + +static struct clk_branch gcc_sleep_clk_src = { + .halt_reg =0x3400c , + .clkr = { + .enable_reg =0x3400c , + .enable_mask =BIT (1 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_sleep_clk_src" , + .parent_data = gcc_sleep_clk_data,
drivers/clk/qcom/gcc-ipq9574.c line 191
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .num_parents = ARRAY_SIZE(gcc_sleep_clk_data), + .ops = &clk_branch2_ops, + .flags = CLK_IS_CRITICAL, + }, + }, +}; + +static const struct clk_parent_data gcc_xo_gpll0_gpll0_out_main_div2[] = { + { .index =DT_XO }, + { .hw = &gpll0.clkr.hw},
Please consistently add a space before },
Quoted 30 lines
drivers/clk/qcom/gcc-ipq9574.c new file +30
-0+ { .hw = &gpll0_out_main_div2.hw}, +}; + +static const struct parent_map gcc_xo_gpll0_gpll0_out_main_div2_map[] = { + {P_XO ,0 }, + {P_GPLL0 ,1 }, + {P_GPLL0_DIV2 ,4 }, +}; + +static const struct clk_parent_data gcc_xo_gpll0[] = { + { .index =DT_XO }, + { .hw = &gpll0.clkr.hw }, +}; + +static const struct parent_map gcc_xo_gpll0_map[] = { + {P_XO ,0 }, + {P_GPLL0 ,1 }, +}; + +static const struct clk_parent_data gcc_xo_gpll0_gpll4[] = { + { .index =DT_XO }, + { .hw = &gpll0.clkr.hw }, + { .hw = &gpll4.clkr.hw }, +}; + +static const struct parent_map gcc_xo_gpll0_gpll4_map[] = { + {P_XO ,0 }, + {P_GPLL0 ,1 }, + {P_GPLL4 ,2 }, +};
drivers/clk/qcom/gcc-ipq9574.c line 231
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ +static const struct clk_parent_data gcc_xo_gpll0_gpll0_div2_gpll0[] = { + { .index =DT_XO }, + { .hw = &gpll0.clkr.hw }, + { .hw = &gpll0_out_main_div2.hw }, + { .hw = &gpll0.clkr.hw }, +}; + +static const struct parent_map +gcc_xo_gpll0_gpll0_div2_gpll0_map[] = {
Pretty sure you can unwrap that line
Quoted 6 lines
drivers/clk/qcom/gcc-ipq9574.c new file +6
-0+ { P_XO, 0 }, + { P_GPLL0, 1 }, + { P_GPLL0_DIV2, 4 }, + { P_GPLL0, 5 }, +}; +
[...]
drivers/clk/qcom/gcc-ipq9574.c line 980
Quoted 11 lines
drivers/clk/qcom/gcc-ipq9574.c new file +11
-0+static struct clk_branch gcc_blsp1_qup6_i2c_apps_clk = { + .halt_reg =0x07024 , + .clkr = { + .enable_reg =0x07024 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_blsp1_qup6_i2c_apps_clk" , + .parent_hws = (const struct clk_hw *[]) { + &blsp1_qup6_i2c_apps_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED ,
Sounds very much like a hack..
[...]
drivers/clk/qcom/gcc-ipq9574.c line 1873
Quoted 2 lines
drivers/clk/qcom/gcc-ipq9574.c new file +2
-0+static struct clk_branch gcc_snoc_usb_clk = { + .halt_reg =0x2E058 ,
Please lowercase hex all throughout the file.
Quoted 14 lines
drivers/clk/qcom/gcc-ipq9574.c new file +14
-0+ .clkr = { + .enable_reg = 0x2E058, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_snoc_usb_clk" , + .parent_hws = (const struct clk_hw *[]) { + &usb0_master_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_branch2_ops, + }, + }, +}; +
[...]
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c new file +8
-0+ +static struct clk_rcg2 pcnoc_bfdcd_clk_src = { + .cmd_rcgr =0x31004 , + .freq_tbl = ftbl_pcnoc_bfdcd_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="pcnoc_bfdcd_clk_src" ,
drivers/clk/qcom/gcc-ipq9574.c line 2073
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, + .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + .flags = CLK_IS_CRITICAL, + }, +}; + +static struct clk_fixed_factor pcnoc_clk_src = { + .mult =1 , + .div = 1,
Is there any benefit in keeping it instead of providing the real rcg as a parent?
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .hw.init = &(struct clk_init_data) { + .name ="pcnoc_clk_src" , + .parent_hws = (const struct clk_hw *[]) { + &pcnoc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .ops = &clk_fixed_factor_ops, + .flags =CLK_SET_RATE_PARENT , + }, +}; +
[...]
drivers/clk/qcom/gcc-ipq9574.c line 2190
Quoted 11 lines
drivers/clk/qcom/gcc-ipq9574.c new file +11
-0+static struct clk_branch gcc_snoc_pcnoc_ahb_clk = { + .halt_reg =0x2E03C , + .clkr = { + .enable_reg =0x2E03C , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_snoc_pcnoc_ahb_clk" , + .parent_hws = (const struct clk_hw *[]) { + &pcnoc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED ,
Can it be turned off? Perhaps CLK_IS_CRITICAL would be more fitting, with a comment explaining why.
Quoted 6 lines
drivers/clk/qcom/gcc-ipq9574.c new file +6
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_anoc_pcnoc_ahb_clk = {
drivers/clk/qcom/gcc-ipq9574.c line 2206
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .halt_reg = 0x2E094, + .clkr = { + .enable_reg = 0x2E094, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data) { + .name = "gcc_anoc_pcnoc_ahb_clk", + .parent_hws = (const struct clk_hw *[]) { + &pcnoc_bfdcd_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
Same thing
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + + +static struct clk_rcg2 system_noc_bfdcd_clk_src = {
drivers/clk/qcom/gcc-ipq9574.c line 2488
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .cmd_rcgr = 0x2e004, + .freq_tbl = ftbl_system_noc_bfdcd_clk_src, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll4_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="system_noc_bfdcd_clk_src" , + .parent_data = gcc_xo_gpll0_gpll4, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0_gpll4), + .ops = &clk_rcg2_ops, + .flags =CLK_IS_CRITICAL ,
.flags goes before .ops in all other nodes, please be consistent.
Quoted 21 lines
drivers/clk/qcom/gcc-ipq9574.c new file +21
-0+ }, +}; + +static struct clk_branch gcc_q6ss_boot_clk = { + .halt_reg =0x25080 , + .halt_check =BRANCH_HALT_SKIP , + .clkr = { + .enable_reg =0x25080 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_q6ss_boot_clk" , + .parent_hws = (const struct clk_hw *[]) { + &system_noc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_nssnoc_snoc_clk = {
drivers/clk/qcom/gcc-ipq9574.c line 2519
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .halt_reg = 0x17028, + .clkr = { + .enable_reg = 0x17028, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data) { + .name = "gcc_nssnoc_snoc_clk", + .parent_hws = (const struct clk_hw *[]) { + &system_noc_bfdcd_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
Same story as with PCNoC
Quoted 6 lines
drivers/clk/qcom/gcc-ipq9574.c new file +6
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_nssnoc_snoc_1_clk = {
drivers/clk/qcom/gcc-ipq9574.c line 2535
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .halt_reg = 0x1707c, + .clkr = { + .enable_reg = 0x1707c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data) { + .name = "gcc_nssnoc_snoc_1_clk", + .parent_hws = (const struct clk_hw *[]) { + &system_noc_bfdcd_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
And here
Quoted 41 lines
drivers/clk/qcom/gcc-ipq9574.c new file +41
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qdss_etr_usb_clk = { + .halt_reg =0x2D060 , + .clkr = { + .enable_reg =0x2D060 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qdss_etr_usb_clk" , + .parent_hws = (const struct clk_hw *[]) { + &system_noc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_wcss_ahb_clk_src[] = { +F (24000000 ,P_XO ,1 ,0 ,0 ), +F (133333333 ,P_GPLL0 ,6 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 wcss_ahb_clk_src = { + .cmd_rcgr =0x25030 , + .freq_tbl = ftbl_wcss_ahb_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="wcss_ahb_clk_src" , + .parent_data = gcc_xo_gpll0, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_q6_ahb_clk = {
drivers/clk/qcom/gcc-ipq9574.c line 2586
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .halt_reg = 0x25014, + .clkr = { + .enable_reg = 0x25014, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data) { + .name = "gcc_q6_ahb_clk", + .parent_hws = (const struct clk_hw *[]) { + &wcss_ahb_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
This sounds like a hack, perhaps it should be fed to a remoteproc node?
Quoted 6 lines
drivers/clk/qcom/gcc-ipq9574.c new file +6
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_q6_ahb_s_clk = {
drivers/clk/qcom/gcc-ipq9574.c line 2602
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .halt_reg = 0x25018, + .clkr = { + .enable_reg = 0x25018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data) { + .name = "gcc_q6_ahb_s_clk", + .parent_hws = (const struct clk_hw *[]) { + &wcss_ahb_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
And this one too
Quoted 6 lines
drivers/clk/qcom/gcc-ipq9574.c new file +6
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_ecahb_clk = {
drivers/clk/qcom/gcc-ipq9574.c line 2618
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .halt_reg = 0x25058, + .clkr = { + .enable_reg = 0x25058, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data) { + .name = "gcc_wcss_ecahb_clk", + .parent_hws = (const struct clk_hw *[]) { + &wcss_ahb_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
Similarly, this one should probably be fed to the wcss node and properly managed with a driver, not left dangling
Quoted 6 lines
drivers/clk/qcom/gcc-ipq9574.c new file +6
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_acmt_clk = {
drivers/clk/qcom/gcc-ipq9574.c line 2634
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .halt_reg = 0x2505c, + .clkr = { + .enable_reg = 0x2505c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data) { + .name = "gcc_wcss_acmt_clk", + .parent_hws = (const struct clk_hw *[]) { + &wcss_ahb_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
Ditto
Quoted 6 lines
drivers/clk/qcom/gcc-ipq9574.c new file +6
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sys_noc_axi_clk = {
drivers/clk/qcom/gcc-ipq9574.c line 2650
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .halt_reg = 0x2e01c, + .clkr = { + .enable_reg = 0x2e01c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data) { + .name = "gcc_sys_noc_axi_clk", + .parent_hws = (const struct clk_hw *[]) { + &system_noc_bfdcd_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
CLK_IS_CRITICAL?
Quoted 6 lines
drivers/clk/qcom/gcc-ipq9574.c new file +6
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_anoc0_axi_clk = {
drivers/clk/qcom/gcc-ipq9574.c line 2666
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .halt_reg = 0x2e078, + .clkr = { + .enable_reg = 0x2e078, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data) { + .name = "gcc_anoc0_axi_clk", + .parent_hws = (const struct clk_hw *[]) { + &system_noc_bfdcd_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
If this it the same kind of ANoC(n) as on 8996/8998, this should definitely be either CLK_IS_CRITICAL or managed through a driver.. Probably the second one..
Quoted 6 lines
drivers/clk/qcom/gcc-ipq9574.c new file +6
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_anoc1_axi_clk = {
drivers/clk/qcom/gcc-ipq9574.c line 2682
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .halt_reg = 0x2e088, + .clkr = { + .enable_reg = 0x2e088, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data) { + .name = "gcc_anoc1_axi_clk", + .parent_hws = (const struct clk_hw *[]) { + &system_noc_bfdcd_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
Ditto
Quoted 6 lines
drivers/clk/qcom/gcc-ipq9574.c new file +6
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_anoc0_tbu_clk = {
drivers/clk/qcom/gcc-ipq9574.c line 2698
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .halt_reg = 0x12038, + .clkr = { + .enable_reg = 0xb00c, + .enable_mask = BIT(3), + .hw.init = &(struct clk_init_data) { + .name = "gcc_anoc0_tbu_clk", + .parent_hws = (const struct clk_hw *[]) { + &system_noc_bfdcd_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
Ditto
Quoted 6 lines
drivers/clk/qcom/gcc-ipq9574.c new file +6
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_anoc1_tbu_clk = {
drivers/clk/qcom/gcc-ipq9574.c line 2714
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .halt_reg = 0x12048, + .clkr = { + .enable_reg = 0xb00c, + .enable_mask = BIT(5), + .hw.init = &(struct clk_init_data) { + .name = "gcc_anoc1_tbu_clk", + .parent_hws = (const struct clk_hw *[]) { + &system_noc_bfdcd_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
Ditto
Quoted 6 lines
drivers/clk/qcom/gcc-ipq9574.c new file +6
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_mem_noc_snoc_axi_clk = {
drivers/clk/qcom/gcc-ipq9574.c line 2730
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .halt_reg = 0x19018, + .clkr = { + .enable_reg = 0x19018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data) { + .name = "gcc_mem_noc_snoc_axi_clk", + .parent_hws = (const struct clk_hw *[]) { + &system_noc_bfdcd_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
This one also smells of an interconnect clock more than anything else..
Quoted 6 lines
drivers/clk/qcom/gcc-ipq9574.c new file +6
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_imem_axi_clk = {
drivers/clk/qcom/gcc-ipq9574.c line 2746
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .halt_reg = 0xe004, + .clkr = { + .enable_reg = 0xb004, + .enable_mask = BIT(12), + .hw.init = &(struct clk_init_data) { + .name = "gcc_imem_axi_clk", + .parent_hws = (const struct clk_hw *[]) { + &system_noc_bfdcd_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
You could pass this one to the imem node
Quoted 6 lines
drivers/clk/qcom/gcc-ipq9574.c new file +6
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sys_noc_wcss_ahb_clk = {
drivers/clk/qcom/gcc-ipq9574.c line 2762
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .halt_reg = 0x2e030, + .clkr = { + .enable_reg = 0x2e030, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data) { + .name = "gcc_sys_noc_wcss_ahb_clk", + .parent_hws = (const struct clk_hw *[]) { + &wcss_ahb_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
Definitely handled through a driver..
Quoted 26 lines
drivers/clk/qcom/gcc-ipq9574.c new file +26
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_wcss_axi_m_clk_src[] = { +F (24000000 ,P_XO ,1 ,0 ,0 ), +F (133333333 ,P_GPLL0 ,6 ,0 ,0 ), +F (266666667 ,P_GPLL0 ,3 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 wcss_axi_m_clk_src = { + .cmd_rcgr =0x25078 , + .freq_tbl = ftbl_wcss_axi_m_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="wcss_axi_m_clk_src" , + .parent_data = gcc_xo_gpll0, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_anoc_wcss_axi_m_clk = {
drivers/clk/qcom/gcc-ipq9574.c line 2798
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .halt_reg = 0x2e0a8, + .clkr = { + .enable_reg = 0x2e0a8, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data) { + .name = "gcc_anoc_wcss_axi_m_clk", + .parent_hws = (const struct clk_hw *[]) { + &wcss_axi_m_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
Ditto
Quoted 24 lines
drivers/clk/qcom/gcc-ipq9574.c new file +24
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_qdss_at_clk_src[] = { +F (240000000 ,P_GPLL4 ,5 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 qdss_at_clk_src = { + .cmd_rcgr =0x2d004 , + .freq_tbl = ftbl_qdss_at_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll4_gpll0_gpll0_div2_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="qdss_at_clk_src" , + .parent_data = gcc_xo_gpll4_gpll0_gpll0_div2, + .num_parents =ARRAY_SIZE (gcc_xo_gpll4_gpll0_gpll0_div2), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_q6ss_atbm_clk = {
drivers/clk/qcom/gcc-ipq9574.c line 2832
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .halt_reg = 0x2501c, + .clkr = { + .enable_reg = 0x2501c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data) { + .name = "gcc_q6ss_atbm_clk", + .parent_hws = (const struct clk_hw *[]) { + &qdss_at_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
Ditto
Quoted 6 lines
drivers/clk/qcom/gcc-ipq9574.c new file +6
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_dbg_ifc_atb_clk = {
drivers/clk/qcom/gcc-ipq9574.c line 2848
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .halt_reg = 0x2503c, + .clkr = { + .enable_reg = 0x2503c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data) { + .name = "gcc_wcss_dbg_ifc_atb_clk", + .parent_hws = (const struct clk_hw *[]) { + &qdss_at_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
Not gonna point out every similar occurence, you probably get me now
Quoted 22 lines
drivers/clk/qcom/gcc-ipq9574.c new file +22
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_nssnoc_atb_clk = { + .halt_reg =0x17014 , + .clkr = { + .enable_reg =0x17014 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_nssnoc_atb_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_at_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qdss_at_clk = {
drivers/clk/qcom/gcc-ipq9574.c line 2880
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .halt_reg = 0x2D038, + .clkr = { + .enable_reg = 0x2D038, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data) { + .name = "gcc_qdss_at_clk", + .parent_hws = (const struct clk_hw *[]) { + &qdss_at_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
Probably not critical, you don't need debug 24/7.
Quoted 51 lines
drivers/clk/qcom/gcc-ipq9574.c new file +51
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sys_noc_at_clk = { + .halt_reg =0x2e038 , + .clkr = { + .enable_reg =0x2e038 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_sys_noc_at_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_at_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IS_CRITICAL , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcnoc_at_clk = { + .halt_reg =0x31024 , + .clkr = { + .enable_reg =0x31024 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_pcnoc_at_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_at_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IS_CRITICAL , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_fixed_factor gcc_eud_at_div_clk_src = { + .mult =1 , + .div =6 , + .hw.init = &(struct clk_init_data ) { + .name ="gcc_eud_at_div_clk_src" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_at_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_fixed_factor_ops, + }, +}; + +static struct clk_branch gcc_usb0_eud_at_clk = {
drivers/clk/qcom/gcc-ipq9574.c line 2941
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .halt_reg = 0x30004, + .clkr = { + .enable_reg = 0x30004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data) { + .name = "gcc_usb0_eud_at_clk", + .parent_hws = (const struct clk_hw *[]) { + &gcc_eud_at_div_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
Definitely not critical.
Quoted 6 lines
drivers/clk/qcom/gcc-ipq9574.c new file +6
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qdss_eud_at_clk = {
drivers/clk/qcom/gcc-ipq9574.c line 2957
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .halt_reg = 0x2D06C, + .clkr = { + .enable_reg = 0x2D06C, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data) { + .name = "gcc_qdss_eud_at_clk", + .parent_hws = (const struct clk_hw *[]) { + &gcc_eud_at_div_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
Ditto.
Quoted 431 lines
drivers/clk/qcom/gcc-ipq9574.c new file +431
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_qdss_stm_clk_src[] = { +F (24000000 ,P_XO ,1 ,0 ,0 ), +F (200000000 ,P_GPLL0 ,4 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 qdss_stm_clk_src = { + .cmd_rcgr =0x2D00C , + .freq_tbl = ftbl_qdss_stm_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="qdss_stm_clk_src" , + .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_qdss_stm_clk = { + .halt_reg =0x2D03C , + .clkr = { + .enable_reg =0x2D03C , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qdss_stm_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_stm_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sys_noc_qdss_stm_axi_clk = { + .halt_reg =0x2E034 , + .clkr = { + .enable_reg =0x2E034 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_sys_noc_qdss_stm_axi_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_stm_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_qdss_traceclkin_clk_src[] = { +F (300000000 ,P_GPLL4 ,4 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 qdss_traceclkin_clk_src = { + .cmd_rcgr =0x2d014 , + .freq_tbl = ftbl_qdss_traceclkin_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll4_gpll0_gpll0_div2_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="qdss_traceclkin_clk_src" , + .parent_data = gcc_xo_gpll4_gpll0_gpll0_div2, + .num_parents =ARRAY_SIZE (gcc_xo_gpll4_gpll0_gpll0_div2), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_qdss_traceclkin_clk = { + .halt_reg =0x2D040 , + .clkr = { + .enable_reg =0x2D040 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qdss_traceclkin_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_traceclkin_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_qdss_tsctr_clk_src[] = { +F (600000000 ,P_GPLL4 ,2 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 qdss_tsctr_clk_src = { + .cmd_rcgr =0x2d01c , + .freq_tbl = ftbl_qdss_tsctr_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll4_gpll0_gpll0_div2_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="qdss_tsctr_clk_src" , + .parent_data = gcc_xo_gpll4_gpll0_gpll0_div2, + .num_parents =ARRAY_SIZE (gcc_xo_gpll4_gpll0_gpll0_div2), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_fixed_factor qdss_tsctr_div2_clk_src = { + .mult =1 , + .div =2 , + .hw.init = &(struct clk_init_data ) { + .name ="qdss_tsctr_div2_clk_src" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_fixed_factor_ops, + }, +}; + +static struct clk_branch gcc_q6_tsctr_1to2_clk = { + .halt_reg =0x25020 , + .clkr = { + .enable_reg =0x25020 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_q6_tsctr_1to2_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_div2_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_dbg_ifc_nts_clk = { + .halt_reg =0x25040 , + .clkr = { + .enable_reg =0x25040 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_wcss_dbg_ifc_nts_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_div2_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qdss_tsctr_div2_clk = { + .halt_reg =0x2d044 , + .clkr = { + .enable_reg =0x2d044 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qdss_tsctr_div2_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_div2_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_uniphy_sys_clk_src[] = { +F (24000000 ,P_XO ,1 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 uniphy_sys_clk_src = { + .cmd_rcgr =0x17090 , + .freq_tbl = ftbl_uniphy_sys_clk_src, + .mnd_width =8 , + .hid_width =5 , + .parent_map = gcc_xo_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="uniphy_sys_clk_src" , + .parent_data = gcc_xo_data, + .num_parents =ARRAY_SIZE (gcc_xo_data), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 nss_ts_clk_src = { + .cmd_rcgr =0x17088 , + .freq_tbl = ftbl_uniphy_sys_clk_src, + .mnd_width =8 , + .hid_width =5 , + .parent_map = gcc_xo_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="nss_ts_clk_src" , + .parent_data = gcc_xo_data, + .num_parents =ARRAY_SIZE (gcc_xo_data), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_qdss_ts_clk = { + .halt_reg =0x2D078 , + .clkr = { + .enable_reg =0x2D078 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qdss_ts_clk" , + .parent_hws = (const struct clk_hw *[]) { + &nss_ts_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_snoc_ts_clk = { + .halt_reg =0x2e068 , + .clkr = { + .enable_reg =0x2e068 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_snoc_ts_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_div2_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_mem_noc_ts_clk = { + .halt_reg =0x19028 , + .clkr = { + .enable_reg =0x19028 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_mem_noc_ts_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_div2_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_fixed_factor qdss_dap_sync_clk_src = { + .mult =1 , + .div =4 , + .hw.init = &(struct clk_init_data ) { + .name ="qdss_dap_sync_clk_src" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_clk_src.clkr.hw }, + .num_parents =1 , + .ops = &clk_fixed_factor_ops, + }, +}; + +static struct clk_branch gcc_qdss_tsctr_div4_clk = { + .halt_reg =0x2d04c , + .clkr = { + .enable_reg =0x2d04c , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qdss_tsctr_div4_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_dap_sync_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_fixed_factor qdss_tsctr_div8_clk_src = { + .mult =1 , + .div =8 , + .hw.init = &(struct clk_init_data ) { + .name ="qdss_tsctr_div8_clk_src" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_clk_src.clkr.hw }, + .num_parents =1 , + .ops = &clk_fixed_factor_ops, + }, +}; + +static struct clk_branch gcc_nss_ts_clk = { + .halt_reg =0x17018 , + .clkr = { + .enable_reg =0x17018 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_nss_ts_clk" , + .parent_hws = (const struct clk_hw *[]) { + &nss_ts_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qdss_tsctr_div8_clk = { + .halt_reg =0x2d050 , + .clkr = { + .enable_reg =0x2d050 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qdss_tsctr_div8_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_div8_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcnoc_ts_clk = { + .halt_reg =0x3102c , + .clkr = { + .enable_reg =0x3102c , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_pcnoc_ts_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_div8_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_fixed_factor qdss_tsctr_div16_clk_src = { + .mult =1 , + .div =16 , + .hw.init = &(struct clk_init_data ) { + .name ="qdss_tsctr_div16_clk_src" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_clk_src.clkr.hw }, + .num_parents =1 , + .ops = &clk_fixed_factor_ops, + }, +}; + +static struct clk_branch gcc_qdss_tsctr_div16_clk = { + .halt_reg =0x2d054 , + .clkr = { + .enable_reg =0x2d054 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qdss_tsctr_div16_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_div16_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_q6ss_pclkdbg_clk = { + .halt_reg =0x25024 , + .clkr = { + .enable_reg =0x25024 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_q6ss_pclkdbg_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_dap_sync_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_q6ss_trig_clk = { + .halt_reg =0x25068 , + .clkr = { + .enable_reg =0x25068 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_q6ss_trig_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_dap_sync_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_dbg_ifc_apb_clk = { + .halt_reg =0x25038 , + .clkr = { + .enable_reg =0x25038 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_wcss_dbg_ifc_apb_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_dap_sync_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_dbg_ifc_dapbus_clk = { + .halt_reg =0x25044 , + .clkr = { + .enable_reg =0x25044 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_wcss_dbg_ifc_dapbus_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_dap_sync_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qdss_dap_clk = {
drivers/clk/qcom/gcc-ipq9574.c line 3398
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .halt_reg = 0x2d058, + .clkr = { + .enable_reg = 0x2d058, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data) { + .name = "gcc_qdss_dap_clk", + .parent_hws = (const struct clk_hw *[]) { + &qdss_dap_sync_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
Probably not critical.
Quoted 626 lines
drivers/clk/qcom/gcc-ipq9574.c new file +625
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qdss_apb2jtag_clk = { + .halt_reg =0x2d05c , + .clkr = { + .enable_reg =0x2d05c , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qdss_apb2jtag_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_dap_sync_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcnoc_dcc_clk = { + .halt_reg =0x31080 , + .clkr = { + .enable_reg =0x31080 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_pcnoc_dcc_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_dap_sync_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_fixed_factor qdss_tsctr_div3_clk_src = { + .mult =1 , + .div =3 , + .hw.init = &(struct clk_init_data ) { + .name ="qdss_tsctr_div3_clk_src" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_clk_src.clkr.hw }, + .num_parents =1 , + .ops = &clk_fixed_factor_ops, + }, +}; + +static struct clk_branch gcc_qdss_tsctr_div3_clk = { + .halt_reg =0x2d048 , + .clkr = { + .enable_reg =0x2d048 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qdss_tsctr_div3_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_div3_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_qpic_io_macro_clk_src[] = { +F (24000000 ,P_XO ,1 ,0 ,0 ), +F (100000000 ,P_GPLL0 ,8 ,0 ,0 ), +F (200000000 ,P_GPLL0 ,4 ,0 ,0 ), +F (320000000 ,P_GPLL0 ,2.5 ,0 ,0 ), +F (400000000 ,P_GPLL0 ,2 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 qpic_io_macro_clk_src = { + .cmd_rcgr =0x32004 , + .freq_tbl = ftbl_qpic_io_macro_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_gpll2_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="qpic_io_macro_clk_src" , + .parent_data = gcc_xo_gpll0_gpll2, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0_gpll2), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_qpic_io_macro_clk = { + .halt_reg =0x3200c , + .clkr = { + .enable_reg =0x3200c , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qpic_io_macro_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qpic_io_macro_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_q6_axi_clk_src[] = { +F (533333333 ,P_GPLL0 ,1.5 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 q6_axi_clk_src = { + .cmd_rcgr =0x25004 , + .freq_tbl = ftbl_q6_axi_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_gpll2_gpll4_pi_sleep_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="q6_axi_clk_src" , + .parent_data = gcc_xo_gpll0_gpll2_gpll4_pi_sleep, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0_gpll2_gpll4_pi_sleep), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_q6_axim_clk = { + .halt_reg =0x2500c , + .clkr = { + .enable_reg =0x2500c , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_q6_axim_clk" , + .parent_hws = (const struct clk_hw *[]) { + &q6_axi_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_q6_tbu_clk = { + .halt_reg =0x12050 , + .halt_check =BRANCH_HALT_DELAY , + .clkr = { + .enable_reg =0xb00c , + .enable_mask =BIT (6 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_wcss_q6_tbu_clk" , + .parent_hws = (const struct clk_hw *[]) { + &q6_axi_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_mem_noc_q6_axi_clk = { + .halt_reg =0x19010 , + .clkr = { + .enable_reg =0x19010 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_mem_noc_q6_axi_clk" , + .parent_hws = (const struct clk_hw *[]) { + &q6_axi_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_q6_axim2_clk_src[] = { +F (342857143 ,P_GPLL4 ,3.5 ,0 ,0 ), + { } +}; + +static const struct parent_map gcc_xo_gpll0_gpll4_bias_pll_ubinc_clk_map[] = { + {P_XO ,0 }, + {P_GPLL0 ,1 }, + {P_GPLL4 ,2 }, + {P_BIAS_PLL_UBI_NC_CLK ,4 }, +}; + +static struct clk_rcg2 q6_axim2_clk_src = { + .cmd_rcgr =0x25028 , + .freq_tbl = ftbl_q6_axim2_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_gpll4_bias_pll_ubinc_clk_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="q6_axim2_clk_src" , + .parent_data = gcc_xo_gpll0_gpll4_bias_pll_ubi_nc_clk, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0_gpll4_bias_pll_ubi_nc_clk), + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_nssnoc_memnoc_bfdcd_clk_src[] = { +F (533333333 ,P_GPLL0 ,1.5 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 nssnoc_memnoc_bfdcd_clk_src = { + .cmd_rcgr =0x17004 , + .freq_tbl = ftbl_nssnoc_memnoc_bfdcd_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_gpll0_aux_gpll2_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="nssnoc_memnoc_bfdcd_clk_src" , + .parent_data = gcc_xo_gpll0_gpll0_aux_gpll2, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0_gpll0_aux_gpll2), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_nssnoc_memnoc_clk = { + .halt_reg =0x17024 , + .clkr = { + .enable_reg =0x17024 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_nssnoc_memnoc_clk" , + .parent_hws = (const struct clk_hw *[]) { + &nssnoc_memnoc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_nssnoc_mem_noc_1_clk = { + .halt_reg =0x17084 , + .clkr = { + .enable_reg =0x17084 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_nssnoc_mem_noc_1_clk" , + .parent_hws = (const struct clk_hw *[]) { + &nssnoc_memnoc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_nss_tbu_clk = { + .halt_reg =0x12040 , + .clkr = { + .enable_reg =0xb00c , + .enable_mask =BIT (4 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_nss_tbu_clk" , + .parent_hws = (const struct clk_hw *[]) { + &nssnoc_memnoc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_mem_noc_nssnoc_clk = { + .halt_reg =0x19014 , + .clkr = { + .enable_reg =0x19014 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_mem_noc_nssnoc_clk" , + .parent_hws = (const struct clk_hw *[]) { + &nssnoc_memnoc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_lpass_axim_clk_src[] = { +F (133333333 ,P_GPLL0 ,6 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 lpass_axim_clk_src = { + .cmd_rcgr =0x2700c , + .freq_tbl = ftbl_lpass_axim_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="lpass_axim_clk_src" , + .parent_data = gcc_xo_gpll0, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 lpass_sway_clk_src = { + .cmd_rcgr =0x27004 , + .freq_tbl = ftbl_lpass_axim_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="lpass_sway_clk_src" , + .parent_data = gcc_xo_gpll0, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0), + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_adss_pwm_clk_src[] = { +F (24000000 ,P_XO ,1 ,0 ,0 ), +F (100000000 ,P_GPLL0 ,8 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 adss_pwm_clk_src = { + .cmd_rcgr =0x1c004 , + .freq_tbl = ftbl_adss_pwm_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="adss_pwm_clk_src" , + .parent_data = gcc_xo_gpll0, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_adss_pwm_clk = { + .halt_reg =0x1c00c , + .clkr = { + .enable_reg =0x1c00c , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_adss_pwm_clk" , + .parent_hws = (const struct clk_hw *[]) { + &adss_pwm_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_gp1_clk_src[] = { +F (24000000 ,P_XO ,1 ,0 ,0 ), +F (200000000 ,P_GPLL0 ,4 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 gp1_clk_src = { + .cmd_rcgr =0x8004 , + .freq_tbl = ftbl_gp1_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_gpll0_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="gp1_clk_src" , + .parent_data = gcc_xo_gpll0_gpll0_sleep_clk, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0_gpll0_sleep_clk), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gp2_clk_src = { + .cmd_rcgr =0x9004 , + .freq_tbl = ftbl_gp1_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_gpll0_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="gp2_clk_src" , + .parent_data = gcc_xo_gpll0_gpll0_sleep_clk, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0_gpll0_sleep_clk), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gp3_clk_src = { + .cmd_rcgr =0xa004 , + .freq_tbl = ftbl_gp1_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_gpll0_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="gp3_clk_src" , + .parent_data = gcc_xo_gpll0_gpll0_sleep_clk, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0_gpll0_sleep_clk), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_xo_clk_src = { + .halt_reg =0x34004 , + .clkr = { + .enable_reg =0x34004 , + .enable_mask =BIT (1 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_xo_clk_src" , + .parent_data = gcc_xo_data, + .num_parents =ARRAY_SIZE (gcc_xo_data), + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_nssnoc_xo_dcd_clk = { + .halt_reg =0x17074 , + .clkr = { + .enable_reg =0x17074 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_nssnoc_xo_dcd_clk" , + .parent_hws = (const struct clk_hw *[]) { + &gcc_xo_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_xo_clk = { + .halt_reg =0x34018 , + .clkr = { + .enable_reg =0x34018 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_xo_clk" , + .parent_hws = (const struct clk_hw *[]) { + &gcc_xo_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IS_CRITICAL , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_uniphy0_sys_clk = { + .halt_reg =0x17048 , + .clkr = { + .enable_reg =0x17048 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_uniphy0_sys_clk" , + .parent_hws = (const struct clk_hw *[]) { + &uniphy_sys_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_uniphy1_sys_clk = { + .halt_reg =0x17058 , + .clkr = { + .enable_reg =0x17058 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_uniphy1_sys_clk" , + .parent_hws = (const struct clk_hw *[]) { + &uniphy_sys_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_uniphy2_sys_clk = { + .halt_reg =0x17068 , + .clkr = { + .enable_reg =0x17068 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_uniphy2_sys_clk" , + .parent_hws = (const struct clk_hw *[]) { + &uniphy_sys_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_cmn_12gpll_sys_clk = { + .halt_reg =0x3a008 , + .clkr = { + .enable_reg =0x3a008 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_cmn_12gpll_sys_clk" , + .parent_hws = (const struct clk_hw *[]) { + &uniphy_sys_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_fixed_factor gcc_xo_div4_clk_src = { + .mult =1 , + .div =4 , + .hw.init = &(struct clk_init_data ) { + .name ="gcc_xo_div4_clk_src" , + .parent_hws = (const struct clk_hw *[]) { + &gcc_xo_clk_src.clkr.hw }, + .num_parents =1 , + .ops = &clk_fixed_factor_ops, + .flags =CLK_SET_RATE_PARENT , + }, +}; + +static struct clk_branch gcc_nssnoc_qosgen_ref_clk = { + .halt_reg =0x1701c , + .clkr = { + .enable_reg =0x1701c , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_nssnoc_qosgen_ref_clk" , + .parent_hws = (const struct clk_hw *[]) { + &gcc_xo_div4_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_nssnoc_timeout_ref_clk = { + .halt_reg =0x17020 , + .clkr = { + .enable_reg =0x17020 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_nssnoc_timeout_ref_clk" , + .parent_hws = (const struct clk_hw *[]) { + &gcc_xo_div4_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_xo_div4_clk = { + .halt_reg =0x3401c , + .clkr = { + .enable_reg =0x3401c , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_xo_div4_clk" , + .parent_hws = (const struct clk_hw *[]) { + &gcc_xo_div4_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IS_CRITICAL , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_hw *gcc_ipq9574_hws[] = { + &gpll0_out_main_div2.hw, + &gcc_xo_div4_clk_src.hw, + &qdss_dap_sync_clk_src.hw, + &qdss_tsctr_div2_clk_src.hw, + &qdss_tsctr_div8_clk_src.hw, + &qdss_tsctr_div16_clk_src.hw, + &qdss_tsctr_div3_clk_src.hw, + &gcc_eud_at_div_clk_src.hw, + &pcnoc_clk_src.hw, +}; + +static int clk_dummy_is_enabled (struct clk_hw *hw) +{ +return 1 ; +}; + +static int clk_dummy_enable (struct clk_hw *hw) +{ +return 0 ; +}; + +static void clk_dummy_disable (struct clk_hw *hw) +{ +return ; +}; + +static u8 clk_dummy_get_parent (struct clk_hw *hw) +{ +return 0 ; +}; + +static int clk_dummy_set_parent (struct clk_hw *hw,u8 index) +{ +return 0 ; +}; + +static int clk_dummy_set_rate (struct clk_hw *hw,unsigned long rate, +unsigned long parent_rate) +{ +return 0 ; +}; + +static int clk_dummy_determine_rate (struct clk_hw *hw, +struct clk_rate_request *req) +{ +return 0 ; +}; + +static unsigned long clk_dummy_recalc_rate (struct clk_hw *hw, +unsigned long parent_rate) +{ +return parent_rate; +}; + +static const struct clk_ops clk_dummy_ops = { + .is_enabled = clk_dummy_is_enabled, + .enable = clk_dummy_enable, + .disable = clk_dummy_disable, + .get_parent = clk_dummy_get_parent, + .set_parent = clk_dummy_set_parent, + .set_rate = clk_dummy_set_rate, + .recalc_rate = clk_dummy_recalc_rate, + .determine_rate = clk_dummy_determine_rate, +};
drivers/clk/qcom/gcc-ipq9574.c line 4033
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ +#define DEFINE_DUMMY_CLK (clk_name) \ +(&(struct clk_regmap) { \ + .hw.init = &(struct clk_init_data) { \ + .name = #clk_name, \ + .parent_names = (const char *[]) { "xo"}, \ + .num_parents = 1, \ + .ops = &clk_dummy_ops, \ + }, \ +})
Definitely a big no.
Quoted 429 lines
drivers/clk/qcom/gcc-ipq9574.c new file +429
-0+ +static struct clk_regmap *gcc_ipq9574_clks[] = { + [GPLL0_MAIN ] = &gpll0_main.clkr, + [GPLL0 ] = &gpll0.clkr, + [GPLL4_MAIN ] = &gpll4_main.clkr, + [GPLL4 ] = &gpll4.clkr, + [GPLL2_MAIN ] = &gpll2_main.clkr, + [GPLL2 ] = &gpll2.clkr, + [GCC_SLEEP_CLK_SRC ] = &gcc_sleep_clk_src.clkr, + [APSS_AHB_CLK_SRC ] = &apss_ahb_clk_src.clkr, + [APSS_AXI_CLK_SRC ] = &apss_axi_clk_src.clkr, + [BLSP1_QUP1_I2C_APPS_CLK_SRC ] = &blsp1_qup1_i2c_apps_clk_src.clkr, + [BLSP1_QUP1_SPI_APPS_CLK_SRC ] = &blsp1_qup1_spi_apps_clk_src.clkr, + [BLSP1_QUP2_I2C_APPS_CLK_SRC ] = &blsp1_qup2_i2c_apps_clk_src.clkr, + [BLSP1_QUP2_SPI_APPS_CLK_SRC ] = &blsp1_qup2_spi_apps_clk_src.clkr, + [BLSP1_QUP3_I2C_APPS_CLK_SRC ] = &blsp1_qup3_i2c_apps_clk_src.clkr, + [BLSP1_QUP3_SPI_APPS_CLK_SRC ] = &blsp1_qup3_spi_apps_clk_src.clkr, + [BLSP1_QUP4_I2C_APPS_CLK_SRC ] = &blsp1_qup4_i2c_apps_clk_src.clkr, + [BLSP1_QUP4_SPI_APPS_CLK_SRC ] = &blsp1_qup4_spi_apps_clk_src.clkr, + [BLSP1_QUP5_I2C_APPS_CLK_SRC ] = &blsp1_qup5_i2c_apps_clk_src.clkr, + [BLSP1_QUP5_SPI_APPS_CLK_SRC ] = &blsp1_qup5_spi_apps_clk_src.clkr, + [BLSP1_QUP6_I2C_APPS_CLK_SRC ] = &blsp1_qup6_i2c_apps_clk_src.clkr, + [BLSP1_QUP6_SPI_APPS_CLK_SRC ] = &blsp1_qup6_spi_apps_clk_src.clkr, + [BLSP1_UART1_APPS_CLK_SRC ] = &blsp1_uart1_apps_clk_src.clkr, + [BLSP1_UART2_APPS_CLK_SRC ] = &blsp1_uart2_apps_clk_src.clkr, + [BLSP1_UART3_APPS_CLK_SRC ] = &blsp1_uart3_apps_clk_src.clkr, + [BLSP1_UART4_APPS_CLK_SRC ] = &blsp1_uart4_apps_clk_src.clkr, + [BLSP1_UART5_APPS_CLK_SRC ] = &blsp1_uart5_apps_clk_src.clkr, + [BLSP1_UART6_APPS_CLK_SRC ] = &blsp1_uart6_apps_clk_src.clkr, + [GCC_APSS_AHB_CLK ] = &gcc_apss_ahb_clk.clkr, + [GCC_APSS_AXI_CLK ] = &gcc_apss_axi_clk.clkr, + [GCC_BLSP1_QUP1_I2C_APPS_CLK ] = &gcc_blsp1_qup1_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP1_SPI_APPS_CLK ] = &gcc_blsp1_qup1_spi_apps_clk.clkr, + [GCC_BLSP1_QUP2_I2C_APPS_CLK ] = &gcc_blsp1_qup2_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP2_SPI_APPS_CLK ] = &gcc_blsp1_qup2_spi_apps_clk.clkr, + [GCC_BLSP1_QUP3_I2C_APPS_CLK ] = &gcc_blsp1_qup3_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP3_SPI_APPS_CLK ] = &gcc_blsp1_qup3_spi_apps_clk.clkr, + [GCC_BLSP1_QUP4_I2C_APPS_CLK ] = &gcc_blsp1_qup4_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP4_SPI_APPS_CLK ] = &gcc_blsp1_qup4_spi_apps_clk.clkr, + [GCC_BLSP1_QUP5_I2C_APPS_CLK ] = &gcc_blsp1_qup5_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP5_SPI_APPS_CLK ] = &gcc_blsp1_qup5_spi_apps_clk.clkr, + [GCC_BLSP1_QUP6_I2C_APPS_CLK ] = &gcc_blsp1_qup6_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP6_SPI_APPS_CLK ] = &gcc_blsp1_qup6_spi_apps_clk.clkr, + [GCC_BLSP1_UART1_APPS_CLK ] = &gcc_blsp1_uart1_apps_clk.clkr, + [GCC_BLSP1_UART2_APPS_CLK ] = &gcc_blsp1_uart2_apps_clk.clkr, + [GCC_BLSP1_UART3_APPS_CLK ] = &gcc_blsp1_uart3_apps_clk.clkr, + [GCC_BLSP1_UART4_APPS_CLK ] = &gcc_blsp1_uart4_apps_clk.clkr, + [GCC_BLSP1_UART5_APPS_CLK ] = &gcc_blsp1_uart5_apps_clk.clkr, + [GCC_BLSP1_UART6_APPS_CLK ] = &gcc_blsp1_uart6_apps_clk.clkr, + [PCIE0_AXI_M_CLK_SRC ] = &pcie0_axi_m_clk_src.clkr, + [GCC_PCIE0_AXI_M_CLK ] = &gcc_pcie0_axi_m_clk.clkr, + [PCIE1_AXI_M_CLK_SRC ] = &pcie1_axi_m_clk_src.clkr, + [GCC_PCIE1_AXI_M_CLK ] = &gcc_pcie1_axi_m_clk.clkr, + [PCIE2_AXI_M_CLK_SRC ] = &pcie2_axi_m_clk_src.clkr, + [GCC_PCIE2_AXI_M_CLK ] = &gcc_pcie2_axi_m_clk.clkr, + [PCIE3_AXI_M_CLK_SRC ] = &pcie3_axi_m_clk_src.clkr, + [GCC_PCIE3_AXI_M_CLK ] = &gcc_pcie3_axi_m_clk.clkr, + [PCIE0_AXI_S_CLK_SRC ] = &pcie0_axi_s_clk_src.clkr, + [GCC_PCIE0_AXI_S_BRIDGE_CLK ] = &gcc_pcie0_axi_s_bridge_clk.clkr, + [GCC_PCIE0_AXI_S_CLK ] = &gcc_pcie0_axi_s_clk.clkr, + [PCIE1_AXI_S_CLK_SRC ] = &pcie1_axi_s_clk_src.clkr, + [GCC_PCIE1_AXI_S_BRIDGE_CLK ] = &gcc_pcie1_axi_s_bridge_clk.clkr, + [GCC_PCIE1_AXI_S_CLK ] = &gcc_pcie1_axi_s_clk.clkr, + [PCIE2_AXI_S_CLK_SRC ] = &pcie2_axi_s_clk_src.clkr, + [GCC_PCIE2_AXI_S_BRIDGE_CLK ] = &gcc_pcie2_axi_s_bridge_clk.clkr, + [GCC_PCIE2_AXI_S_CLK ] = &gcc_pcie2_axi_s_clk.clkr, + [PCIE3_AXI_S_CLK_SRC ] = &pcie3_axi_s_clk_src.clkr, + [GCC_PCIE3_AXI_S_BRIDGE_CLK ] = &gcc_pcie3_axi_s_bridge_clk.clkr, + [GCC_PCIE3_AXI_S_CLK ] = &gcc_pcie3_axi_s_clk.clkr, + [PCIE0_PIPE_CLK_SRC ] = &pcie0_pipe_clk_src.clkr, + [PCIE1_PIPE_CLK_SRC ] = &pcie1_pipe_clk_src.clkr, + [PCIE2_PIPE_CLK_SRC ] = &pcie2_pipe_clk_src.clkr, + [PCIE3_PIPE_CLK_SRC ] = &pcie3_pipe_clk_src.clkr, + [PCIE_AUX_CLK_SRC ] = &pcie_aux_clk_src.clkr, + [GCC_PCIE0_AUX_CLK ] = &gcc_pcie0_aux_clk.clkr, + [GCC_PCIE1_AUX_CLK ] = &gcc_pcie1_aux_clk.clkr, + [GCC_PCIE2_AUX_CLK ] = &gcc_pcie2_aux_clk.clkr, + [GCC_PCIE3_AUX_CLK ] = &gcc_pcie3_aux_clk.clkr, + [PCIE0_RCHNG_CLK_SRC ] = &pcie0_rchng_clk_src.clkr, + [GCC_PCIE0_RCHNG_CLK ] = &gcc_pcie0_rchng_clk.clkr, + [PCIE1_RCHNG_CLK_SRC ] = &pcie1_rchng_clk_src.clkr, + [GCC_PCIE1_RCHNG_CLK ] = &gcc_pcie1_rchng_clk.clkr, + [PCIE2_RCHNG_CLK_SRC ] = &pcie2_rchng_clk_src.clkr, + [GCC_PCIE2_RCHNG_CLK ] = &gcc_pcie2_rchng_clk.clkr, + [PCIE3_RCHNG_CLK_SRC ] = &pcie3_rchng_clk_src.clkr, + [GCC_PCIE3_RCHNG_CLK ] = &gcc_pcie3_rchng_clk.clkr, + [GCC_PCIE0_AHB_CLK ] = &gcc_pcie0_ahb_clk.clkr, + [GCC_PCIE1_AHB_CLK ] = &gcc_pcie1_ahb_clk.clkr, + [GCC_PCIE2_AHB_CLK ] = &gcc_pcie2_ahb_clk.clkr, + [GCC_PCIE3_AHB_CLK ] = &gcc_pcie3_ahb_clk.clkr, + [USB0_AUX_CLK_SRC ] = &usb0_aux_clk_src.clkr, + [GCC_USB0_AUX_CLK ] = &gcc_usb0_aux_clk.clkr, + [USB0_MASTER_CLK_SRC ] = &usb0_master_clk_src.clkr, + [GCC_USB0_MASTER_CLK ] = &gcc_usb0_master_clk.clkr, + [GCC_SNOC_USB_CLK ] = &gcc_snoc_usb_clk.clkr, + [GCC_ANOC_USB_AXI_CLK ] = &gcc_anoc_usb_axi_clk.clkr, + [USB0_MOCK_UTMI_CLK_SRC ] = &usb0_mock_utmi_clk_src.clkr, + [USB0_MOCK_UTMI_DIV_CLK_SRC ] = &usb0_mock_utmi_div_clk_src.clkr, + [GCC_USB0_MOCK_UTMI_CLK ] = &gcc_usb0_mock_utmi_clk.clkr, + [USB0_PIPE_CLK_SRC ] = &usb0_pipe_clk_src.clkr, + [GCC_USB0_PHY_CFG_AHB_CLK ] = &gcc_usb0_phy_cfg_ahb_clk.clkr, + [SDCC1_APPS_CLK_SRC ] = &sdcc1_apps_clk_src.clkr, + [GCC_SDCC1_APPS_CLK ] = &gcc_sdcc1_apps_clk.clkr, + [SDCC1_ICE_CORE_CLK_SRC ] = &sdcc1_ice_core_clk_src.clkr, + [GCC_SDCC1_ICE_CORE_CLK ] = &gcc_sdcc1_ice_core_clk.clkr, + [GCC_SDCC1_AHB_CLK ] = &gcc_sdcc1_ahb_clk.clkr, + [PCNOC_BFDCD_CLK_SRC ] = &pcnoc_bfdcd_clk_src.clkr, + [GCC_NSSCFG_CLK ] = &gcc_nsscfg_clk.clkr, + [GCC_NSSNOC_NSSCC_CLK ] = &gcc_nssnoc_nsscc_clk.clkr, + [GCC_NSSCC_CLK ] = &gcc_nsscc_clk.clkr, + [GCC_NSSNOC_PCNOC_1_CLK ] = &gcc_nssnoc_pcnoc_1_clk.clkr, + [GCC_QDSS_DAP_AHB_CLK ] = &gcc_qdss_dap_ahb_clk.clkr, + [GCC_QDSS_CFG_AHB_CLK ] = &gcc_qdss_cfg_ahb_clk.clkr, + [GCC_SNOC_PCNOC_AHB_CLK ] = &gcc_snoc_pcnoc_ahb_clk.clkr, + [GCC_ANOC_PCNOC_AHB_CLK ] = &gcc_anoc_pcnoc_ahb_clk.clkr, + [GCC_QPIC_AHB_CLK ] = &gcc_qpic_ahb_clk.clkr, + [GCC_QPIC_CLK ] = &gcc_qpic_clk.clkr, + [GCC_BLSP1_AHB_CLK ] = &gcc_blsp1_ahb_clk.clkr, + [GCC_MDIO_AHB_CLK ] = &gcc_mdio_ahb_clk.clkr, + [GCC_PRNG_AHB_CLK ] = &gcc_prng_ahb_clk.clkr, + [GCC_UNIPHY0_AHB_CLK ] = &gcc_uniphy0_ahb_clk.clkr, + [GCC_UNIPHY1_AHB_CLK ] = &gcc_uniphy1_ahb_clk.clkr, + [GCC_UNIPHY2_AHB_CLK ] = &gcc_uniphy2_ahb_clk.clkr, + [GCC_CMN_12GPLL_AHB_CLK ] = &gcc_cmn_12gpll_ahb_clk.clkr, + [GCC_CMN_12GPLL_APU_CLK ] = &gcc_cmn_12gpll_apu_clk.clkr, + [SYSTEM_NOC_BFDCD_CLK_SRC ] = &system_noc_bfdcd_clk_src.clkr, + [GCC_NSSNOC_SNOC_CLK ] = &gcc_nssnoc_snoc_clk.clkr, + [GCC_NSSNOC_SNOC_1_CLK ] = &gcc_nssnoc_snoc_1_clk.clkr, + [GCC_QDSS_ETR_USB_CLK ] = &gcc_qdss_etr_usb_clk.clkr, + [GCC_SYS_NOC_AXI_CLK ] = &gcc_sys_noc_axi_clk.clkr, + [GCC_ANOC0_AXI_CLK ] = &gcc_anoc0_axi_clk.clkr, + [GCC_ANOC1_AXI_CLK ] = &gcc_anoc1_axi_clk.clkr, + [GCC_ANOC0_TBU_CLK ] = &gcc_anoc0_tbu_clk.clkr, + [GCC_ANOC1_TBU_CLK ] = &gcc_anoc1_tbu_clk.clkr, + [GCC_MEM_NOC_SNOC_AXI_CLK ] = &gcc_mem_noc_snoc_axi_clk.clkr, + [GCC_IMEM_AXI_CLK ] = &gcc_imem_axi_clk.clkr, + [WCSS_AHB_CLK_SRC ] = &wcss_ahb_clk_src.clkr, + [GCC_Q6_AHB_CLK ] = &gcc_q6_ahb_clk.clkr, + [GCC_Q6_AHB_S_CLK ] = &gcc_q6_ahb_s_clk.clkr, + [GCC_WCSS_ECAHB_CLK ] = &gcc_wcss_ecahb_clk.clkr, + [GCC_WCSS_ACMT_CLK ] = &gcc_wcss_acmt_clk.clkr, + [GCC_SYS_NOC_WCSS_AHB_CLK ] = &gcc_sys_noc_wcss_ahb_clk.clkr, + [WCSS_AXI_M_CLK_SRC ] = &wcss_axi_m_clk_src.clkr, + [GCC_ANOC_WCSS_AXI_M_CLK ] = &gcc_anoc_wcss_axi_m_clk.clkr, + [QDSS_AT_CLK_SRC ] = &qdss_at_clk_src.clkr, + [GCC_Q6SS_ATBM_CLK ] = &gcc_q6ss_atbm_clk.clkr, + [GCC_WCSS_DBG_IFC_ATB_CLK ] = &gcc_wcss_dbg_ifc_atb_clk.clkr, + [GCC_NSSNOC_ATB_CLK ] = &gcc_nssnoc_atb_clk.clkr, + [GCC_QDSS_AT_CLK ] = &gcc_qdss_at_clk.clkr, + [GCC_SYS_NOC_AT_CLK ] = &gcc_sys_noc_at_clk.clkr, + [GCC_PCNOC_AT_CLK ] = &gcc_pcnoc_at_clk.clkr, + [GCC_USB0_EUD_AT_CLK ] = &gcc_usb0_eud_at_clk.clkr, + [GCC_QDSS_EUD_AT_CLK ] = &gcc_qdss_eud_at_clk.clkr, + [QDSS_STM_CLK_SRC ] = &qdss_stm_clk_src.clkr, + [GCC_QDSS_STM_CLK ] = &gcc_qdss_stm_clk.clkr, + [GCC_SYS_NOC_QDSS_STM_AXI_CLK ] = &gcc_sys_noc_qdss_stm_axi_clk.clkr, + [QDSS_TRACECLKIN_CLK_SRC ] = &qdss_traceclkin_clk_src.clkr, + [GCC_QDSS_TRACECLKIN_CLK ] = &gcc_qdss_traceclkin_clk.clkr, + [QDSS_TSCTR_CLK_SRC ] = &qdss_tsctr_clk_src.clkr, + [GCC_Q6_TSCTR_1TO2_CLK ] = &gcc_q6_tsctr_1to2_clk.clkr, + [GCC_WCSS_DBG_IFC_NTS_CLK ] = &gcc_wcss_dbg_ifc_nts_clk.clkr, + [GCC_QDSS_TSCTR_DIV2_CLK ] = &gcc_qdss_tsctr_div2_clk.clkr, + [GCC_QDSS_TS_CLK ] = &gcc_qdss_ts_clk.clkr, + [GCC_SNOC_TS_CLK ] = &gcc_snoc_ts_clk.clkr, + [GCC_MEM_NOC_TS_CLK ] = &gcc_mem_noc_ts_clk.clkr, + [GCC_QDSS_TSCTR_DIV4_CLK ] = &gcc_qdss_tsctr_div4_clk.clkr, + [GCC_NSS_TS_CLK ] = &gcc_nss_ts_clk.clkr, + [GCC_QDSS_TSCTR_DIV8_CLK ] = &gcc_qdss_tsctr_div8_clk.clkr, + [GCC_PCNOC_TS_CLK ] = &gcc_pcnoc_ts_clk.clkr, + [GCC_QDSS_TSCTR_DIV16_CLK ] = &gcc_qdss_tsctr_div16_clk.clkr, + [GCC_Q6SS_PCLKDBG_CLK ] = &gcc_q6ss_pclkdbg_clk.clkr, + [GCC_Q6SS_TRIG_CLK ] = &gcc_q6ss_trig_clk.clkr, + [GCC_WCSS_DBG_IFC_APB_CLK ] = &gcc_wcss_dbg_ifc_apb_clk.clkr, + [GCC_WCSS_DBG_IFC_DAPBUS_CLK ] = &gcc_wcss_dbg_ifc_dapbus_clk.clkr, + [GCC_QDSS_DAP_CLK ] = &gcc_qdss_dap_clk.clkr, + [GCC_QDSS_APB2JTAG_CLK ] = &gcc_qdss_apb2jtag_clk.clkr, + [GCC_QDSS_TSCTR_DIV3_CLK ] = &gcc_qdss_tsctr_div3_clk.clkr, + [QPIC_IO_MACRO_CLK_SRC ] = &qpic_io_macro_clk_src.clkr, + [GCC_QPIC_IO_MACRO_CLK ] = &gcc_qpic_io_macro_clk.clkr, + [Q6_AXI_CLK_SRC ] = &q6_axi_clk_src.clkr, + [GCC_Q6_AXIM_CLK ] = &gcc_q6_axim_clk.clkr, + [GCC_WCSS_Q6_TBU_CLK ] = &gcc_wcss_q6_tbu_clk.clkr, + [GCC_MEM_NOC_Q6_AXI_CLK ] = &gcc_mem_noc_q6_axi_clk.clkr, + [Q6_AXIM2_CLK_SRC ] = &q6_axim2_clk_src.clkr, + [NSSNOC_MEMNOC_BFDCD_CLK_SRC ] = &nssnoc_memnoc_bfdcd_clk_src.clkr, + [GCC_NSSNOC_MEMNOC_CLK ] = &gcc_nssnoc_memnoc_clk.clkr, + [GCC_NSSNOC_MEM_NOC_1_CLK ] = &gcc_nssnoc_mem_noc_1_clk.clkr, + [GCC_NSS_TBU_CLK ] = &gcc_nss_tbu_clk.clkr, + [GCC_MEM_NOC_NSSNOC_CLK ] = &gcc_mem_noc_nssnoc_clk.clkr, + [LPASS_AXIM_CLK_SRC ] = &lpass_axim_clk_src.clkr, + [LPASS_SWAY_CLK_SRC ] = &lpass_sway_clk_src.clkr, + [ADSS_PWM_CLK_SRC ] = &adss_pwm_clk_src.clkr, + [GCC_ADSS_PWM_CLK ] = &gcc_adss_pwm_clk.clkr, + [GP1_CLK_SRC ] = &gp1_clk_src.clkr, + [GP2_CLK_SRC ] = &gp2_clk_src.clkr, + [GP3_CLK_SRC ] = &gp3_clk_src.clkr, + [GCC_XO_CLK_SRC ] = &gcc_xo_clk_src.clkr, + [GCC_NSSNOC_XO_DCD_CLK ] = &gcc_nssnoc_xo_dcd_clk.clkr, + [GCC_XO_CLK ] = &gcc_xo_clk.clkr, + [GCC_NSSNOC_QOSGEN_REF_CLK ] = &gcc_nssnoc_qosgen_ref_clk.clkr, + [GCC_NSSNOC_TIMEOUT_REF_CLK ] = &gcc_nssnoc_timeout_ref_clk.clkr, + [GCC_XO_DIV4_CLK ] = &gcc_xo_div4_clk.clkr, + [GCC_UNIPHY0_SYS_CLK ] = &gcc_uniphy0_sys_clk.clkr, + [GCC_UNIPHY1_SYS_CLK ] = &gcc_uniphy1_sys_clk.clkr, + [GCC_UNIPHY2_SYS_CLK ] = &gcc_uniphy2_sys_clk.clkr, + [GCC_CMN_12GPLL_SYS_CLK ] = &gcc_cmn_12gpll_sys_clk.clkr, + [GCC_Q6SS_BOOT_CLK ] = &gcc_q6ss_boot_clk.clkr, + [UNIPHY_SYS_CLK_SRC ] = &uniphy_sys_clk_src.clkr, + [NSS_TS_CLK_SRC ] = &nss_ts_clk_src.clkr, + [GCC_ANOC_PCIE0_1LANE_M_CLK ] = &gcc_anoc_pcie0_1lane_m_clk.clkr, + [GCC_ANOC_PCIE1_1LANE_M_CLK ] = &gcc_anoc_pcie1_1lane_m_clk.clkr, + [GCC_ANOC_PCIE2_2LANE_M_CLK ] = &gcc_anoc_pcie2_2lane_m_clk.clkr, + [GCC_ANOC_PCIE3_2LANE_M_CLK ] = &gcc_anoc_pcie3_2lane_m_clk.clkr, + [GCC_SNOC_PCIE0_1LANE_S_CLK ] = &gcc_snoc_pcie0_1lane_s_clk.clkr, + [GCC_SNOC_PCIE1_1LANE_S_CLK ] = &gcc_snoc_pcie1_1lane_s_clk.clkr, + [GCC_SNOC_PCIE2_2LANE_S_CLK ] = &gcc_snoc_pcie2_2lane_s_clk.clkr, + [GCC_SNOC_PCIE3_2LANE_S_CLK ] = &gcc_snoc_pcie3_2lane_s_clk.clkr, + [GCC_PCNOC_DCC_CLK ] = &gcc_pcnoc_dcc_clk.clkr, +}; + +static struct clk_regmap *gcc_ipq9574_dummy_clks[] = { + [GPLL0_MAIN ] =DEFINE_DUMMY_CLK (gpll0_main), + [GPLL0 ] =DEFINE_DUMMY_CLK (gpll0), + [GPLL4_MAIN ] =DEFINE_DUMMY_CLK (gpll4_main), + [GPLL4 ] =DEFINE_DUMMY_CLK (gpll4), + [GPLL2_MAIN ] =DEFINE_DUMMY_CLK (gpll2_main), + [GPLL2 ] =DEFINE_DUMMY_CLK (gpll2), + [GCC_SLEEP_CLK_SRC ] =DEFINE_DUMMY_CLK (gcc_sleep_clk_src), + [APSS_AHB_CLK_SRC ] =DEFINE_DUMMY_CLK (apss_ahb_clk_src), + [APSS_AXI_CLK_SRC ] =DEFINE_DUMMY_CLK (apss_axi_clk_src), + [BLSP1_QUP1_I2C_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_qup1_i2c_apps_clk_src), + [BLSP1_QUP1_SPI_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_qup1_spi_apps_clk_src), + [BLSP1_QUP2_I2C_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_qup2_i2c_apps_clk_src), + [BLSP1_QUP2_SPI_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_qup2_spi_apps_clk_src), + [BLSP1_QUP3_I2C_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_qup3_i2c_apps_clk_src), + [BLSP1_QUP3_SPI_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_qup3_spi_apps_clk_src), + [BLSP1_QUP4_I2C_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_qup4_i2c_apps_clk_src), + [BLSP1_QUP4_SPI_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_qup4_spi_apps_clk_src), + [BLSP1_QUP5_I2C_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_qup5_i2c_apps_clk_src), + [BLSP1_QUP5_SPI_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_qup5_spi_apps_clk_src), + [BLSP1_QUP6_I2C_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_qup6_i2c_apps_clk_src), + [BLSP1_QUP6_SPI_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_qup6_spi_apps_clk_src), + [BLSP1_UART1_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_uart1_apps_clk_src), + [BLSP1_UART2_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_uart2_apps_clk_src), + [BLSP1_UART3_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_uart3_apps_clk_src), + [BLSP1_UART4_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_uart4_apps_clk_src), + [BLSP1_UART5_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_uart5_apps_clk_src), + [BLSP1_UART6_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_uart6_apps_clk_src), + [GCC_APSS_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_apss_ahb_clk), + [GCC_APSS_AXI_CLK ] =DEFINE_DUMMY_CLK (gcc_apss_axi_clk), + [GCC_BLSP1_QUP1_I2C_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_qup1_i2c_apps_clk), + [GCC_BLSP1_QUP1_SPI_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_qup1_spi_apps_clk), + [GCC_BLSP1_QUP2_I2C_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_qup2_i2c_apps_clk), + [GCC_BLSP1_QUP2_SPI_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_qup2_spi_apps_clk), + [GCC_BLSP1_QUP3_I2C_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_qup3_i2c_apps_clk), + [GCC_BLSP1_QUP3_SPI_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_qup3_spi_apps_clk), + [GCC_BLSP1_QUP4_I2C_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_qup4_i2c_apps_clk), + [GCC_BLSP1_QUP4_SPI_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_qup4_spi_apps_clk), + [GCC_BLSP1_QUP5_I2C_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_qup5_i2c_apps_clk), + [GCC_BLSP1_QUP5_SPI_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_qup5_spi_apps_clk), + [GCC_BLSP1_QUP6_I2C_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_qup6_i2c_apps_clk), + [GCC_BLSP1_QUP6_SPI_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_qup6_spi_apps_clk), + [GCC_BLSP1_UART1_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_uart1_apps_clk), + [GCC_BLSP1_UART2_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_uart2_apps_clk), + [GCC_BLSP1_UART3_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_uart3_apps_clk), + [GCC_BLSP1_UART4_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_uart4_apps_clk), + [GCC_BLSP1_UART5_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_uart5_apps_clk), + [GCC_BLSP1_UART6_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_uart6_apps_clk), + [PCIE0_AXI_M_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie0_axi_m_clk_src), + [GCC_PCIE0_AXI_M_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie0_axi_m_clk), + [PCIE1_AXI_M_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie1_axi_m_clk_src), + [GCC_PCIE1_AXI_M_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie1_axi_m_clk), + [PCIE2_AXI_M_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie2_axi_m_clk_src), + [GCC_PCIE2_AXI_M_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie2_axi_m_clk), + [PCIE3_AXI_M_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie3_axi_m_clk_src), + [GCC_PCIE3_AXI_M_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie3_axi_m_clk), + [PCIE0_AXI_S_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie0_axi_s_clk_src), + [GCC_PCIE0_AXI_S_BRIDGE_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie0_axi_s_bridge_clk), + [GCC_PCIE0_AXI_S_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie0_axi_s_clk), + [PCIE1_AXI_S_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie1_axi_s_clk_src), + [GCC_PCIE1_AXI_S_BRIDGE_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie1_axi_s_bridge_clk), + [GCC_PCIE1_AXI_S_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie1_axi_s_clk), + [PCIE2_AXI_S_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie2_axi_s_clk_src), + [GCC_PCIE2_AXI_S_BRIDGE_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie2_axi_s_bridge_clk), + [GCC_PCIE2_AXI_S_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie2_axi_s_clk), + [PCIE3_AXI_S_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie3_axi_s_clk_src), + [GCC_PCIE3_AXI_S_BRIDGE_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie3_axi_s_bridge_clk), + [GCC_PCIE3_AXI_S_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie3_axi_s_clk), + [PCIE0_PIPE_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie0_pipe_clk_src), + [PCIE1_PIPE_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie1_pipe_clk_src), + [PCIE2_PIPE_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie2_pipe_clk_src), + [PCIE3_PIPE_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie3_pipe_clk_src), + [PCIE_AUX_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie_aux_clk_src), + [GCC_PCIE0_AUX_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie0_aux_clk), + [GCC_PCIE1_AUX_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie1_aux_clk), + [GCC_PCIE2_AUX_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie2_aux_clk), + [GCC_PCIE3_AUX_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie3_aux_clk), + [PCIE0_RCHNG_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie0_rchng_clk_src), + [GCC_PCIE0_RCHNG_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie0_rchng_clk), + [PCIE1_RCHNG_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie1_rchng_clk_src), + [GCC_PCIE1_RCHNG_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie1_rchng_clk), + [PCIE2_RCHNG_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie2_rchng_clk_src), + [GCC_PCIE2_RCHNG_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie2_rchng_clk), + [PCIE3_RCHNG_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie3_rchng_clk_src), + [GCC_PCIE3_RCHNG_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie3_rchng_clk), + [GCC_PCIE0_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie0_ahb_clk), + [GCC_PCIE1_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie1_ahb_clk), + [GCC_PCIE2_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie2_ahb_clk), + [GCC_PCIE3_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie3_ahb_clk), + [USB0_AUX_CLK_SRC ] =DEFINE_DUMMY_CLK (usb0_aux_clk_src), + [GCC_USB0_AUX_CLK ] =DEFINE_DUMMY_CLK (gcc_usb0_aux_clk), + [USB0_MASTER_CLK_SRC ] =DEFINE_DUMMY_CLK (usb0_master_clk_src), + [GCC_USB0_MASTER_CLK ] =DEFINE_DUMMY_CLK (gcc_usb0_master_clk), + [GCC_SNOC_USB_CLK ] =DEFINE_DUMMY_CLK (gcc_snoc_usb_clk), + [GCC_ANOC_USB_AXI_CLK ] =DEFINE_DUMMY_CLK (gcc_anoc_usb_axi_clk), + [USB0_MOCK_UTMI_CLK_SRC ] =DEFINE_DUMMY_CLK (usb0_mock_utmi_clk_src), + [USB0_MOCK_UTMI_DIV_CLK_SRC ] =DEFINE_DUMMY_CLK (usb0_mock_utmi_div_clk_src), + [GCC_USB0_MOCK_UTMI_CLK ] =DEFINE_DUMMY_CLK (gcc_usb0_mock_utmi_clk), + [USB0_PIPE_CLK_SRC ] =DEFINE_DUMMY_CLK (usb0_pipe_clk_src), + [GCC_USB0_PHY_CFG_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_usb0_phy_cfg_ahb_clk), + [SDCC1_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (sdcc1_apps_clk_src), + [GCC_SDCC1_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_sdcc1_apps_clk), + [SDCC1_ICE_CORE_CLK_SRC ] =DEFINE_DUMMY_CLK (sdcc1_ice_core_clk_src), + [GCC_SDCC1_ICE_CORE_CLK ] =DEFINE_DUMMY_CLK (gcc_sdcc1_ice_core_clk), + [GCC_SDCC1_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_sdcc1_ahb_clk), + [PCNOC_BFDCD_CLK_SRC ] =DEFINE_DUMMY_CLK (pcnoc_bfdcd_clk_src), + [GCC_NSSCFG_CLK ] =DEFINE_DUMMY_CLK (gcc_nsscfg_clk), + [GCC_NSSNOC_NSSCC_CLK ] =DEFINE_DUMMY_CLK (gcc_nssnoc_nsscc_clk), + [GCC_NSSCC_CLK ] =DEFINE_DUMMY_CLK (gcc_nsscc_clk), + [GCC_NSSNOC_PCNOC_1_CLK ] =DEFINE_DUMMY_CLK (gcc_nssnoc_pcnoc_1_clk), + [GCC_QDSS_DAP_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_dap_ahb_clk), + [GCC_QDSS_CFG_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_cfg_ahb_clk), + [GCC_SNOC_PCNOC_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_snoc_pcnoc_ahb_clk), + [GCC_ANOC_PCNOC_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_anoc_pcnoc_ahb_clk), + [GCC_QPIC_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_qpic_ahb_clk), + [GCC_QPIC_CLK ] =DEFINE_DUMMY_CLK (gcc_qpic_clk), + [GCC_BLSP1_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_ahb_clk), + [GCC_MDIO_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_mdio_ahb_clk), + [GCC_PRNG_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_prng_ahb_clk), + [GCC_UNIPHY0_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_uniphy0_ahb_clk), + [GCC_UNIPHY1_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_uniphy1_ahb_clk), + [GCC_UNIPHY2_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_uniphy2_ahb_clk), + [GCC_CMN_12GPLL_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_cmn_12gpll_ahb_clk), + [GCC_CMN_12GPLL_APU_CLK ] =DEFINE_DUMMY_CLK (gcc_cmn_12gpll_apu_clk), + [SYSTEM_NOC_BFDCD_CLK_SRC ] =DEFINE_DUMMY_CLK (system_noc_bfdcd_clk_src), + [GCC_NSSNOC_SNOC_CLK ] =DEFINE_DUMMY_CLK (gcc_nssnoc_snoc_clk), + [GCC_NSSNOC_SNOC_1_CLK ] =DEFINE_DUMMY_CLK (gcc_nssnoc_snoc_1_clk), + [GCC_QDSS_ETR_USB_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_etr_usb_clk), + [GCC_SYS_NOC_AXI_CLK ] =DEFINE_DUMMY_CLK (gcc_sys_noc_axi_clk), + [GCC_ANOC0_AXI_CLK ] =DEFINE_DUMMY_CLK (gcc_anoc0_axi_clk), + [GCC_ANOC1_AXI_CLK ] =DEFINE_DUMMY_CLK (gcc_anoc1_axi_clk), + [GCC_ANOC0_TBU_CLK ] =DEFINE_DUMMY_CLK (gcc_anoc0_tbu_clk), + [GCC_ANOC1_TBU_CLK ] =DEFINE_DUMMY_CLK (gcc_anoc1_tbu_clk), + [GCC_MEM_NOC_SNOC_AXI_CLK ] =DEFINE_DUMMY_CLK (gcc_mem_noc_snoc_axi_clk), + [GCC_IMEM_AXI_CLK ] =DEFINE_DUMMY_CLK (gcc_imem_axi_clk), + [WCSS_AHB_CLK_SRC ] =DEFINE_DUMMY_CLK (wcss_ahb_clk_src), + [GCC_Q6_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_q6_ahb_clk), + [GCC_Q6_AHB_S_CLK ] =DEFINE_DUMMY_CLK (gcc_q6_ahb_s_clk), + [GCC_WCSS_ECAHB_CLK ] =DEFINE_DUMMY_CLK (gcc_wcss_ecahb_clk), + [GCC_WCSS_ACMT_CLK ] =DEFINE_DUMMY_CLK (gcc_wcss_acmt_clk), + [GCC_SYS_NOC_WCSS_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_sys_noc_wcss_ahb_clk), + [WCSS_AXI_M_CLK_SRC ] =DEFINE_DUMMY_CLK (wcss_axi_m_clk_src), + [GCC_ANOC_WCSS_AXI_M_CLK ] =DEFINE_DUMMY_CLK (gcc_anoc_wcss_axi_m_clk), + [QDSS_AT_CLK_SRC ] =DEFINE_DUMMY_CLK (qdss_at_clk_src), + [GCC_Q6SS_ATBM_CLK ] =DEFINE_DUMMY_CLK (gcc_q6ss_atbm_clk), + [GCC_WCSS_DBG_IFC_ATB_CLK ] =DEFINE_DUMMY_CLK (gcc_wcss_dbg_ifc_atb_clk), + [GCC_NSSNOC_ATB_CLK ] =DEFINE_DUMMY_CLK (gcc_nssnoc_atb_clk), + [GCC_QDSS_AT_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_at_clk), + [GCC_SYS_NOC_AT_CLK ] =DEFINE_DUMMY_CLK (gcc_sys_noc_at_clk), + [GCC_PCNOC_AT_CLK ] =DEFINE_DUMMY_CLK (gcc_pcnoc_at_clk), + [GCC_USB0_EUD_AT_CLK ] =DEFINE_DUMMY_CLK (gcc_usb0_eud_at_clk), + [GCC_QDSS_EUD_AT_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_eud_at_clk), + [QDSS_STM_CLK_SRC ] =DEFINE_DUMMY_CLK (qdss_stm_clk_src), + [GCC_QDSS_STM_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_stm_clk), + [GCC_SYS_NOC_QDSS_STM_AXI_CLK ] =DEFINE_DUMMY_CLK (gcc_sys_noc_qdss_stm_axi_clk), + [QDSS_TRACECLKIN_CLK_SRC ] =DEFINE_DUMMY_CLK (qdss_traceclkin_clk_src), + [GCC_QDSS_TRACECLKIN_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_traceclkin_clk), + [QDSS_TSCTR_CLK_SRC ] =DEFINE_DUMMY_CLK (qdss_tsctr_clk_src), + [GCC_Q6_TSCTR_1TO2_CLK ] =DEFINE_DUMMY_CLK (gcc_q6_tsctr_1to2_clk), + [GCC_WCSS_DBG_IFC_NTS_CLK ] =DEFINE_DUMMY_CLK (gcc_wcss_dbg_ifc_nts_clk), + [GCC_QDSS_TSCTR_DIV2_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_tsctr_div2_clk), + [GCC_QDSS_TS_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_ts_clk), + [GCC_SNOC_TS_CLK ] =DEFINE_DUMMY_CLK (gcc_snoc_ts_clk), + [GCC_MEM_NOC_TS_CLK ] =DEFINE_DUMMY_CLK (gcc_mem_noc_ts_clk), + [GCC_QDSS_TSCTR_DIV4_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_tsctr_div4_clk), + [GCC_NSS_TS_CLK ] =DEFINE_DUMMY_CLK (gcc_nss_ts_clk), + [GCC_QDSS_TSCTR_DIV8_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_tsctr_div8_clk), + [GCC_PCNOC_TS_CLK ] =DEFINE_DUMMY_CLK (gcc_pcnoc_ts_clk), + [GCC_QDSS_TSCTR_DIV16_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_tsctr_div16_clk), + [GCC_Q6SS_PCLKDBG_CLK ] =DEFINE_DUMMY_CLK (gcc_q6ss_pclkdbg_clk), + [GCC_Q6SS_TRIG_CLK ] =DEFINE_DUMMY_CLK (gcc_q6ss_trig_clk), + [GCC_WCSS_DBG_IFC_APB_CLK ] =DEFINE_DUMMY_CLK (gcc_wcss_dbg_ifc_apb_clk), + [GCC_WCSS_DBG_IFC_DAPBUS_CLK ] =DEFINE_DUMMY_CLK (gcc_wcss_dbg_ifc_dapbus_clk), + [GCC_QDSS_DAP_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_dap_clk), + [GCC_QDSS_APB2JTAG_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_apb2jtag_clk), + [GCC_QDSS_TSCTR_DIV3_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_tsctr_div3_clk), + [QPIC_IO_MACRO_CLK_SRC ] =DEFINE_DUMMY_CLK (qpic_io_macro_clk_src), + [GCC_QPIC_IO_MACRO_CLK ] =DEFINE_DUMMY_CLK (gcc_qpic_io_macro_clk), + [Q6_AXI_CLK_SRC ] =DEFINE_DUMMY_CLK (q6_axi_clk_src), + [GCC_Q6_AXIM_CLK ] =DEFINE_DUMMY_CLK (gcc_q6_axim_clk), + [GCC_WCSS_Q6_TBU_CLK ] =DEFINE_DUMMY_CLK (gcc_wcss_q6_tbu_clk), + [GCC_MEM_NOC_Q6_AXI_CLK ] =DEFINE_DUMMY_CLK (gcc_mem_noc_q6_axi_clk), + [Q6_AXIM2_CLK_SRC ] =DEFINE_DUMMY_CLK (q6_axim2_clk_src), + [NSSNOC_MEMNOC_BFDCD_CLK_SRC ] =DEFINE_DUMMY_CLK (nssnoc_memnoc_bfdcd_clk_src), + [GCC_NSSNOC_MEMNOC_CLK ] =DEFINE_DUMMY_CLK (gcc_nssnoc_memnoc_clk), + [GCC_NSSNOC_MEM_NOC_1_CLK ] =DEFINE_DUMMY_CLK (gcc_nssnoc_mem_noc_1_clk), + [GCC_NSS_TBU_CLK ] =DEFINE_DUMMY_CLK (gcc_nss_tbu_clk), + [GCC_MEM_NOC_NSSNOC_CLK ] =DEFINE_DUMMY_CLK (gcc_mem_noc_nssnoc_clk), + [LPASS_AXIM_CLK_SRC ] =DEFINE_DUMMY_CLK (lpass_axim_clk_src), + [LPASS_SWAY_CLK_SRC ] =DEFINE_DUMMY_CLK (lpass_sway_clk_src), + [ADSS_PWM_CLK_SRC ] =DEFINE_DUMMY_CLK (adss_pwm_clk_src), + [GCC_ADSS_PWM_CLK ] =DEFINE_DUMMY_CLK (gcc_adss_pwm_clk), + [GP1_CLK_SRC ] =DEFINE_DUMMY_CLK (gp1_clk_src), + [GP2_CLK_SRC ] =DEFINE_DUMMY_CLK (gp2_clk_src), + [GP3_CLK_SRC ] =DEFINE_DUMMY_CLK (gp3_clk_src), + [DDRSS_SMS_SLOW_CLK_SRC ] =DEFINE_DUMMY_CLK (ddrss_sms_slow_clk_src), + [GCC_XO_CLK_SRC ] =DEFINE_DUMMY_CLK (gcc_xo_clk_src), + [GCC_NSSNOC_XO_DCD_CLK ] =DEFINE_DUMMY_CLK (gcc_nssnoc_xo_dcd_clk), + [GCC_XO_CLK ] =DEFINE_DUMMY_CLK (gcc_xo_clk), + [GCC_NSSNOC_QOSGEN_REF_CLK ] =DEFINE_DUMMY_CLK (gcc_nssnoc_qosgen_ref_clk), + [GCC_NSSNOC_TIMEOUT_REF_CLK ] =DEFINE_DUMMY_CLK (gcc_nssnoc_timeout_ref_clk), + [GCC_XO_DIV4_CLK ] =DEFINE_DUMMY_CLK (gcc_xo_div4_clk), + [GCC_UNIPHY0_SYS_CLK ] =DEFINE_DUMMY_CLK (gcc_uniphy0_sys_clk), + [GCC_UNIPHY1_SYS_CLK ] =DEFINE_DUMMY_CLK (gcc_uniphy1_sys_clk), + [GCC_UNIPHY2_SYS_CLK ] =DEFINE_DUMMY_CLK (gcc_uniphy2_sys_clk), + [GCC_CMN_12GPLL_SYS_CLK ] =DEFINE_DUMMY_CLK (gcc_cmn_12gpll_sys_clk), + [GCC_Q6SS_BOOT_CLK ] =DEFINE_DUMMY_CLK (gcc_q6ss_boot_clk), + [UNIPHY_SYS_CLK_SRC ] =DEFINE_DUMMY_CLK (uniphy_sys_clk_src), + [NSS_TS_CLK_SRC ] =DEFINE_DUMMY_CLK (nss_ts_clk_src),
drivers/clk/qcom/gcc-ipq9574.c line 4472
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ [GCC_ANOC_PCIE0_1LANE_M_CLK] = DEFINE_DUMMY_CLK(gcc_anoc_pcie0_1lane_m_clk), + [GCC_ANOC_PCIE1_1LANE_M_CLK] = DEFINE_DUMMY_CLK(gcc_anoc_pcie1_1lane_m_clk), + [GCC_ANOC_PCIE2_2LANE_M_CLK] = DEFINE_DUMMY_CLK(gcc_anoc_pcie2_2lane_m_clk), + [GCC_ANOC_PCIE3_2LANE_M_CLK] = DEFINE_DUMMY_CLK(gcc_anoc_pcie3_2lane_m_clk), + [GCC_SNOC_PCIE0_1LANE_S_CLK] = DEFINE_DUMMY_CLK(gcc_snoc_pcie0_1lane_s_clk), + [GCC_SNOC_PCIE1_1LANE_S_CLK] = DEFINE_DUMMY_CLK(gcc_snoc_pcie1_1lane_s_clk), + [GCC_SNOC_PCIE2_2LANE_S_CLK] = DEFINE_DUMMY_CLK(gcc_snoc_pcie2_2lane_s_clk), + [GCC_SNOC_PCIE3_2LANE_S_CLK] = DEFINE_DUMMY_CLK(gcc_snoc_pcie3_2lane_s_clk), + [GCC_PCNOC_DCC_CLK] = DEFINE_DUMMY_CLK(gcc_pcnoc_dcc_clk), +};
Drop.
Quoted 197 lines
drivers/clk/qcom/gcc-ipq9574.c new file +197
-0+ +static const struct qcom_reset_map gcc_ipq9574_resets[] = { + [GCC_ADSS_BCR ] = {0x1c000 ,0 }, + [GCC_ANOC0_TBU_BCR ] = {0x1203C ,0 }, + [GCC_ANOC1_TBU_BCR ] = {0x1204C ,0 }, + [GCC_ANOC_BCR ] = {0x2E074 ,0 }, + [GCC_APC0_VOLTAGE_DROOP_DETECTOR_BCR ] = {0x38000 ,0 }, + [GCC_APSS_TCU_BCR ] = {0x12014 ,0 }, + [GCC_BLSP1_BCR ] = {0x01000 ,0 }, + [GCC_BLSP1_QUP1_BCR ] = {0x02000 ,0 }, + [GCC_BLSP1_QUP2_BCR ] = {0x03000 ,0 }, + [GCC_BLSP1_QUP3_BCR ] = {0x04000 ,0 }, + [GCC_BLSP1_QUP4_BCR ] = {0x05000 ,0 }, + [GCC_BLSP1_QUP5_BCR ] = {0x06000 ,0 }, + [GCC_BLSP1_QUP6_BCR ] = {0x07000 ,0 }, + [GCC_BLSP1_UART1_BCR ] = {0x02028 ,0 }, + [GCC_BLSP1_UART2_BCR ] = {0x03028 ,0 }, + [GCC_BLSP1_UART3_BCR ] = {0x04028 ,0 }, + [GCC_BLSP1_UART4_BCR ] = {0x05028 ,0 }, + [GCC_BLSP1_UART5_BCR ] = {0x06028 ,0 }, + [GCC_BLSP1_UART6_BCR ] = {0x07028 ,0 }, + [GCC_BOOT_ROM_BCR ] = {0x13028 ,0 }, + [GCC_CMN_BLK_BCR ] = {0x3A000 ,0 }, + [GCC_CMN_BLK_AHB_ARES ] = {0x3A010 ,0 }, + [GCC_CMN_BLK_SYS_ARES ] = {0x3A010 ,1 }, + [GCC_CMN_BLK_APU_ARES ] = {0x3A010 ,2 }, + [GCC_DCC_BCR ] = {0x35000 ,0 }, + [GCC_DDRSS_BCR ] = {0x11000 ,0 }, + [GCC_IMEM_BCR ] = {0x0e000 ,0 }, + [GCC_LPASS_BCR ] = {0x27000 ,0 }, + [GCC_MDIO_BCR ] = {0x1703c ,0 }, + [GCC_MPM_BCR ] = {0x37000 ,0 }, + [GCC_MSG_RAM_BCR ] = {0x26000 ,0 }, + [GCC_NSS_BCR ] = {0x17000 ,0 }, + [GCC_NSS_TBU_BCR ] = {0x12044 ,0 }, + [GCC_NSSNOC_MEMNOC_1_ARES ] = {0x17038 ,13 }, + [GCC_NSSNOC_PCNOC_1_ARES ] = {0x17038 ,12 }, + [GCC_NSSNOC_SNOC_1_ARES ] = {0x17038 ,11 }, + [GCC_NSSNOC_XO_DCD_ARES ] = {0x17038 ,10 }, + [GCC_NSSNOC_TS_ARES ] = {0x17038 ,9 }, + [GCC_NSSCC_ARES ] = {0x17038 ,8 }, + [GCC_NSSNOC_NSSCC_ARES ] = {0x17038 ,7 }, + [GCC_NSSNOC_ATB_ARES ] = {0x17038 ,6 }, + [GCC_NSSNOC_MEMNOC_ARES ] = {0x17038 ,5 }, + [GCC_NSSNOC_QOSGEN_REF_ARES ] = {0x17038 ,4 }, + [GCC_NSSNOC_SNOC_ARES ] = {0x17038 ,3 }, + [GCC_NSSNOC_TIMEOUT_REF_ARES ] = {0x17038 ,2 }, + [GCC_NSS_CFG_ARES ] = {0x17038 ,1 }, + [GCC_UBI0_DBG_ARES ] = {0x17038 ,0 }, + [GCC_PCIE0PHY_PHY_BCR ] = {0x2805c ,0 }, + [GCC_PCIE0_AHB_ARES ] = {0x28058 ,7 }, + [GCC_PCIE0_AUX_ARES ] = {0x28058 ,6 }, + [GCC_PCIE0_AXI_M_ARES ] = {0x28058 ,5 }, + [GCC_PCIE0_AXI_M_STICKY_ARES ] = {0x28058 ,4 }, + [GCC_PCIE0_AXI_S_ARES ] = {0x28058 ,3 }, + [GCC_PCIE0_AXI_S_STICKY_ARES ] = {0x28058 ,2 }, + [GCC_PCIE0_CORE_STICKY_ARES ] = {0x28058 ,1 }, + [GCC_PCIE0_PIPE_ARES ] = {0x28058 ,0 }, + [GCC_PCIE1_AHB_ARES ] = {0x29058 ,7 }, + [GCC_PCIE1_AUX_ARES ] = {0x29058 ,6 }, + [GCC_PCIE1_AXI_M_ARES ] = {0x29058 ,5 }, + [GCC_PCIE1_AXI_M_STICKY_ARES ] = {0x29058 ,4 }, + [GCC_PCIE1_AXI_S_ARES ] = {0x29058 ,3 }, + [GCC_PCIE1_AXI_S_STICKY_ARES ] = {0x29058 ,2 }, + [GCC_PCIE1_CORE_STICKY_ARES ] = {0x29058 ,1 }, + [GCC_PCIE1_PIPE_ARES ] = {0x29058 ,0 }, + [GCC_PCIE2_AHB_ARES ] = {0x2A058 ,7 }, + [GCC_PCIE2_AUX_ARES ] = {0x2A058 ,6 }, + [GCC_PCIE2_AXI_M_ARES ] = {0x2A058 ,5 }, + [GCC_PCIE2_AXI_M_STICKY_ARES ] = {0x2A058 ,4 }, + [GCC_PCIE2_AXI_S_ARES ] = {0x2A058 ,3 }, + [GCC_PCIE2_AXI_S_STICKY_ARES ] = {0x2A058 ,2 }, + [GCC_PCIE2_CORE_STICKY_ARES ] = {0x2A058 ,1 }, + [GCC_PCIE2_PIPE_ARES ] = {0x2A058 ,0 }, + [GCC_PCIE3_AHB_ARES ] = {0x2B058 ,7 }, + [GCC_PCIE3_AUX_ARES ] = {0x2B058 ,6 }, + [GCC_PCIE3_AXI_M_ARES ] = {0x2B058 ,5 }, + [GCC_PCIE3_AXI_M_STICKY_ARES ] = {0x2B058 ,4 }, + [GCC_PCIE3_AXI_S_ARES ] = {0x2B058 ,3 }, + [GCC_PCIE3_AXI_S_STICKY_ARES ] = {0x2B058 ,2 }, + [GCC_PCIE3_CORE_STICKY_ARES ] = {0x2B058 ,1 }, + [GCC_PCIE3_PIPE_ARES ] = {0x2B058 ,0 }, + [GCC_PCIE0_BCR ] = {0x28000 ,0 }, + [GCC_PCIE0_LINK_DOWN_BCR ] = {0x28054 ,0 }, + [GCC_PCIE0_PHY_BCR ] = {0x28060 ,0 }, + [GCC_PCIE1_BCR ] = {0x29000 ,0 }, + [GCC_PCIE1_LINK_DOWN_BCR ] = {0x29054 ,0 }, + [GCC_PCIE1_PHY_BCR ] = {0x29060 ,0 }, + [GCC_PCIE1PHY_PHY_BCR ] = {0x2905c ,0 }, + [GCC_PCIE2_BCR ] = {0x2a000 ,0 }, + [GCC_PCIE2_LINK_DOWN_BCR ] = {0x2a054 ,0 }, + [GCC_PCIE2_PHY_BCR ] = {0x2a060 ,0 }, + [GCC_PCIE2PHY_PHY_BCR ] = {0x2a05c ,0 }, + [GCC_PCIE3_BCR ] = {0x2b000 ,0 }, + [GCC_PCIE3_LINK_DOWN_BCR ] = {0x2b054 ,0 }, + [GCC_PCIE3PHY_PHY_BCR ] = {0x2b05c ,0 }, + [GCC_PCIE3_PHY_BCR ] = {0x2B060 ,0 }, + [GCC_PCNOC_BCR ] = {0x31000 ,0 }, + [GCC_PCNOC_BUS_TIMEOUT0_BCR ] = {0x31030 ,0 }, + [GCC_PCNOC_BUS_TIMEOUT1_BCR ] = {0x31038 ,0 }, + [GCC_PCNOC_BUS_TIMEOUT2_BCR ] = {0x31040 ,0 }, + [GCC_PCNOC_BUS_TIMEOUT3_BCR ] = {0x31048 ,0 }, + [GCC_PCNOC_BUS_TIMEOUT4_BCR ] = {0x31050 ,0 }, + [GCC_PCNOC_BUS_TIMEOUT5_BCR ] = {0x31058 ,0 }, + [GCC_PCNOC_BUS_TIMEOUT6_BCR ] = {0x31060 ,0 }, + [GCC_PCNOC_BUS_TIMEOUT7_BCR ] = {0x31068 ,0 }, + [GCC_PCNOC_BUS_TIMEOUT8_BCR ] = {0x31070 ,0 }, + [GCC_PCNOC_BUS_TIMEOUT9_BCR ] = {0x31078 ,0 }, + [GCC_PCNOC_TBU_BCR ] = {0x12034 ,0 }, + [GCC_PRNG_BCR ] = {0x13020 ,0 }, + [GCC_Q6SS_DBG_ARES ] = {0x2506C ,4 }, + [GCC_Q6_AHB_ARES ] = {0x2506C ,3 }, + [GCC_Q6_AHB_S_ARES ] = {0x2506C ,2 }, + [GCC_Q6_AXIM2_ARES ] = {0x2506C ,1 }, + [GCC_Q6_AXIM_ARES ] = {0x2506C ,0 }, + [GCC_QDSS_BCR ] = {0x2d000 ,0 }, + [GCC_QPIC_BCR ] = {0x32000 ,0 }, + [GCC_QPIC_AHB_ARES ] = {0x3201c ,1 }, + [GCC_QPIC_ARES ] = {0x3201c ,0 }, + [GCC_QUSB2_0_PHY_BCR ] = {0x2c068 ,0 }, + [GCC_RBCPR_BCR ] = {0x39000 ,0 }, + [GCC_RBCPR_MX_BCR ] = {0x39014 ,0 }, + [GCC_SDCC_BCR ] = {0x33000 ,0 }, + [GCC_SEC_CTRL_BCR ] = {0x1a000 ,0 }, + [GCC_SMMU_CFG_BCR ] = {0x1202c ,0 }, + [GCC_SNOC_BCR ] = {0x2E000 ,0 }, + [GCC_SPDM_BCR ] = {0x36000 ,0 }, + [GCC_TCSR_BCR ] = {0x3d000 ,0 }, + [GCC_TLMM_BCR ] = {0x3e000 ,0 }, + [GCC_TME_BCR ] = {0x10000 ,0 }, + [GCC_UNIPHY0_BCR ] = {0x17044 ,0 }, + [GCC_UNIPHY0_SYS_RESET ] = {0x17050 ,0 }, + [GCC_UNIPHY0_AHB_RESET ] = {0x17050 ,1 }, + [GCC_UNIPHY0_XPCS_RESET ] = {0x17050 ,2 }, + [GCC_UNIPHY1_SYS_RESET ] = {0x17060 ,0 }, + [GCC_UNIPHY1_AHB_RESET ] = {0x17060 ,1 }, + [GCC_UNIPHY1_XPCS_RESET ] = {0x17060 ,2 }, + [GCC_UNIPHY2_SYS_RESET ] = {0x17070 ,0 }, + [GCC_UNIPHY2_AHB_RESET ] = {0x17070 ,1 }, + [GCC_UNIPHY2_XPCS_RESET ] = {0x17070 ,2 }, + [GCC_UNIPHY1_BCR ] = {0x17054 ,0 }, + [GCC_UNIPHY2_BCR ] = {0x17064 ,0 }, + [GCC_USB0_PHY_BCR ] = {0x2c06c ,0 }, + [GCC_USB3PHY_0_PHY_BCR ] = {0x2c070 ,0 }, + [GCC_USB_BCR ] = {0x2c000 ,0 }, + [GCC_USB_MISC_RESET ] = {0x2c064 ,0 }, + [GCC_WCSSAON_RESET ] = {0x25074 ,0 }, + [GCC_WCSS_ACMT_ARES ] = {0x25070 ,5 }, + [GCC_WCSS_AHB_S_ARES ] = {0x25070 ,4 }, + [GCC_WCSS_AXI_M_ARES ] = {0x25070 ,3 }, + [GCC_WCSS_BCR ] = {0x18004 ,0 }, + [GCC_WCSS_DBG_ARES ] = {0x25070 ,2 }, + [GCC_WCSS_DBG_BDG_ARES ] = {0x25070 ,1 }, + [GCC_WCSS_ECAHB_ARES ] = {0x25070 ,0 }, + [GCC_WCSS_Q6_BCR ] = {0x18000 ,0 }, + [GCC_WCSS_Q6_TBU_BCR ] = {0x12054 ,0 }, +}; + +static const struct of_device_id gcc_ipq9574_match_table[] = { + { .compatible ="qcom,gcc-ipq9574" }, + { } +}; +MODULE_DEVICE_TABLE (of, gcc_ipq9574_match_table); + +static const struct regmap_config gcc_ipq9574_regmap_config = { + .reg_bits =32 , + .reg_stride =4 , + .val_bits =32 , + .max_register =0x7fffc , + .fast_io = true, +}; + +static const struct qcom_cc_desc gcc_ipq9574_desc = { + .config = &gcc_ipq9574_regmap_config, + .clks = gcc_ipq9574_clks, + .num_clks =ARRAY_SIZE (gcc_ipq9574_clks), + .resets = gcc_ipq9574_resets, + .num_resets =ARRAY_SIZE (gcc_ipq9574_resets), + .clk_hws = gcc_ipq9574_hws, + .num_clk_hws =ARRAY_SIZE (gcc_ipq9574_hws), +}; + +static const struct qcom_cc_desc gcc_ipq9574_dummy_desc = { + .config = &gcc_ipq9574_regmap_config, + .clks = gcc_ipq9574_dummy_clks, + .num_clks =ARRAY_SIZE (gcc_ipq9574_dummy_clks), + .resets = gcc_ipq9574_resets, + .num_resets =ARRAY_SIZE (gcc_ipq9574_resets), +}; + +static int gcc_ipq9574_probe (struct platform_device *pdev) +{ +struct regmap *regmap; +struct qcom_cc_desc ipq9574_desc = gcc_ipq9574_desc; +struct device_node *np = (&pdev->dev)->of_node; + +if (of_property_read_bool (np,"gcc-use-dummy" ))
drivers/clk/qcom/gcc-ipq9574.c line 4679
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ ipq9574_desc = gcc_ipq9574_dummy_desc; + + regmap =qcom_cc_map (pdev, &ipq9574_desc); +if (IS_ERR (regmap)) +return PTR_ERR (regmap); + +return qcom_cc_really_probe (pdev, &ipq9574_desc, regmap); +} + +static int gcc_ipq9574_remove (struct platform_device *pdev)
Generally you shouldn't remove the driver that ensures your platform well, works..
Plus GCCs are always =y in mainline to make sure dependencies are met so there's no removing.
Quoted 27 lines
drivers/clk/qcom/gcc-ipq9574.c new file +27
-0+{ +return 0 ; +} + +static struct platform_driver gcc_ipq9574_driver = { + .probe = gcc_ipq9574_probe, + .remove = gcc_ipq9574_remove, + .driver = { + .name ="qcom,gcc-ipq9574" , + .of_match_table = gcc_ipq9574_match_table, + }, +}; + +static int __init gcc_ipq9574_init (void ) +{ +return platform_driver_register (&gcc_ipq9574_driver); +} +core_initcall (gcc_ipq9574_init); + +static void __exit gcc_ipq9574_exit(void) +{ +platform_driver_unregister (&gcc_ipq9574_driver); +} +module_exit (gcc_ipq9574_exit); + +MODULE_DESCRIPTION ("Qualcomm Technologies, Inc. GCC IPQ9574 Driver" ); +MODULE_LICENSE ("GPL" );
Re: [PATCH 2/7] clk: qcom: Add Global Clock Controller driver for IPQ9574
Quoted 74 lines · Konrad Dybcio
Quoted 49 lines · devi priya
Add Global Clock Controller (GCC) driver for ipq9574 based devices
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Signed-off-by devi priya <[email protected]>--- drivers/clk/qcom/Kconfig | 8 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/gcc-ipq9574.c | 4706 ++++++++++++++++++++++++++++++++ 3 files changed, 4715 insertions(+)create mode 100644
drivers/clk/qcom/gcc-ipq9574.cdrivers/clk/qcom/Kconfig +8
-0@@ -173,6 +173,14 @@ config IPQ_GCC_8074 i2c, USB, SD/eMMC, etc. Select this for the root clock of ipq8074. +config IPQ_GCC_9574 + tristate "IPQ9574 Global Clock Controller" + help + Support for global clock controller on ipq9574 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, etc. Select this for the root clock + of ipq9574. + config MSM_GCC_8660 tristate "MSM8660 Global Clock Controller" helpdrivers/clk/qcom/Makefile +1
-0@@ -27,6 +27,7 @@ obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o obj-$(CONFIG_IPQ_GCC_8074) += gcc-ipq8074.o +obj-$(CONFIG_IPQ_GCC_9574) += gcc-ipq9574.o obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o obj-$(CONFIG_MDM_GCC_9607) += gcc-mdm9607.o obj-$(CONFIG_MDM_GCC_9615) += gcc-mdm9615.odrivers/clk/qcom/gcc-ipq9574.c new file +0
-0drivers/clk/qcom/gcc-ipq9574.c line 1
Quoted 1 line
drivers/clk/qcom/gcc-ipq9574.c new file +1
-0@@ -0,0 +1,4706 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) Hm, interesting choice for a C driver..
Quoted 19 lines
drivers/clk/qcom/gcc-ipq9574.c new file +19
-0+/* +* Copyright (c) 2022 The Linux Foundation. All rights reserved. +*/ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/clk-provider.h> +#include <linux/regmap.h> + +#include <linux/reset-controller.h> +#include <dt-bindings/clock/qcom,gcc-ipq9574.h> +#include <dt-bindings/reset/qcom,gcc-ipq9574.h> + +#include "common.h" +#include "clk-regmap.h"
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 27
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+#include "clk-pll.h" +#include "clk-rcg.h" +#include "clk-branch.h" +#include "clk-alpha-pll.h" +#include "clk-regmap-divider.h" +#include "clk-regmap-mux.h" +#include "reset.h" Many of these includes seem unnecessary..
Sure, will remove
Quoted 5 lines
drivers/clk/qcom/gcc-ipq9574.c line 29
Quoted 4 lines
drivers/clk/qcom/gcc-ipq9574.c new file +2
-0+ +#define F (f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) }Drop.
Okay
Quoted 48 lines
Quoted 48 lines
drivers/clk/qcom/gcc-ipq9574.c new file +47
-0+ +/* Need to match the order of clocks in DT binding */ +enum { +DT_XO , +DT_SLEEP_CLK , +DT_BIAS_PLL_UBI_NC_CLK , +DT_PCIE30_PHY0_PIPE_CLK , +DT_PCIE30_PHY1_PIPE_CLK , +DT_PCIE30_PHY2_PIPE_CLK , +DT_PCIE30_PHY3_PIPE_CLK , +DT_USB3PHY_0_CC_PIPE_CLK , +}; + +enum { +P_XO , +P_PCIE30_PHY0_PIPE , +P_PCIE30_PHY1_PIPE , +P_PCIE30_PHY2_PIPE , +P_PCIE30_PHY3_PIPE , +P_USB3PHY_0_PIPE , +P_GPLL0 , +P_GPLL0_DIV2 , +P_GPLL0_OUT_AUX , +P_GPLL2 , +P_GPLL4 , +P_PI_SLEEP , +P_BIAS_PLL_UBI_NC_CLK , +}; + +static const struct parent_map gcc_xo_map[] = { + {P_XO ,0 }, +}; + +static const struct clk_parent_data gcc_xo_data[] = { + { .index =DT_XO }, +}; + +static const struct clk_parent_data gcc_sleep_clk_data[] = { + { .index =DT_SLEEP_CLK }, +}; + +static struct clk_alpha_pll gpll0_main = { + .offset =0x20000 , + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT ], + .clkr = { + .enable_reg =0x0b000 , + .enable_mask =BIT (0 ),
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 82
Quoted 6 lines
drivers/clk/qcom/gcc-ipq9574.c new file +6
-0+ .hw.init = &(struct clk_init_data) { + .name ="gpll0_main" , + .parent_data = gcc_xo_data, + .num_parents =ARRAY_SIZE (gcc_xo_data), + .ops = &clk_alpha_pll_ops, + .flags =CLK_IS_CRITICAL ,Is it? Does it act as a CPU PLL source that's not managed by the firmware?
Okay, will remove the critical flag as it is managed by the firmware
Quoted 37 lines
Quoted 37 lines
drivers/clk/qcom/gcc-ipq9574.c new file +36
-0+ }, + }, +}; + +static struct clk_fixed_factor gpll0_out_main_div2 = { + .mult =1 , + .div =2 , + .hw.init = &(struct clk_init_data ) { + .name ="gpll0_out_main_div2" , + .parent_hws = (const struct clk_hw *[]) { + &gpll0_main.clkr.hw }, + .num_parents =1 , + .ops = &clk_fixed_factor_ops, + .flags =CLK_SET_RATE_PARENT , + }, +}; + +static struct clk_alpha_pll_postdiv gpll0 = { + .offset =0x20000 , + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT ], + .width =4 , + .clkr.hw.init = &(struct clk_init_data ) { + .name ="gpll0" , + .parent_hws = (const struct clk_hw *[]) { + &gpll0_main.clkr.hw }, + .num_parents =1 , + .ops = &clk_alpha_pll_postdiv_ro_ops, + .flags =CLK_SET_RATE_PARENT , + }, +}; + +static struct clk_alpha_pll gpll4_main = { + .offset =0x22000 , + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT ], + .clkr = { + .enable_reg =0x0b000 ,
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 125
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ .enable_mask = BIT(2), + .hw.init = &(struct clk_init_data ) { + .name ="gpll4_main" , + .parent_data = gcc_xo_data, + .num_parents =ARRAY_SIZE (gcc_xo_data), + .ops = &clk_alpha_pll_ops, + .flags =CLK_IS_CRITICAL ,Again, is it?
okay, will remove
Quoted 14 lines
drivers/clk/qcom/gcc-ipq9574.c line 137
Quoted 13 lines
drivers/clk/qcom/gcc-ipq9574.c new file +12
-0+ }, + }, +}; + +static struct clk_alpha_pll_postdiv gpll4 = { + .offset =0x22000 , + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT ], + .width =4 , + .clkr.hw.init = &(struct clk_init_data ) { + .name ="gpll4" , + .parent_hws = (const struct clk_hw *[]) { + &gpll4_main.clkr.hw },Please put the }, in a new line.
okay
Quoted 48 lines
Quoted 48 lines
drivers/clk/qcom/gcc-ipq9574.c new file +47
-0+ .num_parents = 1, + .ops = &clk_alpha_pll_postdiv_ro_ops, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_alpha_pll gpll2_main = { + .offset =0x21000 , + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT ], + .clkr = { + .enable_reg =0x0b000 , + .enable_mask =BIT (1 ), + .hw.init = &(struct clk_init_data ) { + .name ="gpll2_main" , + .parent_data = gcc_xo_data, + .num_parents =ARRAY_SIZE (gcc_xo_data), + .ops = &clk_alpha_pll_ops, + .flags =CLK_IS_CRITICAL , + }, + }, +}; + +static struct clk_alpha_pll_postdiv gpll2 = { + .offset =0x21000 , + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT ], + .width =4 , + .clkr.hw.init = &(struct clk_init_data ) { + .name ="gpll2" , + .parent_hws = (const struct clk_hw *[]) { + &gpll2_main.clkr.hw }, + .num_parents =1 , + .ops = &clk_alpha_pll_postdiv_ro_ops, + .flags =CLK_SET_RATE_PARENT , + }, +}; + +static struct clk_branch gcc_sleep_clk_src = { + .halt_reg =0x3400c , + .clkr = { + .enable_reg =0x3400c , + .enable_mask =BIT (1 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_sleep_clk_src" , + .parent_data = gcc_sleep_clk_data, + .num_parents =ARRAY_SIZE (gcc_sleep_clk_data), + .ops = &clk_branch2_ops, + .flags =CLK_IS_CRITICAL ,
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 191
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ }, + }, +}; + +static const struct clk_parent_data gcc_xo_gpll0_gpll0_out_main_div2[] = { + { .index =DT_XO }, + { .hw = &gpll0.clkr.hw},Please consistently add a space before },
sure, okay
Quoted 34 lines
Quoted 34 lines
drivers/clk/qcom/gcc-ipq9574.c new file +33
-0+ { .hw = &gpll0_out_main_div2.hw}, +}; + +static const struct parent_map gcc_xo_gpll0_gpll0_out_main_div2_map[] = { + {P_XO ,0 }, + {P_GPLL0 ,1 }, + {P_GPLL0_DIV2 ,4 }, +}; + +static const struct clk_parent_data gcc_xo_gpll0[] = { + { .index =DT_XO }, + { .hw = &gpll0.clkr.hw }, +}; + +static const struct parent_map gcc_xo_gpll0_map[] = { + {P_XO ,0 }, + {P_GPLL0 ,1 }, +}; + +static const struct clk_parent_data gcc_xo_gpll0_gpll4[] = { + { .index =DT_XO }, + { .hw = &gpll0.clkr.hw }, + { .hw = &gpll4.clkr.hw }, +}; + +static const struct parent_map gcc_xo_gpll0_gpll4_map[] = { + {P_XO ,0 }, + {P_GPLL0 ,1 }, + {P_GPLL4 ,2 }, +}; + +static const struct clk_parent_data gcc_xo_gpll0_gpll0_div2_gpll0[] = { + { .index =DT_XO },
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 231
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ { .hw = &gpll0.clkr.hw }, + { .hw = &gpll0_out_main_div2.hw }, + { .hw = &gpll0.clkr.hw }, +}; + +static const struct parent_map +gcc_xo_gpll0_gpll0_div2_gpll0_map[] = {Pretty sure you can unwrap that line
okay
Quoted 11 lines
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c new file +6
-0+ { P_XO, 0 }, + { P_GPLL0, 1 }, + { P_GPLL0_DIV2, 4 }, + { P_GPLL0, 5 }, +}; +[...]
Quoted 12 lines
drivers/clk/qcom/gcc-ipq9574.c line 980
Quoted 11 lines
drivers/clk/qcom/gcc-ipq9574.c new file +11
-0+static struct clk_branch gcc_blsp1_qup6_i2c_apps_clk = { + .halt_reg =0x07024 , + .clkr = { + .enable_reg =0x07024 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_blsp1_qup6_i2c_apps_clk" , + .parent_hws = (const struct clk_hw *[]) { + &blsp1_qup6_i2c_apps_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED ,Sounds very much like a hack..
Got it, will remove the clock entry as it is not being used in linux
Quoted 7 lines
[...]
drivers/clk/qcom/gcc-ipq9574.c line 1873
Quoted 2 lines
drivers/clk/qcom/gcc-ipq9574.c new file +2
-0+static struct clk_branch gcc_snoc_usb_clk = { + .halt_reg =0x2E058 ,Please lowercase hex all throughout the file.
okay
Quoted 29 lines
Quoted 15 lines
drivers/clk/qcom/gcc-ipq9574.c new file +14
-0+ .clkr = { + .enable_reg = 0x2E058, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_snoc_usb_clk" , + .parent_hws = (const struct clk_hw *[]) { + &usb0_master_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_branch2_ops, + }, + }, +}; +[...]
Quoted 12 lines
drivers/clk/qcom/gcc-ipq9574.c new file +12
-0+ +static struct clk_rcg2 pcnoc_bfdcd_clk_src = { + .cmd_rcgr =0x31004 , + .freq_tbl = ftbl_pcnoc_bfdcd_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="pcnoc_bfdcd_clk_src" , + .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + .flags =CLK_IS_CRITICAL ,
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 2073
Quoted 6 lines
drivers/clk/qcom/gcc-ipq9574.c new file +6
-0+ }, +}; + +static struct clk_fixed_factor pcnoc_clk_src = { + .mult =1 , + .div =1 ,Is there any benefit in keeping it instead of providing the real rcg as a parent?
okay, understood..will remove
Quoted 13 lines
Quoted 11 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .hw.init = &(struct clk_init_data) { + .name ="pcnoc_clk_src" , + .parent_hws = (const struct clk_hw *[]) { + &pcnoc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .ops = &clk_fixed_factor_ops, + .flags =CLK_SET_RATE_PARENT , + }, +}; +[...]
Quoted 13 lines
drivers/clk/qcom/gcc-ipq9574.c line 2190
Quoted 11 lines
drivers/clk/qcom/gcc-ipq9574.c new file +11
-0+static struct clk_branch gcc_snoc_pcnoc_ahb_clk = { + .halt_reg =0x2E03C , + .clkr = { + .enable_reg =0x2E03C , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_snoc_pcnoc_ahb_clk" , + .parent_hws = (const struct clk_hw *[]) { + &pcnoc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED ,Can it be turned off? Perhaps
CLK_IS_CRITICALwould be more fitting, with a comment explaining why.
Okay, got it. Will remove the clock entry as it will be set by the bootloaders
Quoted 11 lines
Quoted 11 lines
drivers/clk/qcom/gcc-ipq9574.c new file +9
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_anoc_pcnoc_ahb_clk = { + .halt_reg =0x2E094 , + .clkr = { + .enable_reg =0x2E094 ,
Quoted 9 lines
drivers/clk/qcom/gcc-ipq9574.c line 2206
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_anoc_pcnoc_ahb_clk" , + .parent_hws = (const struct clk_hw *[]) { + &pcnoc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED ,Same thing
Okay
Quoted 6 lines
Quoted 5 lines
drivers/clk/qcom/gcc-ipq9574.c new file +5
-0+ .ops = &clk_branch2_ops, + }, + }, +}; +
Quoted 13 lines
drivers/clk/qcom/gcc-ipq9574.c line 2488
Quoted 12 lines
drivers/clk/qcom/gcc-ipq9574.c new file +12
-0+ +static struct clk_rcg2 system_noc_bfdcd_clk_src = { + .cmd_rcgr =0x2e004 , + .freq_tbl = ftbl_system_noc_bfdcd_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_gpll4_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="system_noc_bfdcd_clk_src" , + .parent_data = gcc_xo_gpll0_gpll4, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0_gpll4), + .ops = &clk_rcg2_ops, + .flags =CLK_IS_CRITICAL ,.flags goes before .ops in all other nodes, please be consistent.
okay
Quoted 25 lines
Quoted 25 lines
drivers/clk/qcom/gcc-ipq9574.c new file +24
-0+ }, +}; + +static struct clk_branch gcc_q6ss_boot_clk = { + .halt_reg =0x25080 , + .halt_check =BRANCH_HALT_SKIP , + .clkr = { + .enable_reg =0x25080 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_q6ss_boot_clk" , + .parent_hws = (const struct clk_hw *[]) { + &system_noc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_nssnoc_snoc_clk = { + .halt_reg =0x17028 , + .clkr = { + .enable_reg =0x17028 ,
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 2519
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_nssnoc_snoc_clk" , + .parent_hws = (const struct clk_hw *[]) { + &system_noc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED ,Same story as with PCNoC
okay
Quoted 9 lines
Quoted 9 lines
drivers/clk/qcom/gcc-ipq9574.c new file +9
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_nssnoc_snoc_1_clk = { + .halt_reg =0x1707c , + .clkr = { + .enable_reg =0x1707c ,
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 2535
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_nssnoc_snoc_1_clk" , + .parent_hws = (const struct clk_hw *[]) { + &system_noc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED ,And here
sure
Quoted 45 lines
Quoted 45 lines
drivers/clk/qcom/gcc-ipq9574.c new file +44
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qdss_etr_usb_clk = { + .halt_reg =0x2D060 , + .clkr = { + .enable_reg =0x2D060 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qdss_etr_usb_clk" , + .parent_hws = (const struct clk_hw *[]) { + &system_noc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_wcss_ahb_clk_src[] = { +F (24000000 ,P_XO ,1 ,0 ,0 ), +F (133333333 ,P_GPLL0 ,6 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 wcss_ahb_clk_src = { + .cmd_rcgr =0x25030 , + .freq_tbl = ftbl_wcss_ahb_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="wcss_ahb_clk_src" , + .parent_data = gcc_xo_gpll0, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_q6_ahb_clk = { + .halt_reg =0x25014 , + .clkr = { + .enable_reg =0x25014 ,
Quoted 9 lines
drivers/clk/qcom/gcc-ipq9574.c line 2586
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_q6_ahb_clk" , + .parent_hws = (const struct clk_hw *[]) { + &wcss_ahb_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED ,This sounds like a hack, perhaps it should be fed to a remoteproc node?
Sure, will remove the ignore_unused flag and handle it in the corresponding driver
Quoted 10 lines
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +9
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_q6_ahb_s_clk = { + .halt_reg =0x25018 , + .clkr = { + .enable_reg =0x25018 ,
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 2602
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_q6_ahb_s_clk" , + .parent_hws = (const struct clk_hw *[]) { + &wcss_ahb_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED ,And this one too
okay
Quoted 11 lines
Quoted 11 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_ecahb_clk = { + .halt_reg =0x25058 , + .clkr = { + .enable_reg =0x25058 , + .enable_mask =BIT (0 ),
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 2618
Quoted 6 lines
drivers/clk/qcom/gcc-ipq9574.c new file +6
-0+ .hw.init = &(struct clk_init_data) { + .name ="gcc_wcss_ecahb_clk" , + .parent_hws = (const struct clk_hw *[]) { + &wcss_ahb_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED ,Similarly, this one should probably be fed to the wcss node and properly managed with a driver, not left dangling
Got it
Quoted 10 lines
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +9
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_acmt_clk = { + .halt_reg =0x2505c , + .clkr = { + .enable_reg =0x2505c ,
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 2634
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_wcss_acmt_clk" , + .parent_hws = (const struct clk_hw *[]) { + &wcss_ahb_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED ,Ditto
okay
Quoted 10 lines
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +9
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sys_noc_axi_clk = { + .halt_reg =0x2e01c , + .clkr = { + .enable_reg =0x2e01c ,
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 2650
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_sys_noc_axi_clk" , + .parent_hws = (const struct clk_hw *[]) { + &system_noc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED ,
CLK_IS_CRITICAL?
Okay
Quoted 12 lines
Quoted 12 lines
drivers/clk/qcom/gcc-ipq9574.c new file +11
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_anoc0_axi_clk = { + .halt_reg =0x2e078 , + .clkr = { + .enable_reg =0x2e078 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) {
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 2666
Quoted 5 lines
drivers/clk/qcom/gcc-ipq9574.c new file +5
-0+ .name = "gcc_anoc0_axi_clk", + .parent_hws = (const struct clk_hw *[]) { + &system_noc_bfdcd_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,If this it the same kind of ANoC(n) as on 8996/8998, this should definitely be either
CLK_IS_CRITICALor managed through a driver.. Probably the second one..
Sure, will do
Quoted 11 lines
Quoted 11 lines
drivers/clk/qcom/gcc-ipq9574.c new file +9
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_anoc1_axi_clk = { + .halt_reg =0x2e088 , + .clkr = { + .enable_reg =0x2e088 ,
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 2682
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_anoc1_axi_clk" , + .parent_hws = (const struct clk_hw *[]) { + &system_noc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED ,Ditto
Okay
Quoted 10 lines
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +9
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_anoc0_tbu_clk = { + .halt_reg =0x12038 , + .clkr = { + .enable_reg =0xb00c ,
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 2698
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ .enable_mask = BIT(3), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_anoc0_tbu_clk" , + .parent_hws = (const struct clk_hw *[]) { + &system_noc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED ,Ditto
Okay
Quoted 10 lines
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +9
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_anoc1_tbu_clk = { + .halt_reg =0x12048 , + .clkr = { + .enable_reg =0xb00c ,
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 2714
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ .enable_mask = BIT(5), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_anoc1_tbu_clk" , + .parent_hws = (const struct clk_hw *[]) { + &system_noc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED ,Ditto
okay
Quoted 10 lines
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +9
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_mem_noc_snoc_axi_clk = { + .halt_reg =0x19018 , + .clkr = { + .enable_reg =0x19018 ,
Quoted 9 lines
drivers/clk/qcom/gcc-ipq9574.c line 2730
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_mem_noc_snoc_axi_clk" , + .parent_hws = (const struct clk_hw *[]) { + &system_noc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED ,This one also smells of an interconnect clock more than anything else..
Okay
Quoted 10 lines
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +9
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_imem_axi_clk = { + .halt_reg =0xe004 , + .clkr = { + .enable_reg =0xb004 ,
Quoted 9 lines
drivers/clk/qcom/gcc-ipq9574.c line 2746
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ .enable_mask = BIT(12), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_imem_axi_clk" , + .parent_hws = (const struct clk_hw *[]) { + &system_noc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED ,You could pass this one to the imem node
Sure okay
Quoted 9 lines
Quoted 9 lines
drivers/clk/qcom/gcc-ipq9574.c new file +9
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sys_noc_wcss_ahb_clk = { + .halt_reg =0x2e030 , + .clkr = { + .enable_reg =0x2e030 ,
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 2762
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_sys_noc_wcss_ahb_clk" , + .parent_hws = (const struct clk_hw *[]) { + &wcss_ahb_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED ,Definitely handled through a driver..
Yes, okay
Quoted 30 lines
Quoted 30 lines
drivers/clk/qcom/gcc-ipq9574.c new file +29
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_wcss_axi_m_clk_src[] = { +F (24000000 ,P_XO ,1 ,0 ,0 ), +F (133333333 ,P_GPLL0 ,6 ,0 ,0 ), +F (266666667 ,P_GPLL0 ,3 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 wcss_axi_m_clk_src = { + .cmd_rcgr =0x25078 , + .freq_tbl = ftbl_wcss_axi_m_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="wcss_axi_m_clk_src" , + .parent_data = gcc_xo_gpll0, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_anoc_wcss_axi_m_clk = { + .halt_reg =0x2e0a8 , + .clkr = { + .enable_reg =0x2e0a8 ,
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 2798
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_anoc_wcss_axi_m_clk" , + .parent_hws = (const struct clk_hw *[]) { + &wcss_axi_m_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED ,Ditto
okay
Quoted 28 lines
Quoted 28 lines
drivers/clk/qcom/gcc-ipq9574.c new file +27
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_qdss_at_clk_src[] = { +F (240000000 ,P_GPLL4 ,5 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 qdss_at_clk_src = { + .cmd_rcgr =0x2d004 , + .freq_tbl = ftbl_qdss_at_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll4_gpll0_gpll0_div2_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="qdss_at_clk_src" , + .parent_data = gcc_xo_gpll4_gpll0_gpll0_div2, + .num_parents =ARRAY_SIZE (gcc_xo_gpll4_gpll0_gpll0_div2), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_q6ss_atbm_clk = { + .halt_reg =0x2501c , + .clkr = { + .enable_reg =0x2501c ,
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 2832
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_q6ss_atbm_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_at_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED ,Ditto
okay
Quoted 10 lines
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +9
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_dbg_ifc_atb_clk = { + .halt_reg =0x2503c , + .clkr = { + .enable_reg =0x2503c ,
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 2848
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_wcss_dbg_ifc_atb_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_at_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED ,Not gonna point out every similar occurence, you probably get me now
Sure, understood. Will update them all
Quoted 26 lines
Quoted 26 lines
drivers/clk/qcom/gcc-ipq9574.c new file +25
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_nssnoc_atb_clk = { + .halt_reg =0x17014 , + .clkr = { + .enable_reg =0x17014 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_nssnoc_atb_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_at_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qdss_at_clk = { + .halt_reg =0x2D038 , + .clkr = { + .enable_reg =0x2D038 ,
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 2880
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qdss_at_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_at_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IS_CRITICAL ,Probably not critical, you don't need debug 24/7.
okay
Quoted 56 lines
Quoted 56 lines
drivers/clk/qcom/gcc-ipq9574.c new file +54
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sys_noc_at_clk = { + .halt_reg =0x2e038 , + .clkr = { + .enable_reg =0x2e038 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_sys_noc_at_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_at_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IS_CRITICAL , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcnoc_at_clk = { + .halt_reg =0x31024 , + .clkr = { + .enable_reg =0x31024 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_pcnoc_at_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_at_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IS_CRITICAL , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_fixed_factor gcc_eud_at_div_clk_src = { + .mult =1 , + .div =6 , + .hw.init = &(struct clk_init_data ) { + .name ="gcc_eud_at_div_clk_src" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_at_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_fixed_factor_ops, + }, +}; + +static struct clk_branch gcc_usb0_eud_at_clk = { + .halt_reg =0x30004 , + .clkr = { + .enable_reg =0x30004 ,
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 2941
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_usb0_eud_at_clk" , + .parent_hws = (const struct clk_hw *[]) { + &gcc_eud_at_div_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IS_CRITICAL ,Definitely not critical.
Okay
Quoted 10 lines
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +9
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qdss_eud_at_clk = { + .halt_reg =0x2D06C , + .clkr = { + .enable_reg =0x2D06C ,
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 2957
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qdss_eud_at_clk" , + .parent_hws = (const struct clk_hw *[]) { + &gcc_eud_at_div_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IS_CRITICAL ,Ditto.
Okay
Quoted 435 lines
Quoted 435 lines
drivers/clk/qcom/gcc-ipq9574.c new file +434
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_qdss_stm_clk_src[] = { +F (24000000 ,P_XO ,1 ,0 ,0 ), +F (200000000 ,P_GPLL0 ,4 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 qdss_stm_clk_src = { + .cmd_rcgr =0x2D00C , + .freq_tbl = ftbl_qdss_stm_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="qdss_stm_clk_src" , + .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_qdss_stm_clk = { + .halt_reg =0x2D03C , + .clkr = { + .enable_reg =0x2D03C , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qdss_stm_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_stm_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sys_noc_qdss_stm_axi_clk = { + .halt_reg =0x2E034 , + .clkr = { + .enable_reg =0x2E034 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_sys_noc_qdss_stm_axi_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_stm_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_qdss_traceclkin_clk_src[] = { +F (300000000 ,P_GPLL4 ,4 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 qdss_traceclkin_clk_src = { + .cmd_rcgr =0x2d014 , + .freq_tbl = ftbl_qdss_traceclkin_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll4_gpll0_gpll0_div2_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="qdss_traceclkin_clk_src" , + .parent_data = gcc_xo_gpll4_gpll0_gpll0_div2, + .num_parents =ARRAY_SIZE (gcc_xo_gpll4_gpll0_gpll0_div2), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_qdss_traceclkin_clk = { + .halt_reg =0x2D040 , + .clkr = { + .enable_reg =0x2D040 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qdss_traceclkin_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_traceclkin_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_qdss_tsctr_clk_src[] = { +F (600000000 ,P_GPLL4 ,2 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 qdss_tsctr_clk_src = { + .cmd_rcgr =0x2d01c , + .freq_tbl = ftbl_qdss_tsctr_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll4_gpll0_gpll0_div2_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="qdss_tsctr_clk_src" , + .parent_data = gcc_xo_gpll4_gpll0_gpll0_div2, + .num_parents =ARRAY_SIZE (gcc_xo_gpll4_gpll0_gpll0_div2), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_fixed_factor qdss_tsctr_div2_clk_src = { + .mult =1 , + .div =2 , + .hw.init = &(struct clk_init_data ) { + .name ="qdss_tsctr_div2_clk_src" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_fixed_factor_ops, + }, +}; + +static struct clk_branch gcc_q6_tsctr_1to2_clk = { + .halt_reg =0x25020 , + .clkr = { + .enable_reg =0x25020 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_q6_tsctr_1to2_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_div2_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_dbg_ifc_nts_clk = { + .halt_reg =0x25040 , + .clkr = { + .enable_reg =0x25040 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_wcss_dbg_ifc_nts_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_div2_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qdss_tsctr_div2_clk = { + .halt_reg =0x2d044 , + .clkr = { + .enable_reg =0x2d044 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qdss_tsctr_div2_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_div2_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_uniphy_sys_clk_src[] = { +F (24000000 ,P_XO ,1 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 uniphy_sys_clk_src = { + .cmd_rcgr =0x17090 , + .freq_tbl = ftbl_uniphy_sys_clk_src, + .mnd_width =8 , + .hid_width =5 , + .parent_map = gcc_xo_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="uniphy_sys_clk_src" , + .parent_data = gcc_xo_data, + .num_parents =ARRAY_SIZE (gcc_xo_data), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 nss_ts_clk_src = { + .cmd_rcgr =0x17088 , + .freq_tbl = ftbl_uniphy_sys_clk_src, + .mnd_width =8 , + .hid_width =5 , + .parent_map = gcc_xo_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="nss_ts_clk_src" , + .parent_data = gcc_xo_data, + .num_parents =ARRAY_SIZE (gcc_xo_data), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_qdss_ts_clk = { + .halt_reg =0x2D078 , + .clkr = { + .enable_reg =0x2D078 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qdss_ts_clk" , + .parent_hws = (const struct clk_hw *[]) { + &nss_ts_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_snoc_ts_clk = { + .halt_reg =0x2e068 , + .clkr = { + .enable_reg =0x2e068 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_snoc_ts_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_div2_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_mem_noc_ts_clk = { + .halt_reg =0x19028 , + .clkr = { + .enable_reg =0x19028 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_mem_noc_ts_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_div2_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_fixed_factor qdss_dap_sync_clk_src = { + .mult =1 , + .div =4 , + .hw.init = &(struct clk_init_data ) { + .name ="qdss_dap_sync_clk_src" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_clk_src.clkr.hw }, + .num_parents =1 , + .ops = &clk_fixed_factor_ops, + }, +}; + +static struct clk_branch gcc_qdss_tsctr_div4_clk = { + .halt_reg =0x2d04c , + .clkr = { + .enable_reg =0x2d04c , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qdss_tsctr_div4_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_dap_sync_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_fixed_factor qdss_tsctr_div8_clk_src = { + .mult =1 , + .div =8 , + .hw.init = &(struct clk_init_data ) { + .name ="qdss_tsctr_div8_clk_src" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_clk_src.clkr.hw }, + .num_parents =1 , + .ops = &clk_fixed_factor_ops, + }, +}; + +static struct clk_branch gcc_nss_ts_clk = { + .halt_reg =0x17018 , + .clkr = { + .enable_reg =0x17018 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_nss_ts_clk" , + .parent_hws = (const struct clk_hw *[]) { + &nss_ts_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qdss_tsctr_div8_clk = { + .halt_reg =0x2d050 , + .clkr = { + .enable_reg =0x2d050 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qdss_tsctr_div8_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_div8_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcnoc_ts_clk = { + .halt_reg =0x3102c , + .clkr = { + .enable_reg =0x3102c , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_pcnoc_ts_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_div8_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_fixed_factor qdss_tsctr_div16_clk_src = { + .mult =1 , + .div =16 , + .hw.init = &(struct clk_init_data ) { + .name ="qdss_tsctr_div16_clk_src" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_clk_src.clkr.hw }, + .num_parents =1 , + .ops = &clk_fixed_factor_ops, + }, +}; + +static struct clk_branch gcc_qdss_tsctr_div16_clk = { + .halt_reg =0x2d054 , + .clkr = { + .enable_reg =0x2d054 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qdss_tsctr_div16_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_div16_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_q6ss_pclkdbg_clk = { + .halt_reg =0x25024 , + .clkr = { + .enable_reg =0x25024 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_q6ss_pclkdbg_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_dap_sync_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_q6ss_trig_clk = { + .halt_reg =0x25068 , + .clkr = { + .enable_reg =0x25068 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_q6ss_trig_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_dap_sync_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_dbg_ifc_apb_clk = { + .halt_reg =0x25038 , + .clkr = { + .enable_reg =0x25038 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_wcss_dbg_ifc_apb_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_dap_sync_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_dbg_ifc_dapbus_clk = { + .halt_reg =0x25044 , + .clkr = { + .enable_reg =0x25044 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_wcss_dbg_ifc_dapbus_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_dap_sync_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qdss_dap_clk = { + .halt_reg =0x2d058 , + .clkr = { + .enable_reg =0x2d058 ,
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 3398
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qdss_dap_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_dap_sync_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IS_CRITICAL ,Probably not critical.
Okay
Quoted 630 lines
Quoted 630 lines
drivers/clk/qcom/gcc-ipq9574.c new file +628
-0+ .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_qdss_apb2jtag_clk = { + .halt_reg =0x2d05c , + .clkr = { + .enable_reg =0x2d05c , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qdss_apb2jtag_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_dap_sync_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcnoc_dcc_clk = { + .halt_reg =0x31080 , + .clkr = { + .enable_reg =0x31080 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_pcnoc_dcc_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_dap_sync_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_fixed_factor qdss_tsctr_div3_clk_src = { + .mult =1 , + .div =3 , + .hw.init = &(struct clk_init_data ) { + .name ="qdss_tsctr_div3_clk_src" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_clk_src.clkr.hw }, + .num_parents =1 , + .ops = &clk_fixed_factor_ops, + }, +}; + +static struct clk_branch gcc_qdss_tsctr_div3_clk = { + .halt_reg =0x2d048 , + .clkr = { + .enable_reg =0x2d048 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qdss_tsctr_div3_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qdss_tsctr_div3_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_qpic_io_macro_clk_src[] = { +F (24000000 ,P_XO ,1 ,0 ,0 ), +F (100000000 ,P_GPLL0 ,8 ,0 ,0 ), +F (200000000 ,P_GPLL0 ,4 ,0 ,0 ), +F (320000000 ,P_GPLL0 ,2.5 ,0 ,0 ), +F (400000000 ,P_GPLL0 ,2 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 qpic_io_macro_clk_src = { + .cmd_rcgr =0x32004 , + .freq_tbl = ftbl_qpic_io_macro_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_gpll2_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="qpic_io_macro_clk_src" , + .parent_data = gcc_xo_gpll0_gpll2, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0_gpll2), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_qpic_io_macro_clk = { + .halt_reg =0x3200c , + .clkr = { + .enable_reg =0x3200c , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_qpic_io_macro_clk" , + .parent_hws = (const struct clk_hw *[]) { + &qpic_io_macro_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_q6_axi_clk_src[] = { +F (533333333 ,P_GPLL0 ,1.5 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 q6_axi_clk_src = { + .cmd_rcgr =0x25004 , + .freq_tbl = ftbl_q6_axi_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_gpll2_gpll4_pi_sleep_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="q6_axi_clk_src" , + .parent_data = gcc_xo_gpll0_gpll2_gpll4_pi_sleep, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0_gpll2_gpll4_pi_sleep), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_q6_axim_clk = { + .halt_reg =0x2500c , + .clkr = { + .enable_reg =0x2500c , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_q6_axim_clk" , + .parent_hws = (const struct clk_hw *[]) { + &q6_axi_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_wcss_q6_tbu_clk = { + .halt_reg =0x12050 , + .halt_check =BRANCH_HALT_DELAY , + .clkr = { + .enable_reg =0xb00c , + .enable_mask =BIT (6 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_wcss_q6_tbu_clk" , + .parent_hws = (const struct clk_hw *[]) { + &q6_axi_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_mem_noc_q6_axi_clk = { + .halt_reg =0x19010 , + .clkr = { + .enable_reg =0x19010 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_mem_noc_q6_axi_clk" , + .parent_hws = (const struct clk_hw *[]) { + &q6_axi_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_q6_axim2_clk_src[] = { +F (342857143 ,P_GPLL4 ,3.5 ,0 ,0 ), + { } +}; + +static const struct parent_map gcc_xo_gpll0_gpll4_bias_pll_ubinc_clk_map[] = { + {P_XO ,0 }, + {P_GPLL0 ,1 }, + {P_GPLL4 ,2 }, + {P_BIAS_PLL_UBI_NC_CLK ,4 }, +}; + +static struct clk_rcg2 q6_axim2_clk_src = { + .cmd_rcgr =0x25028 , + .freq_tbl = ftbl_q6_axim2_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_gpll4_bias_pll_ubinc_clk_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="q6_axim2_clk_src" , + .parent_data = gcc_xo_gpll0_gpll4_bias_pll_ubi_nc_clk, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0_gpll4_bias_pll_ubi_nc_clk), + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_nssnoc_memnoc_bfdcd_clk_src[] = { +F (533333333 ,P_GPLL0 ,1.5 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 nssnoc_memnoc_bfdcd_clk_src = { + .cmd_rcgr =0x17004 , + .freq_tbl = ftbl_nssnoc_memnoc_bfdcd_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_gpll0_aux_gpll2_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="nssnoc_memnoc_bfdcd_clk_src" , + .parent_data = gcc_xo_gpll0_gpll0_aux_gpll2, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0_gpll0_aux_gpll2), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_nssnoc_memnoc_clk = { + .halt_reg =0x17024 , + .clkr = { + .enable_reg =0x17024 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_nssnoc_memnoc_clk" , + .parent_hws = (const struct clk_hw *[]) { + &nssnoc_memnoc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_nssnoc_mem_noc_1_clk = { + .halt_reg =0x17084 , + .clkr = { + .enable_reg =0x17084 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_nssnoc_mem_noc_1_clk" , + .parent_hws = (const struct clk_hw *[]) { + &nssnoc_memnoc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_nss_tbu_clk = { + .halt_reg =0x12040 , + .clkr = { + .enable_reg =0xb00c , + .enable_mask =BIT (4 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_nss_tbu_clk" , + .parent_hws = (const struct clk_hw *[]) { + &nssnoc_memnoc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_mem_noc_nssnoc_clk = { + .halt_reg =0x19014 , + .clkr = { + .enable_reg =0x19014 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_mem_noc_nssnoc_clk" , + .parent_hws = (const struct clk_hw *[]) { + &nssnoc_memnoc_bfdcd_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IGNORE_UNUSED , + .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_lpass_axim_clk_src[] = { +F (133333333 ,P_GPLL0 ,6 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 lpass_axim_clk_src = { + .cmd_rcgr =0x2700c , + .freq_tbl = ftbl_lpass_axim_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="lpass_axim_clk_src" , + .parent_data = gcc_xo_gpll0, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 lpass_sway_clk_src = { + .cmd_rcgr =0x27004 , + .freq_tbl = ftbl_lpass_axim_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="lpass_sway_clk_src" , + .parent_data = gcc_xo_gpll0, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0), + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_adss_pwm_clk_src[] = { +F (24000000 ,P_XO ,1 ,0 ,0 ), +F (100000000 ,P_GPLL0 ,8 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 adss_pwm_clk_src = { + .cmd_rcgr =0x1c004 , + .freq_tbl = ftbl_adss_pwm_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="adss_pwm_clk_src" , + .parent_data = gcc_xo_gpll0, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_adss_pwm_clk = { + .halt_reg =0x1c00c , + .clkr = { + .enable_reg =0x1c00c , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_adss_pwm_clk" , + .parent_hws = (const struct clk_hw *[]) { + &adss_pwm_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct freq_tbl ftbl_gp1_clk_src[] = { +F (24000000 ,P_XO ,1 ,0 ,0 ), +F (200000000 ,P_GPLL0 ,4 ,0 ,0 ), + { } +}; + +static struct clk_rcg2 gp1_clk_src = { + .cmd_rcgr =0x8004 , + .freq_tbl = ftbl_gp1_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_gpll0_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="gp1_clk_src" , + .parent_data = gcc_xo_gpll0_gpll0_sleep_clk, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0_gpll0_sleep_clk), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gp2_clk_src = { + .cmd_rcgr =0x9004 , + .freq_tbl = ftbl_gp1_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_gpll0_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="gp2_clk_src" , + .parent_data = gcc_xo_gpll0_gpll0_sleep_clk, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0_gpll0_sleep_clk), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gp3_clk_src = { + .cmd_rcgr =0xa004 , + .freq_tbl = ftbl_gp1_clk_src, + .hid_width =5 , + .parent_map = gcc_xo_gpll0_gpll0_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data ) { + .name ="gp3_clk_src" , + .parent_data = gcc_xo_gpll0_gpll0_sleep_clk, + .num_parents =ARRAY_SIZE (gcc_xo_gpll0_gpll0_sleep_clk), + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_xo_clk_src = { + .halt_reg =0x34004 , + .clkr = { + .enable_reg =0x34004 , + .enable_mask =BIT (1 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_xo_clk_src" , + .parent_data = gcc_xo_data, + .num_parents =ARRAY_SIZE (gcc_xo_data), + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_nssnoc_xo_dcd_clk = { + .halt_reg =0x17074 , + .clkr = { + .enable_reg =0x17074 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_nssnoc_xo_dcd_clk" , + .parent_hws = (const struct clk_hw *[]) { + &gcc_xo_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_xo_clk = { + .halt_reg =0x34018 , + .clkr = { + .enable_reg =0x34018 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_xo_clk" , + .parent_hws = (const struct clk_hw *[]) { + &gcc_xo_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IS_CRITICAL , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_uniphy0_sys_clk = { + .halt_reg =0x17048 , + .clkr = { + .enable_reg =0x17048 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_uniphy0_sys_clk" , + .parent_hws = (const struct clk_hw *[]) { + &uniphy_sys_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_uniphy1_sys_clk = { + .halt_reg =0x17058 , + .clkr = { + .enable_reg =0x17058 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_uniphy1_sys_clk" , + .parent_hws = (const struct clk_hw *[]) { + &uniphy_sys_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_uniphy2_sys_clk = { + .halt_reg =0x17068 , + .clkr = { + .enable_reg =0x17068 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_uniphy2_sys_clk" , + .parent_hws = (const struct clk_hw *[]) { + &uniphy_sys_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_cmn_12gpll_sys_clk = { + .halt_reg =0x3a008 , + .clkr = { + .enable_reg =0x3a008 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_cmn_12gpll_sys_clk" , + .parent_hws = (const struct clk_hw *[]) { + &uniphy_sys_clk_src.clkr.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_fixed_factor gcc_xo_div4_clk_src = { + .mult =1 , + .div =4 , + .hw.init = &(struct clk_init_data ) { + .name ="gcc_xo_div4_clk_src" , + .parent_hws = (const struct clk_hw *[]) { + &gcc_xo_clk_src.clkr.hw }, + .num_parents =1 , + .ops = &clk_fixed_factor_ops, + .flags =CLK_SET_RATE_PARENT , + }, +}; + +static struct clk_branch gcc_nssnoc_qosgen_ref_clk = { + .halt_reg =0x1701c , + .clkr = { + .enable_reg =0x1701c , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_nssnoc_qosgen_ref_clk" , + .parent_hws = (const struct clk_hw *[]) { + &gcc_xo_div4_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_nssnoc_timeout_ref_clk = { + .halt_reg =0x17020 , + .clkr = { + .enable_reg =0x17020 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_nssnoc_timeout_ref_clk" , + .parent_hws = (const struct clk_hw *[]) { + &gcc_xo_div4_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_xo_div4_clk = { + .halt_reg =0x3401c , + .clkr = { + .enable_reg =0x3401c , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ) { + .name ="gcc_xo_div4_clk" , + .parent_hws = (const struct clk_hw *[]) { + &gcc_xo_div4_clk_src.hw }, + .num_parents =1 , + .flags =CLK_SET_RATE_PARENT |CLK_IS_CRITICAL , + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_hw *gcc_ipq9574_hws[] = { + &gpll0_out_main_div2.hw, + &gcc_xo_div4_clk_src.hw, + &qdss_dap_sync_clk_src.hw, + &qdss_tsctr_div2_clk_src.hw, + &qdss_tsctr_div8_clk_src.hw, + &qdss_tsctr_div16_clk_src.hw, + &qdss_tsctr_div3_clk_src.hw, + &gcc_eud_at_div_clk_src.hw, + &pcnoc_clk_src.hw, +}; + +static int clk_dummy_is_enabled (struct clk_hw *hw) +{ +return 1 ; +}; + +static int clk_dummy_enable (struct clk_hw *hw) +{ +return 0 ; +}; + +static void clk_dummy_disable (struct clk_hw *hw) +{ +return ; +}; + +static u8 clk_dummy_get_parent (struct clk_hw *hw) +{ +return 0 ; +}; + +static int clk_dummy_set_parent (struct clk_hw *hw,u8 index) +{ +return 0 ; +}; + +static int clk_dummy_set_rate (struct clk_hw *hw,unsigned long rate, +unsigned long parent_rate) +{ +return 0 ; +}; + +static int clk_dummy_determine_rate (struct clk_hw *hw, +struct clk_rate_request *req) +{ +return 0 ; +}; + +static unsigned long clk_dummy_recalc_rate (struct clk_hw *hw, +unsigned long parent_rate) +{ +return parent_rate; +}; + +static const struct clk_ops clk_dummy_ops = { + .is_enabled = clk_dummy_is_enabled, + .enable = clk_dummy_enable, + .disable = clk_dummy_disable, + .get_parent = clk_dummy_get_parent, + .set_parent = clk_dummy_set_parent, + .set_rate = clk_dummy_set_rate, + .recalc_rate = clk_dummy_recalc_rate, + .determine_rate = clk_dummy_determine_rate, +}; + +#define DEFINE_DUMMY_CLK (clk_name) \ +(&(struct clk_regmap) { \
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 4033
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ .hw.init = &(struct clk_init_data) { \ + .name = #clk_name, \ + .parent_names = (const char *[]) { "xo"}, \ + .num_parents = 1, \ + .ops = &clk_dummy_ops, \ + }, \ +})Definitely a big no.
Sure, will drop
Quoted 433 lines
Quoted 433 lines
drivers/clk/qcom/gcc-ipq9574.c new file +432
-0+ +static struct clk_regmap *gcc_ipq9574_clks[] = { + [GPLL0_MAIN ] = &gpll0_main.clkr, + [GPLL0 ] = &gpll0.clkr, + [GPLL4_MAIN ] = &gpll4_main.clkr, + [GPLL4 ] = &gpll4.clkr, + [GPLL2_MAIN ] = &gpll2_main.clkr, + [GPLL2 ] = &gpll2.clkr, + [GCC_SLEEP_CLK_SRC ] = &gcc_sleep_clk_src.clkr, + [APSS_AHB_CLK_SRC ] = &apss_ahb_clk_src.clkr, + [APSS_AXI_CLK_SRC ] = &apss_axi_clk_src.clkr, + [BLSP1_QUP1_I2C_APPS_CLK_SRC ] = &blsp1_qup1_i2c_apps_clk_src.clkr, + [BLSP1_QUP1_SPI_APPS_CLK_SRC ] = &blsp1_qup1_spi_apps_clk_src.clkr, + [BLSP1_QUP2_I2C_APPS_CLK_SRC ] = &blsp1_qup2_i2c_apps_clk_src.clkr, + [BLSP1_QUP2_SPI_APPS_CLK_SRC ] = &blsp1_qup2_spi_apps_clk_src.clkr, + [BLSP1_QUP3_I2C_APPS_CLK_SRC ] = &blsp1_qup3_i2c_apps_clk_src.clkr, + [BLSP1_QUP3_SPI_APPS_CLK_SRC ] = &blsp1_qup3_spi_apps_clk_src.clkr, + [BLSP1_QUP4_I2C_APPS_CLK_SRC ] = &blsp1_qup4_i2c_apps_clk_src.clkr, + [BLSP1_QUP4_SPI_APPS_CLK_SRC ] = &blsp1_qup4_spi_apps_clk_src.clkr, + [BLSP1_QUP5_I2C_APPS_CLK_SRC ] = &blsp1_qup5_i2c_apps_clk_src.clkr, + [BLSP1_QUP5_SPI_APPS_CLK_SRC ] = &blsp1_qup5_spi_apps_clk_src.clkr, + [BLSP1_QUP6_I2C_APPS_CLK_SRC ] = &blsp1_qup6_i2c_apps_clk_src.clkr, + [BLSP1_QUP6_SPI_APPS_CLK_SRC ] = &blsp1_qup6_spi_apps_clk_src.clkr, + [BLSP1_UART1_APPS_CLK_SRC ] = &blsp1_uart1_apps_clk_src.clkr, + [BLSP1_UART2_APPS_CLK_SRC ] = &blsp1_uart2_apps_clk_src.clkr, + [BLSP1_UART3_APPS_CLK_SRC ] = &blsp1_uart3_apps_clk_src.clkr, + [BLSP1_UART4_APPS_CLK_SRC ] = &blsp1_uart4_apps_clk_src.clkr, + [BLSP1_UART5_APPS_CLK_SRC ] = &blsp1_uart5_apps_clk_src.clkr, + [BLSP1_UART6_APPS_CLK_SRC ] = &blsp1_uart6_apps_clk_src.clkr, + [GCC_APSS_AHB_CLK ] = &gcc_apss_ahb_clk.clkr, + [GCC_APSS_AXI_CLK ] = &gcc_apss_axi_clk.clkr, + [GCC_BLSP1_QUP1_I2C_APPS_CLK ] = &gcc_blsp1_qup1_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP1_SPI_APPS_CLK ] = &gcc_blsp1_qup1_spi_apps_clk.clkr, + [GCC_BLSP1_QUP2_I2C_APPS_CLK ] = &gcc_blsp1_qup2_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP2_SPI_APPS_CLK ] = &gcc_blsp1_qup2_spi_apps_clk.clkr, + [GCC_BLSP1_QUP3_I2C_APPS_CLK ] = &gcc_blsp1_qup3_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP3_SPI_APPS_CLK ] = &gcc_blsp1_qup3_spi_apps_clk.clkr, + [GCC_BLSP1_QUP4_I2C_APPS_CLK ] = &gcc_blsp1_qup4_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP4_SPI_APPS_CLK ] = &gcc_blsp1_qup4_spi_apps_clk.clkr, + [GCC_BLSP1_QUP5_I2C_APPS_CLK ] = &gcc_blsp1_qup5_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP5_SPI_APPS_CLK ] = &gcc_blsp1_qup5_spi_apps_clk.clkr, + [GCC_BLSP1_QUP6_I2C_APPS_CLK ] = &gcc_blsp1_qup6_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP6_SPI_APPS_CLK ] = &gcc_blsp1_qup6_spi_apps_clk.clkr, + [GCC_BLSP1_UART1_APPS_CLK ] = &gcc_blsp1_uart1_apps_clk.clkr, + [GCC_BLSP1_UART2_APPS_CLK ] = &gcc_blsp1_uart2_apps_clk.clkr, + [GCC_BLSP1_UART3_APPS_CLK ] = &gcc_blsp1_uart3_apps_clk.clkr, + [GCC_BLSP1_UART4_APPS_CLK ] = &gcc_blsp1_uart4_apps_clk.clkr, + [GCC_BLSP1_UART5_APPS_CLK ] = &gcc_blsp1_uart5_apps_clk.clkr, + [GCC_BLSP1_UART6_APPS_CLK ] = &gcc_blsp1_uart6_apps_clk.clkr, + [PCIE0_AXI_M_CLK_SRC ] = &pcie0_axi_m_clk_src.clkr, + [GCC_PCIE0_AXI_M_CLK ] = &gcc_pcie0_axi_m_clk.clkr, + [PCIE1_AXI_M_CLK_SRC ] = &pcie1_axi_m_clk_src.clkr, + [GCC_PCIE1_AXI_M_CLK ] = &gcc_pcie1_axi_m_clk.clkr, + [PCIE2_AXI_M_CLK_SRC ] = &pcie2_axi_m_clk_src.clkr, + [GCC_PCIE2_AXI_M_CLK ] = &gcc_pcie2_axi_m_clk.clkr, + [PCIE3_AXI_M_CLK_SRC ] = &pcie3_axi_m_clk_src.clkr, + [GCC_PCIE3_AXI_M_CLK ] = &gcc_pcie3_axi_m_clk.clkr, + [PCIE0_AXI_S_CLK_SRC ] = &pcie0_axi_s_clk_src.clkr, + [GCC_PCIE0_AXI_S_BRIDGE_CLK ] = &gcc_pcie0_axi_s_bridge_clk.clkr, + [GCC_PCIE0_AXI_S_CLK ] = &gcc_pcie0_axi_s_clk.clkr, + [PCIE1_AXI_S_CLK_SRC ] = &pcie1_axi_s_clk_src.clkr, + [GCC_PCIE1_AXI_S_BRIDGE_CLK ] = &gcc_pcie1_axi_s_bridge_clk.clkr, + [GCC_PCIE1_AXI_S_CLK ] = &gcc_pcie1_axi_s_clk.clkr, + [PCIE2_AXI_S_CLK_SRC ] = &pcie2_axi_s_clk_src.clkr, + [GCC_PCIE2_AXI_S_BRIDGE_CLK ] = &gcc_pcie2_axi_s_bridge_clk.clkr, + [GCC_PCIE2_AXI_S_CLK ] = &gcc_pcie2_axi_s_clk.clkr, + [PCIE3_AXI_S_CLK_SRC ] = &pcie3_axi_s_clk_src.clkr, + [GCC_PCIE3_AXI_S_BRIDGE_CLK ] = &gcc_pcie3_axi_s_bridge_clk.clkr, + [GCC_PCIE3_AXI_S_CLK ] = &gcc_pcie3_axi_s_clk.clkr, + [PCIE0_PIPE_CLK_SRC ] = &pcie0_pipe_clk_src.clkr, + [PCIE1_PIPE_CLK_SRC ] = &pcie1_pipe_clk_src.clkr, + [PCIE2_PIPE_CLK_SRC ] = &pcie2_pipe_clk_src.clkr, + [PCIE3_PIPE_CLK_SRC ] = &pcie3_pipe_clk_src.clkr, + [PCIE_AUX_CLK_SRC ] = &pcie_aux_clk_src.clkr, + [GCC_PCIE0_AUX_CLK ] = &gcc_pcie0_aux_clk.clkr, + [GCC_PCIE1_AUX_CLK ] = &gcc_pcie1_aux_clk.clkr, + [GCC_PCIE2_AUX_CLK ] = &gcc_pcie2_aux_clk.clkr, + [GCC_PCIE3_AUX_CLK ] = &gcc_pcie3_aux_clk.clkr, + [PCIE0_RCHNG_CLK_SRC ] = &pcie0_rchng_clk_src.clkr, + [GCC_PCIE0_RCHNG_CLK ] = &gcc_pcie0_rchng_clk.clkr, + [PCIE1_RCHNG_CLK_SRC ] = &pcie1_rchng_clk_src.clkr, + [GCC_PCIE1_RCHNG_CLK ] = &gcc_pcie1_rchng_clk.clkr, + [PCIE2_RCHNG_CLK_SRC ] = &pcie2_rchng_clk_src.clkr, + [GCC_PCIE2_RCHNG_CLK ] = &gcc_pcie2_rchng_clk.clkr, + [PCIE3_RCHNG_CLK_SRC ] = &pcie3_rchng_clk_src.clkr, + [GCC_PCIE3_RCHNG_CLK ] = &gcc_pcie3_rchng_clk.clkr, + [GCC_PCIE0_AHB_CLK ] = &gcc_pcie0_ahb_clk.clkr, + [GCC_PCIE1_AHB_CLK ] = &gcc_pcie1_ahb_clk.clkr, + [GCC_PCIE2_AHB_CLK ] = &gcc_pcie2_ahb_clk.clkr, + [GCC_PCIE3_AHB_CLK ] = &gcc_pcie3_ahb_clk.clkr, + [USB0_AUX_CLK_SRC ] = &usb0_aux_clk_src.clkr, + [GCC_USB0_AUX_CLK ] = &gcc_usb0_aux_clk.clkr, + [USB0_MASTER_CLK_SRC ] = &usb0_master_clk_src.clkr, + [GCC_USB0_MASTER_CLK ] = &gcc_usb0_master_clk.clkr, + [GCC_SNOC_USB_CLK ] = &gcc_snoc_usb_clk.clkr, + [GCC_ANOC_USB_AXI_CLK ] = &gcc_anoc_usb_axi_clk.clkr, + [USB0_MOCK_UTMI_CLK_SRC ] = &usb0_mock_utmi_clk_src.clkr, + [USB0_MOCK_UTMI_DIV_CLK_SRC ] = &usb0_mock_utmi_div_clk_src.clkr, + [GCC_USB0_MOCK_UTMI_CLK ] = &gcc_usb0_mock_utmi_clk.clkr, + [USB0_PIPE_CLK_SRC ] = &usb0_pipe_clk_src.clkr, + [GCC_USB0_PHY_CFG_AHB_CLK ] = &gcc_usb0_phy_cfg_ahb_clk.clkr, + [SDCC1_APPS_CLK_SRC ] = &sdcc1_apps_clk_src.clkr, + [GCC_SDCC1_APPS_CLK ] = &gcc_sdcc1_apps_clk.clkr, + [SDCC1_ICE_CORE_CLK_SRC ] = &sdcc1_ice_core_clk_src.clkr, + [GCC_SDCC1_ICE_CORE_CLK ] = &gcc_sdcc1_ice_core_clk.clkr, + [GCC_SDCC1_AHB_CLK ] = &gcc_sdcc1_ahb_clk.clkr, + [PCNOC_BFDCD_CLK_SRC ] = &pcnoc_bfdcd_clk_src.clkr, + [GCC_NSSCFG_CLK ] = &gcc_nsscfg_clk.clkr, + [GCC_NSSNOC_NSSCC_CLK ] = &gcc_nssnoc_nsscc_clk.clkr, + [GCC_NSSCC_CLK ] = &gcc_nsscc_clk.clkr, + [GCC_NSSNOC_PCNOC_1_CLK ] = &gcc_nssnoc_pcnoc_1_clk.clkr, + [GCC_QDSS_DAP_AHB_CLK ] = &gcc_qdss_dap_ahb_clk.clkr, + [GCC_QDSS_CFG_AHB_CLK ] = &gcc_qdss_cfg_ahb_clk.clkr, + [GCC_SNOC_PCNOC_AHB_CLK ] = &gcc_snoc_pcnoc_ahb_clk.clkr, + [GCC_ANOC_PCNOC_AHB_CLK ] = &gcc_anoc_pcnoc_ahb_clk.clkr, + [GCC_QPIC_AHB_CLK ] = &gcc_qpic_ahb_clk.clkr, + [GCC_QPIC_CLK ] = &gcc_qpic_clk.clkr, + [GCC_BLSP1_AHB_CLK ] = &gcc_blsp1_ahb_clk.clkr, + [GCC_MDIO_AHB_CLK ] = &gcc_mdio_ahb_clk.clkr, + [GCC_PRNG_AHB_CLK ] = &gcc_prng_ahb_clk.clkr, + [GCC_UNIPHY0_AHB_CLK ] = &gcc_uniphy0_ahb_clk.clkr, + [GCC_UNIPHY1_AHB_CLK ] = &gcc_uniphy1_ahb_clk.clkr, + [GCC_UNIPHY2_AHB_CLK ] = &gcc_uniphy2_ahb_clk.clkr, + [GCC_CMN_12GPLL_AHB_CLK ] = &gcc_cmn_12gpll_ahb_clk.clkr, + [GCC_CMN_12GPLL_APU_CLK ] = &gcc_cmn_12gpll_apu_clk.clkr, + [SYSTEM_NOC_BFDCD_CLK_SRC ] = &system_noc_bfdcd_clk_src.clkr, + [GCC_NSSNOC_SNOC_CLK ] = &gcc_nssnoc_snoc_clk.clkr, + [GCC_NSSNOC_SNOC_1_CLK ] = &gcc_nssnoc_snoc_1_clk.clkr, + [GCC_QDSS_ETR_USB_CLK ] = &gcc_qdss_etr_usb_clk.clkr, + [GCC_SYS_NOC_AXI_CLK ] = &gcc_sys_noc_axi_clk.clkr, + [GCC_ANOC0_AXI_CLK ] = &gcc_anoc0_axi_clk.clkr, + [GCC_ANOC1_AXI_CLK ] = &gcc_anoc1_axi_clk.clkr, + [GCC_ANOC0_TBU_CLK ] = &gcc_anoc0_tbu_clk.clkr, + [GCC_ANOC1_TBU_CLK ] = &gcc_anoc1_tbu_clk.clkr, + [GCC_MEM_NOC_SNOC_AXI_CLK ] = &gcc_mem_noc_snoc_axi_clk.clkr, + [GCC_IMEM_AXI_CLK ] = &gcc_imem_axi_clk.clkr, + [WCSS_AHB_CLK_SRC ] = &wcss_ahb_clk_src.clkr, + [GCC_Q6_AHB_CLK ] = &gcc_q6_ahb_clk.clkr, + [GCC_Q6_AHB_S_CLK ] = &gcc_q6_ahb_s_clk.clkr, + [GCC_WCSS_ECAHB_CLK ] = &gcc_wcss_ecahb_clk.clkr, + [GCC_WCSS_ACMT_CLK ] = &gcc_wcss_acmt_clk.clkr, + [GCC_SYS_NOC_WCSS_AHB_CLK ] = &gcc_sys_noc_wcss_ahb_clk.clkr, + [WCSS_AXI_M_CLK_SRC ] = &wcss_axi_m_clk_src.clkr, + [GCC_ANOC_WCSS_AXI_M_CLK ] = &gcc_anoc_wcss_axi_m_clk.clkr, + [QDSS_AT_CLK_SRC ] = &qdss_at_clk_src.clkr, + [GCC_Q6SS_ATBM_CLK ] = &gcc_q6ss_atbm_clk.clkr, + [GCC_WCSS_DBG_IFC_ATB_CLK ] = &gcc_wcss_dbg_ifc_atb_clk.clkr, + [GCC_NSSNOC_ATB_CLK ] = &gcc_nssnoc_atb_clk.clkr, + [GCC_QDSS_AT_CLK ] = &gcc_qdss_at_clk.clkr, + [GCC_SYS_NOC_AT_CLK ] = &gcc_sys_noc_at_clk.clkr, + [GCC_PCNOC_AT_CLK ] = &gcc_pcnoc_at_clk.clkr, + [GCC_USB0_EUD_AT_CLK ] = &gcc_usb0_eud_at_clk.clkr, + [GCC_QDSS_EUD_AT_CLK ] = &gcc_qdss_eud_at_clk.clkr, + [QDSS_STM_CLK_SRC ] = &qdss_stm_clk_src.clkr, + [GCC_QDSS_STM_CLK ] = &gcc_qdss_stm_clk.clkr, + [GCC_SYS_NOC_QDSS_STM_AXI_CLK ] = &gcc_sys_noc_qdss_stm_axi_clk.clkr, + [QDSS_TRACECLKIN_CLK_SRC ] = &qdss_traceclkin_clk_src.clkr, + [GCC_QDSS_TRACECLKIN_CLK ] = &gcc_qdss_traceclkin_clk.clkr, + [QDSS_TSCTR_CLK_SRC ] = &qdss_tsctr_clk_src.clkr, + [GCC_Q6_TSCTR_1TO2_CLK ] = &gcc_q6_tsctr_1to2_clk.clkr, + [GCC_WCSS_DBG_IFC_NTS_CLK ] = &gcc_wcss_dbg_ifc_nts_clk.clkr, + [GCC_QDSS_TSCTR_DIV2_CLK ] = &gcc_qdss_tsctr_div2_clk.clkr, + [GCC_QDSS_TS_CLK ] = &gcc_qdss_ts_clk.clkr, + [GCC_SNOC_TS_CLK ] = &gcc_snoc_ts_clk.clkr, + [GCC_MEM_NOC_TS_CLK ] = &gcc_mem_noc_ts_clk.clkr, + [GCC_QDSS_TSCTR_DIV4_CLK ] = &gcc_qdss_tsctr_div4_clk.clkr, + [GCC_NSS_TS_CLK ] = &gcc_nss_ts_clk.clkr, + [GCC_QDSS_TSCTR_DIV8_CLK ] = &gcc_qdss_tsctr_div8_clk.clkr, + [GCC_PCNOC_TS_CLK ] = &gcc_pcnoc_ts_clk.clkr, + [GCC_QDSS_TSCTR_DIV16_CLK ] = &gcc_qdss_tsctr_div16_clk.clkr, + [GCC_Q6SS_PCLKDBG_CLK ] = &gcc_q6ss_pclkdbg_clk.clkr, + [GCC_Q6SS_TRIG_CLK ] = &gcc_q6ss_trig_clk.clkr, + [GCC_WCSS_DBG_IFC_APB_CLK ] = &gcc_wcss_dbg_ifc_apb_clk.clkr, + [GCC_WCSS_DBG_IFC_DAPBUS_CLK ] = &gcc_wcss_dbg_ifc_dapbus_clk.clkr, + [GCC_QDSS_DAP_CLK ] = &gcc_qdss_dap_clk.clkr, + [GCC_QDSS_APB2JTAG_CLK ] = &gcc_qdss_apb2jtag_clk.clkr, + [GCC_QDSS_TSCTR_DIV3_CLK ] = &gcc_qdss_tsctr_div3_clk.clkr, + [QPIC_IO_MACRO_CLK_SRC ] = &qpic_io_macro_clk_src.clkr, + [GCC_QPIC_IO_MACRO_CLK ] = &gcc_qpic_io_macro_clk.clkr, + [Q6_AXI_CLK_SRC ] = &q6_axi_clk_src.clkr, + [GCC_Q6_AXIM_CLK ] = &gcc_q6_axim_clk.clkr, + [GCC_WCSS_Q6_TBU_CLK ] = &gcc_wcss_q6_tbu_clk.clkr, + [GCC_MEM_NOC_Q6_AXI_CLK ] = &gcc_mem_noc_q6_axi_clk.clkr, + [Q6_AXIM2_CLK_SRC ] = &q6_axim2_clk_src.clkr, + [NSSNOC_MEMNOC_BFDCD_CLK_SRC ] = &nssnoc_memnoc_bfdcd_clk_src.clkr, + [GCC_NSSNOC_MEMNOC_CLK ] = &gcc_nssnoc_memnoc_clk.clkr, + [GCC_NSSNOC_MEM_NOC_1_CLK ] = &gcc_nssnoc_mem_noc_1_clk.clkr, + [GCC_NSS_TBU_CLK ] = &gcc_nss_tbu_clk.clkr, + [GCC_MEM_NOC_NSSNOC_CLK ] = &gcc_mem_noc_nssnoc_clk.clkr, + [LPASS_AXIM_CLK_SRC ] = &lpass_axim_clk_src.clkr, + [LPASS_SWAY_CLK_SRC ] = &lpass_sway_clk_src.clkr, + [ADSS_PWM_CLK_SRC ] = &adss_pwm_clk_src.clkr, + [GCC_ADSS_PWM_CLK ] = &gcc_adss_pwm_clk.clkr, + [GP1_CLK_SRC ] = &gp1_clk_src.clkr, + [GP2_CLK_SRC ] = &gp2_clk_src.clkr, + [GP3_CLK_SRC ] = &gp3_clk_src.clkr, + [GCC_XO_CLK_SRC ] = &gcc_xo_clk_src.clkr, + [GCC_NSSNOC_XO_DCD_CLK ] = &gcc_nssnoc_xo_dcd_clk.clkr, + [GCC_XO_CLK ] = &gcc_xo_clk.clkr, + [GCC_NSSNOC_QOSGEN_REF_CLK ] = &gcc_nssnoc_qosgen_ref_clk.clkr, + [GCC_NSSNOC_TIMEOUT_REF_CLK ] = &gcc_nssnoc_timeout_ref_clk.clkr, + [GCC_XO_DIV4_CLK ] = &gcc_xo_div4_clk.clkr, + [GCC_UNIPHY0_SYS_CLK ] = &gcc_uniphy0_sys_clk.clkr, + [GCC_UNIPHY1_SYS_CLK ] = &gcc_uniphy1_sys_clk.clkr, + [GCC_UNIPHY2_SYS_CLK ] = &gcc_uniphy2_sys_clk.clkr, + [GCC_CMN_12GPLL_SYS_CLK ] = &gcc_cmn_12gpll_sys_clk.clkr, + [GCC_Q6SS_BOOT_CLK ] = &gcc_q6ss_boot_clk.clkr, + [UNIPHY_SYS_CLK_SRC ] = &uniphy_sys_clk_src.clkr, + [NSS_TS_CLK_SRC ] = &nss_ts_clk_src.clkr, + [GCC_ANOC_PCIE0_1LANE_M_CLK ] = &gcc_anoc_pcie0_1lane_m_clk.clkr, + [GCC_ANOC_PCIE1_1LANE_M_CLK ] = &gcc_anoc_pcie1_1lane_m_clk.clkr, + [GCC_ANOC_PCIE2_2LANE_M_CLK ] = &gcc_anoc_pcie2_2lane_m_clk.clkr, + [GCC_ANOC_PCIE3_2LANE_M_CLK ] = &gcc_anoc_pcie3_2lane_m_clk.clkr, + [GCC_SNOC_PCIE0_1LANE_S_CLK ] = &gcc_snoc_pcie0_1lane_s_clk.clkr, + [GCC_SNOC_PCIE1_1LANE_S_CLK ] = &gcc_snoc_pcie1_1lane_s_clk.clkr, + [GCC_SNOC_PCIE2_2LANE_S_CLK ] = &gcc_snoc_pcie2_2lane_s_clk.clkr, + [GCC_SNOC_PCIE3_2LANE_S_CLK ] = &gcc_snoc_pcie3_2lane_s_clk.clkr, + [GCC_PCNOC_DCC_CLK ] = &gcc_pcnoc_dcc_clk.clkr, +}; + +static struct clk_regmap *gcc_ipq9574_dummy_clks[] = { + [GPLL0_MAIN ] =DEFINE_DUMMY_CLK (gpll0_main), + [GPLL0 ] =DEFINE_DUMMY_CLK (gpll0), + [GPLL4_MAIN ] =DEFINE_DUMMY_CLK (gpll4_main), + [GPLL4 ] =DEFINE_DUMMY_CLK (gpll4), + [GPLL2_MAIN ] =DEFINE_DUMMY_CLK (gpll2_main), + [GPLL2 ] =DEFINE_DUMMY_CLK (gpll2), + [GCC_SLEEP_CLK_SRC ] =DEFINE_DUMMY_CLK (gcc_sleep_clk_src), + [APSS_AHB_CLK_SRC ] =DEFINE_DUMMY_CLK (apss_ahb_clk_src), + [APSS_AXI_CLK_SRC ] =DEFINE_DUMMY_CLK (apss_axi_clk_src), + [BLSP1_QUP1_I2C_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_qup1_i2c_apps_clk_src), + [BLSP1_QUP1_SPI_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_qup1_spi_apps_clk_src), + [BLSP1_QUP2_I2C_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_qup2_i2c_apps_clk_src), + [BLSP1_QUP2_SPI_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_qup2_spi_apps_clk_src), + [BLSP1_QUP3_I2C_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_qup3_i2c_apps_clk_src), + [BLSP1_QUP3_SPI_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_qup3_spi_apps_clk_src), + [BLSP1_QUP4_I2C_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_qup4_i2c_apps_clk_src), + [BLSP1_QUP4_SPI_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_qup4_spi_apps_clk_src), + [BLSP1_QUP5_I2C_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_qup5_i2c_apps_clk_src), + [BLSP1_QUP5_SPI_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_qup5_spi_apps_clk_src), + [BLSP1_QUP6_I2C_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_qup6_i2c_apps_clk_src), + [BLSP1_QUP6_SPI_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_qup6_spi_apps_clk_src), + [BLSP1_UART1_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_uart1_apps_clk_src), + [BLSP1_UART2_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_uart2_apps_clk_src), + [BLSP1_UART3_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_uart3_apps_clk_src), + [BLSP1_UART4_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_uart4_apps_clk_src), + [BLSP1_UART5_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_uart5_apps_clk_src), + [BLSP1_UART6_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (blsp1_uart6_apps_clk_src), + [GCC_APSS_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_apss_ahb_clk), + [GCC_APSS_AXI_CLK ] =DEFINE_DUMMY_CLK (gcc_apss_axi_clk), + [GCC_BLSP1_QUP1_I2C_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_qup1_i2c_apps_clk), + [GCC_BLSP1_QUP1_SPI_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_qup1_spi_apps_clk), + [GCC_BLSP1_QUP2_I2C_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_qup2_i2c_apps_clk), + [GCC_BLSP1_QUP2_SPI_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_qup2_spi_apps_clk), + [GCC_BLSP1_QUP3_I2C_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_qup3_i2c_apps_clk), + [GCC_BLSP1_QUP3_SPI_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_qup3_spi_apps_clk), + [GCC_BLSP1_QUP4_I2C_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_qup4_i2c_apps_clk), + [GCC_BLSP1_QUP4_SPI_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_qup4_spi_apps_clk), + [GCC_BLSP1_QUP5_I2C_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_qup5_i2c_apps_clk), + [GCC_BLSP1_QUP5_SPI_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_qup5_spi_apps_clk), + [GCC_BLSP1_QUP6_I2C_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_qup6_i2c_apps_clk), + [GCC_BLSP1_QUP6_SPI_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_qup6_spi_apps_clk), + [GCC_BLSP1_UART1_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_uart1_apps_clk), + [GCC_BLSP1_UART2_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_uart2_apps_clk), + [GCC_BLSP1_UART3_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_uart3_apps_clk), + [GCC_BLSP1_UART4_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_uart4_apps_clk), + [GCC_BLSP1_UART5_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_uart5_apps_clk), + [GCC_BLSP1_UART6_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_uart6_apps_clk), + [PCIE0_AXI_M_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie0_axi_m_clk_src), + [GCC_PCIE0_AXI_M_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie0_axi_m_clk), + [PCIE1_AXI_M_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie1_axi_m_clk_src), + [GCC_PCIE1_AXI_M_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie1_axi_m_clk), + [PCIE2_AXI_M_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie2_axi_m_clk_src), + [GCC_PCIE2_AXI_M_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie2_axi_m_clk), + [PCIE3_AXI_M_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie3_axi_m_clk_src), + [GCC_PCIE3_AXI_M_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie3_axi_m_clk), + [PCIE0_AXI_S_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie0_axi_s_clk_src), + [GCC_PCIE0_AXI_S_BRIDGE_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie0_axi_s_bridge_clk), + [GCC_PCIE0_AXI_S_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie0_axi_s_clk), + [PCIE1_AXI_S_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie1_axi_s_clk_src), + [GCC_PCIE1_AXI_S_BRIDGE_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie1_axi_s_bridge_clk), + [GCC_PCIE1_AXI_S_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie1_axi_s_clk), + [PCIE2_AXI_S_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie2_axi_s_clk_src), + [GCC_PCIE2_AXI_S_BRIDGE_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie2_axi_s_bridge_clk), + [GCC_PCIE2_AXI_S_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie2_axi_s_clk), + [PCIE3_AXI_S_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie3_axi_s_clk_src), + [GCC_PCIE3_AXI_S_BRIDGE_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie3_axi_s_bridge_clk), + [GCC_PCIE3_AXI_S_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie3_axi_s_clk), + [PCIE0_PIPE_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie0_pipe_clk_src), + [PCIE1_PIPE_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie1_pipe_clk_src), + [PCIE2_PIPE_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie2_pipe_clk_src), + [PCIE3_PIPE_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie3_pipe_clk_src), + [PCIE_AUX_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie_aux_clk_src), + [GCC_PCIE0_AUX_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie0_aux_clk), + [GCC_PCIE1_AUX_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie1_aux_clk), + [GCC_PCIE2_AUX_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie2_aux_clk), + [GCC_PCIE3_AUX_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie3_aux_clk), + [PCIE0_RCHNG_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie0_rchng_clk_src), + [GCC_PCIE0_RCHNG_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie0_rchng_clk), + [PCIE1_RCHNG_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie1_rchng_clk_src), + [GCC_PCIE1_RCHNG_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie1_rchng_clk), + [PCIE2_RCHNG_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie2_rchng_clk_src), + [GCC_PCIE2_RCHNG_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie2_rchng_clk), + [PCIE3_RCHNG_CLK_SRC ] =DEFINE_DUMMY_CLK (pcie3_rchng_clk_src), + [GCC_PCIE3_RCHNG_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie3_rchng_clk), + [GCC_PCIE0_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie0_ahb_clk), + [GCC_PCIE1_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie1_ahb_clk), + [GCC_PCIE2_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie2_ahb_clk), + [GCC_PCIE3_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_pcie3_ahb_clk), + [USB0_AUX_CLK_SRC ] =DEFINE_DUMMY_CLK (usb0_aux_clk_src), + [GCC_USB0_AUX_CLK ] =DEFINE_DUMMY_CLK (gcc_usb0_aux_clk), + [USB0_MASTER_CLK_SRC ] =DEFINE_DUMMY_CLK (usb0_master_clk_src), + [GCC_USB0_MASTER_CLK ] =DEFINE_DUMMY_CLK (gcc_usb0_master_clk), + [GCC_SNOC_USB_CLK ] =DEFINE_DUMMY_CLK (gcc_snoc_usb_clk), + [GCC_ANOC_USB_AXI_CLK ] =DEFINE_DUMMY_CLK (gcc_anoc_usb_axi_clk), + [USB0_MOCK_UTMI_CLK_SRC ] =DEFINE_DUMMY_CLK (usb0_mock_utmi_clk_src), + [USB0_MOCK_UTMI_DIV_CLK_SRC ] =DEFINE_DUMMY_CLK (usb0_mock_utmi_div_clk_src), + [GCC_USB0_MOCK_UTMI_CLK ] =DEFINE_DUMMY_CLK (gcc_usb0_mock_utmi_clk), + [USB0_PIPE_CLK_SRC ] =DEFINE_DUMMY_CLK (usb0_pipe_clk_src), + [GCC_USB0_PHY_CFG_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_usb0_phy_cfg_ahb_clk), + [SDCC1_APPS_CLK_SRC ] =DEFINE_DUMMY_CLK (sdcc1_apps_clk_src), + [GCC_SDCC1_APPS_CLK ] =DEFINE_DUMMY_CLK (gcc_sdcc1_apps_clk), + [SDCC1_ICE_CORE_CLK_SRC ] =DEFINE_DUMMY_CLK (sdcc1_ice_core_clk_src), + [GCC_SDCC1_ICE_CORE_CLK ] =DEFINE_DUMMY_CLK (gcc_sdcc1_ice_core_clk), + [GCC_SDCC1_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_sdcc1_ahb_clk), + [PCNOC_BFDCD_CLK_SRC ] =DEFINE_DUMMY_CLK (pcnoc_bfdcd_clk_src), + [GCC_NSSCFG_CLK ] =DEFINE_DUMMY_CLK (gcc_nsscfg_clk), + [GCC_NSSNOC_NSSCC_CLK ] =DEFINE_DUMMY_CLK (gcc_nssnoc_nsscc_clk), + [GCC_NSSCC_CLK ] =DEFINE_DUMMY_CLK (gcc_nsscc_clk), + [GCC_NSSNOC_PCNOC_1_CLK ] =DEFINE_DUMMY_CLK (gcc_nssnoc_pcnoc_1_clk), + [GCC_QDSS_DAP_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_dap_ahb_clk), + [GCC_QDSS_CFG_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_cfg_ahb_clk), + [GCC_SNOC_PCNOC_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_snoc_pcnoc_ahb_clk), + [GCC_ANOC_PCNOC_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_anoc_pcnoc_ahb_clk), + [GCC_QPIC_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_qpic_ahb_clk), + [GCC_QPIC_CLK ] =DEFINE_DUMMY_CLK (gcc_qpic_clk), + [GCC_BLSP1_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_blsp1_ahb_clk), + [GCC_MDIO_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_mdio_ahb_clk), + [GCC_PRNG_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_prng_ahb_clk), + [GCC_UNIPHY0_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_uniphy0_ahb_clk), + [GCC_UNIPHY1_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_uniphy1_ahb_clk), + [GCC_UNIPHY2_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_uniphy2_ahb_clk), + [GCC_CMN_12GPLL_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_cmn_12gpll_ahb_clk), + [GCC_CMN_12GPLL_APU_CLK ] =DEFINE_DUMMY_CLK (gcc_cmn_12gpll_apu_clk), + [SYSTEM_NOC_BFDCD_CLK_SRC ] =DEFINE_DUMMY_CLK (system_noc_bfdcd_clk_src), + [GCC_NSSNOC_SNOC_CLK ] =DEFINE_DUMMY_CLK (gcc_nssnoc_snoc_clk), + [GCC_NSSNOC_SNOC_1_CLK ] =DEFINE_DUMMY_CLK (gcc_nssnoc_snoc_1_clk), + [GCC_QDSS_ETR_USB_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_etr_usb_clk), + [GCC_SYS_NOC_AXI_CLK ] =DEFINE_DUMMY_CLK (gcc_sys_noc_axi_clk), + [GCC_ANOC0_AXI_CLK ] =DEFINE_DUMMY_CLK (gcc_anoc0_axi_clk), + [GCC_ANOC1_AXI_CLK ] =DEFINE_DUMMY_CLK (gcc_anoc1_axi_clk), + [GCC_ANOC0_TBU_CLK ] =DEFINE_DUMMY_CLK (gcc_anoc0_tbu_clk), + [GCC_ANOC1_TBU_CLK ] =DEFINE_DUMMY_CLK (gcc_anoc1_tbu_clk), + [GCC_MEM_NOC_SNOC_AXI_CLK ] =DEFINE_DUMMY_CLK (gcc_mem_noc_snoc_axi_clk), + [GCC_IMEM_AXI_CLK ] =DEFINE_DUMMY_CLK (gcc_imem_axi_clk), + [WCSS_AHB_CLK_SRC ] =DEFINE_DUMMY_CLK (wcss_ahb_clk_src), + [GCC_Q6_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_q6_ahb_clk), + [GCC_Q6_AHB_S_CLK ] =DEFINE_DUMMY_CLK (gcc_q6_ahb_s_clk), + [GCC_WCSS_ECAHB_CLK ] =DEFINE_DUMMY_CLK (gcc_wcss_ecahb_clk), + [GCC_WCSS_ACMT_CLK ] =DEFINE_DUMMY_CLK (gcc_wcss_acmt_clk), + [GCC_SYS_NOC_WCSS_AHB_CLK ] =DEFINE_DUMMY_CLK (gcc_sys_noc_wcss_ahb_clk), + [WCSS_AXI_M_CLK_SRC ] =DEFINE_DUMMY_CLK (wcss_axi_m_clk_src), + [GCC_ANOC_WCSS_AXI_M_CLK ] =DEFINE_DUMMY_CLK (gcc_anoc_wcss_axi_m_clk), + [QDSS_AT_CLK_SRC ] =DEFINE_DUMMY_CLK (qdss_at_clk_src), + [GCC_Q6SS_ATBM_CLK ] =DEFINE_DUMMY_CLK (gcc_q6ss_atbm_clk), + [GCC_WCSS_DBG_IFC_ATB_CLK ] =DEFINE_DUMMY_CLK (gcc_wcss_dbg_ifc_atb_clk), + [GCC_NSSNOC_ATB_CLK ] =DEFINE_DUMMY_CLK (gcc_nssnoc_atb_clk), + [GCC_QDSS_AT_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_at_clk), + [GCC_SYS_NOC_AT_CLK ] =DEFINE_DUMMY_CLK (gcc_sys_noc_at_clk), + [GCC_PCNOC_AT_CLK ] =DEFINE_DUMMY_CLK (gcc_pcnoc_at_clk), + [GCC_USB0_EUD_AT_CLK ] =DEFINE_DUMMY_CLK (gcc_usb0_eud_at_clk), + [GCC_QDSS_EUD_AT_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_eud_at_clk), + [QDSS_STM_CLK_SRC ] =DEFINE_DUMMY_CLK (qdss_stm_clk_src), + [GCC_QDSS_STM_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_stm_clk), + [GCC_SYS_NOC_QDSS_STM_AXI_CLK ] =DEFINE_DUMMY_CLK (gcc_sys_noc_qdss_stm_axi_clk), + [QDSS_TRACECLKIN_CLK_SRC ] =DEFINE_DUMMY_CLK (qdss_traceclkin_clk_src), + [GCC_QDSS_TRACECLKIN_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_traceclkin_clk), + [QDSS_TSCTR_CLK_SRC ] =DEFINE_DUMMY_CLK (qdss_tsctr_clk_src), + [GCC_Q6_TSCTR_1TO2_CLK ] =DEFINE_DUMMY_CLK (gcc_q6_tsctr_1to2_clk), + [GCC_WCSS_DBG_IFC_NTS_CLK ] =DEFINE_DUMMY_CLK (gcc_wcss_dbg_ifc_nts_clk), + [GCC_QDSS_TSCTR_DIV2_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_tsctr_div2_clk), + [GCC_QDSS_TS_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_ts_clk), + [GCC_SNOC_TS_CLK ] =DEFINE_DUMMY_CLK (gcc_snoc_ts_clk), + [GCC_MEM_NOC_TS_CLK ] =DEFINE_DUMMY_CLK (gcc_mem_noc_ts_clk), + [GCC_QDSS_TSCTR_DIV4_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_tsctr_div4_clk), + [GCC_NSS_TS_CLK ] =DEFINE_DUMMY_CLK (gcc_nss_ts_clk), + [GCC_QDSS_TSCTR_DIV8_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_tsctr_div8_clk), + [GCC_PCNOC_TS_CLK ] =DEFINE_DUMMY_CLK (gcc_pcnoc_ts_clk), + [GCC_QDSS_TSCTR_DIV16_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_tsctr_div16_clk), + [GCC_Q6SS_PCLKDBG_CLK ] =DEFINE_DUMMY_CLK (gcc_q6ss_pclkdbg_clk), + [GCC_Q6SS_TRIG_CLK ] =DEFINE_DUMMY_CLK (gcc_q6ss_trig_clk), + [GCC_WCSS_DBG_IFC_APB_CLK ] =DEFINE_DUMMY_CLK (gcc_wcss_dbg_ifc_apb_clk), + [GCC_WCSS_DBG_IFC_DAPBUS_CLK ] =DEFINE_DUMMY_CLK (gcc_wcss_dbg_ifc_dapbus_clk), + [GCC_QDSS_DAP_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_dap_clk), + [GCC_QDSS_APB2JTAG_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_apb2jtag_clk), + [GCC_QDSS_TSCTR_DIV3_CLK ] =DEFINE_DUMMY_CLK (gcc_qdss_tsctr_div3_clk), + [QPIC_IO_MACRO_CLK_SRC ] =DEFINE_DUMMY_CLK (qpic_io_macro_clk_src), + [GCC_QPIC_IO_MACRO_CLK ] =DEFINE_DUMMY_CLK (gcc_qpic_io_macro_clk), + [Q6_AXI_CLK_SRC ] =DEFINE_DUMMY_CLK (q6_axi_clk_src), + [GCC_Q6_AXIM_CLK ] =DEFINE_DUMMY_CLK (gcc_q6_axim_clk), + [GCC_WCSS_Q6_TBU_CLK ] =DEFINE_DUMMY_CLK (gcc_wcss_q6_tbu_clk), + [GCC_MEM_NOC_Q6_AXI_CLK ] =DEFINE_DUMMY_CLK (gcc_mem_noc_q6_axi_clk), + [Q6_AXIM2_CLK_SRC ] =DEFINE_DUMMY_CLK (q6_axim2_clk_src), + [NSSNOC_MEMNOC_BFDCD_CLK_SRC ] =DEFINE_DUMMY_CLK (nssnoc_memnoc_bfdcd_clk_src), + [GCC_NSSNOC_MEMNOC_CLK ] =DEFINE_DUMMY_CLK (gcc_nssnoc_memnoc_clk), + [GCC_NSSNOC_MEM_NOC_1_CLK ] =DEFINE_DUMMY_CLK (gcc_nssnoc_mem_noc_1_clk), + [GCC_NSS_TBU_CLK ] =DEFINE_DUMMY_CLK (gcc_nss_tbu_clk), + [GCC_MEM_NOC_NSSNOC_CLK ] =DEFINE_DUMMY_CLK (gcc_mem_noc_nssnoc_clk), + [LPASS_AXIM_CLK_SRC ] =DEFINE_DUMMY_CLK (lpass_axim_clk_src), + [LPASS_SWAY_CLK_SRC ] =DEFINE_DUMMY_CLK (lpass_sway_clk_src), + [ADSS_PWM_CLK_SRC ] =DEFINE_DUMMY_CLK (adss_pwm_clk_src), + [GCC_ADSS_PWM_CLK ] =DEFINE_DUMMY_CLK (gcc_adss_pwm_clk), + [GP1_CLK_SRC ] =DEFINE_DUMMY_CLK (gp1_clk_src), + [GP2_CLK_SRC ] =DEFINE_DUMMY_CLK (gp2_clk_src), + [GP3_CLK_SRC ] =DEFINE_DUMMY_CLK (gp3_clk_src), + [DDRSS_SMS_SLOW_CLK_SRC ] =DEFINE_DUMMY_CLK (ddrss_sms_slow_clk_src), + [GCC_XO_CLK_SRC ] =DEFINE_DUMMY_CLK (gcc_xo_clk_src), + [GCC_NSSNOC_XO_DCD_CLK ] =DEFINE_DUMMY_CLK (gcc_nssnoc_xo_dcd_clk), + [GCC_XO_CLK ] =DEFINE_DUMMY_CLK (gcc_xo_clk), + [GCC_NSSNOC_QOSGEN_REF_CLK ] =DEFINE_DUMMY_CLK (gcc_nssnoc_qosgen_ref_clk), + [GCC_NSSNOC_TIMEOUT_REF_CLK ] =DEFINE_DUMMY_CLK (gcc_nssnoc_timeout_ref_clk), + [GCC_XO_DIV4_CLK ] =DEFINE_DUMMY_CLK (gcc_xo_div4_clk), + [GCC_UNIPHY0_SYS_CLK ] =DEFINE_DUMMY_CLK (gcc_uniphy0_sys_clk), + [GCC_UNIPHY1_SYS_CLK ] =DEFINE_DUMMY_CLK (gcc_uniphy1_sys_clk), + [GCC_UNIPHY2_SYS_CLK ] =DEFINE_DUMMY_CLK (gcc_uniphy2_sys_clk), + [GCC_CMN_12GPLL_SYS_CLK ] =DEFINE_DUMMY_CLK (gcc_cmn_12gpll_sys_clk), + [GCC_Q6SS_BOOT_CLK ] =DEFINE_DUMMY_CLK (gcc_q6ss_boot_clk), + [UNIPHY_SYS_CLK_SRC ] =DEFINE_DUMMY_CLK (uniphy_sys_clk_src), + [NSS_TS_CLK_SRC ] =DEFINE_DUMMY_CLK (nss_ts_clk_src), + [GCC_ANOC_PCIE0_1LANE_M_CLK ] =DEFINE_DUMMY_CLK (gcc_anoc_pcie0_1lane_m_clk), + [GCC_ANOC_PCIE1_1LANE_M_CLK ] =DEFINE_DUMMY_CLK (gcc_anoc_pcie1_1lane_m_clk), + [GCC_ANOC_PCIE2_2LANE_M_CLK ] =DEFINE_DUMMY_CLK (gcc_anoc_pcie2_2lane_m_clk),
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 4472
Quoted 7 lines
drivers/clk/qcom/gcc-ipq9574.c new file +7
-0+ [GCC_ANOC_PCIE3_2LANE_M_CLK] = DEFINE_DUMMY_CLK(gcc_anoc_pcie3_2lane_m_clk), + [GCC_SNOC_PCIE0_1LANE_S_CLK] = DEFINE_DUMMY_CLK(gcc_snoc_pcie0_1lane_s_clk), + [GCC_SNOC_PCIE1_1LANE_S_CLK] = DEFINE_DUMMY_CLK(gcc_snoc_pcie1_1lane_s_clk), + [GCC_SNOC_PCIE2_2LANE_S_CLK] = DEFINE_DUMMY_CLK(gcc_snoc_pcie2_2lane_s_clk), + [GCC_SNOC_PCIE3_2LANE_S_CLK] = DEFINE_DUMMY_CLK(gcc_snoc_pcie3_2lane_s_clk), + [GCC_PCNOC_DCC_CLK] = DEFINE_DUMMY_CLK(gcc_pcnoc_dcc_clk), +};Drop.
Okay
Quoted 211 lines
Quoted 198 lines
drivers/clk/qcom/gcc-ipq9574.c new file +197
-0+ +static const struct qcom_reset_map gcc_ipq9574_resets[] = { + [GCC_ADSS_BCR ] = {0x1c000 ,0 }, + [GCC_ANOC0_TBU_BCR ] = {0x1203C ,0 }, + [GCC_ANOC1_TBU_BCR ] = {0x1204C ,0 }, + [GCC_ANOC_BCR ] = {0x2E074 ,0 }, + [GCC_APC0_VOLTAGE_DROOP_DETECTOR_BCR ] = {0x38000 ,0 }, + [GCC_APSS_TCU_BCR ] = {0x12014 ,0 }, + [GCC_BLSP1_BCR ] = {0x01000 ,0 }, + [GCC_BLSP1_QUP1_BCR ] = {0x02000 ,0 }, + [GCC_BLSP1_QUP2_BCR ] = {0x03000 ,0 }, + [GCC_BLSP1_QUP3_BCR ] = {0x04000 ,0 }, + [GCC_BLSP1_QUP4_BCR ] = {0x05000 ,0 }, + [GCC_BLSP1_QUP5_BCR ] = {0x06000 ,0 }, + [GCC_BLSP1_QUP6_BCR ] = {0x07000 ,0 }, + [GCC_BLSP1_UART1_BCR ] = {0x02028 ,0 }, + [GCC_BLSP1_UART2_BCR ] = {0x03028 ,0 }, + [GCC_BLSP1_UART3_BCR ] = {0x04028 ,0 }, + [GCC_BLSP1_UART4_BCR ] = {0x05028 ,0 }, + [GCC_BLSP1_UART5_BCR ] = {0x06028 ,0 }, + [GCC_BLSP1_UART6_BCR ] = {0x07028 ,0 }, + [GCC_BOOT_ROM_BCR ] = {0x13028 ,0 }, + [GCC_CMN_BLK_BCR ] = {0x3A000 ,0 }, + [GCC_CMN_BLK_AHB_ARES ] = {0x3A010 ,0 }, + [GCC_CMN_BLK_SYS_ARES ] = {0x3A010 ,1 }, + [GCC_CMN_BLK_APU_ARES ] = {0x3A010 ,2 }, + [GCC_DCC_BCR ] = {0x35000 ,0 }, + [GCC_DDRSS_BCR ] = {0x11000 ,0 }, + [GCC_IMEM_BCR ] = {0x0e000 ,0 }, + [GCC_LPASS_BCR ] = {0x27000 ,0 }, + [GCC_MDIO_BCR ] = {0x1703c ,0 }, + [GCC_MPM_BCR ] = {0x37000 ,0 }, + [GCC_MSG_RAM_BCR ] = {0x26000 ,0 }, + [GCC_NSS_BCR ] = {0x17000 ,0 }, + [GCC_NSS_TBU_BCR ] = {0x12044 ,0 }, + [GCC_NSSNOC_MEMNOC_1_ARES ] = {0x17038 ,13 }, + [GCC_NSSNOC_PCNOC_1_ARES ] = {0x17038 ,12 }, + [GCC_NSSNOC_SNOC_1_ARES ] = {0x17038 ,11 }, + [GCC_NSSNOC_XO_DCD_ARES ] = {0x17038 ,10 }, + [GCC_NSSNOC_TS_ARES ] = {0x17038 ,9 }, + [GCC_NSSCC_ARES ] = {0x17038 ,8 }, + [GCC_NSSNOC_NSSCC_ARES ] = {0x17038 ,7 }, + [GCC_NSSNOC_ATB_ARES ] = {0x17038 ,6 }, + [GCC_NSSNOC_MEMNOC_ARES ] = {0x17038 ,5 }, + [GCC_NSSNOC_QOSGEN_REF_ARES ] = {0x17038 ,4 }, + [GCC_NSSNOC_SNOC_ARES ] = {0x17038 ,3 }, + [GCC_NSSNOC_TIMEOUT_REF_ARES ] = {0x17038 ,2 }, + [GCC_NSS_CFG_ARES ] = {0x17038 ,1 }, + [GCC_UBI0_DBG_ARES ] = {0x17038 ,0 }, + [GCC_PCIE0PHY_PHY_BCR ] = {0x2805c ,0 }, + [GCC_PCIE0_AHB_ARES ] = {0x28058 ,7 }, + [GCC_PCIE0_AUX_ARES ] = {0x28058 ,6 }, + [GCC_PCIE0_AXI_M_ARES ] = {0x28058 ,5 }, + [GCC_PCIE0_AXI_M_STICKY_ARES ] = {0x28058 ,4 }, + [GCC_PCIE0_AXI_S_ARES ] = {0x28058 ,3 }, + [GCC_PCIE0_AXI_S_STICKY_ARES ] = {0x28058 ,2 }, + [GCC_PCIE0_CORE_STICKY_ARES ] = {0x28058 ,1 }, + [GCC_PCIE0_PIPE_ARES ] = {0x28058 ,0 }, + [GCC_PCIE1_AHB_ARES ] = {0x29058 ,7 }, + [GCC_PCIE1_AUX_ARES ] = {0x29058 ,6 }, + [GCC_PCIE1_AXI_M_ARES ] = {0x29058 ,5 }, + [GCC_PCIE1_AXI_M_STICKY_ARES ] = {0x29058 ,4 }, + [GCC_PCIE1_AXI_S_ARES ] = {0x29058 ,3 }, + [GCC_PCIE1_AXI_S_STICKY_ARES ] = {0x29058 ,2 }, + [GCC_PCIE1_CORE_STICKY_ARES ] = {0x29058 ,1 }, + [GCC_PCIE1_PIPE_ARES ] = {0x29058 ,0 }, + [GCC_PCIE2_AHB_ARES ] = {0x2A058 ,7 }, + [GCC_PCIE2_AUX_ARES ] = {0x2A058 ,6 }, + [GCC_PCIE2_AXI_M_ARES ] = {0x2A058 ,5 }, + [GCC_PCIE2_AXI_M_STICKY_ARES ] = {0x2A058 ,4 }, + [GCC_PCIE2_AXI_S_ARES ] = {0x2A058 ,3 }, + [GCC_PCIE2_AXI_S_STICKY_ARES ] = {0x2A058 ,2 }, + [GCC_PCIE2_CORE_STICKY_ARES ] = {0x2A058 ,1 }, + [GCC_PCIE2_PIPE_ARES ] = {0x2A058 ,0 }, + [GCC_PCIE3_AHB_ARES ] = {0x2B058 ,7 }, + [GCC_PCIE3_AUX_ARES ] = {0x2B058 ,6 }, + [GCC_PCIE3_AXI_M_ARES ] = {0x2B058 ,5 }, + [GCC_PCIE3_AXI_M_STICKY_ARES ] = {0x2B058 ,4 }, + [GCC_PCIE3_AXI_S_ARES ] = {0x2B058 ,3 }, + [GCC_PCIE3_AXI_S_STICKY_ARES ] = {0x2B058 ,2 }, + [GCC_PCIE3_CORE_STICKY_ARES ] = {0x2B058 ,1 }, + [GCC_PCIE3_PIPE_ARES ] = {0x2B058 ,0 }, + [GCC_PCIE0_BCR ] = {0x28000 ,0 }, + [GCC_PCIE0_LINK_DOWN_BCR ] = {0x28054 ,0 }, + [GCC_PCIE0_PHY_BCR ] = {0x28060 ,0 }, + [GCC_PCIE1_BCR ] = {0x29000 ,0 }, + [GCC_PCIE1_LINK_DOWN_BCR ] = {0x29054 ,0 }, + [GCC_PCIE1_PHY_BCR ] = {0x29060 ,0 }, + [GCC_PCIE1PHY_PHY_BCR ] = {0x2905c ,0 }, + [GCC_PCIE2_BCR ] = {0x2a000 ,0 }, + [GCC_PCIE2_LINK_DOWN_BCR ] = {0x2a054 ,0 }, + [GCC_PCIE2_PHY_BCR ] = {0x2a060 ,0 }, + [GCC_PCIE2PHY_PHY_BCR ] = {0x2a05c ,0 }, + [GCC_PCIE3_BCR ] = {0x2b000 ,0 }, + [GCC_PCIE3_LINK_DOWN_BCR ] = {0x2b054 ,0 }, + [GCC_PCIE3PHY_PHY_BCR ] = {0x2b05c ,0 }, + [GCC_PCIE3_PHY_BCR ] = {0x2B060 ,0 }, + [GCC_PCNOC_BCR ] = {0x31000 ,0 }, + [GCC_PCNOC_BUS_TIMEOUT0_BCR ] = {0x31030 ,0 }, + [GCC_PCNOC_BUS_TIMEOUT1_BCR ] = {0x31038 ,0 }, + [GCC_PCNOC_BUS_TIMEOUT2_BCR ] = {0x31040 ,0 }, + [GCC_PCNOC_BUS_TIMEOUT3_BCR ] = {0x31048 ,0 }, + [GCC_PCNOC_BUS_TIMEOUT4_BCR ] = {0x31050 ,0 }, + [GCC_PCNOC_BUS_TIMEOUT5_BCR ] = {0x31058 ,0 }, + [GCC_PCNOC_BUS_TIMEOUT6_BCR ] = {0x31060 ,0 }, + [GCC_PCNOC_BUS_TIMEOUT7_BCR ] = {0x31068 ,0 }, + [GCC_PCNOC_BUS_TIMEOUT8_BCR ] = {0x31070 ,0 }, + [GCC_PCNOC_BUS_TIMEOUT9_BCR ] = {0x31078 ,0 }, + [GCC_PCNOC_TBU_BCR ] = {0x12034 ,0 }, + [GCC_PRNG_BCR ] = {0x13020 ,0 }, + [GCC_Q6SS_DBG_ARES ] = {0x2506C ,4 }, + [GCC_Q6_AHB_ARES ] = {0x2506C ,3 }, + [GCC_Q6_AHB_S_ARES ] = {0x2506C ,2 }, + [GCC_Q6_AXIM2_ARES ] = {0x2506C ,1 }, + [GCC_Q6_AXIM_ARES ] = {0x2506C ,0 }, + [GCC_QDSS_BCR ] = {0x2d000 ,0 }, + [GCC_QPIC_BCR ] = {0x32000 ,0 }, + [GCC_QPIC_AHB_ARES ] = {0x3201c ,1 }, + [GCC_QPIC_ARES ] = {0x3201c ,0 }, + [GCC_QUSB2_0_PHY_BCR ] = {0x2c068 ,0 }, + [GCC_RBCPR_BCR ] = {0x39000 ,0 }, + [GCC_RBCPR_MX_BCR ] = {0x39014 ,0 }, + [GCC_SDCC_BCR ] = {0x33000 ,0 }, + [GCC_SEC_CTRL_BCR ] = {0x1a000 ,0 }, + [GCC_SMMU_CFG_BCR ] = {0x1202c ,0 }, + [GCC_SNOC_BCR ] = {0x2E000 ,0 }, + [GCC_SPDM_BCR ] = {0x36000 ,0 }, + [GCC_TCSR_BCR ] = {0x3d000 ,0 }, + [GCC_TLMM_BCR ] = {0x3e000 ,0 }, + [GCC_TME_BCR ] = {0x10000 ,0 }, + [GCC_UNIPHY0_BCR ] = {0x17044 ,0 }, + [GCC_UNIPHY0_SYS_RESET ] = {0x17050 ,0 }, + [GCC_UNIPHY0_AHB_RESET ] = {0x17050 ,1 }, + [GCC_UNIPHY0_XPCS_RESET ] = {0x17050 ,2 }, + [GCC_UNIPHY1_SYS_RESET ] = {0x17060 ,0 }, + [GCC_UNIPHY1_AHB_RESET ] = {0x17060 ,1 }, + [GCC_UNIPHY1_XPCS_RESET ] = {0x17060 ,2 }, + [GCC_UNIPHY2_SYS_RESET ] = {0x17070 ,0 }, + [GCC_UNIPHY2_AHB_RESET ] = {0x17070 ,1 }, + [GCC_UNIPHY2_XPCS_RESET ] = {0x17070 ,2 }, + [GCC_UNIPHY1_BCR ] = {0x17054 ,0 }, + [GCC_UNIPHY2_BCR ] = {0x17064 ,0 }, + [GCC_USB0_PHY_BCR ] = {0x2c06c ,0 }, + [GCC_USB3PHY_0_PHY_BCR ] = {0x2c070 ,0 }, + [GCC_USB_BCR ] = {0x2c000 ,0 }, + [GCC_USB_MISC_RESET ] = {0x2c064 ,0 }, + [GCC_WCSSAON_RESET ] = {0x25074 ,0 }, + [GCC_WCSS_ACMT_ARES ] = {0x25070 ,5 }, + [GCC_WCSS_AHB_S_ARES ] = {0x25070 ,4 }, + [GCC_WCSS_AXI_M_ARES ] = {0x25070 ,3 }, + [GCC_WCSS_BCR ] = {0x18004 ,0 }, + [GCC_WCSS_DBG_ARES ] = {0x25070 ,2 }, + [GCC_WCSS_DBG_BDG_ARES ] = {0x25070 ,1 }, + [GCC_WCSS_ECAHB_ARES ] = {0x25070 ,0 }, + [GCC_WCSS_Q6_BCR ] = {0x18000 ,0 }, + [GCC_WCSS_Q6_TBU_BCR ] = {0x12054 ,0 }, +}; + +static const struct of_device_id gcc_ipq9574_match_table[] = { + { .compatible ="qcom,gcc-ipq9574" }, + { } +}; +MODULE_DEVICE_TABLE (of, gcc_ipq9574_match_table); + +static const struct regmap_config gcc_ipq9574_regmap_config = { + .reg_bits =32 , + .reg_stride =4 , + .val_bits =32 , + .max_register =0x7fffc , + .fast_io = true, +}; + +static const struct qcom_cc_desc gcc_ipq9574_desc = { + .config = &gcc_ipq9574_regmap_config, + .clks = gcc_ipq9574_clks, + .num_clks =ARRAY_SIZE (gcc_ipq9574_clks), + .resets = gcc_ipq9574_resets, + .num_resets =ARRAY_SIZE (gcc_ipq9574_resets), + .clk_hws = gcc_ipq9574_hws, + .num_clk_hws =ARRAY_SIZE (gcc_ipq9574_hws), +}; + +static const struct qcom_cc_desc gcc_ipq9574_dummy_desc = { + .config = &gcc_ipq9574_regmap_config, + .clks = gcc_ipq9574_dummy_clks, + .num_clks =ARRAY_SIZE (gcc_ipq9574_dummy_clks), + .resets = gcc_ipq9574_resets, + .num_resets =ARRAY_SIZE (gcc_ipq9574_resets), +}; + +static int gcc_ipq9574_probe (struct platform_device *pdev) +{ +struct regmap *regmap; +struct qcom_cc_desc ipq9574_desc = gcc_ipq9574_desc; +struct device_node *np = (&pdev->dev)->of_node; + +if (of_property_read_bool (np,"gcc-use-dummy" ))drivers/clk/qcom/gcc-ipq9574.c line 4679
Quoted 10 lines
drivers/clk/qcom/gcc-ipq9574.c new file +10
-0+ ipq9574_desc = gcc_ipq9574_dummy_desc; + + regmap =qcom_cc_map (pdev, &ipq9574_desc); +if (IS_ERR (regmap)) +return PTR_ERR (regmap); + +return qcom_cc_really_probe (pdev, &ipq9574_desc, regmap); +} + +static int gcc_ipq9574_remove (struct platform_device *pdev)Generally you shouldn't remove the driver that ensures your platform well, works..
Quoted 2 lines
Plus GCCs are always =y in mainline to make sure dependencies are met so there's no removing.
Okay, understood!
Quoted 20 lines
Quoted 20 lines
drivers/clk/qcom/gcc-ipq9574.c new file +19
-0+{ +return 0 ; +} + +static struct platform_driver gcc_ipq9574_driver = { + .probe = gcc_ipq9574_probe, + .remove = gcc_ipq9574_remove, + .driver = { + .name ="qcom,gcc-ipq9574" , + .of_match_table = gcc_ipq9574_match_table, + }, +}; + +static int __init gcc_ipq9574_init (void ) +{ +return platform_driver_register (&gcc_ipq9574_driver); +} +core_initcall (gcc_ipq9574_init); +
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c line 4706
Quoted 8 lines
drivers/clk/qcom/gcc-ipq9574.c new file +8
-0+static void __exit gcc_ipq9574_exit(void) +{ +platform_driver_unregister (&gcc_ipq9574_driver); +} +module_exit (gcc_ipq9574_exit); + +MODULE_DESCRIPTION ("Qualcomm Technologies, Inc. GCC IPQ9574 Driver" ); +MODULE_LICENSE ("GPL" );
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 2/7] clk: qcom: Add Global Clock Controller driver for IPQ9574
Quoted 12 lines · Devi Priya
Quoted 9 lines · Konrad Dybcio
Quoted 6 lines · devi priya
Add Global Clock Controller (GCC) driver for ipq9574 based devices
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Signed-off-by devi priya <[email protected]>---
[...]
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
+static struct
clk_branchgcc_blsp1_qup6_i2c_apps_clk= { + .halt_reg =0x07024,
+ .clkr = {
+ .enable_reg =0x07024,
+ .enable_mask = BIT(0),
+ .hw.init = &(structclk_init_data) {
+ .name = "gcc_blsp1_qup6_i2c_apps_clk", + .parent_hws = (const structclk_hw*[]) { + &blsp1_qup6_i2c_apps_clk_src.clkr.hw }, + .num_parents = 1,
+ .flags =CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED,
Quoted 2 lines
Quoted 1 line
Sounds very much like a hack..
Got it, will remove the clock entry as it is not being used in linux
I'm not sure removing it is the best option, somebody might have a funky board where they use this particular QUP for I2C for whatever reason and then the clock would have to be re-added..
Thanks for addressing all of the review comments so thoroughly!
Konrad
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 2/7] clk: qcom: Add Global Clock Controller driver for IPQ9574
Quoted 28 lines · Konrad Dybcio
Quoted 12 lines · Devi Priya
Quoted 9 lines · Konrad Dybcio
Quoted 6 lines · devi priya
Add Global Clock Controller (GCC) driver for ipq9574 based devices
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Signed-off-by devi priya <[email protected]>---
[...]
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
+static struct
clk_branchgcc_blsp1_qup6_i2c_apps_clk= { + .halt_reg =0x07024,
+ .clkr = {
+ .enable_reg =0x07024,
+ .enable_mask = BIT(0),
+ .hw.init = &(structclk_init_data) {
+ .name = "gcc_blsp1_qup6_i2c_apps_clk", + .parent_hws = (const structclk_hw*[]) { + &blsp1_qup6_i2c_apps_clk_src.clkr.hw }, + .num_parents = 1,
+ .flags =CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED,
Quoted 5 lines
Quoted 2 lines
Quoted 1 line
Sounds very much like a hack..
Got it, will remove the clock entry as it is not being used in linux
I'm not sure removing it is the best option, somebody might have a funky board where they use this particular QUP for I2C for whatever reason and then the clock would have to be re-added..
Sure, Understood
This clock is used by the RPM component to communicate with PMIC and we would add the critical flag here
Quoted 3 lines
Thanks for addressing all of the review comments so thoroughly!
Konrad
Best Regards,
Devi Priya
Re: [PATCH 2/7] clk: qcom: Add Global Clock Controller driver for IPQ9574
Quoted 31 lines · Devi Priya
Quoted 28 lines · Konrad Dybcio
Quoted 12 lines · Devi Priya
Quoted 9 lines · Konrad Dybcio
Quoted 6 lines · devi priya
Add Global Clock Controller (GCC) driver for ipq9574 based devices
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Signed-off-by devi priya <[email protected]>---
[...]
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
+static struct
clk_branchgcc_blsp1_qup6_i2c_apps_clk= { + .halt_reg =0x07024,
+ .clkr = {
+ .enable_reg =0x07024,
+ .enable_mask = BIT(0),
+ .hw.init = &(structclk_init_data) {
+ .name = "gcc_blsp1_qup6_i2c_apps_clk", + .parent_hws = (const structclk_hw*[]) { + &blsp1_qup6_i2c_apps_clk_src.clkr.hw }, + .num_parents = 1,
+ .flags =CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED,
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
Quoted 1 line
Sounds very much like a hack..
Got it, will remove the clock entry as it is not being used in linux
I'm not sure removing it is the best option, somebody might have a funky board where they use this particular QUP for I2C for whatever reason and then the clock would have to be re-added..
Sure, Understood
This clock is used by the RPM component to communicate with PMIC and we would add the critical flag here
Okay, so this SoC is intended to ship with some RPM PMICs and *always* with an I2C companion that's required for some basic functionality, correct?
Otherwise, if it's just for wifi/multimedia/etc (like PM8008ij on some newer devices), you should not make it critical and simply rely on Linux keeping it alive like so:
consumer takes a regulator
the regulator does not go to sleep because it's consumed the PMIC is active because a regulator on it is being used the I2C bus is active because its child PMIC is used the I2C clocks are alive because there's an active user
Konrad
Quoted 7 lines
Quoted 4 lines
Thanks for addressing all of the review comments so thoroughly!
Konrad
Best Regards,
Devi Priya
Re: [PATCH 2/7] clk: qcom: Add Global Clock Controller driver for IPQ9574
Quoted 50 lines · Konrad Dybcio
Quoted 31 lines · Devi Priya
Quoted 28 lines · Konrad Dybcio
Quoted 12 lines · Devi Priya
Quoted 9 lines · Konrad Dybcio
Quoted 6 lines · devi priya
Add Global Clock Controller (GCC) driver for ipq9574 based devices
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Signed-off-by devi priya <[email protected]>---
[...]
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
+static struct
clk_branchgcc_blsp1_qup6_i2c_apps_clk= { + .halt_reg =0x07024,
+ .clkr = {
+ .enable_reg =0x07024,
+ .enable_mask = BIT(0),
+ .hw.init = &(structclk_init_data) {
+ .name = "gcc_blsp1_qup6_i2c_apps_clk", + .parent_hws = (const structclk_hw*[]) { + &blsp1_qup6_i2c_apps_clk_src.clkr.hw }, + .num_parents = 1,
+ .flags =CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED,Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
Quoted 1 line
Sounds very much like a hack..
Got it, will remove the clock entry as it is not being used in linux
I'm not sure removing it is the best option, somebody might have a funky board where they use this particular QUP for I2C for whatever reason and then the clock would have to be re-added..
Sure, Understood
This clock is used by the RPM component to communicate with PMIC and we would add the critical flag hereOkay, so this SoC is intended to ship with some RPM PMICs and *always* with an I2C companion that's required for some basic functionality, correct?
Otherwise, if it's just for wifi/multimedia/etc (like PM8008ij on some newer devices), you should not make it critical and simply rely on Linux keeping it alive like so:
Quoted 6 lines
consumer takes a regulator
the regulator does not go to sleep because it's consumed the PMIC is active because a regulator on it is being used the I2C bus is active because its child PMIC is used the I2C clocks are alive because there's an active user
Yes correct, the SoC would always have an I2C companion
Quoted 8 lines
Konrad
Quoted 7 lines
Quoted 4 lines
Thanks for addressing all of the review comments so thoroughly!
Konrad
Best Regards,
Devi Priya
PATCH 3/7 dt-bindings: pinctrl: qcom: Add ipq9574 pinctrl bindings
In reply to devi priyaAdd device tree binding documentation details for ipq9574 pinctrl driver
--- .../bindings/pinctrl/qcom,ipq9574-tlmm.yaml | 129 ++++++++++++++++++ 1 file changed, 129 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +129 -0
@@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq9574-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. IPQ9574 TLMM block + +maintainers: + - Anusha <[email protected]> + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + IPQ9574 platform. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,ipq9574-tlmm + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + gpio-reserved-ranges: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-ipq9574-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-ipq9574-tlmm-state" + additionalProperties: false + +$defs: + qcom-ipq9574-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-5][0-9]|6[0-4])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, + sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, + qdsd_data3 ] + minItems: 1 + maxItems: 8 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3, + audio_pdm1, audio_pri, audio_sec, blsp0_spi, blsp0_uart, + blsp1_i2c, blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, + blsp2_uart, blsp3_i2c, blsp3_spi, blsp3_uart, blsp4_i2c, + blsp4_spi, blsp4_uart, blsp5_i2c, blsp5_uart, cri_trng0, + cri_trng1, cri_trng3, cxc0, cxc1, dbg_out, dwc_ddrphy, + gcc_plltest, gcc_tlmm, mac00, mac01, mac10, mac11, mdc, + mdio, pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, pcie2_clk, + pcie2_wake, pcie3_clk, pcie3_wake, prng_rosc0, prng_rosc1, + prng_rosc2, prng_rosc3, pta1_0, pta1_1, pta1_2, pta20, pta21, + pwm00, pwm01, pwm02, pwm03, pwm04, pwm10, pwm11, pwm12, pwm13, + pwm14, pwm20, pwm21, pwm22, pwm23, pwm24, pwm30, pwm31, pwm32, + pwm33, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, + qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, + qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a, + qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a, + dss_tracedata_b, qdss_tracedata_b, qspi_clk, qspi_cs, qspi_data, + rx0, rx1, sdc_clk, sdc_cmd, sdc_data, sdc_rclk, tsens_max, + wci20, wci21, wsa_swrm, audio_pdm0 ] + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq9574-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 65>; + + uart2-state { + pins = "gpio34", "gpio35"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-pull-down; + }; + };
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 3/7] dt-bindings: pinctrl: qcom: Add ipq9574 pinctrl bindings
Quoted 3 lines · devi priya
Add device tree binding documentation details for ipq9574 pinctrl driver
Subject: drop second/last, redundant "bindings". The "dt-bindings" prefix is already stating that these are bindings.
Quoted 18 lines
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Signed-off-by devi priya <[email protected]>--- .../bindings/pinctrl/qcom,ipq9574-tlmm.yaml | 129 ++++++++++++++++++ 1 file changed, 129 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yamlDocumentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +4
-0@@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq9574-tlmm.yaml#
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml line 14
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +10
-0+$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. IPQ9574 TLMM block + +maintainers: + - Anusha <[email protected]> + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + IPQ9574 platform.
No, please rebase on recent changes. You started your work on some old bindings so your binding likely includes all issues we fixed.
Quoted 9 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +9
-0+ +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,ipq9574-tlmm + + reg:
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml line 33
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +10
-0+ maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + gpio-reserved-ranges: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true
Missing gpio-line-names and constraints for ranges. Look at other bindings.
Quoted 25 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +25
-0+ +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-ipq9574-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-ipq9574-tlmm-state" + additionalProperties: false + +$defs: + qcom-ipq9574-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties:
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml line 68
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +10
-0+ pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-5][0-9]|6[0-4])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, + sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, + qdsd_data3 ]
These are ordered by name.
Quoted 17 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +17
-0+ minItems: 1 + maxItems: 8 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3, + audio_pdm1, audio_pri, audio_sec, blsp0_spi, blsp0_uart, + blsp1_i2c, blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, + blsp2_uart, blsp3_i2c, blsp3_spi, blsp3_uart, blsp4_i2c, + blsp4_spi, blsp4_uart, blsp5_i2c, blsp5_uart, cri_trng0, + cri_trng1, cri_trng3, cxc0, cxc1, dbg_out, dwc_ddrphy, + gcc_plltest, gcc_tlmm, mac00, mac01, mac10, mac11, mdc, + mdio, pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, pcie2_clk, + pcie2_wake, pcie3_clk, pcie3_wake, prng_rosc0, prng_rosc1,
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml line 95
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +10
-0+ prng_rosc2, prng_rosc3, pta1_0, pta1_1, pta1_2, pta20, pta21, + pwm00, pwm01, pwm02, pwm03, pwm04, pwm10, pwm11, pwm12, pwm13, + pwm14, pwm20, pwm21, pwm22, pwm23, pwm24, pwm30, pwm31, pwm32, + pwm33, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, + qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, + qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a, + qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a, + dss_tracedata_b, qdss_tracedata_b, qspi_clk, qspi_cs, qspi_data, + rx0, rx1, sdc_clk, sdc_cmd, sdc_data, sdc_rclk, tsens_max, + wci20, wci21, wsa_swrm, audio_pdm0 ]
These too
Quoted 19 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +19
-0+ + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq9574-tlmm";
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml line 124
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +10
-0+ reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 65>; + + uart2-state { + pins = "gpio34", "gpio35";
Wrong indentation.
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml line 129
Quoted 5 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +5
-0+ function = "blsp2_uart"; + drive-strength = <8>; + bias-pull-down; + }; + };
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 3/7] dt-bindings: pinctrl: qcom: Add ipq9574 pinctrl bindings
Quoted 7 lines · Krzysztof Kozlowski
Quoted 3 lines · devi priya
Add device tree binding documentation details for ipq9574 pinctrl driver
Subject: drop second/last, redundant "bindings". The "dt-bindings" prefix is already stating that these are bindings.
Sure, okay
Quoted 24 lines
Quoted 24 lines
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Signed-off-by devi priya <[email protected]>--- .../bindings/pinctrl/qcom,ipq9574-tlmm.yaml | 129 ++++++++++++++++++ 1 file changed, 129 insertions(+)create mode 100644
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yamlDocumentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +9
-0@@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq9574-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. IPQ9574 TLMM block + +maintainers:
Quoted 8 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml line 14
Quoted 5 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +5
-0+ - Anusha <[email protected]> + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + IPQ9574 platform.No, please rebase on recent changes. You started your work on some old bindings so your binding likely includes all issues we fixed.
Sure, will do
Quoted 14 lines
Quoted 14 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +13
-0+ +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,ipq9574-tlmm + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true
Quoted 8 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml line 33
Quoted 6 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +6
-0+ "#interrupt-cells": true + gpio-controller: true + gpio-reserved-ranges: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: trueMissing gpio-line-names and constraints for ranges. Look at other bindings.
Okay
Quoted 30 lines
Quoted 30 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +29
-0+ +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-ipq9574-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-ipq9574-tlmm-state" + additionalProperties: false + +$defs: + qcom-ipq9574-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode.
Quoted 8 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml line 68
Quoted 6 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +6
-0+ items: + oneOf: + - pattern: "^gpio([0-9]|[1-5][0-9]|6[0-4])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, + sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, + qdsd_data3 ]These are ordered by name.
The enum values seem to be ordered alphabetically. could you please help us understand the ordering?
Quoted 54 lines
Quoted 18 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +17
-0+ minItems: 1 + maxItems: 8 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3, + audio_pdm1, audio_pri, audio_sec, blsp0_spi, blsp0_uart, + blsp1_i2c, blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, + blsp2_uart, blsp3_i2c, blsp3_spi, blsp3_uart, blsp4_i2c, + blsp4_spi, blsp4_uart, blsp5_i2c, blsp5_uart, cri_trng0, + cri_trng1, cri_trng3, cxc0, cxc1, dbg_out, dwc_ddrphy, + gcc_plltest, gcc_tlmm, mac00, mac01, mac10, mac11, mdc, + mdio, pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, pcie2_clk, + pcie2_wake, pcie3_clk, pcie3_wake, prng_rosc0, prng_rosc1,Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml line 95
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +10
-0+ prng_rosc2, prng_rosc3, pta1_0, pta1_1, pta1_2, pta20, pta21, + pwm00, pwm01, pwm02, pwm03, pwm04, pwm10, pwm11, pwm12, pwm13, + pwm14, pwm20, pwm21, pwm22, pwm23, pwm24, pwm30, pwm31, pwm32, + pwm33, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, + qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, + qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a, + qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a, + dss_tracedata_b, qdss_tracedata_b, qspi_clk, qspi_cs, qspi_data, + rx0, rx1, sdc_clk, sdc_cmd, sdc_data, sdc_rclk, tsens_max, + wci20, wci21, wsa_swrm, audio_pdm0 ]These too
Quoted 23 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +23
-0+ + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq9574-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>;
Quoted 8 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml line 124
Quoted 6 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +6
-0+ interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 65>; + + uart2-state { + pins = "gpio34", "gpio35";Wrong indentation.
Okay
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml line 129
Quoted 6 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +5
-0+ function = "blsp2_uart"; + drive-strength = <8>; + bias-pull-down; + }; + };Best regards,
Krzysztof
Best Regards,
Devi Priya
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 3/7] dt-bindings: pinctrl: qcom: Add ipq9574 pinctrl bindings
Quoted 12 lines · Devi Priya
Quoted 12 lines
Quoted 11 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +11
-0+ properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-5][0-9]|6[0-4])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, + sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, + qdsd_data3 ]
Quoted 3 lines
Quoted 1 line
These are ordered by name.
The enum values seem to be ordered alphabetically. could you please help us understand the ordering?
q goes before s
Quoted 4 lines
Quoted 4 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml line 71
Quoted 4 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +3
-0+ minItems: 1 + maxItems: 8 +
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 3/7] dt-bindings: pinctrl: qcom: Add ipq9574 pinctrl bindings
Quoted 13 lines · Krzysztof Kozlowski
Quoted 12 lines · Devi Priya
Quoted 12 lines
Quoted 11 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +11
-0+ properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-5][0-9]|6[0-4])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, + sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, + qdsd_data3 ]
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
These are ordered by name.
The enum values seem to be ordered alphabetically. could you please help us understand the ordering?
q goes before s
Oops! sorry. Will update
Quoted 9 lines
Quoted 5 lines
Quoted 5 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml line 71
Quoted 5 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml new file +3
-0+ minItems: 1 + maxItems: 8 +Best regards,
Krzysztof
Best Regards,
Devi Priya
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 4/7 pinctrl: qcom: Add IPQ9574 pinctrl driver
In reply to devi priyaAdd pinctrl definitions for the TLMM of IPQ9574
--- drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-ipq9574.c | 1003 ++++++++++++++++++++++++ 3 files changed, 1014 insertions(+) create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq9574.c
drivers/pinctrl/qcom/Kconfig +10 -0
@@ -70,6 +70,16 @@ config PINCTRL_IPQ6018 Qualcomm Technologies Inc. IPQ6018 platform. Select this for IPQ6018. +config PINCTRL_IPQ9574 + tristate "Qualcomm Technologies, Inc. IPQ9574 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for + the Qualcomm Technologies Inc. TLMM block found on the + Qualcomm Technologies Inc. IPQ9574 platform. Select this for + IPQ9574. + config PINCTRL_MSM8226 tristate "Qualcomm 8226 pin controller driver" depends on OF
drivers/pinctrl/qcom/Makefile +1 -0
@@ -7,6 +7,7 @@ obj-$(CONFIG_PINCTRL_IPQ4019) += pinctrl-ipq4019.o obj-$(CONFIG_PINCTRL_IPQ8064) += pinctrl-ipq8064.o obj-$(CONFIG_PINCTRL_IPQ8074) += pinctrl-ipq8074.o obj-$(CONFIG_PINCTRL_IPQ6018) += pinctrl-ipq6018.o +obj-$(CONFIG_PINCTRL_IPQ9574) += pinctrl-ipq9574.o obj-$(CONFIG_PINCTRL_MSM8226) += pinctrl-msm8226.o obj-$(CONFIG_PINCTRL_MSM8660) += pinctrl-msm8660.o obj-$(CONFIG_PINCTRL_MSM8960) += pinctrl-msm8960.o
drivers/pinctrl/qcom/pinctrl-ipq9574.c new file +1003 -0
1,003 lines not on this page · raw message
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 4/7] pinctrl: qcom: Add IPQ9574 pinctrl driver
Quoted 17 lines · devi priya
Add pinctrl definitions for the TLMM of IPQ9574
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Signed-off-by devi priya <[email protected]>--- drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-ipq9574.c | 1003 ++++++++++++++++++++++++ 3 files changed, 1014 insertions(+) create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq9574.cdrivers/pinctrl/qcom/Kconfig +0
-0
drivers/pinctrl/qcom/Kconfig config PINCTRL_IPQ6018 · line 75
Quoted 6 lines
drivers/pinctrl/qcom/Kconfig +3
-0@@ -70,6 +70,16 @@ config PINCTRL_IPQ6018 Qualcomm Technologies Inc. IPQ6018 platform. Select this for IPQ6018. +config PINCTRL_IPQ9574 + tristate "Qualcomm Technologies, Inc. IPQ9574 pin controller driver" + depends on GPIOLIB && OF
Look at other entries and use similar style.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 4/7] pinctrl: qcom: Add IPQ9574 pinctrl driver
Quoted 21 lines · Krzysztof Kozlowski
Quoted 20 lines · devi priya
Add pinctrl definitions for the TLMM of IPQ9574
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Signed-off-by devi priya <[email protected]>--- drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-ipq9574.c | 1003 ++++++++++++++++++++++++ 3 files changed, 1014 insertions(+)create mode 100644
drivers/pinctrl/qcom/pinctrl-ipq9574.cdrivers/pinctrl/qcom/Kconfig +0
-0@@ -70,6 +70,16 @@ config PINCTRL_IPQ6018 Qualcomm Technologies Inc. IPQ6018 platform. Select this for IPQ6018.
Quoted 5 lines
drivers/pinctrl/qcom/Kconfig config PINCTRL_IPQ6018 · line 75
Quoted 3 lines
drivers/pinctrl/qcom/Kconfig +3
-0+config PINCTRL_IPQ9574 + tristate "Qualcomm Technologies, Inc. IPQ9574 pin controller driver" + depends on GPIOLIB && OFLook at other entries and use similar style.
Sure, will do!
Quoted 4 lines
Best regards,
Krzysztof
Best Regards,
Devi Priya
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 4/7] pinctrl: qcom: Add IPQ9574 pinctrl driver
In reply to devi priyaQuoted 1,023 lines · devi priya
Add pinctrl definitions for the TLMM of IPQ9574
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Signed-off-by devi priya <[email protected]>--- drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-ipq9574.c | 1003 ++++++++++++++++++++++++ 3 files changed, 1014 insertions(+)create mode 100644
drivers/pinctrl/qcom/pinctrl-ipq9574.cdrivers/pinctrl/qcom/Kconfig +10
-0@@ -70,6 +70,16 @@ config PINCTRL_IPQ6018 Qualcomm Technologies Inc. IPQ6018 platform. Select this for IPQ6018. +config PINCTRL_IPQ9574 + tristate "Qualcomm Technologies, Inc. IPQ9574 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for + the Qualcomm Technologies Inc. TLMM block found on the + Qualcomm Technologies Inc. IPQ9574 platform. Select this for + IPQ9574. + config PINCTRL_MSM8226 tristate "Qualcomm 8226 pin controller driver" depends on OFdrivers/pinctrl/qcom/Makefile +1
-0@@ -7,6 +7,7 @@ obj-$(CONFIG_PINCTRL_IPQ4019) += pinctrl-ipq4019.o obj-$(CONFIG_PINCTRL_IPQ8064) += pinctrl-ipq8064.o obj-$(CONFIG_PINCTRL_IPQ8074) += pinctrl-ipq8074.o obj-$(CONFIG_PINCTRL_IPQ6018) += pinctrl-ipq6018.o +obj-$(CONFIG_PINCTRL_IPQ9574) += pinctrl-ipq9574.o obj-$(CONFIG_PINCTRL_MSM8226) += pinctrl-msm8226.o obj-$(CONFIG_PINCTRL_MSM8660) += pinctrl-msm8660.o obj-$(CONFIG_PINCTRL_MSM8960) += pinctrl-msm8960.odrivers/pinctrl/qcom/pinctrl-ipq9574.c new file +972
-0@@ -0,0 +1,1003 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* +* Copyright (c) 2022 The Linux Foundation. All rights reserved. +*/ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-msm.h" + +#define FUNCTION (fname) \ + [msm_mux_##fname] = { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + +#define REG_SIZE 0x1000 +#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9) \ + { \ + .name = "gpio" #id, \ + .pins = gpio##id##_pins, \ + .npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins), \ + .funcs = (int[]){ \ + msm_mux_gpio, /* gpio mode */ \ + msm_mux_##f1, \ + msm_mux_##f2, \ + msm_mux_##f3, \ + msm_mux_##f4, \ + msm_mux_##f5, \ + msm_mux_##f6, \ + msm_mux_##f7, \ + msm_mux_##f8, \ + msm_mux_##f9 \ + }, \ + .nfuncs = 10, \ + .ctl_reg = REG_SIZE * id, \ + .io_reg = 0x4 + REG_SIZE * id, \ + .intr_cfg_reg = 0x8 + REG_SIZE * id, \ + .intr_status_reg = 0xc + REG_SIZE * id, \ + .intr_target_reg = 0x8 + REG_SIZE * id, \ + .mux_bit = 2, \ + .pull_bit = 0, \ + .drv_bit = 6, \ + .oe_bit = 9, \ + .in_bit = 0, \ + .out_bit = 1, \ + .intr_enable_bit = 0, \ + .intr_status_bit = 0, \ + .intr_target_bit = 5, \ + .intr_target_kpss_val = 3, \ + .intr_raw_status_bit = 4, \ + .intr_polarity_bit = 1, \ + .intr_detection_bit = 2, \ + .intr_detection_width = 2, \ + } + +static const struct pinctrl_pin_desc ipq9574_pins[] = { +PINCTRL_PIN (0 ,"GPIO_0" ), +PINCTRL_PIN (1 ,"GPIO_1" ), +PINCTRL_PIN (2 ,"GPIO_2" ), +PINCTRL_PIN (3 ,"GPIO_3" ), +PINCTRL_PIN (4 ,"GPIO_4" ), +PINCTRL_PIN (5 ,"GPIO_5" ), +PINCTRL_PIN (6 ,"GPIO_6" ), +PINCTRL_PIN (7 ,"GPIO_7" ), +PINCTRL_PIN (8 ,"GPIO_8" ), +PINCTRL_PIN (9 ,"GPIO_9" ), +PINCTRL_PIN (10 ,"GPIO_10" ), +PINCTRL_PIN (11 ,"GPIO_11" ), +PINCTRL_PIN (12 ,"GPIO_12" ), +PINCTRL_PIN (13 ,"GPIO_13" ), +PINCTRL_PIN (14 ,"GPIO_14" ), +PINCTRL_PIN (15 ,"GPIO_15" ), +PINCTRL_PIN (16 ,"GPIO_16" ), +PINCTRL_PIN (17 ,"GPIO_17" ), +PINCTRL_PIN (18 ,"GPIO_18" ), +PINCTRL_PIN (19 ,"GPIO_19" ), +PINCTRL_PIN (20 ,"GPIO_20" ), +PINCTRL_PIN (21 ,"GPIO_21" ), +PINCTRL_PIN (22 ,"GPIO_22" ), +PINCTRL_PIN (23 ,"GPIO_23" ), +PINCTRL_PIN (24 ,"GPIO_24" ), +PINCTRL_PIN (25 ,"GPIO_25" ), +PINCTRL_PIN (26 ,"GPIO_26" ), +PINCTRL_PIN (27 ,"GPIO_27" ), +PINCTRL_PIN (28 ,"GPIO_28" ), +PINCTRL_PIN (29 ,"GPIO_29" ), +PINCTRL_PIN (30 ,"GPIO_30" ), +PINCTRL_PIN (31 ,"GPIO_31" ), +PINCTRL_PIN (32 ,"GPIO_32" ), +PINCTRL_PIN (33 ,"GPIO_33" ), +PINCTRL_PIN (34 ,"GPIO_34" ), +PINCTRL_PIN (35 ,"GPIO_35" ), +PINCTRL_PIN (36 ,"GPIO_36" ), +PINCTRL_PIN (37 ,"GPIO_37" ), +PINCTRL_PIN (38 ,"GPIO_38" ), +PINCTRL_PIN (39 ,"GPIO_39" ), +PINCTRL_PIN (40 ,"GPIO_40" ), +PINCTRL_PIN (41 ,"GPIO_41" ), +PINCTRL_PIN (42 ,"GPIO_42" ), +PINCTRL_PIN (43 ,"GPIO_43" ), +PINCTRL_PIN (44 ,"GPIO_44" ), +PINCTRL_PIN (45 ,"GPIO_45" ), +PINCTRL_PIN (46 ,"GPIO_46" ), +PINCTRL_PIN (47 ,"GPIO_47" ), +PINCTRL_PIN (48 ,"GPIO_48" ), +PINCTRL_PIN (49 ,"GPIO_49" ), +PINCTRL_PIN (50 ,"GPIO_50" ), +PINCTRL_PIN (51 ,"GPIO_51" ), +PINCTRL_PIN (52 ,"GPIO_52" ), +PINCTRL_PIN (53 ,"GPIO_53" ), +PINCTRL_PIN (54 ,"GPIO_54" ), +PINCTRL_PIN (55 ,"GPIO_55" ), +PINCTRL_PIN (56 ,"GPIO_56" ), +PINCTRL_PIN (57 ,"GPIO_57" ), +PINCTRL_PIN (58 ,"GPIO_58" ), +PINCTRL_PIN (59 ,"GPIO_59" ), +PINCTRL_PIN (60 ,"GPIO_60" ), +PINCTRL_PIN (61 ,"GPIO_61" ), +PINCTRL_PIN (62 ,"GPIO_62" ), +PINCTRL_PIN (63 ,"GPIO_63" ), +PINCTRL_PIN (64 ,"GPIO_64" ), +}; + +#define DECLARE_MSM_GPIO_PINS (pin) \ + static const unsigned int gpio##pin##_pins[] = { pin } +DECLARE_MSM_GPIO_PINS (0 ); +DECLARE_MSM_GPIO_PINS (1 ); +DECLARE_MSM_GPIO_PINS (2 ); +DECLARE_MSM_GPIO_PINS (3 ); +DECLARE_MSM_GPIO_PINS (4 ); +DECLARE_MSM_GPIO_PINS (5 ); +DECLARE_MSM_GPIO_PINS (6 ); +DECLARE_MSM_GPIO_PINS (7 ); +DECLARE_MSM_GPIO_PINS (8 ); +DECLARE_MSM_GPIO_PINS (9 ); +DECLARE_MSM_GPIO_PINS (10 ); +DECLARE_MSM_GPIO_PINS (11 ); +DECLARE_MSM_GPIO_PINS (12 ); +DECLARE_MSM_GPIO_PINS (13 ); +DECLARE_MSM_GPIO_PINS (14 ); +DECLARE_MSM_GPIO_PINS (15 ); +DECLARE_MSM_GPIO_PINS (16 ); +DECLARE_MSM_GPIO_PINS (17 ); +DECLARE_MSM_GPIO_PINS (18 ); +DECLARE_MSM_GPIO_PINS (19 ); +DECLARE_MSM_GPIO_PINS (20 ); +DECLARE_MSM_GPIO_PINS (21 ); +DECLARE_MSM_GPIO_PINS (22 ); +DECLARE_MSM_GPIO_PINS (23 ); +DECLARE_MSM_GPIO_PINS (24 ); +DECLARE_MSM_GPIO_PINS (25 ); +DECLARE_MSM_GPIO_PINS (26 ); +DECLARE_MSM_GPIO_PINS (27 ); +DECLARE_MSM_GPIO_PINS (28 ); +DECLARE_MSM_GPIO_PINS (29 ); +DECLARE_MSM_GPIO_PINS (30 ); +DECLARE_MSM_GPIO_PINS (31 ); +DECLARE_MSM_GPIO_PINS (32 ); +DECLARE_MSM_GPIO_PINS (33 ); +DECLARE_MSM_GPIO_PINS (34 ); +DECLARE_MSM_GPIO_PINS (35 ); +DECLARE_MSM_GPIO_PINS (36 ); +DECLARE_MSM_GPIO_PINS (37 ); +DECLARE_MSM_GPIO_PINS (38 ); +DECLARE_MSM_GPIO_PINS (39 ); +DECLARE_MSM_GPIO_PINS (40 ); +DECLARE_MSM_GPIO_PINS (41 ); +DECLARE_MSM_GPIO_PINS (42 ); +DECLARE_MSM_GPIO_PINS (43 ); +DECLARE_MSM_GPIO_PINS (44 ); +DECLARE_MSM_GPIO_PINS (45 ); +DECLARE_MSM_GPIO_PINS (46 ); +DECLARE_MSM_GPIO_PINS (47 ); +DECLARE_MSM_GPIO_PINS (48 ); +DECLARE_MSM_GPIO_PINS (49 ); +DECLARE_MSM_GPIO_PINS (50 ); +DECLARE_MSM_GPIO_PINS (51 ); +DECLARE_MSM_GPIO_PINS (52 ); +DECLARE_MSM_GPIO_PINS (53 ); +DECLARE_MSM_GPIO_PINS (54 ); +DECLARE_MSM_GPIO_PINS (55 ); +DECLARE_MSM_GPIO_PINS (56 ); +DECLARE_MSM_GPIO_PINS (57 ); +DECLARE_MSM_GPIO_PINS (58 ); +DECLARE_MSM_GPIO_PINS (59 ); +DECLARE_MSM_GPIO_PINS (60 ); +DECLARE_MSM_GPIO_PINS (61 ); +DECLARE_MSM_GPIO_PINS (62 ); +DECLARE_MSM_GPIO_PINS (63 ); +DECLARE_MSM_GPIO_PINS (64 ); + +enum ipq9574_functions { + msm_mux_atest_char, + msm_mux_atest_char0, + msm_mux_atest_char1, + msm_mux_atest_char2, + msm_mux_atest_char3, + msm_mux_audio_pdm0, + msm_mux_audio_pdm1, + msm_mux_audio_pri, + msm_mux_audio_sec, + msm_mux_blsp0_spi, + msm_mux_blsp0_uart, + msm_mux_blsp1_i2c, + msm_mux_blsp1_spi, + msm_mux_blsp1_uart, + msm_mux_blsp2_i2c, + msm_mux_blsp2_spi, + msm_mux_blsp2_uart, + msm_mux_blsp3_i2c, + msm_mux_blsp3_spi, + msm_mux_blsp3_uart, + msm_mux_blsp4_i2c, + msm_mux_blsp4_spi, + msm_mux_blsp4_uart, + msm_mux_blsp5_i2c, + msm_mux_blsp5_uart, + msm_mux_cri_trng0, + msm_mux_cri_trng1, + msm_mux_cri_trng2, + msm_mux_cri_trng3, + msm_mux_cxc0, + msm_mux_cxc1, + msm_mux_dbg_out, + msm_mux_dwc_ddrphy, + msm_mux_gcc_plltest, + msm_mux_gcc_tlmm, + msm_mux_gpio, + msm_mux_mac00, + msm_mux_mac01, + msm_mux_mac10, + msm_mux_mac11, + msm_mux_mdc, + msm_mux_mdio, + msm_mux_pcie0_clk, + msm_mux_pcie0_wake, + msm_mux_pcie1_clk, + msm_mux_pcie1_wake, + msm_mux_pcie2_clk, + msm_mux_pcie2_wake, + msm_mux_pcie3_clk, + msm_mux_pcie3_wake, + msm_mux_prng_rosc0, + msm_mux_prng_rosc1, + msm_mux_prng_rosc2, + msm_mux_prng_rosc3, + msm_mux_pta1_0, + msm_mux_pta1_1, + msm_mux_pta1_2, + msm_mux_pta20, + msm_mux_pta21, + msm_mux_pwm00, + msm_mux_pwm01, + msm_mux_pwm02, + msm_mux_pwm03, + msm_mux_pwm04, + msm_mux_pwm10, + msm_mux_pwm11, + msm_mux_pwm12, + msm_mux_pwm13, + msm_mux_pwm14, + msm_mux_pwm20, + msm_mux_pwm21, + msm_mux_pwm22, + msm_mux_pwm23, + msm_mux_pwm24, + msm_mux_pwm30, + msm_mux_pwm31, + msm_mux_pwm32, + msm_mux_pwm33, + msm_mux_qdss_cti_trig_in_a0, + msm_mux_qdss_cti_trig_in_a1, + msm_mux_qdss_cti_trig_in_b0, + msm_mux_qdss_cti_trig_in_b1, + msm_mux_qdss_cti_trig_out_a0, + msm_mux_qdss_cti_trig_out_a1, + msm_mux_qdss_cti_trig_out_b0, + msm_mux_qdss_cti_trig_out_b1, + msm_mux_qdss_traceclk_a, + msm_mux_qdss_traceclk_b, + msm_mux_qdss_tracectl_a, + msm_mux_qdss_tracectl_b, + msm_mux_qdss_tracedata_a, + msm_mux_qdss_tracedata_b, + msm_mux_qspi_data, + msm_mux_qspi_clk, + msm_mux_qspi_cs, + msm_mux_rx0, + msm_mux_rx1, + msm_mux_sdc_data, + msm_mux_sdc_clk, + msm_mux_sdc_cmd, + msm_mux_sdc_rclk, + msm_mux_tsens_max, + msm_mux_wci20, + msm_mux_wci21, + msm_mux_wsa_swrm, + msm_mux__, +}; + +static const char *const gpio_groups[] = { +"gpio0" ,"gpio1" ,"gpio2" ,"gpio3" ,"gpio4" ,"gpio5" ,"gpio6" ,"gpio7" , +"gpio8" ,"gpio9" ,"gpio10" ,"gpio11" ,"gpio12" ,"gpio13" ,"gpio14" , +"gpio15" ,"gpio16" ,"gpio17" ,"gpio18" ,"gpio19" ,"gpio20" ,"gpio21" , +"gpio22" ,"gpio23" ,"gpio24" ,"gpio25" ,"gpio26" ,"gpio27" ,"gpio28" , +"gpio29" ,"gpio30" ,"gpio31" ,"gpio32" ,"gpio33" ,"gpio34" ,"gpio35" , +"gpio36" ,"gpio37" ,"gpio38" ,"gpio39" ,"gpio40" ,"gpio41" ,"gpio42" , +"gpio43" ,"gpio44" ,"gpio45" ,"gpio46" ,"gpio47" ,"gpio48" ,"gpio49" , +"gpio50" ,"gpio51" ,"gpio52" ,"gpio53" ,"gpio54" ,"gpio55" ,"gpio56" , +"gpio57" ,"gpio58" ,"gpio59" ,"gpio60" ,"gpio61" ,"gpio62" ,"gpio63" , +"gpio64" , +}; + +static const char *const sdc_data_groups[] = { +"gpio0" , +"gpio1" , +"gpio2" , +"gpio3" , +"gpio6" , +"gpio7" , +"gpio8" , +"gpio9" , +}; + +static const char *const qspi_data_groups[] = { +"gpio0" , +"gpio1" , +"gpio2" , +"gpio3" , +}; + +static const char *const qdss_traceclk_b_groups[] = { +"gpio0" , +}; + +static const char *const qdss_tracectl_b_groups[] = { +"gpio1" , +}; + +static const char *const qdss_tracedata_b_groups[] = { +"gpio2" ,"gpio3" ,"gpio4" ,"gpio5" ,"gpio6" ,"gpio7" ,"gpio8" ,"gpio9" , +"gpio10" ,"gpio11" ,"gpio12" ,"gpio13" ,"gpio14" ,"gpio15" ,"gpio16" , +"gpio17" , +}; + +static const char *const sdc_cmd_groups[] = { +"gpio4" , +}; + +static const char *const qspi_cs_groups[] = { +"gpio4" , +}; + +static const char *const sdc_clk_groups[] = { +"gpio5" , +}; + +static const char *const qspi_clk_groups[] = { +"gpio5" , +}; + +static const char *const sdc_rclk_groups[] = { +"gpio10" , +}; + +static const char *const blsp0_spi_groups[] = { +"gpio11" ,"gpio12" ,"gpio13" ,"gpio14" , +}; + +static const char *const blsp0_uart_groups[] = { +"gpio11" ,"gpio12" ,"gpio13" ,"gpio14" , +}; + +static const char *const blsp3_spi_groups[] = { +"gpio15" ,"gpio16" ,"gpio17" ,"gpio18" ,"gpio19" ,"gpio20" ,"gpio21" , +}; + +static const char *const blsp3_i2c_groups[] = { +"gpio15" ,"gpio16" , +}; + +static const char *const blsp3_uart_groups[] = { +"gpio15" ,"gpio16" ,"gpio17" ,"gpio18" , +}; + +static const char *const dbg_out_groups[] = { +"gpio17" , +}; + +static const char *const cri_trng0_groups[] = { +"gpio20" ,"gpio38" , +}; + +static const char *const cri_trng1_groups[] = { +"gpio21" ,"gpio34" , +}; + +static const char *const pcie0_clk_groups[] = { +"gpio22" , +}; + +static const char *const pta20_groups[] = { +"gpio22" ,"gpio23" ,"gpio24" , +}; + +static const char *const wci21_groups[] = { +"gpio23" ,"gpio24" , +}; + +static const char *const cxc0_groups[] = { +"gpio23" ,"gpio24" , +}; + +static const char *const pcie0_wake_groups[] = { +"gpio24" , +}; + +static const char *const qdss_cti_trig_out_b0_groups[] = { +"gpio24" , +}; + +static const char *const pcie1_clk_groups[] = { +"gpio25" , +}; + +static const char *const qdss_cti_trig_in_b0_groups[] = { +"gpio25" , +}; + +static const char *const atest_char0_groups[] = { +"gpio26" , +}; + +static const char *const qdss_cti_trig_out_b1_groups[] = { +"gpio26" , +}; + +static const char *const pcie1_wake_groups[] = { +"gpio27" , +}; + +static const char *const atest_char1_groups[] = { +"gpio27" , +}; + +static const char *const qdss_cti_trig_in_b1_groups[] = { +"gpio27" , +}; + +static const char *const pcie2_clk_groups[] = { +"gpio28" , +}; + +static const char *const atest_char2_groups[] = { +"gpio28" , +}; + +static const char *const atest_char3_groups[] = { +"gpio29" , +}; + +static const char *const pcie2_wake_groups[] = { +"gpio30" , +}; + +static const char *const pwm01_groups[] = { +"gpio30" , +}; + +static const char *const atest_char_groups[] = { +"gpio30" , +}; + +static const char *const pcie3_clk_groups[] = { +"gpio31" , +}; + +static const char *const pwm11_groups[] = { +"gpio31" , +}; + +static const char *const qdss_cti_trig_in_a1_groups[] = { +"gpio31" , +}; + +static const char *const pwm21_groups[] = { +"gpio32" , +}; + +static const char *const qdss_cti_trig_out_a1_groups[] = { +"gpio32" , +}; + +static const char *const pcie3_wake_groups[] = { +"gpio33" , +}; + +static const char *const pwm31_groups[] = { +"gpio33" , +}; + +static const char *const qdss_cti_trig_in_a0_groups[] = { +"gpio33" , +}; + +static const char *const blsp2_uart_groups[] = { +"gpio34" ,"gpio35" , +}; + +static const char *const blsp2_i2c_groups[] = { +"gpio34" ,"gpio35" , +}; + +static const char *const blsp2_spi_groups[] = { +"gpio34" ,"gpio35" ,"gpio36" ,"gpio37" , +}; + +static const char *const blsp1_uart_groups[] = { +"gpio34" ,"gpio35" ,"gpio36" ,"gpio37" , +}; + +static const char *const qdss_cti_trig_out_a0_groups[] = { +"gpio34" , +}; + +static const char *const cri_trng2_groups[] = { +"gpio35" , +}; + +static const char *const blsp1_i2c_groups[] = { +"gpio36" ,"gpio37" , +}; + +static const char *const cri_trng3_groups[] = { +"gpio36" , +}; + +static const char *const dwc_ddrphy_groups[] = { +"gpio37" , +}; + +static const char *const mdc_groups[] = { +"gpio38" , +}; + +static const char *const mdio_groups[] = { +"gpio39" , +}; + +static const char *const audio_pri_groups[] = { +"gpio40" ,"gpio41" ,"gpio42" ,"gpio43" ,"gpio61" ,"gpio61" , +}; + +static const char *const audio_pdm0_groups[] = { +"gpio40" ,"gpio41" ,"gpio42" ,"gpio43" , +}; + +static const char *const qdss_traceclk_a_groups[] = { +"gpio43" , +}; + +static const char *const pwm00_groups[] = { +"gpio44" , +}; + +static const char *const audio_sec_groups[] = { +"gpio44" ,"gpio45" ,"gpio46" ,"gpio47" ,"gpio62" ,"gpio62" , +}; + +static const char *const wsa_swrm_groups[] = { +"gpio44" ,"gpio45" , +}; + +static const char *const qdss_tracectl_a_groups[] = { +"gpio44" , +}; + +static const char *const pwm10_groups[] = { +"gpio45" , +}; + +static const char *const qdss_tracedata_a_groups[] = { +"gpio45" ,"gpio46" ,"gpio47" ,"gpio48" ,"gpio49" ,"gpio50" ,"gpio51" , +"gpio52" ,"gpio53" ,"gpio54" ,"gpio55" ,"gpio56" ,"gpio57" ,"gpio58" , +"gpio59" ,"gpio60" , +}; + +static const char *const pwm20_groups[] = { +"gpio46" , +}; + +static const char *const rx1_groups[] = { +"gpio46" , +}; + +static const char *const mac00_groups[] = { +"gpio46" , +}; + +static const char *const pwm30_groups[] = { +"gpio47" , +}; + +static const char *const mac01_groups[] = { +"gpio47" , +}; + +static const char *const blsp5_i2c_groups[] = { +"gpio48" ,"gpio49" , +}; + +static const char *const blsp5_uart_groups[] = { +"gpio48" ,"gpio49" , +}; + +static const char *const blsp4_uart_groups[] = { +"gpio50" ,"gpio51" ,"gpio52" ,"gpio53" , +}; + +static const char *const blsp4_i2c_groups[] = { +"gpio50" ,"gpio51" , +}; + +static const char *const blsp4_spi_groups[] = { +"gpio50" ,"gpio51" ,"gpio52" ,"gpio53" , +}; + +static const char *const pwm02_groups[] = { +"gpio50" , +}; + +static const char *const pwm12_groups[] = { +"gpio51" , +}; + +static const char *const pwm22_groups[] = { +"gpio52" , +}; + +static const char *const pwm32_groups[] = { +"gpio53" , +}; + +static const char *const pta1_1_groups[] = { +"gpio54" , +}; + +static const char *const pwm04_groups[] = { +"gpio54" , +}; + +static const char *const pta1_2_groups[] = { +"gpio55" , +}; + +static const char *const pwm14_groups[] = { +"gpio55" , +}; + +static const char *const pta1_0_groups[] = { +"gpio56" , +}; + +static const char *const pwm24_groups[] = { +"gpio56" , +}; + +static const char *const wci20_groups[] = { +"gpio57" ,"gpio58" , +}; + +static const char *const cxc1_groups[] = { +"gpio57" ,"gpio58" , +}; + +static const char *const mac10_groups[] = { +"gpio57" , +}; + +static const char *const pwm03_groups[] = { +"gpio57" , +}; + +static const char *const mac11_groups[] = { +"gpio58" , +}; + +static const char *const pwm13_groups[] = { +"gpio58" , +}; + +static const char *const rx0_groups[] = { +"gpio59" , +}; + +static const char *const pwm23_groups[] = { +"gpio59" , +}; + +static const char *const pwm33_groups[] = { +"gpio60" , +}; + +static const char *const prng_rosc0_groups[] = { +"gpio60" , +}; + +static const char *const gcc_plltest_groups[] = { +"gpio60" ,"gpio62" , +}; + +static const char *const blsp1_spi_groups[] = { +"gpio61" ,"gpio62" ,"gpio63" ,"gpio64" , +}; + +static const char *const audio_pdm1_groups[] = { +"gpio61" ,"gpio62" ,"gpio63" ,"gpio64" , +}; + +static const char *const pta21_groups[] = { +"gpio61" ,"gpio62" ,"gpio63" , +}; + +static const char *const prng_rosc1_groups[] = { +"gpio61" , +}; + +static const char *const gcc_tlmm_groups[] = { +"gpio61" , +}; + +static const char *const prng_rosc2_groups[] = { +"gpio62" , +}; + +static const char *const prng_rosc3_groups[] = { +"gpio63" , +}; + +static const char *const tsens_max_groups[] = { +"gpio64" , +}; + +static const struct msm_function ipq9574_functions[] = { +FUNCTION (atest_char), +FUNCTION (atest_char0), +FUNCTION (atest_char1), +FUNCTION (atest_char2), +FUNCTION (atest_char3), +FUNCTION (audio_pdm0), +FUNCTION (audio_pdm1), +FUNCTION (audio_pri), +FUNCTION (audio_sec), +FUNCTION (blsp0_spi), +FUNCTION (blsp0_uart), +FUNCTION (blsp1_i2c), +FUNCTION (blsp1_spi), +FUNCTION (blsp1_uart), +FUNCTION (blsp2_i2c), +FUNCTION (blsp2_spi), +FUNCTION (blsp2_uart), +FUNCTION (blsp3_i2c), +FUNCTION (blsp3_spi), +FUNCTION (blsp3_uart), +FUNCTION (blsp4_i2c), +FUNCTION (blsp4_spi), +FUNCTION (blsp4_uart), +FUNCTION (blsp5_i2c), +FUNCTION (blsp5_uart), +FUNCTION (cri_trng0), +FUNCTION (cri_trng1), +FUNCTION (cri_trng2), +FUNCTION (cri_trng3), +FUNCTION (cxc0), +FUNCTION (cxc1), +FUNCTION (dbg_out), +FUNCTION (dwc_ddrphy), +FUNCTION (gcc_plltest), +FUNCTION (gcc_tlmm), +FUNCTION (gpio), +FUNCTION (mac00), +FUNCTION (mac01), +FUNCTION (mac10), +FUNCTION (mac11), +FUNCTION (mdc), +FUNCTION (mdio), +FUNCTION (pcie0_clk), +FUNCTION (pcie0_wake), +FUNCTION (pcie1_clk), +FUNCTION (pcie1_wake), +FUNCTION (pcie2_clk), +FUNCTION (pcie2_wake), +FUNCTION (pcie3_clk), +FUNCTION (pcie3_wake), +FUNCTION (prng_rosc0), +FUNCTION (prng_rosc1), +FUNCTION (prng_rosc2), +FUNCTION (prng_rosc3), +FUNCTION (pta1_0), +FUNCTION (pta1_1), +FUNCTION (pta1_2), +FUNCTION (pta20), +FUNCTION (pta21), +FUNCTION (pwm00), +FUNCTION (pwm01), +FUNCTION (pwm02), +FUNCTION (pwm03), +FUNCTION (pwm04), +FUNCTION (pwm10), +FUNCTION (pwm11), +FUNCTION (pwm12), +FUNCTION (pwm13), +FUNCTION (pwm14), +FUNCTION (pwm20), +FUNCTION (pwm21), +FUNCTION (pwm22), +FUNCTION (pwm23), +FUNCTION (pwm24), +FUNCTION (pwm30), +FUNCTION (pwm31), +FUNCTION (pwm32), +FUNCTION (pwm33), +FUNCTION (qdss_cti_trig_in_a0), +FUNCTION (qdss_cti_trig_in_a1), +FUNCTION (qdss_cti_trig_in_b0), +FUNCTION (qdss_cti_trig_in_b1), +FUNCTION (qdss_cti_trig_out_a0), +FUNCTION (qdss_cti_trig_out_a1), +FUNCTION (qdss_cti_trig_out_b0), +FUNCTION (qdss_cti_trig_out_b1), +FUNCTION (qdss_traceclk_a), +FUNCTION (qdss_traceclk_b), +FUNCTION (qdss_tracectl_a), +FUNCTION (qdss_tracectl_b), +FUNCTION (qdss_tracedata_a), +FUNCTION (qdss_tracedata_b), +FUNCTION (qspi_data), +FUNCTION (qspi_clk), +FUNCTION (qspi_cs), +FUNCTION (rx0), +FUNCTION (rx1), +FUNCTION (sdc_data), +FUNCTION (sdc_clk), +FUNCTION (sdc_cmd), +FUNCTION (sdc_rclk), +FUNCTION (tsens_max), +FUNCTION (wci20), +FUNCTION (wci21), +FUNCTION (wsa_swrm), +}; + +static const struct msm_pingroup ipq9574_groups[] = { +PINGROUP (0 , sdc_data, qspi_data, qdss_traceclk_b, _, _, _, _, _, _), +PINGROUP (1 , sdc_data, qspi_data, qdss_tracectl_b, _, _, _, _, _, _), +PINGROUP (2 , sdc_data, qspi_data, qdss_tracedata_b, _, _, _, _, _, _), +PINGROUP (3 , sdc_data, qspi_data, qdss_tracedata_b, _, _, _, _, _, _), +PINGROUP (4 , sdc_cmd, qspi_cs, qdss_tracedata_b, _, _, _, _, _, _), +PINGROUP (5 , sdc_clk, qspi_clk, qdss_tracedata_b, _, _, _, _, _, + _), +PINGROUP (6 , sdc_data, qdss_tracedata_b, _, _, _, _, _, _, _), +PINGROUP (7 , sdc_data, qdss_tracedata_b, _, _, _, _, _, _, _), +PINGROUP (8 , sdc_data, qdss_tracedata_b, _, _, _, _, _, _, _), +PINGROUP (9 , sdc_data, qdss_tracedata_b, _, _, _, _, _, _, _), +PINGROUP (10 , sdc_rclk, qdss_tracedata_b, _, _, _, _, _, _, _), +PINGROUP (11 , blsp0_spi, blsp0_uart, qdss_tracedata_b, _, _, _, _, + _, _), +PINGROUP (12 , blsp0_spi, blsp0_uart, qdss_tracedata_b, _, _, _, _, + _, _), +PINGROUP (13 , blsp0_spi, blsp0_uart, qdss_tracedata_b, _, _, _, _, + _, _), +PINGROUP (14 , blsp0_spi, blsp0_uart, qdss_tracedata_b, _, _, _, _, + _, _), +PINGROUP (15 , blsp3_spi, blsp3_i2c, blsp3_uart, qdss_tracedata_b, _, + _, _, _, _), +PINGROUP (16 , blsp3_spi, blsp3_i2c, blsp3_uart, qdss_tracedata_b, _, + _, _, _, _), +PINGROUP (17 , blsp3_spi, blsp3_uart, dbg_out, qdss_tracedata_b, _, _, + _, _, _), +PINGROUP (18 , blsp3_spi, blsp3_uart, _, _, _, _, _, _, _), +PINGROUP (19 , blsp3_spi, _, _, _, _, _, _, _, _), +PINGROUP (20 , blsp3_spi, _, cri_trng0, _, _, _, _, _, _), +PINGROUP (21 , blsp3_spi, _, cri_trng1, _, _, _, _, _, _), +PINGROUP (22 , pcie0_clk, _, pta20, _, _, _, _, _, _), +PINGROUP (23 , _, pta20, wci21, cxc0, _, _, _, _, _), +PINGROUP (24 , pcie0_wake, _, pta20, wci21, cxc0, _, + qdss_cti_trig_out_b0, _, _), +PINGROUP (25 , pcie1_clk, _, _, qdss_cti_trig_in_b0, _, _, _, _, + _), +PINGROUP (26 , _, atest_char0, _, qdss_cti_trig_out_b1, _, _, _, _, + _), +PINGROUP (27 , pcie1_wake, _, atest_char1, qdss_cti_trig_in_b1, _, _, + _, _, _), +PINGROUP (28 , pcie2_clk, atest_char2, _, _, _, _, _, _, _), +PINGROUP (29 , atest_char3, _, _, _, _, _, _, _, _), +PINGROUP (30 , pcie2_wake, pwm01, atest_char, _, _, _, _, _, _), +PINGROUP (31 , pcie3_clk, pwm11, _, qdss_cti_trig_in_a1, _, _, _, _, + _), +PINGROUP (32 , pwm21, _, qdss_cti_trig_out_a1, _, _, _, _, _, _), +PINGROUP (33 , pcie3_wake, pwm31, _, qdss_cti_trig_in_a0, _, _, _, + _, _), +PINGROUP (34 , blsp2_uart, blsp2_i2c, blsp2_spi, blsp1_uart, _, + cri_trng1, qdss_cti_trig_out_a0, _, _), +PINGROUP (35 , blsp2_uart, blsp2_i2c, blsp2_spi, blsp1_uart, _, + cri_trng2, _, _, _), +PINGROUP (36 , blsp1_uart, blsp1_i2c, blsp2_spi, _, cri_trng3, _, _, + _, _), +PINGROUP (37 , blsp1_uart, blsp1_i2c, blsp2_spi, _, dwc_ddrphy, _, _, + _, _), +PINGROUP (38 , mdc, _, cri_trng0, _, _, _, _, _, _), +PINGROUP (39 , mdio, _, _, _, _, _, _, _, _), +PINGROUP (40 , audio_pri, audio_pdm0, _, _, _, _, _, _, _), +PINGROUP (41 , audio_pri, audio_pdm0, _, _, _, _, _, _, _), +PINGROUP (42 , audio_pri, audio_pdm0, _, _, _, _, _, _, _), +PINGROUP (43 , audio_pri, audio_pdm0, _, qdss_traceclk_a, _, _, _, + _, _), +PINGROUP (44 , pwm00, audio_sec, wsa_swrm, _, qdss_tracectl_a, _, _, + _, _), +PINGROUP (45 , pwm10, audio_sec, wsa_swrm, _, qdss_tracedata_a, _, _, + _, _), +PINGROUP (46 , pwm20, audio_sec, rx1, mac00, _, qdss_tracedata_a, _, + _, _), +PINGROUP (47 , pwm30, audio_sec, mac01, _, qdss_tracedata_a, _, _, _, + _), +PINGROUP (48 , blsp5_i2c, blsp5_uart, _, qdss_tracedata_a, _, _, _, + _, _), +PINGROUP (49 , blsp5_i2c, blsp5_uart, _, qdss_tracedata_a, _, _, _, + _, _), +PINGROUP (50 , blsp4_uart, blsp4_i2c, blsp4_spi, pwm02, qdss_tracedata_a, + _, _, _, _), +PINGROUP (51 , blsp4_uart, blsp4_i2c, blsp4_spi, pwm12, qdss_tracedata_a, + _, _, _, _), +PINGROUP (52 , blsp4_uart, blsp4_spi, pwm22, qdss_tracedata_a, _, _, + _, _, _), +PINGROUP (53 , blsp4_uart, blsp4_spi, pwm32, qdss_tracedata_a, _, _, + _, _, _), +PINGROUP (54 , pta1_1, pwm04, qdss_tracedata_a, _, _, _, _, _, _), +PINGROUP (55 , pta1_2, pwm14, qdss_tracedata_a, _, _, _, _, _, _), +PINGROUP (56 , pta1_0, pwm24, qdss_tracedata_a, _, _, _, _, _, _), +PINGROUP (57 , wci20, cxc1, mac10, pwm03, qdss_tracedata_a, _, _, _, + _), +PINGROUP (58 , wci20, cxc1, mac11, pwm13, qdss_tracedata_a, _, _, _, + _), +PINGROUP (59 , rx0, pwm23, qdss_tracedata_a, _, _, _, _, _, _), +PINGROUP (60 , pwm33, prng_rosc0, qdss_tracedata_a, _, gcc_plltest, _, + _, _, _), +PINGROUP (61 , blsp1_spi, audio_pri, audio_pdm1, audio_pri, pta21, + prng_rosc1, gcc_tlmm, _, _), +PINGROUP (62 , blsp1_spi, audio_sec, audio_pdm1, audio_sec, pta21, + prng_rosc2, gcc_plltest, _, _), +PINGROUP (63 , blsp1_spi, audio_pdm1, pta21, prng_rosc3, _, _, _, _, + _), +PINGROUP (64 , blsp1_spi, audio_pdm1, tsens_max, _, _, _, _, _, _), +}; + +static const struct msm_pinctrl_soc_data ipq9574_pinctrl = { + .pins = ipq9574_pins, + .npins =ARRAY_SIZE (ipq9574_pins), + .functions = ipq9574_functions, + .nfunctions =ARRAY_SIZE (ipq9574_functions), + .groups = ipq9574_groups, + .ngroups =ARRAY_SIZE (ipq9574_groups), + .ngpios =65 , +}; + +static int ipq9574_pinctrl_probe (struct platform_device *pdev) +{ +return msm_pinctrl_probe (pdev, &ipq9574_pinctrl); +}
drivers/pinctrl/qcom/pinctrl-ipq9574.c line 982
Quoted 10 lines
drivers/pinctrl/qcom/pinctrl-ipq9574.c new file +10
-0+ +static const struct of_device_id ipq9574_pinctrl_of_match[] = { + { .compatible ="qcom,ipq9574-tlmm" , }, + { }, +}; + +static struct platform_driver ipq9574_pinctrl_driver = { + .driver = { + .name ="ipq9574-tlmm" , + .owner =THIS_MODULE ,
Please drop the .owner field, it is taken care by platform_driver_register().
Quoted 11 lines
drivers/pinctrl/qcom/pinctrl-ipq9574.c new file +11
-0+ .of_match_table = ipq9574_pinctrl_of_match, + }, + .probe = ipq9574_pinctrl_probe, + .remove = msm_pinctrl_remove, +}; + +static int __init ipq9574_pinctrl_init (void ) +{ +return platform_driver_register (&ipq9574_pinctrl_driver); +} +arch_initcall (ipq9574_pinctrl_init);
drivers/pinctrl/qcom/pinctrl-ipq9574.c line 1003
Quoted 10 lines
drivers/pinctrl/qcom/pinctrl-ipq9574.c new file +10
-0+ +static void __exit ipq9574_pinctrl_exit(void) +{ +platform_driver_unregister (&ipq9574_pinctrl_driver); +} +module_exit (ipq9574_pinctrl_exit); + +MODULE_DESCRIPTION ("QTI IPQ9574 TLMM driver" ); +MODULE_LICENSE ("GPL" ); +MODULE_DEVICE_TABLE (of, ipq9574_pinctrl_of_match);
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 5/7 dt-bindings: qcom: Add ipq9574 bindings
In reply to devi priyaDocument the new ipq9574 SOC/board device tree bindings
--- Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++ 1 file changed, 7 insertions(+)
Documentation/devicetree/bindings/arm/qcom.yaml +7 -0
@@ -32,6 +32,7 @@ description: | ipq4018 ipq6018 ipq8074 + ipq9574 mdm9615 msm8226 msm8916
@@ -80,6 +81,7 @@ description: | hk01 hk10-c1 hk10-c2 + ap-al02-c7 idp liquid mtp
@@ -304,6 +306,11 @@ properties: - qcom,ipq8074-hk10-c2 - const: qcom,ipq8074 + - items: + - enum: + - qcom,ipq9574-ap-al02-c7 + - const: qcom,ipq9574 + - description: Sierra Wireless MangOH Green with WP8548 Module items: - const: swir,mangoh-green-wp8548
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 5/7] dt-bindings: qcom: Add ipq9574 bindings
Quoted 22 lines · devi priya
Document the new ipq9574 SOC/board device tree bindings
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Signed-off-by devi priya <[email protected]>--- Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++ 1 file changed, 7 insertions(+)Documentation/devicetree/bindings/arm/qcom.yaml +1
-0@@ -32,6 +32,7 @@ description: | ipq4018 ipq6018 ipq8074 + ipq9574 mdm9615 msm8226 msm8916
Documentation/devicetree/bindings/arm/qcom.yaml description: | · line 84
Quoted 4 lines
Documentation/devicetree/bindings/arm/qcom.yaml +1
-0@@ -80,6 +81,7 @@ description: | hk01 hk10-c1 hk10-c2 + ap-al02-c7
'a' rarely goes after 'h'.
Documentation/devicetree/bindings/arm/qcom.yaml properties: · line 307
Quoted 6 lines
Documentation/devicetree/bindings/arm/qcom.yaml +0
-0idp liquid mtp@@ -304,6 +306,11 @@ properties: - qcom,ipq8074-hk10-c2 - const: qcom,ipq8074
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 5/7] dt-bindings: qcom: Add ipq9574 bindings
Quoted 21 lines · Krzysztof Kozlowski
Quoted 20 lines · devi priya
Document the new ipq9574 SOC/board device tree bindings
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Signed-off-by devi priya <[email protected]>--- Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++ 1 file changed, 7 insertions(+)Documentation/devicetree/bindings/arm/qcom.yaml +1
-0@@ -32,6 +32,7 @@ description: | ipq4018 ipq6018 ipq8074 + ipq9574 mdm9615 msm8226
Quoted 8 lines
Documentation/devicetree/bindings/arm/qcom.yaml description: | · line 84
Quoted 6 lines
Documentation/devicetree/bindings/arm/qcom.yaml +1
-0msm8916@@ -80,6 +81,7 @@ description: | hk01 hk10-c1 hk10-c2 + ap-al02-c7'a' rarely goes after 'h'.
Sure, will update!
Quoted 11 lines
Documentation/devicetree/bindings/arm/qcom.yaml properties: · line 307
Quoted 7 lines
Documentation/devicetree/bindings/arm/qcom.yaml +0
-0idp liquid mtp@@ -304,6 +306,11 @@ properties: - qcom,ipq8074-hk10-c2 - const: qcom,ipq8074Best regards,
Krzysztof
Best Regards,
Devi Priya
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 6/7 arm64: dts: Add ipq9574 SoC and AL02 board support
In reply to devi priyaFrom: POOVENDHAN SELVARAJ <[email protected]>
Add initial device tree support for Qualcomm IPQ9574 SoC and AL02 board
--- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts | 69 ++++ arch/arm64/boot/dts/qcom/ipq9574.dtsi | 318 +++++++++++++++++++ 3 files changed, 388 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi
arch/arm64/boot/dts/qcom/Makefile +1 -0
@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-al02-c7.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +69 -0
69 lines not on this page · raw message
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +318 -0
318 lines not on this page · raw message
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 6/7] arm64: dts: Add ipq9574 SoC and AL02 board support
Quoted 36 lines · devi priya
From: POOVENDHAN SELVARAJ <[email protected]>
Add initial device tree support for Qualcomm IPQ9574 SoC and AL02 board
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Co-developed-by devi priya <[email protected]>Signed-off-by devi priya <[email protected]>Signed-off-by POOVENDHAN SELVARAJ <[email protected]>--- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts | 69 ++++ arch/arm64/boot/dts/qcom/ipq9574.dtsi | 318 +++++++++++++++++++ 3 files changed, 388 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsiarch/arm64/boot/dts/qcom/Makefile +1
-0@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-al02-c7.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtbarch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +0
-0
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts line 1
Quoted 1 line
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +1
-0@@ -0,0 +1,69 @@ +// SPDX-License-Identifier: GPL-2.0-only
BSD3?
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts line 6
Quoted 5 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +5
-0+/* + * IPQ9574 AL02-C7 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
Happy new year!
Quoted 24 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +24
-0+ */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; + compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; + interrupt-parent = <&intc>; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay";
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts line 40
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +10
-0+}; + +&sdhc_1 { + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tlmm { + emmc_pins: emmc-state {
sdc_default? I suppose you'll introduce a corresponding sleep state later on, so that'll be easier to distinguish.
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts line 46
Quoted 6 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +6
-0+ emmc-clk-pins { + pins = "gpio5"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + };
Please add a newline between subsequent nodes.
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts line 56
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +10
-0+ emmc-cmd-pins { + pins = "gpio4"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + emmc-data-pins { + pins = "gpio0", "gpio1", "gpio2", + "gpio3", "gpio6", "gpio7", + "gpio8", "gpio9";
The indentation here is wrong.
Quoted 28 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +13
-0+ function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + emmc-rclk-pins { + pins = "gpio10"; + function = "sdc_rclk"; + drive-strength = <8>; + bias-pull-down; + }; + }; + +};arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +9
-0@@ -0,0 +1,318 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * IPQ9574 SoC device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h>
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 19
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+#include <dt-bindings/clock/qcom,gcc-ipq9574.h> +#include <dt-bindings/reset/qcom,gcc-ipq9574.h> + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + bias_pll_ubi_nc_clk: bias_pll_ubi_nc_clk {
Could you tell us something about the purpose of this clock? First time seeing it, your gcc driver reveals it's connected to at least PCIe.
Quoted 24 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +24
-0+ compatible = "fixed-clock"; + clock-frequency = <353000000>; + #clock-cells = <0>; + }; + + pcie30_phy0_pipe_clk: pcie30_phy0_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + }; + + pcie30_phy1_pipe_clk: pcie30_phy1_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + }; + + pcie30_phy2_pipe_clk: pcie30_phy2_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + }; + + pcie30_phy3_pipe_clk: pcie30_phy3_pipe_clk {
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 53
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+ compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + }; + + usb3phy_0_cc_pipe_clk: usb3phy_0_cc_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + #clock-cells = <0>; + };
Do not define these pipe clocks. You can leave the GCC entries as <0> until you introduce the QMPPHY support, which then you can feed as it provides these clocks.
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 63
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+ + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + + xo_board_clk: xo-board-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>;
The clock frequency should be moved to the device DT, because the clock is on the board and not on the SoC.
Quoted 61 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +61
-0+ #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x40000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,cortex-a73-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + };
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 134
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+ + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz_region: memory@4a600000 { + reg = <0x0 0x4a600000 0x0 0x400000>; + no-map; + };
That's.. surprisingly little reserved memory.. No hyp? No PIL regions that make the board explode when something touches them?
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 140
Quoted 6 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +6
-0+ }; + + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>;
Is 32 bits enough for this SoC's bus? Newer ones use 36 or more..
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 150
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+ compatible = "simple-bus"; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq9574-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 65>; + gpio-reserved-ranges = <59 1>;
I see it's assigned to [rx0, pwm23, qdss_tracedata_a].. Is this board-specific or is this pin supposed to be forbidden on all IPQ9574 boards?
Quoted 20 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +20
-0+ interrupt-controller; + #interrupt-cells = <2>; + + uart2_pins: uart2-state { + pins = "gpio34", "gpio35"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-disable; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-ipq9574"; + reg = <0x1800000 0x80000>; + clocks = <&xo_board_clk>, + <&sleep_clk>, + <&bias_pll_ubi_nc_clk>, + <&pcie30_phy0_pipe_clk>, + <&pcie30_phy1_pipe_clk>, + <&pcie30_phy2_pipe_clk>,
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 180
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+ <&pcie30_phy3_pipe_clk>, + <&usb3phy_0_cc_pipe_clk>; + clock-names = "xo", + "sleep_clk", + "bias_pll_ubi_nc_clk", + "pcie30_phy0_pipe_clk", + "pcie30_phy1_pipe_clk", + "pcie30_phy2_pipe_clk", + "pcie30_phy3_pipe_clk", + "usb3phy_0_cc_pipe_clk";
Please touch up the indentation.
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 191
Quoted 11 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +11
-0+ #clock-cells = <1>; + #reset-cells = <1>; + }; + + sdhc_1: sdhci@7804000 { + compatible = "qcom,sdhci-msm-v5"; + reg = <0x7804000 0x1000>, <0x7805000 0x1000>; + reg-names = "hc_mem", "cmdq_mem"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
Please touch up the indentation.
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 196
Quoted 5 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +5
-0+ interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&xo_board_clk>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>;
Please touch up the indentation.
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 197
Quoted 1 line
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +1
-0+ clock-names = "xo", "iface", "core";
The order should be "iface", "core", "xo" as per Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 201
Quoted 4 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +4
-0+ mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe;
Are these the limitations of the controller? Otherwise they should probably be moved to the device-specific DT.
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 204
Quoted 4 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +3
-0+ max-frequency = <384000000>; + bus-width = <8>; + non-removable;
And this property too.
Quoted 42 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +42
-0+ status = "disabled"; + }; + + blsp1_uart2: serial@78b1000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b1000 0x200>; + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x0b000000 0x1000>, /* GICD */ + <0x0b002000 0x1000>, /* GICC */ + <0x0b001000 0x1000>, /* GICH */ + <0x0b004000 0x1000>; /* GICV */ + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + ranges = <0 0x0b00c000 0x3000>; + + v2m0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + reg = <0x0 0xffd>; + msi-controller; + }; + + v2m1: v2m@1 { + compatible = "arm,gic-v2m-frame"; + reg = <0x1000 0xffd>; + msi-controller; + }; + + v2m2: v2m@2 { + compatible = "arm,gic-v2m-frame"; + reg = <0x2000 0xffd>; + msi-controller;
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 256
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+ }; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0xb120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <24000000>;
Drop, something earlier in the boot chain already writes to CNTFRQ_ELn.
Quoted 50 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +50
-0+ + frame@b120000 { + reg = <0xb121000 0x1000>, + <0xb122000 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@b123000 { + reg = <0xb123000 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b124000 { + reg = <0xb124000 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0xb125000 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0xb126000 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0xb127000 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0xb128000 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + };
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 316
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+ }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <24000000>;
Drop, something earlier in the boot chain already writes to CNTFRQ_ELn.
Konrad
Quoted 2 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +2
-0+ }; +};
Re: [PATCH 6/7] arm64: dts: Add ipq9574 SoC and AL02 board support
Quoted 33 lines · Konrad Dybcio
Quoted 30 lines · devi priya
From: POOVENDHAN SELVARAJ <[email protected]>
Add initial device tree support for Qualcomm IPQ9574 SoC and AL02 board
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Co-developed-by devi priya <[email protected]>Signed-off-by devi priya <[email protected]>Signed-off-by POOVENDHAN SELVARAJ <[email protected]>--- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts | 69 ++++ arch/arm64/boot/dts/qcom/ipq9574.dtsi | 318 +++++++++++++++++++ 3 files changed, 388 insertions(+)create mode 100644
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtscreate mode 100644arch/arm64/boot/dts/qcom/ipq9574.dtsiarch/arm64/boot/dts/qcom/Makefile +1
-0@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-al02-c7.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb
Quoted 9 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts line 1
Quoted 7 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +1
-0@@ -0,0 +1,69 @@ +// SPDX-License-Identifier: GPL-2.0-onlyBSD3?
Sure, will add dual license
Quoted 7 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts line 6
Quoted 5 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +5
-0+/* + * IPQ9574 AL02-C7 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.Happy new year!
Sure, will update!
Quoted 28 lines
Quoted 28 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +28
-0+ */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; + compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; + interrupt-parent = <&intc>; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&emmc_pins>;
Quoted 8 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts line 40
Quoted 6 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +6
-0+ pinctrl-names = "default"; + status = "okay"; +}; + +&tlmm { + emmc_pins: emmc-state {
sdc_default? I suppose you'll introduce a corresponding sleep state later on, so that'll be easier to distinguish.
Sure, will update the node name. But, we don't have power management states. It would always be in the running state.
Quoted 8 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts line 46
Quoted 7 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +6
-0+ emmc-clk-pins { + pins = "gpio5"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + };Please add a newline between subsequent nodes.
Sure, okay
Quoted 11 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts line 56
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +10
-0+ emmc-cmd-pins { + pins = "gpio4"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + emmc-data-pins { + pins = "gpio0", "gpio1", "gpio2", + "gpio3", "gpio6", "gpio7", + "gpio8", "gpio9";The indentation here is wrong.
Sure, will update
Quoted 34 lines
Quoted 34 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +13
-0+ function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + emmc-rclk-pins { + pins = "gpio10"; + function = "sdc_rclk"; + drive-strength = <8>; + bias-pull-down; + }; + }; + +};arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +14
-0@@ -0,0 +1,318 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * IPQ9574 SoC device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-ipq9574.h> +#include <dt-bindings/reset/qcom,gcc-ipq9574.h> + +/ { + interrupt-parent = <&intc>;
Quoted 8 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 19
Quoted 5 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +5
-0+ #address-cells = <2>; + #size-cells = <2>; + + clocks { + bias_pll_ubi_nc_clk: bias_pll_ubi_nc_clk {Could you tell us something about the purpose of this clock? First time seeing it, your gcc driver reveals it's connected to at least PCIe.
Bias_pll_ubi_nc_clk (353MHz) is a backup source for Q6_AXIM2_CLK/PCIE2_AXIM_CLK/PCIE3_AXIM_CLK/SNOC-CLK.
Quoted 30 lines
Quoted 30 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +29
-0+ compatible = "fixed-clock"; + clock-frequency = <353000000>; + #clock-cells = <0>; + }; + + pcie30_phy0_pipe_clk: pcie30_phy0_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + }; + + pcie30_phy1_pipe_clk: pcie30_phy1_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + }; + + pcie30_phy2_pipe_clk: pcie30_phy2_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + }; + + pcie30_phy3_pipe_clk: pcie30_phy3_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + }; +
Quoted 8 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 53
Quoted 5 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +5
-0+ usb3phy_0_cc_pipe_clk: usb3phy_0_cc_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + #clock-cells = <0>; + };Do not define these pipe clocks. You can leave the GCC entries as <0> until you introduce the QMPPHY support, which then you can feed as it provides these clocks.
Sure, okay
Quoted 13 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 63
Quoted 11 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+ + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + + xo_board_clk: xo-board-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>;The clock frequency should be moved to the device DT, because the clock is on the board and not on the SoC.
Okay, will move to device DT
Quoted 66 lines
Quoted 66 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +65
-0+ #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x40000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,cortex-a73-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>;
Quoted 9 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 134
Quoted 6 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +6
-0+ ranges; + + tz_region: memory@4a600000 { + reg = <0x0 0x4a600000 0x0 0x400000>; + no-map; + };That's.. surprisingly little reserved memory.. No hyp? No PIL regions that make the board explode when something touches them?
The reserved memory for TZ region is 4Mb. yes,we have hypervisor and PIL regions. The memory for PIL region will be separately reserved by the remoteproc
Quoted 7 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 140
Quoted 6 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +6
-0+ }; + + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>;Is 32 bits enough for this SoC's bus? Newer ones use 36 or more..
Yes, as the maximum range supported by ipq9574 is 4GB, 32 bits would be sufficient
Quoted 14 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 150
Quoted 11 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+ compatible = "simple-bus"; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq9574-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 65>; + gpio-reserved-ranges = <59 1>;I see it's assigned to [rx0, pwm23,
qdss_tracedata_a].. Is this board-specific or is this pin supposed to be forbidden on all IPQ9574 boards?
This pin is reserved by TZ and is forbidden on all IPQ9574 boards.
Quoted 24 lines
Quoted 24 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +23
-0+ interrupt-controller; + #interrupt-cells = <2>; + + uart2_pins: uart2-state { + pins = "gpio34", "gpio35"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-disable; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-ipq9574"; + reg = <0x1800000 0x80000>; + clocks = <&xo_board_clk>, + <&sleep_clk>, + <&bias_pll_ubi_nc_clk>, + <&pcie30_phy0_pipe_clk>, + <&pcie30_phy1_pipe_clk>, + <&pcie30_phy2_pipe_clk>, + <&pcie30_phy3_pipe_clk>, + <&usb3phy_0_cc_pipe_clk>; + clock-names = "xo",
Quoted 9 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 180
Quoted 7 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +7
-0+ "sleep_clk", + "bias_pll_ubi_nc_clk", + "pcie30_phy0_pipe_clk", + "pcie30_phy1_pipe_clk", + "pcie30_phy2_pipe_clk", + "pcie30_phy3_pipe_clk", + "usb3phy_0_cc_pipe_clk";Please touch up the indentation.
Sure okay
Quoted 4 lines
Quoted 4 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +4
-0+ #clock-cells = <1>; + #reset-cells = <1>; + }; +
Quoted 8 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 191
Quoted 7 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +7
-0+ sdhc_1: sdhci@7804000 { + compatible = "qcom,sdhci-msm-v5"; + reg = <0x7804000 0x1000>, <0x7805000 0x1000>; + reg-names = "hc_mem", "cmdq_mem"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;Please touch up the indentation.
Okay
Quoted 8 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 196
Quoted 6 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +5
-0+ interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&xo_board_clk>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>;Please touch up the indentation.
Sure, will do
Quoted 2 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 197
Quoted 1 line
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +1
-0+ clock-names = "xo", "iface", "core";The order should be "iface", "core", "xo" as per
Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
Got it, will update
Quoted 7 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 201
Quoted 5 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +4
-0+ mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe;Are these the limitations of the controller? Otherwise they should probably be moved to the device-specific DT.
Yes, these are specific to the controller, hence added them in SoC
Quoted 6 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 204
Quoted 5 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +3
-0+ max-frequency = <384000000>; + bus-width = <8>; + non-removable;And this property too.
Yes, it is specific to the controller
Quoted 45 lines
Quoted 45 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +45
-0+ status = "disabled"; + }; + + blsp1_uart2: serial@78b1000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b1000 0x200>; + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x0b000000 0x1000>, /* GICD */ + <0x0b002000 0x1000>, /* GICC */ + <0x0b001000 0x1000>, /* GICH */ + <0x0b004000 0x1000>; /* GICV */ + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + ranges = <0 0x0b00c000 0x3000>; + + v2m0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + reg = <0x0 0xffd>; + msi-controller; + }; + + v2m1: v2m@1 { + compatible = "arm,gic-v2m-frame"; + reg = <0x1000 0xffd>; + msi-controller; + }; + + v2m2: v2m@2 { + compatible = "arm,gic-v2m-frame"; + reg = <0x2000 0xffd>; + msi-controller; + }; + }; +
Quoted 9 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 256
Quoted 7 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +7
-0+ timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0xb120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <24000000>;Drop, something earlier in the boot chain already writes to
CNTFRQ_ELn.
Sure, okay
Quoted 53 lines
Quoted 53 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +53
-0+ + frame@b120000 { + reg = <0xb121000 0x1000>, + <0xb122000 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@b123000 { + reg = <0xb123000 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b124000 { + reg = <0xb124000 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0xb125000 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0xb126000 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0xb127000 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0xb128000 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + }; +
Quoted 9 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 316
Quoted 7 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +7
-0+ timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <24000000>;Drop, something earlier in the boot chain already writes to
CNTFRQ_ELn.
Okay
Quoted 3 lines
Konrad
arch/arm64/boot/dts/qcom/ipq9574.dtsi
Quoted 2 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +2
-0+ }; +};
Best Regards,
Devi Priya
Re: [PATCH 6/7] arm64: dts: Add ipq9574 SoC and AL02 board support
In reply to devi priyaQuoted 36 lines · devi priya
From: POOVENDHAN SELVARAJ <[email protected]>
Add initial device tree support for Qualcomm IPQ9574 SoC and AL02 board
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Co-developed-by devi priya <[email protected]>Signed-off-by devi priya <[email protected]>Signed-off-by POOVENDHAN SELVARAJ <[email protected]>--- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts | 69 ++++ arch/arm64/boot/dts/qcom/ipq9574.dtsi | 318 +++++++++++++++++++ 3 files changed, 388 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsiarch/arm64/boot/dts/qcom/Makefile +1
-0@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-al02-c7.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtbarch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +0
-0
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts line 1
Quoted 1 line
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +1
-0@@ -0,0 +1,69 @@ +// SPDX-License-Identifier: GPL-2.0-only
Not dual licensed? Not BSD?
Quoted 83 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +68
-0+/* + * IPQ9574 AL02-C7 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; + compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; + interrupt-parent = <&intc>; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tlmm { + emmc_pins: emmc-state { + emmc-clk-pins { + pins = "gpio5"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + emmc-cmd-pins { + pins = "gpio4"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + emmc-data-pins { + pins = "gpio0", "gpio1", "gpio2", + "gpio3", "gpio6", "gpio7", + "gpio8", "gpio9"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + emmc-rclk-pins { + pins = "gpio10"; + function = "sdc_rclk"; + drive-strength = <8>; + bias-pull-down; + }; + }; + +};arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +9
-0@@ -0,0 +1,318 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * IPQ9574 SoC device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h>
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 19
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+#include <dt-bindings/clock/qcom,gcc-ipq9574.h> +#include <dt-bindings/reset/qcom,gcc-ipq9574.h> + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + bias_pll_ubi_nc_clk: bias_pll_ubi_nc_clk {
No undercores in node names.
Quoted 28 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +28
-0+ compatible = "fixed-clock"; + clock-frequency = <353000000>; + #clock-cells = <0>; + }; + + pcie30_phy0_pipe_clk: pcie30_phy0_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + }; + + pcie30_phy1_pipe_clk: pcie30_phy1_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + }; + + pcie30_phy2_pipe_clk: pcie30_phy2_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + }; + + pcie30_phy3_pipe_clk: pcie30_phy3_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + };
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 57
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+ + usb3phy_0_cc_pipe_clk: usb3phy_0_cc_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>;
That's not a property of the SoC, but board. Either entire clock or at least frequency to indicate that the board is providing the clock.
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 63
Quoted 5 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +5
-0+ #clock-cells = <0>;> + }; + + xo_board_clk: xo-board-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>;
Ditto.
Quoted 77 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +77
-0+ #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x40000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,cortex-a73-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz_region: memory@4a600000 { + reg = <0x0 0x4a600000 0x0 0x400000>; + no-map; + }; + }; + + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>;
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 150
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+ compatible = "simple-bus"; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq9574-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 65>; + gpio-reserved-ranges = <59 1>;
Hm, why reserved ranges are in SoC?
Quoted 14 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +14
-0+ interrupt-controller; + #interrupt-cells = <2>; + + uart2_pins: uart2-state { + pins = "gpio34", "gpio35"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-disable; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-ipq9574"; + reg = <0x1800000 0x80000>;
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 174
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+ clocks = <&xo_board_clk>, + <&sleep_clk>, + <&bias_pll_ubi_nc_clk>, + <&pcie30_phy0_pipe_clk>, + <&pcie30_phy1_pipe_clk>, + <&pcie30_phy2_pipe_clk>, + <&pcie30_phy3_pipe_clk>, + <&usb3phy_0_cc_pipe_clk>; + clock-names = "xo", + "sleep_clk",
Misaligned. Multiple other places probably as well.
Quoted 7 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +7
-0+ "bias_pll_ubi_nc_clk", + "pcie30_phy0_pipe_clk", + "pcie30_phy1_pipe_clk", + "pcie30_phy2_pipe_clk", + "pcie30_phy3_pipe_clk", + "usb3phy_0_cc_pipe_clk"; + #clock-cells = <1>;
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 191
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+ #reset-cells = <1>; + }; + + sdhc_1: sdhci@7804000 { + compatible = "qcom,sdhci-msm-v5"; + reg = <0x7804000 0x1000>, <0x7805000 0x1000>; + reg-names = "hc_mem", "cmdq_mem"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
Like here.
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 196
Quoted 5 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +5
-0+ interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&xo_board_clk>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>;
And here
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 197
Quoted 1 line
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +1
-0+ clock-names = "xo", "iface", "core";
Does not look like you tested the bindings. Please run make dt_binding_check (see Documentation/devicetree/bindings/writing-schema.rst for instructions).
Quoted 109 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +109
-0+ mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + max-frequency = <384000000>; + bus-width = <8>; + non-removable; + status = "disabled"; + }; + + blsp1_uart2: serial@78b1000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b1000 0x200>; + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x0b000000 0x1000>, /* GICD */ + <0x0b002000 0x1000>, /* GICC */ + <0x0b001000 0x1000>, /* GICH */ + <0x0b004000 0x1000>; /* GICV */ + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + ranges = <0 0x0b00c000 0x3000>; + + v2m0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + reg = <0x0 0xffd>; + msi-controller; + }; + + v2m1: v2m@1 { + compatible = "arm,gic-v2m-frame"; + reg = <0x1000 0xffd>; + msi-controller; + }; + + v2m2: v2m@2 { + compatible = "arm,gic-v2m-frame"; + reg = <0x2000 0xffd>; + msi-controller; + }; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0xb120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <24000000>; + + frame@b120000 { + reg = <0xb121000 0x1000>, + <0xb122000 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@b123000 { + reg = <0xb123000 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b124000 { + reg = <0xb124000 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0xb125000 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0xb126000 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0xb127000 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0xb128000 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + };
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 316
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+ }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <24000000>;
Is this allowed in recent designs?
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 317
Quoted 2 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +2
-0+ }; +};
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 6/7] arm64: dts: Add ipq9574 SoC and AL02 board support
Quoted 7 lines · Krzysztof Kozlowski
And here
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 197
Quoted 1 line
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +1
-0+ clock-names = "xo", "iface", "core";Does not look like you tested the bindings. Please run
make dt_binding_check(seeDocumentation/devicetree/bindings/writing-schema.rstfor instructions).
Apologies, wrong template. Correct comment:
Does not look like you tested the DTS against bindings. Please run make dtbs_check (see Documentation/devicetree/bindings/writing-schema.rst for instructions).
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 6/7] arm64: dts: Add ipq9574 SoC and AL02 board support
Quoted 9 lines · Krzysztof Kozlowski
Quoted 7 lines · Krzysztof Kozlowski
And here
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 197
Quoted 1 line
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +1
-0+ clock-names = "xo", "iface", "core";Does not look like you tested the bindings. Please run
make dt_binding_check(seeDocumentation/devicetree/bindings/writing-schema.rstfor instructions).
Quoted 6 lines
Apologies, wrong template. Correct comment:
Does not look like you tested the DTS against bindings. Please run
make dtbs_check(seeDocumentation/devicetree/bindings/writing-schema.rstfor instructions).
Sure, will check
Quoted 3 lines
Best regards,
Krzysztof
Best Regards,
Devi Priya
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 6/7] arm64: dts: Add ipq9574 SoC and AL02 board support
In reply to Krzysztof KozlowskiQuoted 40 lines · Krzysztof Kozlowski
Quoted 36 lines · devi priya
From: POOVENDHAN SELVARAJ <[email protected]>
Add initial device tree support for Qualcomm IPQ9574 SoC and AL02 board
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Co-developed-by devi priya <[email protected]>Signed-off-by devi priya <[email protected]>Signed-off-by POOVENDHAN SELVARAJ <[email protected]>--- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts | 69 ++++ arch/arm64/boot/dts/qcom/ipq9574.dtsi | 318 +++++++++++++++++++ 3 files changed, 388 insertions(+)create mode 100644
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtscreate mode 100644arch/arm64/boot/dts/qcom/ipq9574.dtsiarch/arm64/boot/dts/qcom/Makefile +1
-0@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-al02-c7.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtbarch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +0
-0arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts line 1
Quoted 1 line
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +1
-0@@ -0,0 +1,69 @@ +// SPDX-License-Identifier: GPL-2.0-onlyNot dual licensed? Not BSD?
Quoted 15 lines
Quoted 5 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +5
-0+/* + * IPQ9574 AL02-C7 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts line 16
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +10
-0+ */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; + compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; + interrupt-parent = <&intc>;
Can this be droppeed? since it is already part of DTSI.
Quoted 217 lines
Quoted 68 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +53
-0+ + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tlmm { + emmc_pins: emmc-state { + emmc-clk-pins { + pins = "gpio5"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + emmc-cmd-pins { + pins = "gpio4"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + emmc-data-pins { + pins = "gpio0", "gpio1", "gpio2", + "gpio3", "gpio6", "gpio7", + "gpio8", "gpio9"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + emmc-rclk-pins { + pins = "gpio10"; + function = "sdc_rclk"; + drive-strength = <8>; + bias-pull-down; + }; + }; + +};arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +9
-0@@ -0,0 +1,318 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * IPQ9574 SoC device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h>arch/arm64/boot/dts/qcom/ipq9574.dtsi line 19
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+#include <dt-bindings/clock/qcom,gcc-ipq9574.h> +#include <dt-bindings/reset/qcom,gcc-ipq9574.h> + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + bias_pll_ubi_nc_clk: bias_pll_ubi_nc_clk {No undercores in node names.
Quoted 28 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +28
-0+ compatible = "fixed-clock"; + clock-frequency = <353000000>; + #clock-cells = <0>; + }; + + pcie30_phy0_pipe_clk: pcie30_phy0_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + }; + + pcie30_phy1_pipe_clk: pcie30_phy1_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + }; + + pcie30_phy2_pipe_clk: pcie30_phy2_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + }; + + pcie30_phy3_pipe_clk: pcie30_phy3_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + };arch/arm64/boot/dts/qcom/ipq9574.dtsi line 57
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+ + usb3phy_0_cc_pipe_clk: usb3phy_0_cc_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>;That's not a property of the SoC, but board. Either entire clock or at least frequency to indicate that the board is providing the clock.
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 63
Quoted 5 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +5
-0+ #clock-cells = <0>;> + }; + + xo_board_clk: xo-board-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>;Ditto.
Quoted 77 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +77
-0+ #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x40000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,cortex-a73-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz_region: memory@4a600000 { + reg = <0x0 0x4a600000 0x0 0x400000>; + no-map; + }; + }; + + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>;arch/arm64/boot/dts/qcom/ipq9574.dtsi line 150
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+ compatible = "simple-bus"; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq9574-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 65>; + gpio-reserved-ranges = <59 1>;Hm, why reserved ranges are in SoC?
Quoted 14 lines
Quoted 4 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +4
-0+ interrupt-controller; + #interrupt-cells = <2>; + + uart2_pins: uart2-state {arch/arm64/boot/dts/qcom/ipq9574.dtsi line 164
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+ pins = "gpio34", "gpio35"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-disable; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-ipq9574"; + reg = <0x1800000 0x80000>;
Address can be padded to 8-hex-digits. Please take care of this in all nodes.
Quoted 169 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 174
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+ clocks = <&xo_board_clk>, + <&sleep_clk>, + <&bias_pll_ubi_nc_clk>, + <&pcie30_phy0_pipe_clk>, + <&pcie30_phy1_pipe_clk>, + <&pcie30_phy2_pipe_clk>, + <&pcie30_phy3_pipe_clk>, + <&usb3phy_0_cc_pipe_clk>; + clock-names = "xo", + "sleep_clk",Misaligned. Multiple other places probably as well.
Quoted 7 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +7
-0+ "bias_pll_ubi_nc_clk", + "pcie30_phy0_pipe_clk", + "pcie30_phy1_pipe_clk", + "pcie30_phy2_pipe_clk", + "pcie30_phy3_pipe_clk", + "usb3phy_0_cc_pipe_clk"; + #clock-cells = <1>;arch/arm64/boot/dts/qcom/ipq9574.dtsi line 191
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+ #reset-cells = <1>; + }; + + sdhc_1: sdhci@7804000 { + compatible = "qcom,sdhci-msm-v5"; + reg = <0x7804000 0x1000>, <0x7805000 0x1000>; + reg-names = "hc_mem", "cmdq_mem"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;Like here.
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 196
Quoted 5 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +5
-0+ interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&xo_board_clk>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>;And here
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 197
Quoted 1 line
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +1
-0+ clock-names = "xo", "iface", "core";Does not look like you tested the bindings. Please run
make dt_binding_check(seeDocumentation/devicetree/bindings/writing-schema.rstfor instructions).Quoted 109 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +109
-0+ mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + max-frequency = <384000000>; + bus-width = <8>; + non-removable; + status = "disabled"; + }; + + blsp1_uart2: serial@78b1000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b1000 0x200>; + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x0b000000 0x1000>, /* GICD */ + <0x0b002000 0x1000>, /* GICC */ + <0x0b001000 0x1000>, /* GICH */ + <0x0b004000 0x1000>; /* GICV */ + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + ranges = <0 0x0b00c000 0x3000>; + + v2m0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + reg = <0x0 0xffd>; + msi-controller; + }; + + v2m1: v2m@1 { + compatible = "arm,gic-v2m-frame"; + reg = <0x1000 0xffd>; + msi-controller; + }; + + v2m2: v2m@2 { + compatible = "arm,gic-v2m-frame"; + reg = <0x2000 0xffd>; + msi-controller; + }; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0xb120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <24000000>; + + frame@b120000 { + reg = <0xb121000 0x1000>, + <0xb122000 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@b123000 { + reg = <0xb123000 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b124000 { + reg = <0xb124000 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0xb125000 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0xb126000 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0xb127000 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0xb128000 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + };arch/arm64/boot/dts/qcom/ipq9574.dtsi line 316
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+ }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <24000000>;Is this allowed in recent designs?
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 317
Quoted 2 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +2
-0+ }; +};Best regards,
Krzysztof
Re: [PATCH 6/7] arm64: dts: Add ipq9574 SoC and AL02 board support
Quoted 51 lines · Kathiravan Thirumoorthy
Quoted 49 lines · Krzysztof Kozlowski
Quoted 36 lines · devi priya
From: POOVENDHAN SELVARAJ <[email protected]>
Add initial device tree support for Qualcomm IPQ9574 SoC and AL02 board
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Co-developed-by devi priya <[email protected]>Signed-off-by devi priya <[email protected]>Signed-off-by POOVENDHAN SELVARAJ <[email protected]>---
arch/arm64/boot/dts/qcom/Makefile | 1 +arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts| 69 ++++ arch/arm64/boot/dts/qcom/ipq9574.dtsi | 318 +++++++++++++++++++3 files changed, 388 insertions(+)create mode 100644
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtscreate mode 100644arch/arm64/boot/dts/qcom/ipq9574.dtsiarch/arm64/boot/dts/qcom/Makefile +0
-0@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtbdtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-al02-c7.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +0
-0arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts line 1
Quoted 1 line
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +1
-0@@ -0,0 +1,69 @@ +// SPDX-License-Identifier: GPL-2.0-onlyNot dual licensed? Not BSD?
Quoted 9 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +5
-0+/* + * IPQ9574 AL02-C7 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rightsreserved.
+ */arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +2
-0+ +/dts-v1/;
Quoted 8 lines
Quoted 7 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts line 16
Quoted 7 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +7
-0+ +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; + compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; + interrupt-parent = <&intc>;Can this be droppeed? since it is already part of DTSI.
Sure okay
Quoted 219 lines
Quoted 219 lines
Quoted 69 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +53
-0+ + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tlmm { + emmc_pins: emmc-state { + emmc-clk-pins { + pins = "gpio5"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + emmc-cmd-pins { + pins = "gpio4"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + emmc-data-pins { + pins = "gpio0", "gpio1", "gpio2", + "gpio3", "gpio6", "gpio7", + "gpio8", "gpio9"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + emmc-rclk-pins { + pins = "gpio10"; + function = "sdc_rclk"; + drive-strength = <8>; + bias-pull-down; + }; + }; + +};arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +6
-0@@ -0,0 +1,318 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * IPQ9574 SoC device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rightsreserved.
+ */arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +2
-0+ +#include <dt-bindings/interrupt-controller/arm-gic.h>arch/arm64/boot/dts/qcom/ipq9574.dtsi line 19
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+#include <dt-bindings/clock/qcom,gcc-ipq9574.h> +#include <dt-bindings/reset/qcom,gcc-ipq9574.h> + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + bias_pll_ubi_nc_clk: bias_pll_ubi_nc_clk {No undercores in node names.
Quoted 28 lines
+ compatible = "fixed-clock";
+ clock-frequency = <353000000>;
+ #clock-cells = <0>;
+ };arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +24
-0+ + pcie30_phy0_pipe_clk: pcie30_phy0_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + }; + + pcie30_phy1_pipe_clk: pcie30_phy1_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + }; + + pcie30_phy2_pipe_clk: pcie30_phy2_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + }; + + pcie30_phy3_pipe_clk: pcie30_phy3_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + };arch/arm64/boot/dts/qcom/ipq9574.dtsi line 57
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+ + usb3phy_0_cc_pipe_clk: usb3phy_0_cc_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>;That's not a property of the SoC, but board. Either entire clock or at least frequency to indicate that the board is providing the clock.
Quoted 5 lines
+ #clock-cells = <0>;> + };
+
+xo_board_clk: xo-board-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;Ditto.
Quoted 78 lines
+ #clock-cells = <0>;
+ };
+ };arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +52
-0+ + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x40000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,cortex-a73-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_HIGH)>;
+ };arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +21
-0+ + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz_region: memory@4a600000 { + reg = <0x0 0x4a600000 0x0 0x400000>; + no-map; + }; + }; + + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>;arch/arm64/boot/dts/qcom/ipq9574.dtsi line 150
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+ compatible = "simple-bus"; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq9574-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 65>; + gpio-reserved-ranges = <59 1>;Hm, why reserved ranges are in SoC?
Quoted 15 lines
Quoted 6 lines
Quoted 6 lines
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+uart2_pins: uart2-state {
+ pins = "gpio34", "gpio35";
+ function = "blsp2_uart";Quoted 8 lines
Quoted 8 lines
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ gcc: clock-controller@1800000 {
+ compatible = "qcom,gcc-ipq9574";
+ reg = <0x18000000x80000>;Address can be padded to 8-hex-digits. Please take care of this in all nodes.
Sure, will do
Quoted 168 lines
Quoted 168 lines
Quoted 10 lines
+ clocks = <
&xo_board_clk>,
+ <&sleep_clk>,
+ <&bias_pll_ubi_nc_clk>,
+ <&pcie30_phy0_pipe_clk>,
+ <&pcie30_phy1_pipe_clk>,
+ <&pcie30_phy2_pipe_clk>,
+ <&pcie30_phy3_pipe_clk>,
+ <&usb3phy_0_cc_pipe_clk>;
+ clock-names = "xo",
+ "sleep_clk",Misaligned. Multiple other places probably as well.
Quoted 9 lines
+ "
bias_pll_ubi_nc_clk",
+ "pcie30_phy0_pipe_clk",
+ "pcie30_phy1_pipe_clk",
+ "pcie30_phy2_pipe_clk",
+ "pcie30_phy3_pipe_clk",
+ "usb3phy_0_cc_pipe_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };arch/arm64/boot/dts/qcom/ipq9574.dtsi line 191
Quoted 8 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +8
-0+ + sdhc_1: sdhci@7804000 { + compatible = "qcom,sdhci-msm-v5"; + reg = <0x7804000 0x1000>, <0x7805000 0x1000>; + reg-names = "hc_mem", "cmdq_mem"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;Like here.
Quoted 5 lines
+ interrupt-names = "
hc_irq", "pwr_irq"; +
+ clocks = <&xo_board_clk>,
+ <&gccGCC_SDCC1_AHB_CLK>, + <&gccGCC_SDCC1_APPS_CLK>;And here
Quoted 1 line
+ clock-names = "xo", "iface", "core";
Does not look like you tested the bindings. Please run
make dt_binding_check(seeDocumentation/devicetree/bindings/writing-schema.rstfor instructions).Quoted 115 lines
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ max-frequency = <384000000>;
+ bus-width = <8>;
+ non-removable;
+ status = "disabled";
+ };arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +106
-0+ + blsp1_uart2: serial@78b1000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b1000 0x200>; + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x0b000000 0x1000>, /* GICD */ + <0x0b002000 0x1000>, /* GICC */ + <0x0b001000 0x1000>, /* GICH */ + <0x0b004000 0x1000>; /* GICV */ + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + ranges = <0 0x0b00c000 0x3000>; + + v2m0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + reg = <0x0 0xffd>; + msi-controller; + }; + + v2m1: v2m@1 { + compatible = "arm,gic-v2m-frame"; + reg = <0x1000 0xffd>; + msi-controller; + }; + + v2m2: v2m@2 { + compatible = "arm,gic-v2m-frame"; + reg = <0x2000 0xffd>; + msi-controller; + }; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0xb120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <24000000>; + + frame@b120000 { + reg = <0xb121000 0x1000>, + <0xb122000 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@b123000 { + reg = <0xb123000 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b124000 { + reg = <0xb124000 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0xb125000 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0xb126000 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0xb127000 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0xb128000 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) |Quoted 8 lines
IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI3 (GIC_CPU_MASK_SIMPLE(4)|IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI4 (GIC_CPU_MASK_SIMPLE(4)|IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI1 (GIC_CPU_MASK_SIMPLE(4)|IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <24000000>;Is this allowed in recent designs?
Quoted 5 lines
Quoted 5 lines
Quoted 2 lines
+ };
+};Best regards,
Krzysztof
Best Regards,
Devi Priya
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 6/7] arm64: dts: Add ipq9574 SoC and AL02 board support
In reply to Krzysztof KozlowskiQuoted 32 lines · Krzysztof Kozlowski
Quoted 31 lines · devi priya
From: POOVENDHAN SELVARAJ <[email protected]>
Add initial device tree support for Qualcomm IPQ9574 SoC and AL02 board
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Co-developed-by devi priya <[email protected]>Signed-off-by devi priya <[email protected]>Signed-off-by POOVENDHAN SELVARAJ <[email protected]>--- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts | 69 ++++ arch/arm64/boot/dts/qcom/ipq9574.dtsi | 318 +++++++++++++++++++ 3 files changed, 388 insertions(+)create mode 100644
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtscreate mode 100644arch/arm64/boot/dts/qcom/ipq9574.dtsiarch/arm64/boot/dts/qcom/Makefile +1
-0@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-al02-c7.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtbarch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts +0
-0
Quoted 8 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts line 1
Quoted 6 lines
new file mode 100644
index 000000000000..ae3c32f3e16aarch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +1
-0@@ -0,0 +1,69 @@ +// SPDX-License-Identifier: GPL-2.0-onlyNot dual licensed? Not BSD?
Okay, will add dual license
Quoted 88 lines
Quoted 88 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +68
-0+/* + * IPQ9574 AL02-C7 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; + compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; + interrupt-parent = <&intc>; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tlmm { + emmc_pins: emmc-state { + emmc-clk-pins { + pins = "gpio5"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + emmc-cmd-pins { + pins = "gpio4"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + emmc-data-pins { + pins = "gpio0", "gpio1", "gpio2", + "gpio3", "gpio6", "gpio7", + "gpio8", "gpio9"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + emmc-rclk-pins { + pins = "gpio10"; + function = "sdc_rclk"; + drive-strength = <8>; + bias-pull-down; + }; + }; + +};arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +13
-0@@ -0,0 +1,318 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * IPQ9574 SoC device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-ipq9574.h> +#include <dt-bindings/reset/qcom,gcc-ipq9574.h> + +/ {
Quoted 8 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 19
Quoted 6 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +6
-0+ interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + bias_pll_ubi_nc_clk: bias_pll_ubi_nc_clk {No undercores in node names.
Okay
Quoted 34 lines
Quoted 34 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +33
-0+ compatible = "fixed-clock"; + clock-frequency = <353000000>; + #clock-cells = <0>; + }; + + pcie30_phy0_pipe_clk: pcie30_phy0_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + }; + + pcie30_phy1_pipe_clk: pcie30_phy1_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + }; + + pcie30_phy2_pipe_clk: pcie30_phy2_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + }; + + pcie30_phy3_pipe_clk: pcie30_phy3_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + #clock-cells = <0>; + }; + + usb3phy_0_cc_pipe_clk: usb3phy_0_cc_pipe_clk { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + #clock-cells = <0>;
Quoted 8 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 57
Quoted 5 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +5
-0+ }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>;That's not a property of the SoC, but board. Either entire clock or at least frequency to indicate that the board is providing the clock.
Sure, will move it to board dts
Quoted 8 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 63
Quoted 6 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +5
-0+ #clock-cells = <0>;> + }; + + xo_board_clk: xo-board-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>;Ditto.
Okay
Quoted 82 lines
Quoted 82 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +81
-0+ #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x40000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,cortex-a73-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz_region: memory@4a600000 { + reg = <0x0 0x4a600000 0x0 0x400000>; + no-map; + }; + }; + + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq9574-tlmm";
Quoted 8 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 150
Quoted 6 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +6
-0+ reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 65>; + gpio-reserved-ranges = <59 1>;Hm, why reserved ranges are in SoC?
As the gpio is forbidden on all ipq9574 boards, we have added it in SoC
Quoted 19 lines
Quoted 19 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +18
-0+ interrupt-controller; + #interrupt-cells = <2>; + + uart2_pins: uart2-state { + pins = "gpio34", "gpio35"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-disable; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-ipq9574"; + reg = <0x1800000 0x80000>; + clocks = <&xo_board_clk>, + <&sleep_clk>, + <&bias_pll_ubi_nc_clk>, + <&pcie30_phy0_pipe_clk>,
Quoted 8 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 174
Quoted 6 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +6
-0+ <&pcie30_phy1_pipe_clk>, + <&pcie30_phy2_pipe_clk>, + <&pcie30_phy3_pipe_clk>, + <&usb3phy_0_cc_pipe_clk>; + clock-names = "xo", + "sleep_clk",Misaligned. Multiple other places probably as well.
Sure, will do
Quoted 12 lines
Quoted 12 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +11
-0+ "bias_pll_ubi_nc_clk", + "pcie30_phy0_pipe_clk", + "pcie30_phy1_pipe_clk", + "pcie30_phy2_pipe_clk", + "pcie30_phy3_pipe_clk", + "usb3phy_0_cc_pipe_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + sdhc_1: sdhci@7804000 {
Quoted 8 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 191
Quoted 6 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +6
-0+ compatible = "qcom,sdhci-msm-v5"; + reg = <0x7804000 0x1000>, <0x7805000 0x1000>; + reg-names = "hc_mem", "cmdq_mem"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;Like here.
Okay
Quoted 8 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 196
Quoted 6 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +5
-0+ interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&xo_board_clk>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>;And here
Okay
Quoted 6 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 197
Quoted 2 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +1
-0+ clock-names = "xo", "iface", "core";Does not look like you tested the bindings. Please run
make dt_binding_check(seeDocumentation/devicetree/bindings/writing-schema.rstfor instructions).
Sure, will do
Quoted 114 lines
Quoted 114 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +113
-0+ mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + max-frequency = <384000000>; + bus-width = <8>; + non-removable; + status = "disabled"; + }; + + blsp1_uart2: serial@78b1000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b1000 0x200>; + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x0b000000 0x1000>, /* GICD */ + <0x0b002000 0x1000>, /* GICC */ + <0x0b001000 0x1000>, /* GICH */ + <0x0b004000 0x1000>; /* GICV */ + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + ranges = <0 0x0b00c000 0x3000>; + + v2m0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + reg = <0x0 0xffd>; + msi-controller; + }; + + v2m1: v2m@1 { + compatible = "arm,gic-v2m-frame"; + reg = <0x1000 0xffd>; + msi-controller; + }; + + v2m2: v2m@2 { + compatible = "arm,gic-v2m-frame"; + reg = <0x2000 0xffd>; + msi-controller; + }; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0xb120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <24000000>; + + frame@b120000 { + reg = <0xb121000 0x1000>, + <0xb122000 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@b123000 { + reg = <0xb123000 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b124000 { + reg = <0xb124000 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0xb125000 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0xb126000 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0xb127000 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0xb128000 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + }; + + timer {
Quoted 8 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 316
Quoted 6 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +6
-0+ compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <24000000>;Is this allowed in recent designs?
Okay, will drop
Quoted 7 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 317
Quoted 3 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +2
-0+ }; +};Best regards,
Krzysztof
Best Regards,
Devi Priya
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 6/7] arm64: dts: Add ipq9574 SoC and AL02 board support
Quoted 17 lines · Devi Priya
Quoted 9 lines
Quoted 9 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +9
-0+ + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq9574-tlmm";Quoted 8 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 150
Quoted 6 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +6
-0+ reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 65>; + gpio-reserved-ranges = <59 1>;Hm, why reserved ranges are in SoC?
Quoted 1 line
As the gpio is forbidden on all ipq9574 boards, we have added it in SoC
Why it is forbidden on all boards? I guess it depends on the firmware and this can differ, can't it?
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 6/7] arm64: dts: Add ipq9574 SoC and AL02 board support
Quoted 18 lines · Krzysztof Kozlowski
Quoted 17 lines · Devi Priya
Quoted 17 lines
Quoted 5 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +5
-0+ + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>;arch/arm64/boot/dts/qcom/ipq9574.dtsi line 150
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+ compatible = "simple-bus"; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq9574-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 65>; + gpio-reserved-ranges = <59 1>;Hm, why reserved ranges are in SoC?
Quoted 5 lines
Quoted 1 line
As the gpio is forbidden on all ipq9574 boards, we have added it in SoC
Why it is forbidden on all boards? I guess it depends on the firmware and this can differ, can't it?
This GPIO is protected and used by the TZ firmware and is forbidden on all the boards & firmware
Quoted 3 lines
Best regards,
Krzysztof
Regards,
Devi Priya
Re: [PATCH 6/7] arm64: dts: Add ipq9574 SoC and AL02 board support
Quoted 11 lines · Devi Priya
Quoted 9 lines
Quoted 5 lines
Quoted 4 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi line 150
Quoted 2 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +2
-0+ gpio-ranges = <&tlmm 0 0 65>; + gpio-reserved-ranges = <59 1>;Hm, why reserved ranges are in SoC?
As the gpio is forbidden on all ipq9574 boards, we have added it in SoC
Why it is forbidden on all boards? I guess it depends on the firmware and this can differ, can't it?
This GPIO is protected and used by the TZ firmware and is forbidden on all the boards & firmware
OK
Best regards,
Krzysztof
Re: [PATCH 6/7] arm64: dts: Add ipq9574 SoC and AL02 board support
In reply to Devi PriyaQuoted 21 lines · Devi Priya
Quoted 18 lines · Krzysztof Kozlowski
Quoted 17 lines · Devi Priya
Quoted 17 lines
Quoted 5 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +5
-0+ + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>;arch/arm64/boot/dts/qcom/ipq9574.dtsi line 150
Quoted 10 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +10
-0+ compatible = "simple-bus"; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq9574-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 65>; + gpio-reserved-ranges = <59 1>;Hm, why reserved ranges are in SoC?
Quoted 6 lines
Quoted 5 lines
Quoted 1 line
As the gpio is forbidden on all ipq9574 boards, we have added it in SoC
Why it is forbidden on all boards? I guess it depends on the firmware and this can differ, can't it?
This GPIO is protected and used by the TZ firmware and is forbidden on all the boards & firmware
If it's protected on *all* boards and *all* firmwares (for any good reason that you probably have internally), perhaps it would be better to describe it in the .c driver.. wdyt?
Konrad
Quoted 5 lines
Quoted 3 lines
Best regards,
KrzysztofRegards,
Devi Priya
Re: [PATCH 6/7] arm64: dts: Add ipq9574 SoC and AL02 board support
Quoted 26 lines · Konrad Dybcio
Quoted 23 lines · Devi Priya
Quoted 20 lines · Krzysztof Kozlowski
Quoted 18 lines · Devi Priya
Quoted 9 lines
Quoted 9 lines
arch/arm64/boot/dts/qcom/ipq9574.dtsi new file +9
-0+ + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq9574-tlmm";Quoted 8 lines
Quoted 6 lines
+ reg = <
0x010000000x300000>;
+ interrupts = <GIC_SPI208IRQ_TYPE_LEVEL_HIGH>; + gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 65>;
+ gpio-reserved-ranges = <59 1>;Hm, why reserved ranges are in SoC?
As the gpio is forbidden on all ipq9574 boards, we have added it in SoC
Quoted 8 lines
Quoted 4 lines
Quoted 3 lines
Why it is forbidden on all boards? I guess it depends on the firmware and this can differ, can't it?
This GPIO is protected and used by the TZ firmware and is forbidden on all the boards & firmware
If it's protected on *all* boards and *all* firmwares (for any good reason that you probably have internally), perhaps it would be better to describe it in the .c driver.. wdyt?
Sure, okay. Will add the gpio to reserved_gpios entry in the pinctrl driver
Quoted 6 lines
Konrad
Quoted 5 lines
Quoted 3 lines
Best regards,
KrzysztofRegards,
Devi Priya
Re: [PATCH 6/7] arm64: dts: Add ipq9574 SoC and AL02 board support
In reply to devi priyaQuoted 10 lines · devi priya
From: POOVENDHAN SELVARAJ <[email protected]>
Add initial device tree support for Qualcomm IPQ9574 SoC and AL02 board
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Co-developed-by devi priya <[email protected]>Signed-off-by devi priya <[email protected]>Signed-off-by POOVENDHAN SELVARAJ <[email protected]>
Don't use CAPITAL CASE FOR NAMES BUT Camel Case. Although different languages might have different rules, but most cases when transliterated to English (or Latin alphabet), the name Start with capital letter. The same in your case.
Quoted 3 lines
--- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts | 69 ++++
One more:
Use subject prefixes matching the subsystem (which you can get for example with git log --oneline -- DIRECTORY_OR_FILE on the directory your patch is touching).
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 6/7] arm64: dts: Add ipq9574 SoC and AL02 board support
Quoted 12 lines · Krzysztof Kozlowski
Quoted 10 lines · devi priya
From: POOVENDHAN SELVARAJ <[email protected]>
Add initial device tree support for Qualcomm IPQ9574 SoC and AL02 board
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Co-developed-by devi priya <[email protected]>Signed-off-by devi priya <[email protected]>Signed-off-by POOVENDHAN SELVARAJ <[email protected]>
Quoted 4 lines
Don't use CAPITAL CASE FOR NAMES BUT Camel Case. Although different languages might have different rules, but most cases when transliterated to English (or Latin alphabet), the name Start with capital letter. The same in your case.
Sure, okay
Quoted 5 lines
Quoted 4 lines
--- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts | 69 ++++
Quoted 9 lines
One more:
Use subject prefixes matching the subsystem (which you can get for example with
git log --oneline -- DIRECTORY_OR_FILEon the directory your patch is touching).Best regards,
Krzysztof
Best Regards,
Devi Priya
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 6/7] arm64: dts: Add ipq9574 SoC and AL02 board support
In reply to devi priyaQuoted 37 lines · devi priya
From: POOVENDHAN SELVARAJ <[email protected]>
Add initial device tree support for Qualcomm IPQ9574 SoC and AL02 board
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Co-developed-by devi priya <[email protected]>Signed-off-by devi priya <[email protected]>Signed-off-by POOVENDHAN SELVARAJ <[email protected]>--- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts | 69 ++++ arch/arm64/boot/dts/qcom/ipq9574.dtsi | 318 +++++++++++++++++++ 3 files changed, 388 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsiarch/arm64/boot/dts/qcom/Makefile +1
-0@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-al02-c7.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtbarch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +0
-0
[...]
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
Quoted 7 lines
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +3
-0+ timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_LOW)>,arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +3
-0+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
Interesting choice for the PPIs...
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
Quoted 1 line
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +1
-0+ clock-frequency = <24000000>;
Please drop this and fix the firmware. No system built within past 10 years should need it.
M.
Signature · 6 lines
Jazz is not dead. It just smells funny... _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 6/7] arm64: dts: Add ipq9574 SoC and AL02 board support
Quoted 52 lines · Marc Zyngier
Quoted 37 lines · devi priya
From: POOVENDHAN SELVARAJ <[email protected]>
Add initial device tree support for Qualcomm IPQ9574 SoC and AL02 board
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Co-developed-by devi priya <[email protected]>Signed-off-by devi priya <[email protected]>Signed-off-by POOVENDHAN SELVARAJ <[email protected]>---
arch/arm64/boot/dts/qcom/Makefile | 1 +arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts| 69 ++++ arch/arm64/boot/dts/qcom/ipq9574.dtsi | 318 +++++++++++++++++++3 files changed, 388 insertions(+)create mode 100644
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtscreate mode 100644arch/arm64/boot/dts/qcom/ipq9574.dtsiarch/arm64/boot/dts/qcom/Makefile +0
-0@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtbdtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-al02-c7.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file +0
-0[...]
Quoted 10 lines
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI2 (GIC_CPU_MASK_SIMPLE(4)|IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI3 (GIC_CPU_MASK_SIMPLE(4)|IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI4 (GIC_CPU_MASK_SIMPLE(4)|IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI1 (GIC_CPU_MASK_SIMPLE(4)|IRQ_TYPE_LEVEL_LOW)>;
Quoted 6 lines
Interesting choice for the PPIs...
Quoted 1 line
+ clock-frequency = <24000000>;
Please drop this and fix the firmware. No system built within past 10 years should need it.
Sure, will drop!
Quoted 2 lines
M.
Best Regards,
Devi Priya
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 7/7 arm64: defconfig: Enable IPQ9574 SoC base configs
In reply to devi priyaEnables clk & pinctrl related configs
--- arch/arm64/configs/defconfig | 2 ++ 1 file changed, 2 insertions(+)
arch/arm64/configs/defconfig +2 -0
@@ -545,6 +545,7 @@ CONFIG_PINCTRL_IMX93=y CONFIG_PINCTRL_MSM=y CONFIG_PINCTRL_IPQ8074=y CONFIG_PINCTRL_IPQ6018=y +CONFIG_PINCTRL_IPQ9574=y CONFIG_PINCTRL_MSM8916=y CONFIG_PINCTRL_MSM8953=y CONFIG_PINCTRL_MSM8976=y
@@ -1093,6 +1094,7 @@ CONFIG_QCOM_CLK_SMD_RPM=y CONFIG_QCOM_CLK_RPMH=y CONFIG_IPQ_GCC_6018=y CONFIG_IPQ_GCC_8074=y +CONFIG_IPQ_GCC_9574=y CONFIG_MSM_GCC_8916=y CONFIG_MSM_GCC_8994=y CONFIG_MSM_MMCC_8996=y
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH 7/7] arm64: defconfig: Enable IPQ9574 SoC base configs
Quoted 14 lines · devi priya
Enables clk & pinctrl related configs
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Signed-off-by devi priya <[email protected]>--- arch/arm64/configs/defconfig | 2 ++ 1 file changed, 2 insertions(+)arch/arm64/configs/defconfig +0
-0
arch/arm64/configs/defconfig CONFIG_PINCTRL_IMX93=y · line 548
Quoted 4 lines
arch/arm64/configs/defconfig +1
-0@@ -545,6 +545,7 @@ CONFIG_PINCTRL_IMX93=y CONFIG_PINCTRL_MSM=y CONFIG_PINCTRL_IPQ8074=y CONFIG_PINCTRL_IPQ6018=y +CONFIG_PINCTRL_IPQ9574=y
Please move this after IPQ8074, to keep it in ascending order. We can move the IPQ6018 config before IPQ8074.
Quoted 11 lines
arch/arm64/configs/defconfig +1
-0CONFIG_PINCTRL_MSM8916=y CONFIG_PINCTRL_MSM8953=y CONFIG_PINCTRL_MSM8976=y@@ -1093,6 +1094,7 @@ CONFIG_QCOM_CLK_SMD_RPM=y CONFIG_QCOM_CLK_RPMH=y CONFIG_IPQ_GCC_6018=y CONFIG_IPQ_GCC_8074=y +CONFIG_IPQ_GCC_9574=y CONFIG_MSM_GCC_8916=y CONFIG_MSM_GCC_8994=y CONFIG_MSM_MMCC_8996=y
Re: [PATCH 7/7] arm64: defconfig: Enable IPQ9574 SoC base configs
Quoted 11 lines · Kathiravan Thirumoorthy
Quoted 9 lines · devi priya
Enables clk & pinctrl related configs
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Signed-off-by devi priya <[email protected]>--- arch/arm64/configs/defconfig | 2 ++ 1 file changed, 2 insertions(+)
Quoted 11 lines
arch/arm64/configs/defconfig CONFIG_PINCTRL_IMX93=y · line 548
Quoted 9 lines
arch/arm64/configs/defconfig +1
-0@@ -545,6 +545,7 @@ CONFIG_PINCTRL_IMX93=y CONFIG_PINCTRL_MSM=y CONFIG_PINCTRL_IPQ8074=y CONFIG_PINCTRL_IPQ6018=y +CONFIG_PINCTRL_IPQ9574=yPlease move this after IPQ8074, to keep it in ascending order. We can move the IPQ6018 config before IPQ8074.
This must match savedefconfig order, not alphabetical.
Best regards,
Krzysztof
Re: [PATCH 7/7] arm64: defconfig: Enable IPQ9574 SoC base configs
Quoted 24 lines · Krzysztof Kozlowski
Quoted 11 lines · Kathiravan Thirumoorthy
Quoted 9 lines · devi priya
Enables clk & pinctrl related configs
Co-developed-by Anusha Rao <[email protected]>Signed-off-by Anusha Rao <[email protected]>Signed-off-by devi priya <[email protected]>--- arch/arm64/configs/defconfig | 2 ++ 1 file changed, 2 insertions(+)Quoted 11 lines
arch/arm64/configs/defconfig CONFIG_PINCTRL_IMX93=y · line 548
Quoted 9 lines
arch/arm64/configs/defconfig +1
-0@@ -545,6 +545,7 @@ CONFIG_PINCTRL_IMX93=y CONFIG_PINCTRL_MSM=y CONFIG_PINCTRL_IPQ8074=y CONFIG_PINCTRL_IPQ6018=y +CONFIG_PINCTRL_IPQ9574=yPlease move this after IPQ8074, to keep it in ascending order. We can move the IPQ6018 config before IPQ8074.
Quoted 1 line
This must match savedefconfig order, not alphabetical.
Understood!
Quoted 4 lines
Best regards,
Krzysztof
Best Regards,
Devi Priya
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel