Add jpeg enc & dec device node for MT8195
Subsystems (3)
cover Add jpeg enc & dec device node for MT8195
From: kyrie wu <[email protected]>
This series add jpeg enc and dec device node to dts file for the purpose of supporting multi hardwares jpeg enc & dec of MT8195.
This series has been tested with MT8195 Gstreamer. Encoding and decoding worked for this chip.
Patches 1 Adds jpeg encoder device node for mt8195.
Patches 2 Adds jpeg decoder device node for mt8195.
kyrie wu (2):
arm64: dts: mt8195: add jpeg encode device node
arm64: dts: mt8195: add jpeg decode device node
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 100 +++++++++++++++++++++++ 1 file changed, 100 insertions(+)
Signature · 1 line
2.18.0
PATCH 1/2 arm64: dts: mt8195: add jpeg encode device node
From: kyrie wu <[email protected]>
add mt8195 jpegenc device node
--- arch/arm64/boot/dts/mediatek/mt8195.dtsi | 40 ++++++++++++++++++++++++ 1 file changed, 40 insertions(+)
arch/arm64/boot/dts/mediatek/mt8195.dtsi +40 -0
@@ -2152,6 +2152,46 @@ #clock-cells = <1>; }; + + jpgenc-master { + compatible = "mediatek,mt8195-jpgenc"; + power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>; + iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>, + <&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>, + <&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>, + <&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>; + dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + jpgenc@1a030000 { + compatible = "mediatek,mt8195-jpgenc-hw"; + reg = <0 0x1a030000 0 0x10000>; + iommus = <&iommu_vdo M4U_PORT_L19_JPGENC_Y_RDMA>, + <&iommu_vdo M4U_PORT_L19_JPGENC_C_RDMA>, + <&iommu_vdo M4U_PORT_L19_JPGENC_Q_TABLE>, + <&iommu_vdo M4U_PORT_L19_JPGENC_BSDMA>; + interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vencsys CLK_VENC_JPGENC>; + clock-names = "jpgenc"; + power-domains = <&spm MT8195_POWER_DOMAIN_VENC>; + }; + + jpgenc@1b030000 { + compatible = "mediatek,mt8195-jpgenc-hw"; + reg = <0 0x1b030000 0 0x10000>; + iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>, + <&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>, + <&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>, + <&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vencsys_core1 CLK_VENC_CORE1_JPGENC>; + clock-names = "jpgenc"; + power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>; + }; + }; + larb20: larb@1b010000 { compatible = "mediatek,mt8195-smi-larb"; reg = <0 0x1b010000 0 0x1000>;
Signature · 1 line
2.18.0
PATCH 2/2 arm64: dts: mt8195: add jpeg decode device node
In reply to Irui WangFrom: kyrie wu <[email protected]>
add mt8195 jpegdec device node
--- arch/arm64/boot/dts/mediatek/mt8195.dtsi | 60 ++++++++++++++++++++++++ 1 file changed, 60 insertions(+)
arch/arm64/boot/dts/mediatek/mt8195.dtsi +60 -0
@@ -2192,6 +2192,66 @@ }; }; + jpgdec-master { + compatible = "mediatek,mt8195-jpgdec"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>; + iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>; + dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + jpgdec@1a040000 { + compatible = "mediatek,mt8195-jpgdec-hw"; + reg = <0 0x1a040000 0 0x10000>;/* JPGDEC_C0 */ + iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>; + interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vencsys CLK_VENC_JPGDEC>; + clock-names = "jpgdec"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>; + }; + + jpgdec@1a050000 { + compatible = "mediatek,mt8195-jpgdec-hw"; + reg = <0 0x1a050000 0 0x10000>;/* JPGDEC_C1 */ + iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>, + <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>; + interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vencsys CLK_VENC_JPGDEC_C1>; + clock-names = "jpgdec"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>; + }; + + jpgdec@1b040000 { + compatible = "mediatek,mt8195-jpgdec-hw"; + reg = <0 0x1b040000 0 0x10000>;/* JPGDEC_C2 */ + iommus = <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA0>, + <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA0>, + <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA1>, + <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA1>, + <&iommu_vpp M4U_PORT_L20_JPGDEC_BUFF_OFFSET1>, + <&iommu_vpp M4U_PORT_L20_JPGDEC_BUFF_OFFSET0>; + interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vencsys_core1 CLK_VENC_CORE1_JPGDEC>; + clock-names = "jpgdec"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDEC2>; + }; + }; + larb20: larb@1b010000 { compatible = "mediatek,mt8195-smi-larb"; reg = <0 0x1b010000 0 0x1000>;
Signature · 1 line
2.18.0
Applied, thanks!
Quoted 20 lines · Irui Wang
From: kyrie wu <[email protected]>
This series add jpeg enc and dec device node to dts file for the purpose of supporting multi hardwares jpeg enc & dec of MT8195.
This series has been tested with MT8195 Gstreamer. Encoding and decoding worked for this chip.
Patches 1 Adds jpeg encoder device node for mt8195.
Patches 2 Adds jpeg decoder device node for mt8195.
kyrie wu (2):
arm64: dts: mt8195: add jpeg encode device node
arm64: dts: mt8195: add jpeg decode device nodearch/arm64/boot/dts/mediatek/mt8195.dtsi | 100 +++++++++++++++++++++++ 1 file changed, 100 insertions(+)