Trivial: Mark some more files as target-independant
cover Trivial: Mark some more files as target-independant
Here's a collection of low-hanging fruits to mark some more files as target-independent (so that they do not have to be compiled twice, once for qemu-system-arm and once for qemu-system-aarch64).
Philippe's patches have been on the list before, but I slightly modified some of them (like fixing typos in the subject etc.). My patches are new.
Philippe Mathieu-Daudé (4):
hw/display: Move omap_lcdc.c out of target-specific source set hw/intc: Move some files out of the target-specific source set hw/tpm: Move tpm_ppi.c out of target-specific source set hw/arm: Move various units to softmmu_ss[]
Thomas Huth (3):
hw/cpu: Mark arm11 and realview mpcore as target-independent code hw/intc: Mark more interrupt-controller files as target independent hw/usb: Mark the XLNX_VERSAL-related files as target-independent
hw/arm/meson.build | 11 +++++++---- hw/cpu/meson.build | 4 ++-- hw/display/meson.build | 2 +- hw/intc/meson.build | 12 ++++++------ hw/tpm/meson.build | 4 ++-- hw/usb/meson.build | 4 ++-- 6 files changed, 20 insertions(+), 17 deletions(-)
Signature · 1 line
2.31.1
PATCH 1/7 hw/display: Move omap_lcdc.c out of target-specific source set
From: Philippe Mathieu-Daudé <[email protected]>
While only used by the ARM targets, this device can be built once for all.
Message-Id: <[email protected]>
--- hw/display/meson.build | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
hw/display/meson.build +1 -1
@@ -111,7 +111,7 @@ if config_all_devices.has_key('CONFIG_VIRTIO_VGA') hw_display_modules += {'virtio-vga-gl': virtio_vga_gl_ss} endif -specific_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_lcdc.c')) +softmmu_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_lcdc.c')) softmmu_ss.add(when: 'CONFIG_ALL', if_true: files('acpi-vga-stub.c')) modules += { 'hw-display': hw_display_modules }
Signature · 1 line
2.31.1
PATCH 2/7 hw/intc: Move some files out of the target-specific source set
In reply to Thomas HuthFrom: Philippe Mathieu-Daudé <[email protected]>
The Goldfish interrupt controller is not target specific.
While the Exynos interrupt combiner is only used by the ARM targets, we can build this device once for all.
Message-Id: <[email protected]>
--- hw/intc/meson.build | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
hw/intc/meson.build +2 -2
@@ -13,6 +13,8 @@ softmmu_ss.add(when: 'CONFIG_ARM_GICV3_TCG', if_true: files( 'arm_gicv3_redist.c', )) softmmu_ss.add(when: 'CONFIG_ETRAXFS', if_true: files('etraxfs_pic.c')) +softmmu_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4210_gic.c', 'exynos4210_combiner.c')) +softmmu_ss.add(when: 'CONFIG_GOLDFISH_PIC', if_true: files('goldfish_pic.c')) softmmu_ss.add(when: 'CONFIG_HEATHROW_PIC', if_true: files('heathrow_pic.c')) softmmu_ss.add(when: 'CONFIG_I8259', if_true: files('i8259_common.c', 'i8259.c')) softmmu_ss.add(when: 'CONFIG_IMX', if_true: files('imx_avic.c', 'imx_gpcv2.c'))
@@ -33,7 +35,6 @@ specific_ss.add(when: 'CONFIG_ARM_GIC_KVM', if_true: files('arm_gic_kvm.c')) specific_ss.add(when: ['CONFIG_ARM_GIC_KVM', 'TARGET_AARCH64'], if_true: files('arm_gicv3_kvm.c', 'arm_gicv3_its_kvm.c')) specific_ss.add(when: 'CONFIG_ARM_V7M', if_true: files('armv7m_nvic.c')) specific_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_vic.c')) -specific_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4210_gic.c', 'exynos4210_combiner.c')) specific_ss.add(when: 'CONFIG_GRLIB', if_true: files('grlib_irqmp.c')) specific_ss.add(when: 'CONFIG_IOAPIC', if_true: files('ioapic.c')) specific_ss.add(when: 'CONFIG_LOONGSON_LIOINTC', if_true: files('loongson_liointc.c'))
@@ -60,7 +61,6 @@ specific_ss.add(when: 'CONFIG_PSERIES', if_true: files('xics_spapr.c', 'spapr_xi specific_ss.add(when: 'CONFIG_XIVE', if_true: files('xive.c')) specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_XIVE'], if_true: files('spapr_xive_kvm.c')) -specific_ss.add(when: 'CONFIG_GOLDFISH_PIC', if_true: files('goldfish_pic.c')) specific_ss.add(when: 'CONFIG_M68K_IRQC', if_true: files('m68k_irqc.c')) specific_ss.add(when: 'CONFIG_NIOS2_VIC', if_true: files('nios2_vic.c')) specific_ss.add(when: 'CONFIG_LOONGARCH_IPI', if_true: files('loongarch_ipi.c'))
Signature · 1 line
2.31.1
PATCH 3/7 hw/tpm: Move tpm_ppi.c out of target-specific source set
In reply to Thomas HuthFrom: Philippe Mathieu-Daudé <[email protected]>
The TPM Physical Presence Interface is not target specific. Build this file once for all targets.
Message-Id: <[email protected]>
--- hw/tpm/meson.build | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
hw/tpm/meson.build +2 -2
@@ -2,7 +2,7 @@ softmmu_ss.add(when: 'CONFIG_TPM_TIS', if_true: files('tpm_tis_common.c')) softmmu_ss.add(when: 'CONFIG_TPM_TIS_ISA', if_true: files('tpm_tis_isa.c')) softmmu_ss.add(when: 'CONFIG_TPM_TIS_SYSBUS', if_true: files('tpm_tis_sysbus.c')) softmmu_ss.add(when: 'CONFIG_TPM_CRB', if_true: files('tpm_crb.c')) +softmmu_ss.add(when: 'CONFIG_TPM_TIS', if_true: files('tpm_ppi.c')) +softmmu_ss.add(when: 'CONFIG_TPM_CRB', if_true: files('tpm_ppi.c')) -specific_ss.add(when: ['CONFIG_SOFTMMU', 'CONFIG_TPM_TIS'], if_true: files('tpm_ppi.c')) -specific_ss.add(when: ['CONFIG_SOFTMMU', 'CONFIG_TPM_CRB'], if_true: files('tpm_ppi.c')) specific_ss.add(when: 'CONFIG_TPM_SPAPR', if_true: files('tpm_spapr.c'))
Signature · 1 line
2.31.1
PATCH 4/7 hw/arm: Move various units to softmmu_ss[]
In reply to Thomas HuthFrom: Philippe Mathieu-Daudé <[email protected]>
arm_ss[] units are built twice: once for 32-bit word size and once for 64-bit. The following units don't require any word size knowledge and can be moved to softmmu_ss[] (where they are built once):
- smmu-common.c
- exynos4_boards.c
- bcm2835_peripherals.c
- tosa.c
Message-Id: <[email protected]>
--- hw/arm/meson.build | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
hw/arm/meson.build +7 -4
@@ -3,7 +3,6 @@ arm_ss.add(files('boot.c'), fdt) arm_ss.add(when: 'CONFIG_ARM_VIRT', if_true: files('virt.c')) arm_ss.add(when: 'CONFIG_ACPI', if_true: files('virt-acpi-build.c')) arm_ss.add(when: 'CONFIG_DIGIC', if_true: files('digic_boards.c')) -arm_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4_boards.c')) arm_ss.add(when: 'CONFIG_EMCRAFT_SF2', if_true: files('msf2-som.c')) arm_ss.add(when: 'CONFIG_HIGHBANK', if_true: files('highbank.c')) arm_ss.add(when: 'CONFIG_INTEGRATOR', if_true: files('integratorcp.c'))
@@ -18,7 +17,6 @@ arm_ss.add(when: 'CONFIG_SX1', if_true: files('omap_sx1.c')) arm_ss.add(when: 'CONFIG_CHEETAH', if_true: files('palm.c')) arm_ss.add(when: 'CONFIG_GUMSTIX', if_true: files('gumstix.c')) arm_ss.add(when: 'CONFIG_SPITZ', if_true: files('spitz.c')) -arm_ss.add(when: 'CONFIG_TOSA', if_true: files('tosa.c')) arm_ss.add(when: 'CONFIG_Z2', if_true: files('z2.c')) arm_ss.add(when: 'CONFIG_REALVIEW', if_true: files('realview.c')) arm_ss.add(when: 'CONFIG_SBSA_REF', if_true: files('sbsa-ref.c'))
@@ -38,7 +36,7 @@ arm_ss.add(when: 'CONFIG_OMAP', if_true: files('omap1.c', 'omap2.c')) arm_ss.add(when: 'CONFIG_STRONGARM', if_true: files('strongarm.c')) arm_ss.add(when: 'CONFIG_ALLWINNER_A10', if_true: files('allwinner-a10.c', 'cubieboard.c')) arm_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3.c', 'orangepi.c')) -arm_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_peripherals.c', 'bcm2836.c', 'raspi.c')) +arm_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2836.c', 'raspi.c')) arm_ss.add(when: 'CONFIG_STM32F100_SOC', if_true: files('stm32f100_soc.c')) arm_ss.add(when: 'CONFIG_STM32F205_SOC', if_true: files('stm32f205_soc.c')) arm_ss.add(when: 'CONFIG_STM32F405_SOC', if_true: files('stm32f405_soc.c'))
@@ -59,8 +57,13 @@ arm_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-soc.c')) arm_ss.add(when: 'CONFIG_MUSCA', if_true: files('musca.c')) arm_ss.add(when: 'CONFIG_ARMSSE', if_true: files('armsse.c')) arm_ss.add(when: 'CONFIG_FSL_IMX7', if_true: files('fsl-imx7.c', 'mcimx7d-sabre.c')) -arm_ss.add(when: 'CONFIG_ARM_SMMUV3', if_true: files('smmu-common.c', 'smmuv3.c')) +arm_ss.add(when: 'CONFIG_ARM_SMMUV3', if_true: files('smmuv3.c')) arm_ss.add(when: 'CONFIG_FSL_IMX6UL', if_true: files('fsl-imx6ul.c', 'mcimx6ul-evk.c')) arm_ss.add(when: 'CONFIG_NRF51_SOC', if_true: files('nrf51_soc.c')) +softmmu_ss.add(when: 'CONFIG_ARM_SMMUV3', if_true: files('smmu-common.c')) +softmmu_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4_boards.c')) +softmmu_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_peripherals.c')) +softmmu_ss.add(when: 'CONFIG_TOSA', if_true: files('tosa.c')) + hw_arch += {'arm': arm_ss}
Signature · 1 line
2.31.1
PATCH 5/7 hw/cpu: Mark arm11 and realview mpcore as target-independent code
In reply to Thomas HuthSeems like there is nothing target-specific in here, so these files can be moved to softmmu_ss to avoid that they get compiled twice (once for qemu-system-arm and once for qemu-system-aarch64).
--- hw/cpu/meson.build | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
hw/cpu/meson.build +2 -2
@@ -1,6 +1,6 @@ softmmu_ss.add(files('core.c', 'cluster.c')) -specific_ss.add(when: 'CONFIG_ARM11MPCORE', if_true: files('arm11mpcore.c')) -specific_ss.add(when: 'CONFIG_REALVIEW', if_true: files('realview_mpcore.c')) +softmmu_ss.add(when: 'CONFIG_ARM11MPCORE', if_true: files('arm11mpcore.c')) +softmmu_ss.add(when: 'CONFIG_REALVIEW', if_true: files('realview_mpcore.c')) specific_ss.add(when: 'CONFIG_A9MPCORE', if_true: files('a9mpcore.c')) specific_ss.add(when: 'CONFIG_A15MPCORE', if_true: files('a15mpcore.c'))
Signature · 1 line
2.31.1
PATCH 6/7 hw/intc: Mark more interrupt-controller files as target independent
In reply to Thomas HuthSeems like there is also nothing target-specific in here, so these files can be moved to softmmu_ss to avoid that they get compiled twice (once for qemu-system-arm and once for qemu-system-aarch64).
--- hw/intc/meson.build | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
hw/intc/meson.build +4 -4
@@ -12,6 +12,8 @@ softmmu_ss.add(when: 'CONFIG_ARM_GICV3_TCG', if_true: files( 'arm_gicv3_its.c', 'arm_gicv3_redist.c', )) +softmmu_ss.add(when: 'CONFIG_ALLWINNER_A10_PIC', if_true: files('allwinner-a10-pic.c')) +softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_vic.c')) softmmu_ss.add(when: 'CONFIG_ETRAXFS', if_true: files('etraxfs_pic.c')) softmmu_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4210_gic.c', 'exynos4210_combiner.c')) softmmu_ss.add(when: 'CONFIG_GOLDFISH_PIC', if_true: files('goldfish_pic.c'))
@@ -19,33 +21,31 @@ softmmu_ss.add(when: 'CONFIG_HEATHROW_PIC', if_true: files('heathrow_pic.c')) softmmu_ss.add(when: 'CONFIG_I8259', if_true: files('i8259_common.c', 'i8259.c')) softmmu_ss.add(when: 'CONFIG_IMX', if_true: files('imx_avic.c', 'imx_gpcv2.c')) softmmu_ss.add(when: 'CONFIG_IOAPIC', if_true: files('ioapic_common.c')) +softmmu_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_intc.c')) softmmu_ss.add(when: 'CONFIG_OPENPIC', if_true: files('openpic.c')) softmmu_ss.add(when: 'CONFIG_PL190', if_true: files('pl190.c')) +softmmu_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_ic.c', 'bcm2836_control.c')) softmmu_ss.add(when: 'CONFIG_REALVIEW', if_true: files('realview_gic.c')) softmmu_ss.add(when: 'CONFIG_SLAVIO', if_true: files('slavio_intctl.c')) softmmu_ss.add(when: 'CONFIG_XILINX', if_true: files('xilinx_intc.c')) softmmu_ss.add(when: 'CONFIG_XLNX_ZYNQMP', if_true: files('xlnx-zynqmp-ipi.c')) softmmu_ss.add(when: 'CONFIG_XLNX_ZYNQMP_PMU', if_true: files('xlnx-pmu-iomod-intc.c')) -specific_ss.add(when: 'CONFIG_ALLWINNER_A10_PIC', if_true: files('allwinner-a10-pic.c')) specific_ss.add(when: 'CONFIG_APIC', if_true: files('apic.c', 'apic_common.c')) specific_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif_common.c')) specific_ss.add(when: 'CONFIG_ARM_GICV3_TCG', if_true: files('arm_gicv3_cpuif.c')) specific_ss.add(when: 'CONFIG_ARM_GIC_KVM', if_true: files('arm_gic_kvm.c')) specific_ss.add(when: ['CONFIG_ARM_GIC_KVM', 'TARGET_AARCH64'], if_true: files('arm_gicv3_kvm.c', 'arm_gicv3_its_kvm.c')) specific_ss.add(when: 'CONFIG_ARM_V7M', if_true: files('armv7m_nvic.c')) -specific_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_vic.c')) specific_ss.add(when: 'CONFIG_GRLIB', if_true: files('grlib_irqmp.c')) specific_ss.add(when: 'CONFIG_IOAPIC', if_true: files('ioapic.c')) specific_ss.add(when: 'CONFIG_LOONGSON_LIOINTC', if_true: files('loongson_liointc.c')) specific_ss.add(when: 'CONFIG_MIPS_CPS', if_true: files('mips_gic.c')) -specific_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_intc.c')) specific_ss.add(when: 'CONFIG_OMPIC', if_true: files('ompic.c')) specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_OPENPIC'], if_true: files('openpic_kvm.c')) specific_ss.add(when: 'CONFIG_POWERNV', if_true: files('xics_pnv.c', 'pnv_xive.c', 'pnv_xive2.c')) specific_ss.add(when: 'CONFIG_PPC_UIC', if_true: files('ppc-uic.c')) -specific_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_ic.c', 'bcm2836_control.c')) specific_ss.add(when: 'CONFIG_RX_ICU', if_true: files('rx_icu.c')) specific_ss.add(when: 'CONFIG_S390_FLIC', if_true: files('s390_flic.c')) specific_ss.add(when: 'CONFIG_S390_FLIC_KVM', if_true: files('s390_flic_kvm.c'))
Signature · 1 line
2.31.1
PATCH 7/7 hw/usb: Mark the XLNX_VERSAL-related files as target-independent
In reply to Thomas HuthSeems like there is nothing target-specific in here, so these files can be moved to softmmu_ss to avoid that they get compiled twice (once for qemu-system-arm and once for qemu-system-aarch64).
--- hw/usb/meson.build | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
hw/usb/meson.build +2 -2
@@ -30,8 +30,8 @@ softmmu_ss.add(when: 'CONFIG_TUSB6010', if_true: files('tusb6010.c')) softmmu_ss.add(when: 'CONFIG_IMX', if_true: files('chipidea.c')) softmmu_ss.add(when: 'CONFIG_IMX_USBPHY', if_true: files('imx-usb-phy.c')) softmmu_ss.add(when: 'CONFIG_VT82C686', if_true: files('vt82c686-uhci-pci.c')) -specific_ss.add(when: 'CONFIG_XLNX_VERSAL', if_true: files('xlnx-versal-usb2-ctrl-regs.c')) -specific_ss.add(when: 'CONFIG_XLNX_USB_SUBSYS', if_true: files('xlnx-usb-subsystem.c')) +softmmu_ss.add(when: 'CONFIG_XLNX_VERSAL', if_true: files('xlnx-versal-usb2-ctrl-regs.c')) +softmmu_ss.add(when: 'CONFIG_XLNX_USB_SUBSYS', if_true: files('xlnx-usb-subsystem.c')) # emulated usb devices softmmu_ss.add(when: 'CONFIG_USB', if_true: files('dev-hub.c'))
Signature · 1 line
2.31.1
Quoted 10 lines · Thomas Huth
Philippe Mathieu-Daudé (4):
hw/display: Moveomap_lcdc.cout of target-specific source set hw/intc: Move some files out of the target-specific source set hw/tpm: Movetpm_ppi.cout of target-specific source set hw/arm: Move various units to softmmu_ss[]Thomas Huth (3):
hw/cpu: Mark arm11 and realview mpcore as target-independent code hw/intc: Mark more interrupt-controller files as target independent hw/usb: Mark the XLNX_VERSAL-related files as target-independent
r~
Le 12/01/2023 à 14:49, Thomas Huth a écrit :
Quoted 19 lines
Here's a collection of low-hanging fruits to mark some more files as target-independent (so that they do not have to be compiled twice, once for qemu-system-arm and once for qemu-system-aarch64).
Philippe's patches have been on the list before, but I slightly modified some of them (like fixing typos in the subject etc.). My patches are new.
Philippe Mathieu-Daudé (4):
hw/display: Moveomap_lcdc.cout of target-specific source set hw/intc: Move some files out of the target-specific source set hw/tpm: Movetpm_ppi.cout of target-specific source set hw/arm: Move various units to softmmu_ss[]Thomas Huth (3):
hw/cpu: Mark arm11 and realview mpcore as target-independent code hw/intc: Mark more interrupt-controller files as target independent hw/usb: Mark the XLNX_VERSAL-related files as target-independent
Quoted 8 lines
hw/arm/meson.build | 11 +++++++---- hw/cpu/meson.build | 4 ++-- hw/display/meson.build | 2 +- hw/intc/meson.build | 12 ++++++------ hw/tpm/meson.build | 4 ++-- hw/usb/meson.build | 4 ++-- 6 files changed, 20 insertions(+), 17 deletions(-)
Series applied to my trivial-patches branch.
Thanks,
Laurent