Skip to contentSkip to conversation

6.1.6-rc1 review

PATCH In review Greg Kroah-Hartman 14 participants 24 messages Jan 12, 2023 – Jan 16, 2023

Subsystems (2)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 6.1.6-rc1 review

This is the start of the stable review cycle for the 6.1.6 release. There are 10 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 14 Jan 2023 13:53:18 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.6-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 6.1.6-rc1

Frederick Lawler <[email protected]>
net: sched: disallow noqueue for qdisc classes

Linus Torvalds <[email protected]>
gcc: disable -Warray-bounds for gcc-11 too

Chuck Lever <[email protected]>
Revert "SUNRPC: Use RMW bitops in single-threaded hot paths"

Kyle Huey <[email protected]>
selftests/vm/pkeys: Add a regression test for setting PKRU through ptrace

Kyle Huey <[email protected]>
x86/fpu: Emulate XRSTOR's behavior if the xfeatures PKRU bit is not set

Kyle Huey <[email protected]>
x86/fpu: Allow PKRU to be (once again) written by ptrace.

Kyle Huey <[email protected]>
x86/fpu: Add a pkru argument to copy_uabi_to_xstate()

Kyle Huey <[email protected]>
x86/fpu: Add a pkru argument to copy_uabi_from_kernel_to_xstate().

Kyle Huey <[email protected]>
x86/fpu: Take task_struct* in copy_sigframe_from_user_to_xstate()

Helge Deller <[email protected]>
parisc: Align parisc MADV_XXX constants with all other architectures

-------------

Diffstat:

 Makefile                                     |   4 +-
 arch/parisc/include/uapi/asm/mman.h          |  29 +++---
 arch/parisc/kernel/sys_parisc.c              |  28 ++++++
 arch/parisc/kernel/syscalls/syscall.tbl      |   2 +-
 arch/x86/kernel/fpu/core.c                   |  19 ++--
 arch/x86/kernel/fpu/regset.c                 |   2 +-
 arch/x86/kernel/fpu/signal.c                 |   2 +-
 arch/x86/kernel/fpu/xstate.c                 |  52 ++++++++++-
 arch/x86/kernel/fpu/xstate.h                 |   4 +-
 fs/nfsd/nfs4proc.c                           |   7 +-
 fs/nfsd/nfs4xdr.c                            |   2 +-
 init/Kconfig                                 |   6 +-
 net/sched/sch_api.c                          |   5 +
 net/sunrpc/auth_gss/svcauth_gss.c            |   4 +-
 net/sunrpc/svc.c                             |   6 +-
 net/sunrpc/svc_xprt.c                        |   2 +-
 net/sunrpc/svcsock.c                         |   8 +-
 net/sunrpc/xprtrdma/svc_rdma_transport.c     |   2 +-
 tools/arch/parisc/include/uapi/asm/mman.h    |  12 +--
 tools/perf/bench/bench.h                     |  12 ---
 tools/testing/selftests/vm/pkey-x86.h        |  12 +++
 tools/testing/selftests/vm/protection_keys.c | 131 ++++++++++++++++++++++++++-
 22 files changed, 276 insertions(+), 75 deletions(-)
author maintainer
#1 lore raw

PATCH 1/10 parisc: Align parisc MADV_XXX constants with all other architectures

From: Helge Deller <[email protected]>

commit 71bdea6f798b425bc0003780b13e3fdecb16a010 upstream.

Adjust some MADV_XXX constants to be in sync what their values are on all other platforms. There is currently no reason to have an own numbering on parisc, but it requires workarounds in many userspace sources (e.g. glibc, qemu, ...) - which are often forgotten and thus introduce bugs and different behaviour on parisc.

A wrapper avoids an ABI breakage for existing userspace applications by translating any old values to the new ones, so this change allows us to move over all programs to the new ABI over time.

---
 arch/parisc/include/uapi/asm/mman.h       |   29 ++++++++++++++---------------
 arch/parisc/kernel/sys_parisc.c           |   28 ++++++++++++++++++++++++++++
 arch/parisc/kernel/syscalls/syscall.tbl   |    2 +-
 tools/arch/parisc/include/uapi/asm/mman.h |   12 ++++++------
 tools/perf/bench/bench.h                  |   12 ------------
 5 files changed, 49 insertions(+), 34 deletions(-)
arch/parisc/include/uapi/asm/mman.h +14 -15
@@ -49,6 +49,19 @@
 #define MADV_DONTFORK	10		/* don't inherit across fork */
 #define MADV_DOFORK	11		/* do inherit across fork */
 
+#define MADV_MERGEABLE   12		/* KSM may merge identical pages */
+#define MADV_UNMERGEABLE 13		/* KSM may not merge identical pages */
+
+#define MADV_HUGEPAGE	14		/* Worth backing with hugepages */
+#define MADV_NOHUGEPAGE 15		/* Not worth backing with hugepages */
+
+#define MADV_DONTDUMP   16		/* Explicity exclude from the core dump,
+					   overrides the coredump filter bits */
+#define MADV_DODUMP	17		/* Clear the MADV_NODUMP flag */
+
+#define MADV_WIPEONFORK 18		/* Zero memory on fork, child only */
+#define MADV_KEEPONFORK 19		/* Undo MADV_WIPEONFORK */
+
 #define MADV_COLD	20		/* deactivate these pages */
 #define MADV_PAGEOUT	21		/* reclaim these pages */
 
@@ -57,27 +70,13 @@
 
 #define MADV_DONTNEED_LOCKED	24	/* like DONTNEED, but drop locked pages too */
 
-#define MADV_MERGEABLE   65		/* KSM may merge identical pages */
-#define MADV_UNMERGEABLE 66		/* KSM may not merge identical pages */
-
-#define MADV_HUGEPAGE	67		/* Worth backing with hugepages */
-#define MADV_NOHUGEPAGE	68		/* Not worth backing with hugepages */
-
-#define MADV_DONTDUMP   69		/* Explicity exclude from the core dump,
-					   overrides the coredump filter bits */
-#define MADV_DODUMP	70		/* Clear the MADV_NODUMP flag */
-
-#define MADV_WIPEONFORK 71		/* Zero memory on fork, child only */
-#define MADV_KEEPONFORK 72		/* Undo MADV_WIPEONFORK */
-
-#define MADV_COLLAPSE	73		/* Synchronous hugepage collapse */
+#define MADV_COLLAPSE	25		/* Synchronous hugepage collapse */
 
 #define MADV_HWPOISON     100		/* poison a page for testing */
 #define MADV_SOFT_OFFLINE 101		/* soft offline page for testing */
 
 /* compatibility flags */
 #define MAP_FILE	0
-#define MAP_VARIABLE	0
 
 #define PKEY_DISABLE_ACCESS	0x1
 #define PKEY_DISABLE_WRITE	0x2
arch/parisc/kernel/sys_parisc.c +28 -0
@@ -465,3 +465,31 @@ asmlinkage long parisc_inotify_init1(int
 	flags = FIX_O_NONBLOCK(flags);
 	return sys_inotify_init1(flags);
 }
+
+/*
+ * madvise() wrapper
+ *
+ * Up to kernel v6.1 parisc has different values than all other
+ * platforms for the MADV_xxx flags listed below.
+ * To keep binary compatibility with existing userspace programs
+ * translate the former values to the new values.
+ *
+ * XXX: Remove this wrapper in year 2025 (or later)
+ */
+
+asmlinkage notrace long parisc_madvise(unsigned long start, size_t len_in, int behavior)
+{
+	switch (behavior) {
+	case 65: behavior = MADV_MERGEABLE;	break;
+	case 66: behavior = MADV_UNMERGEABLE;	break;
+	case 67: behavior = MADV_HUGEPAGE;	break;
+	case 68: behavior = MADV_NOHUGEPAGE;	break;
+	case 69: behavior = MADV_DONTDUMP;	break;
+	case 70: behavior = MADV_DODUMP;	break;
+	case 71: behavior = MADV_WIPEONFORK;	break;
+	case 72: behavior = MADV_KEEPONFORK;	break;
+	case 73: behavior = MADV_COLLAPSE;	break;
+	}
+
+	return sys_madvise(start, len_in, behavior);
+}
arch/parisc/kernel/syscalls/syscall.tbl +1 -1
@@ -131,7 +131,7 @@
 116	common	sysinfo			sys_sysinfo			compat_sys_sysinfo
 117	common	shutdown		sys_shutdown
 118	common	fsync			sys_fsync
-119	common	madvise			sys_madvise
+119	common	madvise			parisc_madvise
 120	common	clone			sys_clone_wrapper
 121	common	setdomainname		sys_setdomainname
 122	common	sendfile		sys_sendfile			compat_sys_sendfile
tools/arch/parisc/include/uapi/asm/mman.h +6 -6
@@ -1,20 +1,20 @@
 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
 #ifndef TOOLS_ARCH_PARISC_UAPI_ASM_MMAN_FIX_H
 #define TOOLS_ARCH_PARISC_UAPI_ASM_MMAN_FIX_H
-#define MADV_DODUMP	70
+#define MADV_DODUMP	17
 #define MADV_DOFORK	11
-#define MADV_DONTDUMP   69
+#define MADV_DONTDUMP   16
 #define MADV_DONTFORK	10
 #define MADV_DONTNEED   4
 #define MADV_FREE	8
-#define MADV_HUGEPAGE	67
-#define MADV_MERGEABLE   65
-#define MADV_NOHUGEPAGE	68
+#define MADV_HUGEPAGE	14
+#define MADV_MERGEABLE  12
+#define MADV_NOHUGEPAGE 15
 #define MADV_NORMAL     0
 #define MADV_RANDOM     1
 #define MADV_REMOVE	9
 #define MADV_SEQUENTIAL 2
-#define MADV_UNMERGEABLE 66
+#define MADV_UNMERGEABLE 13
 #define MADV_WILLNEED   3
 #define MAP_ANONYMOUS	0x10
 #define MAP_DENYWRITE	0x0800
tools/perf/bench/bench.h +0 -12
@@ -10,25 +10,13 @@ extern struct timeval bench__start, benc
  * The madvise transparent hugepage constants were added in glibc
  * 2.13. For compatibility with older versions of glibc, define these
  * tokens if they are not already defined.
- *
- * PA-RISC uses different madvise values from other architectures and
- * needs to be special-cased.
  */
-#ifdef __hppa__
-# ifndef MADV_HUGEPAGE
-#  define MADV_HUGEPAGE		67
-# endif
-# ifndef MADV_NOHUGEPAGE
-#  define MADV_NOHUGEPAGE	68
-# endif
-#else
 # ifndef MADV_HUGEPAGE
 #  define MADV_HUGEPAGE		14
 # endif
 # ifndef MADV_NOHUGEPAGE
 #  define MADV_NOHUGEPAGE	15
 # endif
-#endif
 
 int bench_numa(int argc, const char **argv);
 int bench_sched_messaging(int argc, const char **argv);
author maintainer
#2 lore raw

PATCH 2/10 x86/fpu: Take task_struct* in copy_sigframe_from_user_to_xstate()

In reply to Greg Kroah-Hartman

From: Kyle Huey <[email protected]>

commit 6a877d2450ace4f27c012519e5a1ae818f931983 upstream.

This will allow copy_sigframe_from_user_to_xstate() to grab the address of thread_struct's pkru value in a later patch.

---
 arch/x86/kernel/fpu/signal.c |    2 +-
 arch/x86/kernel/fpu/xstate.c |    4 ++--
 arch/x86/kernel/fpu/xstate.h |    2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)
arch/x86/kernel/fpu/signal.c +1 -1
@@ -396,7 +396,7 @@ static bool __fpu_restore_sig(void __use
 
 	fpregs = &fpu->fpstate->regs;
 	if (use_xsave() && !fx_only) {
-		if (copy_sigframe_from_user_to_xstate(fpu->fpstate, buf_fx))
+		if (copy_sigframe_from_user_to_xstate(tsk, buf_fx))
 			return false;
 	} else {
 		if (__copy_from_user(&fpregs->fxsave, buf_fx,
arch/x86/kernel/fpu/xstate.c +2 -2
@@ -1278,10 +1278,10 @@ int copy_uabi_from_kernel_to_xstate(stru
  * XSAVE[S] format and copy to the target thread. This is called from the
  * sigreturn() and rt_sigreturn() system calls.
  */
-int copy_sigframe_from_user_to_xstate(struct fpstate *fpstate,
+int copy_sigframe_from_user_to_xstate(struct task_struct *tsk,
 				      const void __user *ubuf)
 {
-	return copy_uabi_to_xstate(fpstate, NULL, ubuf);
+	return copy_uabi_to_xstate(tsk->thread.fpu.fpstate, NULL, ubuf);
 }
 
 static bool validate_independent_components(u64 mask)
arch/x86/kernel/fpu/xstate.h +1 -1
@@ -47,7 +47,7 @@ extern void __copy_xstate_to_uabi_buf(st
 extern void copy_xstate_to_uabi_buf(struct membuf to, struct task_struct *tsk,
 				    enum xstate_copy_mode mode);
 extern int copy_uabi_from_kernel_to_xstate(struct fpstate *fpstate, const void *kbuf);
-extern int copy_sigframe_from_user_to_xstate(struct fpstate *fpstate, const void __user *ubuf);
+extern int copy_sigframe_from_user_to_xstate(struct task_struct *tsk, const void __user *ubuf);
 
 
 extern void fpu__init_cpu_xstate(void);
author maintainer
#3 lore raw

PATCH 3/10 x86/fpu: Add a pkru argument to copy_uabi_from_kernel_to_xstate().

In reply to Greg Kroah-Hartman

From: Kyle Huey <[email protected]>

commit 1c813ce0305571e1b2e4cc4acca451da9e6ad18f upstream.

Both KVM (through KVM_SET_XSTATE) and ptrace (through PTRACE_SETREGSET with NT_X86_XSTATE) ultimately call copy_uabi_from_kernel_to_xstate(), but the canonical locations for the current PKRU value for KVM guests and processes in a ptrace stop are different (in the kvm_vcpu_arch and the thread_state structs respectively).

In preparation for eventually handling PKRU in copy_uabi_to_xstate, pass in a pointer to the PKRU location.

---
 arch/x86/kernel/fpu/core.c   |    2 +-
 arch/x86/kernel/fpu/regset.c |    2 +-
 arch/x86/kernel/fpu/xstate.c |    2 +-
 arch/x86/kernel/fpu/xstate.h |    2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)
arch/x86/kernel/fpu/core.c +1 -1
@@ -406,7 +406,7 @@ int fpu_copy_uabi_to_guest_fpstate(struc
 	if (ustate->xsave.header.xfeatures & ~xcr0)
 		return -EINVAL;
 
-	ret = copy_uabi_from_kernel_to_xstate(kstate, ustate);
+	ret = copy_uabi_from_kernel_to_xstate(kstate, ustate, vpkru);
 	if (ret)
 		return ret;
 
arch/x86/kernel/fpu/regset.c +1 -1
@@ -167,7 +167,7 @@ int xstateregs_set(struct task_struct *t
 	}
 
 	fpu_force_restore(fpu);
-	ret = copy_uabi_from_kernel_to_xstate(fpu->fpstate, kbuf ?: tmpbuf);
+	ret = copy_uabi_from_kernel_to_xstate(fpu->fpstate, kbuf ?: tmpbuf, &target->thread.pkru);
 
 out:
 	vfree(tmpbuf);
arch/x86/kernel/fpu/xstate.c +1 -1
@@ -1268,7 +1268,7 @@ static int copy_uabi_to_xstate(struct fp
  * Convert from a ptrace standard-format kernel buffer to kernel XSAVE[S]
  * format and copy to the target thread. Used by ptrace and KVM.
  */
-int copy_uabi_from_kernel_to_xstate(struct fpstate *fpstate, const void *kbuf)
+int copy_uabi_from_kernel_to_xstate(struct fpstate *fpstate, const void *kbuf, u32 *pkru)
 {
 	return copy_uabi_to_xstate(fpstate, kbuf, NULL);
 }
arch/x86/kernel/fpu/xstate.h +1 -1
@@ -46,7 +46,7 @@ extern void __copy_xstate_to_uabi_buf(st
 				      u32 pkru_val, enum xstate_copy_mode copy_mode);
 extern void copy_xstate_to_uabi_buf(struct membuf to, struct task_struct *tsk,
 				    enum xstate_copy_mode mode);
-extern int copy_uabi_from_kernel_to_xstate(struct fpstate *fpstate, const void *kbuf);
+extern int copy_uabi_from_kernel_to_xstate(struct fpstate *fpstate, const void *kbuf, u32 *pkru);
 extern int copy_sigframe_from_user_to_xstate(struct task_struct *tsk, const void __user *ubuf);
 
 
author maintainer
#4 lore raw

PATCH 4/10 x86/fpu: Add a pkru argument to copy_uabi_to_xstate()

In reply to Greg Kroah-Hartman

From: Kyle Huey <[email protected]>

commit 2c87767c35ee9744f666ccec869d5fe742c3de0a upstream.

In preparation for moving PKRU handling code out of fpu_copy_uabi_to_guest_fpstate() and into copy_uabi_to_xstate(), add an argument that copy_uabi_from_kernel_to_xstate() can use to pass the canonical location of the PKRU value. For copy_sigframe_from_user_to_xstate() the kernel will actually restore the PKRU value from the fpstate, but pass in the thread_struct's pkru location anyways for consistency.

---
 arch/x86/kernel/fpu/xstate.c |   16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)
arch/x86/kernel/fpu/xstate.c +13 -3
@@ -1200,8 +1200,18 @@ static int copy_from_buffer(void *dst, u
 }
 
 
+/**
+ * copy_uabi_to_xstate - Copy a UABI format buffer to the kernel xstate
+ * @fpstate:	The fpstate buffer to copy to
+ * @kbuf:	The UABI format buffer, if it comes from the kernel
+ * @ubuf:	The UABI format buffer, if it comes from userspace
+ * @pkru:	unused
+ *
+ * Converts from the UABI format into the kernel internal hardware
+ * dependent format.
+ */
 static int copy_uabi_to_xstate(struct fpstate *fpstate, const void *kbuf,
-			       const void __user *ubuf)
+			       const void __user *ubuf, u32 *pkru)
 {
 	struct xregs_state *xsave = &fpstate->regs.xsave;
 	unsigned int offset, size;
@@ -1270,7 +1280,7 @@ static int copy_uabi_to_xstate(struct fp
  */
 int copy_uabi_from_kernel_to_xstate(struct fpstate *fpstate, const void *kbuf, u32 *pkru)
 {
-	return copy_uabi_to_xstate(fpstate, kbuf, NULL);
+	return copy_uabi_to_xstate(fpstate, kbuf, NULL, pkru);
 }
 
 /*
@@ -1281,7 +1291,7 @@ int copy_uabi_from_kernel_to_xstate(stru
 int copy_sigframe_from_user_to_xstate(struct task_struct *tsk,
 				      const void __user *ubuf)
 {
-	return copy_uabi_to_xstate(tsk->thread.fpu.fpstate, NULL, ubuf);
+	return copy_uabi_to_xstate(tsk->thread.fpu.fpstate, NULL, ubuf, &tsk->thread.pkru);
 }
 
 static bool validate_independent_components(u64 mask)
author maintainer
#5 lore raw

PATCH 5/10 x86/fpu: Allow PKRU to be (once again) written by ptrace.

In reply to Greg Kroah-Hartman

From: Kyle Huey <[email protected]>

commit 4a804c4f8356393d6b5eff7600f07615d7869c13 upstream.

Move KVM's PKRU handling code in fpu_copy_uabi_to_guest_fpstate() to copy_uabi_to_xstate() so that it is shared with other APIs that write the XSTATE such as PTRACE_SETREGSET with NT_X86_XSTATE.

This restores the pre-5.14 behavior of ptrace. The regression can be seen by running gdb and executing p $pkru, set $pkru = 42, and p $pkru. On affected kernels (5.14+) the write to the PKRU register (which gdb performs through ptrace) is ignored.

[ dhansen: removed stable@ tag for now. The ABI was broken for long
enough that this is not urgent material. Let's let it stew in tip for a few weeks before it's submitted to stable because there are so many ABIs potentially affected. ]

---
 arch/x86/kernel/fpu/core.c   |   13 +------------
 arch/x86/kernel/fpu/xstate.c |   21 ++++++++++++++++++++-
 2 files changed, 21 insertions(+), 13 deletions(-)
arch/x86/kernel/fpu/core.c +1 -12
@@ -391,8 +391,6 @@ int fpu_copy_uabi_to_guest_fpstate(struc
 {
 	struct fpstate *kstate = gfpu->fpstate;
 	const union fpregs_state *ustate = buf;
-	struct pkru_state *xpkru;
-	int ret;
 
 	if (!cpu_feature_enabled(X86_FEATURE_XSAVE)) {
 		if (ustate->xsave.header.xfeatures & ~XFEATURE_MASK_FPSSE)
@@ -406,16 +404,7 @@ int fpu_copy_uabi_to_guest_fpstate(struc
 	if (ustate->xsave.header.xfeatures & ~xcr0)
 		return -EINVAL;
 
-	ret = copy_uabi_from_kernel_to_xstate(kstate, ustate, vpkru);
-	if (ret)
-		return ret;
-
-	/* Retrieve PKRU if not in init state */
-	if (kstate->regs.xsave.header.xfeatures & XFEATURE_MASK_PKRU) {
-		xpkru = get_xsave_addr(&kstate->regs.xsave, XFEATURE_PKRU);
-		*vpkru = xpkru->pkru;
-	}
-	return 0;
+	return copy_uabi_from_kernel_to_xstate(kstate, ustate, vpkru);
 }
 EXPORT_SYMBOL_GPL(fpu_copy_uabi_to_guest_fpstate);
 #endif /* CONFIG_KVM */
arch/x86/kernel/fpu/xstate.c +20 -1
@@ -1205,10 +1205,22 @@ static int copy_from_buffer(void *dst, u
  * @fpstate:	The fpstate buffer to copy to
  * @kbuf:	The UABI format buffer, if it comes from the kernel
  * @ubuf:	The UABI format buffer, if it comes from userspace
- * @pkru:	unused
+ * @pkru:	The location to write the PKRU value to
  *
  * Converts from the UABI format into the kernel internal hardware
  * dependent format.
+ *
+ * This function ultimately has three different callers with distinct PKRU
+ * behavior.
+ * 1.	When called from sigreturn the PKRU register will be restored from
+ *	@fpstate via an XRSTOR. Correctly copying the UABI format buffer to
+ *	@fpstate is sufficient to cover this case, but the caller will also
+ *	pass a pointer to the thread_struct's pkru field in @pkru and updating
+ *	it is harmless.
+ * 2.	When called from ptrace the PKRU register will be restored from the
+ *	thread_struct's pkru field. A pointer to that is passed in @pkru.
+ * 3.	When called from KVM the PKRU register will be restored from the vcpu's
+ *	pkru field. A pointer to that is passed in @pkru.
  */
 static int copy_uabi_to_xstate(struct fpstate *fpstate, const void *kbuf,
 			       const void __user *ubuf, u32 *pkru)
@@ -1260,6 +1272,13 @@ static int copy_uabi_to_xstate(struct fp
 		}
 	}
 
+	if (hdr.xfeatures & XFEATURE_MASK_PKRU) {
+		struct pkru_state *xpkru;
+
+		xpkru = __raw_xsave_addr(xsave, XFEATURE_PKRU);
+		*pkru = xpkru->pkru;
+	}
+
 	/*
 	 * The state that came in from userspace was user-state only.
 	 * Mask all the user states out of 'xfeatures':
author maintainer
#6 lore raw

PATCH 6/10 x86/fpu: Emulate XRSTORs behavior if the xfeatures PKRU bit is not set

In reply to Greg Kroah-Hartman

From: Kyle Huey <[email protected]>

commit d7e5aceace514a2b1b3ca3dc44f93f1704766ca7 upstream.

The hardware XRSTOR instruction resets the PKRU register to its hardware init value (namely 0) if the PKRU bit is not set in the xfeatures mask. Emulating that here restores the pre-5.14 behavior for PTRACE_SET_REGSET with NT_X86_XSTATE, and makes sigreturn (which still uses XRSTOR) and ptrace behave identically. KVM has never used XRSTOR and never had this behavior, so KVM opts-out of this emulation by passing a NULL pkru pointer to copy_uabi_to_xstate().

---
 arch/x86/kernel/fpu/core.c   |    8 ++++++++
 arch/x86/kernel/fpu/xstate.c |   15 ++++++++++++++-
 2 files changed, 22 insertions(+), 1 deletion(-)
arch/x86/kernel/fpu/core.c +8 -0
@@ -404,6 +404,14 @@ int fpu_copy_uabi_to_guest_fpstate(struc
 	if (ustate->xsave.header.xfeatures & ~xcr0)
 		return -EINVAL;
 
+	/*
+	 * Nullify @vpkru to preserve its current value if PKRU's bit isn't set
+	 * in the header.  KVM's odd ABI is to leave PKRU untouched in this
+	 * case (all other components are eventually re-initialized).
+	 */
+	if (!(ustate->xsave.header.xfeatures & XFEATURE_MASK_PKRU))
+		vpkru = NULL;
+
 	return copy_uabi_from_kernel_to_xstate(kstate, ustate, vpkru);
 }
 EXPORT_SYMBOL_GPL(fpu_copy_uabi_to_guest_fpstate);
arch/x86/kernel/fpu/xstate.c +14 -1
@@ -1219,8 +1219,14 @@ static int copy_from_buffer(void *dst, u
  *	it is harmless.
  * 2.	When called from ptrace the PKRU register will be restored from the
  *	thread_struct's pkru field. A pointer to that is passed in @pkru.
+ *	The kernel will restore it manually, so the XRSTOR behavior that resets
+ *	the PKRU register to the hardware init value (0) if the corresponding
+ *	xfeatures bit is not set is emulated here.
  * 3.	When called from KVM the PKRU register will be restored from the vcpu's
- *	pkru field. A pointer to that is passed in @pkru.
+ *	pkru field. A pointer to that is passed in @pkru. KVM hasn't used
+ *	XRSTOR and hasn't had the PKRU resetting behavior described above. To
+ *	preserve that KVM behavior, it passes NULL for @pkru if the xfeatures
+ *	bit is not set.
  */
 static int copy_uabi_to_xstate(struct fpstate *fpstate, const void *kbuf,
 			       const void __user *ubuf, u32 *pkru)
@@ -1277,6 +1283,13 @@ static int copy_uabi_to_xstate(struct fp
 
 		xpkru = __raw_xsave_addr(xsave, XFEATURE_PKRU);
 		*pkru = xpkru->pkru;
+	} else {
+		/*
+		 * KVM may pass NULL here to indicate that it does not need
+		 * PKRU updated.
+		 */
+		if (pkru)
+			*pkru = 0;
 	}
 
 	/*
author maintainer
#7 lore raw

PATCH 7/10 selftests/vm/pkeys: Add a regression test for setting PKRU through ptrace

In reply to Greg Kroah-Hartman

From: Kyle Huey <[email protected]>

commit 6ea25770b043c7997ab21d1ce95ba5de4d3d85d9 upstream.

This tests PTRACE_SETREGSET with NT_X86_XSTATE modifying PKRU directly and removing the PKRU bit from XSTATE_BV.

---
 tools/testing/selftests/vm/pkey-x86.h        |   12 ++
 tools/testing/selftests/vm/protection_keys.c |  131 ++++++++++++++++++++++++++-
 2 files changed, 141 insertions(+), 2 deletions(-)
tools/testing/selftests/vm/pkey-x86.h +12 -0
@@ -104,6 +104,18 @@ static inline int cpu_has_pkeys(void)
 	return 1;
 }
 
+static inline int cpu_max_xsave_size(void)
+{
+	unsigned long XSTATE_CPUID = 0xd;
+	unsigned int eax;
+	unsigned int ebx;
+	unsigned int ecx;
+	unsigned int edx;
+
+	__cpuid_count(XSTATE_CPUID, 0, eax, ebx, ecx, edx);
+	return ecx;
+}
+
 static inline u32 pkey_bit_position(int pkey)
 {
 	return pkey * PKEY_BITS_PER_PKEY;
tools/testing/selftests/vm/protection_keys.c +129 -2

153 lines not on this page · raw message

author maintainer
#8 lore raw

PATCH 8/10 Revert "SUNRPC: Use RMW bitops in single-threaded hot paths"

In reply to Greg Kroah-Hartman

From: Chuck Lever <[email protected]>

commit 7827c81f0248e3c2f40d438b020f3d222f002171 upstream.

The premise that "Once an svc thread is scheduled and executing an RPC, no other processes will touch svc_rqst::rq_flags" is false. svc_xprt_enqueue() examines the RQ_BUSY flag in scheduled nfsd threads when determining which thread to wake up next.

Found via KCSAN.

Fixes 28df0988815f ("SUNRPC: Use RMW bitops in single-threaded hot paths")
---
 fs/nfsd/nfs4proc.c                       |    7 +++----
 fs/nfsd/nfs4xdr.c                        |    2 +-
 net/sunrpc/auth_gss/svcauth_gss.c        |    4 ++--
 net/sunrpc/svc.c                         |    6 +++---
 net/sunrpc/svc_xprt.c                    |    2 +-
 net/sunrpc/svcsock.c                     |    8 ++++----
 net/sunrpc/xprtrdma/svc_rdma_transport.c |    2 +-
 7 files changed, 15 insertions(+), 16 deletions(-)
fs/nfsd/nfs4proc.c +3 -4
@@ -928,7 +928,7 @@ nfsd4_read(struct svc_rqst *rqstp, struc
 	 * the client wants us to do more in this compound:
 	 */
 	if (!nfsd4_last_compound_op(rqstp))
-		__clear_bit(RQ_SPLICE_OK, &rqstp->rq_flags);
+		clear_bit(RQ_SPLICE_OK, &rqstp->rq_flags);
 
 	/* check stateid */
 	status = nfs4_preprocess_stateid_op(rqstp, cstate, &cstate->current_fh,
@@ -2615,12 +2615,11 @@ nfsd4_proc_compound(struct svc_rqst *rqs
 	cstate->minorversion = args->minorversion;
 	fh_init(current_fh, NFS4_FHSIZE);
 	fh_init(save_fh, NFS4_FHSIZE);
-
 	/*
 	 * Don't use the deferral mechanism for NFSv4; compounds make it
 	 * too hard to avoid non-idempotency problems.
 	 */
-	__clear_bit(RQ_USEDEFERRAL, &rqstp->rq_flags);
+	clear_bit(RQ_USEDEFERRAL, &rqstp->rq_flags);
 
 	/*
 	 * According to RFC3010, this takes precedence over all other errors.
@@ -2742,7 +2741,7 @@ encode_op:
 out:
 	cstate->status = status;
 	/* Reset deferral mechanism for RPC deferrals */
-	__set_bit(RQ_USEDEFERRAL, &rqstp->rq_flags);
+	set_bit(RQ_USEDEFERRAL, &rqstp->rq_flags);
 	return rpc_success;
 }
 
fs/nfsd/nfs4xdr.c +1 -1
@@ -2464,7 +2464,7 @@ nfsd4_decode_compound(struct nfsd4_compo
 	argp->rqstp->rq_cachetype = cachethis ? RC_REPLBUFF : RC_NOCACHE;
 
 	if (readcount > 1 || max_reply > PAGE_SIZE - auth_slack)
-		__clear_bit(RQ_SPLICE_OK, &argp->rqstp->rq_flags);
+		clear_bit(RQ_SPLICE_OK, &argp->rqstp->rq_flags);
 
 	return true;
 }
net/sunrpc/auth_gss/svcauth_gss.c +2 -2
@@ -900,7 +900,7 @@ unwrap_integ_data(struct svc_rqst *rqstp
 	 * rejecting the server-computed MIC in this somewhat rare case,
 	 * do not use splice with the GSS integrity service.
 	 */
-	__clear_bit(RQ_SPLICE_OK, &rqstp->rq_flags);
+	clear_bit(RQ_SPLICE_OK, &rqstp->rq_flags);
 
 	/* Did we already verify the signature on the original pass through? */
 	if (rqstp->rq_deferred)
@@ -972,7 +972,7 @@ unwrap_priv_data(struct svc_rqst *rqstp,
 	int pad, remaining_len, offset;
 	u32 rseqno;
 
-	__clear_bit(RQ_SPLICE_OK, &rqstp->rq_flags);
+	clear_bit(RQ_SPLICE_OK, &rqstp->rq_flags);
 
 	priv_len = svc_getnl(&buf->head[0]);
 	if (rqstp->rq_deferred) {
net/sunrpc/svc.c +3 -3
@@ -1244,10 +1244,10 @@ svc_process_common(struct svc_rqst *rqst
 		goto err_short_len;
 
 	/* Will be turned off by GSS integrity and privacy services */
-	__set_bit(RQ_SPLICE_OK, &rqstp->rq_flags);
+	set_bit(RQ_SPLICE_OK, &rqstp->rq_flags);
 	/* Will be turned off only when NFSv4 Sessions are used */
-	__set_bit(RQ_USEDEFERRAL, &rqstp->rq_flags);
-	__clear_bit(RQ_DROPME, &rqstp->rq_flags);
+	set_bit(RQ_USEDEFERRAL, &rqstp->rq_flags);
+	clear_bit(RQ_DROPME, &rqstp->rq_flags);
 
 	svc_putu32(resv, rqstp->rq_xid);
 
net/sunrpc/svc_xprt.c +1 -1
@@ -1238,7 +1238,7 @@ static struct cache_deferred_req *svc_de
 	trace_svc_defer(rqstp);
 	svc_xprt_get(rqstp->rq_xprt);
 	dr->xprt = rqstp->rq_xprt;
-	__set_bit(RQ_DROPME, &rqstp->rq_flags);
+	set_bit(RQ_DROPME, &rqstp->rq_flags);
 
 	dr->handle.revisit = svc_revisit;
 	return &dr->handle;
net/sunrpc/svcsock.c +4 -4
@@ -298,9 +298,9 @@ static void svc_sock_setbufsize(struct s
 static void svc_sock_secure_port(struct svc_rqst *rqstp)
 {
 	if (svc_port_is_privileged(svc_addr(rqstp)))
-		__set_bit(RQ_SECURE, &rqstp->rq_flags);
+		set_bit(RQ_SECURE, &rqstp->rq_flags);
 	else
-		__clear_bit(RQ_SECURE, &rqstp->rq_flags);
+		clear_bit(RQ_SECURE, &rqstp->rq_flags);
 }
 
 /*
@@ -1008,9 +1008,9 @@ static int svc_tcp_recvfrom(struct svc_r
 	rqstp->rq_xprt_ctxt   = NULL;
 	rqstp->rq_prot	      = IPPROTO_TCP;
 	if (test_bit(XPT_LOCAL, &svsk->sk_xprt.xpt_flags))
-		__set_bit(RQ_LOCAL, &rqstp->rq_flags);
+		set_bit(RQ_LOCAL, &rqstp->rq_flags);
 	else
-		__clear_bit(RQ_LOCAL, &rqstp->rq_flags);
+		clear_bit(RQ_LOCAL, &rqstp->rq_flags);
 
 	p = (__be32 *)rqstp->rq_arg.head[0].iov_base;
 	calldir = p[1];
net/sunrpc/xprtrdma/svc_rdma_transport.c +1 -1
@@ -602,7 +602,7 @@ static int svc_rdma_has_wspace(struct sv
 
 static void svc_rdma_secure_port(struct svc_rqst *rqstp)
 {
-	__set_bit(RQ_SECURE, &rqstp->rq_flags);
+	set_bit(RQ_SECURE, &rqstp->rq_flags);
 }
 
 static void svc_rdma_kill_temp_xprt(struct svc_xprt *xprt)
author maintainer
#9 lore raw

PATCH 9/10 gcc: disable -Warray-bounds for gcc-11 too

In reply to Greg Kroah-Hartman

From: Linus Torvalds <[email protected]>

commit 5a41237ad1d4b62008f93163af1d9b1da90729d8 upstream.

We had already disabled this warning for gcc-12 due to bugs in the value range analysis, but it turns out we end up having some similar problems with gcc-11.3 too, so let's disable it there too.

Older gcc versions end up being increasingly less relevant, and hopefully clang and newer version of gcc (ie gcc-13) end up working reliably enough that we still get the build coverage even when we disable this for some versions.

---
 init/Kconfig |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
init/Kconfig +5 -1
@@ -892,13 +892,17 @@ config CC_IMPLICIT_FALLTHROUGH
 	default "-Wimplicit-fallthrough=5" if CC_IS_GCC && $(cc-option,-Wimplicit-fallthrough=5)
 	default "-Wimplicit-fallthrough" if CC_IS_CLANG && $(cc-option,-Wunreachable-code-fallthrough)
 
-# Currently, disable gcc-12 array-bounds globally.
+# Currently, disable gcc-11,12 array-bounds globally.
 # We may want to target only particular configurations some day.
+config GCC11_NO_ARRAY_BOUNDS
+	def_bool y
+
 config GCC12_NO_ARRAY_BOUNDS
 	def_bool y
 
 config CC_NO_ARRAY_BOUNDS
 	bool
+	default y if CC_IS_GCC && GCC_VERSION >= 110000 && GCC_VERSION < 120000 && GCC11_NO_ARRAY_BOUNDS
 	default y if CC_IS_GCC && GCC_VERSION >= 120000 && GCC_VERSION < 130000 && GCC12_NO_ARRAY_BOUNDS
 
 #
#10 lore raw

Re: [PATCH 6.1 09/10] gcc: disable -Warray-bounds for gcc-11 too

Quoted 4 lines · Greg Kroah-Hartman

From: Linus Torvalds <[email protected]>

commit 5a41237ad1d4b62008f93163af1d9b1da90729d8 upstream.

Quoted 8 lines

We had already disabled this warning for gcc-12 due to bugs in the value range analysis, but it turns out we end up having some similar problems with gcc-11.3 too, so let's disable it there too.

Older gcc versions end up being increasingly less relevant, and hopefully clang and newer version of gcc (ie gcc-13) end up working reliably enough that we still get the build coverage even when we disable this for some versions.

No, this did not happen and I sent a patch for gcc 13 long time ago (it was not applied):
https://lore.kernel.org/all/[email protected]/

So should we simply make it CC_IS_GCC && GCC_VERSION >= 110000 until this gets resolved eventually?

Quoted 34 lines
---
  init/Kconfig |    6 +++++-
  1 file changed, 5 insertions(+), 1 deletion(-)
init/Kconfig +5 -1
@@ -892,13 +892,17 @@ config CC_IMPLICIT_FALLTHROUGH
  	default "-Wimplicit-fallthrough=5" if CC_IS_GCC && $(cc-option,-Wimplicit-fallthrough=5)
  	default "-Wimplicit-fallthrough" if CC_IS_CLANG && $(cc-option,-Wunreachable-code-fallthrough)
 
-# Currently, disable gcc-12 array-bounds globally.
+# Currently, disable gcc-11,12 array-bounds globally.
  # We may want to target only particular configurations some day.
+config GCC11_NO_ARRAY_BOUNDS
+	def_bool y
+
  config GCC12_NO_ARRAY_BOUNDS
  	def_bool y
 
  config CC_NO_ARRAY_BOUNDS
  	bool
+	default y if CC_IS_GCC && GCC_VERSION >= 110000 && GCC_VERSION < 120000 && GCC11_NO_ARRAY_BOUNDS
  	default y if CC_IS_GCC && GCC_VERSION >= 120000 && GCC_VERSION < 130000 && GCC12_NO_ARRAY_BOUNDS
 
  #
Signature · 2 lines
js
suse labs
author maintainer
#11 lore raw

PATCH 10/10 net: sched: disallow noqueue for qdisc classes

In reply to Greg Kroah-Hartman

From: Frederick Lawler <[email protected]>

commit 96398560f26aa07e8f2969d73c8197e6a6d10407 upstream.

While experimenting with applying noqueue to a classful queue discipline, we discovered a NULL pointer dereference in the __dev_queue_xmit() path that generates a kernel OOPS:

# dev=enp0s5
# tc qdisc replace dev $dev root handle 1: htb default 1 # tc class add dev $dev parent 1: classid 1:1 htb rate 10mbit # tc qdisc add dev $dev parent 1:1 handle 10: noqueue # ping -I $dev -w 1 -c 1 1.1.1.1

[    2.172856] BUG: kernel NULL pointer dereference, address: 0000000000000000
[    2.173217] #PF: supervisor instruction fetch in kernel mode
...
[    2.178451] Call Trace:
[    2.178577]  <TASK>
[    2.178686]  htb_enqueue+0x1c8/0x370
[    2.178880]  dev_qdisc_enqueue+0x15/0x90
[    2.179093]  __dev_queue_xmit+0x798/0xd00
[    2.179305]  ? _raw_write_lock_bh+0xe/0x30
[    2.179522]  ? __local_bh_enable_ip+0x32/0x70
[    2.179759]  ? ___neigh_create+0x610/0x840
[    2.179968]  ? eth_header+0x21/0xc0
[    2.180144]  ip_finish_output2+0x15e/0x4f0
[    2.180348]  ? dst_output+0x30/0x30
[    2.180525]  ip_push_pending_frames+0x9d/0xb0
[    2.180739]  raw_sendmsg+0x601/0xcb0
[    2.180916]  ? _raw_spin_trylock+0xe/0x50
[    2.181112]  ? _raw_spin_unlock_irqrestore+0x16/0x30
[    2.181354]  ? get_page_from_freelist+0xcd6/0xdf0
[    2.181594]  ? sock_sendmsg+0x56/0x60
[    2.181781]  sock_sendmsg+0x56/0x60
[    2.181958]  __sys_sendto+0xf7/0x160
[    2.182139]  ? handle_mm_fault+0x6e/0x1d0
[    2.182366]  ? do_user_addr_fault+0x1e1/0x660
[    2.182627]  __x64_sys_sendto+0x1b/0x30
[    2.182881]  do_syscall_64+0x38/0x90
[    2.183085]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
...
[    2.187402]  </TASK>

Previously in commit d66d6c3152e8 ("net: sched: register noqueue qdisc"), NULL was set for the noqueue discipline on noqueue init so that __dev_queue_xmit() falls through for the noqueue case. This also sets a bypass of the enqueue NULL check in the register_qdisc() function for the struct noqueue_disc_ops.

Classful queue disciplines make it past the NULL check in __dev_queue_xmit() because the discipline is set to htb (in this case), and then in the call to __dev_xmit_skb(), it calls into htb_enqueue() which grabs a leaf node for a class and then calls qdisc_enqueue() by passing in a queue discipline which assumes ->enqueue() is not set to NULL.

Fix this by not allowing classes to be assigned to the noqueue discipline. Linux TC Notes states that classes cannot be set to the noqueue discipline. [1] Let's enforce that here.

Links:
1. https://linux-tc-notes.sourceforge.net/tc/doc/sch_noqueue.txt

---
 net/sched/sch_api.c |    5 +++++
 1 file changed, 5 insertions(+)
net/sched/sch_api.c +5 -0
@@ -1132,6 +1132,11 @@ skip:
 			return -ENOENT;
 		}
 
+		if (new && new->ops == &noqueue_qdisc_ops) {
+			NL_SET_ERR_MSG(extack, "Cannot assign noqueue to a class");
+			return -EINVAL;
+		}
+
 		err = cops->graft(parent, cl, new, &old, extack);
 		if (err)
 			return err;
Tested-by on the v1 series
#12 lore raw
In reply to Greg Kroah-Hartman

Hey Greg,

Quoted 5 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.1.6 release. There are 10 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Quoted 8 lines

Responses should be made by Sat, 14 Jan 2023 13:53:18 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.6-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
and the diffstat can be found below.

Looks like not much in it that's of concern for RISC-V, but FWIW:

Thanks,
Conor.

Tested-by on the v1 series
#13 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.1.6 release. There are 10 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 14 Jan 2023 13:53:18 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.6-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
and the diffstat can be found below.

thanks,

greg k-h

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Tested-by on the v1 series
#14 lore raw
In reply to Greg Kroah-Hartman
Quoted 7 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.1.6 release. There are 10 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 14 Jan 2023 13:53:18 +0000. Anything received after that time might be too late.

No regressions found on WSL x86_64 or WSL arm64

Built, booted, and reviewed dmesg.

Thank you.

Tested-by on the v1 series
#15 lore raw
In reply to Greg Kroah-Hartman

Hi Greg

Quoted 9 lines

This is the start of the stable review cycle for the 6.1.6 release. There are 10 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 14 Jan 2023 13:53:18 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
        https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.6-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
and the diffstat can be found below.

thanks,

greg k-h

6.1.6-rc1 tested.

x86_64

build successfully completed
boot successfully completed

Lenovo ThinkPad X1 Nano Gen1(Intel i5-1130G7, arch linux)

Thanks

Tested-by on the v1 series
#16 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.1.6 release. There are 10 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 14 Jan 2023 13:53:18 +0000. Anything received after that time might be too late.

Build results:

	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 500 pass: 500 fail: 0

Guenter

Tested-by on the v1 series
#17 lore raw
In reply to Greg Kroah-Hartman
Quoted 5 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.1.6 release. There are 10 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Successfully cross-compiled for arm64 (bcm2711_defconfig, GCC 10.2.0) and powerpc (ps3_defconfig, GCC 12.2.0).

Signature · 1 line
An old man doll... just what I always wanted! - Clara
Tested-by on the v1 series
#18 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.1.6 release. There are 10 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 14 Jan 2023 13:53:18 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.6-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
and the diffstat can be found below.

thanks,

greg k-h

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Tested-by on the v1 series
#19 lore raw
In reply to Greg Kroah-Hartman

Hi Greg,

Quoted 7 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.1.6 release. There are 10 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 14 Jan 2023 13:53:18 +0000. Anything received after that time might be too late.

Build test (gcc version 12.2.1 20221127):
mips: 52 configs -> no failure
arm: 100 configs -> no failure
arm64: 3 configs -> no failure
x86_64: 4 configs -> no failure
alpha allmodconfig -> no failure
csky allmodconfig -> no failure
powerpc allmodconfig -> no failure
riscv allmodconfig -> no failure
s390 allmodconfig -> no failure
xtensa allmodconfig -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]
mips: Booted on ci20 board. No regression. [3]

[1]. https://openqa.qa.codethink.co.uk/tests/2630
[2]. https://openqa.qa.codethink.co.uk/tests/2631
[3]. https://openqa.qa.codethink.co.uk/tests/2634

Signature · 2 lines
Regards
Sudip
maintainer Tested-by on the v1 series
#20 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.1.6 release. There are 10 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 14 Jan 2023 13:53:18 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.6-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
and the diffstat can be found below.

thanks,

greg k-h

All tests passing for Tegra ...

Test results for stable-v6.1:

    11 builds:	11 pass, 0 fail
    28 boots:	28 pass, 0 fail
    130 tests:	130 pass, 0 fail

Linux version: 6.1.6-rc1-g5eedeabf82ee
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Jon

Tested-by Linux Kernel Functional Testing on the v1 series
#21 lore raw
In reply to Greg Kroah-Hartman
Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.1.6 release. There are 10 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 14 Jan 2023 13:53:18 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.6-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
and the diffstat can be found below.

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 6.1.6-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-6.1.y
* git commit: 5eedeabf82ee83045c63fd32b2473e1d61885204
* git describe: v6.1.5-11-g5eedeabf82ee
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.1.y/build/v6.1.5-11-g5eedeabf82ee

## Test Regressions (compared to v6.1.4-160-g06bcfb15cd3b)

## Metric Regressions (compared to v6.1.4-160-g06bcfb15cd3b)

## Test Fixes (compared to v6.1.4-160-g06bcfb15cd3b)

## Metric Fixes (compared to v6.1.4-160-g06bcfb15cd3b)

## Test result summary
total: 183886, pass: 153292, fail: 5185, skip: 25382, xfail: 27

## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 151 total, 148 passed, 3 failed
* arm64: 51 total, 50 passed, 1 failed
* i386: 39 total, 36 passed, 3 failed
* mips: 30 total, 28 passed, 2 failed
* parisc: 8 total, 8 passed, 0 failed
* powerpc: 38 total, 32 passed, 6 failed
* riscv: 16 total, 15 passed, 1 failed
* s390: 16 total, 14 passed, 2 failed
* sh: 14 total, 12 passed, 2 failed
* sparc: 8 total, 8 passed, 0 failed
* x86_64: 44 total, 44 passed, 0 failed

## Test suites summary
* boot
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net-forwarding
* kselftest-net-mptcp
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* packetdrill
* perf
* rcutorture
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

Tested-by on the v1 series
#22 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines

This is the start of the stable review cycle for the 6.1.6 release. There are 10 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 14 Jan 2023 13:53:18 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.6-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
and the diffstat can be found below.

thanks,

greg k-h

Compiled and booted on my x86_64 and ARM64 test systems. No errors or regressions.

Thanks.

Tested-by on the v1 series
#23 lore raw
In reply to Greg Kroah-Hartman
Quoted 7 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.1.6 release. There are 10 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 14 Jan 2023 13:53:18 +0000. Anything received after that time might be too late.

Hi Greg,

6.1.6-rc1 tested.

Run tested on:
- Allwinner H6 (Tanix TX6)
- Intel Alder Lake x86_64 (nuc12 i7-1260P)

In addition - build tested for:
- Allwinner A64
- Allwinner H3
- Allwinner H5
- NXP iMX6
- NXP iMX8
- Qualcomm Dragonboard
- Rockchip RK3288
- Rockchip RK3328
- Rockchip RK3399pro
- Samsung Exynos

--
Rudi