Skip to contentSkip to conversation

hwmon: (emc2305) fix kernel-doc warnings

PATCH Applied Randy Dunlap 2 participants 2 messages Jan 13, 2023 – Jan 15, 2023 Hardware monitoring

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 hwmon: (emc2305) fix kernel-doc warnings

Fix kernel-doc warnings:
drivers/hwmon/emc2305.c:62: warning: Cannot understand * @cdev: cooling device;
on line 62 - I thought it was a doc line
drivers/hwmon/emc2305.c:89: warning: Cannot understand * @client: i2c client;
on line 89 - I thought it was a doc line

and drop ';' at end of each struct member line.

---
 drivers/hwmon/emc2305.c |   24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)
drivers/hwmon/emc2305.c +13 -11
diff -- a/drivers/hwmon/emc2305.c b/drivers/hwmon/emc2305.c
@@ -59,10 +59,11 @@ static const struct i2c_device_id emc230
 MODULE_DEVICE_TABLE(i2c, emc2305_ids);
 
 /**
- * @cdev: cooling device;
- * @curr_state: cooling current state;
- * @last_hwmon_state: last cooling state updated by hwmon subsystem;
- * @last_thermal_state: last cooling state updated by thermal subsystem;
+ * struct emc2305_cdev_data - device-specific cooling device state
+ * @cdev: cooling device
+ * @cur_state: cooling current state
+ * @last_hwmon_state: last cooling state updated by hwmon subsystem
+ * @last_thermal_state: last cooling state updated by thermal subsystem
  *
  * The 'last_hwmon_state' and 'last_thermal_state' fields are provided to support fan low limit
  * speed feature. The purpose of this feature is to provides ability to limit fan speed
@@ -86,13 +87,14 @@ struct emc2305_cdev_data {
 };
 
 /**
- * @client: i2c client;
- * @hwmon_dev: hwmon device;
- * @max_state: maximum cooling state of the cooling device;
- * @pwm_num: number of PWM channels;
- * @pwm_separate: separate PWM settings for every channel;
- * @pwm_min: array of minimum PWM per channel;
- * @cdev_data: array of cooling devices data;
+ * struct emc2305_data - device-specific data
+ * @client: i2c client
+ * @hwmon_dev: hwmon device
+ * @max_state: maximum cooling state of the cooling device
+ * @pwm_num: number of PWM channels
+ * @pwm_separate: separate PWM settings for every channel
+ * @pwm_min: array of minimum PWM per channel
+ * @cdev_data: array of cooling devices data
  */
 struct emc2305_data {
 	struct i2c_client *client;
maintainer Applied
#1 lore raw
Quoted 6 lines · Randy Dunlap

Fix kernel-doc warnings:
drivers/hwmon/emc2305.c:62: warning: Cannot understand * @cdev: cooling device;
on line 62 - I thought it was a doc line
drivers/hwmon/emc2305.c:89: warning: Cannot understand * @client: i2c client;
on line 89 - I thought it was a doc line

Quoted 6 lines

and drop ';' at end of each struct member line.

Applied to hwmon-next.

Thanks,
Guenter