hwmon: add initial NXP MC34VR500 PMIC monitoring support
PATCH v2 1/2 hwmon: add initial NXP MC34VR500 PMIC monitoring support
This patch adds initial monitoring support for the MC34VR500 PMIC. In its current form, input voltage and temperature alarms are reported to hwmon.
Datasheet:
- https://www.nxp.com/docs/en/data-sheet/MC34VR500.pdf
Changes since v1:
- included required #defines directly in the C file
- removed separate header file
- removed #defines for unimplemented sensors
- removed error log output
- use hwmon_device_register_with_info API
- cleaned probe function
- added documentation for chip and dt bindings
Signed-off-by Mario Kicherer <[email protected]>
--- drivers/hwmon/Kconfig | 7 ++ drivers/hwmon/Makefile | 1 + drivers/hwmon/mc34vr500.c | 245 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 253 insertions(+) create mode 100644 drivers/hwmon/mc34vr500.c
drivers/hwmon/Kconfig +7 -0
@@ -1166,6 +1166,13 @@ config SENSORS_MAX31790 This driver can also be built as a module. If so, the module will be called max31790. +config SENSORS_MC34VR500 + tristate "NXP MC34VR500 hardware monitoring driver" + depends on I2C + help + If you say yes here you get support for the temperature and input + voltage sensors of the NXP MC34VR500. + config SENSORS_MCP3021 tristate "Microchip MCP3021 and compatibles" depends on I2C
drivers/hwmon/Makefile +1 -0
@@ -149,6 +149,7 @@ obj-$(CONFIG_SENSORS_MAX6650) += max6650.o obj-$(CONFIG_SENSORS_MAX6697) += max6697.o obj-$(CONFIG_SENSORS_MAX31790) += max31790.o obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o +obj-$(CONFIG_SENSORS_MC34VR500) += mc34vr500.o obj-$(CONFIG_SENSORS_MCP3021) += mcp3021.o obj-$(CONFIG_SENSORS_TC654) += tc654.o obj-$(CONFIG_SENSORS_TPS23861) += tps23861.o
drivers/hwmon/mc34vr500.c new file +245 -0
245 lines not on this page · raw message
Signature · 1 line
2.34.1