ARM: dts: qcom: ipq8064: move reg-less nodes outside soc node
Subsystems (2)
PATCH 1/1 ARM: dts: qcom: ipq8064: move reg-less nodes outside soc node
Move node that doesn't have a reg outside the soc node as it should only contain reg nodes.
No changes intended.
Signed-off-by Christian Marangi <[email protected]>
--- arch/arm/boot/dts/qcom-ipq8064.dtsi | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)
arch/arm/boot/dts/qcom-ipq8064.dtsi +14 -14
@@ -326,26 +326,26 @@ scm { }; }; + stmmac_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <7>; + snps,rd_osr_lmt = <7>; + snps,blen = <16 0 0 0 0 0 0>; + }; + + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; ranges; compatible = "simple-bus"; - stmmac_axi_setup: stmmac-axi-config { - snps,wr_osr_lmt = <7>; - snps,rd_osr_lmt = <7>; - snps,blen = <16 0 0 0 0 0 0>; - }; - - vsdcc_fixed: vsdcc-regulator { - compatible = "regulator-fixed"; - regulator-name = "SDCC Power"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - rpm: rpm@108000 { compatible = "qcom,rpm-ipq8064"; reg = <0x00108000 0x1000>;
Signature · 1 line
2.38.1
Bjorn Andersson
AppliedQuoted 5 lines · Christian Marangi
Move node that doesn't have a reg outside the soc node as it should only contain reg nodes.
No changes intended.
Applied, thanks!
[1/1] ARM: dts: qcom: ipq8064: move reg-less nodes outside soc node
commit: 6739f57dea1657d410f267c05349b1d2d90771f0
Best regards,
Signature · 1 line
Bjorn Andersson <[email protected]>