Skip to contentSkip to conversation

arm64: dts: imx8mm: Drop sd-vsel-gpios from i.MX8M Mini Verdin SoM

PATCH Applied Marek Vasut 4 participants 9 messages Jan 18, 2023 – Jan 26, 2023

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/3 arm64: dts: imx8mm: Drop sd-vsel-gpios from i.MX8M Mini Verdin SoM

The VSELECT pin is configured as MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT and not as a GPIO, drop the bogus sd-vsel-gpios property as the eSDHC block handles the VSELECT pin on its own.

---
Cc: Andrejs Cainikovs <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Marcel Ziswiler <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Max Krummenacher <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: Peng Fan <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Philippe Schenker <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: [email protected]
To: [email protected]

---
 arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 1 -
 1 file changed, 1 deletion(-)
arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +0 -1
index 5b2493bb8dd93..37acaf62f5c78 100644
@@ -362,7 +362,6 @@ pca9450: pmic@25 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		reg = <0x25>;
-		sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 
 		/*
 		 * The bootloader is expected to switch on the I2C level shifter for the TLA2024 ADC
Signature · 1 line
2.39.0
#1 lore raw

PATCH 2/3 arm64: dts: imx8mp: Drop sd-vsel-gpios from i.MX8M Plus Verdin SoM

The VSELECT pin is configured as MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT and not as a GPIO, drop the bogus sd-vsel-gpios property as the eSDHC block handles the VSELECT pin on its own.

---
Cc: Andrejs Cainikovs <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Marcel Ziswiler <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Max Krummenacher <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: Peng Fan <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Philippe Schenker <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: [email protected]
To: [email protected]

---
 arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 1 -
 1 file changed, 1 deletion(-)
arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +0 -1
index 6a1890a4b5d88..a6e317af272fe 100644
@@ -453,7 +453,6 @@ pca9450: pmic@25 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		reg = <0x25>;
-		sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 
 		/*
 		 * The bootloader is expected to switch on LDO4 for the on-module +V3.3_ADC and the
Signature · 1 line
2.39.0
Reviewed-by on v1 2/3
#2 lore raw

Re: [PATCH 2/3] arm64: dts: imx8mp: Drop sd-vsel-gpios from i.MX8M Plus Verdin SoM

Quoted 5 lines · Marek Vasut

The VSELECT pin is configured as MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT and not as a GPIO, drop the bogus sd-vsel-gpios property as the eSDHC block handles the VSELECT pin on its own.

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Reviewed-by on v1 2/3
#3 lore raw

Re: [PATCH 2/3] arm64: dts: imx8mp: Drop sd-vsel-gpios from i.MX8M Plus Verdin SoM

In reply to Marek Vasut
Quoted 5 lines · Marek Vasut

The VSELECT pin is configured as MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT and not as a GPIO, drop the bogus sd-vsel-gpios property as the eSDHC block handles the VSELECT pin on its own.

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#4 lore raw

PATCH 3/3 arm64: dts: imx8mp: Drop sd-vsel-gpios from i.MX8M Plus DHCOM SoM

In reply to Marek Vasut

The VSELECT pin is configured as MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT and not as a GPIO, drop the bogus sd-vsel-gpios property as the eSDHC block handles the VSELECT pin on its own.

---
Cc: Andrejs Cainikovs <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Marcel Ziswiler <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Max Krummenacher <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: Peng Fan <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Philippe Schenker <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: [email protected]
To: [email protected]

---
 arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi | 1 -
 1 file changed, 1 deletion(-)
arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi +0 -1
index 21b1d75a9a1cf..fb87a73859830 100644
@@ -239,7 +239,6 @@ pmic: pmic@25 {
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-		sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 
 		/*
 		 * i.MX 8M Plus Data Sheet for Consumer Products
Signature · 1 line
2.39.0
Reviewed-by on v1 3/3
#5 lore raw

Re: [PATCH 3/3] arm64: dts: imx8mp: Drop sd-vsel-gpios from i.MX8M Plus DHCOM SoM

Quoted 5 lines · Marek Vasut

The VSELECT pin is configured as MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT and not as a GPIO, drop the bogus sd-vsel-gpios property as the eSDHC block handles the VSELECT pin on its own.

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Reviewed-by on v1 1/3
#6 lore raw
In reply to Marek Vasut
Quoted 5 lines · Marek Vasut

The VSELECT pin is configured as MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT and not as a GPIO, drop the bogus sd-vsel-gpios property as the eSDHC block handles the VSELECT pin on its own.

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Reviewed-by on v1 1/3
#7 lore raw
In reply to Marek Vasut
Quoted 5 lines · Marek Vasut

The VSELECT pin is configured as MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT and not as a GPIO, drop the bogus sd-vsel-gpios property as the eSDHC block handles the VSELECT pin on its own.

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel