Skip to contentSkip to conversation

tests/qtest/bios-tables-test: Make the test less verbose by default

PATCH In review Thomas Huth 4 participants 4 messages Jan 18, 2023 – Jan 19, 2023

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 tests/qtest/bios-tables-test: Make the test less verbose by default

We are facing the issues that our test logs in the gitlab CI are too big (and thus cut off). The bios-tables-test is one of the few qtests that prints many lines of output by default when running with V=1, so it contributes to this problem. Almost all other qtests are silent with V=1 and only print debug messages with V=2 and higher. Thus let's change the bios-tables-test to behave more like the other tests and only print the debug messages with V=2 (or higher).

---
See also this discussion here:
https://lore.kernel.org/qemu-devel/[email protected]/

 tests/qtest/bios-tables-test.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)
tests/qtest/bios-tables-test.c +12 -5
index 8608408213..355d0c3d56 100644
@@ -24,7 +24,7 @@
  * You will also notice that tests/qtest/bios-tables-test-allowed-diff.h lists
  * a bunch of files. This is your hint that you need to do the below:
  * 4. Run
- *      make check V=1
+ *      make check V=2
  * this will produce a bunch of warnings about differences
  * beween actual and expected ACPI tables. If you have IASL installed,
  * they will also be disassembled so you can look at the disassembled
@@ -108,6 +108,8 @@ static const char *iasl = CONFIG_IASL;
 static const char *iasl;
 #endif
 
+static int verbosity_level;
+
 static bool compare_signature(const AcpiSdtTable *sdt, const char *signature)
 {
    return !memcmp(sdt->aml, signature, 4);
@@ -368,7 +370,7 @@ static GArray *load_expected_aml(test_data *data)
     gsize aml_len;
 
     GArray *exp_tables = g_array_new(false, true, sizeof(AcpiSdtTable));
-    if (getenv("V")) {
+    if (verbosity_level >= 2) {
         fputc('\n', stderr);
     }
     for (i = 0; i < data->tables->len; ++i) {
@@ -383,7 +385,7 @@ static GArray *load_expected_aml(test_data *data)
 try_again:
         aml_file = g_strdup_printf("%s/%s/%.4s%s", data_dir, data->machine,
                                    sdt->aml, ext);
-        if (getenv("V")) {
+        if (verbosity_level >= 2) {
             fprintf(stderr, "Looking for expected file '%s'\n", aml_file);
         }
         if (g_file_test(aml_file, G_FILE_TEST_EXISTS)) {
@@ -395,7 +397,7 @@ try_again:
             goto try_again;
         }
         g_assert(exp_sdt.aml_file);
-        if (getenv("V")) {
+        if (verbosity_level >= 2) {
             fprintf(stderr, "Using expected file '%s'\n", aml_file);
         }
         ret = g_file_get_contents(aml_file, (gchar **)&exp_sdt.aml,
@@ -503,7 +505,7 @@ static void test_acpi_asl(test_data *data)
                         exp_sdt->aml, sdt->asl_file, sdt->aml_file,
                         exp_sdt->asl_file, exp_sdt->aml_file);
                 fflush(stderr);
-                if (getenv("V")) {
+                if (verbosity_level >= 1) {
                     const char *diff_env = getenv("DIFF");
                     const char *diff_cmd = diff_env ? diff_env : "diff -U 16";
                     char *diff = g_strdup_printf("%s %s %s", diff_cmd,
@@ -1974,8 +1976,13 @@ int main(int argc, char *argv[])
     const char *arch = qtest_get_arch();
     const bool has_kvm = qtest_has_accel("kvm");
     const bool has_tcg = qtest_has_accel("tcg");
+    char *v_env = getenv("V");
     int ret;
 
+    if (v_env) {
+        verbosity_level = atoi(v_env);
+    }
+
     g_test_init(&argc, &argv, NULL);
 
     if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) {
Signature · 1 line
2.31.1
Reviewed-by on v1 1/1
#1 lore raw
Quoted 8 lines · Thomas Huth

We are facing the issues that our test logs in the gitlab CI are too big (and thus cut off). The bios-tables-test is one of the few qtests that prints many lines of output by default when running with V=1, so it contributes to this problem. Almost all other qtests are silent with V=1 and only print debug messages with V=2 and higher. Thus let's change the bios-tables-test to behave more like the other tests and only print the debug messages with V=2 (or higher).

Quoted 7 lines

---
See also this discussion here:
https://lore.kernel.org/qemu-devel/[email protected]/

 tests/qtest/bios-tables-test.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

With regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|
Reviewed-by on v1 1/1
#2 lore raw
In reply to Thomas Huth
Quoted 8 lines · Thomas Huth

We are facing the issues that our test logs in the gitlab CI are too big (and thus cut off). The bios-tables-test is one of the few qtests that prints many lines of output by default when running with V=1, so it contributes to this problem. Almost all other qtests are silent with V=1 and only print debug messages with V=2 and higher. Thus let's change the bios-tables-test to behave more like the other tests and only print the debug messages with V=2 (or higher).

Quoted 7 lines

---
See also this discussion here:
https://lore.kernel.org/qemu-devel/[email protected]/

  tests/qtest/bios-tables-test.c | 17 ++++++++++++-----
  1 file changed, 12 insertions(+), 5 deletions(-)
Reviewed-by on v1 1/1
#3 lore raw
In reply to Thomas Huth
Quoted 7 lines · On Wed, 18 Jan 2023 13:51:32 +0100 Thomas Huth <[email protected]> wrote:

We are facing the issues that our test logs in the gitlab CI are too big (and thus cut off). The bios-tables-test is one of the few qtests that prints many lines of output by default when running with V=1, so it contributes to this problem. Almost all other qtests are silent with V=1 and only print debug messages with V=2 and higher. Thus let's change the bios-tables-test to behave more like the other tests and only print the debug messages with V=2 (or higher).

Quoted 81 lines

---
See also this discussion here:
https://lore.kernel.org/qemu-devel/[email protected]/

 tests/qtest/bios-tables-test.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)
tests/qtest/bios-tables-test.c +12 -5
index 8608408213..355d0c3d56 100644
@@ -24,7 +24,7 @@
  * You will also notice that tests/qtest/bios-tables-test-allowed-diff.h lists
  * a bunch of files. This is your hint that you need to do the below:
  * 4. Run
- *      make check V=1
+ *      make check V=2
  * this will produce a bunch of warnings about differences
  * beween actual and expected ACPI tables. If you have IASL installed,
  * they will also be disassembled so you can look at the disassembled
@@ -108,6 +108,8 @@ static const char *iasl = CONFIG_IASL;
 static const char *iasl;
 #endif
 
+static int verbosity_level;
+
 static bool compare_signature(const AcpiSdtTable *sdt, const char *signature)
 {
    return !memcmp(sdt->aml, signature, 4);
@@ -368,7 +370,7 @@ static GArray *load_expected_aml(test_data *data)
     gsize aml_len;
 
     GArray *exp_tables = g_array_new(false, true, sizeof(AcpiSdtTable));
-    if (getenv("V")) {
+    if (verbosity_level >= 2) {
         fputc('\n', stderr);
     }
     for (i = 0; i < data->tables->len; ++i) {
@@ -383,7 +385,7 @@ static GArray *load_expected_aml(test_data *data)
 try_again:
         aml_file = g_strdup_printf("%s/%s/%.4s%s", data_dir, data->machine,
                                    sdt->aml, ext);
-        if (getenv("V")) {
+        if (verbosity_level >= 2) {
             fprintf(stderr, "Looking for expected file '%s'\n", aml_file);
         }
         if (g_file_test(aml_file, G_FILE_TEST_EXISTS)) {
@@ -395,7 +397,7 @@ try_again:
             goto try_again;
         }
         g_assert(exp_sdt.aml_file);
-        if (getenv("V")) {
+        if (verbosity_level >= 2) {
             fprintf(stderr, "Using expected file '%s'\n", aml_file);
         }
         ret = g_file_get_contents(aml_file, (gchar **)&exp_sdt.aml,
@@ -503,7 +505,7 @@ static void test_acpi_asl(test_data *data)
                         exp_sdt->aml, sdt->asl_file, sdt->aml_file,
                         exp_sdt->asl_file, exp_sdt->aml_file);
                 fflush(stderr);
-                if (getenv("V")) {
+                if (verbosity_level >= 1) {
                     const char *diff_env = getenv("DIFF");
                     const char *diff_cmd = diff_env ? diff_env : "diff -U 16";
                     char *diff = g_strdup_printf("%s %s %s", diff_cmd,
@@ -1974,8 +1976,13 @@ int main(int argc, char *argv[])
     const char *arch = qtest_get_arch();
     const bool has_kvm = qtest_has_accel("kvm");
     const bool has_tcg = qtest_has_accel("tcg");
+    char *v_env = getenv("V");
     int ret;
 
+    if (v_env) {
+        verbosity_level = atoi(v_env);
+    }
+
     g_test_init(&argc, &argv, NULL);
 
     if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) {