Skip to contentSkip to conversation

Introduce new DCB rewrite table

PATCH Applied Daniel Machon 3 participants 12 messages Jan 18, 2023 – Jan 20, 2023

Subsystems (3)
lore
Share & tools
lore

Daniel Machon

author maintainer
#0 lore raw

v3 cover Introduce new DCB rewrite table

There is currently no support for per-port egress mapping of priority to PCP and priority to DSCP. Some support for expressing egress mapping of PCP is supported through ip link, with the 'egress-qos-map', however this command only maps priority to PCP, and for vlan interfaces only. DCB APP already has support for per-port ingress mapping of PCP/DEI, DSCP and a bunch of other stuff. So why not take advantage of this fact, and add a new table that does the reverse.

This patch series introduces the new DCB rewrite table. Whereas the DCB APP table deals with ingress mapping of PID (protocol identifier) to priority, the rewrite table deals with egress mapping of priority to PID.

It is indeed possible to integrate rewrite in the existing APP table, by introducing new dedicated rewrite selectors, and altering existing functions to treat rewrite entries specially. However, I feel like this is not a good solution, and will pollute the APP namespace. APP is well-defined in IEEE, and some userspace relies of advertised entries - for this fact, separating APP and rewrite into to completely separate objects, seems to me the best solution.

The new table shares much functionality with the APP table, and as such, much existing code is reused, or slightly modified, to work for both.

================================================================================
DCB rewrite table in a nutshell
================================================================================
The table is implemented as a simple linked list, and uses the same lock as the APP table. New functions for getting, setting and deleting entries have been added, and these are exported, so they can be used by the stack or drivers. Additionnaly, new dcbnl_setrewr and dcnl_delrewr hooks has been added, to support hardware offload of the entries.

================================================================================
Sparx5 per-port PCP rewrite support
================================================================================
Sparx5 supports PCP egress mapping through two eight-entry switch tables. One table maps QoS class 0-7 to PCP for DE0 (DP levels mapped to drop-eligibility 0) and the other for DE1. DCB does currently not have support for expressing DP/color, so instead, the tagged DEI bit will reflect the DP levels, for any rewrite entries> 7 ('de').

The driver will take apptrust (contributed earlier) into consideration, so that the mapping tables only be used, if PCP is trusted *and* the rewrite table has active mappings, otherwise classified PCP (same as frame PCP) will be used instead.

================================================================================
Sparx5 per-port DSCP rewrite support
================================================================================
Sparx5 support DSCP egress mapping through a single 32-entry table. This table maps classified QoS class and DP level to classified DSCP, and is consulted by the switch Analyzer Classifier at ingress. At egress, the frame DSCP can either be rewritten to classified DSCP to frame DSCP.

The driver will take apptrust into consideration, so that the mapping tables only be used, if DSCP is trusted *and* the rewrite table has active mappings, otherwise frame DSCP will be used instead.

================================================================================
Patches
================================================================================
Patch #1 modifies dcb_app_add to work for both APP and rewrite

Patch #2 adds dcbnl_app_table_setdel() for setting and deleting both APP and
rewrite entries.

Patch #3 adds the rewrite table and all required functions, offload hooks and
bookkeeping for maintaining it.

Patch #4 adds two new helper functions for getting a priority to PCP bitmask
map, and a priority to DSCP bitmask map.

Patch #5 adds support for PCP rewrite in the Sparx5 driver. Patch #6 adds support for DSCP rewrite in the Sparx5 driver.

================================================================================
v2 -> v3:
in dcbnl_ieee_fill() use nla_nest_start() instead of the _noflag() version. Also, cancel the rewrite nest in case of an error (Petr Machata).

v1 -> v2:
In dcb_setrewr() change proto to u16 as it ought to be, and remove zero initialization of err. (Dan Carpenter).
Change name of dcbnl_apprewr_setdel -> dcbnl_app_table_setdel and change the function signature to take a single function pointer. Update uses accordingly (Petr Machata).

Daniel Machon (6):
net: dcb: modify dcb_app_add to take list_head ptr as parameter
net: dcb: add new common function for set/del of app/rewr entries
net: dcb: add new rewrite table
net: dcb: add helper functions to retrieve PCP and DSCP rewrite maps
net: microchip: sparx5: add support for PCP rewrite
net: microchip: sparx5: add support for DSCP rewrite

 .../ethernet/microchip/sparx5/sparx5_dcb.c    | 121 +++++++-
 .../microchip/sparx5/sparx5_main_regs.h       |  70 ++++-
 .../ethernet/microchip/sparx5/sparx5_port.c   |  97 +++++++
 .../ethernet/microchip/sparx5/sparx5_port.h   |  41 +++
 include/net/dcbnl.h                           |  18 ++
 include/uapi/linux/dcbnl.h                    |   2 +
 net/dcb/dcbnl.c                               | 272 ++++++++++++++----
 7 files changed, 548 insertions(+), 73 deletions(-)

--
2.34.1

author maintainer
#1 lore raw

PATCH v3 1/6 net: dcb: modify dcb_app_add to take list_head ptr as parameter

In preparation to DCB rewrite. Modify dcb_app_add to take new struct list_head * as parameter, to make the used list configurable. This is done to allow reusing the function for adding rewrite entries to the rewrite table, which is introduced in a later patch.

---
 net/dcb/dcbnl.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
net/dcb/dcbnl.c +5 -4
index f9949e051f49..a76bdf6f0198 100644
@@ -1955,7 +1955,8 @@ static struct dcb_app_type *dcb_app_lookup(const struct dcb_app *app,
 	return NULL;
 }
 
-static int dcb_app_add(const struct dcb_app *app, int ifindex)
+static int dcb_app_add(struct list_head *list, const struct dcb_app *app,
+		       int ifindex)
 {
 	struct dcb_app_type *entry;
 
@@ -1965,7 +1966,7 @@ static int dcb_app_add(const struct dcb_app *app, int ifindex)
 
 	memcpy(&entry->app, app, sizeof(*app));
 	entry->ifindex = ifindex;
-	list_add(&entry->list, &dcb_app_list);
+	list_add(&entry->list, list);
 
 	return 0;
 }
@@ -2028,7 +2029,7 @@ int dcb_setapp(struct net_device *dev, struct dcb_app *new)
 	}
 	/* App type does not exist add new application type */
 	if (new->priority)
-		err = dcb_app_add(new, dev->ifindex);
+		err = dcb_app_add(&dcb_app_list, new, dev->ifindex);
 out:
 	spin_unlock_bh(&dcb_lock);
 	if (!err)
@@ -2088,7 +2089,7 @@ int dcb_ieee_setapp(struct net_device *dev, struct dcb_app *new)
 		goto out;
 	}
 
-	err = dcb_app_add(new, dev->ifindex);
+	err = dcb_app_add(&dcb_app_list, new, dev->ifindex);
 out:
 	spin_unlock_bh(&dcb_lock);
 	if (!err)
Signature · 1 line
2.34.1
Reviewed-by on v3 1/6
#2 lore raw

Re: [PATCH net-next v3 1/6] net: dcb: modify dcb_app_add to take list_head ptr as parameter

Quoted 6 lines · Daniel Machon

In preparation to DCB rewrite. Modify dcb_app_add to take new struct list_head * as parameter, to make the used list configurable. This is done to allow reusing the function for adding rewrite entries to the rewrite table, which is introduced in a later patch.

author maintainer
#3 lore raw

PATCH v3 2/6 net: dcb: add new common function for set/del of app/rewr entries

In reply to Daniel Machon

In preparation for DCB rewrite. Add a new function for setting and deleting both app and rewrite entries. Moving this into a separate function reduces duplicate code, as both type of entries requires the same set of checks. The function will now iterate through a configurable nested attribute (app or rewrite attr), validate each attribute and call the appropriate set- or delete function.

Note that this function always checks for nla_len(attr_itr) < sizeof(struct dcb_app), which was only done in dcbnl_ieee_set and not in dcbnl_ieee_del prior to this patch. This means, that any userspace tool that used to shove in data < sizeof(struct dcb_app) would now receive -ERANGE.

---
 net/dcb/dcbnl.c | 100 ++++++++++++++++++++++--------------------------
 1 file changed, 45 insertions(+), 55 deletions(-)
net/dcb/dcbnl.c +45 -55
index a76bdf6f0198..cb5319c6afe6 100644
@@ -1099,6 +1099,41 @@ static int dcbnl_getapptrust(struct net_device *netdev, struct sk_buff *skb)
 	return err;
 }
 
+/* Set or delete APP table or rewrite table entries. The APP struct is validated
+ * and the appropriate callback function is called.
+ */
+static int dcbnl_app_table_setdel(struct nlattr *attr,
+				  struct net_device *netdev,
+				  int (*setdel)(struct net_device *dev,
+						struct dcb_app *app))
+{
+	struct dcb_app *app_data;
+	enum ieee_attrs_app type;
+	struct nlattr *attr_itr;
+	int rem, err;
+
+	nla_for_each_nested(attr_itr, attr, rem) {
+		type = nla_type(attr_itr);
+
+		if (!dcbnl_app_attr_type_validate(type))
+			continue;
+
+		if (nla_len(attr_itr) < sizeof(struct dcb_app))
+			return -ERANGE;
+
+		app_data = nla_data(attr_itr);
+
+		if (!dcbnl_app_selector_validate(type, app_data->selector))
+			return -EINVAL;
+
+		err = setdel(netdev, app_data);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
 /* Handle IEEE 802.1Qaz/802.1Qau/802.1Qbb GET commands. */
 static int dcbnl_ieee_fill(struct sk_buff *skb, struct net_device *netdev)
 {
@@ -1568,36 +1603,11 @@ static int dcbnl_ieee_set(struct net_device *netdev, struct nlmsghdr *nlh,
 	}
 
 	if (ieee[DCB_ATTR_IEEE_APP_TABLE]) {
-		struct nlattr *attr;
-		int rem;
-
-		nla_for_each_nested(attr, ieee[DCB_ATTR_IEEE_APP_TABLE], rem) {
-			enum ieee_attrs_app type = nla_type(attr);
-			struct dcb_app *app_data;
-
-			if (!dcbnl_app_attr_type_validate(type))
-				continue;
-
-			if (nla_len(attr) < sizeof(struct dcb_app)) {
-				err = -ERANGE;
-				goto err;
-			}
-
-			app_data = nla_data(attr);
-
-			if (!dcbnl_app_selector_validate(type,
-							 app_data->selector)) {
-				err = -EINVAL;
-				goto err;
-			}
-
-			if (ops->ieee_setapp)
-				err = ops->ieee_setapp(netdev, app_data);
-			else
-				err = dcb_ieee_setapp(netdev, app_data);
-			if (err)
-				goto err;
-		}
+		err = dcbnl_app_table_setdel(ieee[DCB_ATTR_IEEE_APP_TABLE],
+					     netdev, ops->ieee_setapp ?:
+					     dcb_ieee_setapp);
+		if (err)
+			goto err;
 	}
 
 	if (ieee[DCB_ATTR_DCB_APP_TRUST_TABLE]) {
@@ -1684,31 +1694,11 @@ static int dcbnl_ieee_del(struct net_device *netdev, struct nlmsghdr *nlh,
 		return err;
 
 	if (ieee[DCB_ATTR_IEEE_APP_TABLE]) {
-		struct nlattr *attr;
-		int rem;
-
-		nla_for_each_nested(attr, ieee[DCB_ATTR_IEEE_APP_TABLE], rem) {
-			enum ieee_attrs_app type = nla_type(attr);
-			struct dcb_app *app_data;
-
-			if (!dcbnl_app_attr_type_validate(type))
-				continue;
-
-			app_data = nla_data(attr);
-
-			if (!dcbnl_app_selector_validate(type,
-							 app_data->selector)) {
-				err = -EINVAL;
-				goto err;
-			}
-
-			if (ops->ieee_delapp)
-				err = ops->ieee_delapp(netdev, app_data);
-			else
-				err = dcb_ieee_delapp(netdev, app_data);
-			if (err)
-				goto err;
-		}
+		err = dcbnl_app_table_setdel(ieee[DCB_ATTR_IEEE_APP_TABLE],
+					     netdev, ops->ieee_delapp ?:
+					     dcb_ieee_delapp);
+		if (err)
+			goto err;
 	}
 
 err:
Signature · 1 line
2.34.1
Reviewed-by on v3 2/6
#4 lore raw

Re: [PATCH net-next v3 2/6] net: dcb: add new common function for set/del of app/rewr entries

Quoted 7 lines · Daniel Machon

In preparation for DCB rewrite. Add a new function for setting and deleting both app and rewrite entries. Moving this into a separate function reduces duplicate code, as both type of entries requires the same set of checks. The function will now iterate through a configurable nested attribute (app or rewrite attr), validate each attribute and call the appropriate set- or delete function.

Quoted 7 lines

Note that this function always checks for nla_len(attr_itr) < sizeof(struct dcb_app), which was only done in dcbnl_ieee_set and not in dcbnl_ieee_del prior to this patch. This means, that any userspace tool that used to shove in data < sizeof(struct dcb_app) would now receive -ERANGE.

author maintainer
#5 lore raw

PATCH v3 3/6 net: dcb: add new rewrite table

In reply to Daniel Machon

Add new rewrite table and all the required functions, offload hooks and bookkeeping for maintaining it. The rewrite table reuses the app struct, and the entire set of app selectors. As such, some bookeeping code can be shared between the rewrite- and the APP table.

New functions for getting, setting and deleting entries has been added. Apart from operating on the rewrite list, these functions do not emit a DCB_APP_EVENT when the list os modified. The new dcb_getrewr does a lookup based on selector and priority and returns the protocol, so that mappings from priority to protocol, for a given selector and ifindex is obtained.

Also, a new nested attribute has been added, that encapsulates one or more app structs. This attribute is used to distinguish the two tables.

The dcb_lock used for the APP table is reused for the rewrite table.

---
 include/net/dcbnl.h        |   8 +++
 include/uapi/linux/dcbnl.h |   2 +
 net/dcb/dcbnl.c            | 113 ++++++++++++++++++++++++++++++++++++-
 3 files changed, 122 insertions(+), 1 deletion(-)
include/net/dcbnl.h +8 -0
index 8841ab6c2de7..fe7dfb8bcb5b 100644
@@ -19,6 +19,10 @@ struct dcb_app_type {
 	u8	dcbx;
 };
 
+u16 dcb_getrewr(struct net_device *dev, struct dcb_app *app);
+int dcb_setrewr(struct net_device *dev, struct dcb_app *app);
+int dcb_delrewr(struct net_device *dev, struct dcb_app *app);
+
 int dcb_setapp(struct net_device *, struct dcb_app *);
 u8 dcb_getapp(struct net_device *, struct dcb_app *);
 int dcb_ieee_setapp(struct net_device *, struct dcb_app *);
@@ -113,6 +117,10 @@ struct dcbnl_rtnl_ops {
 	/* apptrust */
 	int (*dcbnl_setapptrust)(struct net_device *, u8 *, int);
 	int (*dcbnl_getapptrust)(struct net_device *, u8 *, int *);
+
+	/* rewrite */
+	int (*dcbnl_setrewr)(struct net_device *dev, struct dcb_app *app);
+	int (*dcbnl_delrewr)(struct net_device *dev, struct dcb_app *app);
 };
 
 #endif /* __NET_DCBNL_H__ */
include/uapi/linux/dcbnl.h +2 -0
index 99047223ab26..7e15214aa5dd 100644
@@ -411,6 +411,7 @@ enum dcbnl_attrs {
  * @DCB_ATTR_IEEE_PEER_PFC: peer PFC configuration - get only
  * @DCB_ATTR_IEEE_PEER_APP: peer APP tlv - get only
  * @DCB_ATTR_DCB_APP_TRUST_TABLE: selector trust table
+ * @DCB_ATTR_DCB_REWR_TABLE: rewrite configuration
  */
 enum ieee_attrs {
 	DCB_ATTR_IEEE_UNSPEC,
@@ -425,6 +426,7 @@ enum ieee_attrs {
 	DCB_ATTR_IEEE_QCN_STATS,
 	DCB_ATTR_DCB_BUFFER,
 	DCB_ATTR_DCB_APP_TRUST_TABLE,
+	DCB_ATTR_DCB_REWR_TABLE,
 	__DCB_ATTR_IEEE_MAX
 };
 #define DCB_ATTR_IEEE_MAX (__DCB_ATTR_IEEE_MAX - 1)
net/dcb/dcbnl.c +112 -1

155 lines not on this page · raw message

Signature · 1 line
2.34.1
Reviewed-by on v3 3/6
#6 lore raw

Re: [PATCH net-next v3 3/6] net: dcb: add new rewrite table

Quoted 12 lines · Daniel Machon

Add new rewrite table and all the required functions, offload hooks and bookkeeping for maintaining it. The rewrite table reuses the app struct, and the entire set of app selectors. As such, some bookeeping code can be shared between the rewrite- and the APP table.

New functions for getting, setting and deleting entries has been added. Apart from operating on the rewrite list, these functions do not emit a DCB_APP_EVENT when the list os modified. The new dcb_getrewr does a lookup based on selector and priority and returns the protocol, so that mappings from priority to protocol, for a given selector and ifindex is obtained.

Quoted 6 lines

Also, a new nested attribute has been added, that encapsulates one or more app structs. This attribute is used to distinguish the two tables.

The dcb_lock used for the APP table is reused for the rewrite table.

author maintainer
#7 lore raw

PATCH v3 4/6 net: dcb: add helper functions to retrieve PCP and DSCP rewrite maps

In reply to Daniel Machon

Add two new helper functions to retrieve a mapping of priority to PCP and DSCP bitmasks, where each bitmap contains ones in positions that match a rewrite entry.

dcb_ieee_getrewr_prio_dscp_mask_map() reuses the dcb_ieee_app_prio_map, as this struct is already used for a similar mapping in the app table.

---
 include/net/dcbnl.h | 10 +++++++++
 net/dcb/dcbnl.c     | 52 +++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 62 insertions(+)
include/net/dcbnl.h +10 -0
index fe7dfb8bcb5b..42207fc44660 100644
@@ -29,12 +29,22 @@ int dcb_ieee_setapp(struct net_device *, struct dcb_app *);
 int dcb_ieee_delapp(struct net_device *, struct dcb_app *);
 u8 dcb_ieee_getapp_mask(struct net_device *, struct dcb_app *);
 
+struct dcb_rewr_prio_pcp_map {
+	u16 map[IEEE_8021QAZ_MAX_TCS];
+};
+
+void dcb_getrewr_prio_pcp_mask_map(const struct net_device *dev,
+				   struct dcb_rewr_prio_pcp_map *p_map);
+
 struct dcb_ieee_app_prio_map {
 	u64 map[IEEE_8021QAZ_MAX_TCS];
 };
 void dcb_ieee_getapp_prio_dscp_mask_map(const struct net_device *dev,
 					struct dcb_ieee_app_prio_map *p_map);
 
+void dcb_getrewr_prio_dscp_mask_map(const struct net_device *dev,
+				    struct dcb_ieee_app_prio_map *p_map);
+
 struct dcb_ieee_app_dscp_map {
 	u8 map[64];
 };
net/dcb/dcbnl.c +52 -0

58 lines not on this page · raw message

Signature · 1 line
2.34.1
Reviewed-by on v3 4/6
#8 lore raw

Re: [PATCH net-next v3 4/6] net: dcb: add helper functions to retrieve PCP and DSCP rewrite maps

Quoted 8 lines · Daniel Machon

Add two new helper functions to retrieve a mapping of priority to PCP and DSCP bitmasks, where each bitmap contains ones in positions that match a rewrite entry.

dcb_ieee_getrewr_prio_dscp_mask_map() reuses the dcb_ieee_app_prio_map, as this struct is already used for a similar mapping in the app table.

author maintainer
#9 lore raw

PATCH v3 5/6 net: microchip: sparx5: add support for PCP rewrite

In reply to Daniel Machon

Add support for rewrite of PCP and DEI, based on classified Quality of Service (QoS) class and Drop-Precedence (DP) level.

The DCB rewrite table is queried for mappings between priority and PCP/DEI. The classified DP level is then encoded in the DEI bit, if a mapping for DEI exists.

Sparx5 has four DP levels, where by default, 0 is mapped to DE0 and 1-3 are mapped to DE1. If a mapping exists where DEI=1, then all classified DP levels mapped to DE1 will set the DEI bit. The other way around for DEI=0. Effectively, this means that the tagged DEI bit will reflect the DP level for any mappings where DEI=1.

Map priority=1 to PCP=1 and DEI=1:

$ dcb rewr add dev eth0 pcp-prio 1:1de

Map priority=7 to PCP=2 and DEI=0

$ dcb rewr add dev eth0 pcp-prio 7:2nd

Also, sparx5_dcb_ieee_dscp_setdel() has been refactored, to work for both APP and rewrite entries.

---
 .../ethernet/microchip/sparx5/sparx5_dcb.c    | 86 ++++++++++++++++---
 .../microchip/sparx5/sparx5_main_regs.h       | 44 +++++++++-
 .../ethernet/microchip/sparx5/sparx5_port.c   | 57 ++++++++++++
 .../ethernet/microchip/sparx5/sparx5_port.h   | 18 ++++
 4 files changed, 191 insertions(+), 14 deletions(-)
drivers/net/ethernet/microchip/sparx5/sparx5_dcb.c +74 -12
index 74abb946b2a3..dd321dd9f223 100644
@@ -133,12 +133,14 @@ static bool sparx5_dcb_apptrust_contains(int portno, u8 selector)
 
 static int sparx5_dcb_app_update(struct net_device *dev)
 {
+	struct dcb_rewr_prio_pcp_map pcp_rewr_map = {0};
 	struct sparx5_port *port = netdev_priv(dev);
 	struct sparx5_port_qos_dscp_map *dscp_map;
 	struct sparx5_port_qos_pcp_map *pcp_map;
 	struct sparx5_port_qos qos = {0};
 	struct dcb_app app_itr = {0};
 	int portno = port->portno;
+	bool pcp_rewr = false;
 	int i;
 
 	dscp_map = &qos.dscp.map;
@@ -163,10 +165,24 @@ static int sparx5_dcb_app_update(struct net_device *dev)
 		pcp_map->map[i] = dcb_getapp(dev, &app_itr);
 	}
 
+	/* Get pcp rewrite mapping */
+	dcb_getrewr_prio_pcp_mask_map(dev, &pcp_rewr_map);
+	for (i = 0; i < ARRAY_SIZE(pcp_rewr_map.map); i++) {
+		if (!pcp_rewr_map.map[i])
+			continue;
+		pcp_rewr = true;
+		qos.pcp_rewr.map.map[i] = fls(pcp_rewr_map.map[i]) - 1;
+	}
+
 	/* Enable use of pcp for queue classification ? */
 	if (sparx5_dcb_apptrust_contains(portno, DCB_APP_SEL_PCP)) {
 		qos.pcp.qos_enable = true;
 		qos.pcp.dp_enable = qos.pcp.qos_enable;
+		/* Enable rewrite of PCP and DEI if PCP is trusted *and* rewrite
+		 * table is not empty.
+		 */
+		if (pcp_rewr)
+			qos.pcp_rewr.enable = true;
 	}
 
 	/* Enable use of dscp for queue classification ? */
@@ -178,16 +194,17 @@ static int sparx5_dcb_app_update(struct net_device *dev)
 	return sparx5_port_qos_set(port, &qos);
 }
 
-/* Set or delete dscp app entry.
+/* Set or delete DSCP app entry.
  *
- * Dscp mapping is global for all ports, so set and delete app entries are
+ * DSCP mapping is global for all ports, so set and delete app entries are
  * replicated for each port.
  */
-static int sparx5_dcb_ieee_dscp_setdel_app(struct net_device *dev,
-					   struct dcb_app *app, bool del)
+static int sparx5_dcb_ieee_dscp_setdel(struct net_device *dev,
+				       struct dcb_app *app,
+				       int (*setdel)(struct net_device *,
+						     struct dcb_app *))
 {
 	struct sparx5_port *port = netdev_priv(dev);
-	struct dcb_app apps[SPX5_PORTS];
 	struct sparx5_port *port_itr;
 	int err, i;
 
@@ -195,11 +212,7 @@ static int sparx5_dcb_ieee_dscp_setdel_app(struct net_device *dev,
 		port_itr = port->sparx5->ports[i];
 		if (!port_itr)
 			continue;
-		memcpy(&apps[i], app, sizeof(struct dcb_app));
-		if (del)
-			err = dcb_ieee_delapp(port_itr->ndev, &apps[i]);
-		else
-			err = dcb_ieee_setapp(port_itr->ndev, &apps[i]);
+		err = setdel(port_itr->ndev, app);
 		if (err)
 			return err;
 	}
@@ -226,7 +239,7 @@ static int sparx5_dcb_ieee_setapp(struct net_device *dev, struct dcb_app *app)
 	}
 
 	if (app->selector == IEEE_8021QAZ_APP_SEL_DSCP)
-		err = sparx5_dcb_ieee_dscp_setdel_app(dev, app, false);
+		err = sparx5_dcb_ieee_dscp_setdel(dev, app, dcb_ieee_setapp);
 	else
 		err = dcb_ieee_setapp(dev, app);
 
@@ -244,7 +257,7 @@ static int sparx5_dcb_ieee_delapp(struct net_device *dev, struct dcb_app *app)
 	int err;
 
 	if (app->selector == IEEE_8021QAZ_APP_SEL_DSCP)
-		err = sparx5_dcb_ieee_dscp_setdel_app(dev, app, true);
+		err = sparx5_dcb_ieee_dscp_setdel(dev, app, dcb_ieee_delapp);
 	else
 		err = dcb_ieee_delapp(dev, app);
 
@@ -283,11 +296,60 @@ static int sparx5_dcb_getapptrust(struct net_device *dev, u8 *selectors,
 	return 0;
 }
 
+static int sparx5_dcb_delrewr(struct net_device *dev, struct dcb_app *app)
+{
+	int err;
+
+	if (app->selector == IEEE_8021QAZ_APP_SEL_DSCP)
+		err = sparx5_dcb_ieee_dscp_setdel(dev, app, dcb_delrewr);
+	else
+		err = dcb_delrewr(dev, app);
+
+	if (err < 0)
+		return err;
+
+	return sparx5_dcb_app_update(dev);
+}
+
+static int sparx5_dcb_setrewr(struct net_device *dev, struct dcb_app *app)
+{
+	struct dcb_app app_itr;
+	int err = 0;
+	u16 proto;
+
+	err = sparx5_dcb_app_validate(dev, app);
+	if (err)
+		goto out;
+
+	/* Delete current mapping, if it exists. */
+	proto = dcb_getrewr(dev, app);
+	if (proto) {
+		app_itr = *app;
+		app_itr.protocol = proto;
+		sparx5_dcb_delrewr(dev, &app_itr);
+	}
+
+	if (app->selector == IEEE_8021QAZ_APP_SEL_DSCP)
+		err = sparx5_dcb_ieee_dscp_setdel(dev, app, dcb_setrewr);
+	else
+		err = dcb_setrewr(dev, app);
+
+	if (err)
+		goto out;
+
+	sparx5_dcb_app_update(dev);
+
+out:
+	return err;
+}
+
 const struct dcbnl_rtnl_ops sparx5_dcbnl_ops = {
 	.ieee_setapp = sparx5_dcb_ieee_setapp,
 	.ieee_delapp = sparx5_dcb_ieee_delapp,
 	.dcbnl_setapptrust = sparx5_dcb_setapptrust,
 	.dcbnl_getapptrust = sparx5_dcb_getapptrust,
+	.dcbnl_setrewr = sparx5_dcb_setrewr,
+	.dcbnl_delrewr = sparx5_dcb_delrewr,
 };
 
 int sparx5_dcb_init(struct sparx5 *sparx5)
drivers/net/ethernet/microchip/sparx5/sparx5_main_regs.h +42 -2

56 lines not on this page · raw message

drivers/net/ethernet/microchip/sparx5/sparx5_port.c +57 -0

68 lines not on this page · raw message

drivers/net/ethernet/microchip/sparx5/sparx5_port.h +18 -0
index fbafe22e25cc..b09c09d10a16 100644
@@ -9,6 +9,11 @@
 
 #include "sparx5_main.h"
 
+/* Port PCP rewrite mode */
+#define SPARX5_PORT_REW_TAG_CTRL_CLASSIFIED 0
+#define SPARX5_PORT_REW_TAG_CTRL_DEFAULT 1
+#define SPARX5_PORT_REW_TAG_CTRL_MAPPED  2
+
 static inline bool sparx5_port_is_2g5(int portno)
 {
 	return portno >= 16 && portno <= 47;
@@ -99,6 +104,10 @@ struct sparx5_port_qos_pcp_map {
 	u8 map[SPARX5_PORT_QOS_PCP_DEI_COUNT];
 };
 
+struct sparx5_port_qos_pcp_rewr_map {
+	u16 map[SPX5_PRIOS];
+};
+
 #define SPARX5_PORT_QOS_DSCP_COUNT 64
 struct sparx5_port_qos_dscp_map {
 	u8 map[SPARX5_PORT_QOS_DSCP_COUNT];
@@ -110,6 +119,11 @@ struct sparx5_port_qos_pcp {
 	bool dp_enable;
 };
 
+struct sparx5_port_qos_pcp_rewr {
+	struct sparx5_port_qos_pcp_rewr_map map;
+	bool enable;
+};
+
 struct sparx5_port_qos_dscp {
 	struct sparx5_port_qos_dscp_map map;
 	bool qos_enable;
@@ -118,6 +132,7 @@ struct sparx5_port_qos_dscp {
 
 struct sparx5_port_qos {
 	struct sparx5_port_qos_pcp pcp;
+	struct sparx5_port_qos_pcp_rewr pcp_rewr;
 	struct sparx5_port_qos_dscp dscp;
 	u8 default_prio;
 };
@@ -127,6 +142,9 @@ int sparx5_port_qos_set(struct sparx5_port *port, struct sparx5_port_qos *qos);
 int sparx5_port_qos_pcp_set(const struct sparx5_port *port,
 			    struct sparx5_port_qos_pcp *qos);
 
+int sparx5_port_qos_pcp_rewr_set(const struct sparx5_port *port,
+				 struct sparx5_port_qos_pcp_rewr *qos);
+
 int sparx5_port_qos_dscp_set(const struct sparx5_port *port,
 			     struct sparx5_port_qos_dscp *qos);
 
Signature · 1 line
2.34.1
author maintainer
#10 lore raw

PATCH v3 6/6 net: microchip: sparx5: add support for DSCP rewrite

In reply to Daniel Machon

Add support for DSCP rewrite in Sparx5 driver. On egress DSCP is rewritten from either classified DSCP, or frame DSCP. Classified DSCP is determined by the Analyzer Classifier on ingress, and is mapped from classified QoS class and DP level. Classification of DSCP is by default enabled for all ports.

It is required that DSCP is trusted for the egress port *and* rewrite table is not empty, in order to rewrite DSCP based on classified DSCP, otherwise DSCP is always rewritten from frame DSCP.

classified_dscp = qos_dscp_map[8 * dp_level + qos_class]; if (active_mappings && dscp_is_trusted)
rewritten_dscp = classified_dscp
else
rewritten_dscp = frame_dscp

To rewrite DSCP to 20 for any frames with priority 7:

$ dcb apptrust set dev eth0 order dscp
$ dcb rewr add dev eth0 7:20 <-- not in iproute2/dcb yet
---
 .../ethernet/microchip/sparx5/sparx5_dcb.c    | 35 ++++++++++++++++
 .../microchip/sparx5/sparx5_main_regs.h       | 26 ++++++++++++
 .../ethernet/microchip/sparx5/sparx5_port.c   | 40 +++++++++++++++++++
 .../ethernet/microchip/sparx5/sparx5_port.h   | 23 +++++++++++
 4 files changed, 124 insertions(+)
drivers/net/ethernet/microchip/sparx5/sparx5_dcb.c +35 -0
index dd321dd9f223..871a3e62f852 100644
@@ -133,6 +133,7 @@ static bool sparx5_dcb_apptrust_contains(int portno, u8 selector)
 
 static int sparx5_dcb_app_update(struct net_device *dev)
 {
+	struct dcb_ieee_app_prio_map dscp_rewr_map = {0};
 	struct dcb_rewr_prio_pcp_map pcp_rewr_map = {0};
 	struct sparx5_port *port = netdev_priv(dev);
 	struct sparx5_port_qos_dscp_map *dscp_map;
@@ -140,7 +141,9 @@ static int sparx5_dcb_app_update(struct net_device *dev)
 	struct sparx5_port_qos qos = {0};
 	struct dcb_app app_itr = {0};
 	int portno = port->portno;
+	bool dscp_rewr = false;
 	bool pcp_rewr = false;
+	u16 dscp;
 	int i;
 
 	dscp_map = &qos.dscp.map;
@@ -174,6 +177,26 @@ static int sparx5_dcb_app_update(struct net_device *dev)
 		qos.pcp_rewr.map.map[i] = fls(pcp_rewr_map.map[i]) - 1;
 	}
 
+	/* Get dscp rewrite mapping */
+	dcb_getrewr_prio_dscp_mask_map(dev, &dscp_rewr_map);
+	for (i = 0; i < ARRAY_SIZE(dscp_rewr_map.map); i++) {
+		if (!dscp_rewr_map.map[i])
+			continue;
+
+		/* The rewrite table of the switch has 32 entries; one for each
+		 * priority for each DP level. Currently, the rewrite map does
+		 * not indicate DP level, so we map classified QoS class to
+		 * classified DSCP, for each classified DP level. Rewrite of
+		 * DSCP is only enabled, if we have active mappings.
+		 */
+		dscp_rewr = true;
+		dscp = fls64(dscp_rewr_map.map[i]) - 1;
+		qos.dscp_rewr.map.map[i] = dscp;      /* DP 0 */
+		qos.dscp_rewr.map.map[i + 8] = dscp;  /* DP 1 */
+		qos.dscp_rewr.map.map[i + 16] = dscp; /* DP 2 */
+		qos.dscp_rewr.map.map[i + 24] = dscp; /* DP 3 */
+	}
+
 	/* Enable use of pcp for queue classification ? */
 	if (sparx5_dcb_apptrust_contains(portno, DCB_APP_SEL_PCP)) {
 		qos.pcp.qos_enable = true;
@@ -189,6 +212,12 @@ static int sparx5_dcb_app_update(struct net_device *dev)
 	if (sparx5_dcb_apptrust_contains(portno, IEEE_8021QAZ_APP_SEL_DSCP)) {
 		qos.dscp.qos_enable = true;
 		qos.dscp.dp_enable = qos.dscp.qos_enable;
+		if (dscp_rewr)
+			/* Do not enable rewrite if no mappings are active, as
+			 * classified DSCP will then be zero for all classified
+			 * QoS class and DP combinations.
+			 */
+			qos.dscp_rewr.enable = true;
 	}
 
 	return sparx5_port_qos_set(port, &qos);
@@ -366,6 +395,12 @@ int sparx5_dcb_init(struct sparx5 *sparx5)
 		sparx5_port_apptrust[port->portno] =
 			&sparx5_dcb_apptrust_policies
 				[SPARX5_DCB_APPTRUST_DSCP_PCP];
+
+		/* Enable DSCP classification based on classified QoS class and
+		 * DP, for all DSCP values, for all ports.
+		 */
+		sparx5_port_qos_dscp_rewr_mode_set(port,
+						   SPARX5_PORT_REW_DSCP_ALL);
 	}
 
 	return 0;
drivers/net/ethernet/microchip/sparx5/sparx5_main_regs.h +26 -0
index 0d3bf2e84102..a4a4d893dcb2 100644
@@ -885,6 +885,16 @@ enum sparx5_target {
 #define ANA_CL_DSCP_CFG_DSCP_TRUST_ENA_GET(x)\
 	FIELD_GET(ANA_CL_DSCP_CFG_DSCP_TRUST_ENA, x)
 
+/*      ANA_CL:COMMON:QOS_MAP_CFG */
+#define ANA_CL_QOS_MAP_CFG(r) \
+	__REG(TARGET_ANA_CL, 0, 1, 166912, 0, 1, 756, 512, r, 32, 4)
+
+#define ANA_CL_QOS_MAP_CFG_DSCP_REWR_VAL         GENMASK(9, 4)
+#define ANA_CL_QOS_MAP_CFG_DSCP_REWR_VAL_SET(x)\
+	FIELD_PREP(ANA_CL_QOS_MAP_CFG_DSCP_REWR_VAL, x)
+#define ANA_CL_QOS_MAP_CFG_DSCP_REWR_VAL_GET(x)\
+	FIELD_GET(ANA_CL_QOS_MAP_CFG_DSCP_REWR_VAL, x)
+
 /*      ANA_L2:COMMON:AUTO_LRN_CFG */
 #define ANA_L2_AUTO_LRN_CFG       __REG(TARGET_ANA_L2, 0, 1, 566024, 0, 1, 700, 24, 0, 1, 4)
 
@@ -5385,6 +5395,22 @@ enum sparx5_target {
 #define REW_DEI_MAP_DE1_DEI_DE1_GET(x)\
 	FIELD_GET(REW_DEI_MAP_DE1_DEI_DE1, x)
 
+/*      REW:PORT:DSCP_MAP */
+#define REW_DSCP_MAP(g) \
+	__REG(TARGET_REW, 0, 1, 360448, g, 70, 256, 136, 0, 1, 4)
+
+#define REW_DSCP_MAP_DSCP_UPDATE_ENA             BIT(1)
+#define REW_DSCP_MAP_DSCP_UPDATE_ENA_SET(x)\
+	FIELD_PREP(REW_DSCP_MAP_DSCP_UPDATE_ENA, x)
+#define REW_DSCP_MAP_DSCP_UPDATE_ENA_GET(x)\
+	FIELD_GET(REW_DSCP_MAP_DSCP_UPDATE_ENA, x)
+
+#define REW_DSCP_MAP_DSCP_REMAP_ENA              BIT(0)
+#define REW_DSCP_MAP_DSCP_REMAP_ENA_SET(x)\
+	FIELD_PREP(REW_DSCP_MAP_DSCP_REMAP_ENA, x)
+#define REW_DSCP_MAP_DSCP_REMAP_ENA_GET(x)\
+	FIELD_GET(REW_DSCP_MAP_DSCP_REMAP_ENA, x)
+
 /*      REW:PORT:TAG_CTRL */
 #define REW_TAG_CTRL(g)           __REG(TARGET_REW, 0, 1, 360448, g, 70, 256, 132, 0, 1, 4)
 
drivers/net/ethernet/microchip/sparx5/sparx5_port.c +40 -0
index c8b5087769ed..246259b2ae94 100644
@@ -1152,6 +1152,7 @@ int sparx5_port_qos_set(struct sparx5_port *port,
 	sparx5_port_qos_dscp_set(port, &qos->dscp);
 	sparx5_port_qos_pcp_set(port, &qos->pcp);
 	sparx5_port_qos_pcp_rewr_set(port, &qos->pcp_rewr);
+	sparx5_port_qos_dscp_rewr_set(port, &qos->dscp_rewr);
 	sparx5_port_qos_default_set(port, qos);
 
 	return 0;
@@ -1241,6 +1242,45 @@ int sparx5_port_qos_pcp_set(const struct sparx5_port *port,
 	return 0;
 }
 
+void sparx5_port_qos_dscp_rewr_mode_set(const struct sparx5_port *port,
+					int mode)
+{
+	spx5_rmw(ANA_CL_QOS_CFG_DSCP_REWR_MODE_SEL_SET(mode),
+		 ANA_CL_QOS_CFG_DSCP_REWR_MODE_SEL, port->sparx5,
+		 ANA_CL_QOS_CFG(port->portno));
+}
+
+int sparx5_port_qos_dscp_rewr_set(const struct sparx5_port *port,
+				  struct sparx5_port_qos_dscp_rewr *qos)
+{
+	struct sparx5 *sparx5 = port->sparx5;
+	bool rewr = false;
+	u16 dscp;
+	int i;
+
+	/* On egress, rewrite DSCP value to either classified DSCP or frame
+	 * DSCP. If enabled; classified DSCP, if disabled; frame DSCP.
+	 */
+	if (qos->enable)
+		rewr = true;
+
+	spx5_rmw(REW_DSCP_MAP_DSCP_UPDATE_ENA_SET(rewr),
+		 REW_DSCP_MAP_DSCP_UPDATE_ENA, sparx5,
+		 REW_DSCP_MAP(port->portno));
+
+	/* On ingress, map each classified QoS class and DP to classified DSCP
+	 * value. This mapping table is global for all ports.
+	 */
+	for (i = 0; i < ARRAY_SIZE(qos->map.map); i++) {
+		dscp = qos->map.map[i];
+		spx5_rmw(ANA_CL_QOS_MAP_CFG_DSCP_REWR_VAL_SET(dscp),
+			 ANA_CL_QOS_MAP_CFG_DSCP_REWR_VAL, sparx5,
+			 ANA_CL_QOS_MAP_CFG(i));
+	}
+
+	return 0;
+}
+
 int sparx5_port_qos_dscp_set(const struct sparx5_port *port,
 			     struct sparx5_port_qos_dscp *qos)
 {
drivers/net/ethernet/microchip/sparx5/sparx5_port.h +23 -0
index b09c09d10a16..607c4ff1df6b 100644
@@ -14,6 +14,12 @@
 #define SPARX5_PORT_REW_TAG_CTRL_DEFAULT 1
 #define SPARX5_PORT_REW_TAG_CTRL_MAPPED  2
 
+/* Port DSCP rewrite mode */
+#define SPARX5_PORT_REW_DSCP_NONE 0
+#define SPARX5_PORT_REW_DSCP_IF_ZERO 1
+#define SPARX5_PORT_REW_DSCP_SELECTED  2
+#define SPARX5_PORT_REW_DSCP_ALL 3
+
 static inline bool sparx5_port_is_2g5(int portno)
 {
 	return portno >= 16 && portno <= 47;
@@ -108,6 +114,11 @@ struct sparx5_port_qos_pcp_rewr_map {
 	u16 map[SPX5_PRIOS];
 };
 
+#define SPARX5_PORT_QOS_DP_NUM 4
+struct sparx5_port_qos_dscp_rewr_map {
+	u16 map[SPX5_PRIOS * SPARX5_PORT_QOS_DP_NUM];
+};
+
 #define SPARX5_PORT_QOS_DSCP_COUNT 64
 struct sparx5_port_qos_dscp_map {
 	u8 map[SPARX5_PORT_QOS_DSCP_COUNT];
@@ -130,10 +141,16 @@ struct sparx5_port_qos_dscp {
 	bool dp_enable;
 };
 
+struct sparx5_port_qos_dscp_rewr {
+	struct sparx5_port_qos_dscp_rewr_map map;
+	bool enable;
+};
+
 struct sparx5_port_qos {
 	struct sparx5_port_qos_pcp pcp;
 	struct sparx5_port_qos_pcp_rewr pcp_rewr;
 	struct sparx5_port_qos_dscp dscp;
+	struct sparx5_port_qos_dscp_rewr dscp_rewr;
 	u8 default_prio;
 };
 
@@ -148,6 +165,12 @@ int sparx5_port_qos_pcp_rewr_set(const struct sparx5_port *port,
 int sparx5_port_qos_dscp_set(const struct sparx5_port *port,
 			     struct sparx5_port_qos_dscp *qos);
 
+void sparx5_port_qos_dscp_rewr_mode_set(const struct sparx5_port *port,
+					int mode);
+
+int sparx5_port_qos_dscp_rewr_set(const struct sparx5_port *port,
+				  struct sparx5_port_qos_dscp_rewr *qos);
+
 int sparx5_port_qos_default_set(const struct sparx5_port *port,
 				const struct sparx5_port_qos *qos);
 
Signature · 1 line
2.34.1
#11 lore raw
In reply to Daniel Machon
This series was applied to netdev/net-next.git (master) by David S. Miller <[email protected]>:

Hello:

This series was applied to netdev/net-next.git (master) by David S. Miller <[email protected]>:

Quoted 8 lines · On Wed, 18 Jan 2023 22:08:24 +0100 you wrote:

There is currently no support for per-port egress mapping of priority to PCP and priority to DSCP. Some support for expressing egress mapping of PCP is supported through ip link, with the 'egress-qos-map', however this command only maps priority to PCP, and for vlan interfaces only. DCB APP already has support for per-port ingress mapping of PCP/DEI, DSCP and a bunch of other stuff. So why not take advantage of this fact, and add a new table that does the reverse.

[...]

Here is the summary with links:
- [net-next,v3,1/6] net: dcb: modify dcb_app_add to take list_head ptr as parameter

    https://git.kernel.org/netdev/net-next/c/34b7074d3fba
  - [net-next,v3,2/6] net: dcb: add new common function for set/del of app/rewr entries
    https://git.kernel.org/netdev/net-next/c/30568334b657
  - [net-next,v3,3/6] net: dcb: add new rewrite table
    https://git.kernel.org/netdev/net-next/c/622f1b2fae2e
  - [net-next,v3,4/6] net: dcb: add helper functions to retrieve PCP and DSCP rewrite maps
    https://git.kernel.org/netdev/net-next/c/1df99338e6d4
  - [net-next,v3,5/6] net: microchip: sparx5: add support for PCP rewrite
    https://git.kernel.org/netdev/net-next/c/2234879f4ca1
  - [net-next,v3,6/6] net: microchip: sparx5: add support for DSCP rewrite
    https://git.kernel.org/netdev/net-next/c/246c77f666b4

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html