power: act8846_pmic: fix number of registers
PATCH 1/1 power: act8846_pmic: fix number of registers
The highest register on ACT8846 is 0xf5, so set the number of registers to 0xf6, ensuring that the pmic read/write commands are able to access all of the supported registers (and many that are not valid, since the register space is quite sparse).
--- include/power/act8846_pmic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/power/act8846_pmic.h +1 -1
@@ -9,7 +9,7 @@#include <asm/gpio.h> -#define ACT8846_NUM_OF_REGS 12 +#define ACT8846_NUM_OF_REGS 0xf6#define BUCK_VOL_MASK 0x3f#define LDO_VOL_MASK 0x3f
Signature · 1 line
2.39.1
Quoted 11 lines · John Keeping
The highest register on ACT8846 is
0xf5, so set the number of registers to0xf6, ensuring that the pmic read/write commands are able to access all of the supported registers (and many that are not valid, since the register space is quite sparse).Signed-off-by John Keeping <[email protected]>--- include/power/act8846_pmic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Quoted 6 lines · John Keeping
The highest register on ACT8846 is
0xf5, so set the number of registers to0xf6, ensuring that the pmic read/write commands are able to access all of the supported registers (and many that are not valid, since the register space is quite sparse).Signed-off-by John Keeping <[email protected]>
Best Regards,
Jaehoon Chung
Quoted 17 lines
--- include/power/act8846_pmic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)include/power/act8846_pmic.h +1
-1@@ -9,7 +9,7 @@#include <asm/gpio.h> -#define ACT8846_NUM_OF_REGS 12 +#define ACT8846_NUM_OF_REGS 0xf6#define BUCK_VOL_MASK 0x3f#define LDO_VOL_MASK 0x3f