Enable cpumasks to be used as kptrs
Subsystems (5)
cover Enable cpumasks to be used as kptrs
'struct cpumask' is a bitmap data structure in the kernel whose indices reflect the CPUs on the system. Commonly, cpumasks are used to track which CPUs a task is affinitized to, but they can also be used to e.g. track which cores are associated with a scheduling domain, which cores on a machine are idle, etc.
It would be useful to be able to query those cpumasks from BPF programs. For example, when tracing percpu operations, it would be convenient to have cpumask support if the tracing program wants to track which tasks end up running on which CPUs in different time intervals, and to check their cpumask distribution while doing so. Similarly, if we're tracking NUMA allocations, CPU scheduling domain associations, etc, it would be useful to be able to concretely compare decisions made by the kernel to a task's cpumask.
So as to enable such use cases, this patch set proposes a set of kfuncs, namespaced to bpf_cpumask_*, which allow BPF programs to make queries against cpumasks, and to allocate and store them as kptrs.
In order to enable these kfuncs, this patch set adds two new kfunc-related capabilities to the verifier:
1. Defining a mechanism that allows developers to specify which fields of a struct type should inherit their parent's trust. Specifically, we specify that the 'const cpumask_t *cpus_ptr' field will be considered trusted if the parent struct task_struct is trusted.
2. Allowing KF_TRUSTED_ARGS pointers to be walked to see if a BTF type is equivalent to what a kfunc requires. For example, the patch set defines the following type:
struct bpf_cpumask {
cpumask_t cpumask;
refcount_t usage;
}; cpumask_t typedefs a struct cpumask, so if a BPF program has a trusted pointer to a struct bpf_cpumask, it would therefore be safe to pass that to a kfunc expecting a const struct cpumask *. Note that
3. Updating the verifier to prevent NULL PTR_TO_MEM pointers to be passed to KF_TRUSTED_ARGS kfuncs. Without this, a kfunc may crash if it's given a pointer to what it thinks is a scalar struct, but in reality is an address. For example, a bitmap embedded in a cpumask_t.
Following these BPF verifier changes (and their associated selftest additions), this patchset adds a set of cpumask kfuncs in kernel/bpf/cpumask.c, and then tests and documents them.
Lastly, note that some of the kfuncs that were added would benefit from additional verification logic. For example, any kfunc taking a CPU argument that exceeds the number of CPUs on the system, etc. For now, we silently check for and ignore these cases at runtime. When we have e.g. per-argument kfunc flags, it might be helpful to add another KF_CPU-type flag that specifies that the verifier should validate that it's a valid CPU.
David Vernet (8):
bpf: Enable annotating trusted nested pointers
bpf: Allow trusted args to walk struct when checking BTF IDs
bpf: Disallow NULL PTR_TO_MEM for trusted kfuncs
bpf: Enable cpumasks to be queried and used as kptrs selftests/bpf: Add nested trust selftests suite selftests/bpf: Add selftest suite for cpumask kfuncs bpf/docs: Document cpumask kfuncs in a new file bpf/docs: Document how nested trusted fields may be defined
Documentation/bpf/cpumasks.rst | 353 +++++++++++++ Documentation/bpf/index.rst | 1 + Documentation/bpf/kfuncs.rst | 26 +- include/linux/bpf.h | 4 + kernel/bpf/Makefile | 1 + kernel/bpf/btf.c | 64 ++- kernel/bpf/cpumask.c | 476 ++++++++++++++++++ kernel/bpf/verifier.c | 67 ++- tools/testing/selftests/bpf/DENYLIST.s390x | 2 + .../selftests/bpf/prog_tests/cpumask.c | 74 +++ .../selftests/bpf/prog_tests/nested_trust.c | 64 +++ .../selftests/bpf/progs/cpumask_common.h | 114 +++++ .../selftests/bpf/progs/cpumask_failure.c | 125 +++++ .../selftests/bpf/progs/cpumask_success.c | 426 ++++++++++++++++ .../selftests/bpf/progs/nested_trust_common.h | 12 + .../bpf/progs/nested_trust_failure.c | 33 ++ .../bpf/progs/nested_trust_success.c | 29 ++ 17 files changed, 1865 insertions(+), 6 deletions(-) create mode 100644 Documentation/bpf/cpumasks.rst create mode 100644 kernel/bpf/cpumask.c create mode 100644 tools/testing/selftests/bpf/prog_tests/cpumask.c create mode 100644 tools/testing/selftests/bpf/prog_tests/nested_trust.c create mode 100644 tools/testing/selftests/bpf/progs/cpumask_common.h create mode 100644 tools/testing/selftests/bpf/progs/cpumask_failure.c create mode 100644 tools/testing/selftests/bpf/progs/cpumask_success.c create mode 100644 tools/testing/selftests/bpf/progs/nested_trust_common.h create mode 100644 tools/testing/selftests/bpf/progs/nested_trust_failure.c create mode 100644 tools/testing/selftests/bpf/progs/nested_trust_success.c
Signature · 1 line
2.39.0
PATCH 1/8 bpf: Enable annotating trusted nested pointers
In kfuncs, a "trusted" pointer is a pointer that the kfunc can assume is safe, and which the verifier will allow to be passed to a KF_TRUSTED_ARGS kfunc. Currently, a KF_TRUSTED_ARGS kfunc disallows any pointer to be passed at a nonzero offset, but sometimes this is in fact safe if the "nested" pointer's lifetime is inherited from its parent. For example, the const cpumask_t *cpus_ptr field in a struct task_struct will remain valid until the task itself is destroyed, and thus would also be safe to pass to a KF_TRUSTED_ARGS kfunc.
While it would be conceptually simple to enable this by using BTF tags, gcc unfortunately does not yet support this. In the interim, this patch enables support for this by using a type-naming convention. A new BTF_TYPE_SAFE_NESTED macro is defined in verifier.c which allows a developer to specify the nested fields of a type which are considered trusted if its parent is also trusted. The verifier is also updated to account for this. A patch with selftests will be added in a follow-on change, along with documentation for this feature.
--- include/linux/bpf.h | 4 +++ kernel/bpf/btf.c | 64 ++++++++++++++++++++++++++++++++++++++++++- kernel/bpf/verifier.c | 32 ++++++++++++++++++++-- 3 files changed, 96 insertions(+), 4 deletions(-)
include/linux/bpf.h +4 -0
@@ -2186,6 +2186,10 @@ struct bpf_core_ctx {const struct btf *btf; }; +bool btf_nested_type_is_trusted (struct bpf_verifier_log *log, +const struct bpf_reg_state *reg, +int off); +int bpf_core_apply (struct bpf_core_ctx *ctx,const struct bpf_core_relo *relo,int relo_idx,void *insn);
kernel/bpf/btf.c +63 -1
79 lines not on this page · raw message
kernel/bpf/verifier.c +29 -3
@@ -4755,6 +4755,25 @@ static int bpf_map_direct_read(struct bpf_map *map, int off, int size, u64 *val)return 0 ; } +#define BTF_TYPE_SAFE_NESTED (__type) __PASTE(__type, __safe_fields) + +BTF_TYPE_SAFE_NESTED(struct task_struct) { +const cpumask_t *cpus_ptr; +}; + +static bool nested_ptr_is_trusted (struct bpf_verifier_env *env, +struct bpf_reg_state *reg, +int off) +{ +/* If its parent is not trusted, it can't regain its trusted status. */ +if (!is_trusted_reg (reg)) +return false; + +BTF_TYPE_EMIT (BTF_TYPE_SAFE_NESTED(struct task_struct )); + +return btf_nested_type_is_trusted (&env->log, reg, off); +} + static int check_ptr_to_btf_access(struct bpf_verifier_env *env, struct bpf_reg_state *regs, int regno, int off, int size,
@@ -4843,10 +4862,17 @@ static int check_ptr_to_btf_access(struct bpf_verifier_env *env,if (type_flag (reg->type) &PTR_UNTRUSTED ) flag |=PTR_UNTRUSTED ; -/* By default any pointer obtained from walking a trusted pointer is -* no longer trusted except the rcu case below. +/* By default any pointer obtained from walking a trusted pointer is no +* longer trusted, unless the field being accessed has explicitly been +* marked as inheriting its parent's state of trust. +* +* An RCU-protected pointer can also be deemed trusted if we are in an +* RCU read region. This case is handled below. */ - flag &= ~PTR_TRUSTED ; +if (nested_ptr_is_trusted (env, reg, off)) + flag |=PTR_TRUSTED ; +else + flag &= ~PTR_TRUSTED ;if (flag &MEM_RCU ) {/* Mark value register as MEM_RCU only if it is protected by
Signature · 1 line
2.39.0
kernel test robot
build botRe: [PATCH bpf-next 1/8] bpf: Enable annotating trusted nested pointers
Thank you for the patch! Perhaps something to improve:
Hi David,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on bpf-next/master]
url: https://github.com/intel-lab-lkp/linux/commits/David-Vernet/bpf-Enable-annotating-trusted-nested-pointers/20230120-080139 base: https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git master patch link: https://lore.kernel.org/r/20230119235833.2948341-2-void%40manifault.com patch subject: [PATCH bpf-next 1/8] bpf: Enable annotating trusted nested pointers config: ia64-allyesconfig (https://download.01.org/0day-ci/archive/20230120/[email protected]/config) compiler: ia64-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/8f6df14342b1be3516f8e21037edf771df851427
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review David-Vernet/bpf-Enable-annotating-trusted-nested-pointers/20230120-080139 git checkout 8f6df14342b1be3516f8e21037edf771df851427
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=ia64 olddefconfig COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=ia64 SHELL=/bin/bash kernel/bpf/
If you fix the issue, kindly add following tag where applicable | Reported-by: kernel test robot <[email protected]>
All warnings (new ones prefixed by >>):
>> kernel/bpf/btf.c:533:5: warning: no previous prototype for 'bpf_find_btf_id' [-Wmissing-prototypes]
533 | s32 bpf_find_btf_id(const char *name, u32 kind, struct btf **btf_p)
| ^~~~~~~~~~~~~~~
kernel/bpf/btf.c: In function 'btf_seq_show':
kernel/bpf/btf.c:6977:29: warning: function 'btf_seq_show' might be a candidate for 'gnu_printf' format attribute [-Wsuggest-attribute=format]
6977 | seq_vprintf((struct seq_file *)show->target, fmt, args);
| ^~~~~~~~
kernel/bpf/btf.c: In function 'btf_snprintf_show':
kernel/bpf/btf.c:7014:9: warning: function 'btf_snprintf_show' might be a candidate for 'gnu_printf' format attribute [-Wsuggest-attribute=format]
7014 | len = vsnprintf(show->target, ssnprintf->len_left, fmt, args);
| ^~~vim +/bpf_find_btf_id +533 kernel/bpf/btf.c
532
> 533 s32 bpf_find_btf_id(const char *name, u32 kind, struct btf **btf_p)
534 {
535 struct btf *btf;
536 s32 ret;
537 int id;
538
539 btf = bpf_get_btf_vmlinux();
540 if (IS_ERR(btf))
541 return PTR_ERR(btf);
542 if (!btf)
543 return -EINVAL;
544
545 ret = btf_find_by_name_kind(btf, name, kind);
546 /* ret is never zero, since btf_find_by_name_kind returns
547 * positive btf_id or negative error.
548 */
549 if (ret > 0) {
550 btf_get(btf);
551 *btf_p = btf;
552 return ret;
553 }
554
555 /* If name is not found in vmlinux's BTF then search in module's BTFs */
556 spin_lock_bh(&btf_idr_lock);
557 idr_for_each_entry(&btf_idr, btf, id) {
558 if (!btf_is_module(btf))
559 continue;
560 /* linear search could be slow hence unlock/lock
561 * the IDR to avoiding holding it for too long
562 */
563 btf_get(btf);
564 spin_unlock_bh(&btf_idr_lock);
565 ret = btf_find_by_name_kind(btf, name, kind);
566 if (ret > 0) {
567 *btf_p = btf;
568 return ret;
569 }
570 spin_lock_bh(&btf_idr_lock);
571 btf_put(btf);
572 }
573 spin_unlock_bh(&btf_idr_lock);
574 return ret;
575 }
576
Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests
Re: [PATCH bpf-next 1/8] bpf: Enable annotating trusted nested pointers
Quoted 24 lines · kernel test robot
Hi David,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on bpf-next/master]
url: https://github.com/intel-lab-lkp/linux/commits/David-Vernet/bpf-Enable-annotating-trusted-nested-pointers/20230120-080139 base: https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git master patch link: https://lore.kernel.org/r/20230119235833.2948341-2-void%40manifault.com patch subject: [PATCH bpf-next 1/8] bpf: Enable annotating trusted nested pointers config: ia64-allyesconfig (https://download.01.org/0day-ci/archive/20230120/[email protected]/config) compiler: ia64-linux-gcc (GCC) 12.1.0reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/8f6df14342b1be3516f8e21037edf771df851427
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review David-Vernet/bpf-Enable-annotating-trusted-nested-pointers/20230120-080139 git checkout8f6df14342b1be3516f8e21037edf771df851427
# save the config file
mkdirbuild_dir&& cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=ia64 olddefconfig COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=ia64 SHELL=/bin/bashkernel/bpf/
Quoted 7 lines
If you fix the issue, kindly add following tag where applicable | Reported-by: kernel test robot <[email protected]>
All warnings (new ones prefixed by >>):
Quoted 1 line
Quoted 1 line
kernel/bpf/btf.c:533:5: warning: no previous prototype for 'bpf_find_btf_id' [-Wmissing-prototypes]533 | s32 bpf_find_btf_id(const char *name, u32 kind, struct btf **btf_p)
Silly mistake on my part. I removed static while debugging something in verifier.c and forgot to put it back. I'll put it back in v2.
Quoted 62 lines
| ^~~~~~~~~~~~~~~ kernel/bpf/btf.c: In function 'btf_seq_show': kernel/bpf/btf.c:6977:29: warning: function 'btf_seq_show' might be a candidate for 'gnu_printf' format attribute [-Wsuggest-attribute=format] 6977 | seq_vprintf((struct seq_file *)show->target, fmt, args); | ^~~~~~~~ kernel/bpf/btf.c: In function 'btf_snprintf_show': kernel/bpf/btf.c:7014:9: warning: function 'btf_snprintf_show' might be a candidate for 'gnu_printf' format attribute [-Wsuggest-attribute=format] 7014 | len = vsnprintf(show->target, ssnprintf->len_left, fmt, args); | ^~~vim +/bpf_find_btf_id +533
kernel/bpf/btf.c532Quoted 1 line
533 s32
bpf_find_btf_id(const char *name, u32 kind, struct btf **btf_p)534 { 535 struct btf *btf; 536 s32 ret; 537 int id; 538 539 btf = bpf_get_btf_vmlinux(); 540 if (IS_ERR(btf)) 541 return PTR_ERR(btf); 542 if (!btf) 543 return -EINVAL; 544 545 ret = btf_find_by_name_kind(btf, name, kind); 546 /* ret is never zero, since btf_find_by_name_kind returns 547 * positive btf_id or negative error. 548 */ 549 if (ret > 0) { 550 btf_get(btf); 551 *btf_p = btf; 552 return ret; 553 } 554 555 /* If name is not found in vmlinux's BTF then search in module's BTFs */ 556 spin_lock_bh(&btf_idr_lock); 557 idr_for_each_entry(&btf_idr, btf, id) { 558 if (!btf_is_module(btf)) 559 continue; 560 /* linear search could be slow hence unlock/lock 561 * the IDR to avoiding holding it for too long 562 */ 563 btf_get(btf); 564 spin_unlock_bh(&btf_idr_lock); 565 ret = btf_find_by_name_kind(btf, name, kind); 566 if (ret > 0) { 567 *btf_p = btf; 568 return ret; 569 } 570 spin_lock_bh(&btf_idr_lock); 571 btf_put(btf); 572 } 573 spin_unlock_bh(&btf_idr_lock); 574 return ret; 575 } 576Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests
kernel test robot
build botRe: [PATCH bpf-next 1/8] bpf: Enable annotating trusted nested pointers
In reply to David VernetThank you for the patch! Perhaps something to improve:
Hi David,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on bpf-next/master]
url: https://github.com/intel-lab-lkp/linux/commits/David-Vernet/bpf-Enable-annotating-trusted-nested-pointers/20230120-080139 base: https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git master patch link: https://lore.kernel.org/r/20230119235833.2948341-2-void%40manifault.com patch subject: [PATCH bpf-next 1/8] bpf: Enable annotating trusted nested pointers config: x86_64-rhel-8.3-rust (https://download.01.org/0day-ci/archive/20230120/[email protected]/config) compiler: clang version 14.0.6 (https://github.com/llvm/llvm-project f28c006a5895fc0e329fe15fead81e37457cb1d1)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/8f6df14342b1be3516f8e21037edf771df851427
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review David-Vernet/bpf-Enable-annotating-trusted-nested-pointers/20230120-080139 git checkout 8f6df14342b1be3516f8e21037edf771df851427
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=x86_64 olddefconfig COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=x86_64 SHELL=/bin/bash kernel/bpf/
If you fix the issue, kindly add following tag where applicable | Reported-by: kernel test robot <[email protected]>
All warnings (new ones prefixed by >>):
>> kernel/bpf/btf.c:533:5: warning: no previous prototype for function 'bpf_find_btf_id' [-Wmissing-prototypes]
s32 bpf_find_btf_id(const char *name, u32 kind, struct btf **btf_p)
^ kernel/bpf/btf.c:533:1: note: declare 'static' if the function is not intended to be used outside of this translation unit s32 bpf_find_btf_id(const char *name, u32 kind, struct btf **btf_p)
^
static
1 warning generated.
vim +/bpf_find_btf_id +533 kernel/bpf/btf.c
532
> 533 s32 bpf_find_btf_id(const char *name, u32 kind, struct btf **btf_p)
534 {
535 struct btf *btf;
536 s32 ret;
537 int id;
538
539 btf = bpf_get_btf_vmlinux();
540 if (IS_ERR(btf))
541 return PTR_ERR(btf);
542 if (!btf)
543 return -EINVAL;
544
545 ret = btf_find_by_name_kind(btf, name, kind);
546 /* ret is never zero, since btf_find_by_name_kind returns
547 * positive btf_id or negative error.
548 */
549 if (ret > 0) {
550 btf_get(btf);
551 *btf_p = btf;
552 return ret;
553 }
554
555 /* If name is not found in vmlinux's BTF then search in module's BTFs */
556 spin_lock_bh(&btf_idr_lock);
557 idr_for_each_entry(&btf_idr, btf, id) {
558 if (!btf_is_module(btf))
559 continue;
560 /* linear search could be slow hence unlock/lock
561 * the IDR to avoiding holding it for too long
562 */
563 btf_get(btf);
564 spin_unlock_bh(&btf_idr_lock);
565 ret = btf_find_by_name_kind(btf, name, kind);
566 if (ret > 0) {
567 *btf_p = btf;
568 return ret;
569 }
570 spin_lock_bh(&btf_idr_lock);
571 btf_put(btf);
572 }
573 spin_unlock_bh(&btf_idr_lock);
574 return ret;
575 }
576
Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests
PATCH 2/8 bpf: Allow trusted args to walk struct when checking BTF IDs
In reply to David VernetWhen validating BTF types for KF_TRUSTED_ARGS kfuncs, the verifier currently enforces that the top-level type must match when calling the kfunc. In other words, the verifier does not allow the BPF program to pass a bitwise equivalent struct, despite it being functionally safe. For example, if you have the following type:
struct nf_conn___init {
struct nf_conn ct;
};It would be safe to pass a struct nf_conn___init to a kfunc expecting a struct nf_conn. Being able to do this will be useful for certain types of kfunc / kptrs enabled by BPF. For example, in a follow-on patch, a series of kfuncs will be added which allow programs to do bitwise queries on cpumasks that are either allocated by the program (in which case they'll be a 'struct bpf_cpumask' type that wraps a cpumask_t as its first element), or a cpumask that was allocated by the main kernel (in which case it will just be a straight cpumask_t, as in
task->cpus_ptr).
Having the two types of cpumasks allows us to distinguish between the two for when a cpumask is read-only vs. mutatable. A struct bpf_cpumask can be mutated by e.g. bpf_cpumask_clear(), whereas a regular cpumask_t cannot be. On the other hand, a struct bpf_cpumask can of course be queried in the exact same manner as a cpumask_t, with e.g. bpf_cpumask_test_cpu().
If we were to enforce that top level types match, then a user that's passing a struct bpf_cpumask to a read-only cpumask_t argument would have to cast with something like bpf_cast_to_kern_ctx() (which itself would need to be updated to expect the alias, and currently it only accommodates a single alias per prog type). Additionally, not specifying KF_TRUSTED_ARGS is not an option, as some kfuncs take one argument as a struct bpf_cpumask *, and another as a struct cpumask * (i.e. cpumask_t).
In order to enable this, this patch relaxes the constraint that a KF_TRUSTED_ARGS kfunc must have strict type matching. In order to try and be conservative and match existing behavior / expectations, this patch also enforces strict type checking for acquire kfuncs. We were already enforcing it for release kfuncs, so this should also improve the consistency of the semantics for kfuncs.
--- kernel/bpf/verifier.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-)
kernel/bpf/verifier.c +26 -1
@@ -8563,9 +8563,34 @@ static int process_kf_arg_ptr_to_btf_id(struct bpf_verifier_env *env, reg_ref_id = *reg2btf_ids[base_type (reg->type)]; } -if (is_kfunc_trusted_args (meta) || (is_kfunc_release (meta) && reg->ref_obj_id)) +/* Enforce strict type matching for calls to kfuncs that are acquiring +* or releasing a reference. We do _not_ enforce strict matching for +* plain KF_TRUSTED_ARGS kfuncs, as we want to enable BPF programs to +* pass types that are bitwise equivalent without forcing them to +* explicitly cast with something like bpf_cast_to_kern_ctx(). +* +* For example, say we had a type like the following: +* +* struct bpf_cpumask { +* cpumask_t cpumask; +* refcount_t usage; +* }; +* +* Note that as specified in <linux/cpumask.h>, cpumask_t is typedef'ed +* to a struct cpumask, so it would be safe to pass a struct +* bpf_cpumask * to a kfunc expecting a struct cpumask *. +* +* The philosophy here is similar to how we allow scalars of different +* types to be passed to kfuncs as long as the size is the same. The +* only difference here is that we're simply allowing +* btf_struct_ids_match() to walk the struct at the 0th offset, and +* resolve types. +*/ +if (is_kfunc_acquire (meta) || (is_kfunc_release (meta) && reg->ref_obj_id)) strict_type_match = true; +WARN_ON_ONCE (is_kfunc_trusted_args (meta) && reg->off); + reg_ref_t =btf_type_skip_modifiers (reg_btf, reg_ref_id, ®_ref_id); reg_ref_tname =btf_name_by_offset (reg_btf, reg_ref_t->name_off);if (!btf_struct_ids_match (&env->log, reg_btf, reg_ref_id, reg->off, meta->btf, ref_id, strict_type_match)) {
Signature · 1 line
2.39.0
Kumar Kartikeya Dwivedi
maintainerRe: [PATCH bpf-next 2/8] bpf: Allow trusted args to walk struct when checking BTF IDs
Quoted 6 lines · David Vernet
When validating BTF types for
KF_TRUSTED_ARGSkfuncs, the verifier currently enforces that the top-level type must match when calling the kfunc. In other words, the verifier does not allow the BPF program to pass a bitwise equivalent struct, despite it being functionally safe. For example, if you have the following type:
Quoted 6 lines
struct nf_conn___init { struct nf_conn ct; };It would be safe to pass a struct
nf_conn___initto a kfunc expecting a structnf_conn.
Just running bpf_nf selftest would have shown this is false.
Quoted 25 lines
Being able to do this will be useful for certain types
of kfunc / kptrs enabled by BPF. For example, in a follow-on patch, a series of kfuncs will be added which allow programs to do bitwise queries on cpumasks that are either allocated by the program (in which case they'll be a 'structbpf_cpumask' type that wraps acpumask_tas its first element), or a cpumask that was allocated by the main kernel (in which case it will just be a straightcpumask_t, as in
task->cpus_ptr).Having the two types of cpumasks allows us to distinguish between the two for when a cpumask is read-only vs. mutatable. A struct
bpf_cpumaskcan be mutated by e.g.bpf_cpumask_clear(), whereas a regularcpumask_tcannot be. On the other hand, a structbpf_cpumaskcan of course be queried in the exact same manner as acpumask_t, with e.g.bpf_cpumask_test_cpu().If we were to enforce that top level types match, then a user that's passing a struct
bpf_cpumaskto a read-onlycpumask_targument would have to cast with something likebpf_cast_to_kern_ctx()(which itself would need to be updated to expect the alias, and currently it only accommodates a single alias per prog type). Additionally, not specifyingKF_TRUSTED_ARGSis not an option, as some kfuncs take one argument as a structbpf_cpumask*, and another as a struct cpumask * (i.e.cpumask_t).
Quoted 7 lines
In order to enable this, this patch relaxes the constraint that a
KF_TRUSTED_ARGSkfunc must have strict type matching. In order to try and be conservative and match existing behavior / expectations, this patch also enforces strict type checking for acquire kfuncs. We were already enforcing it for release kfuncs, so this should also improve the consistency of the semantics for kfuncs.
What you want is to simply follow type at off = 0 (but still enforce the off = 0 requirement). This is something which is currently done for bpf_sk_release (for struct sk_common) in check_reg_type, but it is not safe in general to just open this up for all cases. I suggest encoding this particular requirement in the argument, and simply using triple underscore variant of the type for the special 'read_only' requirement. This will allow you to use same type in your BPF C program, while allowing verifier to see them as two different types in kfunc parameters. Then just relax type following for the particular argument so that one can pass cpumask_t___ro to kfunc expecting cpumask_t (but only at off = 0, it just visits first member after failing match on top level type). off = 0 check is still necessary.
So offset checks still need to be according to OBJ_RELEASE but you can relax strict_type_match bool for the particular arg when calling btf_struct_ids_match.
All code in your tests will then deal with a cpumask_t type only, including in kfunc declarations. Same as bpf_nf selftests which don't cast from/to nf_conn___init and only deal with nf_conn pointers even though semantics differ depending on how it is used and passed around. Overall more convenient and simple to use.
Re: [PATCH bpf-next 2/8] bpf: Allow trusted args to walk struct when checking BTF IDs
Quoted 7 lines · Kumar Kartikeya Dwivedi
Quoted 6 lines · David Vernet
When validating BTF types for
KF_TRUSTED_ARGSkfuncs, the verifier currently enforces that the top-level type must match when calling the kfunc. In other words, the verifier does not allow the BPF program to pass a bitwise equivalent struct, despite it being functionally safe. For example, if you have the following type:
Quoted 8 lines
Quoted 6 lines
struct nf_conn___init { struct nf_conn ct; };It would be safe to pass a struct
nf_conn___initto a kfunc expecting a structnf_conn.Just running
bpf_nfselftest would have shown this is false.
And I feel silly, because I did run them, and could have sworn they passed...looking now at the change_status_after_alloc testcase I see you're of course correct. Very poor example, thank you for pointing it out.
Quoted 34 lines
Quoted 26 lines
Being able to do this will be useful for certain types
of kfunc / kptrs enabled by BPF. For example, in a follow-on patch, a series of kfuncs will be added which allow programs to do bitwise queries on cpumasks that are either allocated by the program (in which case they'll be a 'structbpf_cpumask' type that wraps acpumask_tas its first element), or a cpumask that was allocated by the main kernel (in which case it will just be a straightcpumask_t, as in
task->cpus_ptr).Having the two types of cpumasks allows us to distinguish between the two for when a cpumask is read-only vs. mutatable. A struct
bpf_cpumaskcan be mutated by e.g.bpf_cpumask_clear(), whereas a regularcpumask_tcannot be. On the other hand, a structbpf_cpumaskcan of course be queried in the exact same manner as acpumask_t, with e.g.bpf_cpumask_test_cpu().If we were to enforce that top level types match, then a user that's passing a struct
bpf_cpumaskto a read-onlycpumask_targument would have to cast with something likebpf_cast_to_kern_ctx()(which itself would need to be updated to expect the alias, and currently it only accommodates a single alias per prog type). Additionally, not specifyingKF_TRUSTED_ARGSis not an option, as some kfuncs take one argument as a structbpf_cpumask*, and another as a struct cpumask * (i.e.cpumask_t).Quoted 7 lines
In order to enable this, this patch relaxes the constraint that a
KF_TRUSTED_ARGSkfunc must have strict type matching. In order to try and be conservative and match existing behavior / expectations, this patch also enforces strict type checking for acquire kfuncs. We were already enforcing it for release kfuncs, so this should also improve the consistency of the semantics for kfuncs.
Quoted 11 lines
What you want is to simply follow type at off = 0 (but still enforce the off = 0 requirement). This is something which is currently done for
bpf_sk_release(for structsk_common) incheck_reg_type, but it is not safe in general to just open this up for all cases. I suggest encoding this particular requirement in the argument, and simply using triple underscore variant of the type for the special 'read_only' requirement. This will allow you to use same type in your BPF C program, while allowing verifier to see them as two different types in kfunc parameters. Then just relax type following for the particular argument so that one can passcpumask_t___roto kfunc expectingcpumask_t(but only at off = 0, it just visits first member after failing match on top level type). off = 0 check is still necessary.
Sigh, yeah, another ___ workaround but I agree it's probably the best we can do for now, and in general seems pretty useful. Obviously preferable to this patch which just doesn't work. Alexei, are you OK with this? If so, I'll take this approach for v2.
Quoted 9 lines
So offset checks still need to be according to
OBJ_RELEASEbut you can relaxstrict_type_matchbool for the particular arg when callingbtf_struct_ids_match.All code in your tests will then deal with a
cpumask_ttype only, including in kfunc declarations. Same asbpf_nfselftests which don't cast from/tonf_conn___initand only deal withnf_connpointers even though semantics differ depending on how it is used and passed around. Overall more convenient and simple to use.
Re: [PATCH bpf-next 2/8] bpf: Allow trusted args to walk struct when checking BTF IDs
Quoted 68 lines · David Vernet
Quoted 7 lines · Kumar Kartikeya Dwivedi
Quoted 6 lines · David Vernet
When validating BTF types for
KF_TRUSTED_ARGSkfuncs, the verifier currently enforces that the top-level type must match when calling the kfunc. In other words, the verifier does not allow the BPF program to pass a bitwise equivalent struct, despite it being functionally safe. For example, if you have the following type:Quoted 8 lines
Quoted 6 lines
struct nf_conn___init { struct nf_conn ct; };It would be safe to pass a struct
nf_conn___initto a kfunc expecting a structnf_conn.Just running
bpf_nfselftest would have shown this is false.And I feel silly, because I did run them, and could have sworn they passed...looking now at the
change_status_after_alloctestcase I see you're of course correct. Very poor example, thank you for pointing it out.Quoted 34 lines
Quoted 26 lines
Being able to do this will be useful for certain types
of kfunc / kptrs enabled by BPF. For example, in a follow-on patch, a series of kfuncs will be added which allow programs to do bitwise queries on cpumasks that are either allocated by the program (in which case they'll be a 'structbpf_cpumask' type that wraps acpumask_tas its first element), or a cpumask that was allocated by the main kernel (in which case it will just be a straightcpumask_t, as in
task->cpus_ptr).Having the two types of cpumasks allows us to distinguish between the two for when a cpumask is read-only vs. mutatable. A struct
bpf_cpumaskcan be mutated by e.g.bpf_cpumask_clear(), whereas a regularcpumask_tcannot be. On the other hand, a structbpf_cpumaskcan of course be queried in the exact same manner as acpumask_t, with e.g.bpf_cpumask_test_cpu().If we were to enforce that top level types match, then a user that's passing a struct
bpf_cpumaskto a read-onlycpumask_targument would have to cast with something likebpf_cast_to_kern_ctx()(which itself would need to be updated to expect the alias, and currently it only accommodates a single alias per prog type). Additionally, not specifyingKF_TRUSTED_ARGSis not an option, as some kfuncs take one argument as a structbpf_cpumask*, and another as a struct cpumask * (i.e.cpumask_t).Quoted 7 lines
In order to enable this, this patch relaxes the constraint that a
KF_TRUSTED_ARGSkfunc must have strict type matching. In order to try and be conservative and match existing behavior / expectations, this patch also enforces strict type checking for acquire kfuncs. We were already enforcing it for release kfuncs, so this should also improve the consistency of the semantics for kfuncs.Quoted 11 lines
What you want is to simply follow type at off = 0 (but still enforce the off = 0 requirement). This is something which is currently done for
bpf_sk_release(for structsk_common) incheck_reg_type, but it is not safe in general to just open this up for all cases. I suggest encoding this particular requirement in the argument, and simply using triple underscore variant of the type for the special 'read_only' requirement. This will allow you to use same type in your BPF C program, while allowing verifier to see them as two different types in kfunc parameters. Then just relax type following for the particular argument so that one can passcpumask_t___roto kfunc expectingcpumask_t(but only at off = 0, it just visits first member after failing match on top level type). off = 0 check is still necessary.
Quoted 4 lines
Sigh, yeah, another ___ workaround but I agree it's probably the best we can do for now, and in general seems pretty useful. Obviously preferable to this patch which just doesn't work. Alexei, are you OK with this? If so, I'll take this approach for v2.
We decided to rely on strict type match when we introduced 'struct nf_conn___init', but with that we twisted the C standard to, what looks to be, a wrong direction.
For definition:
struct nf_conn___init {
struct nf_conn ct;
};
if a kfunc accepts a pointer to nf_conn it should always accept a pointer to nf_conn__init for both read and write, because in C that's valid and safe type cast.
We can fix this design issue by saying that '___init' suffix is special and C type casting rules don't apply to it.
In all other cases bpf_cpumask/cpumask would should allow it.
__ro suffix idea will keep moving us into further discrepancies with C.
Kumar Kartikeya Dwivedi
maintainerRe: [PATCH bpf-next 2/8] bpf: Allow trusted args to walk struct when checking BTF IDs
Quoted 78 lines · Alexei Starovoitov
Quoted 68 lines · David Vernet
Quoted 7 lines · Kumar Kartikeya Dwivedi
Quoted 6 lines · David Vernet
When validating BTF types for
KF_TRUSTED_ARGSkfuncs, the verifier currently enforces that the top-level type must match when calling the kfunc. In other words, the verifier does not allow the BPF program to pass a bitwise equivalent struct, despite it being functionally safe. For example, if you have the following type:Quoted 8 lines
Quoted 6 lines
struct
nf_conn___init{
structnf_connct;
};It would be safe to pass a struct
nf_conn___initto a kfunc expecting a structnf_conn.Just running
bpf_nfselftest would have shown this is false.And I feel silly, because I did run them, and could have sworn they passed...looking now at the
change_status_after_alloctestcase I see you're of course correct. Very poor example, thank you for pointing it out.Quoted 34 lines
Quoted 26 lines
Being able to do this will be useful for certain types
of kfunc / kptrs enabled by BPF. For example, in a follow-on patch, a series of kfuncs will be added which allow programs to do bitwise queries on cpumasks that are either allocated by the program (in which case they'll be a 'structbpf_cpumask' type that wraps acpumask_tas its first element), or a cpumask that was allocated by the main kernel (in which case it will just be a straightcpumask_t, as in
task->cpus_ptr).Having the two types of cpumasks allows us to distinguish between the two for when a cpumask is read-only vs. mutatable. A struct
bpf_cpumaskcan be mutated by e.g.bpf_cpumask_clear(), whereas a regularcpumask_tcannot be. On the other hand, a structbpf_cpumaskcan of course be queried in the exact same manner as acpumask_t, with e.g.bpf_cpumask_test_cpu().If we were to enforce that top level types match, then a user that's passing a struct
bpf_cpumaskto a read-onlycpumask_targument would have to cast with something likebpf_cast_to_kern_ctx()(which itself would need to be updated to expect the alias, and currently it only accommodates a single alias per prog type). Additionally, not specifyingKF_TRUSTED_ARGSis not an option, as some kfuncs take one argument as a structbpf_cpumask*, and another as a struct cpumask * (i.e.cpumask_t).Quoted 7 lines
In order to enable this, this patch relaxes the constraint that a
KF_TRUSTED_ARGSkfunc must have strict type matching. In order to try and be conservative and match existing behavior / expectations, this patch also enforces strict type checking for acquire kfuncs. We were already enforcing it for release kfuncs, so this should also improve the consistency of the semantics for kfuncs.Quoted 11 lines
What you want is to simply follow type at off = 0 (but still enforce the off = 0 requirement). This is something which is currently done for
bpf_sk_release(for structsk_common) incheck_reg_type, but it is not safe in general to just open this up for all cases. I suggest encoding this particular requirement in the argument, and simply using triple underscore variant of the type for the special 'read_only' requirement. This will allow you to use same type in your BPF C program, while allowing verifier to see them as two different types in kfunc parameters. Then just relax type following for the particular argument so that one can passcpumask_t___roto kfunc expectingcpumask_t(but only at off = 0, it just visits first member after failing match on top level type). off = 0 check is still necessary.Quoted 4 lines
Sigh, yeah, another ___ workaround but I agree it's probably the best we can do for now, and in general seems pretty useful. Obviously preferable to this patch which just doesn't work. Alexei, are you OK with this? If so, I'll take this approach for v2.
We decided to rely on strict type match when we introduced 'struct
nf_conn___init', but with that we twisted the C standard to, what looks to be, a wrong direction.
Quoted 7 lines
For definition:
struct nf_conn___init { struct nf_conn ct; };if a kfunc accepts a pointer to
nf_connit should always accept a pointer tonf_conn__initfor both read and write, because in C that's valid and safe type cast.
The intention of this nf_conn___init was to be invisible to the user. In selftests there is no trace of nf_conn___init. It is only for enforcing semantics by virtue of type safety in the verifier.
Allocated but not inserted nf_conn -> nf_conn___init Inserted/looked up nf_conn -> nf_conn
We can't pass e.g. nf_conn___init * to a function expecting nf_conn *. The allocated nf_conn may not yet be fully initialized. It is only after bpf_ct_insert_entry takes the nf_conn___init * and returns inserted nf_conn * should it be allowed.
But for the user in BPF C it will be the same nf_conn. The verifier can enforce different semantics on the underlying type's usage in kfuncs etc, while the user performs normal direct access to the nf_conn.
It will be the same case here, except you also introduce the case of kfuncs that are 'polymorphic' and can take both. Relaxing 'strict_type_match' for that arg and placing the type of member you wish to convert the pointer to gives you such polymorphism. But it's not correct to do for nf_conn___init to nf_conn, at least not by default.
In the future we may do:
union bpf_subtype {
type A;
type B;
type C;
};
And using the relaxed rule allows all types at off = 0 to be passed to kfuncs expecting type A/B/C for bpf_subtype *.bpf_subtype is a fake type. We're just using the type system to enforce different API usage for the same underlying kernel type.
Quoted 4 lines
We can fix this design issue by saying that '
___init' suffix is special and C type casting rules don't apply to it.
In all other cases bpf_cpumask/cpumask would should allow it.
I'm just saying the triple underscore is not visible to the user. You can declare kfunc that is:
struct foo___x *foo_alloc(void); in the kernel as struct foo *foo_alloc(void); in BPF program and avoid all the casting/ugliness and still enforce semantics around use.
Re: [PATCH bpf-next 2/8] bpf: Allow trusted args to walk struct when checking BTF IDs
Quoted 92 lines · Kumar Kartikeya Dwivedi
Quoted 78 lines · Alexei Starovoitov
Quoted 68 lines · David Vernet
Quoted 7 lines · Kumar Kartikeya Dwivedi
Quoted 6 lines · David Vernet
When validating BTF types for
KF_TRUSTED_ARGSkfuncs, the verifier currently enforces that the top-level type must match when calling the kfunc. In other words, the verifier does not allow the BPF program to pass a bitwise equivalent struct, despite it being functionally safe. For example, if you have the following type:Quoted 8 lines
Quoted 6 lines
struct
nf_conn___init{
structnf_connct;
};It would be safe to pass a struct
nf_conn___initto a kfunc expecting a structnf_conn.Just running
bpf_nfselftest would have shown this is false.And I feel silly, because I did run them, and could have sworn they passed...looking now at the
change_status_after_alloctestcase I see you're of course correct. Very poor example, thank you for pointing it out.Quoted 34 lines
Quoted 26 lines
Being able to do this will be useful for certain types
of kfunc / kptrs enabled by BPF. For example, in a follow-on patch, a series of kfuncs will be added which allow programs to do bitwise queries on cpumasks that are either allocated by the program (in which case they'll be a 'structbpf_cpumask' type that wraps acpumask_tas its first element), or a cpumask that was allocated by the main kernel (in which case it will just be a straightcpumask_t, as in
task->cpus_ptr).Having the two types of cpumasks allows us to distinguish between the two for when a cpumask is read-only vs. mutatable. A struct
bpf_cpumaskcan be mutated by e.g.bpf_cpumask_clear(), whereas a regularcpumask_tcannot be. On the other hand, a structbpf_cpumaskcan of course be queried in the exact same manner as acpumask_t, with e.g.bpf_cpumask_test_cpu().If we were to enforce that top level types match, then a user that's passing a struct
bpf_cpumaskto a read-onlycpumask_targument would have to cast with something likebpf_cast_to_kern_ctx()(which itself would need to be updated to expect the alias, and currently it only accommodates a single alias per prog type). Additionally, not specifyingKF_TRUSTED_ARGSis not an option, as some kfuncs take one argument as a structbpf_cpumask*, and another as a struct cpumask * (i.e.cpumask_t).Quoted 7 lines
In order to enable this, this patch relaxes the constraint that a
KF_TRUSTED_ARGSkfunc must have strict type matching. In order to try and be conservative and match existing behavior / expectations, this patch also enforces strict type checking for acquire kfuncs. We were already enforcing it for release kfuncs, so this should also improve the consistency of the semantics for kfuncs.Quoted 11 lines
What you want is to simply follow type at off = 0 (but still enforce the off = 0 requirement). This is something which is currently done for
bpf_sk_release(for structsk_common) incheck_reg_type, but it is not safe in general to just open this up for all cases. I suggest encoding this particular requirement in the argument, and simply using triple underscore variant of the type for the special 'read_only' requirement. This will allow you to use same type in your BPF C program, while allowing verifier to see them as two different types in kfunc parameters. Then just relax type following for the particular argument so that one can passcpumask_t___roto kfunc expectingcpumask_t(but only at off = 0, it just visits first member after failing match on top level type). off = 0 check is still necessary.Quoted 4 lines
Sigh, yeah, another ___ workaround but I agree it's probably the best we can do for now, and in general seems pretty useful. Obviously preferable to this patch which just doesn't work. Alexei, are you OK with this? If so, I'll take this approach for v2.
We decided to rely on strict type match when we introduced 'struct
nf_conn___init', but with that we twisted the C standard to, what looks to be, a wrong direction.Quoted 7 lines
For definition:
struct nf_conn___init { struct nf_conn ct; };if a kfunc accepts a pointer to
nf_connit should always accept a pointer tonf_conn__initfor both read and write, because in C that's valid and safe type cast.The intention of this
nf_conn___initwas to be invisible to the user. In selftests there is no trace ofnf_conn___init. It is only for enforcing semantics by virtue of type safety in the verifier.
Quoted 7 lines
Allocated but not inserted
nf_conn->nf_conn___initInserted/looked upnf_conn->nf_connWe can't pass e.g.
nf_conn___init* to a function expectingnf_conn*. The allocatednf_connmay not yet be fully initialized. It is only afterbpf_ct_insert_entrytakes thenf_conn___init* and returns insertednf_conn* should it be allowed.
Yes. I know and agree with all of the above.
Quoted 11 lines
But for the user in BPF C it will be the same
nf_conn. The verifier can enforce different semantics on the underlying type's usage in kfuncs etc, while the user performs normal direct access to thenf_conn.It will be the same case here, except you also introduce the case of kfuncs that are 'polymorphic' and can take both. Relaxing '
strict_type_match' for that arg and placing the type of member you wish to convert the pointer to gives you such polymorphism. But it's not correct to do fornf_conn___inittonf_conn, at least not by default.
Yes. Agree. I used unfortunate example in the previous reply with nf_conn___init. I meant to say:
For definition:
struct nf_conn_init {
struct nf_conn ct; };
if a kfunc accepts a pointer to nf_conn it should always accept a pointer to nf_conn_init for both read and write, because in C that's valid and safe type cast.
Meainng that C rules apply.
Our triple underscore is special, because it's the "same type".
In the 2nd part of my reply I'm proposing to use the whole suffix "___init" to indicate that. I think you're arguing that just "___" part is enough to enforce strict match. Matching foo___flavor with foo should not be allowed.
While passing struct foo_flavor {struct foo;} into a kfunc that accepts 'struct foo' is safe.
If so, I'm fine with such approach.
Re: [PATCH bpf-next 2/8] bpf: Allow trusted args to walk struct when checking BTF IDs
Quoted 125 lines · Alexei Starovoitov
Quoted 92 lines · Kumar Kartikeya Dwivedi
Quoted 78 lines · Alexei Starovoitov
Quoted 68 lines · David Vernet
Quoted 7 lines · Kumar Kartikeya Dwivedi
Quoted 6 lines · David Vernet
When validating BTF types for
KF_TRUSTED_ARGSkfuncs, the verifier currently enforces that the top-level type must match when calling the kfunc. In other words, the verifier does not allow the BPF program to pass a bitwise equivalent struct, despite it being functionally safe. For example, if you have the following type:Quoted 8 lines
Quoted 6 lines
struct
nf_conn___init{
structnf_connct;
};It would be safe to pass a struct
nf_conn___initto a kfunc expecting a structnf_conn.Just running
bpf_nfselftest would have shown this is false.And I feel silly, because I did run them, and could have sworn they passed...looking now at the
change_status_after_alloctestcase I see you're of course correct. Very poor example, thank you for pointing it out.Quoted 34 lines
Quoted 26 lines
Being able to do this will be useful for certain types
of kfunc / kptrs enabled by BPF. For example, in a follow-on patch, a series of kfuncs will be added which allow programs to do bitwise queries on cpumasks that are either allocated by the program (in which case they'll be a 'structbpf_cpumask' type that wraps acpumask_tas its first element), or a cpumask that was allocated by the main kernel (in which case it will just be a straightcpumask_t, as in
task->cpus_ptr).Having the two types of cpumasks allows us to distinguish between the two for when a cpumask is read-only vs. mutatable. A struct
bpf_cpumaskcan be mutated by e.g.bpf_cpumask_clear(), whereas a regularcpumask_tcannot be. On the other hand, a structbpf_cpumaskcan of course be queried in the exact same manner as acpumask_t, with e.g.bpf_cpumask_test_cpu().If we were to enforce that top level types match, then a user that's passing a struct
bpf_cpumaskto a read-onlycpumask_targument would have to cast with something likebpf_cast_to_kern_ctx()(which itself would need to be updated to expect the alias, and currently it only accommodates a single alias per prog type). Additionally, not specifyingKF_TRUSTED_ARGSis not an option, as some kfuncs take one argument as a structbpf_cpumask*, and another as a struct cpumask * (i.e.cpumask_t).Quoted 7 lines
In order to enable this, this patch relaxes the constraint that a
KF_TRUSTED_ARGSkfunc must have strict type matching. In order to try and be conservative and match existing behavior / expectations, this patch also enforces strict type checking for acquire kfuncs. We were already enforcing it for release kfuncs, so this should also improve the consistency of the semantics for kfuncs.Quoted 11 lines
What you want is to simply follow type at off = 0 (but still enforce the off = 0 requirement). This is something which is currently done for
bpf_sk_release(for structsk_common) incheck_reg_type, but it is not safe in general to just open this up for all cases. I suggest encoding this particular requirement in the argument, and simply using triple underscore variant of the type for the special 'read_only' requirement. This will allow you to use same type in your BPF C program, while allowing verifier to see them as two different types in kfunc parameters. Then just relax type following for the particular argument so that one can passcpumask_t___roto kfunc expectingcpumask_t(but only at off = 0, it just visits first member after failing match on top level type). off = 0 check is still necessary.Quoted 4 lines
Sigh, yeah, another ___ workaround but I agree it's probably the best we can do for now, and in general seems pretty useful. Obviously preferable to this patch which just doesn't work. Alexei, are you OK with this? If so, I'll take this approach for v2.
We decided to rely on strict type match when we introduced 'struct
nf_conn___init', but with that we twisted the C standard to, what looks to be, a wrong direction.Quoted 7 lines
For definition:
struct nf_conn___init { struct nf_conn ct; };if a kfunc accepts a pointer to
nf_connit should always accept a pointer tonf_conn__initfor both read and write, because in C that's valid and safe type cast.The intention of this
nf_conn___initwas to be invisible to the user. In selftests there is no trace ofnf_conn___init. It is only for enforcing semantics by virtue of type safety in the verifier.Quoted 7 lines
Allocated but not inserted
nf_conn->nf_conn___initInserted/looked upnf_conn->nf_connWe can't pass e.g.
nf_conn___init* to a function expectingnf_conn*. The allocatednf_connmay not yet be fully initialized. It is only afterbpf_ct_insert_entrytakes thenf_conn___init* and returns insertednf_conn* should it be allowed.Yes. I know and agree with all of the above.
Quoted 11 lines
But for the user in BPF C it will be the same
nf_conn. The verifier can enforce different semantics on the underlying type's usage in kfuncs etc, while the user performs normal direct access to thenf_conn.It will be the same case here, except you also introduce the case of kfuncs that are 'polymorphic' and can take both. Relaxing '
strict_type_match' for that arg and placing the type of member you wish to convert the pointer to gives you such polymorphism. But it's not correct to do fornf_conn___inittonf_conn, at least not by default.Yes. Agree. I used unfortunate example in the previous reply with
nf_conn___init. I meant to say:For definition:
struct nf_conn_init { struct nf_conn ct;};
if a kfunc accepts a pointer tonf_connit should always accept a pointer tonf_conn_initfor both read and write, because in C that's valid and safe type cast.
Quoted 8 lines
Meainng that C rules apply.
Our triple underscore is special, because it's the "same type".
In the 2nd part of my reply I'm proposing to use the whole suffix "___init" to indicate that. I think you're arguing that just "___" part is enough to enforce strict match. Matchingfoo___flavorwith foo should not be allowed.
While passing structfoo_flavor{struct foo;} into a kfunc that accepts 'struct foo' is safe.
If so, I'm fine with such approach.
Alright, I'll spin v2 to treat any type with name___.* as a disallowed alias, and update the documentation to mention it. I was originally going to push back and say that we should just use a single alias like __nocast to keep things simple, but it doesn't feel generalizable enough.
Re: [PATCH bpf-next 2/8] bpf: Allow trusted args to walk struct when checking BTF IDs
Quoted 135 lines · David Vernet
Quoted 125 lines · Alexei Starovoitov
Quoted 92 lines · Kumar Kartikeya Dwivedi
Quoted 78 lines · Alexei Starovoitov
Quoted 68 lines · David Vernet
Quoted 7 lines · Kumar Kartikeya Dwivedi
Quoted 6 lines · David Vernet
When validating BTF types for
KF_TRUSTED_ARGSkfuncs, the verifier currently enforces that the top-level type must match when calling the kfunc. In other words, the verifier does not allow the BPF program to pass a bitwise equivalent struct, despite it being functionally safe. For example, if you have the following type:Quoted 8 lines
Quoted 6 lines
struct
nf_conn___init{
structnf_connct;
};It would be safe to pass a struct
nf_conn___initto a kfunc expecting a structnf_conn.Just running
bpf_nfselftest would have shown this is false.And I feel silly, because I did run them, and could have sworn they passed...looking now at the
change_status_after_alloctestcase I see you're of course correct. Very poor example, thank you for pointing it out.Quoted 34 lines
Quoted 26 lines
Being able to do this will be useful for certain types
of kfunc / kptrs enabled by BPF. For example, in a follow-on patch, a series of kfuncs will be added which allow programs to do bitwise queries on cpumasks that are either allocated by the program (in which case they'll be a 'structbpf_cpumask' type that wraps acpumask_tas its first element), or a cpumask that was allocated by the main kernel (in which case it will just be a straightcpumask_t, as in
task->cpus_ptr).Having the two types of cpumasks allows us to distinguish between the two for when a cpumask is read-only vs. mutatable. A struct
bpf_cpumaskcan be mutated by e.g.bpf_cpumask_clear(), whereas a regularcpumask_tcannot be. On the other hand, a structbpf_cpumaskcan of course be queried in the exact same manner as acpumask_t, with e.g.bpf_cpumask_test_cpu().If we were to enforce that top level types match, then a user that's passing a struct
bpf_cpumaskto a read-onlycpumask_targument would have to cast with something likebpf_cast_to_kern_ctx()(which itself would need to be updated to expect the alias, and currently it only accommodates a single alias per prog type). Additionally, not specifyingKF_TRUSTED_ARGSis not an option, as some kfuncs take one argument as a structbpf_cpumask*, and another as a struct cpumask * (i.e.cpumask_t).Quoted 7 lines
In order to enable this, this patch relaxes the constraint that a
KF_TRUSTED_ARGSkfunc must have strict type matching. In order to try and be conservative and match existing behavior / expectations, this patch also enforces strict type checking for acquire kfuncs. We were already enforcing it for release kfuncs, so this should also improve the consistency of the semantics for kfuncs.Quoted 11 lines
What you want is to simply follow type at off = 0 (but still enforce the off = 0 requirement). This is something which is currently done for
bpf_sk_release(for structsk_common) incheck_reg_type, but it is not safe in general to just open this up for all cases. I suggest encoding this particular requirement in the argument, and simply using triple underscore variant of the type for the special 'read_only' requirement. This will allow you to use same type in your BPF C program, while allowing verifier to see them as two different types in kfunc parameters. Then just relax type following for the particular argument so that one can passcpumask_t___roto kfunc expectingcpumask_t(but only at off = 0, it just visits first member after failing match on top level type). off = 0 check is still necessary.Quoted 4 lines
Sigh, yeah, another ___ workaround but I agree it's probably the best we can do for now, and in general seems pretty useful. Obviously preferable to this patch which just doesn't work. Alexei, are you OK with this? If so, I'll take this approach for v2.
We decided to rely on strict type match when we introduced 'struct
nf_conn___init', but with that we twisted the C standard to, what looks to be, a wrong direction.Quoted 7 lines
For definition:
struct nf_conn___init { struct nf_conn ct; };if a kfunc accepts a pointer to
nf_connit should always accept a pointer tonf_conn__initfor both read and write, because in C that's valid and safe type cast.The intention of this
nf_conn___initwas to be invisible to the user. In selftests there is no trace ofnf_conn___init. It is only for enforcing semantics by virtue of type safety in the verifier.Quoted 7 lines
Allocated but not inserted
nf_conn->nf_conn___initInserted/looked upnf_conn->nf_connWe can't pass e.g.
nf_conn___init* to a function expectingnf_conn*. The allocatednf_connmay not yet be fully initialized. It is only afterbpf_ct_insert_entrytakes thenf_conn___init* and returns insertednf_conn* should it be allowed.Yes. I know and agree with all of the above.
Quoted 11 lines
But for the user in BPF C it will be the same
nf_conn. The verifier can enforce different semantics on the underlying type's usage in kfuncs etc, while the user performs normal direct access to thenf_conn.It will be the same case here, except you also introduce the case of kfuncs that are 'polymorphic' and can take both. Relaxing '
strict_type_match' for that arg and placing the type of member you wish to convert the pointer to gives you such polymorphism. But it's not correct to do fornf_conn___inittonf_conn, at least not by default.Yes. Agree. I used unfortunate example in the previous reply with
nf_conn___init. I meant to say:For definition:
struct nf_conn_init { struct nf_conn ct;};
if a kfunc accepts a pointer tonf_connit should always accept a pointer tonf_conn_initfor both read and write, because in C that's valid and safe type cast.Quoted 8 lines
Meainng that C rules apply.
Our triple underscore is special, because it's the "same type".
In the 2nd part of my reply I'm proposing to use the whole suffix "___init" to indicate that. I think you're arguing that just "___" part is enough to enforce strict match. Matchingfoo___flavorwith foo should not be allowed.
While passing structfoo_flavor{struct foo;} into a kfunc that accepts 'struct foo' is safe.
If so, I'm fine with such approach.
Quoted 5 lines
Alright, I'll spin v2 to treat any type with name___.* as a disallowed alias, and update the documentation to mention it. I was originally going to push back and say that we should just use a single alias like
__nocastto keep things simple, but it doesn't feel generalizable enough.
On second thought, unless you guys feel strongly, I'll just check ___init. The resulting code is going to be a lot of tricky string manipulation / math otherwise. Not _terrible_, but I'd prefer to avoid adding it until we have a concrete use-case. And I expect this could be implemented much simpler using something like tags, once gcc has support for it.
Re: [PATCH bpf-next 2/8] bpf: Allow trusted args to walk struct when checking BTF IDs
Quoted 26 lines · David Vernet
Quoted 20 lines
Quoted 11 lines
Yes. Agree. I used unfortunate example in the previous reply with
nf_conn___init. I meant to say:For definition:
struct nf_conn_init { struct nf_conn ct;};
if a kfunc accepts a pointer tonf_connit should always accept a pointer tonf_conn_initfor both read and write, because in C that's valid and safe type cast.Quoted 8 lines
Meainng that C rules apply.
Our triple underscore is special, because it's the "same type".
In the 2nd part of my reply I'm proposing to use the whole suffix "___init" to indicate that. I think you're arguing that just "___" part is enough to enforce strict match. Matchingfoo___flavorwith foo should not be allowed.
While passing structfoo_flavor{struct foo;} into a kfunc that accepts 'struct foo' is safe.
If so, I'm fine with such approach.Quoted 5 lines
Alright, I'll spin v2 to treat any type with name___.* as a disallowed alias, and update the documentation to mention it. I was originally going to push back and say that we should just use a single alias like
__nocastto keep things simple, but it doesn't feel generalizable enough.
Quoted 6 lines
On second thought, unless you guys feel strongly, I'll just check
___init. The resulting code is going to be a lot of tricky string manipulation / math otherwise. Not _terrible_, but I'd prefer to avoid adding it until we have a concrete use-case. And I expect this could be implemented much simpler using something like tags, once gcc has support for it.
There is bpf_core_is_flavor_sep() that makes it easy to check, but thinking more about it we probably should stick to strict "___init" suffix for now, since flavors can appear in progs too and they are equivalent to corresponding types in the kernel.
The nf_conn___init is kernel only type.
The verifier sees that bpf_xdp_ct_alloc kfunc returns it, but when we export this kfunc to bpf prog it returns nf_conn. We probably should pick some other suffix without "___" to distinguish from flavors. bpf prog should not use nf_conn___init.
PATCH 3/8 bpf: Disallow NULL PTR_TO_MEM for trusted kfuncs
In reply to David VernetKF_TRUSTED_ARGS kfuncs currently have a subtle and insidious bug in validating pointers to scalars. Say that you have a kfunc like the following, which takes an array as the first argument:
bool bpf_cpumask_empty(const struct cpumask *cpumask)
{
return cpumask_empty(cpumask);
}...BTF_ID_FLAGS(func, bpf_cpumask_empty, KF_TRUSTED_ARGS)
...
If a BPF program were to invoke the kfunc with a NULL argument, it would crash the kernel. The reason is that struct cpumask is defined as a bitmap, which is itself defined as an array, and is accessed as a memory address memory by bitmap operations. So when the verifier analyzes the register, it interprets it as a pointer to a scalar struct, which is an array of size 8. check_mem_reg() then sees that the register is NULL, and returns 0, and the kfunc crashes when it passes it down to the cpumask wrappers.
To fix this, this patch adds a check for KF_ARG_PTR_TO_MEM which verifies that the register doesn't contain a NULL pointer if the kfunc is KF_TRUSTED_ARGS.
This may or may not be desired behavior. Some kfuncs may want to allow callers to pass NULL-able pointers. An alternative would be adding a KF_NOT_NULL flag and leaving KF_TRUSTED_ARGS alone, though given that a kfunc is saying it wants to "trust" an argument, it seems reasonable to prevent NULL.
--- kernel/bpf/verifier.c | 5 +++++ 1 file changed, 5 insertions(+)
kernel/bpf/verifier.c +5 -0
@@ -9092,6 +9092,11 @@ static int check_kfunc_args(struct bpf_verifier_env *env, struct bpf_kfunc_call_ i, btf_type_str(ref_t), ref_tname, PTR_ERR(resolve_ret));return -EINVAL ; } +if (is_kfunc_trusted_args (meta) &®ister_is_null (reg)) { +verbose (env,"NULL pointer passed to trusted arg%d\n" , i); +return -EACCES ; + } + ret =check_mem_reg (env, reg, regno, type_size);if (ret <0 )return ret;
Signature · 1 line
2.39.0
Kumar Kartikeya Dwivedi
maintainerRe: [PATCH bpf-next 3/8] bpf: Disallow NULL PTR_TO_MEM for trusted kfuncs
Quoted 4 lines · David Vernet
KF_TRUSTED_ARGSkfuncs currently have a subtle and insidious bug in validating pointers to scalars. Say that you have a kfunc like the following, which takes an array as the first argument:
Quoted 9 lines
bool
bpf_cpumask_empty(const struct cpumask *cpumask){ return cpumask_empty(cpumask); }...
BTF_ID_FLAGS(func, bpf_cpumask_empty, KF_TRUSTED_ARGS)
...
This is known and expected.
Quoted 29 lines
If a BPF program were to invoke the kfunc with a NULL argument, it would crash the kernel. The reason is that struct cpumask is defined as a bitmap, which is itself defined as an array, and is accessed as a memory address memory by bitmap operations. So when the verifier analyzes the register, it interprets it as a pointer to a scalar struct, which is an array of size 8.
check_mem_reg()then sees that the register is NULL, and returns 0, and the kfunc crashes when it passes it down to the cpumask wrappers.To fix this, this patch adds a check for
KF_ARG_PTR_TO_MEMwhich verifies that the register doesn't contain a NULL pointer if the kfunc isKF_TRUSTED_ARGS.This may or may not be desired behavior. Some kfuncs may want to allow callers to pass NULL-able pointers. An alternative would be adding a
KF_NOT_NULLflag and leavingKF_TRUSTED_ARGSalone, though given that a kfunc is saying it wants to "trust" an argument, it seems reasonable to prevent NULL.Signed-off-by David Vernet <[email protected]>--- kernel/bpf/verifier.c | 5 +++++ 1 file changed, 5 insertions(+)kernel/bpf/verifier.c +0
-0
kernel/bpf/verifier.c static int check_kfunc_args(struct bpf_verifier_env *env, struct bpf_kfunc_call_ · line 9099
Quoted 8 lines
kernel/bpf/verifier.c +5
-0@@ -9092,6 +9092,11 @@ static int check_kfunc_args(struct bpf_verifier_env *env, struct bpf_kfunc_call_ i, btf_type_str(ref_t), ref_tname, PTR_ERR(resolve_ret));return -EINVAL ; } +if (is_kfunc_trusted_args (meta) &®ister_is_null (reg)) { +verbose (env,"NULL pointer passed to trusted arg%d\n" , i); +return -EACCES ; + } +
Current patch looks like a stop gap solution. Just checking for register_is_null is not enough, what about PTR_MAYBE_NULL? That can also be passed. Some arguments can be both PTR_TO_BTF_ID and PTR_TO_MEM, so it will be bypassed in the other case because this check is limited to KF_ARG_PTR_TO_MEM. It would probably be better to disallow NULL by default and explicitly tag the argument with __or_null to indicate that NULL is accepted. Seems like a much better default to me.
Re: [PATCH bpf-next 3/8] bpf: Disallow NULL PTR_TO_MEM for trusted kfuncs
Quoted 10 lines · Kumar Kartikeya Dwivedi
Quoted 9 lines · David Vernet
KF_TRUSTED_ARGSkfuncs currently have a subtle and insidious bug in validating pointers to scalars. Say that you have a kfunc like the following, which takes an array as the first argument:bool
bpf_cpumask_empty(const struct cpumask *cpumask){ return cpumask_empty(cpumask); }
Quoted 6 lines
Quoted 4 lines
...
BTF_ID_FLAGS(func, bpf_cpumask_empty, KF_TRUSTED_ARGS)
...This is known and expected.
Expected? So kfuncs are expected to always check whether any pointer to a scalar is non-NULL? Seems like a poor UX. I like your suggestion below to address it so it's opt-in.
Quoted 34 lines
Quoted 34 lines
If a BPF program were to invoke the kfunc with a NULL argument, it would crash the kernel. The reason is that struct cpumask is defined as a bitmap, which is itself defined as an array, and is accessed as a memory address memory by bitmap operations. So when the verifier analyzes the register, it interprets it as a pointer to a scalar struct, which is an array of size 8.
check_mem_reg()then sees that the register is NULL, and returns 0, and the kfunc crashes when it passes it down to the cpumask wrappers.To fix this, this patch adds a check for
KF_ARG_PTR_TO_MEMwhich verifies that the register doesn't contain a NULL pointer if the kfunc isKF_TRUSTED_ARGS.This may or may not be desired behavior. Some kfuncs may want to allow callers to pass NULL-able pointers. An alternative would be adding a
KF_NOT_NULLflag and leavingKF_TRUSTED_ARGSalone, though given that a kfunc is saying it wants to "trust" an argument, it seems reasonable to prevent NULL.Signed-off-by David Vernet <[email protected]>--- kernel/bpf/verifier.c | 5 +++++ 1 file changed, 5 insertions(+)kernel/bpf/verifier.c +2
-0@@ -9092,6 +9092,11 @@ static int check_kfunc_args(struct bpf_verifier_env *env, struct bpf_kfunc_call_ i, btf_type_str(ref_t), ref_tname, PTR_ERR(resolve_ret));return -EINVAL ; } +if (is_kfunc_trusted_args (meta) &®ister_is_null (reg)) { +verbose (env,"NULL pointer passed to trusted arg%d\n" , i);
Quoted 8 lines
kernel/bpf/verifier.c static int check_kfunc_args(struct bpf_verifier_env *env, struct bpf_kfunc_call_ · line 9099
Quoted 3 lines
kernel/bpf/verifier.c +3
-0+return -EACCES ; + } +Current patch looks like a stop gap solution. Just checking for
register_is_nullis not enough, what aboutPTR_MAYBE_NULL? That can also be passed. Some arguments can be bothPTR_TO_BTF_IDandPTR_TO_MEM, so it will be bypassed in the other case because this check is limited toKF_ARG_PTR_TO_MEM. It would
This wouldn't happen if you had a PTR_TO_BTF_ID, would it? In that case you could just rely on PTR_TRUSTED. IMO that really should be the default for any pointer argument. If you have KF_ARGS_TRUSTED, the kfunc should just be able to assume that the pointers have been verified.
Regardless, you're right that this isn't a complete solution because of PTR_MAYBE_NULL. I'm fine with adding an __or_null suffix that allows NULL, and we disallow NULL or PTR_MAYBE_NULL from any KF_TRUSTED_ARGS argument otherwise. Or we just also disallow PTR_MAYBE_NULL and try to hold off on adding yet another suffix until we have proper per-arg kfunc definitions.
Quoted 3 lines
probably be better to disallow NULL by default and explicitly tag the argument with
__or_nullto indicate that NULL is accepted. Seems like a much better default to me.
Re: [PATCH bpf-next 3/8] bpf: Disallow NULL PTR_TO_MEM for trusted kfuncs
Quoted 16 lines · David Vernet
Quoted 15 lines · Kumar Kartikeya Dwivedi
Quoted 13 lines · David Vernet
KF_TRUSTED_ARGSkfuncs currently have a subtle and insidious bug in validating pointers to scalars. Say that you have a kfunc like the following, which takes an array as the first argument:bool
bpf_cpumask_empty(const struct cpumask *cpumask){ return cpumask_empty(cpumask); }...
BTF_ID_FLAGS(func, bpf_cpumask_empty, KF_TRUSTED_ARGS)
...
Quoted 5 lines
Quoted 1 line
This is known and expected.
Expected? So kfuncs are expected to always check whether any pointer to a scalar is non-NULL? Seems like a poor UX. I like your suggestion below to address it so it's opt-in.
I'm confused as well.KF_TRUSTED_ARGS means that all arguments are valid and != NULL. From our doc:
"
The KF_TRUSTED_ARGS flag is used for kfuncs taking pointer arguments. It indicates that the all pointer arguments are valid, and that all pointers to BTF objects have been passed in their unmodified form (that is, at a zero "
That includes that arguments are guaranted to be != NULL.
Quoted 43 lines
Quoted 34 lines
Quoted 34 lines
If a BPF program were to invoke the kfunc with a NULL argument, it would crash the kernel. The reason is that struct cpumask is defined as a bitmap, which is itself defined as an array, and is accessed as a memory address memory by bitmap operations. So when the verifier analyzes the register, it interprets it as a pointer to a scalar struct, which is an array of size 8.
check_mem_reg()then sees that the register is NULL, and returns 0, and the kfunc crashes when it passes it down to the cpumask wrappers.To fix this, this patch adds a check for
KF_ARG_PTR_TO_MEMwhich verifies that the register doesn't contain a NULL pointer if the kfunc isKF_TRUSTED_ARGS.This may or may not be desired behavior. Some kfuncs may want to allow callers to pass NULL-able pointers. An alternative would be adding a
KF_NOT_NULLflag and leavingKF_TRUSTED_ARGSalone, though given that a kfunc is saying it wants to "trust" an argument, it seems reasonable to prevent NULL.Signed-off-by David Vernet <[email protected]>--- kernel/bpf/verifier.c | 5 +++++ 1 file changed, 5 insertions(+)kernel/bpf/verifier.c +2
-0@@ -9092,6 +9092,11 @@ static int check_kfunc_args(struct bpf_verifier_env *env, struct bpf_kfunc_call_ i, btf_type_str(ref_t), ref_tname, PTR_ERR(resolve_ret));return -EINVAL ; } +if (is_kfunc_trusted_args (meta) &®ister_is_null (reg)) { +verbose (env,"NULL pointer passed to trusted arg%d\n" , i);Quoted 8 lines
kernel/bpf/verifier.c static int check_kfunc_args(struct bpf_verifier_env *env, struct bpf_kfunc_call_ · line 9099
Quoted 3 lines
kernel/bpf/verifier.c +3
-0+return -EACCES ; + } +Current patch looks like a stop gap solution. Just checking for
register_is_nullis not enough, what aboutPTR_MAYBE_NULL? That can also be passed. Some arguments can be bothPTR_TO_BTF_IDandPTR_TO_MEM, so it will be bypassed in the other case because this check is limited toKF_ARG_PTR_TO_MEM. It would
Quoted 4 lines
This wouldn't happen if you had a
PTR_TO_BTF_ID, would it? In that case you could just rely onPTR_TRUSTED. IMO that really should be the default for any pointer argument. If you haveKF_ARGS_TRUSTED, the kfunc should just be able to assume that the pointers have been verified.
+1
Quoted 6 lines
Regardless, you're right that this isn't a complete solution because of
PTR_MAYBE_NULL. I'm fine with adding an__or_nullsuffix that allows NULL, and we disallow NULL orPTR_MAYBE_NULLfrom anyKF_TRUSTED_ARGSargument otherwise. Or we just also disallowPTR_MAYBE_NULLand try to hold off on adding yet another suffix until we have proper per-arg kfunc definitions.
PTR_MAYBE_NULL should not be allowed into kfunc with KF_TRUSTED_ARGS.
PATCH 4/8 bpf: Enable cpumasks to be queried and used as kptrs
In reply to David VernetCertain programs may wish to be able to query cpumasks. For example, if a program that is tracing percpu operations may wish to track which tasks end up running on which CPUs, and it could be useful to associate that with the tasks' cpumasks. Similarly, a program tracking NUMA allocations, CPU scheduling domains, etc, would potentially benefit from being able to see which CPUs a task could be migrated to, etc.
This patch enables these such cases by introducing a series of bpf_cpumask_* kfuncs. Amongst these kfuncs, there are two separate "classes" of operations:
1. kfuncs which allow the caller to allocate and mutate their own cpumasks in the form of a struct bpf_cpumask * object. Such kfuncs include e.g. bpf_cpumask_create() to allocate the cpumask, and bpf_cpumask_or() to mutate it. "Regular" cpumasks such as p->cpus_ptr may not be passed to these kfuncs, and the verifier will ensure this is the case by comparing BTF IDs.
2. Read-only operations which operate on const struct cpumask * arguments. For example, bpf_cpumask_test_cpu(), which tests whether a CPU is set in the cpumask. Any trusted struct cpumask * or struct bpf_cpumask * may be passed to these kfuncs. The verifier allows struct bpf_cpumask * even though the kfunc is defined with struct cpumask * because the first element of a struct bpf_cpumask is a cpumask_t, so it is safe to cast.
A follow-on patch will add selftests which validate these kfuncs, and another will document them.
Note that some of the kfuncs that were added would benefit from additional verification logic. For example, any kfunc taking a CPU argument that exceeds the number of CPUs on the system, etc. For now, we silently check for and ignore these cases at runtime. When we have e.g. per-argument kfunc flags, it might be helpful to add another KF_CPU-type flag that specifies that the verifier should validate that it's a valid CPU.
--- kernel/bpf/Makefile | 1 + kernel/bpf/cpumask.c | 263 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 264 insertions(+) create mode 100644 kernel/bpf/cpumask.c
kernel/bpf/Makefile +1 -0
@@ -36,6 +36,7 @@ obj-$(CONFIG_DEBUG_INFO_BTF) += sysfs_btf.o endif ifeq ($(CONFIG_BPF_JIT),y) obj-$(CONFIG_BPF_SYSCALL) += bpf_struct_ops.o +obj-$(CONFIG_BPF_SYSCALL) += cpumask.o obj-${CONFIG_BPF_LSM} += bpf_lsm.o endif obj-$(CONFIG_BPF_PRELOAD) += preload/
kernel/bpf/cpumask.c new file +263 -0
263 lines not on this page · raw message
Signature · 1 line
2.39.0
kernel test robot
build botRe: [PATCH bpf-next 4/8] bpf: Enable cpumasks to be queried and used as kptrs
Thank you for the patch! Perhaps something to improve:
Hi David,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on bpf-next/master]
url: https://github.com/intel-lab-lkp/linux/commits/David-Vernet/bpf-Enable-annotating-trusted-nested-pointers/20230120-080139 base: https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git master patch link: https://lore.kernel.org/r/20230119235833.2948341-5-void%40manifault.com patch subject: [PATCH bpf-next 4/8] bpf: Enable cpumasks to be queried and used as kptrs config: sparc-allyesconfig (https://download.01.org/0day-ci/archive/20230120/[email protected]/config) compiler: sparc64-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/11541205c58f2226e5ffbc5967317469d65efac6
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review David-Vernet/bpf-Enable-annotating-trusted-nested-pointers/20230120-080139 git checkout 11541205c58f2226e5ffbc5967317469d65efac6
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=sparc olddefconfig COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=sparc SHELL=/bin/bash kernel/bpf/
If you fix the issue, kindly add following tag where applicable | Reported-by: kernel test robot <[email protected]>
All warnings (new ones prefixed by >>):
>> kernel/bpf/cpumask.c:38:21: warning: no previous prototype for 'bpf_cpumask_create' [-Wmissing-prototypes]
38 | struct bpf_cpumask *bpf_cpumask_create(void)
| ^~~~~~~~~~~~~~~~~~
>> kernel/bpf/cpumask.c:52:21: warning: no previous prototype for 'bpf_cpumask_acquire' [-Wmissing-prototypes]
52 | struct bpf_cpumask *bpf_cpumask_acquire(struct bpf_cpumask *cpumask)
| ^~~~~~~~~~~~~~~~~~~
>> kernel/bpf/cpumask.c:58:21: warning: no previous prototype for 'bpf_cpumask_kptr_get' [-Wmissing-prototypes]
58 | struct bpf_cpumask *bpf_cpumask_kptr_get(struct bpf_cpumask **cpumaskp)
| ^~~~~~~~~~~~~~~~~~~~
>> kernel/bpf/cpumask.c:76:6: warning: no previous prototype for 'bpf_cpumask_release' [-Wmissing-prototypes]
76 | void bpf_cpumask_release(struct bpf_cpumask *cpumask)
| ^~~~~~~~~~~~~~~~~~~
>> kernel/bpf/cpumask.c:88:5: warning: no previous prototype for 'bpf_cpumask_first' [-Wmissing-prototypes]
88 | u32 bpf_cpumask_first(const struct cpumask *cpumask)
| ^~~~~~~~~~~~~~~~~
>> kernel/bpf/cpumask.c:93:5: warning: no previous prototype for 'bpf_cpumask_first_zero' [-Wmissing-prototypes]
93 | u32 bpf_cpumask_first_zero(const struct cpumask *cpumask)
| ^~~~~~~~~~~~~~~~~~~~~~
>> kernel/bpf/cpumask.c:98:6: warning: no previous prototype for 'bpf_cpumask_set_cpu' [-Wmissing-prototypes]
98 | void bpf_cpumask_set_cpu(u32 cpu, struct bpf_cpumask *cpumask)
| ^~~~~~~~~~~~~~~~~~~
>> kernel/bpf/cpumask.c:106:6: warning: no previous prototype for 'bpf_cpumask_clear_cpu' [-Wmissing-prototypes]
106 | void bpf_cpumask_clear_cpu(u32 cpu, struct bpf_cpumask *cpumask)
| ^~~~~~~~~~~~~~~~~~~~~
>> kernel/bpf/cpumask.c:114:6: warning: no previous prototype for 'bpf_cpumask_test_cpu' [-Wmissing-prototypes]
114 | bool bpf_cpumask_test_cpu(u32 cpu, const struct cpumask *cpumask)
| ^~~~~~~~~~~~~~~~~~~~
>> kernel/bpf/cpumask.c:122:6: warning: no previous prototype for 'bpf_cpumask_test_and_set_cpu' [-Wmissing-prototypes]
122 | bool bpf_cpumask_test_and_set_cpu(u32 cpu, struct bpf_cpumask *cpumask)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> kernel/bpf/cpumask.c:130:6: warning: no previous prototype for 'bpf_cpumask_test_and_clear_cpu' [-Wmissing-prototypes]
130 | bool bpf_cpumask_test_and_clear_cpu(u32 cpu, struct bpf_cpumask *cpumask)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> kernel/bpf/cpumask.c:138:6: warning: no previous prototype for 'bpf_cpumask_setall' [-Wmissing-prototypes]
138 | void bpf_cpumask_setall(struct bpf_cpumask *cpumask)
| ^~~~~~~~~~~~~~~~~~
>> kernel/bpf/cpumask.c:143:6: warning: no previous prototype for 'bpf_cpumask_clear' [-Wmissing-prototypes]
143 | void bpf_cpumask_clear(struct bpf_cpumask *cpumask)
| ^~~~~~~~~~~~~~~~~
>> kernel/bpf/cpumask.c:148:6: warning: no previous prototype for 'bpf_cpumask_and' [-Wmissing-prototypes]
148 | bool bpf_cpumask_and(struct bpf_cpumask *dst,
| ^~~~~~~~~~~~~~~
>> kernel/bpf/cpumask.c:155:6: warning: no previous prototype for 'bpf_cpumask_or' [-Wmissing-prototypes]
155 | void bpf_cpumask_or(struct bpf_cpumask *dst,
| ^~~~~~~~~~~~~~
>> kernel/bpf/cpumask.c:162:6: warning: no previous prototype for 'bpf_cpumask_xor' [-Wmissing-prototypes]
162 | void bpf_cpumask_xor(struct bpf_cpumask *dst,
| ^~~~~~~~~~~~~~~
>> kernel/bpf/cpumask.c:169:6: warning: no previous prototype for 'bpf_cpumask_equal' [-Wmissing-prototypes]
169 | bool bpf_cpumask_equal(const struct cpumask *src1, const struct cpumask *src2)
| ^~~~~~~~~~~~~~~~~
>> kernel/bpf/cpumask.c:174:6: warning: no previous prototype for 'bpf_cpumask_intersects' [-Wmissing-prototypes]
174 | bool bpf_cpumask_intersects(const struct cpumask *src1, const struct cpumask *src2)
| ^~~~~~~~~~~~~~~~~~~~~~
>> kernel/bpf/cpumask.c:179:6: warning: no previous prototype for 'bpf_cpumask_subset' [-Wmissing-prototypes]
179 | bool bpf_cpumask_subset(const struct cpumask *src1, const struct cpumask *src2)
| ^~~~~~~~~~~~~~~~~~
>> kernel/bpf/cpumask.c:184:6: warning: no previous prototype for 'bpf_cpumask_empty' [-Wmissing-prototypes] 184 | bool bpf_cpumask_empty(const struct cpumask *cpumask)
| ^~~~~~~~~~~~~~~~~
kernel/bpf/cpumask.c:189:6: warning: no previous prototype for 'bpf_cpumask_full' [-Wmissing-prototypes]
189 | bool bpf_cpumask_full(const struct cpumask *cpumask)
| ^~~~~~~~~~~~~~~~
kernel/bpf/cpumask.c:194:6: warning: no previous prototype for 'bpf_cpumask_copy' [-Wmissing-prototypes]
194 | void bpf_cpumask_copy(struct bpf_cpumask *dst, const struct cpumask *src)
| ^~~~~~~~~~~~~~~~
kernel/bpf/cpumask.c:199:5: warning: no previous prototype for 'bpf_cpumask_any' [-Wmissing-prototypes]
199 | u32 bpf_cpumask_any(const struct cpumask *cpumask)
| ^~~~~~~~~~~~~~~
kernel/bpf/cpumask.c:204:5: warning: no previous prototype for 'bpf_cpumask_any_and' [-Wmissing-prototypes]
204 | u32 bpf_cpumask_any_and(const struct cpumask *src1, const struct cpumask *src2)
| ^~~~~~~~~~~~~~~~~~~
vim +/bpf_cpumask_create +38 kernel/bpf/cpumask.c
37
> 38 struct bpf_cpumask *bpf_cpumask_create(void)
39 {
40 struct bpf_cpumask *cpumask;
41
42 cpumask = bpf_mem_alloc(&bpf_cpumask_ma, sizeof(*cpumask));
43 if (!cpumask)
44 return NULL;
45
46 memset(cpumask, 0, sizeof(*cpumask));
47 refcount_set(&cpumask->usage, 1);
48
49 return cpumask;
50 }
51
> 52 struct bpf_cpumask *bpf_cpumask_acquire(struct bpf_cpumask *cpumask)
53 {
54 refcount_inc(&cpumask->usage);
55 return cpumask;
56 }
57
> 58 struct bpf_cpumask *bpf_cpumask_kptr_get(struct bpf_cpumask **cpumaskp)
59 {
60 struct bpf_cpumask *cpumask;
61
62 /* The BPF memory allocator frees memory backing its caches in an RCU
63 * callback. Thus, we can safely use RCU to ensure that the cpumask is
64 * safe to read.
65 */
66 rcu_read_lock();
67
68 cpumask = READ_ONCE(*cpumaskp);
69 if (cpumask && !refcount_inc_not_zero(&cpumask->usage))
70 cpumask = NULL;
71
72 rcu_read_unlock();
73 return cpumask;
74 }
75
> 76 void bpf_cpumask_release(struct bpf_cpumask *cpumask)
77 {
78 if (!cpumask)
79 return;
80
81 if (refcount_dec_and_test(&cpumask->usage)) {
82 migrate_disable();
83 bpf_mem_free(&bpf_cpumask_ma, cpumask);
84 migrate_enable();
85 }
86 }
87
> 88 u32 bpf_cpumask_first(const struct cpumask *cpumask)
89 {
90 return cpumask_first(cpumask);
91 }
92
> 93 u32 bpf_cpumask_first_zero(const struct cpumask *cpumask)
94 {
95 return cpumask_first_zero(cpumask);
96 }
97
> 98 void bpf_cpumask_set_cpu(u32 cpu, struct bpf_cpumask *cpumask)
99 {
100 if (!cpu_valid(cpu))
101 return;
102
103 cpumask_set_cpu(cpu, (struct cpumask *)cpumask);
104 }
105
> 106 void bpf_cpumask_clear_cpu(u32 cpu, struct bpf_cpumask *cpumask)
107 {
108 if (!cpu_valid(cpu))
109 return;
110
111 cpumask_clear_cpu(cpu, (struct cpumask *)cpumask);
112 }
113
> 114 bool bpf_cpumask_test_cpu(u32 cpu, const struct cpumask *cpumask)
115 {
116 if (!cpu_valid(cpu))
117 return false;
118
119 return cpumask_test_cpu(cpu, (struct cpumask *)cpumask);
120 }
121
> 122 bool bpf_cpumask_test_and_set_cpu(u32 cpu, struct bpf_cpumask *cpumask)
123 {
124 if (!cpu_valid(cpu))
125 return false;
126
127 return cpumask_test_and_set_cpu(cpu, (struct cpumask *)cpumask);
128 }
129
> 130 bool bpf_cpumask_test_and_clear_cpu(u32 cpu, struct bpf_cpumask *cpumask)
131 {
132 if (!cpu_valid(cpu))
133 return false;
134
135 return cpumask_test_and_clear_cpu(cpu, (struct cpumask *)cpumask);
136 }
137
> 138 void bpf_cpumask_setall(struct bpf_cpumask *cpumask)
139 {
140 cpumask_setall((struct cpumask *)cpumask);
141 }
142
> 143 void bpf_cpumask_clear(struct bpf_cpumask *cpumask)
144 {
145 cpumask_clear((struct cpumask *)cpumask);
146 }
147
> 148 bool bpf_cpumask_and(struct bpf_cpumask *dst,
149 const struct cpumask *src1,
150 const struct cpumask *src2)
151 {
152 return cpumask_and((struct cpumask *)dst, src1, src2);
153 }
154
> 155 void bpf_cpumask_or(struct bpf_cpumask *dst,
156 const struct cpumask *src1,
157 const struct cpumask *src2)
158 {
159 cpumask_or((struct cpumask *)dst, src1, src2);
160 }
161
> 162 void bpf_cpumask_xor(struct bpf_cpumask *dst,
163 const struct cpumask *src1,
164 const struct cpumask *src2)
165 {
166 cpumask_xor((struct cpumask *)dst, src1, src2);
167 }
168
> 169 bool bpf_cpumask_equal(const struct cpumask *src1, const struct cpumask *src2)
170 {
171 return cpumask_equal(src1, src2);
172 }
173
> 174 bool bpf_cpumask_intersects(const struct cpumask *src1, const struct cpumask *src2)
175 {
176 return cpumask_intersects(src1, src2);
177 }
178
> 179 bool bpf_cpumask_subset(const struct cpumask *src1, const struct cpumask *src2)
180 {
181 return cpumask_subset(src1, src2);
182 }
183
> 184 bool bpf_cpumask_empty(const struct cpumask *cpumask)
185 {
186 return cpumask_empty(cpumask);
187 }
188
> 189 bool bpf_cpumask_full(const struct cpumask *cpumask)
190 {
191 return cpumask_full(cpumask);
192 }
193
> 194 void bpf_cpumask_copy(struct bpf_cpumask *dst, const struct cpumask *src)
195 {
196 cpumask_copy((struct cpumask *)dst, src);
197 }
198
> 199 u32 bpf_cpumask_any(const struct cpumask *cpumask)
200 {
201 return cpumask_any(cpumask);
202 }
203
> 204 u32 bpf_cpumask_any_and(const struct cpumask *src1, const struct cpumask *src2) 205 {
206 return cpumask_any_and(src1, src2);
207 }
208
Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests
Re: [PATCH bpf-next 4/8] bpf: Enable cpumasks to be queried and used as kptrs
Quoted 24 lines · kernel test robot
Hi David,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on bpf-next/master]
url: https://github.com/intel-lab-lkp/linux/commits/David-Vernet/bpf-Enable-annotating-trusted-nested-pointers/20230120-080139 base: https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git master patch link: https://lore.kernel.org/r/20230119235833.2948341-5-void%40manifault.com patch subject: [PATCH bpf-next 4/8] bpf: Enable cpumasks to be queried and used as kptrs config: sparc-allyesconfig (https://download.01.org/0day-ci/archive/20230120/[email protected]/config) compiler: sparc64-linux-gcc (GCC) 12.1.0reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/11541205c58f2226e5ffbc5967317469d65efac6
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review David-Vernet/bpf-Enable-annotating-trusted-nested-pointers/20230120-080139 git checkout11541205c58f2226e5ffbc5967317469d65efac6
# save the config file
mkdirbuild_dir&& cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=sparc olddefconfig COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=sparc SHELL=/bin/bashkernel/bpf/
Quoted 7 lines
If you fix the issue, kindly add following tag where applicable | Reported-by: kernel test robot <[email protected]>
All warnings (new ones prefixed by >>):
Quoted 1 line
Quoted 1 line
kernel/bpf/cpumask.c:38:21: warning: no previous prototype for 'bpf_cpumask_create' [-Wmissing-prototypes]38 | struct
bpf_cpumask*bpf_cpumask_create(void)
Sorry, also forgot to do the __diag() dance described in [0]. I'll include that fix in v2.
[0]: https://docs.kernel.org/bpf/kfuncs.html#creating-a-wrapper-kfunc
This is also reminding me to send out the v2 for [1]. I'll do that after I take care of another few small things I've been putting off.
[1]: https://lore.kernel.org/lkml/[email protected]/T/
Thanks,
David
Re: [PATCH bpf-next 4/8] bpf: Enable cpumasks to be queried and used as kptrs
In reply to David VernetQuoted 4 lines · David Vernet
silently check for and ignore these cases at runtime. When we have e.g. per-argument kfunc flags, it might be helpful to add another KF_CPU-type flag that specifies that the verifier should validate that it's a valid CPU.
...
Quoted 7 lines
kernel/bpf/cpumask.c new file +7
-0+void bpf_cpumask_set_cpu (u32 cpu,struct bpf_cpumask *cpumask) +{ +if (!cpu_valid (cpu)) +return ; + +cpumask_set_cpu (cpu, (struct cpumask *)cpumask); +}
...
kernel/bpf/cpumask.c line 109
Quoted 4 lines
kernel/bpf/cpumask.c new file +4
-0+void bpf_cpumask_clear_cpu (u32 cpu,struct bpf_cpumask *cpumask) +{ +if (!cpu_valid (cpu)) +return ;
I don't think we'll be able to get rid of this with KF_CPU or special suffix. The argument might be a variable and not a constant at the verification time. We would have to allow passing unknown vars otherwise the UX will be too restrictive, so this run-time check would have to stay.
Re: [PATCH bpf-next 4/8] bpf: Enable cpumasks to be queried and used as kptrs
Quoted 18 lines · Alexei Starovoitov
Quoted 4 lines · David Vernet
silently check for and ignore these cases at runtime. When we have e.g. per-argument kfunc flags, it might be helpful to add another KF_CPU-type flag that specifies that the verifier should validate that it's a valid CPU.
...
Quoted 7 lines
kernel/bpf/cpumask.c new file +7
-0+void bpf_cpumask_set_cpu (u32 cpu,struct bpf_cpumask *cpumask) +{ +if (!cpu_valid (cpu)) +return ; + +cpumask_set_cpu (cpu, (struct cpumask *)cpumask); +}...
Quoted 9 lines
kernel/bpf/cpumask.c line 109
Quoted 4 lines
kernel/bpf/cpumask.c new file +4
-0+void bpf_cpumask_clear_cpu (u32 cpu,struct bpf_cpumask *cpumask) +{ +if (!cpu_valid (cpu)) +return ;I don't think we'll be able to get rid of this with
KF_CPUor special suffix. The argument might be a variable and not a constant at the verification time. We would have to allow passing unknown vars otherwise the UX will be too restrictive, so this run-time check would have to stay.
Makes sense. We'll just leave it as is then and document that passing in cpu >= nr_cpus is silently ignored for any kfunc taking a cpu argument.
Re: [PATCH bpf-next 4/8] bpf: Enable cpumasks to be queried and used as kptrs
Quoted 29 lines · David Vernet
Quoted 18 lines · Alexei Starovoitov
Quoted 4 lines · David Vernet
silently check for and ignore these cases at runtime. When we have e.g. per-argument kfunc flags, it might be helpful to add another KF_CPU-type flag that specifies that the verifier should validate that it's a valid CPU.
...
Quoted 7 lines
kernel/bpf/cpumask.c new file +7
-0+void bpf_cpumask_set_cpu (u32 cpu,struct bpf_cpumask *cpumask) +{ +if (!cpu_valid (cpu)) +return ; + +cpumask_set_cpu (cpu, (struct cpumask *)cpumask); +}...
Quoted 9 lines
kernel/bpf/cpumask.c line 109
Quoted 4 lines
kernel/bpf/cpumask.c new file +4
-0+void bpf_cpumask_clear_cpu (u32 cpu,struct bpf_cpumask *cpumask) +{ +if (!cpu_valid (cpu)) +return ;I don't think we'll be able to get rid of this with
KF_CPUor special suffix. The argument might be a variable and not a constant at the verification time. We would have to allow passing unknown vars otherwise the UX will be too restrictive, so this run-time check would have to stay.
Quoted 2 lines
Makes sense. We'll just leave it as is then and document that passing in cpu >=
nr_cpusis silently ignored for any kfunc taking a cpu argument.
Eventually we can clean it up with bpf_assert infra.
kernel test robot
build botRe: [PATCH bpf-next 4/8] bpf: Enable cpumasks to be queried and used as kptrs
In reply to David VernetThank you for the patch! Perhaps something to improve:
Hi David,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on bpf-next/master]
url: https://github.com/intel-lab-lkp/linux/commits/David-Vernet/bpf-Enable-annotating-trusted-nested-pointers/20230120-080139 base: https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git master patch link: https://lore.kernel.org/r/20230119235833.2948341-5-void%40manifault.com patch subject: [PATCH bpf-next 4/8] bpf: Enable cpumasks to be queried and used as kptrs config: i386-randconfig-a015 (https://download.01.org/0day-ci/archive/20230120/[email protected]/config) compiler: clang version 14.0.6 (https://github.com/llvm/llvm-project f28c006a5895fc0e329fe15fead81e37457cb1d1)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/11541205c58f2226e5ffbc5967317469d65efac6
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review David-Vernet/bpf-Enable-annotating-trusted-nested-pointers/20230120-080139 git checkout 11541205c58f2226e5ffbc5967317469d65efac6
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=i386 olddefconfig COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=i386 SHELL=/bin/bash
If you fix the issue, kindly add following tag where applicable | Reported-by: kernel test robot <[email protected]>
All warnings (new ones prefixed by >>):
>> kernel/bpf/cpumask.c:38:21: warning: no previous prototype for function 'bpf_cpumask_create' [-Wmissing-prototypes]
struct bpf_cpumask *bpf_cpumask_create(void)
^
kernel/bpf/cpumask.c:38:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
struct bpf_cpumask *bpf_cpumask_create(void)
^
static
>> kernel/bpf/cpumask.c:52:21: warning: no previous prototype for function 'bpf_cpumask_acquire' [-Wmissing-prototypes]
struct bpf_cpumask *bpf_cpumask_acquire(struct bpf_cpumask *cpumask)
^
kernel/bpf/cpumask.c:52:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
struct bpf_cpumask *bpf_cpumask_acquire(struct bpf_cpumask *cpumask)
^
static
>> kernel/bpf/cpumask.c:58:21: warning: no previous prototype for function 'bpf_cpumask_kptr_get' [-Wmissing-prototypes]
struct bpf_cpumask *bpf_cpumask_kptr_get(struct bpf_cpumask **cpumaskp)
^
kernel/bpf/cpumask.c:58:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
struct bpf_cpumask *bpf_cpumask_kptr_get(struct bpf_cpumask **cpumaskp)
^
static
>> kernel/bpf/cpumask.c:76:6: warning: no previous prototype for function 'bpf_cpumask_release' [-Wmissing-prototypes]
void bpf_cpumask_release(struct bpf_cpumask *cpumask)
^
kernel/bpf/cpumask.c:76:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
void bpf_cpumask_release(struct bpf_cpumask *cpumask)
^
static
>> kernel/bpf/cpumask.c:88:5: warning: no previous prototype for function 'bpf_cpumask_first' [-Wmissing-prototypes]
u32 bpf_cpumask_first(const struct cpumask *cpumask)
^
kernel/bpf/cpumask.c:88:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
u32 bpf_cpumask_first(const struct cpumask *cpumask)
^
static
>> kernel/bpf/cpumask.c:93:5: warning: no previous prototype for function 'bpf_cpumask_first_zero' [-Wmissing-prototypes]
u32 bpf_cpumask_first_zero(const struct cpumask *cpumask)
^
kernel/bpf/cpumask.c:93:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
u32 bpf_cpumask_first_zero(const struct cpumask *cpumask)
^
static
>> kernel/bpf/cpumask.c:98:6: warning: no previous prototype for function 'bpf_cpumask_set_cpu' [-Wmissing-prototypes]
void bpf_cpumask_set_cpu(u32 cpu, struct bpf_cpumask *cpumask)
^
kernel/bpf/cpumask.c:98:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
void bpf_cpumask_set_cpu(u32 cpu, struct bpf_cpumask *cpumask)
^
static
>> kernel/bpf/cpumask.c:106:6: warning: no previous prototype for function 'bpf_cpumask_clear_cpu' [-Wmissing-prototypes]
void bpf_cpumask_clear_cpu(u32 cpu, struct bpf_cpumask *cpumask)
^
kernel/bpf/cpumask.c:106:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
void bpf_cpumask_clear_cpu(u32 cpu, struct bpf_cpumask *cpumask)
^
static
>> kernel/bpf/cpumask.c:114:6: warning: no previous prototype for function 'bpf_cpumask_test_cpu' [-Wmissing-prototypes]
bool bpf_cpumask_test_cpu(u32 cpu, const struct cpumask *cpumask)
^
kernel/bpf/cpumask.c:114:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
bool bpf_cpumask_test_cpu(u32 cpu, const struct cpumask *cpumask)
^
static
>> kernel/bpf/cpumask.c:122:6: warning: no previous prototype for function 'bpf_cpumask_test_and_set_cpu' [-Wmissing-prototypes]
bool bpf_cpumask_test_and_set_cpu(u32 cpu, struct bpf_cpumask *cpumask)
^
kernel/bpf/cpumask.c:122:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
bool bpf_cpumask_test_and_set_cpu(u32 cpu, struct bpf_cpumask *cpumask)
^
static
>> kernel/bpf/cpumask.c:130:6: warning: no previous prototype for function 'bpf_cpumask_test_and_clear_cpu' [-Wmissing-prototypes]
bool bpf_cpumask_test_and_clear_cpu(u32 cpu, struct bpf_cpumask *cpumask)
^
kernel/bpf/cpumask.c:130:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
bool bpf_cpumask_test_and_clear_cpu(u32 cpu, struct bpf_cpumask *cpumask)
^
static
>> kernel/bpf/cpumask.c:138:6: warning: no previous prototype for function 'bpf_cpumask_setall' [-Wmissing-prototypes]
void bpf_cpumask_setall(struct bpf_cpumask *cpumask)
^
kernel/bpf/cpumask.c:138:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
void bpf_cpumask_setall(struct bpf_cpumask *cpumask)
^
static
>> kernel/bpf/cpumask.c:143:6: warning: no previous prototype for function 'bpf_cpumask_clear' [-Wmissing-prototypes]
void bpf_cpumask_clear(struct bpf_cpumask *cpumask)
^
kernel/bpf/cpumask.c:143:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
void bpf_cpumask_clear(struct bpf_cpumask *cpumask)
^
static
>> kernel/bpf/cpumask.c:148:6: warning: no previous prototype for function 'bpf_cpumask_and' [-Wmissing-prototypes]
bool bpf_cpumask_and(struct bpf_cpumask *dst,
^
kernel/bpf/cpumask.c:148:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
bool bpf_cpumask_and(struct bpf_cpumask *dst,
^
static
>> kernel/bpf/cpumask.c:155:6: warning: no previous prototype for function 'bpf_cpumask_or' [-Wmissing-prototypes]
void bpf_cpumask_or(struct bpf_cpumask *dst,
^
kernel/bpf/cpumask.c:155:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
void bpf_cpumask_or(struct bpf_cpumask *dst,
^
static
>> kernel/bpf/cpumask.c:162:6: warning: no previous prototype for function 'bpf_cpumask_xor' [-Wmissing-prototypes]
void bpf_cpumask_xor(struct bpf_cpumask *dst,
^
kernel/bpf/cpumask.c:162:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
void bpf_cpumask_xor(struct bpf_cpumask *dst,
^
static
>> kernel/bpf/cpumask.c:169:6: warning: no previous prototype for function 'bpf_cpumask_equal' [-Wmissing-prototypes]
bool bpf_cpumask_equal(const struct cpumask *src1, const struct cpumask *src2)
^
kernel/bpf/cpumask.c:169:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
bool bpf_cpumask_equal(const struct cpumask *src1, const struct cpumask *src2)
^
static
>> kernel/bpf/cpumask.c:174:6: warning: no previous prototype for function 'bpf_cpumask_intersects' [-Wmissing-prototypes]
bool bpf_cpumask_intersects(const struct cpumask *src1, const struct cpumask *src2)
^
kernel/bpf/cpumask.c:174:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
bool bpf_cpumask_intersects(const struct cpumask *src1, const struct cpumask *src2)
^
static
>> kernel/bpf/cpumask.c:179:6: warning: no previous prototype for function 'bpf_cpumask_subset' [-Wmissing-prototypes]
bool bpf_cpumask_subset(const struct cpumask *src1, const struct cpumask *src2)
^
kernel/bpf/cpumask.c:179:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
bool bpf_cpumask_subset(const struct cpumask *src1, const struct cpumask *src2)
^
static
>> kernel/bpf/cpumask.c:184:6: warning: no previous prototype for function 'bpf_cpumask_empty' [-Wmissing-prototypes]
bool bpf_cpumask_empty(const struct cpumask *cpumask)
^
kernel/bpf/cpumask.c:184:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
bool bpf_cpumask_empty(const struct cpumask *cpumask)
^
static
kernel/bpf/cpumask.c:189:6: warning: no previous prototype for function 'bpf_cpumask_full' [-Wmissing-prototypes]
bool bpf_cpumask_full(const struct cpumask *cpumask)
^
kernel/bpf/cpumask.c:189:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
bool bpf_cpumask_full(const struct cpumask *cpumask)
^
static
kernel/bpf/cpumask.c:194:6: warning: no previous prototype for function 'bpf_cpumask_copy' [-Wmissing-prototypes]
void bpf_cpumask_copy(struct bpf_cpumask *dst, const struct cpumask *src)
^
kernel/bpf/cpumask.c:194:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
void bpf_cpumask_copy(struct bpf_cpumask *dst, const struct cpumask *src)
^
static
kernel/bpf/cpumask.c:199:5: warning: no previous prototype for function 'bpf_cpumask_any' [-Wmissing-prototypes]
u32 bpf_cpumask_any(const struct cpumask *cpumask)
^
kernel/bpf/cpumask.c:199:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
u32 bpf_cpumask_any(const struct cpumask *cpumask)
^
static
kernel/bpf/cpumask.c:204:5: warning: no previous prototype for function 'bpf_cpumask_any_and' [-Wmissing-prototypes]
u32 bpf_cpumask_any_and(const struct cpumask *src1, const struct cpumask *src2)
^ kernel/bpf/cpumask.c:204:1: note: declare 'static' if the function is not intended to be used outside of this translation unit u32 bpf_cpumask_any_and(const struct cpumask *src1, const struct cpumask *src2)
^
static
24 warnings generated.
vim +/bpf_cpumask_create +38 kernel/bpf/cpumask.c
37
> 38 struct bpf_cpumask *bpf_cpumask_create(void)
39 {
40 struct bpf_cpumask *cpumask;
41
42 cpumask = bpf_mem_alloc(&bpf_cpumask_ma, sizeof(*cpumask));
43 if (!cpumask)
44 return NULL;
45
46 memset(cpumask, 0, sizeof(*cpumask));
47 refcount_set(&cpumask->usage, 1);
48
49 return cpumask;
50 }
51
> 52 struct bpf_cpumask *bpf_cpumask_acquire(struct bpf_cpumask *cpumask)
53 {
54 refcount_inc(&cpumask->usage);
55 return cpumask;
56 }
57
> 58 struct bpf_cpumask *bpf_cpumask_kptr_get(struct bpf_cpumask **cpumaskp)
59 {
60 struct bpf_cpumask *cpumask;
61
62 /* The BPF memory allocator frees memory backing its caches in an RCU
63 * callback. Thus, we can safely use RCU to ensure that the cpumask is
64 * safe to read.
65 */
66 rcu_read_lock();
67
68 cpumask = READ_ONCE(*cpumaskp);
69 if (cpumask && !refcount_inc_not_zero(&cpumask->usage))
70 cpumask = NULL;
71
72 rcu_read_unlock();
73 return cpumask;
74 }
75
> 76 void bpf_cpumask_release(struct bpf_cpumask *cpumask)
77 {
78 if (!cpumask)
79 return;
80
81 if (refcount_dec_and_test(&cpumask->usage)) {
82 migrate_disable();
83 bpf_mem_free(&bpf_cpumask_ma, cpumask);
84 migrate_enable();
85 }
86 }
87
> 88 u32 bpf_cpumask_first(const struct cpumask *cpumask)
89 {
90 return cpumask_first(cpumask);
91 }
92
> 93 u32 bpf_cpumask_first_zero(const struct cpumask *cpumask)
94 {
95 return cpumask_first_zero(cpumask);
96 }
97
> 98 void bpf_cpumask_set_cpu(u32 cpu, struct bpf_cpumask *cpumask)
99 {
100 if (!cpu_valid(cpu))
101 return;
102
103 cpumask_set_cpu(cpu, (struct cpumask *)cpumask);
104 }
105
> 106 void bpf_cpumask_clear_cpu(u32 cpu, struct bpf_cpumask *cpumask)
107 {
108 if (!cpu_valid(cpu))
109 return;
110
111 cpumask_clear_cpu(cpu, (struct cpumask *)cpumask);
112 }
113
> 114 bool bpf_cpumask_test_cpu(u32 cpu, const struct cpumask *cpumask)
115 {
116 if (!cpu_valid(cpu))
117 return false;
118
119 return cpumask_test_cpu(cpu, (struct cpumask *)cpumask);
120 }
121
> 122 bool bpf_cpumask_test_and_set_cpu(u32 cpu, struct bpf_cpumask *cpumask)
123 {
124 if (!cpu_valid(cpu))
125 return false;
126
127 return cpumask_test_and_set_cpu(cpu, (struct cpumask *)cpumask);
128 }
129
> 130 bool bpf_cpumask_test_and_clear_cpu(u32 cpu, struct bpf_cpumask *cpumask)
131 {
132 if (!cpu_valid(cpu))
133 return false;
134
135 return cpumask_test_and_clear_cpu(cpu, (struct cpumask *)cpumask);
136 }
137
> 138 void bpf_cpumask_setall(struct bpf_cpumask *cpumask)
139 {
140 cpumask_setall((struct cpumask *)cpumask);
141 }
142
> 143 void bpf_cpumask_clear(struct bpf_cpumask *cpumask)
144 {
145 cpumask_clear((struct cpumask *)cpumask);
146 }
147
> 148 bool bpf_cpumask_and(struct bpf_cpumask *dst,
149 const struct cpumask *src1,
150 const struct cpumask *src2)
151 {
152 return cpumask_and((struct cpumask *)dst, src1, src2);
153 }
154
> 155 void bpf_cpumask_or(struct bpf_cpumask *dst,
156 const struct cpumask *src1,
157 const struct cpumask *src2)
158 {
159 cpumask_or((struct cpumask *)dst, src1, src2);
160 }
161
> 162 void bpf_cpumask_xor(struct bpf_cpumask *dst,
163 const struct cpumask *src1,
164 const struct cpumask *src2)
165 {
166 cpumask_xor((struct cpumask *)dst, src1, src2);
167 }
168
> 169 bool bpf_cpumask_equal(const struct cpumask *src1, const struct cpumask *src2)
170 {
171 return cpumask_equal(src1, src2);
172 }
173
> 174 bool bpf_cpumask_intersects(const struct cpumask *src1, const struct cpumask *src2)
175 {
176 return cpumask_intersects(src1, src2);
177 }
178
> 179 bool bpf_cpumask_subset(const struct cpumask *src1, const struct cpumask *src2)
180 {
181 return cpumask_subset(src1, src2);
182 }
183
> 184 bool bpf_cpumask_empty(const struct cpumask *cpumask)
185 {
186 return cpumask_empty(cpumask);
187 }
188
> 189 bool bpf_cpumask_full(const struct cpumask *cpumask)
190 {
191 return cpumask_full(cpumask);
192 }
193
> 194 void bpf_cpumask_copy(struct bpf_cpumask *dst, const struct cpumask *src)
195 {
196 cpumask_copy((struct cpumask *)dst, src);
197 }
198
> 199 u32 bpf_cpumask_any(const struct cpumask *cpumask)
200 {
201 return cpumask_any(cpumask);
202 }
203
> 204 u32 bpf_cpumask_any_and(const struct cpumask *src1, const struct cpumask *src2) 205 {
206 return cpumask_any_and(src1, src2);
207 }
208
Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests
PATCH 5/8 selftests/bpf: Add nested trust selftests suite
In reply to David VernetNow that defining trusted fields in a struct is supported, we should add selftests to verify the behavior. This patch adds a few such testcases.
--- tools/testing/selftests/bpf/DENYLIST.s390x | 1 + .../selftests/bpf/prog_tests/nested_trust.c | 64 +++++++++++++++++++ .../selftests/bpf/progs/nested_trust_common.h | 12 ++++ .../bpf/progs/nested_trust_failure.c | 33 ++++++++++ .../bpf/progs/nested_trust_success.c | 29 +++++++++ 5 files changed, 139 insertions(+) create mode 100644 tools/testing/selftests/bpf/prog_tests/nested_trust.c create mode 100644 tools/testing/selftests/bpf/progs/nested_trust_common.h create mode 100644 tools/testing/selftests/bpf/progs/nested_trust_failure.c create mode 100644 tools/testing/selftests/bpf/progs/nested_trust_success.c
tools/testing/selftests/bpf/DENYLIST.s390x +1 -0
@@ -44,6 +44,7 @@ map_kptr # failed to open_and_load program: -524 modify_return # modify_return attach failed: -524 (trampoline) module_attach # skel_attach skeleton attach failed: -524 (trampoline) mptcp +nested_trust # JIT does not support calling kernel function netcnt # failed to load BPF skeleton 'netcnt_prog': -7 (?) probe_user # check_kprobe_res wrong kprobe res from probe read (?) rcu_read_lock # failed to find kernel BTF type ID of '__x64_sys_getpgid': -3 (?)
tools/testing/selftests/bpf/prog_tests/nested_trust.c new file +64 -0
64 lines not on this page · raw message
tools/testing/selftests/bpf/progs/nested_trust_common.h new file +12 -0
@@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2023 Meta Platforms, Inc. and affiliates. */ + +#ifndef _NESTED_TRUST_COMMON_H +#define _NESTED_TRUST_COMMON_H + +#include <stdbool.h> + +bool bpf_cpumask_test_cpu(unsigned int cpu, const struct cpumask *cpumask) __ksym; +bool bpf_cpumask_first_zero(const struct cpumask *cpumask) __ksym; + +#endif /* _NESTED_TRUST_COMMON_H */
tools/testing/selftests/bpf/progs/nested_trust_failure.c new file +33 -0
@@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2023 Meta Platforms, Inc. and affiliates. */ + +#include <vmlinux.h> +#include <bpf/bpf_tracing.h> +#include <bpf/bpf_helpers.h> +#include "bpf_misc.h" + +#include "nested_trust_common.h" + +char _license[] SEC("license") = "GPL"; + +/* Prototype for all of the program trace events below: +* +* TRACE_EVENT(task_newtask, +* TP_PROTO(struct task_struct *p, u64 clone_flags) +*/ + +SEC("tp_btf/task_newtask") +__failure __msg("R2 must be referenced or trusted") +int BPF_PROG(test_invalid_nested_user_cpus, struct task_struct *task, u64 clone_flags) +{ +bpf_cpumask_test_cpu (0 , task->user_cpus_ptr); +return 0 ; +} + +SEC("tp_btf/task_newtask") +__failure __msg("R1 must have zero offset when passed to release func or trusted arg to kfunc") +int BPF_PROG(test_invalid_nested_offset, struct task_struct *task, u64 clone_flags) +{ +bpf_cpumask_first_zero (&task->cpus_mask); +return 0 ; +}
tools/testing/selftests/bpf/progs/nested_trust_success.c new file +29 -0
@@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2023 Meta Platforms, Inc. and affiliates. */ + +#include <vmlinux.h> +#include <bpf/bpf_tracing.h> +#include <bpf/bpf_helpers.h> + +#include "nested_trust_common.h" + +char _license[] SEC("license") = "GPL"; + +int pid, err; + +static bool is_test_task (void ) +{ +int cur_pid =bpf_get_current_pid_tgid () >>32 ; + +return pid == cur_pid; +} + +SEC("tp_btf/task_newtask") +int BPF_PROG (test_read_cpumask ,struct task_struct *task,u64 clone_flags) +{ +if (!is_test_task ()) +return 0 ; + +bpf_cpumask_test_cpu (0 , task->cpus_ptr); +return 0 ; +}
Signature · 1 line
2.39.0
Re: [PATCH bpf-next 5/8] selftests/bpf: Add nested trust selftests suite
Quoted 88 lines · David Vernet
Now that defining trusted fields in a struct is supported, we should add selftests to verify the behavior. This patch adds a few such testcases.
Signed-off-by David Vernet <[email protected]>--- tools/testing/selftests/bpf/DENYLIST.s390x | 1 + .../selftests/bpf/prog_tests/nested_trust.c | 64 +++++++++++++++++++ .../selftests/bpf/progs/nested_trust_common.h | 12 ++++ .../bpf/progs/nested_trust_failure.c | 33 ++++++++++ .../bpf/progs/nested_trust_success.c | 29 +++++++++ 5 files changed, 139 insertions(+) create mode 100644 tools/testing/selftests/bpf/prog_tests/nested_trust.c create mode 100644 tools/testing/selftests/bpf/progs/nested_trust_common.h create mode 100644 tools/testing/selftests/bpf/progs/nested_trust_failure.c create mode 100644 tools/testing/selftests/bpf/progs/nested_trust_success.ctools/testing/selftests/bpf/DENYLIST.s390x +1
-0@@ -44,6 +44,7 @@ map_kptr # failed to open_and_load program: -524 modify_return # modify_return attach failed: -524 (trampoline) module_attach # skel_attach skeleton attach failed: -524 (trampoline) mptcp +nested_trust # JIT does not support calling kernel function netcnt # failed to load BPF skeleton 'netcnt_prog': -7 (?) probe_user # check_kprobe_res wrong kprobe res from probe read (?) rcu_read_lock # failed to find kernel BTF type ID of '__x64_sys_getpgid': -3 (?)tools/testing/selftests/bpf/prog_tests/nested_trust.c new file +54
-0@@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2023 Meta Platforms, Inc. and affiliates. */ + +#include <test_progs.h> +#include "nested_trust_failure.skel.h" +#include "nested_trust_success.skel.h" + +static const char *const nested_trust_success_testcases[] = { +"test_read_cpumask" , +}; + +static void verify_success (const char *prog_name) +{ +struct nested_trust_success *skel; +struct bpf_program *prog; +struct bpf_link *link =NULL ; +int status; +pid_t child_pid; + + skel =nested_trust_success__open (); +if (!ASSERT_OK_PTR (skel,"nested_trust_success__open" )) +return ; + + skel->bss->pid =getpid (); + +nested_trust_success__load (skel); +if (!ASSERT_OK_PTR (skel,"nested_trust_success__load" )) + goto cleanup; + + prog =bpf_object__find_program_by_name (skel->obj, prog_name); +if (!ASSERT_OK_PTR (prog,"bpf_object__find_program_by_name" )) + goto cleanup; + + link =bpf_program__attach (prog); +if (!ASSERT_OK_PTR (link,"bpf_program__attach" )) + goto cleanup; + + child_pid =fork (); +if (!ASSERT_GT (child_pid,-1 ,"child_pid" )) + goto cleanup; +if (child_pid ==0 ) +_exit (0 ); +waitpid (child_pid, &status,0 ); +ASSERT_OK (skel->bss->err,"post_wait_err" ); + +bpf_link__destroy (link); + +cleanup: +nested_trust_success__destroy (skel); +} + +void test_nested_trust (void ) +{ +int i;
tools/testing/selftests/bpf/prog_tests/nested_trust.c line 64
Quoted 10 lines
tools/testing/selftests/bpf/prog_tests/nested_trust.c new file +10
-0+ +for (i =0 ; i <ARRAY_SIZE (nested_trust_success_testcases); i++) { +if (!test__start_subtest (nested_trust_success_testcases[i])) +continue ; + +verify_success (nested_trust_success_testcases[i]); + } + +RUN_TESTS (nested_trust_failure); +}
Hmm. I thought RUN_TESTS() works for successes too. Looking at test_loader.c:run_subtest() that should be the case. Could you please double check?verify_success() above shouldn't be needed.
Re: [PATCH bpf-next 5/8] selftests/bpf: Add nested trust selftests suite
Quoted 96 lines · Alexei Starovoitov
Quoted 95 lines · David Vernet
Now that defining trusted fields in a struct is supported, we should add selftests to verify the behavior. This patch adds a few such testcases.
Signed-off-by David Vernet <[email protected]>--- tools/testing/selftests/bpf/DENYLIST.s390x | 1 + .../selftests/bpf/prog_tests/nested_trust.c | 64 +++++++++++++++++++ .../selftests/bpf/progs/nested_trust_common.h | 12 ++++ .../bpf/progs/nested_trust_failure.c | 33 ++++++++++ .../bpf/progs/nested_trust_success.c | 29 +++++++++ 5 files changed, 139 insertions(+) create mode 100644 tools/testing/selftests/bpf/prog_tests/nested_trust.c create mode 100644 tools/testing/selftests/bpf/progs/nested_trust_common.h create mode 100644 tools/testing/selftests/bpf/progs/nested_trust_failure.c create mode 100644 tools/testing/selftests/bpf/progs/nested_trust_success.ctools/testing/selftests/bpf/DENYLIST.s390x +1
-0@@ -44,6 +44,7 @@ map_kptr # failed to open_and_load program: -524 modify_return # modify_return attach failed: -524 (trampoline) module_attach # skel_attach skeleton attach failed: -524 (trampoline) mptcp +nested_trust # JIT does not support calling kernel function netcnt # failed to load BPF skeleton 'netcnt_prog': -7 (?) probe_user # check_kprobe_res wrong kprobe res from probe read (?) rcu_read_lock # failed to find kernel BTF type ID of '__x64_sys_getpgid': -3 (?)tools/testing/selftests/bpf/prog_tests/nested_trust.c new file +61
-0@@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2023 Meta Platforms, Inc. and affiliates. */ + +#include <test_progs.h> +#include "nested_trust_failure.skel.h" +#include "nested_trust_success.skel.h" + +static const char *const nested_trust_success_testcases[] = { +"test_read_cpumask" , +}; + +static void verify_success (const char *prog_name) +{ +struct nested_trust_success *skel; +struct bpf_program *prog; +struct bpf_link *link =NULL ; +int status; +pid_t child_pid; + + skel =nested_trust_success__open (); +if (!ASSERT_OK_PTR (skel,"nested_trust_success__open" )) +return ; + + skel->bss->pid =getpid (); + +nested_trust_success__load (skel); +if (!ASSERT_OK_PTR (skel,"nested_trust_success__load" )) + goto cleanup; + + prog =bpf_object__find_program_by_name (skel->obj, prog_name); +if (!ASSERT_OK_PTR (prog,"bpf_object__find_program_by_name" )) + goto cleanup; + + link =bpf_program__attach (prog); +if (!ASSERT_OK_PTR (link,"bpf_program__attach" )) + goto cleanup; + + child_pid =fork (); +if (!ASSERT_GT (child_pid,-1 ,"child_pid" )) + goto cleanup; +if (child_pid ==0 ) +_exit (0 ); +waitpid (child_pid, &status,0 ); +ASSERT_OK (skel->bss->err,"post_wait_err" ); + +bpf_link__destroy (link); + +cleanup: +nested_trust_success__destroy (skel); +} + +void test_nested_trust (void ) +{ +int i; + +for (i =0 ; i <ARRAY_SIZE (nested_trust_success_testcases); i++) { +if (!test__start_subtest (nested_trust_success_testcases[i])) +continue ; + +verify_success (nested_trust_success_testcases[i]); + }
Quoted 8 lines
tools/testing/selftests/bpf/prog_tests/nested_trust.c line 64
Quoted 3 lines
tools/testing/selftests/bpf/prog_tests/nested_trust.c new file +3
-0+ +RUN_TESTS (nested_trust_failure); +}Hmm. I thought
RUN_TESTS()works for successes too. Looking at test_loader.c:run_subtest() that should be the case. Could you please double check?verify_success()above shouldn't be needed.
Yes, looks like RUN_TESTS() works for success cases too, it just isn't used anywhere yet. I expect it won't be super commonly used given that it only loads the program and tests the verifier rather than doing any runtime validation, but that's exactly what we want for this so I'll update that in v2. I'll plan on leaving the cpumask success cases as they are unless you object so that we can get runtime coverage as well.
PATCH 6/8 selftests/bpf: Add selftest suite for cpumask kfuncs
In reply to David VernetA recent patch added a new set of kfuncs for allocating, freeing, manipulating, and querying cpumasks. This patch adds a new 'cpumask' selftest suite which verifies their behavior.
--- tools/testing/selftests/bpf/DENYLIST.s390x | 1 + .../selftests/bpf/prog_tests/cpumask.c | 74 +++ .../selftests/bpf/progs/cpumask_common.h | 114 +++++ .../selftests/bpf/progs/cpumask_failure.c | 125 +++++ .../selftests/bpf/progs/cpumask_success.c | 426 ++++++++++++++++++ 5 files changed, 740 insertions(+) create mode 100644 tools/testing/selftests/bpf/prog_tests/cpumask.c create mode 100644 tools/testing/selftests/bpf/progs/cpumask_common.h create mode 100644 tools/testing/selftests/bpf/progs/cpumask_failure.c create mode 100644 tools/testing/selftests/bpf/progs/cpumask_success.c
tools/testing/selftests/bpf/DENYLIST.s390x +1 -0
@@ -13,6 +13,7 @@ cgroup_hierarchical_stats # JIT does not support calling kernel f cgrp_kfunc # JIT does not support calling kernel function cgrp_local_storage # prog_attach unexpected error: -524 (trampoline) core_read_macros # unknown func bpf_probe_read#4 (overlapping) +cpumask # JIT does not support calling kernel function d_path # failed to auto-attach program 'prog_stat': -524 (trampoline) decap_sanity # JIT does not support calling kernel function (kfunc) deny_namespace # failed to attach: ERROR: strerror_r(-524)=22 (trampoline)
tools/testing/selftests/bpf/prog_tests/cpumask.c new file +74 -0
74 lines not on this page · raw message
tools/testing/selftests/bpf/progs/cpumask_common.h new file +114 -0
114 lines not on this page · raw message
tools/testing/selftests/bpf/progs/cpumask_failure.c new file +125 -0
125 lines not on this page · raw message
tools/testing/selftests/bpf/progs/cpumask_success.c new file +426 -0
426 lines not on this page · raw message
Signature · 1 line
2.39.0
PATCH 7/8 bpf/docs: Document cpumask kfuncs in a new file
In reply to David VernetNow that we've added a series of new cpumask kfuncs, we should document them so users can easily use them. This patch adds a new cpumasks.rst file to document them.
--- Documentation/bpf/cpumasks.rst | 357 +++++++++++++++++++++++++++++++++ Documentation/bpf/index.rst | 1 + Documentation/bpf/kfuncs.rst | 11 + kernel/bpf/cpumask.c | 208 +++++++++++++++++++ 4 files changed, 577 insertions(+) create mode 100644 Documentation/bpf/cpumasks.rst
Documentation/bpf/cpumasks.rst new file +357 -0
@@ -0,0 +1,357 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _cpumasks-header-label: + +================== +BPF cpumask kfuncs +================== + +1. Introduction +=============== + +``struct cpumask`` is a bitmap data structure in the kernel whose indices +reflect the CPUs on the system. Commonly, cpumasks are used to track which CPUs +a task is affinitized to, but they can also be used to e.g. track which cores +are associated with a scheduling domain, which cores on a machine are idle, +etc. + +BPF provides programs with a set of :ref:`kfuncs-header-label` that can be +used to allocate, mutate, query, and free cpumasks. + +2. BPF cpumask objects +====================== + +There are two different types of cpumasks that can be used by BPF programs. + +2.1 ``struct bpf_cpumask *`` +---------------------------- + +``struct bpf_cpumask *`` is a cpumask that is allocated by BPF, on behalf of a +BPF program, and whose lifecycle is entirely controlled by BPF. These cpumasks +are RCU-protected, can be mutated, can be used as kptrs, and can be safely cast +to a ``struct cpumask *``. + +2.1.1 ``struct bpf_cpumask *`` lifecycle +---------------------------------------- + +A ``struct bpf_cpumask *`` is allocated, acquired, and released, using the +following functions: + +.. kernel-doc:: kernel/bpf/cpumask.c + :identifiers: bpf_cpumask_create + +.. kernel-doc:: kernel/bpf/cpumask.c + :identifiers: bpf_cpumask_acquire + +.. kernel-doc:: kernel/bpf/cpumask.c + :identifiers: bpf_cpumask_release + +For example: + +.. code-block:: c + + /** + * A trivial example tracepoint program that shows how to + * acquire and release a struct bpf_cpumask *. + */ + SEC("tp_btf/task_newtask") + int BPF_PROG(task_acquire_release_example, struct task_struct *task, u64 clone_flags) + { + struct bpf_cpumask *cpumask, *acquired; + + cpumask = bpf_cpumask_create(); + if (!cpumask) + return 1; + + acquired = bpf_cpumask_acquire(cpumask); + bpf_cpumask_release(cpumask); + bpf_cpumask_acquire(acquired); + + return 0; + } + +---- + +2.1.1 ``struct bpf_cpumask *`` as kptrs +--------------------------------------- + +As mentioned above, these ``struct bpf_cpumask *`` objects can also be stored +in a map and used as kptrs. If a ``struct bpf_cpumask *`` is in a map, the +reference can be removed from the map with bpf_kptr_xchg(), or +opportunistically acquired with bpf_cpumask_kptr_get(): + + +.. kernel-doc:: kernel/bpf/cpumask.c + :identifiers: bpf_cpumask_kptr_get + +Here is an example of a ``struct bpf_cpumask *`` being retrieved from a map: + +.. code-block:: c + + /* struct containing the struct bpf_cpumask kptr which is actually stored in the map. */ + struct __bpf_cpumasks_kfunc_map_value { + struct bpf_cpumask __kptr_ref * bpf_cpumask; + }; + + /* The map containing struct __bpf_cpumasks_kfunc_map_value entries. */ + struct { + __uint(type, BPF_MAP_TYPE_ARRAY); + __type(key, int); + __type(value, struct __bpf_cpumasks_kfunc_map_value); + __uint(max_entries, 1); + } __bpf_cpumasks_kfunc_map SEC(".maps"); + + /* ... */ + + /** + * A simple example tracepoint program showing how a + * struct bpf_cpumask * kptr that is stored in a map can + * be acquired using the bpf_cpumask_kptr_get() kfunc. + */ + SEC("tp_btf/cgroup_mkdir") + int BPF_PROG(cgrp_ancestor_example, struct cgroup *cgrp, const char *path) + { + struct bpf_cpumask *kptr; + struct __bpf_cpumasks_kfunc_map_value *v; + u32 key = 0; + + /* Assume a bpf_cpumask * kptr was previously stored in the map. */ + v = bpf_map_lookup_elem(&__bpf_cpumasks_kfunc_map, &key); + if (!v) + return -ENOENT; + + /* Acquire a reference to the bpf_cpumask * kptr that's already stored in the map. */ + kptr = bpf_cpumask_kptr_get(&v->cpumask); + if (!kptr) + /* If no bpf_cpumask was present in the map, it's because + * we're racing with another CPU that removed it with + * bpf_kptr_xchg() between the bpf_map_lookup_elem() + * above, and our call to bpf_cpumask_kptr_get(). + * bpf_cpumask_kptr_get() internally safely handles this + * race, and will return NULL if the cpumask is no longer + * present in the map by the time we invoke the kfunc. + */ + return -EBUSY; + + /* Free the reference we just took above. Note that the + * original struct bpf_cpumask * kptr is still in the map. It will + * be freed either at a later time if another context deletes + * it from the map, or automatically by the BPF subsystem if + * it's still present when the map is destroyed. + */ + bpf_cpumask_release(kptr); + + return 0; + } + +---- + +2.2 ``struct cpumask`` +---------------------- + +``struct cpumask`` is the object that actually contains the cpumask bitmap +being queried, mutated, etc. A ``struct bpf_cpumask`` wraps a ``struct +cpumask``, which is why it's safe to cast it as such (note however that it is +**not** safe to cast a ``struct cpumask *`` to a ``struct bpf_cpumask *``, and +the verifier will reject any program that tries to do so). + +As we'll see below, any kfunc that mutates its cpumask argument will take a +``struct bpf_cpumask *`` as that argument. Any argument that simply queries the +cpumask will instead take a ``struct cpumask *``. + +3. cpumask kfuncs +================= + +Above, we described the kfuncs that can be used to allocate, acquire, release, +etc a ``struct bpf_cpumask *``. This section of the document will describe the +kfuncs for mutating and querying cpumasks. + +3.1 Mutating cpumasks +--------------------- + +Some cpumask kfuncs are "read-only" in that they don't mutate any of their +arguments, whereas others mutate at least one argument (which means that the +argument must be a ``struct bpf_cpumask *``, as described above). + +This section will describe all of the cpumask kfuncs which mutate at least one +argument. :ref:`cpumasks-querying-label` below describes the read-only kfuncs. + +3.1.1 Setting and clearing CPUs +------------------------------- + +bpf_cpumask_set_cpu() and bpf_cpumask_clear_cpu() can be used to set and clear +a CPU in a ``struct bpf_cpumask`` respectively: + +.. kernel-doc:: kernel/bpf/cpumask.c + :identifiers: bpf_cpumask_set_cpu bpf_cpumask_clear_cpu + +These kfuncs are pretty straightforward, and can be used, for example, as +follows: + +.. code-block:: c + + /** + * A sample tracepoint showing how a cpumask can be queried. + */ + SEC("tp_btf/task_newtask") + int BPF_PROG(test_set_clear_cpu, struct task_struct *task, u64 clone_flags) + { + struct bpf_cpumask *cpumask; + + cpumask = bpf_cpumask_create(); + if (!cpumask) + return -ENOMEM; + + bpf_cpumask_set_cpu(0, cpumask); + if (!bpf_cpumask_test_cpu(0, cast(cpumask))) + /* Should never happen. */ + goto release_exit; + + bpf_cpumask_clear_cpu(0, cpumask); + if (bpf_cpumask_test_cpu(0, cast(cpumask))) + /* Should never happen. */ + goto release_exit; + + /* struct cpumask * pointers such as task->cpus_ptr can also be queried. */ + if (bpf_cpumask_test_cpu(0, task->cpus_ptr)) + bpf_printk("task %s can use CPU %d", task->comm, 0); + + release_exit: + bpf_cpumask_release(cpumask); + return 0; + } + +---- + +bpf_cpumask_test_and_set_cpu() and bpf_cpumask_test_and_clear_cpu() are +analogous kfuncs that allow callers to atomically test and set (or clear) CPUs: + +.. kernel-doc:: kernel/bpf/cpumask.c + :identifiers: bpf_cpumask_test_and_set_cpu bpf_cpumask_test_and_clear_cpu + +---- + +We can also set and clear entire ``struct bpf_cpumask *`` objects in one +operation using bpf_cpumask_setall() and bpf_cpumask_clear(): + +.. kernel-doc:: kernel/bpf/cpumask.c + :identifiers: bpf_cpumask_setall bpf_cpumask_clear + +3.1.2 Operations between cpumasks +--------------------------------- + +In addition to setting and clearing individual CPUs in a single cpumask, +callers can also perform bitwise operations between multiple cpumasks using +bpf_cpumask_and(), bpf_cpumask_or(), and bpf_cpumask_xor(): + +.. kernel-doc:: kernel/bpf/cpumask.c + :identifiers: bpf_cpumask_and bpf_cpumask_or bpf_cpumask_xor + +The following is an example of how they may be used. Note that some of the +kfuncs shown in this example will be covered in more detail below. + +.. code-block:: c + + /** + * A sample tracepoint showing how a cpumask can be mutated using + bitwise operators (and queried). + */ + SEC("tp_btf/task_newtask") + int BPF_PROG(test_set_clear_cpu, struct task_struct *task, u64 clone_flags) + { + struct bpf_cpumask *mask1, *mask2, *dst1, *dst2; + int ret = -EINVAL; + + mask1 = bpf_cpumask_create(); + if (!mask1) + return -ENOMEM; + + mask2 = bpf_cpumask_create(); + if (!mask2) { + bpf_cpumask_release(mask1); + return -ENOMEM; + } + + // ...Safely create the other two masks... */ + + bpf_cpumask_set_cpu(0, mask1); + bpf_cpumask_set_cpu(1, mask2); + bpf_cpumask_and(dst1, (const struct cpumask *)mask1, (const struct cpumask *)mask2); + if (!bpf_cpumask_empty((const struct cpumask *)dst1)) + /* Should never happen. */ + goto release_exit; + + bpf_cpumask_or(dst1, (const struct cpumask *)mask1, (const struct cpumask *)mask2); + if (!bpf_cpumask_test_cpu(0, (const struct cpumask *)dst1)) + /* Should never happen. */ + goto release_exit; + + if (!bpf_cpumask_test_cpu(1, (const struct cpumask *)dst1)) + /* Should never happen. */ + goto release_exit; + + bpf_cpumask_xor(dst2, (const struct cpumask *)mask1, (const struct cpumask *)mask2); + if (!bpf_cpumask_equal((const struct cpumask *)dst1, + (const struct cpumask *)dst2)) + /* Should never happen. */ + goto release_exit; + + err = 0; + + release_exit: + bpf_cpumask_release(mask1); + bpf_cpumask_release(mask2); + bpf_cpumask_release(dst1); + bpf_cpumask_release(dst2); + return 0; + } + +---- + +The contents of an entire cpumask may be copied to another using +bpf_cpumask_copy(): + +.. kernel-doc:: kernel/bpf/cpumask.c + :identifiers: bpf_cpumask_copy + +---- + +.. _cpumasks-querying-label: + +3.2 Querying cpumasks +--------------------- + +In addition to the above kfuncs, there is also a set of read-only kfuncs that +can be used to query the contents of cpumasks. + +.. kernel-doc:: kernel/bpf/cpumask.c + :identifiers: bpf_cpumask_first bpf_cpumask_first_zero bpf_cpumask_test_cpu + +.. kernel-doc:: kernel/bpf/cpumask.c + :identifiers: bpf_cpumask_equal bpf_cpumask_intersects bpf_cpumask_subset + bpf_cpumask_empty bpf_cpumask_full + +.. kernel-doc:: kernel/bpf/cpumask.c + :identifiers: bpf_cpumask_any bpf_cpumask_any_and + +---- + +Some example usages of these querying kfuncs were shown above. We will not +replicate those exmaples here. Note, however, that all of the aforementioned +kfuncs are tested in `tools/testing/selftests/bpf/progs/cpumask_success.c`_, so +please take a look there if you're looking for more examples of how they can be +used. + +.. _tools/testing/selftests/bpf/progs/cpumask_success.c: + https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/tools/testing/selftests/bpf/progs/cpumask_success.c + + +4. Adding BPF cpumask kfuncs +============================ + +The set of supported BPF cpumask kfuncs are not (yet) a 1-1 match with the +cpumask operations in include/linux/cpumask.h. Any of those cpumask operations +could easily be encapsulated in a new kfunc if and when required. If you'd like +to support a new cpumask operation, please feel free to submit a patch. If you +do add a new cpumask kfunc, please document it here, and add any relevant +selftest testcases to the cpumask selftest suite.
Documentation/bpf/index.rst +1 -0
@@ -20,6 +20,7 @@ that goes into great technical depth about the BPF Architecture. syscall_api helpers kfuncs + cpumasks programs maps bpf_prog_run
Documentation/bpf/kfuncs.rst +11 -0
@@ -1,3 +1,7 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _kfuncs-header-label: + ============================= BPF Kernel Functions (kfuncs) =============================
@@ -420,3 +424,10 @@ the verifier. bpf_cgroup_ancestor() can be used as follows: bpf_cgroup_release(parent); return 0; } + +3.3 struct cpumask * kfuncs +--------------------------- + +BPF provides a set of kfuncs that can be used to query, allocate, mutate, and +destroy struct cpumask * objects. Please refer to :ref:`cpumasks-header-label` +for more details.
kernel/bpf/cpumask.c +208 -0
341 lines not on this page · raw message
Signature · 1 line
2.39.0
Re: [PATCH bpf-next 7/8] bpf/docs: Document cpumask kfuncs in a new file
Quoted 14 lines · David Vernet
Documentation/bpf/cpumasks.rst new file +14
-0+ +For example: + +.. code-block:: c + + /** + * A trivial example tracepoint program that shows how to + * acquire and release a struct bpf_cpumask *. + */ + SEC("tp_btf/task_newtask") + int BPF_PROG(task_acquire_release_example, struct task_struct *task, u64 clone_flags) + { + struct bpf_cpumask *cpumask, *acquired; +
Documentation/bpf/cpumasks.rst line 71
Quoted 10 lines
Documentation/bpf/cpumasks.rst new file +10
-0+ cpumask = bpf_cpumask_create(); + if (!cpumask) + return 1; + + acquired = bpf_cpumask_acquire(cpumask); + bpf_cpumask_release(cpumask); + bpf_cpumask_acquire(acquired); + + return 0; + }
As the first example in the doc it was... alarming :)
I've read it as it says that bpf_cpumask_acquire has to be called on freshly created cpumask before it can be used.
I've started to doubt by code reading skills of the previous patches :) A basic example is probably necessary to introduce the concept. Or this example should have bpf_cpumask_set_cpu right after create and more alu ops after release with comments to demonstrate the point.
Re: [PATCH bpf-next 7/8] bpf/docs: Document cpumask kfuncs in a new file
Quoted 21 lines · Alexei Starovoitov
Quoted 20 lines · David Vernet
Documentation/bpf/cpumasks.rst new file +20
-0+ +For example: + +.. code-block:: c + + /** + * A trivial example tracepoint program that shows how to + * acquire and release a struct bpf_cpumask *. + */ + SEC("tp_btf/task_newtask") + int BPF_PROG(task_acquire_release_example, struct task_struct *task, u64 clone_flags) + { + struct bpf_cpumask *cpumask, *acquired; + + cpumask = bpf_cpumask_create(); + if (!cpumask) + return 1; + + acquired = bpf_cpumask_acquire(cpumask); + bpf_cpumask_release(cpumask);
Quoted 8 lines
Documentation/bpf/cpumasks.rst line 71
Quoted 4 lines
Documentation/bpf/cpumasks.rst new file +4
-0+ bpf_cpumask_acquire(acquired); + + return 0; + }As the first example in the doc it was... alarming :) I've read it as it says that
bpf_cpumask_acquirehas to be called on freshly created cpumask before it can be used.
That's fair, I treated this example like a testcase :-)
Quoted 4 lines
I've started to doubt by code reading skills of the previous patches :) A basic example is probably necessary to introduce the concept. Or this example should have
bpf_cpumask_set_cpuright after create and more alu ops after release with comments to demonstrate the point.
Makes sense. I'll update the examples to be more clear and reflect realistic use cases.
PATCH 8/8 bpf/docs: Document how nested trusted fields may be defined
In reply to David VernetA prior change defined a new BTF_TYPE_SAFE_NESTED macro in the verifier which allows developers to specify when a pointee field in a struct type should inherit its parent pointer's trusted status. This patch updates the kfuncs documentation to specify this macro and how it can be used.
--- Documentation/bpf/kfuncs.rst | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-)
Documentation/bpf/kfuncs.rst +21 -1
@@ -167,7 +167,8 @@ KF_ACQUIRE and KF_RET_NULL flags. The KF_TRUSTED_ARGS flag is used for kfuncs taking pointer arguments. It indicates that the all pointer arguments are valid, and that all pointers to BTF objects have been passed in their unmodified form (that is, at a zero -offset, and without having been obtained from walking another pointer). +offset, and without having been obtained from walking another pointer, with one +exception described below). There are two types of pointers to kernel objects which are considered "valid":
@@ -180,6 +181,25 @@ KF_TRUSTED_ARGS kfuncs, and may have a non-zero offset. The definition of "valid" pointers is subject to change at any time, and has absolutely no ABI stability guarantees. +As mentioned above, a nested pointer obtained from walking a trusted pointer is +no longer trusted, with one exception. If a struct type has a field that is +guaranteed to be valid as long as its parent pointer is trusted, the +``BTF_TYPE_SAFE_NESTED`` macro can be used to express that to the verifier as +follows: + +.. code-block:: c + + BTF_TYPE_SAFE_NESTED(struct task_struct) { + const cpumask_t *cpus_ptr; + }; + +In other words, you must: + +1. Wrap the trusted pointer type in the ``BTF_TYPE_SAFE_NESTED`` macro. + +2. Specify the type and name of the trusted nested field. This field must match + the field in the original type definition exactly. + 2.4.6 KF_SLEEPABLE flag -----------------------
Signature · 1 line
2.39.0