Skip to contentSkip to conversation

sunxi: dts: arm64: update devicetree files

PATCH New Andre Przywara 1 participant 1 message Jan 21, 2023

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 sunxi: dts: arm64: update devicetree files

Sync the devicetree files from the Linux kernel repo, v6.2-rc2. This enables GPU power management in the kernel for the H6, enables Bluetooth on the Pinebook, and enables USB on the H616 devices (just for newer Linux kernels at the moment, U-Boot support is pending).

As before, this omits the non-backwards compatible changes to the R_INTC controller, to remain compatible with older kernels.

---
 arch/arm/dts/axp803.dtsi                    |  10 --
 arch/arm/dts/sun50i-a64-pinebook.dts        |  14 ++
 arch/arm/dts/sun50i-h6-beelink-gs1.dts      |   1 +
 arch/arm/dts/sun50i-h6-gpu-opp.dtsi         |  87 +++++++++++
 arch/arm/dts/sun50i-h6.dtsi                 |  52 ++++++-
 arch/arm/dts/sun50i-h616-orangepi-zero2.dts |  41 +++++
 arch/arm/dts/sun50i-h616-x96-mate.dts       |  25 +++
 arch/arm/dts/sun50i-h616.dtsi               | 160 ++++++++++++++++++++
 8 files changed, 378 insertions(+), 12 deletions(-)
 create mode 100644 arch/arm/dts/sun50i-h6-gpu-opp.dtsi
arch/arm/dts/axp803.dtsi +0 -10
index 578ef368e2b..a6b4b87f185 100644
@@ -25,16 +25,6 @@
 		compatible = "x-powers,axp803-gpio", "x-powers,axp813-gpio";
 		gpio-controller;
 		#gpio-cells = <2>;
-
-		gpio0_ldo: gpio0-ldo-pin {
-			pins = "GPIO0";
-			function = "ldo";
-		};
-
-		gpio1_ldo: gpio1-ldo-pin {
-			pins = "GPIO1";
-			function = "ldo";
-		};
 	};
 
 	battery_power_supply: battery-power {
arch/arm/dts/sun50i-a64-pinebook.dts +14 -0
index c00c4c1e9e7..576eae13223 100644
@@ -406,6 +406,20 @@
 	status = "okay";
 };
 
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723cs-bt";
+		device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+		enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+		host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	};
+};
+
 &usb_otg {
 	dr_mode = "host";
 };
arch/arm/dts/sun50i-h6-beelink-gs1.dts +1 -0
index 649b146dfff..d6897ec9799 100644
@@ -5,6 +5,7 @@
 
 #include "sun50i-h6.dtsi"
 #include "sun50i-h6-cpu-opp.dtsi"
+#include "sun50i-h6-gpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
arch/arm/dts/sun50i-h6-gpu-opp.dtsi new file +87 -0

87 lines not on this page · raw message

arch/arm/dts/sun50i-h6.dtsi +50 -2

71 lines not on this page · raw message

arch/arm/dts/sun50i-h616-orangepi-zero2.dts +41 -0

58 lines not on this page · raw message

arch/arm/dts/sun50i-h616-x96-mate.dts +25 -0
index 6619db34714..07424c28b69 100644
@@ -32,6 +32,14 @@
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
 &ir {
 	status = "okay";
 };
@@ -54,6 +62,14 @@
 	status = "okay";
 };
 
+&ohci0 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
 &r_rsb {
 	status = "okay";
 
@@ -175,3 +191,12 @@
 	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
+
+&usbotg {
+	dr_mode = "host";	/* USB A type receptable */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
arch/arm/dts/sun50i-h616.dtsi +160 -0

166 lines not on this page · raw message

Signature · 1 line
2.35.5